Related
I'm member of AOKP team and I decided to share my personal builds of AOKP ROM called AOKPK.
AOKPK is unofficial AOKP ROM compiled with SM 4.8.3 toolchain (thanks to Paul Beeler) and with some other stuff.
This ROM was created for my personal needs. If you don't like some major part of it, don't ask to change, just use official AOKP builds. But, If you have some tips for minor patches and features, you can ask for it. Just attach link to github/gerrit.
AOKPK is non-CAF and uses my fork of franco.Kernel with latest linux patches and O3 optimized.
So, what is inside?
All official features from AOKP (https://github.com/AOKP, http://gerrit.sudoservers.com/#/q/status:merged,n,z)
Compiled using SM toolchain (https://github.com/SaberMod)
Included forked franco.Kernel (https://github.com/kecinzer/francoKernel_mako) in-line builded with some added stuff
cLock (aka Chronus) with integration into RomControl
Many usefull cherry picks from AOKP gerrit (http://gerrit.sudoservers.com/#/q/status:open,n,z)
I compile ROM at daily basis so consider it as daily builds.
Few days ago I decided to make "stable" build sometimes, when I got good responses from people.
All builds are available on goo.im (http://goo.im/devs/kecinzer/aokpk/mako) with Goo Manager OTA update compatibility.
Temporarly you can download also here (http://aokpk.no-ip.org/mako/).
I recommand TWRP Recovery and Goo Manager (for recieving OTAs).
Please don't ask about changelog, because I adding cherry picks often and it's very hard to keep trail with it. But I'll try to make changelog for "stable" builds.
And please don't expect much of support, because as it's been told - this ROM is primary dedicated for my own needs.
BTW. I also building for FLO and HAMMERHEAD.
Gapps
I use Banks standard - http://goo.im/devs/BaNkS/GApps/4.4.2
If you like my builds you can buy me a beer by "Donate to me" button .
Donations
mrbackdoor - $25
brandon fry - $20
tehSecret - $20
Gustave17 - $15
hazopoulis - $6
Thank you!
Welcome here !:thumbup:
Running the 19/10 build currently
Do you mind if I will add a mirror for the last build , apparently goo.im is down , replacing servers I guess
sent from my Darkside of Nexus 4
Here is mirror - http://aokpk.no-ip.org/mako/.
thanks for the new thread!
kurniawan77 said:
Share the zip bro... We all so lazy
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
mixtapes08 said:
Yes please compile a faux kernel i need his sound enhancements mod.. Thanks
Sent from my Nexus⁴
Click to expand...
Click to collapse
Here ya go. It is the kernel with prima from kecinzers 1018 build faux123-kecinzer-JWR version just flash!I am just sharing this with those who ask for it,I took from the 1018 build along with Prima that is all.Do not forget some had issues with watchdog(demigod)on this kernel, so if happens reset (volume down) if continues go back to original or reflash ROM best choice is just make a nandroid..hope it helps the ones that asked for it.Thanx Petr (kecinzer) for all your work..
FILE .zip has been removed outdated...
Finaly you have your own thread. Thanks for your work and for awesome cherrypicks. Keep it up.
AOKP with Franco kernel JWR really really cool
thank you for sharing the rom
Finally.
I use 19/10 build, my gratitude.
Works very well.
Let the madness begin
Sent from NEXUS⁴ via XDA Prem [AOKP 4:3:1]
antebr said:
Finally.
I use 19/10 build, my gratitude.
Works very well.
Click to expand...
Click to collapse
Does aokpk have expanded desktop??
4NDR345 said:
Does aokpk have expanded desktop??
Click to expand...
Click to collapse
Not that option but you can use navbar toggle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent from my Darkside of Nexus 4
Was waiting for this ,keep up the great work :good:
@churchmice please move your mod over to the new thread-as it will be of no use over at the old one.
Excellent, I do hope that kecinzer is planning on buying an N5?
Sent from my Nexus 4 using Tapatalk
xanthrax said:
Not that option but you can use navbar toggle
sent from my Darkside of Nexus 4
Click to expand...
Click to collapse
Ok thanks...iam gonna move to this rom
Love this build! Thanks for all you do brotha
nice to see this thread
for the info, about not showing nexus on PC in MTP mode, when i disabled USBdebug and change once to PTP, then on MTP..internal storage showed up on my PC WIN 7...
so im wondering is it worth to flash dePRIMAtor, and franco kernel mod by @churchmice..?
Whats your opinion guys?
Mybe just in case if flash of factory image is needed?
greets
grgana said:
nice to see this thread
for the info, about not showing nexus on PC in MTP mode, when i disabled USBdebug and change once to PTP, then on MTP..internal storage showed up on my PC WIN 7...
so im wondering is it worth to flash dePRIMAtor, and franco kernel mod by @churchmice..?
Whats your opinion guys?
Mybe just in case if flash of factory image is needed?
greets
Click to expand...
Click to collapse
the same thing happens to me from time to time and I do exact samething and it also fixes this issue .I personal see it more as an inconvenience than an issue for me anyways. just a little buggy is all ..Hope that helps ur decision ..
Just my feedback:
I'm still getting a FC on Settings->Storage? on the latest build 1020 (gapps, dePRIMA'd, superSU v1.65 and Franco 191 JWR - which is my standard setup)
Although I'm not getting it on the ROM, gapps, superSU and the kernel that comes with ROM, so thats what I'll run.
Anyone else, anyone know why? Apologies if this is what was being covered in the tail of the last thread.
What I find odd is that I've run all the AOKPK ROMs in the past with superSU and Franco 191 JWR without this issue (or at least I think I have) ?
ben_pyett said:
Just my feedback:
I'm still getting a FC on Settings->Storage? on the latest build 1020 (gapps, dePRIMA'd, superSU v1.65 and Franco 191 JWR - which is my standard setup)
Although I'm not getting it on the ROM, gapps, superSU and the kernel that comes with ROM, so thats what I'll run.
Anyone else, anyone know why? Apologies if this is what was being covered in the tail of the last thread.
What I find odd is that I've run all the AOKPK ROMs in the past with superSU and Franco 191 JWR without this issue (or at least I think I have) ?
Click to expand...
Click to collapse
the kernel built in is franco but with prima drivers instead. why do you want stock franco kernel? prima drivers on stock franco is better imho than normal franco. not in terms of speed or anything but in terms of wifi/data/2g/3g/4g whatever.
btw, thank you so much @kecinzer for making a thread. it was hard to keep track of everything in the old one. now i can subscribe to this and monitor it every day! 5stars thread.
1ceb0x said:
the kernel built in is franco but with prima drivers instead. why do you want stock franco kernel? prima drivers on stock franco is better imho than normal franco. not in terms of speed or anything but in terms of wifi/data/2g/3g/4g whatever.
Click to expand...
Click to collapse
Whilst I totally hear what you're saying, I like to run the "stock" Franco, so that I can use the FKU app, comment in his thread and update whenever he releases without waiting for a third party, no offense intended to anyone else.
Franco wrote the kernel and he choose not to include the updated drivers or build with additional tool chain options, so I'd like to run it as the creator intended (and the "god" pun isn't intended).
Moretz Kernel 0.2.2 - Galaxy Note 8.0 EditionGT-N5110 & GT-N5100
Features:
Linux 3.0.101
Frandom
Network speed enhancements
Dynamic read ahead
CPU OC to 1.8GHz
GPU OC to 533MHz
CPU Voltage Control (OV/UV)
Tuned ZZMoove CPU governor (removed all other governors)
Intelligent CPU core hot plugging
Touchboost control, set to 800MHz
ARM CPU topology
LCD frequency switching (40Hz on screen dim, 60Hz on active)
Intelligent GPU scaling (Mali GPU control)
Lots of other fixes/tweaks
Intelligent zipalign at boot (init.d)
Intelligent sql db optimization at boot (init.d)
So, what's so special here?
A few things actually. I grabbed various code bits from many well known developers and worked some of my own magic on this build. First, I bumped the kernel up to 3.0.101 (FINAL) form kernel.org as a base on top of the stock CM 11.0 kernel. Once I pushed all of the enhancements listed above, I focused on tuning ZZMoove to balance performance and battery. I believe I've succeeded in that realm, so all other governors have been removed. This is a flash and forget kernel package. That's what makes it special ... the users do not have to do any tuning, it works, and it works well.
Credits:
Faux123, Andy P, googyanas, psndna88, ryukuri, sbrissen, Cyanogenmod team and may others. Please let me know if I missed you.
Source Code:
https://bitbucket.org/carvsdriver/android_kernel_samsung_smdk4412 (Moretz-New Branch)
Standard Disclaimer:
By flashing this you hold the developer (car vs driver) and anyone else not responsible or liable for any damage to your device, up to and including hard bricking. Basically, there's no warranty - flash at your own risk.
This release is not affiliated to CyanogenMod or Cyanogen Inc. This is my own personal work with lots of kangs from others.
This was tested with CM-11 on a GT-N5110 device. Any other devices or ROMs may not work or exhibit poor behavior. That being said, I only support use of this kernel with CM-11 and the GT-N5110.
Requirements:
Device - Samsung GT-N5110
ROM - CyanogenMod 11.0
XDA:DevDB Information
Moretz Kernel - Galaxy Note 8 Edition (N5110 & N5100), Kernel for the Samsung Galaxy Note 8.0
Contributors
car vs driver, psndna88, faux123, googyanas, AndiP, sbrissen
Kernel Special Features: GPU/CPU OC, UV/OV, UKSM, HotPlug, ARM Topology, LCD Freq Scaling, Linux 3.0.101
Version Information
Status: Stable
Current Stable Version: 0.2A
Stable Release Date: 2014-03-21
Created 2014-03-21
Last Updated 2014-07-03
Change Log:
Moretz 0.2.2 -- Upstream CM11.0 Changes Merged -- 7.4.2014
98865a3: n_tty: Fix n_tty_write crash when echoing in raw mode
7735075: mc1n2: Allow swapping of microphone ADC channels
ed8b659: smdk4412: update sound soc and codecs
5e96596: d710: build stage2 initramfs into kernel
8a5d38c: Fix CVE-2014-3153
6922ae0: Merge "synaptics_s7301: add disabling keypad" into cm-11.0
daf9635: Merge "smdk4412: cypress-touchkey - add keydisabler" into cm-11.0
fd94358: n_tty: Fix n_tty_write crash when echoing in raw mode
969b384: mc1n2: Allow swapping of microphone ADC channels
eba4e20: smdk4412: update sound soc and codecs
Moretz 0.2.1 -- Upstream CM11.0 Changes Merged -- 4.8.2014
c0dce37: dm crypt: optionally support discard requests
15b6c83: dm table: share target argument parsing functions
1886fef: dm: ignore merge_bvec for snapshots when safe
2b791d9: dm: suppress endian warnings
Moretz 0.2a -- Initial Release -- 3.21.2014
Instructions:
1. Download the flashable zip
2. Reboot into recovery
3. Flash the zip
4. Reboot
5. Done
I like to make things simple. Let your device boot up and that's it. No configuration necessary. But, if you want to screw with the CPU governor and ZZMoove settings, I made that easy for you. Just edit the zzmoove file in your init.d directory with the settings you want and reboot.
Click to expand...
Click to collapse
Code:
[CENTER][SIZE="5"][COLOR="Magenta"][B]GT-N5110 Download link:[/B][/COLOR][/SIZE]
[url]http://d-h.st/Gkd[/url]
[B]Version[/B]: Moretz-0.2.2
[/CENTER]
Code:
[CENTER]
[SIZE="5"][B][COLOR="magenta"]GT-N5100 Download link:[/COLOR][/B][/SIZE]
[url]http://d-h.st/ZyZ[/url]
[B]Version[/B]: Moretz-0.2.2
[/center]
Just a couple more things ...
Please do not post mirrors, if one is needed just let me know and I'll post one.
Please leave a review on this project by clicking here.
If you like my work, feel free to buy me a beer or pack of guitar strings by donating.
Click to expand...
Click to collapse
[/CENTER]
How to properly report bugs:
When reporting a bug, you must provide me with some very specific information so that I am able to either reproduce the problem or diagnose it based on logs. If you cannot provide information that I need, I cannot attempt fix the issue.
If the device is crashing:
Please make a copy of your last_kmsg immediately after rebooting the device.
Please make a copy of your logcat for the subsequent reboot.
Attach both files to your bug report and specifically state exactly what happens (are there steps to reproduce it?).
In all cases, please provide a logcat of when the issue occurs or specifically describe what is happening and how you can reproduce the error.
If you have any current issues prior to flashing my kernel, don't expect me to fix them.
The more detail you provide, the more helpful your bug report will be for me.
Feature Requests:
I'll make this one easy, I don't do feature requests. I used to do that, it became a real pain in the ass to keep everyone happy and the project I was working on bug free. Put simply, I put this together to work specifically for me and then decided to share it here. If at some point I decide to add new features, then I'll release new versions to you.
car vs driver said:
Reserved just in case.
Click to expand...
Click to collapse
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.
ztotherad said:
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.
Click to expand...
Click to collapse
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app
car vs driver said:
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
freakin' nice. definitely can't wait then! thanks again for your awesome gift to the Note 8.0 family.
is n5100 model will be supported in next future ?
messi2050 said:
is n5100 model will be supported in next future ?
Click to expand...
Click to collapse
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.
as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it
redukt said:
as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it
Click to expand...
Click to collapse
I suppose it should, I did a quick check and looks like that ROM uses the same base 3.0.y kernel that CM 11.0 does. The partition scheme on the devices is the same too (both devices us /dev/block/mmcblk0p5 for the boot partition) ...
There's only one real way to find out though, someone has to flash it - worst case is that it doesn't boot up.
Go ahead and give this a rip and let me know how it goes. It's the same build as the OP with the 5100 defconfig updated to include the features that I added for the 5110.
Download:
REMOVED ... SEE OP FOR DOWNLOADS
MD5:
7864a8e5eb18321c2201cba314fc7a06
If it doesn't boot, just reflash your previous ROM - that'll replace this kernel with whatever one is included there.
Yeah, kernel runs nice So I`ll kept my device on standby, make a wow raid and check the battery stats
Thx for your hard work
Assuming all goes well, I'll update the op to state that both devices are supported and working.
Sent from my Nexus 5 using XDA Premium 4 mobile app
car vs driver said:
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.
Click to expand...
Click to collapse
i'm using original rom 4.1.2 now so i can't test it sorry
3,5 h standby time loosing NOTHING in battery percentage - full 100% So I`ll check this tomorrow and report my results
edit: very nice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
edit: bug: no 3g network :/
Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>
car vs driver said:
give this one a rip:]
Click to expand...
Click to collapse
3G runs now
Many thanks for your quick reply
Excellent. I'm going to update the OP and support both devices then. Thanks for the quick turn around with testing, I appreciate it.
does anybody tested it on AOSB rom?
lolek2382 said:
does anybody tested it on AOSB rom?
Click to expand...
Click to collapse
yeppp, runs with AOSB 1.3.2
car vs driver said:
Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>
Click to expand...
Click to collapse
3G is working on my N5100 did I download the updated file just install a few minutes ago oh thankyou for supporting our tab the the Devs on the the better
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE
**Snapdragon™ is a registered trademark owned by Qualcomm Technologies Inc.
**Synapse™ is a registered trademark owned by @Andreilux
**(v1)Xcelerate Logo™ is created by @fareed_extreme
**(v2)Xcelerate Logo™ is created by @Sharan Narayan
XDA:DevDB Information
Xcelerate™ Custom Kernel, Kernel for the YU Yureka
Contributors
kairi_zeroblade, DooMLoRD, RohanAJoshi
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Production build 4
Stable Release Date: 2015-04-11
Created 2015-02-16
Last Updated 2015-04-11
Reserved
Short Credit list:
DooMLoRD for assisting in the compilation
Rohan Joshi, Prithvi Raju and Raj Gopi for testing
Cyanogen
ARM
Short Feature list:
Basic Governors(I won't add Ripoffs)
Built using my own GCC 4.9.x Toolchain(with fixes specifically Aimed at Cortex A53 erratas) built across the standards of Google's own Toolchain..
Simple and no fancy stuff..(more does not guarantee it's better)
Uses a simple free and user friendly application called Synapse by @AndreiLux for configuration purposes(slightly adding more functionality)
A few Notes:
Be advised that this kernel is best used "As is" i do want to prohibit the use of scripts that they say "enhances performance and battery" just use the kernel as it is..everything is managed automatically by the kernel and rest assured continuous innovations are en-route.
**Camera might be broke on OLDER CM11 and UNOFFICIAL BUILDS since this is built using the latest source from Cyanogen use this FIX
Compatibility list:
According to testers/users feedback the Kernel works on the FOLLOWING ROMS(tested)
CyanogenMod 11(Stable)
The list will grow as soon as Testers/Users can provide means and ways to make this compatible with everything..
Downloads
Grab latest Production builds here
Nice work mate :good:
BTW could have been much better if u could just left cm commits on git
so would have been easier for other devs to track earlier parent commit changes Rather than using : initial dump of Yureka source from CM snapshot 2-13-2015
Anyways no problems .....
Proud to be tester of this kernel..
working amazingly..
charging speed is double than before now..
also smoothness is awesome, thanks bro..
in call battery drain is dramatically reduced from 12% / hr to 6% / h..
will seek for further features..
does it shutdown cores when low usage ???
Not a fan of Custom Kernels, but...
but, yeah, but for the first time 'll be trying this (don't know why but I have this voice inside of me that's compelling me to try this out), hope everything goes well, will edit to share my experiences once I've used it for a couple of days, till then, thanks for this and appreciations for your efforts.
more governors please?
Thanks a lot! I had been waiting for this kind of a custom kernel!
hey, could you add smartassv2 governor to the kernel?
*downloading the kernel as i type*
Cheers!
:good: :good:
camera not working!!!!!!!!!!!!!!!!
sauravdante said:
camera not working!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Flash the updated kernel I have posted, it includes the libs, then flash xcelerate kernel, camera should work.
Op can add those libs.
No UCI support detected !
Damn ! OP enlighten me on this error when I try to open Synapse.
I'm rooted, I have the stock room that came with the cell, the ago had superuser permissions, but still I'm not able to get that app to work. Did a normal flash, booted into recovery, selected the zip that I downloaded and record again.
Googled for the error, found a post in which a guy having Xiaomi had the exact same problem, there you our someone suggested to flash normally, so that's kinda what I did, what m I missing ??
hkm93 said:
Damn ! OP enlighten me on this error when I try to open Synapse.
I'm rooted, I have the stock room that came with the cell, the ago had superuser permissions, but still I'm not able to get that app to work. Did a normal flash, booted into recovery, selected the zip that I downloaded and record again.
Googled for the error, found a post in which a guy having Xiaomi had the exact same problem, there you our someone suggested to flash normally, so that's kinda what I did, what m I missing ??
Click to expand...
Click to collapse
I am getting this. [emoji20]
hkm93 said:
Damn ! OP enlighten me on this error when I try to open Synapse.
I'm rooted, I have the stock room that came with the cell, the ago had superuser permissions, but still I'm not able to get that app to work. Did a normal flash, booted into recovery, selected the zip that I downloaded and record again.
Googled for the error, found a post in which a guy having Xiaomi had the exact same problem, there you our someone suggested to flash normally, so that's kinda what I did, what m I missing ??
Click to expand...
Click to collapse
Sudeep Duhoon said:
I am getting this. [emoji20]
Click to expand...
Click to collapse
Support for synapse is probably coming in the next builds..as I'm not familiar with the sysfs for the YU yet..I'm building this blind and with @RohanAJoshi only doing the tests for me.. rest assured its stable, fast and battery friendly..
EDIT:
I'm still looking for testers if someone is interested in hitting up to the task well you can find me on Hangouts via [email protected]
I am in pac man rom can i use this kernal?
proximity issue
Facing proximity issue after flashing this kernel.... Hope so this ll get fixed in upcoming builds nice work indeed
---------- Post added at 04:59 AM ---------- Previous post was at 04:55 AM ----------
Camera not working after flashing latest build
Been using for more than half a day. So far so good. thanks @kairi_zeroblade :good:
Testing your kernel on dumtara CM11 build.
Any possibilities of some custom governors that implement core hot plugging functionality ??
Error
satitrip said:
Click to expand...
Click to collapse
Dude, its already posted in the thread, Read first. Correct your image size, it covers my screen, seriously.
cm11 dumtara
I'm on cm 11 by dumtara. can I flash this kernel?
kairi_zeroblade said:
I'm still looking for testers if someone is interested in hitting up to the task well you can find me on Hangouts via [email protected]
Click to expand...
Click to collapse
I saw ur post regarding that, but I may not have mentioned this but I'm not so good in technical side of android. Being a java developer I never bothered about them but for the past few days I'm actually inclined towards learning android development too, say just as an additional hobby, and to my surprise it's Java too.
Now that I have already flashed the kernel, I can be of some use for sure, but conditions apply. I am not available all ( I can update you on a daily basis in between 10-11 pm IST, and on weekends if that's ok with you) the time and someone will have to guide me or provide info on what I'm supposed to do, coz I have no idea what needs to be done while testing a kernel.
Sudeep Duhoon said:
Flash the updated kernel I have posted, it includes the libs, then flash xcelerate kernel, camera should work.
Op can add those libs.
Click to expand...
Click to collapse
Thanks.. But which kernel should should I flash first and which one next.. Can you give download links pls.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom toolchain blu_gcc-8.2.0 (cortex-a73.cortex-a53 targeted, build with latest Crosstool-NG from GCC-8.2.0 snapshot)
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish builds based on ztemt/NX609J_O_kernel
Systemless installer (doesn't touch system partition, OTA friendly), AnyKernel2 (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
No OC, use 100HZ base timer frequency
msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver (Dynamic stune available)
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS, CIFS & NFS)
Removed verify and doesn't force encryption, patched SafetyNet flags to pass CTS
Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
Disabled hotplug, also on low battery levels (CTL and BCL)
Optimized crypto routines
Swap and adaptive LMK off by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel) [WIP]
KGSL fixes and reworked GPU driver
KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control [WIP]
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP (No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock ROM with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
Red Magic development unit donated by Nubia. Big shouts to them
Special thanks to Adam K. for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for nubia redmagic, Kernel for the ZTE nubia Red Magic
Contributors
eng.stk
Source Code: https://github.com/engstk/redmagic
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r36
Stable Release Date: 2018-09-04
Current Beta Version: r25
Beta Release Date: 2018-07-06
Created 2018-07-06
Last Updated 2019-11-29
blu_spark r25
First blu_spark kernel build is up, go get here
blu_spark extras v8.82
All right crew!
Here's an updated TWRP with all the blu_spark goodies inside and fully synced with TWRP Android-8.1 branch (including more recent upstream than official TWRP) and some specific device fixes.
Fully synced with TWRP 3.2.2+, name changing to reflect base 8.version. decryption, backup & restore, MTP, USB OTG and other basic stuff are working.
Delete your twrp settings or else issues may arise if coming from other version besides blu_spark.
twrp-3.2.2-x_blu_spark_v8.82_redmagic.img
build: TWRP 3.2.2-x | blu_spark v8.82
minuitwrp: Respect TARGET_RECOVERY_PIXEL_FORMAT config in screenshot.
minuitwrp: Add support for QCOM haptics vibrator.
android: release 8.1.0_r32
General cleanup
Device specific changes here
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Wakelock blocker info and example script
I'm just sharing my personal mods since people asked, meaning no support will be given (don't bother post about it).
If your cat get's on fire you're on your own ;p
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
blu_spark r28
All right crew!
New build is up :highfive:
Dynamic stune updates, wireguard updates and custom ROM support (use the custom zip, tested on OMNI)
Also checkout latest recommended blu_spark extras with blu_twrp v8.82
blu_spark_r28-redmagic_1903ca3.zip
blu_spark_r28-redmagic-custom_f9dba90.zip
sched/boost: Update functions for newer Dynamic Schedtune Boost changes
cpu-boost: Update functions for newer Dynamic Schedtune Boost changes
sched/tune: Rename dynamic_boost parameter to sched_boost, Switch Dynamic Schedtune Boost to a slot-based tracking system
sched/stune: Rename stune_boost() to do_stune_sched_boost()
wireguard updates (v0.0.20180708)
Anykernel2 updates
synaptics: split wakeup gesture types, cleanup and unify gesture codes with other devices (custom only)
defconfig: disable CONFIG_NUBIA_LCD_BACKLIGHT_CURVE (custom only)
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including stock based ones).
Meaning, if using anything besides stock don't bother posting about it.
I am only interested on debugging stuff in stock international (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
Man I'd like to try this. Still don't fully understand the process. I did a little messing around with my gs7 edge. Although it was pretty simple. Literally just flashed a custom stock rom with Odin and had SuperSU built it with rom controls and a simple tar img to flash to root and rom control easy unroot button. Was first time I was had a phone I could do something with. New territory for me. Will have to tread lightly lol.
Sent from my nubia Red Magic using XDA Labs
anyone of you have the stock android rom from this phone?
javier211086 said:
anyone of you have the stock android rom from this phone?
Click to expand...
Click to collapse
I have International Stock Rom with Play Store
blu_spark r31
All right crew!
New build is up :highfive:
Also checkout latest recommended blu_spark extras with blu_twrp v8.82
blu_spark_r31-redmagic_a9af12f.zip
blu_spark_r31-redmagic-custom_aa4e2d6.zip
proc: cmdline: remove additional nubia flags (fixes Magisk root factory reset on the Red Magic)
wireguard updates (v0.0.20180718)
Anykernel2 updates
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including stock based ones).
Meaning, if using anything besides stock don't bother posting about it.
I am only interested on debugging stuff in stock international (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
blu_spark extras v8.83
All right crew!
Here's an updated TWRP with all the blu_spark goodies inside and fully synced with TWRP Android-8.1 branch (including more recent upstream than official TWRP) and some specific device fixes.
Fully synced with TWRP 3.2.3+, name changing to reflect base 8.version. decryption, backup & restore, MTP, USB OTG and other basic stuff are working.
Delete your twrp settings or else issues may arise if coming from other version besides blu_spark.
twrp-3.2.3-x_blu_spark_v8.83_redmagic.img
build: TWRP 3.2.3-x | blu_spark v8.83
enable md5sum digest verification
Fix installing OTAs without decrypting
Fix ld.config.txt errors on Android 8.1 system root devices
language: italian: Fix SELinux support label
android: release 8.1.0_r40
Device specific changes here
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Wakelock blocker info and example script
I'm just sharing my personal mods since people asked, meaning no support will be given (don't bother post about it).
If your cat get's on fire you're on your own ;p
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
blu_spark r34
All right crew!
New build is up :highfive:
Also checkout latest recommended blu_spark extras with blu_twrp v8.83
blu_spark_r34-redmagic_a137be0.zip
blu_spark_r34-redmagic-custom_56e7374.zip
drivers: misc: implement usb fast charge mode
wireguard updates (v0.0.20180809)
Anykernel2 updates
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including stock based ones).
Meaning, if using anything besides stock don't bother posting about it.
I am only interested on debugging stuff in stock international (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
blu_spark extras v9.85
All right crew!
Here's an updated TWRP with all the blu_spark goodies inside and fully synced with TWRP Android-9.0 branch (including more recent upstream than official TWRP) and some specific device fixes.
Fully synced with TWRP 3.2.3+, name changing to reflect base 9.version, full compatible with upcoming Pie & current Oreo stuff.
Delete your twrp settings or else issues may arise if coming from other version besides blu_spark.
twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
build: TWRP 3.2.3-x | blu_spark v9.85
Fix header file for property_get
Decrypt FBE on 9.0 (backwards compatible)
Merge AOSP android-9.0.0_r3
Device specific changes here
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Wakelock blocker info and example script
I'm just sharing my personal mods since people asked, meaning no support will be given (don't bother post about it).
If your cat get's on fire you're on your own ;p
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
blu_spark r36
All right crew!
New build is up :highfive:
Also checkout latest recommended blu_spark extras with blu_twrp v9.85
blu_spark_r36-redmagic_c5448b3.zip
blu_spark_r36-redmagic-custom_cf0b45f.zip
build: use new and improved blu_gcc-8.2.0
makefile: supress some gcc-8 warnings
Makefile: Set KBUILD_OUTPUT to out by default
wireguard updates (v0.0.20180904)
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including stock based ones).
Meaning, if using anything besides stock don't bother posting about it.
I am only interested on debugging stuff in stock international (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
eng.stk said:
All right crew!
New build is up :highfive:
Also checkout latest recommended blu_spark extras with blu_twrp v9.85
blu_spark_r36-redmagic_c5448b3.zip
blu_spark_r36-redmagic-custom_cf0b45f.zip
Keep it real, keep it true, keep it blu :highfive:
Click to expand...
Click to collapse
Thanks for your work. Can I use blu_spark_r36-redmagic_c5448b3.zip with stock rom NX609J-global-v109?
tlgod said:
Thanks for your work. Can I use blu_spark_r36-redmagic_c5448b3.zip with stock rom NX609J-global-v109?
Click to expand...
Click to collapse
Sure, should work fine
Sent from my blu_spark'd OP6
Hi eng.stk
Firstly thanks for your great work, i'm using ur TWRP Blue Spark since release., i'm sure its the best recovery for nubia.
I'm using ominirom, and loving it.
I just wanna know if i can install your kernel on omini rom.
Have someone tested?
unegro said:
Hi eng.stk
Firstly thanks for your great work, i'm using ur TWRP Blue Spark since release., i'm sure its the best recovery for nubia.
I'm using ominirom, and loving it.
I just wanna know if i can install your kernel on omini rom.
Have someone tested?
Click to expand...
Click to collapse
Yes tou can, custom build will work on omni 8.1
Sent from my blu_spark'd OP6
eng.stk said:
Yes tou can, custom build will work on omni 8.1
Sent from my blu_spark'd OP6
Click to expand...
Click to collapse
Flashed blu_spark_r36-redmagic-custom_cf0b45f.zip on ominirom....
Testing it now, thanks.
Hello @eng.stk
We have a common friend that shipped me his nubia. Martinusbe aka the Grumpy Clown it is lol.
I'd like to try to continue his work on red magic with GZR roms but i have a weird issue on it 1st of all...the damn bootloader keeps relocking itself on his own, even after flashing twrp and omni on it.
I know they shipped as tarball the kernel but well...i'll try as well.
Any way to contact you in pm on telegram hangouts or something please? ...to avoid an off topic here.
Thx.
Regards.
Sent from my Poco F1 using Tapatalk
Alx31 said:
Hello @eng.stk
We have a common friend that shipped me his nubia. Martinusbe aka the Grumpy Clown it is lol.
I'd like to try to continue his work on red magic with GZR roms but i have a weird issue on it 1st of all...the damn bootloader keeps relocking itself on his own, even after flashing twrp and omni on it.
I know they shipped as tarball the kernel but well...i'll try as well.
Any way to contact you in pm on telegram hangouts or something please? ...to avoid an off topic here.
Thx.
Regards.
Sent from my Poco F1 using Tapatalk
Click to expand...
Click to collapse
Hit me on tapatalk chat mate, no prob.
Sent from my blu_spark'd Oneplus 6
@eng.stk I know you stopped working on this device long ago since Max stopped making OMNi i guess! i have tried to take someone on-board for development. I was even ready for donating like 5 from my side. NUBIA ditched the international users on Oreo update. even the security patch is october 2018. They gave a update in china for pie. But there are deaf and silent on the pie international updates. The GSI are riddled with sounds issues are there no one who picks this device. Phh is busy man. Even with logs i tried to help him. But he can't. I hope this device is still lying somewhere with you. Can you share and point someone who can start development for this device like lineageOs or something like that. Because Alex's phone doesn't work somehow with anything he tried. So there are no updates from his side. Its not like i have tried to make ROM. I have burnt my laptop motherboard while trying to make ROM. Max said this device killed his two sim cards so he is not willing to work onto this device. I had asked a lot of people in my own country to work onto it. But no one came forward as i said when i tried with money also. Paypal don't work with my bank account. That's the irony and i don't know anyone who can do this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Powered by Ubuntu 18.04.3 x86_64 (sparky VPS @ www.servercore.com.br - thanks @ChristianLetti)
Build with custom toolchain blu_gcc-9.2.0 (cortex-a75.cortex-a55 targeted, build with latest Crosstool-NG from GCC-9.2.0 snapshot)
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish OP6T builds based on OnePlusOSS/android_kernel_oneplus_sdm845
Systemless installer (doesn't touch system partition, OTA friendly), AnyKernel2 backend (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes
Several CPU Governors (blu_schedutil modded governor merged from latest Pixel 3 patchset)
No OC, use 300HZ kernel timer frequency
msm_performance touchboost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default), Network tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, advanced filesystems (F2FS, ExFAT, NTFS, CIFS & NFS)
Patched SafetyNet flags to pass CTS
Stock thermal driver by default
ZRAM Swap (LZ4) and adaptive LMK on by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and reworked GPU driver
adrenoboost enable by default at medium
KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
KLAPSE support (v5.0)
USB Fast Charge (USB mode up to 900mA with MTP on)
FS fsync toggle on/off
Wakelock blockers available
wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
Compatible with Kernel Adiutor, EXKM, FKM and others
DOWNLOAD KERNEL ZIPExtras download location(No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
OnePlus 6T development unit donated by OnePlus. Big shouts to them
Very proud of being on the OnePlus Developer Program, special thanks to Manu J. for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for OnePlus 6T, Kernel for the OnePlus 6T
Contributors
eng.stk
Source Code: https://github.com/engstk/op6
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r103 unified
Stable Release Date: 2019-09-27
Current Beta Version: r108 unified
Beta Release Date: 2019-10-25
Created 2018-10-31
Last Updated 2019-10-25
blu_spark r51 unified
Your favorite kernel for Oneplus devices is here :victory:
I merged in OOS 9.0.4 source drop, so I decided to push OP6/6Tunified beta build (untested, don't have 6T device atm).
Just got on 6T
If you're brave enough, details and downloads here (backup your boot.img so you can go back to stock):
https://forum.xda-developers.com/showpost.php?p=78027996&postcount=963
eng.stk said:
Your favorite kernel for Oneplus devices is here :victory:
I merged in OOS 9.0.4 source drop, so I decided to push OP6/6Tunified beta build (untested, don't have 6T device atm)
If you're brave enough, details and downloads here (backup your boot.img so you can go back to stock):
https://forum.xda-developers.com/showpost.php?p=78027996&postcount=963
Click to expand...
Click to collapse
1st
Best op6 kernel is already available for 6t ?
There is not even a TWRP to flash the kernel and you already made the kernel. Nice work :good: :highfive:
@eng.stk: Thank you buddy for your continued support, we are proud to have you on the developer team
I am suppose to get a device within next 48 hours so i will flash and report.
Keep up the good work.
marf28101995 said:
1st
Best op6 kernel is already available for 6t
Click to expand...
Click to collapse
Bam! Always on the #fastlane
Kir3 said:
There is not even a TWRP to flash the kernel and you already made the kernel. Nice work :good: :highfive:
Click to expand...
Click to collapse
Indeed xD You can try to temp fastboot boot my blu_twrp, maybe it will work.
Funk Wizard said:
@eng.stk: Thank you buddy for your continued support, we are proud to have you on the developer team
I am suppose to get a device within next 48 hours so i will flash and report.
Keep up the good work.
Click to expand...
Click to collapse
Thanks for the kind words my friend. Wouldn't be as much without your support
Yeah test it out and let me know!
OMG its awesome to see u here this soon
That was fastttttt, custom kernel served even before we are seated at the custom recovery table.
My device should be delivered tomorrow.
Its going to be Blusparked ASAP. Switching from oneplus 5T to 6T
I have twrp on my OP6T, but decryption doesn't work so i cant restore my backup. ill try and flash when i fixed that.
How did you get twrp?
meljohnsony2k said:
How did you get twrp?
Click to expand...
Click to collapse
He used OP6 twrp see his tuto in Guide News Discussions section
mingo_mgx said:
I have twrp on my OP6T, but decryption doesn't work so i cant restore my backup. ill try and flash when i fixed that.
Click to expand...
Click to collapse
So to be clear, does the twrp work when no screen lock is set ? Cant test anything as the 6T is yet to be delivered
saiprasadgawde said:
So to be clear, does the twrp work when no screen lock is set ? Cant test anything as the 6T is yet to be delivered
Click to expand...
Click to collapse
TWRP works but decryption does not, regardless of whether screen lock is disabled or not.
I want to try this kernel but a bit too risky at the mo as we have no way to restore a backup and there are no factory images available as yet.
iaTa said:
TWRP works but decryption does not, regardless of whether screen lock is disabled or not.
I want to try this kernel but a bit too risky at the mo as we have no way to restore a backup and there are no factory images available as yet.
Click to expand...
Click to collapse
Oh i see. It is risky no doubt but I am sure it wont be long before working TWRP will be out. Fingers crossed
@eng.stk: Look what's Rocking my Fajita :laugh:
Kernel boots fine, everything works, nothing broken. Used Enchilada 9.86 TWRP, boots fine but has decryption issues so had to sideload the kernel. Thank you once again for your continued support and i look forward to a fully compatible TWRP :highfive:
Edit: Temporary Workaround till we get a fully compatible Blu TWRP :laugh:
Brave! Nice work from all around though
EDIT: Kernel working fine here too!
Funk Wizard said:
@eng.stk: Look what's Rocking my Fajita :laugh:
Kernel boots fine, everything works, nothing broken. Used Enchilada 9.86 TWRP, boots fine but has decryption issues so had to sideload the kernel. Thank you once again for your continued support and i look forward to a fully compatible TWRP :highfive:
Click to expand...
Click to collapse
Oh yeah, awesome stuff my friend, really happy it's all good :highfive:
Seems this phone doesn't have notification light. Does this solve in this kernel as mentioned.
Sent from my [device_name] using XDA-Developers Legacy app
aniesh1114 said:
Seems this phone doesn't have notification light. Does this solve in this kernel as mentioned.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
No it will not add a LED to your phone... it's just a placeholder from the OP6.
Finally rooted and Blusparked my 6T through adb sideload on temporary recovery :laugh:
Device definitely feels more fluid and responsive as expected. The customised vibration is a wonderful addition.
Thanks eng.stk, great work as always
saiprasadgawde said:
Finally rooted and Blusparked my 6T through adb sideload on temporary recovery :laugh:
Device definitely feels more fluid and responsive as expected. The customised vibration is a wonderful addition.
Thanks eng.stk, great work as always
Click to expand...
Click to collapse
Great, but you should hide your IMEI