Database Develop

[KERNEL]-[CM13/14]-[MM/N] [OFFICIAL] Remix Kernel [3G|LTE|DS] - [OC/UC/UV/OTG]

Features
Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers
Additional CPU hotplugs:
MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug
Additional Governors:
Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove
Additional I/O Schedulers:
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544
Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock
As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app
New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources
Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"
Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!
Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir
XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini
Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors
Version Information
Status: Stable
Created 2016-07-29
Last Updated 2017-05-21

Kernels for testing
attached below

Thanks bro!!!!

Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?

arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.

DarkFrenzy said:
Hi!
Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.
Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.
DOWNLOADS:
GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1
Click to expand...
Click to collapse
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:

o0chtm0o said:
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
Click to expand...
Click to collapse
hehe silly mistakes! thanks for that. your bliss is ready

http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.

arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
give me the boot.img

flipeicl said:
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
Click to expand...
Click to collapse
for GT-I9190 ???

DarkFrenzy said:
hehe silly mistakes! thanks for that. your bliss is ready
Click to expand...
Click to collapse
Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:

DarkFrenzy said:
for GT-I9190 ???
Click to expand...
Click to collapse
Sorry, it's for i9192.

flipeicl said:
Sorry, it's for i9192.
Click to expand...
Click to collapse
too late i uploaded it with GT-I9190 kernel. now removing.

cm13 stock (k2wl) boot image for i9192
rayzen6 said:
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
Click to expand...
Click to collapse
here is the boot.img as requested for cm13 stock build for i9192

arsm74 said:
here is the boot.img as requested for cm13 stock build for i9192
Click to expand...
Click to collapse
updated. check OP
(now going to sleep )

DarkFrenzy said:
updated. check OP
(now going to sleep )
Click to expand...
Click to collapse
Tks @DarkFrenzy...appreciate it

Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).
Thanks for your help and support!

o0chtm0o said:
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Thanks for your help and support!
EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish
Click to expand...
Click to collapse
i have already uploaded the bliss6.1 is that not latest ?

FM radio not working
DarkFrenzy said:
...
GT-I9192
....
CM13 KERNEL
....
Click to expand...
Click to collapse
A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!

@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195
Thanks again for your contribution

[KERNEL][MI5S][LOS14.1]CrazyAquaKernel v2 [4-9-17]

FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=209538
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the Xiaomi Mi 5s
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-xiaomi-sd820-sd821-los
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-24
Last Updated 2017-08-24

FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/24-08-17
- initial release
v2.0/4-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood

reserve1

reserve2

reserve3

First of all thanks for your efforts.
One question before I proceed, does this kernel need specific boot loader (like mm boot loader)? Does work on AOSP based rooms, like du, aex?

macwindows said:
First of all thanks for your efforts.
One question before I proceed, does this kernel need specific boot loader (like mm boot loader)? Does work on AOSP based rooms, like du, aex?
Click to expand...
Click to collapse
It work with every LOS based rom
Sent from my iPhone using Tapatalk Pro

Thanks for the kernel.
Did you have to do any changes to Lineage code base to get it to boot on Nougat bootloader?

Gingernut78 said:
Thanks for the kernel.
Did you have to do any changes to Lineage code base to get it to boot on Nougat bootloader?
Click to expand...
Click to collapse
Nah its just an updated los kernel with a few features,if the los rom work with your bootloader should work with my kernel too no need older bootloader i believe
Sent from my iPhone using Tapatalk Pro

CrazyGamerGR said:
Nah its just an updated los kernel with a few features,if the los rom work with your bootloader should work with my kernel too no need older bootloader i believe
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Gonna give a test.
I asked cause I was unable to get my kernel to boot with Lineage source code with modifications, only the necessary changes to get it to compile when building standalone.

Worked better then others on lastest RR. Thanks! DT2W works after flashing kernel and no bootloop.

what about miui version

nos1609 said:
Worked better then others on lastest RR. Thanks! DT2W works after flashing kernel and no bootloop.
Click to expand...
Click to collapse
Thx for feedback m8
Sent from my iPhone using Tapatalk Pro

zjy2200656 said:
what about miui version
Click to expand...
Click to collapse
Maybe soon m8
Sent from my iPhone using Tapatalk Pro

CrazyGamerGR said:
Maybe soon m8
Click to expand...
Click to collapse
Plz make the kernel for miui...! Thx

Addymore said:
Plz make the kernel for miui...! Thx
Click to expand...
Click to collapse
I will try soon m8
Sent from my iPhone using Tapatalk Pro

CrazyGamerGR said:
I will try soon m8
Click to expand...
Click to collapse
Thx for ur efforts....

Addymore said:
Thx for ur efforts....
Click to expand...
Click to collapse
Np m8 ^^
Sent from my iPhone using Tapatalk Pro

CrazyGamerGR said:
I will try soon m8
Click to expand...
Click to collapse
Thank you. There isn't any custom kernel for miui roms and there are several for non-miui roms.
Would be great to see oc, battery control, ntfs support etc on miui 9.
Thank you

CrazyGamerGR said:
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
thanks for your work ，can you add voltage contron

[KERNEL][TW][NOUGAT 7.0][SM-N935F] KimcilKernel-Galaxy Note FE-N935F

Hello Together,,finally this day is coming...!!!
This kernel is based on ARA1 Source and many feature in this kernel i taken from Galaxy S7 Superkernel Source build by @Tkkg1994 at this LINK, Many Thanks to him for allowing me use his source
if u want to take my work or need something please ask me first,otherwise u are not allowed to take it,thank you
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY,I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE AFTER FLASING ANY FILE FROM THIS THREAD!!
Features of this Kernel:
- Build with latest GNU GCC 6.4.1 optimized for cortex a53
- Build with BRD4 kernel source!
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative, zzmoove, barry_allen, nightmare, darkness, pegasusq, yankactive intelliactive, ondemandplus, intellimm, bioshock, lionheart, smartmax, smartass2, smartmax_eps, alucard, blu_active, cafactive, electrodemand, ondemand_x, hyper and intellidemand
- Built with latest ramdisk sources from samsung (BRD4)
- Frandom Support
- Gzip compressed ramdisk (supersu, magisk etc will work fine)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, maple and SIOplus
- UKSM (Ultra Kernel Samepage Merging)
- Zram can be set in synapse
- Gentle fair sleeper switch enabled
- StateNotifier included
- HTC's async added
- LED Control
- Charging control
- Full CPU/GPU control in synapse
- Many controllable wakelocks
- Underclock: big core to 312Mhz, little core to 338Mhz
- Overlock: depens on your ASV(grade c can be set to 2700 grade a phone max to 2800)
- GPU OC to 806 Mhz
- Init.d Support
- Wlan Wakelock decreased
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- Selinux is set to permissive
- Zen-Tune implemented
- All bad samsung drivers disabled (like tima or rkp)
- Force encryption disabled
- Knox faked to 0x0
- Boeffla wakelock control
- many more,im not remember anymore
Bugs/Problem:
-u can tell me
This Kernel already tested more than 1 week and and only tested in n935f also didnt give any error, but if u find a bug u can tell me with log.thanks
How to Install:
1. Install TWRP in your phone,check this LINK for more information
2. Follow the instructions on the page above, until you get a working recovery
3. Take all backup from your phone in TWRP, U can restore it if something goes wrong,
3. Download the Kernel from below and copy it to your Phone
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Flash supersu or magisk and all things that u have modify before in your kernel,otherwise u will stuck in twrp.
7. Wipe cache and dalvik cache (recommand)
8. Reboot
Credits/Thanks:
- @Tkkg1994
- Samsung for sources
- the great linus for his amazing kernel source
- @arter97
- @jesec (for the great fingerprint fix!!)
- @dorimanx
- @AndreiLux
- @halaskz
- @neobuddy83
- @UpInTheAir for his great Synapse implementation
- @djb77 for the toolchain
- @DarkLord1731
- @zrock
- also all dev that i have taken the commit..
- please tell me if i missing one.. thank you
Support:
You like My Work ??u can hit thanks button,..thank you..
XDAevDB Information
KimcilKernel, Kernel for the Samsung Galaxy Note Fe, SM-N935F
Contributors:
@jaran kepang
Source Code:
V1.0 source code
V2.0 source code
Version Information
Status: -
Current Stable Version: V2.0
Stable Release Date: -
Linux Kernel Version: 3.18.112
Created: 2018-04-25
Last Updated: 2018-06-23

DOWNLOAD
KimcilKernel-v1.0
KimcilKernel-v2.0
CHANGELOG
v1.0
- initial release
v2.0
- only build for oreo
- update linux kernel to 3.18.112
- same feature as nougat kernel
- remove synapse
- remove thunderplug hotplug driver
- ONLY FOR N935F.. KOREAN VERSION IS UNDER BUILD
- many more cant remember all
Thanks @djb77 for helping me build oreo kernel.
​Q and A
Q : What kernel manager should i use ?
A : This kernel already support synapse but u can use mtweak by @morogoku in s7 thread or use kernel auditor find in playstore
Q : -
A : -

Reserved​

Fantastic Work! First Kernel for the N935F!
Cheers and Keep up the good work.
Downloading now...!

JazonX said:
Fantastic Work! First Kernel for the N935F!
Cheers and Keep up the good work.
Downloading now...!
Click to expand...
Click to collapse
thank you bro..im waiting for feedback..???

thanks bro.. i can flash without format.. because i have already root and flash some other mode

n935k can install?

mr.mgmg said:
thanks bro.. i can flash without format.. because i have already root and flash some other mode
Click to expand...
Click to collapse
if u ask..then u only need to wipe dalvik cache..
Xepher97 said:
n935k can install?
Click to expand...
Click to collapse
i dont know..this is only tested on n935f..but if u want..u can try and give log if any error..

jaran kepang said:
if u ask..then u only need to wipe dalvik cache..
i dont know..this is only tested on n935f..but if u want..u can try and give log if any error..
Click to expand...
Click to collapse
the quick charge not work after flash the kernel
u can give me the stock kernel, because im not take backup by recovery

mr.mgmg said:
the quick charge not work after flash the kernel
u can give me the stock kernel, because im not take backup by recovery
Click to expand...
Click to collapse
what phone model do u have ??
fast charging is working fine..can u send me the screenshot.

jaran kepang said:
what phone model do u have ??
fast charging is working fine..can u send me the screenshot.
Click to expand...
Click to collapse
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877

mr.mgmg said:
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
Click to expand...
Click to collapse
working fine on my phone..are u wiping dalvik cache after install ??
what kernel manager are u use ??try looking in battery tab in kernel manager and give me screenshot.thanks

Woah great work bro!! Kernel with fully compatible with synapse
But wait wait wait.. 'kimcil' kernel???? What!?? Wkwkwk

Ha_Dua_O said:
Woah great work bro!! Kernel with fully compatible with synapse
But wait wait wait.. 'kimcil' kernel???? What!?? Wkwkwk
Click to expand...
Click to collapse
yes of course..u can find gpu thermal control only in synapse
...whats wrong with kimcil ???
lollllllllll...

mr.mgmg said:
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
Click to expand...
Click to collapse
waitt...
u mean u didnt flash kimcil kernel right ??
u flash kernel from that link ?

SM-N935K Android 8.0 Flash Kernel Fails

Xepher97 said:
SM-N935K Android 8.0 Flash Kernel Fails
Click to expand...
Click to collapse
this is only for n935f bro..not yet supported for korean version.also still in nougat 7.0..im waiting for firmware of f version then i will be update to support 8.0

Can you add DeX support for kernel? I don't know if DeX needs any kernel code or installing apk works. This is more like a question than request.

Awesome work! Im new to this. Installed it last night. I love the disabled encryption i can now view my saved wifi passwords ( works well with androdumpper). Rooting has now meaning hehe. Question.. is there an advantage in undervolting cpu/gpu in android ? Any tips in tweaking ? Thanks a lot @jaran kepang

InfinateXtremer said:
Can you add DeX support for kernel? I don't know if DeX needs any kernel code or installing apk works. This is more like a question than request.
Click to expand...
Click to collapse
i guess it need some patch for support dex..
i cant try because i dont have dex..thats make me aware to find out the problem..:fingers-crossed::fingers-crossed:
donart81 said:
Awesome work! Im new to this. Installed it last night. I love the disabled encryption i can now view my saved wifi passwords ( works well with androdumpper). Rooting has now meaning hehe. Question.. is there an advantage in undervolting cpu/gpu in android ? Any tips in tweaking ? Thanks a lot @jaran kepang
Click to expand...
Click to collapse
u can find about kernel tweaks in superkernel s7e thread..link in first post..for me i undervolt -37mv for all cpu and gpu..but if u getting any error after uv like random reboot or freezing..try revert back the tweak..

[Kernel][Sagit] HastyKernel ⚡️ - Custom ROMs

HastyKernel
for Xiaomi Mi 6
Features
Based on the latest CAF tag (LA.UM.6.4.r1-08000-8x98.0)
Upstreamed to 4.4.129
Clang 7.0.1
KCAL color control
Boeffla wakelock blocker
Adjust or disable vibration
WireGuard support
Performance and power optimizations
Westwood congestion algorithm by default
Tweaks from Pixel 2
Installation
1. Flash in recovery
Downloads
Custom ROMs(Android 8.1.0)
AndroidFileHost
ROMs Support
I support all ROMs based on LOS/AOSP
MIUI will never be supported by me
Q: Can you add xyz feature?
A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration.
I will NOT add the following:
Overclocking or underclocking of CPU or GPU
Undervolting
Any governors other than interactive
Any schedulers other than cfq and bfq
Anything that compromises performance
XDA:DevDB Information
HastyKernel, Kernel for the Xiaomi Mi 6
Contributors
Miftahzy98, blankaf
Source Code: https://github.com/blankaf/kernel_xiaomi_msm8998
Kernel Special Features:
Version Information
Status: Alpha
Created 2018-04-25
Last Updated 2018-04-25

Changelog:
Code:
[B]25/4 2018[/B]
Initial release

Did anyone try?

Umit06 said:
Did anyone try?
Click to expand...
Click to collapse
Yes, did install it on LOS and now it only boots into fastboot mode.
Edit: trying to flash TWRP through fastboot won't work as well. The install through fastboot seems to work but when I try and boot into TWRP it just falls back to fastboot. Any help is welcome!

Ultraschorsch said:
Yes, did install it on LOS and now it only boots into fastboot mode.
Edit: trying to flash TWRP through fastboot won't work as well. The install through fastboot seems to work but when I try and boot into TWRP it just falls back to fastboot. Any help is welcome!
Click to expand...
Click to collapse
Miflash.
Make sure to not relock the bootloader.

Working perfectly on OmniRom, cheers!

pt ok？

ChriZz12 said:
Working perfectly on OmniRom, cheers!
Click to expand...
Click to collapse
Hi i am also on omni which kind of main differences have you noticed please.

NickTheSickDick said:
Miflash.
Make sure to not relock the bootloader.
Click to expand...
Click to collapse
Thanks for your hint. I am a Linux user, so I had to dig a little deeper But it's working again.

Finally!
Thanks bro!

work on treble rom?

masara59 said:
work on treble rom?
Click to expand...
Click to collapse
no

Thanks work with cozzmy LOS

ill switch to this one cuz of kcal module

Does the name hasty kernel suggest the kernel was made in a rush.

Bootlooping on Atomic

Anyone tried this on DotOS?

does not work with AOSiP
OS does not boot and it falls into fastboot mode

Hasty name truly suitable ? performance is great on OMNI.
Damonps2 and dolphin runs better without tweaks i usually made on pther kernel. Definitely not for the faint hearted users.

Can rr5.8.5 7.1.2 mi6 use that

[ALL][Kernel][8.1][AOSP] LightningZap! Kernel

Greetings all!
Introducing LightningZap! kernel for the Moto Z2 Force. It is based off Pantheon kernel with some of my own little tweaks and enhancements to improve performance and battery life.
Pantheon features:
Upstream kernel from source
Edits to avoid Safetynet/CTS (If you have root, it will fail signature check inherently without SUhide or Magisk hide)
Disabled CRC check
Disabled dm-verity
Over Clock / Under Clock on CPU Frequencies added:
Little CPU: 175 MHz, 230 MHz, 2035 MHz
Big CPU: 175 MHz, 230 MHz, 2476 MHz; 2592 MHz
Slight undervolt (our device is overvolted compared to other msm8998 devices)
UC GPU (added 180 Mhz step for battery savings when web browsing, low GPU usage)
OC GPU (changed 710 MHz to 750 MHz)
Same Adrenoboost tweaks as the Pixel 2 ElementalX kernel.
Wakelock fixes by Boeffla
Added Zen, FIOPS, BFQ, and SIO IO schedulers
LigthningZap! Features:
Insane readahead tweak: No need to raise readahead cache with a kernel tweaker. With this tweak all partitions are set to their maximum readahead possible and is handle by the io-scheduler. This tweak is best used with FIOPS (set by default), BFQ and SIO schedulers. I haven't ran many tests on other schedulers.
LightningZap! sysctl tweaks: Adjust values for kernel system controls for better performance and battery life.
Lionheart governor added: This is the recommended governor for LightningZap! kernels. I have set the dbs_tuners_ins.sampling_rate and min_sampling_rate to 100 (lowest value)so the end user can adjust the values in their favourite kernel tweaker add to suit their needs. It's very simple, when setting the sampling rates, a high number will improve battery life but performance will take a slight hit, and a lower number will increase performance but battery life will take a small hit. Values for these range between 100-1000. This governor is not set by default, but can be set with you favourite kernel tweaking app
Aroma Installer: Same options as in Pantheon kernel for now. More to come as I work them in.
Compiled with Linaro 4.9 only (no clang here)
See second post for fixes, improvements, changelogs, and downloads
Source code: LightningZap! kernel for nash
Flashing Instrcutions:
Device must be rooted with custom recovery (TWRP)
Place LightningZap! kernel for nash on sdcard
Reboot to recovery and flash .zip
Follow on screen prompts
Re-flash root (Magisk)
Reboot, wait 15 minutes, and enjoy
For further adjustments, I recommend Kernel Toolkit
I wasn't going to post this kernel, but since there is very little other support and options going on with this phone, I changed my mind. I ask everyone to keep things civil, do your best to stay on topic, be patient when asking/answering questions, try to search for an answer before you post a question, and PLEASE make a backup.
Special thanks to Uzephi for the base source code (Pantheon Kernel)

Fixes, Improvements, Changelogs, and Downloads
LightningZap! kernel for nash v1.0 (Download link)
Insane readahead tweak (v2)
LightningZap! sysctl tweaks
Lionheart governor
Aroma Installer
Compiled with Linaro 4.9 only (no clang here)
USB Tethering fixed

Working on LineageOS?

matheusgcdj said:
Working on LineageOS?
Click to expand...
Click to collapse
He used my LOS base. Will work on LOS, but not other AOSP ROMs. @thomas.raines, you might want to start merging from o8x-caf. Your kernel is at 4.4.132 latest stable is 4.4.138. (Just going off your git). It might make WiFi break with LOS, but @npjohnson stated they will be merging those caf commits in the very near future where you don't need two forks anymore.
Thanks for the USB tethering fix as well. Merged into mine today and sending a release shortly.
Edit: oh, yeah, verity bypass isn't in my kernel anymore, so if you want to add it, you might want to pick it from EX, Franco, or Kirisakura kernels. Didn't see the point, so when I rebased, I didn't pick it in.

matheusgcdj said:
Working on LineageOS?
Click to expand...
Click to collapse
Haven't tested. Would be nice if you tested for me...
Uzephi said:
He used my LOS base. Will work on LOS, but not other AOSP ROMs. @thomas.raines, you might want to start merging from o8x-caf. Your kernel is at 4.4.132 latest stable is 4.4.138. (Just going off your git). It might make WiFi break with LOS, but @npjohnson stated they will be merging those caf commits in the very near future where you don't need two forks anymore.
Thanks for the USB tethering fix as well. Merged into mine today and sending a release shortly.
Edit: oh, yeah, verity bypass isn't in my kernel anymore, so if you want to add it, you might want to pick it from EX, Franco, or Kirisakura kernels. Didn't see the point, so when I rebased, I didn't pick it in.
Click to expand...
Click to collapse
I'm using your AOSP branch (I thought)... It's working on AOSiP flawlessly. Thanks for the heads up on the verity bypass. I'm actually working on that now, but not sure if I'm going to or not... Glad I could help with the USB thethering...

thomas.raines said:
Haven't tested. Would be nice if you tested for me...
I'm using your AOSP branch (I thought)... It's working on AOSiP flawlessly. Thanks for the heads up on the verity bypass. I'm actually working on that now... Glad I could help with the USB thethering...
Click to expand...
Click to collapse
Pantheon branch is stale, o8x-caf is current.

Motomods?
Sent from my Moto G4 Plus using XDA Labs

KelleyCook said:
Motomods?
Click to expand...
Click to collapse
If it comes off my source, Motomods should work.

thomas.raines said:
Haven't tested. Would be nice if you tested for me...
I'm using your AOSP branch (I thought)... It's working on AOSiP flawlessly. Thanks for the heads up on the verity bypass. I'm actually working on that now, but not sure if I'm going to or not... Glad I could help with the USB thethering...
Click to expand...
Click to collapse
Removed the stale branch. My source just got 4.4.139 merged into it. I use Nathan Chancellor's msm-4.4 tree if you ever don't want to wait for jbats or I to push the Linux-stable commits.

Uzephi said:
Removed the stale branch. My source just got 4.4.139 merged into it. I use Nathan Chancellor's msm-4.4 tree if you ever don't want to wait for jbats or I to push the Linux-stable commits.
Click to expand...
Click to collapse
Just merged the 08x-caf branch... Thanks

So if flashed on stock and it broke my Wifi how do I go about fixing it? This Moto Z2 force is like starting all over. I thaught i was good at this once? Other than no WiFi the kernel works great. Thanks for the development this phone needs all it can get.

I got a bootloop. Any advice?
I'm on Lineage OS 15.1-20181106.

zZLord said:
I got a bootloop. Any advice?
I'm on Lineage OS 15.1-20181106.
Click to expand...
Click to collapse
Unless OP updated for Treble (mounting /vendor instead of /oem) this won't work on Treble. Any LOS built after August is Treble enabled. Try with DU official.