Database Develop

[Mod][4.1.2] AOSP Locksceen Toggle for TW Roms

I made an AOSP Lockscreen Toggle Made for the Note II and ported it over to the Note 10.1.
Let me know how it goes for you and I will try to work out any bugs and any mods I make for the Note II I will try to add to this as well if possible.
You need to flash both files for it to work. and don't forget to Backup.

Reserved

Works
It works, I just wish that we can edit function on the lock Screen, instead of being confined to unlock, Camera, and google .
a. addition to Our great device anyway ,
Thank you very much

screenshot ?

http://forum.xda-developers.com/showthread.php?t=2059567

Once I perform a nandroid, I will flash these

After testing this for awhile on Resurrection Rom, I can say that it freezes my tablet 40% of the time, so I disable it. I use HOLO lock screen now to mimic AOSP lock screen.

Not working on Dr. Akrim's v8 rom (4.1.2)
Still get the water effect after flashing both these files in recovery.
Guess this was not for 4.1.2, right?
Thanks anyway
EDIT:.....hmm, the OP does say it's for 4.1.2 - well, I could not get it to work in Dr. Akrim's v8 ROM

bert269 said:
Still get the water effect after flashing both these files in recovery.
Guess this was not for 4.1.2, right?
Thanks anyway
EDIT:.....hmm, the OP does say it's for 4.1.2 - well, I could not get it to work in Dr. Akrim's v8 ROM
Click to expand...
Click to collapse
You have to go into your system settings and enable it, it should be under lock screen options.

Thanks for this I hope to see some new moods here like this one thank you:thumbup:
Sent from my GT-N8013 using Tapatalk HD

Thank you
Sent from my GT-N8013 using Xparent Purple Tapatalk 2

I flashed this running on N8013-UEUCMA3-ARCMA3-XAR-deodexed ROM
After I flashed it, I'm getting some weird things like
Manage Accounts have "Push Subscriptions" instead of Gmail syncing
When changing fonts its says "More Fonts" for setting the fonts
I'm curious if anyone else is experiencing this issue
is there a certain order that these zips need to be flashed in? Do I have to reboot after each flash or can I flash both at the same time?
I really like this MOD, seems I don't know how to acurately unlock using the stock unlock method haha
EDIT:
Wiped, clean flashed the rom, checked and everything was good
Flashed the AOSP Lockscreen MOD and everything I mented before was broken
I also have this MOD installed N8013UEUCMA3-UnlimitedAppsMod just to let you know
Thank you in advance for letting me know if this is a me problem or a bug with this mod...

Any chance of getting this ported for XXCMC5?

Unlocking is not working. Im on ARHD rom. Weird.

[Q&A] [ROM][Unofficial][5.0] CyanogenMod 12.0 builds for I9295

Q&A for [ROM][Unofficial][5.0] CyanogenMod 12.0 builds for I9295
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Unofficial][5.0] CyanogenMod 12.0 builds for I9295. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

[thread deleted]

I'm running mythis latest build, incoming calls aren't working. Seems to have been a problem with jflte as well. apparently has been fixed by now. other than that no bigger problems.

bugs i found :
*cannot hang-up calls.
*no incoming calls while talking with somebody.

I love this stuff! This is a very great work. Thank you!
I am on build from 24.11. and i miss the reboot options by pressing on/off button. I must use a extra app to boot into recovery.
And my 64gb sdcard is not readable.
Something is draining my battery. I will take a look on it, and then I will report.
Greetings from Germany.
Gesendet von meinem GT-I9295 mit Tapatalk

Saalschlacht said:
I love this stuff! This is a very great work. Thank you!
I am on build from 24.11. and i miss the reboot options by pressing on/off button. I must use a extra app to boot into recovery.
And my 64gb sdcard is not readable.
Something is draining my battery. I will take a look on it, and then I will report.
Greetings from Germany.
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Read this and learn how to use hardware buttons to enter recovery mode
http://forum.xda-developers.com/showthread.php?p=56955843
... and download mode

Thanks, but I know this. I mean the comfortable function... Since update to build from 24.11. it works fine.
(edited)
My bugs:
- could not change notification (I could choice others, but it sounds everytime the same standard tone)
- could not change ringtone (same like notification)
- could not access 64gb sd-ext
- IR without function.
- found no cm option for customizing xD
I will change this post, if I find something more.
Gesendet von meinem GT-I9295 mit Tapatalk

f2fs
how do i format the partitions into f2fs?

Bluetooth doesn't work
This is a great ROM, but it doesn't work with bluetooth speakers. It would be great if you can fix this.
Thanks ) Have a nice day

On last build, IR does not work, I can't switch tones and how I can make screenshots?
Gesendet von meinem GT-I9295 mit Tapatalk

Is everything now working? Sms? Call?
Im new on xda. I want to root my active to 5.0 but im not so sure what will happen. Its my first time to do it. Any tips that you can share? Thanks
And lastly how to root this? Im on stock. I dont have the options on the tutorial like cwm? Can i use the one click installer? Or how? Many thanks!

Saalschlacht said:
On last build, IR does not work, I can't switch tones and how I can make screenshots?
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Screenshot as usual in android 4+, Volume down+power.
For IR, mine works (i use app "samsung ir universal" whit my dsl camera )
Switch tones? I use an mp3 like ringtone or nitification sound, no problem at all.
I don't know if it's the problem, but in the original thread of the porting, it's written that from last version it's necessary format system before flash.
I do it, and all works well except mic in handsfree mode
agfyabut said:
Is everything now working? Sms? Call?
Im new on xda. I want to root my active to 5.0 but im not so sure what will happen. Its my first time to do it. Any tips that you can share? Thanks
And lastly how to root this? Im on stock. I dont have the options on the tutorial like cwm? Can i use the one click installer? Or how? Many thanks!
Click to expand...
Click to collapse
To root you have to flash supersu from chainfire. Except for mic in handsfree, all seems to work well for me (oh, i can't use ncf in Italy, so i don't know)

How can I install the latest build? I download it but it is .md5sum, I only managed to install cm-12-20141122-UNOFFICIAL-jactivelte.zip with cwm, it looks great but i can't receive calls.

ThEpLaYeR001 said:
How can I install the latest build? I download it but it is .md5sum, I only managed to install cm-12-20141122-UNOFFICIAL-jactivelte.zip with cwm, it looks great but i can't receive calls.
Click to expand...
Click to collapse
Can you post a screenshot? Im so excited to the official release. I cant wait to see it in my phone. Im a fan of s4 active but i want android 5.0 on it

ThEpLaYeR001 said:
How can I install the latest build? I download it but it is .md5sum, I only managed to install cm-12-20141122-UNOFFICIAL-jactivelte.zip with cwm, it looks great but i can't receive calls.
Click to expand...
Click to collapse
Sorry but at this link (https://drive.google.com/folderview?id=0BzJzDM42pkRvZWtXWG5Gams0QU0&usp=sharing#list) i can see every build , as a zip and whit md5 check. In fact i has now latest build installed.
I'll post some screen

I clicked the same link but downloaded the other file, I don't know how I didn't see the zip one.
I feel so stupid right now...

No problem, happens to me too Whit Pac links some week ago ?
Some screnshot

sartana said:
No problem, happens to me too Whit Pac links some week ago ?
Some screnshot
Click to expand...
Click to collapse
it looks awesome on s4 active. can you help me how to do it? im newbie on rooting on android. can you help me? also is the sms and calls working now?

All working. except for bluethoot in car (some lags) and speakermode (there's a way to fix but only for user whit experience in android)
I assume you're on stock Rom, right? And you have int version i9295 (nor i537)
There are some passages to do:
1)download and install CWM recovery
2)download and install Rom
just follow this guide to understand Recovery mode and download mode
http://forum.xda-developers.com/gal...to-start-recovery-mode-download-mode-t2949209
to flash recovery follow this
http://forum.xda-developers.com/showthread.php?t=2752469
To flash Rom, simply download Rom and Gapps from thread, and grab supersu from this link
http://download.chainfire.eu/636/SuperSU/UPDATE-SuperSU-v2.37.zip?retrieve_file=1
Then copy all file on sd, go in recovery mode and do
1)Wipe Data / Factory Reset
2) Flash Rom
3)flash gapps
4)flash supersu
5)reboot and if recovery ask to fix root, tap NO
Enjoy (and don't forget to thanks all people in thread above, and me of course )

How is the battery life compared to the stock?

Advantages of CM 12.1 over stock with different laucher

At the moment I'm very satisfied with my rooted fire having stock firmware and Nova launcher.
Anyway, many people are happy about having the possibility to change from stock to CM 12.1 firmware.
Question is: what are the main advantages of CM 12.1 compared to a rooted stock firmware?
Gesendet von meinem KFFOWI mit Hilfe von XDA Forums

oliman99 said:
At the moment I'm very satisfied with my rooted fire having stock firmware and Nova launcher.
Anyway, many people are happy about having the possibility to change from stock to CM 12.1 firmware.
Question is: what are the main advantages of CM 12.1 compared to a rooted stock firmware?
Gesendet von meinem KFFOWI mit Hilfe von XDA Forums
Click to expand...
Click to collapse
Too numerous to list
add icons to notification bar (battery %, weather/temp), change lockscreen...

oliman99 said:
At the moment I'm very satisfied with my rooted fire having stock firmware and Nova launcher.
Anyway, many people are happy about having the possibility to change from stock to CM 12.1 firmware.
Question is: what are the main advantages of CM 12.1 compared to a rooted stock firmware?
Gesendet von meinem KFFOWI mit Hilfe von XDA Forums
Click to expand...
Click to collapse
I am using CM for 2 days now
+ Square.Home launcher is finally fully working (on stock firmware - widgets and notifications where not avaliable for it, even after made it system)
+ Modded playstore with patched jar file (was not able to patch it on original)
+ Normal downloads (It was so stretched, made my eyes bleed)
+ Much more free space - and much less in-built ****
+ Normal system search (say bb to bing)
+ Normal system settings (Manual time set, full Notifications management, accounts management, etc)
- No bluetooth
- No SIM icon (can be fixed now, i am just too lazy)
- No battery stats

I tried out CM12.1 and while it's great to have stock, playing videos isn't working quite right (the system seems to hang for about 15 seconds, plays a bit of video, then hangs again, and repeats). I got Netflix to work, but PLEX and other forum apps didn't work right.

my only problem with CM 12.1 atm is no exFat or NTFS support, so my 64gb and 128gb sdcards are useless

Splines said:
I tried out CM12.1 and while it's great to have stock, playing videos isn't working quite right (the system seems to hang for about 15 seconds, plays a bit of video, then hangs again, and repeats). I got Netflix to work, but PLEX and other forum apps didn't work right.
Click to expand...
Click to collapse
Users have reported a couple potential solutions in the CM12.1 thread. Which videos hang for you? I actually haven't seen that on my Fire yet.
Deuces said:
my only problem with CM 12.1 atm is no exFat or NTFS support, so my 64gb and 128gb sdcards are useless
Click to expand...
Click to collapse
It's odd, I've seen reports that they don't work & reports that they do work for some people. No mention of having to reformat or anything to get it working.
Just tried my 64gb samsung evo card, no joy, CM12.1 does not see it.

blueberry.sky said:
Users have reported a couple potential solutions in the CM12.1 thread. Which videos hang for you? I actually haven't seen that on my Fire yet.
Click to expand...
Click to collapse
PLEX was the big one for me. I'd see the first frame of video, then the system would freeze (no response to tapping back/home), then 10-15 seconds later it might play a few more frames, then do the same thing. .gifv links in imgur also fail to animate in Chrome (and I think I tried Firefox).
No problems with video using FireOS.

Deuces said:
my only problem with CM 12.1 atm is no exFat or NTFS support, so my 64gb and 128gb sdcards are useless
Click to expand...
Click to collapse
You can format a 64 Gb in FAT 32 with guiformat.

Splines said:
PLEX was the big one for me. I'd see the first frame of video, then the system would freeze (no response to tapping back/home), then 10-15 seconds later it might play a few more frames, then do the same thing. .gifv links in imgur also fail to animate in Chrome (and I think I tried Firefox).
No problems with video using FireOS.
Click to expand...
Click to collapse
Same story, video doesn't work under CM 12 while there is no problem with Fire OS.

Splines said:
PLEX was the big one for me. I'd see the first frame of video, then the system would freeze (no response to tapping back/home), then 10-15 seconds later it might play a few more frames, then do the same thing.
Click to expand...
Click to collapse
fredm77 said:
Same story, video doesn't work under CM 12 while there is no problem with Fire OS.
Click to expand...
Click to collapse
SlimLP developers csolanol, diegocr have put out an update, v2.0, just yesterday 12/01 with a fix (or potential fix) for video. Post 47. At least one report that it fixed plex. Post 60:
RW2112 said:
Just flashed the new rom and got to say THANK YOU!
Before I had problems playing videos in both VLC and Plex, both are now working flawlessly!
Click to expand...
Click to collapse
I've personally only tried youtube in firefox & local video files in vlc & mx player. Those worked fine for me in CM v2015-11-22.
Fixes for various bugs and new rom updates seem to be coming fast. At least to me. Untethered boot from ggow, OTG, battery stats, no sim bug, bluetooth, multiuser, video fix, feels like every couple days there is an improvement. Major props to all developers & contributors.

blueberry.sky said:
Users have reported a couple potential solutions in the CM12.1 thread. Which videos hang for you? I actually haven't seen that on my Fire yet.
It's odd, I've seen reports that they don't work & reports that they do work for some people. No mention of having to reformat or anything to get it working.
Just tried my 64gb samsung evo card, no joy, CM12.1 does not see it.
Click to expand...
Click to collapse
Use Fat32 format, the card will be seen.

fredm77 said:
Same story, video doesn't work under CM 12 while there is no problem with Fire OS.
Click to expand...
Click to collapse
Admittedly I've only tested for a few minutes on a couple of movies, one basic mp4 and one divx but I had no problems with MX using the latest CM build. As blueberry.sky said the devs are working their little cotton socks off on this and achieving rapid progress.
Big thanks to ggow et. al.

oliman99 said:
At the moment I'm very satisfied with my rooted fire having stock firmware and Nova launcher.
Anyway, many people are happy about having the possibility to change from stock to CM 12.1 firmware.
Question is: what are the main advantages of CM 12.1 compared to a rooted stock firmware?
Gesendet von meinem KFFOWI mit Hilfe von XDA Forums
Click to expand...
Click to collapse
Lockscreen can be changed, all widgets work with any launcher, debloated all of amazon, cyanogenmod customization, etc. I have run my Fire in both stock rooted with a launcher and with Cyanogenmod, trust me it is worth it.

kramalot said:
Admittedly I've only tested for a few minutes on a couple of movies, one basic mp4 and one divx but I had no problems with MX using the latest CM build. As blueberry.sky said the devs are working their little cotton socks off on this and achieving rapid progress.
Big thanks to ggow et. al.
Click to expand...
Click to collapse
I reinstall last version of CM, install MX Playrer and the AIO Codec neon and did the two settings reco. It works perfectly. Thanks for support and the great job done by the CM 12.1 team.

oliman99 said:
At the moment I'm very satisfied with my rooted fire having stock firmware and Nova launcher.
Anyway, many people are happy about having the possibility to change from stock to CM 12.1 firmware.
Question is: what are the main advantages of CM 12.1 compared to a rooted stock firmware?
Gesendet von meinem KFFOWI mit Hilfe von XDA Forums
Click to expand...
Click to collapse
What a little adventure ??? Do it. You will only gain.
Sent from my YU4711 using Tapatalk

alok_ said:
What a little adventure ??? Do it. You will only gain.
Sent from my YU4711 using Tapatalk
Click to expand...
Click to collapse
You were absolutely right - I'm on SlimLP now and very satisfied
Thx.
Another question: is it possible/advisable transfering the SlimLP-installation from one Fire to another Fire via TWRP-backup/restore, or is there any danger messing up with google sync or something else?

oliman99 said:
Another question: is it possible/advisable transfering the SlimLP-installation from one Fire to another Fire via TWRP-backup/restore, or is there any danger messing up with google sync or something else?
Click to expand...
Click to collapse
Why wouldn't you just do a clean install? Getting the device to TWRP is 90% of the effort. If you are going from stock to a custom ROM, you really should wipe out all the old data.

TallGrassShort said:
Why wouldn't you just do a clean install? Getting the device to TWRP is 90% of the effort. If you are going from stock to a custom ROM, you really should wipe out all the old data.
Click to expand...
Click to collapse
Well, I got two devices. One is on stock (rooted and so on) the other one is on SlimLP since today. On SlimLP's device I've downloaded all the apps needed and made all the configurations I want. So if I could backup/restore the SlimLP (with all the apps and configurations) to the stock device I'd save about 2-3 hours of work.

oliman99 said:
Well, I got two devices. One is on stock (rooted and so on) the other one is on SlimLP since today. On SlimLP's device I've downloaded all the apps needed and made all the configurations I want. So if I could backup/restore the SlimLP (with all the apps and configurations) to the stock device I'd save about 2-3 hours of work.
Click to expand...
Click to collapse
Yes, that should work fine.
restore system has not worked for me, stock or cm12.1, so I have been
In Twrp: Install rom, Supersu, gapps, then restore> uncheck all except data>swipe to restore

Like what shadow said.. Both systems are altered after boot ( differ even just slightly) so completely porting may crack your wallpaper but its safe .. You should try it .. If I were you .. I would have tried 2 different roms on each.. But yeah it takes time .. So ...
Sent from my YU4711 using Tapatalk

[ROM][N8000][4.4.2] Stock 2016-04-02 N8000XXUDPB1 Deodexed/Zipaligned/Root/Busybox

Hello guys, I'm just sharing with you the latest 4.4.2 rom for this tablet, released this year on 2016-04-02 for Luxembourg.
*This Rom have been Deodexed, Zipaligned, Rooted and includes Busybox.
*This Rom was made by @Teflanzy as a favor for me, all credit goes to him!!
Since everything is working awesome, I decided to ask him permission to share it with u guys.
So here u got it:
DOWNLOAD
-----------------
**ROM**
Google Drive:
https://drive.google.com/file/d/0B_-JMtGLOAd3cWRNa2hNZnc4Z2M/view?usp=sharing
MEGA:
https://mega.nz/#!l1N2mQID!Ki2gC5TB20sU3bsuz0lnSkA6lNiXdcsf1dbkXCT399E
**Xposed Installer working for this ROM**
http://forum.xda-developers.com/attachment.php?attachmentid=3559144&d=1448805545
Thanks to @SolarWarez
Please make a full nandroid backup before flashing.
Neither @Teflanzy or I will make responsable for any damage made to your device, flash at your own risk.
Happy Flashing!
PS: Later I'm gonna share my configuration so u can enjoy it even more.
**UPDATE**
My Configuration (Not Included With the ROM):
-----------------------------------------------------------
-Set "Airplane Mode" always On to reduce Network Battery Drain When using the tablet connected to WiFi without any SIM card inserted.
-Boeffla Kernel 3.2 with Boeffla-Config V2 App Installed
Kernel Thread: http://forum.xda-developers.com/showthread.php?t=2457996
Awesome kernel with a lot of options and some presets Standard, Battery Saving, Perfomace, etc..
Most of the time when I need good performance I load the "Power" preset within the Boeffla-Configuration App, the tablet runs really smooth without compromising the battery, or u can try u r on settings like oc to 1600Mhz, etc.
-Xposed Installed with the following modules:
*APM+: Advanced Power Menu+ is an Xposed Module which allows you to customize various aspects of your power menu.
*App Settings: This mod targets settings which all apps share, and allows you to change those values on a per-app basis.
*Youtube AdAway: Get rid of ads on the official YouTube App.
*Youtube Background Playback: Enable background playback in YouTube and playback control via notification.
-Apps Bought From Google Play:
*Greenify Donation: Greenify help you identify and put the misbehaving apps into hibernation when you are not using them, to stop them from lagging your device and leeching the battery.
*Nova Launcher Prime: Nova Launcher replaces your home screen with one you control and can customize. Change icons, layouts, animations and more.
*1Weather Pro: 1Weather features a clean, modern design that provides you with essential weather info at a glance.
*Floating Toucher Premium: Floating Toucher is a button that floats on your screen over other apps, and you can move it anywhere. You can customize the panel functions, picking your most commonly used switches or favorite apps.

Would you please upload it to mega drive?
I cannot access google from China.
Thanks a lot!

fsm said:
Would you please upload it to mega drive?
I cannot access google from China.
Thanks a lot!
Click to expand...
Click to collapse
Rom Uploaded to MEGA, check OP

Looks like a great ROM, I wish I could use it but I have the n8013. Any idea if this will work on my device?

detroyerx said:
Rom Uploaded to MEGA, check OP
Click to expand...
Click to collapse
Thanks a lot!
This rom is very smooth.

Thanks for this !
My N8000 has been so laggy these last weeks that even going back from apps list to the home screen could easily take 30 seconds, and even cause it to reboot.
I prefer to have it usable under KK rather than up to date (LP, MM) and useless.

Analog33k said:
Thanks for this !
My N8000 has been so laggy these last weeks that even going back from apps list to the home screen could easily take 30 seconds, and even cause it to reboot.
I prefer to have it usable under KK rather than up to date (LP, MM) and useless.
Click to expand...
Click to collapse
Exactly! That's why I made this

zonedgold said:
Looks like a great ROM, I wish I could use it but I have the n8013. Any idea if this will work on my device?
Click to expand...
Click to collapse
I don't really know...

Hello people,
Coming from a later version (CM-based Lollipop or Marshmallow), is there a recovery-flashing step before diving into this ?
Thanks.

Analog33k said:
Hello people,
Coming from a later version (CM-based Lollipop or Marshmallow), is there a recovery-flashing step before diving into this ?
Thanks.
Click to expand...
Click to collapse
U will have to go back to a stock rom.
1.- Go to sammobile and download a stock 4.4.2 rom for this tablet, u can download the same base this rom is made of ( N8000XXUDPB1 for Luxembourg ).
2.- Then root, flash a custom recovery (I recommend Philztouch), make a full nandroid backup just in case.
3.- Flash this rom.
That's it.

Thanks dude. All went well. Up and running, smooth and fast. ?
Tapatalked from my Note 3

Snote doesn't work. Thanks
أرسلت من GT-N8000 بإستخدام تاباتلك

please confirm whether S Note is working or note..
its just unlikely not working i guess..

sevensaints said:
please confirm whether S Note is working or note..
its just unlikely not working i guess..
Click to expand...
Click to collapse
Yes. not working on my pad.

Im goona look into it, to see what i can do!
sorry guys...

thanks for this.
if you happen to have time and you still got the beoffla kernel.. can you please upload it and link it to me
thanks v.m.

sasori123 said:
thanks for this.
if you happen to have time and you still got the beoffla kernel.. can you please upload it and link it to me
thanks v.m.
Click to expand...
Click to collapse
http://kernel.boeffla.de/n8000/boeffla-kernel/Stable_kk44/

thanks dude. but i still have the issue after flashing the kernel. i just thought that if i flash a custom kernel it will solve my tab issue.
my problem with my tab is it only stays at 0% even i replaced battery 3 times..
and flashed stock rom and custom roms
tried different charger also.. and still 0%
i dont know what else i can do (

sevensaints said:
please confirm whether S Note is working or note..
its just unlikely not working i guess..
Click to expand...
Click to collapse
I restored the red S Note from titanium backup and it's working fine.

Great upload!
Does this work on N8013 also?
Thanks a lot

[ROM] Pixel Edge V 1 By Full Of Hell & Metabolic12

We would like to thank Allooosh98 for the awesome base, parth11199 for the system UI, ShreeshSingh for the sounds and some google apps, Moluntic for the ported apps, And Laelson for some apps as well. Thank you to Arise Sound Systems for the killer sound and other audio mods. Also, big thanks to Messi2050 for all his work for the J7 and Ashyx for everything he does for this device as well. We appreciate everything guys and without everyone's contributions collectively to the XDA community, we would all be stock miserable. So keep it up everyone. IF we have forgotten anyone we are very sorry as we are super busy and we didn't mean to.
Pixel Edge V 1
Rom: https://mega.nz/#!tuo3waKZ!8zDlDfNkfQ6JFIl9K7MorK9bB0lAkcvVceMv6d7_-2c
Boot Logo:https://mega.nz/#!gjgSzCaS!NOy_vz1lgGlZdmsuc2-qoWr9eSTHN7ht7Pn158kWOKg
Full System SuperSu 2.82:https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120 Use the 3rd one
Encryption Breaker:https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Install instructions:
Download all files and place on external SD card.
Make FULL Nandroid backup. We are not responsible for your phone being bricked. As you know flashing custom recoveries and/or roms voids your warranty.
Wipe dalvik, cache, data, and system
Flash Rom, Root, pixel logo, and encryption breaker. Reboot. First boot takes about ten minutes.
Activate all xposed modules after setup and then reboot.
V2 is in active development.
stay tuned...
XDA:DevDB Information
Pixel Edge V 1, ROM for the Samsung Galaxy J7
Contributors
fullofhell, Metabolic12, Allooosh98,parth111999,ShreeshSingh,Laelson
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: J700TUVU3AQC3
Version Information
Status: Stable
Current Stable Version: Version 1
Stable Release Date: 2017-11-07
Created 2017-07-12
Last Updated 2017-07-12

In addition to the installation instructions there is a bug we have to fix with the Google dialer.after first boot, go to settings, applications, default apps, calling app, then manually select phone. Will fix on v 2. Sorry

Reserved

Hey
Nixe work bro
Owsm guys

Oves786 said:
Hey
Nixe work bro
Owsm guys
Click to expand...
Click to collapse
Thank you !

Oves786 said:
Hey
Nixe work bro
Owsm guys
Click to expand...
Click to collapse
Right on bro!

is anyone having issues with viper. I am getting driver installed failed due to faulty busybox. then it says i might not be completely rooted.

gizm0luvsu said:
is anyone having issues with viper. I am getting driver installed failed due to faulty busybox. then it says i might not be completely rooted.
Click to expand...
Click to collapse
Wow that is weird.im using it and it's fine..I'll do some checking. Try relashing SuperSU and if it doesn't help, dirty flash the rom.dont wipe. That may fix it. Please keep us posted

gizm0luvsu said:
is anyone having issues with viper. I am getting driver installed failed due to faulty busybox. then it says i might not be completely rooted.
Click to expand...
Click to collapse
Update, it was working for me cuz I was using our test version. I since flashed the ROM and I'm having same prob.we will figure out a fix ASAP. Sorry man. I may have goofed on something when I was adding some things.ill check it out soon as I can.

fullofhell said:
Wow that is weird.im using it and it's fine..I'll do some checking. Try relashing SuperSU and if it doesn't help, dirty flash the rom.dont wipe. That may fix it. Please keep us posted
Click to expand...
Click to collapse
I have a fix fothe viper. Give me a minute and I'll upload the fix.

Metabolic12 said:
I have a fix fothe viper. Give me a minute and I'll upload the fix.
Click to expand...
Click to collapse
I fixed it. I have a flash able zip that fixed the issue. But I have another huge bug. I can not receive any incoming calls. My phone rings and I hear the call but that screen that pops up saying this person is calling swipe left to answer never comes up. Also if you make a call that i call screen doesn't show up either so you can't hang up or enter anything.
Sent from my SM-G935T using Tapatalk

Man dang it. Vekenti reported the same issue but I was hoping it was just him.

Look just go to default apps choose phone.i forgot I was meaning to add that in install instructions. Reboot and it's fine....

My bad guys!

that fixed it like a charm

Can we get the flashable viper fix please? Thx in advance, not being impatient either

ctindell1981 said:
Can we get the flashable viper fix please? Thx in advance, not being impatient either
Click to expand...
Click to collapse
I just flashed deutoronomy 2..3.3 and that fixed the whole viper problem.

This bug may be the same bug associated with the dreamux rom when it comes to bluetooth. When i connect a bluetooth device of any kind to this rom the device all of a sudden lags to the point where the device is unusable. As soon as i turn off the bluetooth device and it disconnects from the phone. In a few seconds, the phone goes back to normal and everything is fine

gizm0luvsu said:
I just flashed deutoronomy 2..3.3 and that fixed the whole viper problem.
Click to expand...
Click to collapse
I flashed Magnum Opus and the driver they use is busted. If you flash XtremeMusic after ARISE then delete ViperFX it processes great. Magnum Opus sounds twice as good as Deutoronomy.

I gotta say i love this rom. It is very stable. With the exception of the bluetooth bug. This is a very stable rom.