Need a little help here with bootloader from my Redmi 4a - Xiaomi Redmi 4a Questions & Answers

I was using Ayra Hikari's recovery and I saw an option that said "delet boot loader encryption" I thought it was to remove the recovery password, but when I pressed and rebooted the phone did not light up in the charger. What do I do now ?

Related

[Q] HTC One stuck on charge icon after atempted root

Unlocked bootloader on my phone no problem so decided to go on to rooting. Followed the xda video step by step, but using twrp as recovery instead of clockwork. Flashed twrp using fastboot. Instead of hitting reboot bootloader, accidentally hit power down. Device is now stuck on charge screen, even unplugged. Charging LED unlit, cannot power down/reboot. Anything I can do, or have I bricked the device?
DrinkersEng said:
Unlocked bootloader on my phone no problem so decided to go on to rooting. Followed the xda video step by step, but using twrp as recovery instead of clockwork. Flashed twrp using fastboot. Instead of hitting reboot bootloader, accidentally hit power down. Device is now stuck on charge screen, even unplugged. Charging LED unlit, cannot power down/reboot. Anything I can do, or have I bricked the device?
Click to expand...
Click to collapse
you probably have flashed twrp 2.7.0.0 which have this issue with charging mode (phone plugged and powered off but the screen will never turn off)
Hold down power button + volume down until the phone reboots then flash twrp 2.6.3.3 or 2.6.3.4 and you'll be fine.

Infinite bootloop Huawei P10

Recently i'm just update the Huawei android version, but after restarted the phone, it's keep stuck on the manufacturer logo, unable boot into the main screen.
I did try to press Volume key + and Power unfortunately unable to enter the recovery mode, please help.
Send it to service
If you haven't unlocked the bootloader/installed TWRP/Rooted, then yes I'd agree with the above comment and send to service.
Otherwise follow the instructions here.... https://forum.xda-developers.com/p10/help/tutorial-recovering-p10-p10-brick-t3600211
amonev said:
Send it to service
Click to expand...
Click to collapse
I'd asked the service center but they said will wipe my data, is there anyway to retrieve the data back?
Just for understanding: Did you unlock your Bootloader?
Jannomag said:
Just for understanding: Did you unlock your Bootloader?
Click to expand...
Click to collapse
No, i didnt unlock bootloader.
Did someone managed to fix that? I have same problem.
I used hisuite to install pie update on my p10 and it started bootlooping.
Button combinations for fastboot, factory reset etc dont work, cant even shut down phone unless disconecting battery from the motherboard.
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
sayfsami said:
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
Click to expand...
Click to collapse
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
zgfg said:
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
Click to expand...
Click to collapse
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
sayfsami said:
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
Click to expand...
Click to collapse
eRecovery is different from Recovery (I wrote above the phone to be connected to charger while booting with Vol+ kept pressing; in Recovery there is no option for Installing the latest - but the option is present in eRecovery), but anyway, you probably cannot boot to eRecovery either ;(
It could be also possible to reinstall firmware from HiSuite but you could not connect if you cannot boot
For flashing from Fastboot, you must have Bootloader and FRP unlocked (but to unlock, you must first boot to the system)- if I understood correctly, you didn't play with Bootloader, Fastboot, flashing, etc yet, hence your FRP and BL are locked
Uhm can anyone help me? pls. I unlocked my bootloader and flashed open kirin AEX P1 Beta and it caused me bootloop maybe because I fail to factory reset the second time or at least can I reflash the custom rom to make it work again but I can't access my p10 on fastboot

Xiaomi Mi A2; Cannot access recovery and bootloader

As the title says, I cannot access bootloader and recovery mode. This happened after my device was accidentally removed while flashing stock rom :crying:
Is my device hardbricked now? My device is stucked on mi logo when holding the power button. Holding power button + volume down however gives me a black screen (the screen is turned on though). Please help. I was looking for a solution for hours already but I only found solutions that would require you to either boot into recovery or access bootloader.
hugeee said:
.... Holding power button + volume down however gives me a black screen (the screen is turned on though)...
Click to expand...
Click to collapse
I'd suggest to connect phone when it is in supposed "fastboot mode" (though with black screen) to PC and type "fastboot devices" in platform-tools folder CMD. If phone is recognized, you'll be able (as obviously you have unlocked phone) to flash stock ROM or boot into TWRP to flash custom ROM, - black screen can happen with corrupt /splash partition, while bootloader may be still working.

Magisk resulted in boot loop

Hi, I have a Samsung Galaxy S10 SM-G973F. I unlocked the bootloader from the Download mode, then turned on the OEM unlock from the developer settings. I installed Magisk from github, created the patched firmware, then flashed all the files via Odin.
Now the S10 displays a warning that the bootloader has been unlocked, followed by the warning it's not running original samsung firmware, and an option to click the power button to continue.
The problem is, it does not boot into the OS. No matter which buttons I press, it does not boot. It stays on this screen for a while and reboots. I cannot initiate download or recovery mode. I cannot turn off the device. It's in a boot loop.
I used this firmware (I checked it's the correct one): https://samfw.com/firmware/SM-G973F/BGL/G973FXXSBFUF3
And followed this tutorial: https://yewtu.be/watch?v=V_IeG06skk4
I am not using TWRP. Thank you for all help!
oldsamsungdevice said:
The problem is, it does not boot into the OS. No matter which buttons I press, it does not boot. It stays on this screen for a while and reboots. I cannot initiate download or recovery mode. I cannot turn off the device. It's in a boot loop.
Click to expand...
Click to collapse
I install Magisk 23 on a Galaxy TAB S2 and had a boot loop. I reinstalled the boot.img and twrp then reinstalled LinageOS and uninstalled Magisk - Then it was fully recovered. I don't know if the boot.img was necessary.
oldsamsungdevice said:
Hi, I have a Samsung Galaxy S10 SM-G973F. I unlocked the bootloader from the Download mode, then turned on the OEM unlock from the developer settings. I installed Magisk from github, created the patched firmware, then flashed all the files via Odin.
Now the S10 displays a warning that the bootloader has been unlocked, followed by the warning it's not running original samsung firmware, and an option to click the power button to continue.
The problem is, it does not boot into the OS. No matter which buttons I press, it does not boot. It stays on this screen for a while and reboots. I cannot initiate download or recovery mode. I cannot turn off the device. It's in a boot loop.
I used this firmware (I checked it's the correct one): https://samfw.com/firmware/SM-G973F/BGL/G973FXXSBFUF3
And followed this tutorial: https://yewtu.be/watch?v=V_IeG06skk4
I am not using TWRP. Thank you for all help!
Click to expand...
Click to collapse
Hi. I remember on stock A10 when I 1st rooted ,, I had to 'boot to magisk' by doing the button combo for recovery
Code:
bixby, power, volume up then let go of power after the splash screen
But with oneui 3x I think you'd have to use a reboot app. Or ask in this thread
Cheers.

Question (SOLVED) Help - Can't boot the device, stuck in "Redmi" bootloop. Can't enter in fastboot or recovery

Hi guys. today I tried to install a GSI rom on my device, everything is fine, it worked, but the brightness slider didn't work. To solve I read on the thread that I should, more or less, install a Magisk module, but when installing the patched boot on magisk, the phone started to bootloop, and I cannot enter fastboot or recovery to fix. I tried a lot of guides found both on this forum and on Google in general without solving the problem. How could i proceed?
Hi,
I do not know if this will work for you but, when my phone (Redmi note 10 5g) enters in a boot loop, I just keep the volume down button pressed and wait for the next reboot (30s max).
Doing this brings me to fastboot mode automatically.
Best of luck
This seems to only work if the bootloader is intact. If this method does not work, BROM mode needs to be used.

Categories

Resources