Can't flash at all - X2 Q&A, Help & Troubleshooting

Hi all please help me
I am stuck with Nokia X2 with boot logo
I tried flashing through NCS but says process failed code-1
Also tried QFIL not even recognises
When i boot it in bootloader mode
I can see it in device manager as Nokia bootloader interface
But non of methods working at all i cant flas it can't boot it in recovery
Plzzzzzzzz help

Help needed....

@frozen tears

Related

Hard bricked cant access fastboot or twrp and bootloop

Hello everyone
i have hard bricked my phone i have installed Elite rom for my nem-l21 and it was going perfectly, and i have made backup of my stock system but after booting it up it goes into bootloop and Huwawei eRecovery comes in, i cant access fastboot or twrp by button press only Huwawei eRecowery. I tried install stock rom by update.app but it is not compatible. My PC sees my phone when is off as NEM-21 in device manager but it isnt showing up on adb devices neither on fastboot devices. Please help because i have no idea how i can fix it. :crying:
I have unlocked bootloader and FRP
carlos0305 said:
Hello everyone
i have hard bricked my phone i have installed Elite rom for my nem-l21 and it was going perfectly, and i have made backup of my stock system but after booting it up it goes into bootloop and Huwawei eRecovery comes in, i cant access fastboot or twrp by button press only Huwawei eRecowery. I tried install stock rom by update.app but it is not compatible. My PC sees my phone when is off as NEM-21 in device manager but it isnt showing up on adb devices neither on fastboot devices. Please help because i have no idea how i can fix it. :crying:
I have unlocked bootloader and FRP
Click to expand...
Click to collapse
Hi
If the eRecovery works
flash build number cxxxb100
carlos0305 said:
Hello everyone
i have hard bricked my phone i have installed Elite rom for my nem-l21 and it was going perfectly, and i have made backup of my stock system but after booting it up it goes into bootloop and Huwawei eRecovery comes in, i cant access fastboot or twrp by button press only Huwawei eRecowery. I tried install stock rom by update.app but it is not compatible. My PC sees my phone when is off as NEM-21 in device manager but it isnt showing up on adb devices neither on fastboot devices. Please help because i have no idea how i can fix it. :crying:
I have unlocked bootloader and FRP
Click to expand...
Click to collapse
Try to use the Multi-Tool for team MT,maybe it will help you to unbrick your phone,i`ve used yesterday to unbrick a Honor 5C NEM-L21.You will need the update.zip for you phone and Huawei Update Extractor.
Or try DC Phoenix

Please help me purchased 15Euro DCPhoenix

Thread Closed
tell what you did, to brick phone.
what android version was before, what android wersion you tried to instal, what recovery you used. ?
oh, but if fastboot isnt working, you more or less are done. if im correct, even dc phoenix use fastboot..
"Step 1
Write compatible UPDATE.APP file in fastboot with DC Phoenix"
Arnys said:
tell what you did, to brick phone.
what android version was before, what android wersion you tried to instal, what recovery you used. ?
oh, but if fastboot isnt working, you more or less are done. if im correct, even dc phoenix use fastboot..
"Step 1
Write compatible UPDATE.APP file in fastboot with DC Phoenix"
Click to expand...
Click to collapse
i just use the SRKTool Lod Chan and try to unlocked the bootloader
and it success , after that i proceed to replace recovery with TWRP
but doesn't work . afterwards i bring back to re-lock bootloader
then the phone reboot . the phone stuck at android boot logo
no recovery no fastboot cannot identify even in PC
but when the phone gets drain and i plugged the charger on it
the phone reboots directly into the system or its OS
but when i try to power it off again ( reboot )
the same thing happen it will stuck in the boot logo
until the battery dries again ,.
i never upgrade to Nougat so my phone still in Marshmallow version
thank you .
vinfrix said:
i just use the SRKTool Lod Chan and try to unlocked the bootloader
and it success , after that i proceed to replace recovery with TWRP
but doesn't work . afterwards i bring back to re-lock bootloader
then the phone reboot . the phone stuck at android boot logo
no recovery no fastboot cannot identify even in PC
but when the phone gets drain and i plugged the charger on it
the phone reboots directly into the system or its OS
but when i try to power it off again ( reboot )
the same thing happen it will stuck in the boot logo
until the battery dries again ,.
i never upgrade to Nougat so my phone still in Marshmallow version
thank you .
Click to expand...
Click to collapse
what wersion of twrp ? link. there are MM and N versions, and, if you on MM put N version twrp, you will brick phone.. and, even with dead battery i was able to enter fastboot, when i instaled wrong twrp. but for me solution was simple, instal right twrp and all was good (ofcorse if you didnt delete system)
i can't remember the version but im sure it all arounds in 2.1...something
no i wasn't load the Nougat version because i know i am MM the only thing i remember is the TWRP i load is from SRKTool Lod Chong there was an option there to install twrp recovery
can i be able to enter the fastboot ?
if i can go over to fastboot i can repair this
but i can't go fastboot
volume rocker technique doesn't work
even using adb reboot bootloader too
when i am doing volume down ( hold )
the phone only vibrates then stuck at logo
even when its connected to adb command
when the phone reboot it stuck at the logo
can't go to fastboot ?
is there any way of forced
reflash the boot.img & recovery.img?
Hi, i have P9 L19 with C432 B210 i want to update do Android 7, but mistakely put wrong UPDATE to phone memory. Now I'm stucked at Huawei logo and cant turn off device.
Only I can get to Fastboot&Rescue Mode. After press all three buttons nothing happened, phone juest restarts and stuck at logo. I tried put right UPDATE to SD card but no luck
Bootloader: locked
FRP: locked
debbuging: off
Please help me.
no one knows how to fix our problem so sad
Please close the thread
problem issue solved!
please help me same problem as you...
JCB117 said:
please help me same problem as you...
Click to expand...
Click to collapse
Easily Unbrick Your Phone via this method
https://forum.xda-developers.com/p9/help/huawei-p9-brick-easiest-to-unbrick-t3662350

Xiaomi Mi 5x Bricked, Need help.

Hello, today I tried to install a custom rom on my xiaomi mi5x, so I unloocked the bootloader and installed twrp, than I installed the android one rom .The problem was that I had to verify my gmail because it got locked, so I looked up a way to bypass that lock. I followed a youtube video on how to bypass that lock on android one, and now my phone has the following issue:
After booting I only see the MI logo for about a second, than it goes into black screen, same thing happens when I try to boot to recovery.
The only thing that works is fastboot.
Please help me!
Go into fastboot and write following command:
fastboot boot twrp.img
Click to expand...
Click to collapse
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
SoNhater said:
Go into fastboot and write following command:
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
Click to expand...
Click to collapse
hi sir, i am facing also the same problem. and in my case every time i tried that code here is the output
FAILED (remote: unlock device to use this command)
i know that i already unlocked this before.
I would recommend that you flash the official firmware (fastboot version). Please follow the instructions here http://en.miui.com/a-234.html.
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
eman78 said:
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Click to expand...
Click to collapse
Have you find a solution sir ?
I already have tried to flash in EDL mode but when the flashing is done the phone did not reboot, plugged in the charger, and connected to the computer only received
qualcomm Hs-usb Diagnostics 900e​

Moto e4 plus TWRP bootloop

hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
swapnil-15 said:
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
Click to expand...
Click to collapse
Sounds like ya accidentally flashed the recovery to boot partition
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
bcrichster said:
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
Click to expand...
Click to collapse
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
I dunno about any SP flash tool, I used the minimal ADB fastboot..
Running some Xper!meπts from my Moto E (4) Plus
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
same happened here looking for a solution .. worked 2 times and on both got stuck on "editing partition details"while wiping data.. first time worked and pressing holding the power button restarted and flashed again twrp and worked. 2nd time it went in twrp boot loop. :/
any solutions to our same problem ??????
I have also the same problem with my device Bluboo-S1 and TWRP v3.2.1 without solution
Use TWRP v3.1.1-0 for wiping encryption, upgrade TWRP after ya get your ROM booting. Some ppl are reporting success via booting from TWRP to bootloader, then hitting START.. Not all devices are doing this tho, you may have that rare one which requires it..
koop1955 said:
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
Click to expand...
Click to collapse
The link you have given is for Owens not for Nicklaus.
Mine is Moto e4 plus (xt1770). So the main point is can i use this method for Nicklaus (xt1770)
Please help me I'm stucked in twrp boot loop :crying::crying:
How did u solve the problem? coz the same thing happened with me right now, if you have any solution then plz tell me.
my moto e4 plus is stuck on orange screen after flashing twrp
my moto e4 stuck on orange state showing message "orange state device cannot be trusted ,you device will boot in 5 sec" and it stuck on boot loop.
this problem occured when i flashed twrp into my phone.i reboot the device then it goes to orange state.after that i cant able to boot the boot loader.
i cant able to boot into bootloader or fastboot mode..
please help me.
How did you resolve this problem.
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
did you found any way to unbrick your phone? actually me too has this problem.

(help) Nokia 8 unlocked restart again

My Nokia 8 unlocked crictical I flashed gsi rom after flashing my Nokia 8 not booting bootloader warning
power by android logo and restart no recovery no download mode
please help me unlock bootloader on my nokia 8. i try fastboot but my computer sais that no device connected.
i try qfil flash tool but my device not recognize... it said no port..

Categories

Resources