HI Everyone.
My Xperia X8 is bricked as i have tried to install custom roms in my phone. Now it is stucked at the Sony Ericsson Logo screen and is not going any further.
I have tried to flash the phone using Flash Tool but it failed. After connecting it in flash mode, Flash Tool says to check the USB Debugging mode from within phone which is not possible as it is not working.
I have also tried Sony PC Companion to repair my phone but at the time of update it says that no new update is available for my phone.
I have also tried using Sony Update Service but it also failed.
What should i do now?
Since retyping is troublesome ...
Have a look at this post I wrote up in this thread
Edit: Follow the instructions carefully. As you can read in the thread the restore worked (and I resurrected mine from the same point where yours is stuck).
The "Flash Tool says to check the USB Debugging mode from within phone" can't come up if the phone is connected in "Download mode" (keeping the back button pressed while connecting the USB cable to the computer). The crucial part is that the phone is TURNED OFF at the step where you press the back button, and that you KEEP the button pressed until Flashtool starts to flash.
And install gordon gate's usb drivers
Hit thanks button.
Sent from my E15 using Tapatalk
So today i wanted to unlock the bootloader for my Xperia Z C6003. From the instructions they stated that i have to shut down the phone and connect it to usb while holding the vol+ button. When i did that, the phone remained black and the computer is not able to detect my phone anymore. I tried different hardware button combinations but the phone could not power on. The computer detects it as QHUSB DLOAD driver but is unsuccessful in installing it. So i downloaded Gordon's Gate flash and it is recognized as Zeus Flash Device, but S1 tools is unable to flash this phone as it is not supported as it is a prototype (IMEI 0044). So now i am stuck with a bricked phone, anyone able to help me unbrick it? ): Help is much appreciated!
Hi all,
After long hours of troubleshooting and failures ..... I am here to ask for help.
I was trying to restore my Phone's Stock ROM (from CM 12.1) and I guess I chose the wrong version of the ROM (5303) and now, my Xperia is gone in deeeeeep sleep :crying:, and its now hard bricked.
I've tried lots of things like eMMC, S1Tool (Emergency mode)... but it seems that I'm unable to revive my phone back to life. S1 Tool in Emergency Mode seems to be working some times but as the files "SIN_FILE_SET" is for 5303 instead so it is not working and gives me error
Code:
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
[COLOR="Red"]PHONE NOT SUPPORTED IN THIS MODE[/COLOR]
Elapsed:34 secs.
Can anyone help me here
doomedXperia said:
Hi all,
After long hours of troubleshooting and failures ..... I am here to ask for help.
I was trying to restore my Phone's Stock ROM (from CM 12.1) and I guess I chose the wrong version of the ROM (5303) and now, my Xperia is gone in deeeeeep sleep :crying:, and its now hard bricked.
I've tried lots of things like eMMC, S1Tool (Emergency mode)... but it seems that I'm unable to revive my phone back to life. S1 Tool in Emergency Mode seems to be working some times but as the files "SIN_FILE_SET" is for 5303 instead so it is not working and gives me error
Code:
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
[COLOR="Red"]PHONE NOT SUPPORTED IN THIS MODE[/COLOR]
Elapsed:34 secs.
Can anyone help me here
Click to expand...
Click to collapse
As far as I might remember, flashing another model's ftf shouldn't really damage the phone, but I am not sure about that. Since you said that you did so and hard bricked your device, then i guess the answer is now otherwise.
Anyway, i have this one neat tip stored in my head thanks to one of our old member which i apparently forgot who Hold volume button down, connect to pc and press the yellow hard reboot button located at the back of the xperia SP until it reboots (not until it vibrates). This method however is untested by me because well, i haven't hard bricked my XSP. This should allow your XSP to boot into flashmode, if it can still properly boot. If it worked, then proceed flashing proper FTF. Note, this will indeed require many retries. Try until you're fed up, then confirm that this method didn't work for you.
Thanks for your help. That indeed did not worked :crying:
Now the phone when connected to PC is only recognised as "Qualcomm HS-USB QDLoader 9800"
I've tried to fix it using QPST, MIFlash using MPRG8960.hex and 8960_msimage.mbn, but I'm unable to find the right patch0.xml and rawprogram0.xml I guess
Can anybody help please
doomedXperia said:
Can anybody help please
Click to expand...
Click to collapse
i have hardbricked my xsp C5302 too before 6months havent find any solution till now ,but if setool supports c5302 it can be fixed but they are not having loaders for c5302 (and they asked me to forget about setool supporting c5302 and it cant be fixed for ever), so impossible *for now*
if you find any other solution post it here
@doomedXperia
same story with my c5302, s1 tool doesn't support.
but there is this setool, s1 tool is based on this tool. maybe it'll work :/
http://support.setool.net/showthread.php?3-UPDATES-AND-NEWS/page666
edit : SEtool also doesn't support c5302. :/
hi all ,
I wanted to load a custom rom for my xperia x8 e15i,evereything went ok,but when its reboot for the first time,its stuck to sonyericson screen and it never boot?
what should I do now to recover my phone? when I try to connect to pc it recognizes but pc companion shows me the way to confirm from the phone to conect
bricked
Hi Guys, I'm having a difficult problem.My XZ got soft bricked after flashing a ROM (I hold the power button and it vibrates but nothing shows on the screen, but still my computer can detect the phone when I plug it into flashmode or fast boot mode). And I tried to flash a stock rom using Flash tool but it gives me an error
FAILED <remote: command not allowed>.
Also my bootloader can't be unlocked officially So I don't know what to do next. Thanks In Advance.
If you mean Xperia Z then use Xperia Companion to repair, if you mean Xperia XZ then i have no experience sorry.