Hello guys, I need help and recommendations to fix my problem on my j7 prime sm-g610y because the fingerprint is not accurate and its so annoying for me to press home button always. I need your help guys. Thanks!
Registers more than once, and places in all possible positions while setting.
Aepo said:
Registers more than once, and places in all possible positions while setting.
Click to expand...
Click to collapse
okay thanks, but they said the more fingerprints the more it will not response. is it true?
icodix said:
okay thanks, but they said the more fingerprints the more it will not response. is it true?
Click to expand...
Click to collapse
I never heard of it bro. For me it speeds more, because it will not recognize several at the same time, only 1 at a time, always the closest to the position that was registered.
Aepo said:
I never heard of it bro. For me it speeds more, because it will not recognize several at the same time, only 1 at a time, always the closest to the position that was registered.
Click to expand...
Click to collapse
thanks for the tip bro! gonna try it.
Related
Good evening everyone,
There used to be an application on HTC HD2, Which was allowing screen to wake up when passing by the finger over the presence detector.
Has anyone heard about such a possibility on our GN please?
Or is there a possibility to do it's just moving the phone In a certain way that we would be able to learn him?
Thank you in advance.
hi, i have tried Tasker . it detects the proximite sensor, but it tells me it is not able to turn on the screen on galaxy note.
thank you very much for trying.
any other idea from anyone is welcome.
thanks
Ok, here is the solution, the application proximityscreenoff is making the job perfectly .
Hope this will help some people
Sent from my GT-N7000 using Tapatalk
Awesome!!
didier74 said:
Ok, here is the solution, the application proximityscreenoff is making the job perfectly .
Hope this will help some people
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Dude! thts an awsome app!! i mean its like totally sci-fi! gud find bro!
only regret is tht in order to unlock it we have to keep the sensor covered for atleast 1 sec, sounds short but in reality it seems a bit long, only if it cud unlock just like it locks with a swipe!
Thugsin313 said:
Dude! thts an awsome app!! i mean its like totally sci-fi! gud find bro!
only regret is tht in order to unlock it we have to keep the sensor covered for atleast 1 sec, sounds short but in reality it seems a bit long, only if it cud unlock just like it locks with a swipe!
Click to expand...
Click to collapse
What about "Tap Tap App"? If I remember well, by just tapping (or swiping) twice, the screen got unlocked... tested once for y pal, worked fine in my opinion...
Cheers,
I
I tried tap tap off and it works really nice. Do you think that leaving the proximity sensor on for all the time could cause some issues?
paris.gr said:
I tried tap tap off and it works really nice. Do you think that leaving the proximity sensor on for all the time could cause some issues?
Click to expand...
Click to collapse
All I can think of is a higher battery drain and maybe some wakelocks or in the worst case it's unable to enter deep sleep at all.
Yes thanks this app is really great too.
Sent from my GT-N7000 using Tapatalk
Enjoy: www.n4checker.com
Any feedback wold be appreciated: things to improve, things you want, i'm all open.
ludalex07 said:
Any feedback wold be appreciated: things to improve, things you want, i'm all open.
Click to expand...
Click to collapse
Sometimes there's an error retrieving the status of just a single country's status. Refreshing the whole thing just to refresh that seems like a burden on your server to me. Maybe have a little refresh icon next to each country in the list that refreshes the status only for that country? Just a suggestion.
Good job though, thanks!
Nice
Sent from my Nexus 4 using Tapatalk 2
ed10000 said:
Sometimes there's an error retrieving the status of just a single country's status. Refreshing the whole thing just to refresh that seems like a burden on your server to me. Maybe have a little refresh icon next to each country in the list that refreshes the status only for that country? Just a suggestion.
Good job though, thanks!
Click to expand...
Click to collapse
This in nice.
Also a feature to add a number of seconds/minutes to automatically refresh. ( most of us know how to do it but a suggestion is a suggestion! )
Also a "notify me" when availiable thingy might be nice. Not with e-mails or anything like that....with rss or a sound maybe?
P.S. Saw this website 2-3 days ago. Love it
ludalex07 said:
Any feedback wold be appreciated: things to improve, things you want, i'm all open.
Click to expand...
Click to collapse
One thing that comes to mind is a direct link to the device in the Play Store. Or maybe it does this when one is actually in stock?
Thanks ! I just wish that it showed that the nexus was in stock. I now know that I can not buy it anywhere in the world.
ed10000 said:
Sometimes there's an error retrieving the status of just a single country's status. Refreshing the whole thing just to refresh that seems like a burden on your server to me. Maybe have a little refresh icon next to each country in the list that refreshes the status only for that country? Just a suggestion.
Good job though, thanks!
Click to expand...
Click to collapse
It isn't a burden on the server, but it's a nice suggestion (that I also thought about) - will consider it, thanks.
Intruder7s said:
This in nice.
Also a feature to add a number of seconds/minutes to automatically refresh. ( most of us know how to do it but a suggestion is a suggestion! )
Also a "notify me" when availiable thingy might be nice. Not with e-mails or anything like that....with rss or a sound maybe?
P.S. Saw this website 2-3 days ago. Love it
Click to expand...
Click to collapse
There's already a mailer set up for 5 emails , but it uses php function's send() which works REALLY slow on my server and it would be useless with more than 10 emails. I'm looking for other solutions anyway. Thanks for the tip.
crachel said:
One thing that comes to mind is a direct link to the device in the Play Store. Or maybe it does this when one is actually in stock?
Click to expand...
Click to collapse
A direct link could be very easy to implement but useless as you need to be under the country's IP to view it, and relying on web proxy to link it seems not praticable to me.
EDIT: please advise this as Newsworthy thread (if you wish)!
Updated with "Sort by country" option : http://ludalex.soupwhale.com/n4checker/ - hope you'll find it useful.
Can you add a check for the bumper?
Sent from my Nexus 4 using Tapatalk 2
mobilehavoc said:
Can you add a check for the bumper?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I second this please. Also I didn't manage to get stock level on Spain site after like 10 reloads?
mobilehavoc said:
Can you add a check for the bumper?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yep, done!
ludalex07 said:
Yep, done!
Click to expand...
Click to collapse
Black bumper shows in stock in UK! I WANT!
Shame I can't buy it from Spain. Nice job.
This is fantastic, thanks!
Could you perhaps color the availability status? Green for In Stock and Red for Out of Stock?
Makes it easier to see when further away.
Thanks
EDIT: Perhaps you could create direct links to the Items as well.
Wow brother its nice, BTW when i clicks on main refresh button it shows me one result but when i click on specific country refresh button it shows me different result..why so ?
So does this auto refresh or is this just an easy way for us to click the refresh button and check?
Thanks, but how is this better than going to https://play.google.com/store/devices/details?id=nexus_4_16gb
H4CK_H0PP3R said:
Wow brother its nice, BTW when i clicks on main refresh button it shows me one result but when i click on specific country refresh button it shows me different result..why so ?
Click to expand...
Click to collapse
It happens when you switch country/device too fast, not giving the time to the previous selection to load.
Gibsonflyingv said:
So does this auto refresh or is this just an easy way for us to click the refresh button and check?
Click to expand...
Click to collapse
It auto updates itself every few minutes.
TrueBrush said:
Thanks, but how is this better than going to https://play.google.com/store/devices/details?id=nexus_4_16gb
Click to expand...
Click to collapse
Hurr durr.
Bavilo said:
Could you perhaps color the availability status? Green for In Stock and Red for Out of Stock?
Makes it easier to see when further away.
Thanks
EDIT: Perhaps you could create direct links to the Items as well.
Click to expand...
Click to collapse
Yes maybe I could do something like that, thanks for the tip.
TrueBrush said:
Thanks, but how is this better than going to https://play.google.com/store/devices/details?id=nexus_4_16gb
Click to expand...
Click to collapse
Its possible the phones will go on sale again by region Australia then Europe then USA /Canada based on timezones. In this case it would give some advanced warning.
Some people are trying to buy out with their own country this means they don't need to have proxy etc set up all the time.
Sent from my Nexus 7 using Tapatalk 2
Hi everyone,
My GG was on null 10.1 working fine. This evening i realised that the watch was not vibrating at all.
I restarted. No vibration.
I wiped. No vibration.
I am now downloading the stock firmware and am going to flash via odin because i think it is a hardware failure and the watch needs to go to service point.
Anyone with similar experience?
Thank you in advance!
gidi said:
Hi everyone,
My GG was on null 10.1 working fine. This evening i realised that the watch was not vibrating at all.
I restarted. No vibration.
I wiped. No vibration.
I am now downloading the stock firmware and am going to flash via odin because i think it is a hardware failure and the watch needs to go to service point.
Anyone with similar experience?
Thank you in advance!
Click to expand...
Click to collapse
Thankfully havnt had this happen to me!
I hope you didn't get it wet did you ?
fOmey said:
Thankfully havnt had this happen to me!
I hope you didn't get it wet did you ?
Click to expand...
Click to collapse
Nope. No water damage. At least that i know of.
gidi said:
Nope. No water damage. At least that i know of.
Click to expand...
Click to collapse
Dial "*#0*#" in the dialer & do the vibration test.
fOmey said:
Dial "*#0*#" in the dialer & do the vibration test.
Click to expand...
Click to collapse
Did the test and i get no vibration.
gidi said:
Did the test and i get no vibration.
Click to expand...
Click to collapse
Yikes, Try flash stock rom.. HOPEFULLY IT WORKS !
Otherwise sadly, looks like a defect.
Sorry couldnt be much more help!
fOmey said:
Yikes, Try flash stock rom.. HOPEFULLY IT WORKS !
Otherwise sadly, looks like a defect.
Sorry couldnt be much more help!
Click to expand...
Click to collapse
Thank you mate for your time and everything you've done that made the Gear a better device.
Will post back after flashing stock.
Flashed stock and the vibration still is not working. Didinthe *#0*# test and it does not vubrate at all.
Very displeased with that.
Off to the service point.
I am having the same problem. My gear isnt vibrating. Any luck getting it fixed?
Mine just started doing the same thing as well. And vibration test did nothing.
Sometimes I have a sudden cursor flash on the middle of the screen. It seems like its totaly random, I can't even tell if its a cursor, because it lasts for like half a second. But it gets very annoying. Anyone else with this problem? Possible solutions? I have the Tab S2 8.0 inch version.
What OS?
I thought I was crazy but yes I also have it. I'm on 7.0 with my S2 8.0 t713
Nougat bugs..
Niii4 said:
What OS?
Click to expand...
Click to collapse
Android Nougat
mrbtree98 said:
I thought I was crazy but yes I also have it. I'm on 7.0 with my S2 8.0 t713
Click to expand...
Click to collapse
Yeah first I thought the same, like if my eye was tired or something. But then it happend several times, there is nothing we can do about it. Let's just wait for a software update and we shall see if that solves it.
The CIA is watching you guys. xD
Niii4 said:
The CIA is watching you guys. xD
Click to expand...
Click to collapse
Well, that would be a little bit scary to be honest. Hope it's not the case.
Holy Crap! This has been happening to me and it's driving me nuts.
Edit: I found a post for another device with a similar issue.
Hey!! I just saw this post. I actually think I resolved this issue by checking the "Large Mouse Pointer" option in the accesibility section of the settings and just leaving it checked.
Click to expand...
Click to collapse
I'm going to give this a try and hope it works. This is truly driving me bat **** crazy.
https://youtu.be/41noraqm_WA
I had the same issue and found the same fix a while back. I haven't seen the cursor flash since turning on the large cursor option.
GldRush98 said:
I had the same issue and found the same fix a while back. I haven't seen the cursor flash since turning on the large cursor option.
Click to expand...
Click to collapse
That's encouraging! It hasn't been that long since I changed to the large curser so I'm keeping my fingers crossed. So far, so good.
Sent from my SM-T713 using Tapatalk
My Xperia 1 ii was supplied by Vodafone and has latest software update.
I have noticed an issue whereby when I wake my device up and I'm in a fairly dim room it wakes up on full brightness every the and quite slowly reduces down to just off of minimum.
Don't understand why it always starts on full brightness?
Same thing happening here, I assume it's a bug that'll be resolved in the future.
I don't have this problem. But I do have issue with the brightness in general. In bright sunlight it's very hard to read the screen, even at 100% brightness. (Much worse than my wife's fruit phone for example.)
I agree also that the brightness could be better in strong sunlight however on a positive note I do think the issue I has has been fixed in the last update I received a couple of days ago.
hpsauce37 said:
I agree also that the brightness could be better in strong sunlight however on a positive note I do think the issue I has has been fixed in the last update I received a couple of days ago.
Click to expand...
Click to collapse
What's the model you have and firmware update version?
cd993 said:
What's the model you have and firmware update version?
Click to expand...
Click to collapse
XQ-AT51 Vodafone
58.0.A.3.39 build number
hpsauce37 said:
XQ-AT51 Vodafone
58.0.A.3.39 build number
Click to expand...
Click to collapse
Thanks, did you clean flash or do you know of a way to safely update without losing data? Are you stock or rooted?
hpsauce37 said:
I agree also that the brightness could be better in strong sunlight however on a positive note I do think the issue I has has been fixed in the last update I received a couple of days ago.
Click to expand...
Click to collapse
Not fixed for me after update. Still sometimes brightness is at full on autobrightnes when I unlock device.
tomo100brt said:
Not fixed for me after update. Still sometimes brightness is at full on autobrightnes when I unlock device.
Click to expand...
Click to collapse
Actually I have to agree it is still there ?
hpsauce37 said:
Actually I have to agree it is still there
Click to expand...
Click to collapse
Settings, Display, Cover Selection -> select others. This resolved the problem for me.
Same here. Auto brightness is actually a mess (indoors and especially @ night).
Need an update to sort this ASAP.
I'm pretty sure this was an issue on another Sony phone I had also..
Other than this the phone has been great and battery life is really solid for me.
philip67 said:
Settings, Display, Cover Selection -> select others. This resolved the problem for me.
Click to expand...
Click to collapse
Thanks, this setting solved in my case
Auto brightness issue
gl2k1 said:
Thanks, this setting solved in my case
Click to expand...
Click to collapse
Didn't do much in my case
Same here, solution does not work...
This happened to me as well. The problem went away after a couple of days. Probably the adaptive brightness learning itself.
iArvee said:
This happened to me as well. The problem went away after a couple of days. Probably the adaptive brightness learning itself.
Click to expand...
Click to collapse
Ditto
iArvee said:
This happened to me as well. The problem went away after a couple of days. Probably the adaptive brightness learning itself.
Click to expand...
Click to collapse
I'm curious, is it the case that the adaptive brightness learns? More specifically if it sets a brightness level automatically and I up it a little manually using the slider, does this help it learn my custom value in that environment for future use in its automation?
I haven't really used auto brightness before however feeling now it would be handy, as I was finding myself adjusting it a lot. Been using it for a day now and so far it's doing a good job, just occasionally I'll adjust it.
See screenshot
augie7107 said:
See screenshot
Click to expand...
Click to collapse
Ahh that's handy, thanks for that! I use a quick toggle to activate it and hadn't seen that screen with that informative text.
Great to know!