I connected phone LLD-L31 C432 with pc (usb)
I am not able to transfer without hisuite ( cant copy past direct from my computer)
and transfer speed also too slow help me . 750MB taking more then 30 minute ..
if you can transfer files with hisuite - i think driver is installed.
if you connect over usb-wire pc and phone - you look on phone question "files transfer / charge only"
what your pc (os and version)
simple change the usb-wire to another usb-wire! / is this original usb-wire? / many low-price work without full-speed!
Related
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
i've made the same wrong thing like you ... 5 days to find it out.
1. dont have a rom on your storagecard (well not in the root)
2. put the hardspl.exe on the desktop of your pc (also dont have a rom on the desktop)
3. start the hardspl.exe on the desktop with the usb pluged in.
and it will work and you will feel like me "like a dump noob".
SO YES - YOU HAVE TO START THE X1_HARDSPL.EXE FROM YOUR BLOODY PC, LAPTOP, ETC AND NOT FROM YOUR X1
Bennieficial said:
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
Click to expand...
Click to collapse
I had the exact same problem.
You need to:
Disable your internet connection(wifi/lan)
disable your virus detection and windows firewall (and any standalone fire wall you have)
Remove you MicroSD card
run hardspl (it should now complete the operation)
And flash to what ever rom you like (using the SD card method)
Re-enable your firewall/virus detection/internet connection (In that order)
thanks!! i got it working just fine now thanks to both of you guy's help!
ok one more problem. I am not able to get my X1 synced with WMDC anymore, just as it was doing before my failed attempts at Hard-SPLing my phone. How do I fix this?
ok do you have now the hardspl on the phone?
IF yes - it will sync.
1. dont connect the phone
2. delete the "Partnerschaft" in english perhaps the team in WMC (means delete the phone in MWC).
3. connect the phone it will say a "oh new phone" - give him the sync possibilities and it's done.
took a bit time the first time...................just checked it right.........hm got also problems.....yesterday it worked because he copied the changes ........but today!
New phone, it's not an I9000, it's a Samsung Galaxy 3 (I5800), if this is the wrong forum, my apologies.
First days everything went fine, even with Kies in 2 PCs.
Things start going really wrong this morning when I connected the phone to the laptop, mass storage option selected, dragged notifier, unmount sdcard option was available.
Checked the laptop and I had no sdcard drive in explorer.
Updated Kies, tried the usb drivers available in this forum, nothing worked.
Backup of sdcard through an sdcard reader, format sdcard, and the end result is the same. Meanwhile during the morning, the notifier disappeared, I had no option to unmount the sdcard anymore. When I connect the usb cable to the pc, pc says "Hi", phone says "Bye" (both do a sound) and nothing happens.
Resuming, phone is rooted, XP on the laptop, Win7 on the PC, updated Kies, updated drivers, tried USB Debugging, keep-alive option, all usb options available beside mass-storage, changed back to TWLauncher, same result: Nothing.
When connecting the phone to a different usb port, windows installs 2 modem drivers and a Samsung USB Composite Device.
Part of the logfiles say:
E/MTPRx ( 9735): In MtpReceiverandroid.intent.action.ACTION_POWER_CONNECTED
E/MTPRX ( 9735): Battery charging. plugType = 1
E/MTPRx ( 9735): Not of USB charging. Dont lauch MTP APP
E/Setting ( 9810): Intent Action android.intent.action.ACTION_POWER_CONNECTED
E/Setting ( 9810): Battery charging. plugType = 1
E/Setting ( 9810): AC charge
I'm sending the log in attach in case someone wants to have a look.
And now the questions:
- I still have 2 more days to replace the phone for a new one, do you think this is an hardware problem? Usb Cable?
- I will not be able to upgrade the firmware without a working usb connection correct ? Or is it possible to put the firmware file on the sdcard and upgrade it from there?
Thanks for the help.
Update:
- It's not the cable, I just tried to connect it with another cable I had around here (from my old Nokia xpress)
This is stupid... solved it with a hard reset/factory defaults + sdcard format :-/
On russian forum's 4pda Mirial flashed his Dexp w5 with help qfil on android.
Don't working 2g/3g service.
Dexp firmware with windows and android firmware
instruction for installation android on windows phone:
1 a)You should download android firmware and unzip on c:\firmware.
b) installing QPST_2.7.422.
c) should mode cabel and normal usb cabels.
d) installed qcom drivers without driver signing
shift and reset and f7
2 Run C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe
Select Programmer Browse choose prog_emmc_firehose_8x10.mbn and Load XML choose rawprogram_unsparse and open patch0 .
3 Removed micro sd and sim card. and connection phone to pc with mode cabel micro usb, after connecton to pc with normal usb cabel. You should see new device QDloader 9008 in device Manager.
4 In qfil press download.
5. finish and on phone.
6. Restore your imei with WriteDualIMEI(W+G_eMMC), but it don't working normal(
I can flashed this phone on Windows or android forever alone now?
All other functions of the phone works fine, besides modem.
Anyway to do this on Lumia devices like Lumia 625?
Rivo17 said:
Anyway to do this on Lumia devices like Lumia 625?
Click to expand...
Click to collapse
unsophisticated
I would like a Custom Rom for Lumia Nokia and Microssoft Lumia
and respect to this is a great work.....
power on modem(2g) on dexp w5 on android:
1. restored imei with WriteDualIMEI(W+G_eMMC)
2. Restored modem with qfil on picture.
3 power off phone and closed windows, and remove usb cabel and reboot phone and restored your imei with WriteDualIMEI(W+G_eMMC)
Hi guys I reaaly need your help!!
1. so basically what happened is my screen is dead but phone is not! i managed to connect the phone to my work pc via usb cable and copied all the data i needed.
2. then somehow the pc hard drive died and i installed a new SSD one but unfortunately i accidentaly deleted a cruical partition on the faulty hdd so all the copied S6 contecnt is now gone.
3. dont ask me how but now, on my new freshly installed OS on my new ssd, i connect the phone again and try to access its folder but nothing is there!
** could i have somehow deleted a samsung partition as well through the windows 10 installation process? (seems unlikely i think).
** could the phone be displaying a question about how i would like to use the usb cable (charging only or data transfer)? if so why would this suddenly happen?
** I tried connecting to another pc but same issuer persists. the driver installs but cannot see files.
** could it possibly work on my home pc because it was previously connected there?
** the icon on the pc is that of a media transfer like an mp3 player. when i access it there are no files but when i right click i dont have an option to add folders so i'm guessing this maybe a permissions issue?
how can I access the files on the phone?! THANKS!!!
just to update i got it all sorted out trying to press randomly on the phone apparently i managed to access the files so what i can understand is that the phone keeps a list of all the pc's its ever been connected to and a setting of which connection type to allow this pc.
As soon as i formatted the pc, the phone recognized it as new and probably asked my if i want charging or data transfer. somehow i managed to chose data transfer!
Thanks a lot anyways and have a great day
I have Redmi S9 with broken screen. Is it possible to transfer my files to PC? That phone also has PIN lock screen.
If the USB debugging on your phone is opened, and your phone can be detected by the computer via USB cable, you can transfer files to PC easily. Usually, you can do that via Copy & Paste. Or you can also ask for help from Xiaomi data manager tool like Coolmuster Android Backup Manager, etc. Its free backup function can help you do that easily. It also support WiFi connect. You need to make sure your phone and the computer are in the same network. Hope this will be your help.