Database Develop

[ODIN] J700T Nougat 7.1.1

https://www.androidfilehost.com/?fid=889964283620761169
Grabbed straight from SamMobile. Flash using Odin.

Not for j700t1 though, correct?

AngryManMLS said:
Grabbed straight from SamMobile. Flash using Odin.
Click to expand...
Click to collapse
But how do you root after flashing this Nougat in J700T?

deloj said:
But how do you root after flashing this Nougat in J700T?
Click to expand...
Click to collapse
There's all sorts of knowledge in the thread
https://forum.xda-developers.com/galaxy-j7/j700t-development

Anything you see for the J700T is compatible with the J700T1. The phones are exactly the same minus 4 apps inside the system.
ctindell1981 said:
Not for j700t1 though, correct?
Click to expand...
Click to collapse

Is this Nougat stock rom for the samsung J700T? And how do I root it?

I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.

nimbus22 said:
I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.
Click to expand...
Click to collapse
There is no such rom for this model in nougat yet

nimbus22 said:
I have a J700T with twrp and root. Is there a nougat ROM that I can download and flash via twrp?
I would rather not go back to stock, flash nougat, and then re-root.
Click to expand...
Click to collapse
I'm writing this up in case anyone else needs help.
1) Couldn't get the 7.1.1 download to work from sammobile. Ended up downloading the firmware from another source and flashing through Odin. Took a couple of minutes to reboot after the flash.
2) Wanted to get TWRP and Root back on the phone and followed these instructions.
https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Now have twrp and root. Everything seems to be working fine.

nimbus22 said:
I'm writing this up in case anyone else needs help.
1) Couldn't get the 7.1.1 download to work from sammobile. Ended up downloading the firmware from another source and flashing through Odin. Took a couple of minutes to reboot after the flash.
2) Wanted to get TWRP and Root back on the phone and followed these instructions.
https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Now have twrp and root. Everything seems to be working fine.
Click to expand...
Click to collapse
followed the steps on the thread. can't make it work. always getting stuck at tmobile logo
here are the steps i used.
1. flash firmware through odin
2. flash twrp through odin
3. flash supersu through twrp
4. flash dm-verify.zip through twrp
5. stuck on tmobile logo.
any ideas?

Once it's been on the screen saying t mobile for at least 10 mins, pull battery, boot to stock recovery, mount system, factory reset, reboot. There. Now u will hear t mobile jingle and it will reach set up wiz

nikkosaurus said:
followed the steps on the thread. can't make it work. always getting stuck at tmobile logo
here are the steps i used.
1. flash firmware through odin
2. flash twrp through odin
3. flash supersu through twrp
4. flash dm-verify.zip through twrp
5. stuck on tmobile logo.
any ideas?
Click to expand...
Click to collapse
I flashed supersu after the dm verity had no problems

benny3 said:
I flashed supersu after the dm verity had no problems
Click to expand...
Click to collapse
Which TWRP version is people using?

https://forum.xda-developers.com/ga...ecovery-galaxy-j7-sm-j700t-t1-t3560342/page30
Same as mm

Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed

uklele1234 said:
Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed
Click to expand...
Click to collapse
Yes, it does
.

uklele1234 said:
Does anyone know if Xposed works on it yet? Wanting to update but don't want to lose Xposed
Click to expand...
Click to collapse
I would recommend using the magisk modified Xposed installer from the magisk stable threads, and install Xposed via magisk. The other xposed doesn't work as well, it says some modules are installed and running, but actually not doing anything. Just a heads up
hightech316 said:
Yes, it does
.
Click to expand...
Click to collapse

fullofhell said:
I would recommend using the magisk modified Xposed installer from the magisk stable threads, and install Xposed via magisk. The other xposed doesn't work as well, it says some modules are installed and running, but actually not doing anything. Just a heads up
Click to expand...
Click to collapse
How strange for me the official xposed works better than the Magisk version, the Magisk version makes my phone restart when I try to rotate the screen.

carlosbalbuena_ said:
How strange for me the official xposed works better than the Magisk version, the Magisk version makes my phone restart when I try to rotate the screen.
Click to expand...
Click to collapse
That is bizarre. I tried official first and nothing would activate

fullofhell said:
That is bizarre. I tried official first and nothing would activate
Click to expand...
Click to collapse
I have all these modules active and it works perfectly

Oreo TWRP Backup needed

Hello
I have bricked my p10. I think backup from working device would be fix it. Probably a lot of people use emui 8 so. I need help
Someone Can upload? I tried really everything

I can try backup from nougat as well, someone could help me with this guys?
Please.

no nothing yet, you can try kingroot and flashify.

ure3808 said:
no nothing yet, you can try kingroot and flashify.
Click to expand...
Click to collapse
I'm rooted, i've got recovery. Now i'm without OS and nothing work.
It's possible to remove and recreate partitions? i cant flash nougat, cuz partitions like... "recovery" "boot" doesn't exist( in oreo boot.img = ramdisk.img, recovery.img = recovery_ramdisk.img) ehh

Did you try this?
If TWRP works than this should work, too.
When you're on Oreo use Tutorial #2.

Jannomag said:
Did you try this?
If TWRP works than this should work, too.
When you're on Oreo use Tutorial #2.
Click to expand...
Click to collapse
Yes, I tried this few days ago..
Tap on oreoupdate.zip and install it.
Click to expand...
Click to collapse
I clicked this file, looked like it was supposed to be installed but I knew the phone has been rebooted too fast.. and I was right, after reboot didn't install update from eRecovery, just start twrp and that's all..

You need Update.APP 8.0.0.360 decompile, use 3 img files, boot, system, vendor, and use fastboot commands.

I said, i tried many methods and no one was good. I flash correct .IMG's via fastboot ( by information from cmd of course ). After flash i reboot to recovery( twrp) and I saw, in partition /system takes some GB so i tried to boot normally but still didn't work, 1st information after reboot - "DEVICE IS NOT TRUSTED" or something like that ( cuz bootloader is unlocked ) after few seconds, system should boot, but it's stuck for while on 1st screen like I said, and then did reboot to eRecovery so..

It's possible to damage bootloader as much.. ?

Upgrading without un-rooting OP3T

I am upgrading my OP3T from 5.0.1 to 5.0.3. My device is rooted using magisk and I have TWRP installed.
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?
EDIT - I read about Dirty flashing the version I want but I can't find 5.0.3 image on Oneplus website.

shantam2 said:
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?.
Click to expand...
Click to collapse
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).

przemcio510 said:
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
Click to expand...
Click to collapse
Re-flashing magisk via TWRP will keep my data ?

It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0

RASTAVIPER said:
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
Click to expand...
Click to collapse
Can you elaborate more on this ?
After I upgrade (and it becomes unrooted). I immediately flash magisk via TWRP ?
I didn't get the part "flash the whole rom and don't exit" ?
Also, Will I lose any data in the process ?

shantam2 said:
Re-flashing magisk via TWRP will keep my data ?
Click to expand...
Click to collapse
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.

przemcio510 said:
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
Click to expand...
Click to collapse
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?

b4bass said:
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
Click to expand...
Click to collapse
If you flash the update downloaded as zip from downloads.oneplus.com via TWRP, then no, there will be no need to flash it again via fastboot and no need to install TWRP Manager.
Boot to TWRP
Flash 5.0.3 zip
Flash Magisk
Reboot & enjoy

OK thanks! I thought the recovery would go back to stock after flashing the rom

And guys, if other members help you with their posts, don't forget to thank them.
Unleashed by my rooted OP3T on 8.0

b4bass said:
OK thanks! I thought the recovery would go back to stock after flashing the rom
Click to expand...
Click to collapse
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs

BillGoss said:
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
So magisk is patching bootloader? I thought it was it point not to
Though this method is saving me some serious time!

b4bass said:
So magisk is patching boot, I thought I was it point not to
Though this method is saving me some serious time!
Click to expand...
Click to collapse
Magisk makes a point of not touching the system partition but a lot of its magic is done by changing the boot image.
Sent from my OnePlus3T using XDA Labs

OK thx ! First time I replaced supersu to pet magisk. Will have to find more details on this subject

b4bass said:
So magisk is patching bootloader? I thought it was it point not to
Click to expand...
Click to collapse
Boot image is kernel and ramdisk. Boot image is not the same as bootloader!

Manual update rooted P10?

Hello,
Some weeks ago I have rooted my P10 with magisk (and twrp as recovery). Now I hot update Infos for new fw B371 (C432). Ota update won't work so I downloaded full Ota with huawei firmware finder. After download phone restarts but no update. It boots to recovery. Do I have to install the update files manually or isn't an update possible.
Thanks

painkiller_one said:
Hello,
Some weeks ago I have rooted my P10 with magisk (and twrp as recovery). Now I hot update Infos for new fw B371 (C432). Ota update won't work so I downloaded full Ota with huawei firmware finder. After download phone restarts but no update. It boots to recovery. Do I have to install the update files manually or isn't an update possible.
Thanks
Click to expand...
Click to collapse
Just flash a stock oreo recovery, and you should be fine.

Use my guide. Tutorial #3 is the right one.
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286

Thanks. So root will be undone with this process? After this I can easily install twrp and magisk again without any problems?
Edit: Testet this, but install of officialupdate.zip failed (put the directory in /cust - boot into TWRP, mount cust and tried to install officialupdate.zip). Install from sdcard won´t work too.

Anyone has a solution to fix this. Removed root but it won't work.

Please post the TWRP log after trying to install officialupdate.zip. I need to know, what's failing so I'm able to help you out.

Jannomag said:
Please post the TWRP log after trying to install officialupdate.zip. I need to know, what's failing so I'm able to help you out.
Click to expand...
Click to collapse
Tried the root method (install from /cust directory) but again error. And here is the log from TWRP:
https://pastebin.com/1EL41MV5
Hope it is ok with pastebin link?
Thanx

painkiller_one said:
Tried the root method (install from /cust directory) but again error. And here is the log from TWRP:
https://pastebin.com/1EL41MV5
Hope it is ok with pastebin link?
Thanx
Click to expand...
Click to collapse
Okay, I can't figure it out, the log says error in line 141 in my script. I tried this on my phone and there's no such error.
What this script does is quiet simple - it just flashes a modified EMUI recovery, where the file and online check are disabled. So, you can flash the recovery from the archive manually via fastboot with "fastboot flash recovery_ramdisk PATH\TO\RECOVERY.IMG".
Then restart and do the update via Settings or FF.
After this you need to reroot, so reinstall TWRP and Magisk / SuperSU.

Jannomag said:
Okay, I can't figure it out, the log says error in line 141 in my script. I tried this on my phone and there's no such error.
What this script does is quiet simple - it just flashes a modified EMUI recovery, where the file and online check are disabled. So, you can flash the recovery from the archive manually via fastboot with "fastboot flash recovery_ramdisk PATH\TO\RECOVERY.IMG".
Then restart and do the update via Settings or FF.
After this you need to reroot, so reinstall TWRP and Magisk / SuperSU.
Click to expand...
Click to collapse
Ok thanks for looking. Don´t know why it won´t work. Device was simply rooted with TWRP + Magisk. Ok will try out manual way. Wiht Archive you mean this: https://forum.xda-developers.com/p10/development/recovery-p10-vtr-l09-t3782163 ?

painkiller_one said:
Ok thanks for looking. Don´t know why it won´t work. Device was simply rooted with TWRP + Magisk. Ok will try out manual way. Wiht Archive you mean this: https://forum.xda-developers.com/p10/development/recovery-p10-vtr-l09-t3782163 ?
Click to expand...
Click to collapse
No, my officialupdate rar achive, it contains the zip for TWRP and a recovery IMG file. This is the right one.

OK then you mean the VTR_RECOVERY_OREO-NoCheck.img. I will check this. Thanks

Jannomag said:
No, my officialupdate rar achive, it contains the zip for TWRP and a recovery IMG file. This is the right one.
Click to expand...
Click to collapse
Update worked only via Firmware Finder. But all is fine now. Reinstalled TWRP and magisk (no data loss) and all is working. Thanks for your help.

painkiller_one said:
Update worked only via Firmware Finder. But all is fine now. Reinstalled TWRP and magisk (no data loss) and all is working. Thanks for your help.
Click to expand...
Click to collapse
Would you mind sharing the steps you took to make it work?
I'm travelling abroad and keep getting the update reminder, and I'm too afraid to get an unusable phone to try anything

Broken camera. Bootloader unlocked on .202

I unlocked bootloader on Pie, .202 fw.
My camera preview is broken but I can take pictures.
Unable to find any fix for this. Isn't camera suposed to work when unlocking on pie?

Mustach said:
I unlocked bootloader on Pie, .202 fw.
My camera preview is broken but I can take pictures.
Unable to find any fix for this. Isn't camera suposed to work when unlocking on pie?
Click to expand...
Click to collapse
Are you sure you unlocked the bootloader on PIE .202?
BTW.
You could try the twrp camerafix together with the vbmeta parameters.

MartinX3 said:
Are you sure you unlocked the bootloader on PIE .202?
BTW.
You could try the twrp camerafix together with the vbmeta parameters.
Click to expand...
Click to collapse
100% I did. I tried camera fixes for twrp, also I tried magisk modules that are supposed to fix it. Nothing happened.
As it goes for the vbmeta parameters. I did change the parameters when flashing twrp. Maybe I did something wrong. I have no idea. 1st time rooting a Sony. Had one plus and huawei before.
Just to make sure. Can ypu point me to the right camera fix twrp zip and tell me wxactly what to do with vbmeta in case I did it wrong.
Thanks in advance man. Love your work.

Mustach said:
100% I did. I tried camera fixes for twrp, also I tried magisk modules that are supposed to fix it. Nothing happened.
As it goes for the vbmeta parameters. I did change the parameters when flashing twrp. Maybe I did something wrong. I have no idea. 1st time rooting a Sony. Had one plus and huawei before.
Just to make sure. Can ypu point me to the right camera fix twrp zip and tell me wxactly what to do with vbmeta in case I did it wrong.
Thanks in advance man. Love your work.
Click to expand...
Click to collapse
Thank you
Oh, just follow the TWRP instructions and everything is fine
And the camerafix is bundled in the twrp tar.gz file
Eerrm. Did you test the camera without the camerafix too?
Because since you unlocked it After .126 you should not need it and it should break your camera preview until you flash the vendor.sin via newflasher again.

MartinX3 said:
Thank you
Oh, just follow the TWRP instructions and everything is fine
And the camerafix is bundled in the twrp tar.gz file
Eerrm. Did you test the camera without the camerafix too?
Because since you unlocked it After .126 you should not need it and it should break your camera preview until you flash the vendor.sin via newflasher again.
Click to expand...
Click to collapse
Ok so now I flashed vendor with newflasher and rebooted, black camera preview. Then i went to change vbmeta parameters and flash camerafix, rebooted, Black preview. I don't even know what to do anymore.

Mustach said:
Ok so now I flashed vendor with newflasher and rebooted, black camera preview. Then i went to change vbmeta parameters and flash camerafix, rebooted, Black preview. I don't even know what to do anymore.
Click to expand...
Click to collapse
That's disgusting [emoji848]
Hmm, another approach would be to downgrade to Oreo and apply xperifix und a selinux permissive patch.

MartinX3 said:
That's disgusting [emoji848]
Hmm, another approach would be to downgrade to Oreo and apply xperifix und a selinux permissive patch.
Click to expand...
Click to collapse
Downgraded to oreo via flasher and I tried to install twrp. I install it. I flash magisk. and system won't boot. UGH.

Mustach said:
Downgraded to oreo via flasher and I tried to install twrp. I install it. I flash magisk. and system won't boot. UGH.
Click to expand...
Click to collapse
Did you wiped userdata?
(TWRP or userdata.sin)

MartinX3 said:
Did you wiped userdata?
(TWRP or userdata.sin)
Click to expand...
Click to collapse
yeah. keeps bootlooping on sony logo.

Mustach said:
yeah. keeps bootlooping on sony logo.
Click to expand...
Click to collapse
Did you use the OREO TWRP, the kernel installer.zip and the twrp installer.zip?

MartinX3 said:
Did you use the OREO TWRP, the kernel installer.zip and the twrp installer.zip?
Click to expand...
Click to collapse
yeah. forgot the kernel. Reinstalled the firmware, flashed twrp, kernel, and twrp.
Bootloops.
Turned it off. Tried to turn it on, now it says "Your device is corrupt. It can't be trusted and wont boot"
EDIT***
Cleared user data now that message is gone, but it still loops.

Mustach said:
yeah. forgot the kernel. Reinstalled the firmware, flashed twrp, kernel, and twrp.
Bootloops.
Turned it off. Tried to turn it on, now it says "Your device is corrupt. It can't be trusted and wont boot"
Click to expand...
Click to collapse
And did you flash magisk too?

MartinX3 said:
And did you flash magisk too?
Click to expand...
Click to collapse
Ofcourse

Mustach said:
Ofcourse
Click to expand...
Click to collapse
So you did exactly the steps in the instructions, full wiped your phone and used the kernel installer as first zip?

MartinX3 said:
So you did exactly the steps in the instructions, full wiped your phone and used the kernel installer as first zip?
Click to expand...
Click to collapse
hahah yes . stupid phone geez...

Mustach said:
hahah yes . stupid phone geez...
Click to expand...
Click to collapse
Hmmmm.
Does Oreo run without TWRP?
(And you didn't forget both vbmeta parameters?)

MartinX3 said:
Hmmmm.
Does Oreo run without TWRP?
(And you didn't forget both vbmeta parameters?)
Click to expand...
Click to collapse
it runs oreo without twrp. I didn't forget any parameters.
So I did th following:
Installed Oreo, booted it once to make sure it works.
flashed twrp.img
flashed vbmeta.img
rebooted to twrp.
flashed kernel, flashed twrp installer
rebooted to twrp.
flashed magisk.
reboot.
Bootloop.

Mustach said:
it runs oreo without twrp. I didn't forget any parameters.
So I did th following:
Installed Oreo, booted it once to make sure it works.
flashed twrp.img
flashed vbmeta.img
rebooted to twrp.
flashed kernel, flashed twrp installer
rebooted to twrp.
flashed magisk.
reboot.
Bootloop.
Click to expand...
Click to collapse
Hmmm, I am feeling lost.
Which device do you use?

MartinX3 said:
Hmmm, I am feeling lost.
Which device do you use?
Click to expand...
Click to collapse
XZ2 H8216

Mustach said:
XZ2 H8216
Click to expand...
Click to collapse
That's very weird, this device is confirmed to work. @Pandemic , do you have any clue?