{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
We recommend MindTheGApps. OpenGApps should work, but please make sure you clearly mention the gapps you're using when reporting bugs.
Get CarbonROM
Join the CarbonROM Discord server
GitHub
Gerrit
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonRom Noct Oreo 8.1, ROM for the Asus ZenFone 3
Contributors
makorn645
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.2.x, Unlocked BL
Based On: AOSP
Version Information
Status: Stable
Created 2018-04-16
Last Updated 2018-09-12
Bugs:
- You tell me
ScreenShots:
Reserved
[Changelog]
20180706
- Merged July ASB. (8.1.0_r36)
- Switched tu enforcing selinux & user builds.
- Fixed FM speaker audio.
- Fixed FlashLight Gesture.
- Return ov le Doze App.
- Updated Adreno, SDM, Vulkan blobs from Tissot
- Added SoundRecorder App.
- Fix dark camera on enforcing.
- Merged 3.18.114 & latest caf tags.
- More bugs to fix.
Special Thanks to @planet9:
* Moore SEPolicy.
* Re-Enabled ANT+ support.
20180610
- Merge 8.1.0_r30.
- Port directly show pin from LineageOS.
- Port FlipFlap (flipcover app) from LineageOS.
- Fine tune KCal values.
- Some Icons for AsusParts.
- Add disable keys to AsusParts (TODO: Implement device keyhandler.)
- Update vendor from latest stock.
- Merge linux 3.18.112 and latest caf tag into kernel.
- Some sepolicy.
Thanks to @planet9
- FlipFlap support
- Some Performance tweaks
- Lower dpi for ZE520KL
- Some Camera sepolicy.
20180523:
- More sepolicy
- some fixes
20180508:
- May Security Patch
- Some fixes
20180422:
- Updated proprietary blobs from stock .53
- Fixed navbar switch
- Kcal configuration support for device app
- sepolicy bringup
- Some improvements to fpservice - @planet9
- Updated prima drivers - @planet9
Notes: Enforcing isn't recommended atm (camera hal and init scripts still need more policies addressed).
20180416:
- Initial Build.
Noice. Good job @makorn645
Will it work on ZE520KL variant?
m0bileb0y said:
Will it work on ZE520KL variant?
Click to expand...
Click to collapse
Of course
Thx for the rom
[email protected] said:
Of course
Click to expand...
Click to collapse
Thanx for the answer!
glad to see Carbon rom for the ZenFone 3 <3
have you applied for official yet?
Woow!! Thx for the rom.
Okay things seem to be fine,but navigation bar isn't working on my device.Clean flash here!
K.rockr said:
glad to see Carbon rom for the ZenFone 3 <3
have you applied for official yet?
Click to expand...
Click to collapse
ืืI'll apply when I feel it's ready
mk_bomber96 said:
Okay things seem to be fine,but navigation bar isn't working on my device.Clean flash here!
Click to expand...
Click to collapse
It'll be fixed in the next build.
Thank you so much for the ROM!
But where can I find the list of features of this ROM? Maybe I'm so stupid I coundn't find it anywhere.
And if anyone has tried this ROM, how you feel about it, I mean about battery life, stock cam, substratum working or not?
tkhquang said:
Thank you so much for the ROM!
But where can I find the list of features of this ROM? Maybe I'm so stupid I coundn't find it anywhere.
And if anyone has tried this ROM, how you feel about it, I mean about battery life, stock cam, substratum working or not?
Click to expand...
Click to collapse
You should try it out. Keep in mind this is aosp based so there you won't get any lineage goodies in but you'll get a buttery smooth experience out of it.
battery life? It depends how you use it. It should be as good as any other ROM out there.
mk_bomber96 said:
Okay things seem to be fine,but navigation bar isn't working on my device.Clean flash here!
Click to expand...
Click to collapse
you should be able to get the "Navigation Bar", once you get into the phone Settings and you can activate it in there.
( i have seen this behaviour in other ROMs before )
metaxda said:
you should be able to get the "Navigation Bar", once you get into the phone Settings and you can activate it in there.
( i have seen this behaviour in other ROMs before )
Click to expand...
Click to collapse
Erm...this is a bug (we enabled this in Settings and the Nav bar won't pop out)
@makorn645 is planning to fix this on the next build.
m0bileb0y said:
Will it work on ZE520KL variant?
Click to expand...
Click to collapse
Yes, it'll work.
New carbon build's up
Download: HERE
Changes:
- Updated proprietary blobs from stock .53
- Fixed navbar switch
- Kcal configuration support for device app
- sepolicy bringup
- Some improvements to fpservice - @planet9
- Updated prima drivers - @planet9
Note: Enforcing isn't recommended atm (camera hal and init scripts still need more policies addressed).
makorn645 said:
New carbon build's up
Download: HERE
Changes:
- Updated proprietary blobs from stock .53
- Fixed navbar switch
- Kcal configuration support for device app
- sepolicy bringup
- Some improvements to fpservice - @planet9
- Updated prima drivers - @planet9
Note: Enforcing isn't recommended atm (camera hal and init scripts still need more policies addressed).[
Is it support substratum theams fully???
Click to expand...
Click to collapse
Ankit Roy said:
makorn645 said:
New carbon build's up
Download: HERE
Changes:
- Updated proprietary blobs from stock .53
- Fixed navbar switch
- Kcal configuration support for device app
- sepolicy bringup
- Some improvements to fpservice - @planet9
- Updated prima drivers - @planet9
Note: Enforcing isn't recommended atm (camera hal and init scripts still need more policies addressed).[
Is it support substratum theams fully???
Click to expand...
Click to collapse
Yes it does, But you need to activate it from settings.
Click to expand...
Click to collapse
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[UNOFFICIAL] CarbonROM for the Z5 Compact [Suzuran]
From the CarbonROM team
"CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy."
Please feel free to look, build, and use the code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read the FAQ, which can be found on the carbonrom website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Ask a question on the official IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Downloads:
Get CarbonROM!
Carbon Suzuran GitHub
Gerrit
Kernel source
HUGE Shoutout to @myself5 for all the help in porting this rom!
If you enjoy this rom why not Donate to support future releases
NOTICE:
It has been really fun porting and Lineage and Carbonrom top the Z5C, and it has been amazing to see you guys (The community) try it out for yourselves and make your own builds. Due to my Z5C being broke I have passed it on to a recycling company - meaning I can no longer test or update builds. Please do feel free to link your own builds in the comments (As long as they do not breach the rules of course )
Thanks for the support this year - and I want to thank those who are keeping their own builds up to date!
XDA:DevDB Information
[ROM][SUZURAN]Carbon ROM cr5.1, ROM for the Sony Xperia Z5 Compact
Contributors
nzzane, Myself5
Source Code: https://github.com/CarbonROM
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader - TWRP 3.0.2
Based On: AOSP
Version Information
Status: Nightly
Current Stable Version: 20170507
Stable Release Date: 2017-05-07
Beta Release Date: 2017-01-22
Created 2017-01-16
Last Updated 2017-12-20
Click to expand...
Click to collapse
Installing CarbonROM
INSTALLATION:
Download the latest CarbonROM zip from the download link in the OP
Download GAPPS Arm64 - 7.1
Reboot into recovery and make a backup incase something goes wrong
Wipe Data - System - Delvik and Cache
Flash CarbonROM and gapps in recovery and reboot your device - Screen may be black then go to a purple LED, it will then boot to the carbonROM bootlogo - this is normal!
Reboot and enjoy!
Full Changelog from CarbonROM (Some will not be pushed into my releases due to incompatibilities)
Code:
[COLOR="Blue"]2017-09-03[/COLOR]: [Latest]
Updated device brightness [URL="https://gist.github.com/zachariasmaladroit/10ad7d4190f22b3a9c5c309846bc8ecf"]Thanks to zacharias.maladroit[/URL]
General stability and some security patches
Kernel patched as per the [URL="https://github.com/nzzane/android_kernel_sony_msm8994/commit/bd9380a1443858941178bc9b5520d0527a9c1bb6"]Git[/URL]
[COLOR="Black"]20170901[/COLOR]:
Source updates
Wakelocks disabled some more
battery improved (kernel modifications & updated)
WiFi and bluetooth battery impact lowered (hopefully)
Security patches
General stability and useability
[COLOR="Black"]20170719[/COLOR]:
-Added device configs to stop wakelocks
-Added device config for fingerprint service (Needs more work to stop screen off recognition)
-Misc fixes and improvements
[COLOR="Black"]20170618[/COLOR]:
- Attempt to fix wakelocks (adjusting kernel configs)
- Lineage and Suzuran source updates
-Stability
-Theme resource update
-Camera service runs better
-Phone app smoother
-Fingerprint unlock speed is better and more reliable
-Webapp is more stable
-Framework boosts
[COLOR="Black"]20170519-0546[/COLOR]:
- Removed Media_codecs_ffmpeg.xml (Youtube works)
- Added wifi kernel modules
- Fingerprint kernel modules
- Media codecs fixed for playback
- Stability
- Attempt to fix wakelocks (adjusting kernel configs)
- Lineage and Suzuran source updates
[COLOR="Black"]07-2-17[/COLOR]:
-f2fs fixed
-Minor stability improvements
-Fixed some memory leaks
[COLOR="Black"]29-1-17[/COLOR]:
-Added some Camera files (May or may not work)
-Stability improvements
-Deciding whether to keep doing this changelog ;)
-Fixed Permissions
-Lockscreen charging symbol
-Fixed permission when booting into charging status
-Fixed filesystem lookup
-Some other stuff (Check out the CarbonROM changelog for most of the changes)
[COLOR="Black"]26-1-17[/COLOR]:
-Battery icon improvements
-CarbonFibers: Battery customizations
-Better battery text
-Battery Styles
-Ambient light / faster changing
-Modded colour picker
-Seconds option to clock
-Stability / speed improvements
-Some more battery icon adjustments
-Kernel upgrades
-Wifi upgrades
-Core android upgrades
-Aquired some files from Lineage
[COLOR="Black"]25-1-17[/COLOR]:
-Omnistyle: Added Carbon designs headers
-Fixed red outlines on the screen
-Wifi / bluetooth enhancements
[COLOR="Black"]24-1-17[/COLOR]:
-nothing too exciting
-minor improvements
[COLOR="Black"]22-1-17[/COLOR]:
-Clearall to recents
-Some minor improvements
-Wifi Fixed
17-1-17: Planned Initial Release
20-1-17: V1.0
-Merged sumire audio files with Suzuran
Things not working:
Code:
Wakelocks may still be affecting the battery life
nzzane, great to see another ROM for our Z5c :good:
Any specific suzuran bugs? Would this classify as a daily driver?
Are there some Screenshots of the ROM?
The Website shows an Error at clicking Screenshots.
Raz0Rfail said:
Are there some Screenshots of the ROM?
The Website shows an Error at clicking Screenshots.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=JlahTo4d-UU
?
Anyone have tested that rom?
I used carbonrom on my htc m7 Last year !!
Cool rom on my htc.
What's working and what's not working? Can someone post it??
WOW!!
so many thanks!Let us taste it.
emosis said:
What's working and what's not working? Can someone post it??
Click to expand...
Click to collapse
Just fixing some small things up since the first release (which had some small bugs that stopped it installing)
It is a port based off the Z5 version, fingerprint works but can be buggy at times (don't quote me on this) camera can also be buggy but is usable
More to come as I make sure it is fit for release
nzzane said:
Just fixing some small things up since the first release (which had some small bugs that stopped it installing)
It is a port based off the Z5 version, fingerprint works but can be buggy at times (don't quote me on this) camera can also be buggy but is usable
More to come as I make sure it is fit for release
Click to expand...
Click to collapse
Can I dowload this build now, or wait?
rtimoff said:
Can I dowload this build now, or wait?
Click to expand...
Click to collapse
There is an audio file causing the rom to no longer boot, am looking into this with myself5 - hopefully be fixed tonight guys!
All fixed
Is this one using the stock kernel and vendor blobs just as with the 7.x.x roms myself5 has done on the z5 thread?
How difficult would it be to integrate them? Apparently it really boosts camera performance and quality as well as calling volume...
Thanks, mate
I can't find any suzuran(z5c)-specific stuff in this rom. Is this due to the issues in the repos?
Berni-0815 said:
I can't find any suzuran(z5c)-specific stuff in this rom. Is this due to the issues in the repos?
Click to expand...
Click to collapse
So, Berni, wanna help?
Once this gets released and is in working order I will be working with myself5 (more like asking him how to do it ) to get the stock blobs into this rom
He and the CarbonROM team are already trying to impliment stock blobs so it shouldn't be too hard
IF ANYONE wants to help out https://paste.myself5.de/hGO2cED9w4.rb this is the point at which the rom starts to no longer boot
rtimoff said:
So, Berni, wanna help?
Click to expand...
Click to collapse
Yes... :angel:
---------- Post added at 23:21 ---------- Previous post was at 23:20 ----------
nzzane said:
IF ANYONE wants to help out https://paste.myself5.de/hGO2cED9w4.rb this is the point at which the rom starts to no longer boot
Click to expand...
Click to collapse
This is MUCH to strange for me; sorry... (and for my bad english)
Couldn't we just copy the z5 device tree from lineage repo and use the suzuran diffconfig script which is already included there?
Lemming0815 said:
and use the suzuran diffconfig script which is already included there?
Click to expand...
Click to collapse
Where are those scripts? Sorry for this question, but I'm just doing my first steps in this materia...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
Notice:
You need to flash FIX everytime you flash the ROM, for the ROM to get flashed and support OTA updates.
The ROM doesn't tinker with the persist partition and hence it won't alter your MAC addresses don't you worry about it and don't keep asking about that in the thread again and again.
And yeah, the VoLTE icon is missing but VoLTE works just fine, You don't need to worry about that too.
Downloads:
FIX
Get CarbonROM
OpenGApps
TWRP-Installer
Latest Magisk
Install Instructions:
Download the ROM and Gapps
Move your FIX.zip + ROM.zip + [GApps] + TWRP-Installer.zip to your internal storage
Boot into TWRP for OREO - (3.2.1-2 preferred) ->Wipe Data & Cache -> Flash the FIX.zip followed by ROM zip and finally the TWRP-Installer.zip
Reboot to Recovery via TWRP (Reboot -> Recovery) , Flash Magisk and GApps
Reboot to System -> Enjoy CarbonROM
CarbonROM Website
Changelogs
Join the Carbon ROM-Tissot Support Group
Join the CarbonROM Discord Server
GitHub
Gerrit
XDA:DevDB Information
CarbonROM for Tissot, ROM for the Xiaomi Mi A1
Contributors
VenkatVV
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Weekly
Created 2018-05-08
Last Updated 2018-08-11
RESERVED
Thanks to: Carbon Team, Abhishek, TEAM OREO and all the testers who tested my builds
ROM Changelogs
Device Specific Changelogs:
08-05-2018:
*Initial Build
15-05-2018:
1.Enable Camera1 API for legacy targets.
2.Updated blobs to 8.1
3.Updated vendor blobs
4.Updated cam blob list
5.Overwrite mac address if config file exists
6.Ship and enable atfwd daemon
7.Enable battery light settings for tissot
8.Ship with a different kernel(based on void kernel)
9.Overall changes in source and trees to improve performance and experience
22-05-2018:
* Upstreamed Kernel to 3.18.109
* Compiled kernel with clang
* CTS Mismatch Fixed
* Overall changes in source and trees to improve experience
29-05-2018:
* Carbon Upstream
* Upstreamed Kernel to 3.18.110
* NavBar Enabling/Disabling issue fixed
* Fixed USB tethering not working for users
* BT Mac should now be readable
* Added Missing atfwd dependency to DT and Vendor
* Adjust MODEM_PA_MITIGATION and MODEM_PROC_TEMP_MITIGATION as per stock mido
* Generated thermal-engine.conf
* Added displayconfig to vendor
05-06-2018
* Carbon Upstream
* Merged latest June security patches
* Upstreamed Kernel to 3.18.112
* Merged latest CAF tags
* gpt-utils: fix block path for non ufs devices
12-06-2018
*Set GPU and CPU Max speed to stock speeds on boot
*Camera: Only link and use vendor.qti.hardware.camera.device if specified
*Camera: CameraHardwareInterface changes to support Extended FD
*audiopolicy: Add AudioSessionInfo API
05-07-2018
* Carbon Upstream
* Merged latest July security patches
* Upstreamed Kernel to 3.18.114
* Merged latest CAF tags
*drivers: prima: Update to CAF Tag LA.UM.6.6.r1-09000-89xx.0
* fixed bluetooth crash on boot
11-08-2018
* Carbon Upstream
* Merged latest August security patches
* Upstreamed Kernel to 3.18.116
* Merged latest CAF tags
* drivers: prima: Update to CAF Tag LA.UM.6.6.r1-09200-89xx.0
* Update V1.0 media profiles
* Enable display always on feature
* Set Bootanimation to half-res (for faster boot)
*RESERVED*
Join the Carbon ROM-Tissot Support Group
&
Screenshots
Tez working?
sudipta08sarkar said:
Tez working?
Click to expand...
Click to collapse
Yes
Can you list out what's working and what's not? And looks like it supports OTA updates ?
Does this ROM have the function to prevent app from using mobile data completly?
Wow!, can't believe in my eyes!
Finally, carbon for A1!, thanks u guys!
The only reason i'm still love and use my Mi4 is that it running Carbon, battery life and performance is superb!
Downloading now
(I will report any bugs with logcat)
GVN.Gallus said:
Wow!, can't believe in my eyes!
Finally, carbon for A1!, thanks u guys!
The only reason i'm still love and use my Mi4 is that it running Carbon, battery life and performance is superb!
Downloading now
(I will report any bugs with logcat)
Click to expand...
Click to collapse
am using rom, no bugs as of. now, selinux is not fully functional though, but its initial build, great work, fan of carbon rom
AkashAlien said:
am using rom, no bugs as of. now, selinux is not fully functional though, but its initial build, great work, fan of carbon rom
Click to expand...
Click to collapse
What do you mean "selinux is not fully functional"?
I'm downloading with very slow speed, about 20kbps , test both on 4G and wired internet, took me 14hrs to finish
AkashAlien said:
am using rom, no bugs as of. now, selinux is not fully functional though, but its initial build, great work, fan of carbon rom
Click to expand...
Click to collapse
What do you mean selinux is not "fully functioning". It is set to enforcing and everything is working fine. What else do you mean?
Can we make feature requests here? If yes. Is it possible to add inbuilt themes like many other ROMs have?
What is this fix for ??? What does it fix ???
Why it won't flash without ??? Didn't see that before.
Are you able to suppress caller ID with this rom or does it end to network or simcard error ?
coremania said:
What is this fix for ??? What does it fix ???
Why it won't flash without ??? Didn't see that before.
Are you able to suppress caller ID with this rom or does it end to network or simcard error ?
Click to expand...
Click to collapse
"Carbon ROM Official builds are signed with custom keys like our stock ROM so inorder to flash the ROM it needs to verify the key for which though can be surpassed if we update the TWRP( it will take for me to do that) so, that fix.zip file replaces the key and adds OTA support to the ROM." ~ This is what developer told me when I asked him the same question.
And I didn't understand the suppress caller ID part. Can you elaborate?
rahulrishi said:
"Carbon ROM Official builds are signed with custom keys like our stock ROM so inorder to flash the ROM it needs to verify the key first which though can be surpassed if we update the TWRP so, that fix.zip file replaces the key and adds OTA support to the ROM." ~ This is what developer told me when I asked him the same question.
And I didn't understand the suppress caller ID part. Can you elaborate?
Click to expand...
Click to collapse
Thanks for info.
For the caller id, open your phone app and try to suppress your number on outgoing calls. On all custom roms I get Network or simcard error and the option stays grey. It only work on every stock rom so far. Doesn't matter which phone app i use, doesn't matter which gapps I flash.
Navigation bar isn't working
Thanks for the rom. Does it have a true OTA or does it only download a zip we must then flash via TWRP?
Also, is it possible to add Live Display instead of Night light?
neyvermore said:
Thanks for the rom. Does it have a true OTA or does it only download a zip we must then flash via TWRP?
Also, is it possible to add Live Display instead of Night light?
Click to expand...
Click to collapse
It has OTA, but he said he needs to fix TWRP first to support OTA.
most awaited rom finally on the ground.
Thanks CarbonRom team.
Edit-
After flashing the ROM it's not boot normally I forced it by pressing power key after it boot it's not detecting sim card so I can complete the setup wizard I'm only network data user no WiFi. I did clean flash wipe system wipe data wipe delvik and art cache then flash fix.zip, rom.zip, twrp.zip reboot to twrp flash gapps then mazisk 16.0.
I did flash mazisk first then gapps but no luck please correct me where I'm wrong
coremania said:
Thanks for info.
For the caller id, open your phone app and try to suppress your number on outgoing calls. On all custom roms I get Network or simcard error and the option stays grey. It only work on every stock rom so far. Doesn't matter which phone app i use, doesn't matter which gapps I flash.
Click to expand...
Click to collapse
Oh no idea about that, never used it. I will try and let you know
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS
ABOUT
ArrowOS is an AOSP based project started with the aim of keeping things simple, clean and neat. We added just the right and mostly used stuff that will be actually USEFUL at the end of the day.
Website : https://arrowos.net/
Github : https://github.com/ArrowOS
Code Review : https://review.arrowos.net/
E-mail : [email protected]
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
Android Auto, after disabled display flicker and black screen
you tell me
INSTRUCTIONS
You can find installation manual and other info in FAQ:
https://forum.xda-developers.com/showpost.php?p=78136273&postcount=3
DOWNLOADS
ROM: SF - Official build
Source code
Device Source
Kernel Source
Special thanks to
Bruno Martins
AOSP
LineageOS
Ezio Lacandia Bijelkic
Maxwen
Alex Cruz
scoute-dich
Tibor Kaputa
And all other Open Source - Developers,Teams and Organisations
DM if we missed someone - you can always look at GitHub to find more contributors! :highfive:
XDA:DevDB Information
ArrowOS, ROM for the Xiaomi Mi Mix 2S
Contributors
palaych
Source Code: https://github.com/ArrowOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.6.20+
Based On: AOSP
Version Information
Status: Beta
Last Updated 2019-08-06
Changelog:
18-02-2019:
update arrow sources
9.0.0_r31 with February Security Patch
Many other changes/fix
update devices trees:
merge some los commits
some change in auto-brightness
force enable volte and vowifi (need more test)
other changes/fix
update LOS kernel source, compile with clang 8.0.8
29-01-2019:
update arrow source
update devices trees:
Add DiracSound (for test)
Upstream last los commits
Update to 9.1.17 Global Blobs
update los kernel source
10-01-2019:
updated arrow sources:
Merge 9.0.0_r30 with January Security Patch
Update lockscreen weather omni
Add BoostFramework
Others changes/fix
full re-write devices tree and proprietary vendor:
Fix Alipay and WeChat fingerprint payment
Merge last los commits
Add WifiDispaly (wfd) support
Add perf blobs
Add hotword enrollment (OK Google)
Update blobs 8.12.20 global
Others improvements and clean
update los kernel sources
required fw and vendor 8.12.27 or newer
21-12-2018:
updated arrow sources
merge last los commits devices and add some config
last los kernel source with defconfig changes and compile with clang 8.0.6
12-12-2018:
update arrow source:
Android 9.0.0_r21 with December Security Patch
Other changes, see github
some fix/optimize tree devices
add/removed some xiaomi libs
rebase los kernel (all thx Bruno Martins):
new los source (rebase with xiaomi pie)
I made some fix to source and turned off/on something in defconfig (ttl target, sony controller, others...), otherwise it's los kernel.
removed aod
01-12-2018:
update arrow source
new kernel:
rebased on linux-stable tree with 4.9.141 version
merge caf tag 'LA.UM.6.3.r4-05800-sdm845.0' for kernel/wlan/techpack
enable ttl target
fix proximity sensor
update some doze config in devices
fix aptX/aptX-HD
some improvements devices tree
set selinux enforce
21-11-2018:
update arrow source
kang brightness values from marlin (now auto-brightnees works adequately)
deleted extra Xiaomi blobs
18-11-2018:
update arrow source
merge latest los commit to devices tree
some change values brightness
change doze config
activation AOD (disabled by default)
update and clean blobs to 8.11.15
kernel: stock los source with enabled ntfs r/w and ttl target
INSTALLATION PROCEDURE:
First installation (Clean flash):
Must be installed MIUI (firmware (fw) part) Android 9.0 (9.6.20 or newer)
Install my TWRP Unofficial.
Make FULL WIPE (system/vendor/data/dalvik/cache) and FORMAT DATA - YES.
Flash ROM (link in first post)
Flash gapps and Magisk, if need.
Reboot
If you're updating the ROM:
Use Updater app, download new build, click install and the device will reboot itself into TWRP and flash new build
Reboot
NOTE: If you have issues with Settings or Play Services force-closes or bootloop you need to clean flash (Method 1).
FREQUENTLY ASKED QUESTIONS:
Q: Which GApps do I use?
A: This Google Apps package is recommended: opengapps. I use nano, don't recommend stock/super.
Q: Where i can find firmware part MIUI (fw) for twrp?
A: You can download HERE
Q: Do I have to wipe data if coming from another ROM?
A: Yes, I will not be providing help/support to users that haven't wiped data when coming from another ROM.
Q: Is the ROM official?
A: Yes, with OTA. Update every bi-week.
Q: I use Telegram, where can I find help on that platform?
A: Official ArrowOS channel, the link is HERE
Q: What kernel you use?
A: ROM include los sources base kernel, but i use my custom kernel MiPa, you can install it after rom.
Q: What camera app you use?
A: I use Google Camera 6 mod by san1ty or B-S-G, you can download HERE
Thanks for porting it bro
The ROM is amazing!
Wow, thanks bro
nice bro give me an awp：好：
i will test it...
How is this rom compared to aosip?
Nice job and thx.
So far so good, but It looks like the Auto Brightness doesn't work well.
Love this rom. Slim, fast, stable and excellent battery life!
Everything works as it should. Auto brightness could be a little more refined and proximity sensor would be nice too. If only we could get updated sources...
Only downside is I have to choose between this and AOSiP.
And OTA updates would be a killer feature for the future.
Great ROMs are coming for this great device.
Camera
Hey, awesome rom. Thank you!
Everything seems to be working perfectly, even got google pay up and running!
The only problem is that the Camera app keeps crashing when i try to open it. Anyone knows a fix for this?
dannyspyro said:
Hey, awesome rom. Thank you!
Everything seems to be working perfectly, even got google pay up and running!
The only problem is that the Camera app keeps crashing when i try to open it. Anyone knows a fix for this?
Click to expand...
Click to collapse
I had that too the first time I installed the rom. Right after opening the app crashed. There were lots of process.media.android errors.
Did a clean install and after the installation I factory resetted. No problems since. Everything is fine. I'm using the latest BSG mod camera for the MI8.
Maybe this helps. I don't even know if the steps I took make any sense or if this affects the problem but it solved it for me.
@palaych: I have compared battery life between this rom and your AOSiP rom and there's a significant difference between the two.
I don't know if the stats are true but could you have a look into it?
First screenshot is Arrow OS, the second one is from AOSiP
I used the kernel that came with the rom, no customisations. All Google apps from the opengapps Pico package, no Magisk or other root.
Best regards
Kleinholzinferno
What are the differences in general ( features ) between the two ROMs ( ArrowsOS and AOSiP )?
Best regards.
Did a clean installation and look what happened:
Pfofeldix said:
What are the differences in general ( features ) between the two ROMs ( ArrowsOS and AOSiP )?
Best regards.
Click to expand...
Click to collapse
I think they're pretty much the same regarding the possibility of customisation. Unlike some other ROMs that are adjustable to the last animation these two ROMs focus on (what I believe) are the most important features.
They're customizable but not bloated with settings. Which I think is nice.
All the features I use are there and working well.
Bluetooth hands free is finally working with Android pie
As my main camera I use the BSG Mod camera. Just Google it. Night mode works, portrait works too.
All other apps I use are Google standard and they're working flawlessly. Even Android Auto is useable.
So depending on your needs I'd say give them. both a try and decide. In my opinion you can't go wrong with any of them as they are both fast, stable, slim and have many nice setting to adapt the look and feel to your needs.
Hope this helps
Best regards
Kleinholzinferno
Thanks for your explanation.
I´m using AOSiP since last weekend and it´s like you described it. :good:
So, I´m curious on ArrowOS and I will give it a try.
The only thing I don´t understand is that @palaych is spending a lot of
time on developing two ( really good, but ) similar-looking ROMs.
Best regards.
( Schönen Abend noch )
Pfofeldix said:
Thanks for your explanation.
I´m using AOSiP since last weekend and it´s like you described it. :good:
So, I´m curious on ArrowOS and I will give it a try.
The only thing I don´t understand is that @palaych is spending a lot of
time on developing two ( really good, but ) similar-looking ROMs.
Best regards.
( Schönen Abend noch )
Click to expand...
Click to collapse
Danke, dir auch!
As I said there are some differences but they are not as huge as between some other roms. The settings are a little different, the icons for some quick settings look different but all in all it's pretty equal.
What matter to me most is reliability and stability and both roms deliver!
I like the slim roms better. I had resurrection remix installed which is also a great rom btw but as I didn't use 75% of the settings it's pretty useless for me. Others may play around with animation styles and stuff but I don't so this is my favourite by now.
Sent from my Mi MIX 2S using XDA Labs
Does someone know how to disable fingerprint unlock vibration?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
Flash
Volte
Maybe more I haven't tested everything, let me know
Known issues:
You tell me
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Check #2 for Downloads
Open GApps
XDA:DevDB Information
AOSiP, ROM for the Xiaomi Redmi Note 7
Contributors
AmulyaX
Source Code: https://github.com/AOSiP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-07-07
Last Updated 2019-07-07
12/10/2019
-October Security Patch Merged
-Device tree fully rebased on my CAF Tree for LineageOS
-Proximity Sensor is more responsive
-Offline Charging Animation Added
-Updated Vendor Security Patch string as people wanted it
-FM has been fixed
-Widevine L1 support added
-WhatsApp VC Lag fixed
-Major stability and performance improvements
-Merged with latest sources
06/08/2019
-August Security Patch merged (9.0.0_r46)
-FM Fixed
-QS Styles merged
-Merged Translations
-Added support for custom sensors in doze
-Fix NPE when creates WiFi tracker
-Typographic Clock merged
-Decreased status bar height to match Notch
-Major Stability improvements
-Pixel4 Animations
-Improved OP Gestures
-Major stability and performance improvements
-Merged with latest sources
07/07/2019
-Initial Release
-HAL3 switch added
Android Open Source Illusion Project
Changelog
-Initial Release
-HAL3 switch added, thanks to @DarkDroidDev
Take note, this project is for my personal use and I am uploading here just so that everyone else can use it too, its pretty stable tbh, please do not spam for official. Have fun
1. Flash GApps along with ROM
2. CLEAN FLASH ONLY.
3. Build with Stock kernel, I recommend using Genom
4. No restrictions on Firmware you want to use
5. No need to flash vbmeta or Magisk (to boot), flash Magisk only if you want root
TAP HERE TO DOWNLOAD
Hello screen on device end home ?
Thanks
I love your work, the rom is fluid without lag, only when entering the custom settings sometimes the settings app is closed. thanks for your hard work
Are you planning on supporting this build long term? I am searching for a long term rom after Aosp Extended support ended.
AaxyatXDA said:
Are you planning on supporting this build long term? I am searching for a long term rom after Aosp Extended support ended.
Click to expand...
Click to collapse
He would be doing for his personal usage, as mentioned, so he'd do it whenever he will be free. No doubt you can use this ROM as long as you need, there won't be any critical bugs as @AmulyaX is a professional level Dev.
Cheers.
August Security Patch and a lot of other changes!
SourceForge and AFH both are giving me dumbass speeds on server as well as my laptop, so I can't share builds for now! Will upload tomorrow.
Derpferst aosip rom i tried wasnt good at all, sometimes screen flickers n goes blank den on back but dis is worth giving a trial regarding tha rom developer been a good recognised developer... :good:
AndroBuddy007 said:
He would be doing for his personal usage, as mentioned, so he'd do it whenever he will be free. No doubt you can use this ROM as long as you need, there won't be any critical bugs as @AmulyaX is a professional level Dev.
Cheers.
Click to expand...
Click to collapse
Disclosure: I didn't pay him to say this. ?
AmulyaX said:
Disclosure: I didn't pay him to say this. ?
Click to expand...
Click to collapse
Your sure ?
AmulyaX said:
Disclosure: I didn't pay him to say this. ?
Click to expand...
Click to collapse
False alert, he paid me 69 bucks for this?
Android Open Source Illusion Project
Changelog
-August Security Patch merged (9.0.0_r46)
-FM Fixed
-QS Styles merged
-Merged Translations
-Added support for custom sensors in doze
-Fix NPE when creates WiFi tracker
-Typographic Clock merged
-Decreased status bar height to match Notch
-Major Stability improvements
-Pixel4 Animations
-Improved OP Gestures
-Major stability and performance improvements
-Merged with latest sources
Take note, this project is for my personal use and I am uploading here just so that everyone else can use it too, its pretty stable tbh, please do not spam for official. Have fun
1. Flash GApps along with ROM
2. CLEAN FLASH ONLY.
3. Build with Stock kernel, I recommend using Genom
4. No restrictions on Firmware you want to use
5. No need to flash vbmeta or Magisk (to boot), flash Magisk only if you want root
TAP HERE TO DOWNLOAD
I want to know if the radio has been fixed, thank you
Thank you very much. My current rom is aex, I flash this rom, need wipe?
messay said:
Thank you very much. My current rom is aex, I flash this rom, need wipe?
Click to expand...
Click to collapse
yes offcourse since it is another rom.. not aosp extended
irundream said:
I want to know if the radio has been fixed, thank you
Click to expand...
Click to collapse
Yes it is, thanks for reminding me. I forgot to add it in changelog.
Thanks for dis great rom... Flashed and will test more but i was finking tha kernel of tha rom is genom and updated to 188 but its just stock kernel with 153 kernel....
Please in subsequent update, add Play qs... Thanks :good:
whalesplaho said:
Thanks for dis great rom... Flashed and will test more but i was finking tha kernel of tha rom is genom and updated to 188 but its just stock kernel with 153 kernel....
Please in subsequent update, add Play qs... Thanks :good:
Click to expand...
Click to collapse
I'll upstream stock to 188 by next update.
update: setting APN to: 3gnet, work ok.
I flash this rom,very smooth. But the phone can't connect to the mobile network, I use China Unicom's network.
AmulyaX said:
I'll upstream stock to 188 by next update.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR camera
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS/GNSS
VoLTE
Known issues:
You tell me (None)
Instructions :
Reboot to Recovery (Preferably Ofox)
Wipe system, data, vendor, cache, dalvik
Now flash the LineageOS build and any other addons you want
You may flash OpenGapps and or Magisk
Reboot
Note: If you're unable to download Netflix or some other app from Play Store and or if you're unable to use Widevine L1, please consider flashing Magisk.
Downloads :
Official Build : Here
Firmware : All firmwares for lavender are supported (Prefer latest Global Stable)[/URL]
XDA:DevDB Information
LineageOS, ROM for the Xiaomi Redmi Note 7
Contributors
AmulyaX, xdatman
Source Code: https://github.com/LineageOS
Kernel Source: https://gitlab.com/kjjjnob/kernel_xiaomi_lavender_minimal
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-09-17
Last Updated 2020-01-22
Changelog
15/02/2020
-February Security Patch
-Fixed BT mic issues
-Fixed some audio issues
-Updated more blobs from latest CAF tag
-Major stability and performance improvements from my previous releases
-Merged with latest sources
22/01/2020
-Initial Android 10 release
-January Security Patch
-Android 10 Blobs from Lavender Release
-Major stability and performance improvements from my previous releases
-Merged with latest sources
12/10/2019
-October Security Patch Merged
-Offline Charging Animation Added
-Updated Vendor Security Patch string as people wanted it
-FM has been fixed
-Widevine L1 support added
-WhatsApp VC Lag fixed
-Major stability and performance improvements
-Merged with latest sources
16/09/2019
-Initial Release
-Elliptic Proximity Sensor has been thoroughly fixed
-Rebased device tree on CAF
-Major performance, battery and stability improvements
Hello everyone!
Before this thread gets plagued with questions like what's different in this LineageOS build, let me clear everything up for you!
Current Development Scenario for Lavender
More buildbots than developers
Device sources do not have a proper commit history, and is little bloated
There are major battery issues with current sources
Elliptic Proximity Sensor doesn't work as it should
Unable to use full potential of sdm660, as it has full CAF support, yet currently we use everything from MIUI
People are taking the only few developers for granted, I have seen the community doesn't want to contribute at all by testing builds, and this is due to the increasing number of buildbots here
People working on private sources, these guys use stuff from all Open Source Developers yet keep their work private, I am strongly against such people, I started my work a month ago, and everything was public on GitHub
What happened here?
I started working on a CAF rebase a month ago, and now finally I have fixed all bugs that occured, CAF rebase is basically cloning trees that CAF releases for sdm660 devices, and doing bringup for lavender, so these trees are built from scratch
Proper Commit history with proper authorship to all my fellow developers
Elliptic Proximity Sensor has thorougly been fixed, you won't face any issues, no need to reboot or anything
Battery issues might have been dealt with, don't expect extreme difference
Sources are public, my fellow lavender developers can freely fork a copy of my trees and carry on development, I do not want any kind of fame or attention by keeping stuff private.
Users can feel the snappy performance as I didn't add a lot of stuff from MIUI, just selective, most of it is still from CAF.
So here you go, feel free to make your own changes, all I want is lavender to stand back up because right now, its really going down due to some retards here in the community. Users need to contribute more, not financially but help developers with testing and some support rather than supporting people who encourage use of private sources.
Device Tree: https://github.com/AmulyaX/android_device_xiaomi_lavender (-b lineage-16.0)
Vendor: https://github.com/AmulyaX/proprietary_vendor_xiaomi_lavender (-b lineage-16.0)
Credits:
For bringup references: Bladeyy and GuaiYiHu
For helping me throughout and maintaining commit history: @xdatman
For testing (few godly users who were sensible and smart enough to help with testing): @JSPiRiT , @Lone Soul , @Electro CZE and @christopaul97
Will you apply for official?
LineageOS 16
Changelog
-Initial Release
-Elliptic Proximity Sensor has been thoroughly fixed
-Rebased device tree on CAF
-Major performance, battery and stability improvements
1. Flash GApps along with ROM
2. CLEAN FLASH ONLY.
3. Build with Stock kernel, I recommend using Genom
4. No restrictions on Firmware you want to use
5. No need to flash vbmeta or Magisk (to boot), flash Magisk only if you want root
TAP HERE TO DOWNLOAD
Amazingly awesome news! I will try this as soon as I can, welcome back amulayax, I missed you from rn5p good times!
Sent from my Note 5 / 5 Plus using XDA Labs
Nice job man!
Just wondering if I shall update ROS with these new trees, since it's CAF-based. What do you think?
Giovix92 said:
Nice job man!
Just wondering if I shall update ROS with these new trees, since it's CAF-based. What do you think?
Click to expand...
Click to collapse
Yes sure! You'll have to make changes to make it compatible for your CAF ROS sources, as these trees have just been used to build LOS which is AOSP.
So feel free to use them according to your needs!
Thank you so much for your hard and amazing work.
We're lucky to have such a developer like you for Lavender.
AmulyaX said:
Yes sure! You'll have to make changes to make it compatible for your CAF ROS sources, as these trees have just been used to build LOS which is AOSP.
So feel free to use them according to your needs!
Click to expand...
Click to collapse
Well, gonna make a new update then.
Many thanks dude! Appreciated
Sir first of all congratulations and a big thank you....
I have a question nativ vc works?
AmulyaX said:
LineageOS 16
Changelog
-Initial Release
-Elliptic Proximity Sensor has been thoroughly fixed
-Rebased device tree on CAF
-Major performance, battery and stability improvements
1. Flash GApps along with ROM
2. CLEAN FLASH ONLY.
3. Build with Stock kernel, I recommend using Genom
4. No restrictions on Firmware you want to use
5. No need to flash vbmeta or Magisk (to boot), flash Magisk only if you want root
TAP HERE TO DOWNLOAD
Click to expand...
Click to collapse
nice to see u active developing again. I suppose u give it deference than official. more adding mod features. great job men, u already gave other stable rom before.. I believe u will gv more stable rom then other
You did Great work for lavender custom ROM users! Thank you for everything for your work.
I am downloading. We have any customization in this?
Nice even readme is details too
Thank you very much for your work. Will [ROM][9.0]AOSiP [Pizza] continue to be updated? If AOSIP rom is not updated, I will consider replacing LineageOS 16 rom.
Puru82 said:
I am downloading. We have any customization in this?
Click to expand...
Click to collapse
basic customization since it's LOS :/
messay said:
Thank you very much for your work. Will [ROM][9.0]AOSiP [Pizza] continue to be updated? If AOSIP rom is not updated, I will consider replacing LineageOS 16 rom.
Click to expand...
Click to collapse
Not anytime soon, consider using this for some time.
Hey, will you apply for being an official maintainer?
Thankyou for this rom it is superb.The smoothest pie rom I have used and great is caf based.Was on miui 9.9.3 but after seeing this installed it straight away.I booted with aLn void and is superb but yes genom is great too and cannot be faulted.Amazing work never thought would see another caf rom.Just brilliant.:good: