Database Develop

[KERNEL]-[AOSP]-[LP-KK-JB] f4ktion 2.3.1 [3G|LTE|DUOS] - [OC/UC/UV/OTG]

Hi!
Welcome to f4ktion kernel, this is a kernel based on the arco68's/cm's one and it works on Android AOSP KitKat ROMs​
Features
Linux Kernel 3.4.104
CPU Overclock (OC): 1836MHz / 1890MHz / 1944MHz / 1998MHz / 2052MHz frequency scaling steps
CPU Underclock (UC): 378MHz / 270MHz / 162MHz frequency scaling steps
CPU Voltage Control (VC) Use PerformanceControl
GPU Overclock (GPU-OC): 504MHz / 545MHz / 600MHz frequency scaling steps
GPU Underclock (GPU-UC): 487.5MHz / 320MHz / 192MHz frequency scaling steps
Compiled with Linaro 4.9.2: Cortex A15 optimized toolchain by Christopher86
Optimizations: Built with -O3 and many optimization flags
Kernel mode NEON: Support for NEON instructions in kernel mode
Arch_Power: arch-specific power sched features enabled
Graphite optimizations: Graphite is a framework for high-level memory optimizations using the polyhedral model.
LTO: Link Time Optimization.
Intelliplug: Faux123's Intelliplug (it hotplug/unplug cpu cores based on load demand of the system)
Msm Hotplug: MyFluxi's msm_hotplug
UKSM: Ultra Kernel Same-page Merging enabled
BLN: Support for BackLightNotification (Use BLN's app to configure)
Sound Control: Faux123's GPL Sound Control 3.5 (Use FauxSound app to configure)
Gamma Control: Use Device Control app for color calibration
USB Fastcharge: Faux123's fast_charger driver, allowing to set mV of the charger or USB port your device is plugged-in to
AIO Optimizations: enabled kernel AIO optimization from Linux 3.8+
F2FS Enabled: Support for F2FS (Flash-Friendly File System)
Asynchronous Fsync: Asynchronous file sync
Dynamic Fsync: Faux123's Dynamic File Sync v1.3
Dynamic Management of Dirty Page Writebacks
USB OTG support: USB On-The-Go support, you need a Y USB OTG cable
Additional Governors:
Intellidemand
Intelliactive
Intellimm
Impulse
Lionheart
OndemandPlus
SmartASSV2
SmartASSH3
SmartMAX
Wheatly
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
Notice
- Flash it your on own risk, I don't take the responsibility for anything
- Use "f4ktion_x.x.x-eur_3g/lte-JB" only on CM-10.2​
- For kernel configurations check second post​
Download:
CM12.1
GT-I9190
f4ktion_lp_2.3.1-eur_3g
GT-I9192
f4ktion_lp_2.3.1-eur_3gds
GT-I9195
f4ktion_lp_2.3.1-eur_lte
CM12
GT-I9190
f4ktion_lp_2.2.0-eur_3g
GT-I9192
f4ktion_lp_2.2.0-eur_3gds
GT-I9195
f4ktion_lp_2.2.0-eur_lte
CM11 (EOL)
GT-I9190
f4ktion_kk_2.1.0-eur_3g
GT-I9192
f4ktion_kk_2.1.0-eur_3gds
GT-I9195
f4ktion_kk_2.1.0-eur_lte​
CM10.2 (EOL)
GT-I9190
f4ktion_1.5.0-eur_3g-JB
GT-I9195
f4ktion_1.5.0-eur_lte-JB​
Old Kernels​
Changelog​
Installation instructions
- Copy f4ktion_1.X.X-eur_xx.zip to your SDCARD
- Reboot into CWM recovery
- Choose "Install zip from sdcard"
- Select f4ktion_1.X.X-eur_xx.zip kernel and confirm installation.​
Source
f4ktion kernel​
Credits: (Alphabetical order)
arco68 (Big thanks for supporting S4 Mini)
Christopher83
CM team
faux123
junkyde
ktoonsez
proxuser
Stratosk

F4ktion Kernel Configs​
About fastcharge:
For fastcharge voltage configuration use this through terminal or console or you can use FauxClock app.
Code:
To [B]enable[/B] it use:
echo 1 > /sys/kernel/fast_charge/force_fast_charge
For [B]USB 2.0 [/B]use [B]500mA[/B] as [B]MAX[/B]
echo 500 > /sys/kernel/fast_charge/fast_charge_level
For [B]USB 3.0[/B] use [B]700mA[/B] or [B]900mA[/B] as [B]MAX[/B]
echo 900 > /sys/kernel/fast_charge/fast_charge_level
For [B]wallcharger[/B] use from [B]900mA[/B], [B]1100mA[/B], [B]1300mA[/B] to [B]1500mA[/B] as top
Warning: incorrect use of voltage could damage your phone or USB ports​
About hardlimit:
Hardlimit will limit max frequency to stock, use latest PerformanceControl app, compiled by @h0rn3t with support for Hardlimit feature, just use sliders to set your desired OC and hardlimit frequency​
For mm Dynamic management of dirty page writebacks or Dynamic Fsync use PerformanceControl too.​

Changelog
Code:
[B][COLOR="Red"][URL="https://raw.githubusercontent.com/F4k/f4ktion_kernel/220e645a1b72c83d8861a2636dfe27a814ac18b4/Changelog_10_05_2014.log"]Full Changelog 1.6.3[/URL]
[/COLOR][/B]
[B][COLOR="Red"]1.6.3[/COLOR][/B] (01/10/2014)
- Updated Linaro toolchain to [B]4.9.2-2014.09[/B]
- Upstream Linux Kernel to 3.4.104
- Updated ramdisks
- Synced with CM source
1.6.0 (13/08/2014)
- Added S4 Mini Duos variant (eur_3gds)
- Synced with CM source
- Updated ramdisks
- Upstream Linux Kernel to 3.4.103
- Intellidemand: updated to version 5.5
- Intelli_plug: upstream update to 3.8
- SoundControl: upstream update to 3.5
- mach-msm: set BUS to 4800
- Remove TIMA trash, we don't use KNOX.
- gpu: compile driver using -Ofast opt
1.5.6 (22/07/2014)
- fs/super.c: sync ro remount after blocking writers.
- Updated Linaro toolchain to 2014.07
- f2fs: upstream update.
- Merged with ML2 kernel source (part 2) (huge code update)
- Upstream Linux Kernel to 3.4.99
- Synced with CM source.
- Intelli_plug: upstream update.
1.5.0 (20/06/2014)
- Some other improvements, check Github or full changelog.
- cpufreq: smartmax: test some tweaks.
- mm: Added filesystem dynamic read-ahead
- char: Added Fast Random generator support (frandom)
- CK3 tweaks
- Added MyFluxi's msm_hotplug
- Updated Linaro toolchain to 2014.06
- Added Intellidemand CPU Governor.
- Added OndemandPlus CPU governor.
- Added Intelliplug
- xz: Optimize Sfck Compression
- f2fs: fix wrong statistics of inline data If we remove a file that has inline data after mount, our statistics turns to inaccurate.
- Compressed: optimize for Cortex A15
- block: row: add magic values.
- Upstream Linux Kernel to 3.4.94
- USB: gadget: mtp: Fix hang in ioctl(MTP_RECEIVE_FILE) for WritePartialObjet
- USB: gadget: rndis: Optimize tx path for better performance
- SELinux: Reduce overhead of mls_level_isvalid() function call
- Added AIO optimizations from Linux kernel 3.8+
- Synced with CM source
1.4.5 (08/06/2014)
- Some other minor changes, improvements.
- Updated ramdisks with some tweaks.
- Added support for moving app2sd
- Fixed FolderMount issue
- LTO enabled
- Graphite Optimization
- msm: slimbus: initial overclocking of slimbus
- bam_dmux: Use power efficient workqueues for delayed timeouts
- ext4: speed up truncate/unlink by not using bforget() unless needed
- msm: gpu: add optimizations cflags plus -O3 to drivers.
- F2FS support, kernel will auto-detect on boot your file system (f2fs or ext4)
- Set SELinux to permisive via cmdline.
- drivers: cpuidle: sync
- Synced with CM source
- Upstream Linux Kernel to 3.4.91
- Fix some warnings when compiling with gcc 4.8.x/4.9.x
- Makefile: add support for gcc 4.9.x
- kernel: Fix all leaks and cleanup
- Added Francisco Franco's Intereactive GPU governor.
- Pipe flag enabled
1.4.0 (08/05/2014)
- Build using Christopher Linaro Toolchain 4.9.1 (Cortex A15)
- msm: kgsl: added GPU Overclock/Underclock (OC up to 627MHz)
- writeback: fix race that cause writeback hung.
- cfg80211: fix memory leak
- Added support to FolderMount
- cpufreq: intelliactive: synced with latest changes.
- Upstream Linux Kernel to 3.4.89
- Updated ramdisks
- Synced with CM source.
1.3.6 (13/03/2014)
- Some minor fixes/improvements, check my git source code.
- Updated ramdisks
- Upstream Linux Kernel to 3.4.83
- Block: sio-iosched: some tweaks.
- Squash a lot of slab, slob and slub commits from Faux123
- Synced with CM source
- Use power efficient workqueues
- Power: add an API to log wakeup reasons.
- Added SIOPLUS I/O scheduler.
- Added SmartMAX CPU governor
- msm_otg: remove initialization wake_lock.
- block: fiops: code update/fix.
- Added Fiops I/O scheduler.
- futex: some code update, optimizations.
- Merge with ML2 kernel source (part 1)
- sound control: updated FauxSound to version 3.2
- Added Intelliactive CPU governor.
1.3.2 (28/02/2014)
- Some minor fixes/improvements
- Updated ramdisks
- Upstream Linux Kernel to 3.4.82
- Synced with CM source (a lot of patches)
- bam_demux: some code optimizations
- msm_otg: testing some tweaks to reduce possibility of wakelock.
- Make SAV2 and SAH3 moar aggressive
1.3.0 (03/02/2014)
- Updated ramdisks
- Compiled with -O3 optimizations again.
- Updated ramdisk of JB variants to latest official stable CM build.
- cpufreq: some optimizations and fixes.
- Upstream Linux Kernel to 3.4.78
- BLN: removed white spaces in code.
- sched: enabled ARCH POWER.
- Enabled kernel NEON mode.
- Added support on ramdisk to auto-mount drives as USBDISK
- Added USB OTG support, you'll need USB OTG Y cable, devices has to be externally powered. (thanks to sekil)
- Synced with CM source.
1.2.8 (18/01/2014)
- Updated ramdisk
- random: backport updates from Linux Kernel 3.13-rc4
- Using fluXXi optimized Linaro toolchain 4.8.2
- Upstream Linux Kernel to 3.4.77
- Synced with CM source
- cpufreq: added hardlimit, using 1.728 GHz by default. Thanks to yank555.lu
- cpufreq: updated SAV2 and SAH3 to fit low clock steps
- mach-msm: updated OC and UC code for better performance.
1.2.5 (09/01/2014)
- Synced with CM source
- Updated ramdisk of JB variants
- Random entropy tweaks
- Regenerated SAV2 and SAH3
- Update fastcharge code, using Faux123's one
- Added ARM LoUIS cache API
- Core scheduler optimizations
- Added Dynamic Fsync
- Added extra low CPU clocks for better battery performance (hopefully)
- Added Dynamic management of dirty page writebacks
- Added Asynchronous Fsync
- Removed some compiling warnings
1.2.2 (29/12/2013)
- Some tweaks to SmartASSV2 and SmartASSH3 governors
- Updated ramdisks
- Added Underclock (UC) support
- Limit max frequency to stock on boot (1.728 GHz)
- USB fastcharge support
- Synced with CM source
- Updated FauxSound to version 3.1 (volume changes applies now on real time)
1.2.0 (23/12/2013)
- Synced with CM source
- Added Overclock (OC) support up to 2GHz
- Added Voltage Control (VC) support
- Optimized KSM
- Upstream kernel to Linux 3.4.75
- Added Wheatley CPU governor
- Disabled BLN wakelock
- Add Zen I/O Scheduler
- Added SmartASSH3 CPU governor
- Deleted Lulzactive CPU governor
- Fixed SmartASSV2 stucking in max freq.
1.1.6 (19/12/2013)
- Added V(R) I/O Scheduler
- Upstream kernel to Linux 3.4.55
- Synced with CM source
- Readahead value changed to 512kB
- Compiled with O3 optimizations
1.1.5 (15/12/2013)
- Upstream kernel to Linux 3.4.50
- Synced with CM source
- Added JB/CM10.2 variants (Tested on latest 2013-12-02 20:19:59 official release)
- Added FauxSound (It's needs FauxSound Control app, unfortunately it's a paid app, but developers deserve it because they do a great job)
1.1.3 (13/12/2013)
- Added Simple I/O Scheduler
- Upstream kernel to Linux 3.4.40
- Updated ramdisk with latest cm changes
1.1.2 (12/12/2013)
- Added Lionheart CPU governor
- Added Lulzactive CPU governor
- Added SmartASSV2 CPU governor
- Synced with cm source
1.1.0 (11/12/2013)
- Added BLN (thanks to junkyde!)
- Upstream kernel to Linux 3.4.10
1.0.0 (07/12/2013)
- Initial release
- Setup build environment

F4k said:
Please, I didn't tested I9195 version, if someone can try to flash it and let me know if it works.
Click to expand...
Click to collapse
Flash now...i will back and report
Edit:
Flashed over the latest cm 11 and working really good
Thanks your amazing kernel! It full of futures that i missed till now!

radicspeter said:
Flash now...i will back and report
Edit:
Flashed over the latest cm 11 and working really good
Thanks your amazing kernel! It full of futures that i missed till now!
Click to expand...
Click to collapse
Thanks for testing!
I'll continue updating this kernel as far as I can.

F4k said:
Thanks for testing!
I'll continue updating this kernel as far as I can.
Click to expand...
Click to collapse
You are rock man!!
My previous phone I9000 (SGS) you are made the best rom+kernel F4k! I'm really happy to use again your kernel
I will happly flashing every kernel from you!

Good job man! I also have a I9000 here and also use your rom on it tested it on a I9195 works good so far

F4k said:
Hi!
Welcome to f4ktion kernel, this is a kernel based on the arco68's/cm's one and it works on Android AOSP KitKat ROMs
.
.
.
.
- Stratosk
Click to expand...
Click to collapse
Thanks for great work..... I will test it and donate you.

on 10.2 cm will work?Undervolting avalaible? P.S. Bootloop..10.2.0 serrano.

Hello
there is a version for CM 10.2?
thank you
---------- Post added at 11:02 AM ---------- Previous post was at 10:57 AM ----------
dwane3 said:
on 10.2 cm will work?Undervolting avalaible? P.S. Bootloop..10.2.0 serrano.
Click to expand...
Click to collapse
Hello
it does not work on CM 10.2, the phone is locked, you must reflash a kernel

Working great on Cm11
Envoyé de mon GT-I9195 en utilisant Tapatalk

On cm 10.2 bootloop,waiting for 10.2 version.

dwane3 said:
On cm 10.2 bootloop,waiting for 10.2 version.
Click to expand...
Click to collapse
this is only for 4.4 kitkat rom ..
Sent from my GT-I9190 using Tapatalk

Please, read OP, it's only for KitKat right now, let me see if I can make a JB variant.

Please make a Jelly Bean variant for 9190.Thanks.

Hi,
I'm not able to find any bug. Great work!
And what about OC version? It shoul be nice....

I'll be adding features as far I can, OC it's interesting, I think it's not needed right now with KK but i'll be adding OC soon.
Sent from S4 mini

F4k said:
I'll be adding features as far I can, OC it's interesting, I think it's not needed right now with KK but i'll be adding OC soon.
Sent from S4 mini
Click to expand...
Click to collapse
Can you add/consider 30 step media volume adjust? Thanks F4k

Tried this on S4 mini (LTE) with latest CM nightly. Worked flawless but I am getting bettery battery results with Vikinger-AOSP-4.4-GT-I9195-11.12.2013.zip kernel

jemeljsh said:
Tried this on S4 mini (LTE) with latest CM nightly. Worked flawless but I am getting bettery battery results with Vikinger-AOSP-4.4-GT-I9195-11.12.2013.zip kernel
Click to expand...
Click to collapse
Config your governor

[KERNEL][AOSP/CM][01/01/17] Quanta - V21

Simple, Powerful, Stable. Here's Quanta for the Nexus 4 (Mako)
Disclaimer: Your warranty is now void, use at your own risk. Don't blame me for anything because YOU decided to make these changes.
Note: This kernel is made for Android 5.1 (Lollipop) up to Android 7.1. (Nougat) For earlier versions, please refer to Sabermod franco.Kernel on post 3.
Features:
- Based upon the official franco.Kernel source
- Compiled with the latest Cortex-A15 optimized UberTC 5.x with some kernel based optimizations + Graphite
- Linux 3.4.110 (Linux 3.4.0 for V9 onwards)
- AOSP/CM compatible
- F2FS compatible
- DT2W support (From Stratosk)
- Faux Sound support
- Exponential brightness driver from Statosk
- Optimized Ondemand governor from Stratosk (V15+)
- USB-OTG Support
- MultiRom Support
- Tweaked performances profiles from franco.Kernel
- Support for android-keyboard-gadget (You can use your device as a keyboard/mouse for your PC)
- Support for Xpad​
Download:
AOSP: AOSP Download Folder
CM: CM Download Folder
Mirror​
Installation:
1. Install using CWM/TWRP
2. Enjoy​
Sources:
Kernel Source (quanta-7.x)
Anykernel Source (mako-7.x)​
​

Changelog:
Code:
V21 (01/01/17):
- Support for Nougat (7.x)
- Updated to December's security patches
V20 (18/09/16)
- Merged security updates for September (Includes CVE-2016-2059 and CVE-2016-5340)
- Attempt to fix camera on CM
V19 (21/08/16)
- Merged security updates for August
- Patched Quadrooter exploit (CVE-2016-5340)
- Updated F2FS
V18 (16/07/16)
- Merged security updates for July
- Performance improvements (From Franco's release for Flo)
- Faster boot up time (From Franco's release for Flo)
V17 (11/06/16):
- Merged Flo's security patches (Important)
- Updated F2FS
V16 (15/05/16):
- Fixed blank display while using the camera
- Mako_hotplug should work fine with Interactive now
- Made Software CRC toggable
V15 (08/05/16):
- Reverted CPU-Boost to use mako_hotplug instead
- Used the optimized Ondemand governor from Semaphore
- Interactive should be more power-efficient when the display is off
- Updated F2FS
- Misc security fixes
V14 (24/03/16):
- Disabled the 3rd and 4th CPU core by default
- Compensate the performance loss of this by adapting the frequencies in Interactive
- Changed the default frequency back to 1512Mhz.
V13 (09/03/16):
- Reverted a timer related commit that was the cause of the panics
- Reintroduced Nvidia's power settings
- Updated F2FS
V12 (21/02/16):
- Reverted Nvidia's relaxed power settings
- Misc improvements/fixes
V11(18/02/16)
- Rebased from Flo V7 release
- Changed from mako_hotplug to cpu_boost
- Replaced Conservative by Interactive
- Updated F2FS
- Misc improvements (KSM, optimized LMK from Motorola, etc...)
V10(09/12/15)
- Synced with the 6.0.1 Google sources
- Added full FauxSpeaker support
V9(09/11/15)
- Rebased from Google 3.4.0 sources
- Compiled with Cortex-A15 optimized UberTC
V8(25/10/15)
Initial Android 6.0 (Marshmallow) release
Linux 3.4.110
Removed Franco sound tweaks
Updated the F2FS drivers
Updated the android-keyboard-gadget
V7(24/09/15)
Linux 3.4.109
Reverted the LMK optimization patch from Motorola
GPU drivers reverted to a 5.1.1 state (Fixes Chrome scrolling lag)
Updated the F2FS drivers
Enabled support for XPad and updated it for Xbox One controller support
Battery power saving optimizations from Nvidia
Misc optimizations/fixes
V6(24/05/15)
Synced commits from 5.1.1
Reverted a cpufreq commit that was causing some more watchdog issues
V5(10/05/15)
Reverted the mako_hotplug commits from Shamu (as an attempt to fix watchdog issues)
Added filesystem related optimizations
Added some LMK optimizations
Added ROW optimized values
V4(03/05/15)
Fixed CM PowerHal issue for good
Added Stratosk's DT2W Power Key Suspend
V3(19/04/15)
Linux 3.4.107
Added some stuff to ramdisk + fixes
Merged some mako_hotplug commits from Shamu
V2(17/04/15):
Replaced McKael's DT2W implementation by Stratosk's
Added Fast Charge
Tweaked the performance profiles (Power Saving CPU freq going from 1242 MHZ to 1026MHZ)
V1(16/04/15):
Updated F2FS drivers (with new mounting flags so you can feel a whole new beast)
Tweaked performance profiles (I found that they weren't as much optimised as I would like to)
Support for android-keyboard-gadget (you can now use your device as a keyboard/mouse for your computer)
Reverted the 192 MHZ CPU freq as it was causing more negative than positive results
Thanks:
@franciscofranco @TheMrcool212 @jolinnard @McKael @xcstacy @faux123 @stratosk @osm0sis @Tk-Glitch​
​

Quanta Tweaks
All your tweaks are now regrouped into the app I've developped. No more hassle in tweaking 10 files/5 different apps togheter. It also has a franco.Kernel shortcut so your tweaking experience won't be stopped when trying to reach it.
https://play.google.com/store/apps/details?id=com.zaclimon.quantatweaks
It includes various tools and a beautiful user interface to enhance your experience even further!
Request for new features
Listen, I want to keep this kernel as minimalistic as possible. For this reason, I won't add any GPU OC, CPU OC, S2W,S2S, etc... DON'T EVEN BOTHER TO ASK!!
Thank you.
Sabermod franco.Kernel information (For 4.4 up to 5.0, Deprecated)
- Note: r211 to r213.2 are Kitkat (4.4) builds, r215 to r216.2 are Lollipop (5.0) builds.
- Compiled with SaberMod GCC 4.9.3 with Ofast optmisations + Graphite + other optimisations
- Linux 3.4.106
- AOSP/CM compatible
- F2FS compatible
- DT2W support (From Mckael)
- Faux sound support
- Linux mainline random driver (4.4 Builds)
- Exponential brightness driver from Statosk
- USB-OTG Support
- MultiRom Support
- 192 Mhz CPU step available
Download:
AOSP: AOSP Download Folder
CM: CM Download Folder
Installation:
1. Install using CWM/TWRP
2. Profit
Sources:
Kernel Source (sm-5.0 and sm-5.0-cm)
Anykernel Source (mako-5.0)
Changelog:
Code:
r216.2 (22/02/15)
- Restore deep sleep frequency to 384 MHZ (Should fix DT2W not responding)
r216 (18/02/15)
- Synced from Franco (Conservative as default, msm_hsic_host, etc...)
- Linux 3.4.106
- Updated F2FS drivers from up to Jan. 11th 2015
- Ramdisk Tweaks
- Compiled with updated SM 4.9.3 toolchain
r215.2 (31/12/14)
- Linux 3.4.105
- USB-OTG fixed
- Otgcontrol script is now in /system/etc/otgcontrol.sh
- Minor ramdisk tweaks
r215 (14/12/14)
- Completely rebased off Franco's sources (With Android 5.0.1 sources)
- Compiled with the latest 4.9.3 SM toolchain
r213.2 (19/10/14)
- Linux 3.4.104
- Updated Faux Sound to 3.6
- Added an init.d script to enable/disable USB-OTG. (named 91otgcontrols)
- Updated F2FS with patches up to 10/10/14 (f2fs.fsck shouldn't have any issues up to this point + there should be some performance improvements)
r213 (11/09/14)
- Upstream patches from Franco (Hotplug fixes, Interactive governor improvements)
r212 (01/09/14)
- Upstream updates from Franco (Hotplug driver enhancements, fixes from r211)
- Added the 192 MHZ Freq
- Updated fauxsound version to 3.5
- Misc TRIM improvements
r211 (25/08/14)
- Upstream updates from franco
- Linux 3.4.103

A new thread for good kernel.. Thanks will try today.

Good to see this new thread. I hope you have merged updates from the new test 212 which fixes idle battery drain for many.

Nice!
Sent from my Nexus 4 using Tapatalk

Just got real.

Tested on latest BETA3 of ParanoidAndroid and is working good.
Is there a possiblity to see mods concerning brightness? Minimum stock brightness is too high for me, but I love Franco kernel and I don't want to change to (for example) AK Kernel that support lower brightness levels.

Is this SaberMod Franco kernel better than stock Franco kernel? Sorry if its a noob q lol

BassBlaster said:
Is this SaberMod Franco kernel better than stock Franco kernel? Sorry if its a noob q lol
Click to expand...
Click to collapse
yes

marcof93 said:
Tested on latest BETA3 of ParanoidAndroid and is working good.
Is there a possiblity to see mods concerning brightness? Minimum stock brightness is too high for me, but I love Franco kernel and I don't want to change to (for example) AK Kernel that support lower brightness levels.
Click to expand...
Click to collapse
I ported the experimental brightness driver from stratosk which supports even lower minimum brightness. You can use the stratosk app to enable/disable it.

hey buddy nice that you has your own thread now i got a question this one is based on the official 211 or the new 211 test build franco posted i think yesterday ? ty for the builds an as always great job mate

zaclimon said:
I ported the experimental brightness driver from stratosk which supports even lower minimum brightness. You can use the stratosk app to enable/disable it.
Click to expand...
Click to collapse
Ok, I did it with Semaphore Manager, I think you should add this to the first post, it's a good feature thanks, you're great

Maibol said:
hey buddy nice that you has your own thread now i got a question this one is based on the official 211 or the new 211 test build franco posted i think yesterday ? ty for the builds an as always great job mate
Click to expand...
Click to collapse
It is based on the official r211 but I just saw that he made some changes which is, I suppose, the test version Franco released tomorrow.
I'll try to make an update today in order to reflect those change.

No UCI Support in Synapse :crying:

snacs said:
No UCI Support in Synapse :crying:
Click to expand...
Click to collapse
Flash ukm, flash kernel. Reboot. Install synapse. Should work
Sent from my Nexus 4 using Tapatalk 2

jmtjr278 said:
Flash ukm, flash kernel. Reboot. Install synapse. Should work
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for reply. I try a clean install later.

Could you please include 192mhz frequency?And also latest fix from franco if you wouldnt mind!=p

Thanks for this kernel, I flashed it and everything works fine
Just one question, which hotplug this kernel use ? On Synapse, MPdecision is unchecked and no other hotplug is showing.

jmtjr278 said:
Flash ukm, flash kernel. Reboot. Install synapse. Should work
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Didn't work for me. Clean install step by step

[CLOSED] [Kernel][OneUI/Treble][J530X]CronosKernel V5.0

Welcome to CronosKernel for Exynos7870 Devices
J730X | J530X | J710X | J701X | G610X | A600X | J600X
Version : V5.0
Release : 1/13/2020
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
Click to expand...
Click to collapse
​
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro 4.9.4
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]RMM-KnoxGuard Free
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]FsyncToggle
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 9.0 and Treble GSIs
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Encryption Support for StockRoms
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
The kernel supports HKTweaks to manage and control the kernel turntables. Download Here : Github
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock (Google RMM if you had issues)
Flash TWRP Recovery that can be found in J730 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
Kernel does not include Magisk. Download it here if you need it
--Basic Info --
The kernel has been fully refreshed and made from scratch to suite the everyday-changing Exynos7870 Android experience. with support for Treble Roms, OneUI Roms, Pie bootloaders and much more optimizations and improvements to improve both the user experience and developers who choose to use this kernel​
-- Credits --
@topjonhuw For Magisk
@geiti94 For patched SS libs
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post​

Changelog / Download
CronosKernel V5.0 1/13/2020
This version has been fully reworked and made from scratch, there are new/old features included. mostly its fixes to allow our kernel to work in Pie releases
WARNING : Please update your device to the latest available boot loader and modem. Devices that can be updated to Pie but running oreo bootlaoder is not going to have network.
Devices with too old bootloaders are not going to have keystore. UPDATE BEFORE YOUR REPORT A BUG
[x] Fully reworked and rebuilt from scratch
[x] based on J530FXWU5CSH7 pie source
[x] Supports J530X|J730X|J600X|A600X|J710X|J701X|G610X
[x] Compiled with linaro
[x] many compiler optimizations
[x] Disabled proca,defex,cp_secure,knox,tima,rkp,kap and other samsung security
[x] Fully permissive
[x] Disabled broken spectrum profiles
[x] AOSP specific fixes and optimizations
[x] proper sdfat driver support (for exFAT/fat32)
[x] full F2FS Support for DATA,CACHE
[x] All the previous ramdisk mods, loggers and tweaks
[x] reduced logging spam from AVC, HOTPLUG
[x] Fully disabled samsung Hotplug (Performance with no significant battery hit)
[x] Fixed an issue where 4 cores were stuck on offline
[x] CMDLINE patches for fake knox status
[x] CPU/DEVFREQ/MIF etc voltage control
[x] boeffla wakelock blocker
[x] custom default wakelock blocker list
[x] UKSM 0.1.2.3
[x] Powersuspend 1.8
[x] Dynamic Fsync
[x] Fsync/crc toggles
[x] unlocked tunables for stock governors
[x] toggle archpower and other sched improvments
[x] LZ4 Support
[x] improved block performance
[x] improved devfreq performance
[x] imrpvoed TCP performance
[x] improved memory performance
[x] Support for Pie bootloader devices
[x] wireguard support
[x] Improved CPU Overclocking
[x] GPU Control
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
OneUI -
Download : AndroidFileHost
Size : 64.5 MB
MD5: 2ce69de1525b83fe83f4512efb65dc22
Treble -
Download : AndroidFileHost
Size : 63.6 MB
MD5: 1f6df083b148adc90a5fa15606cf066f
Treble Versions are meant to be used with AOSP roms (on both official and unofficial treble devices) . they have certain patches and MTP fixes
Old releases
HeliosPie V3.1 Update​- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 38.3 MB
MD5: 46dec1efb1f9ac305e859f9a99ca88f1
HeliosPie V3.0 Update​- Updated to Android Pie
- OneUI and GSI Support
- Disabled KnoxGuard (New RMM)
- Updated to EliteTuner V1.1
- 2AMP Charging
- And all the previous features and changes of HeliosKernel
Download : AndroidFileHost
Size : 42 MB
MD5: fc3831f0debedd9fe614798e77e005a6
HeliosPro V2.7 Update​
- Updated Ramdisk
- Fixed some performance and battery issues
- Fixed WiFi and Bluetooth on Stock J5/J7 Roms
- Magisk 18.1
- Linaro 7.4 Toolchain
Download : AFH
MD5 : 8db06bf5daa879dc790f749ac315ed6a
Size : 45.7MB
Old releases and changelogs
HeliosPro V2.6 Update​
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- J5 Removed 70HZ mod so fake displays can work
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.0 Included
Follow the Full change log on the Github source.
Download : AFH
MD5 : 2b11e227741486bf41dceced6c96a66c
Size : 46.6MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J530F/G/Y/YM/FM/GM/S/L/K
J730F/FM/G/GM (And any J7 variant)
​Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Support for 3GB J5 2017 Variants
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
Download : AFH
MD5 : 8594de8b4f2e2292fa8b730093886ac1
Size : 47MB
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J530F/G/S/L/K
J730F/FM/G/GM (And any J7 variant)
​
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
P.S : J7 aod is basic until we get new Oreo drivers for J7
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- J5 2017 70Hz Refresh Rate
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Download : GoogleDrive
Source : Github​
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-J7 Pro Flicker Fix/AOD
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
J530F/G : GoogleDrive
J530Y/YM : GoogleDrive
J530FM/GM : GoogleDrive
Oxygen Kernel control : GoogleDrive
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Add Support for J530FM/YM/GM/G
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
J530F/J530G : GoogleDrive
J530Y/YM/GM/FM [2 FEB]: GoogleDrive
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
Added AOD Partial Support (Reverted in source due to dangerous screen flicker issue)
Download Link : --GoogleDrive--
----------------------------------------------------
-V1.0 Initial release
--DownloadLink--
--Mega--

F.A.Q​
Q : Does this support Prometheus V2 ?
A : No, this only supports NEW OneUI roms released in august 2019 and up
Q : I dont have lockscreen working
A : you have a very old bootloader, update it
Q : I dot have working simcard
A : You have a very old bootloader/modem update them both
Q : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use HKtweaks from here
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption. it has been disabled due to wasted performance
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock 9.0 and custom Roms made after August 2019​

congratulation brother....all the best luck
Sent from my SM-T715 using Tapatalk

Congrats big boy
Waiting nougat now

Good luck mate..
All the best...

Nice, wht the meaning denoxed?
It mean secure folder will work?

seblefb said:
Nice, wht the meaning denoxed?
It mean secure folder will work?
Click to expand...
Click to collapse
It means the exact opposite.
Secure folder doesn't work at the moment with root let alone a custom kernel.
The only option is to use private mod when a custom rom comes with it.

Thanks, its working like a charm

ananjaser1211 said:
Successfully booted S8 firmware with this kernel without issues​
Click to expand...
Click to collapse
i can use S8 firmware or S8 custom ROM?

akaluptos21 said:
i can use S8 firmware or S8 custom ROM?
Click to expand...
Click to collapse
If you are a developer yes. As booting it needs few edits. Not straight away

ananjaser1211 said:
If you are a developer yes. As booting it needs few edits. Not straight away
Click to expand...
Click to collapse
i am not
if u have time,can u make any rom?

akaluptos21 said:
i am not
if u have time,can u make any rom?
Click to expand...
Click to collapse
I will be posing roms for this phone just not yet. As I'm busy with my note 4 roms.

Sorry, is it comptble with exposed?

Thanks .. it's a great kernel as it solve wifi passwords problem ??
Hope a new update to get AlwaysOnDisplay

Hi bro .. i went ask you about this Kernel
1- what this ?
2- why i need flas this Kernel ?
3- what he give me ?
thanx

Abdullah_a86 said:
Hi bro .. i went ask you about this Kernel
1- what this ?
2- why i need flas this Kernel ?
3- what he give me ?
thanx
Click to expand...
Click to collapse
If you dont understand stuff from #1 then dont flash. as you wont benefit from it
Besho Gemo said:
Thanks .. it's a great kernel as it solve wifi passwords problem
Hope a new update to get AlwaysOnDisplay
Click to expand...
Click to collapse
You are welcome, AOD was the main reason i made this kernel, its still experimental but should come
seblefb said:
Sorry, is it comptble with exposed?
Click to expand...
Click to collapse
There should be no issues.

New update should arrive soon.
will have linux patched to 3.18.73 , some adb insecure improvements and minor AOD integration for my future rom for this device.

ananjaser1211 said:
New update should arrive soon.
will have linux patched to 3.18.73 , some adb insecure improvements and minor AOD integration for my future rom for this device.
Click to expand...
Click to collapse
Waiting the new update ?
is there any solve to open secure folder ?

Besho Gemo said:
Waiting the new update
is there any solve to open secure folder ?
Click to expand...
Click to collapse
im not sure it can be fixed on J5 17 , As samsung patched it after phones released after the S7

[KERNEL][TREBLE] HeliosPro Kernel v2.7 For J600X

Welcome to The HeliosPro Kernel Thread for Galaxy J600X
Built with Various Oreo 7870 Source.
Linaro GCC 7.4.1​
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]GSI with Oreo Vendor and Samsung Oreo Roms Both Supported
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Various Compiler Optimisations
[x]Compiled with Linaro 7.4.1
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Working MTP and Wifi Hotspot
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J701 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help
@JaskaranSM for Building it For J600X
@mohitmallick17 for his zip template
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source :http://github.com/jaskaranSM/Helios_7870
XDA:DevDB Information
HeliosPro Kernel Treble 2.7, Kernel for the Samsung Galaxy J
Contributors
JaskaranSM, JaskaranSM, Ananjaser1211
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: 2.7
Stable Release Date: 2019-06-12
Created 2019-06-12
Last Updated 2019-06-11

HeliosPro V2.7 Update​This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time and My potato PC , but i can support this kernel.
Changelog :-
- Compiled with Linaro 7.4.1 Compiler
- Performance and battery greatly improved with new compiler
- IO Schedular Driver Optimisations
- Added hKtweaks app for kernel tuning. (Thanks @corsicanu)
- More Speedier.
- Added NVS Hibernation Driver for better power management.
- Semi-OFast Optimsations for proper balance between performance and battery backup.
- Added Newer Boefolla Wakelock Blocker
- Added Newer Xpad (Joystick Controller) Drivers for Better Compatibilty.
- Added State Notifier Driver
- Fixed MTP on GSIs
- Fixed WLAN (WiFi) Hotspot on GSIs
- Added F2FS Filesystem Support.
- Memory driver using FIFO Queue and crypto optimisations
- Updated Wireguard VPN driver.
- Enabled IP tunneling for IPv6 Networks with TCP and UDP ports Support.
- Hotplugging with Real Time Scheduling
- Reduced Wakelocks for WLAN (WiFi) driver
- Added a lot of new TCP congestion Algorithms.
- Initial TCP window size is set to 64k for better caching
- More precise cpu frequency control
- Magisk Included
- New Cool AROMA theme
Follow the Full change log on the Github source.
Download : Google Drive
Size : 34MB

Tested and working thanks bro !

danicadanicadanica said:
Tested and working thanks bro !
Click to expand...
Click to collapse
...

danicadanicadanica said:
Tested and working thanks bro !
Click to expand...
Click to collapse
Can you tell me which rom and gapps do you use
And what bug is there so far
Ty

danicadanicadanica said:
Tested and working thanks bro !
Click to expand...
Click to collapse
hey.what is the rom that you're using?

[KERNEL][GSI/OneUI][06.09.2020][4.4.232] Kintsugi 1.1.6

Kintsugi
Kintsugi is the first custom kernel project I've worked on and I am proud to finally release it. Its name comes from the Japanese art of repairing broken pottery using powdered gold or silver, and I would say that it fitted the philosophy of my work. It wouldn't have come to life without my use of several developers' contributions. Finally, I aimed for a balance between performance and battery life in order to offer a stable user experience.
Features:
- Built with the latest Linaro prebuilt toolchain and compiled with -O2 and GCC Graphite optimizations
- Upstreamed to the latest linux-stable kernel version
- Updated the kernel source code to BTF6 from Samsung.
- Upstreamed CFQ I/O scheduler
- Disabled several Samsung security and debugging related configs
- All the CPU clusters' are undervolted (by -75mV) and have their minimum frequencies underclocked
(343Mhz for the little clusters and 520Mhz for the big clusters)
- Implented CPUfreq backports by celtare21 @KuranKaname)
- Increased the timer frequency to 300Hz for fewer jitters
- Enabled power-efficient workqueue mode by default for improved power consumption
- Disabled Kernel Samepage Merging by default for less CPU usage
- Implented different memory and filesystem related changes by @Sultanxda and @arter97
- Westwood is set as the default TCP Congestion algorithm
- Built-in SafetyNet patches by @Sultanxda are included (with @tbalden rootless approach)
- Built-in Boeffla Wakelock Blocker by @andip71 with pre-configured wakelock blocklist
@evdenis and @diepquynh)
- Built-in State Notifier driver by @neobuddy89
- exFAT and vFAT support
- Implented sdFAT mount options by cocafe
- Numerous other fixes, tweaks and under-the-hood optimizations
Installation:
The boot image can either be flashed via Odin or TWRP. I can add instructions if that would be necessary.
Download:
GSI
OneUI
Credits:
I thank the following persons for their respective contributions. If I forgot someone, their name is properly credited on GitHub.
@arter97
@cocafe
@evdenis
@farovitus
@Freak07
@ianmacd
@idkwhoiam322
@kdrag0n
@KuranKaname (celtare21)
@nathanchance
@neobuddy89
@nr7777
@osm0sis
@pascua28
@pkgnex
@Sultanxda
@tbalden
@tytydraco
@wrongway213
XDA:DevDB Information
Kintsugi, Kernel for the Samsung Galaxy A30
Contributors
BlackGunZ
Source Code: https://github.com/BlackGunZ/Kintsugi
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1.6
Stable Release Date: 2020-09-06
Created 2020-08-01
Last Updated 2020-09-06

Really nice!

nice job!

Support Treble?

hacker812c said:
Support Treble?
Click to expand...
Click to collapse
The first users from Telegram reported that the kernel worked on HavocOS. You could give it a try.

New update is up!
Changelog:
- Increased the timer frequency to 300Hz for fewer jitters

Kintsugi #1.0.2
Second update of the day! Thanks to the contributors on Github.
Changelog:
- staging: samsung: argos: remove hmp boost
- mm: page-writeback: Subtract min_free_kbytes from dirtyable memory
- PM / Wakeup: Use rcu callbacks for better performance
- Revert "CHROMIUM: cpufreq: interactive: calculate load before freq change"
- include: asm-generic: do not hard code HZ to 100
- sched: use custom LOAD_FREQ for each HZ
- mm: Increase vmstat interval
- fbdev: decon: Disable logging

Kintsugi #1.0.3
New update! Thanks to the contributors on Github.
Changelog:
- Disable dm-verity and avb
- MTP bug fix for GSI ROMs

Kintsugi #1.0.4
New update! Thanks to the contributors on Github.
Changelog:
- Upstreamed to the 4.4.210 kernel version
- arm64: dts: Remove the reserved block of memory for CONFIG_TIMA (the driver was already disabled, so it makes sense)
- exynos-dm: Wrap exynos-ss debugging parts
- defconfig: Disable exynos-dm debugging for exynos-ss
- workqueue: Add system wide power_efficient workqueues
- Changes and updates to some other kernel parts (lib: sort and int_sqrt; rcu)

for setting the kernel, what must i can use the app name?

ican2703 said:
for setting the kernel, what must i can use the app name?
Click to expand...
Click to collapse
Use the app you prefer!

Can you make the kernel support permissive too? I tried to make it permissive with hktweaks but it won't work it only work in enforcing mode

Jake4lvas said:
Can you make the kernel support permissive too? I tried to make it permissive with hktweaks but it won't work it only work in enforcing mode
Click to expand...
Click to collapse
No, I kept the kernel's SElinux mode in enforcing state by default for security reasons.

Kintsugi #1.0.5
New update! Thanks to the contributors on Github, and to my testers (ilina-tatyana, RiccoS and Moneer).
Changelog:
- Upstreamed to the latest linux-stable kernel version (4.4.232)
- Fixed fast charge support for GSI ROMs
- boeffla_wl_blocker: Add more wakelocks (14860000.decon_f, umts_ipc0 and umts_ipc1) to the blacklist (thanks to ilina-tatyana for the logs)
- arm64: dts: Properly disable the reserved block of memory for CONFIG_TIMA
- Reverted "workqueue: Add system wide power_efficient workqueues"
- Reverted the changes and updates to some other kernel parts (lib: sort and int_sqrt; rcu)
- kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
- Other under-the-hood changes (that are available on Github).

Kintsugi #1.1.0
New update! Thanks to the contributors on Github and to my testers on Telegram.
Speaking of Telegram, I had to factory reset my phone and I lost most of my data. Reach out to me on XDA.
Changelog:
- Updated the kernel source code to BTE3 from Samsung.
- ZSWAP uses now ZSTD as its compression algorithm (instead of LZ4).
- Enabled Mass Storage USB file transfer mode for GSI ROMs.

Can it necessary to install Disable dm-verity and avb.

Tayyab Sohail said:
Can it necessary to install Disable dm-verity and avb.
Click to expand...
Click to collapse
Hello,
No, you don't have to. You can install the custom kernel without it.

What about a version for the A40? They even have the same SoC

Can you add instructions for how can the .img be flashed with Odin?

ponces said:
What about a version for the A40? They even have the same SoC
Click to expand...
Click to collapse
Indeed. I want to do make that in the future!
spicy_fox said:
Can you add instructions for how can the .img be flashed with Odin?
Click to expand...
Click to collapse
Have you found them or do you still need those instructions?