Fail to flash firmware - Xiaomi Mi A2 / 6X Questions & Answers

Hello, my phone still does not work. I'm trying to flash the stock firmware through fastboot, but when it comes to flashing system.img I get error. I tried to do it via MiFlashTool but it does not work either. It also booted in EDL mode but stays stuck in boot.img. Any ideas?

Related

Help me please! My phone was bricked.

Hi,
My Mi4 was bootloop on logo MI. It was just always going to the MI logo and would keep restarting after 3s-4s. I tried to get it into fastboot then flashed roms like:
cancro_images_6.5.5_20160419.0000.19_6.0_cn
cancro_global_images_V8.1.6.0.MXDMIDI_20161230.0000.00_6.0_global
It show me "operation completed successfully" but it still bootloop when it restart. I cant get in recovery mode.
Lastest rom i used: AospExtended-v4.6-cancro-20171101-0156-OFFICIAL.zip
Lastest rom i flashed then my phone was brick: miui_MI3MI4GlobalEdit_V8.2.1.0.MXDMIDL_6.0
Recovery TWRP 3.1.0.0
Thanks for your attention.
Try to flash ROM via fastboot
With miflash
Yes I think you need to flash your phone with OTHER MiFlash.
Sometimes I got failed/unsuccessfully flashing with MiFlash, but revivify successfully with MiFlash Beta...

Note 5 N920G Stuck at Samsung logo

I'm in a weird situation, I flashed the latest stock firmware for my phone (N920GDDS4CRD2_N920GODD3CQJ2_N920GUBU4CRA1_HOME.tar) through odin and now it is stuck. Then I went to download mode again to flash twrp just to try to wipe cache and stuff to get it working, no luck as it wouldn't boot into recovery. Then I tried flashing the same firmware through odin again but I get an error (sw rev. check failed), I know why I am getting this. its because the phone doesn't allow downgrading and the firmware that I am trying to flash is the latest one. Any help would be appreciated.
Check last twrp installed. Next try flash any custom rom.zip

Can't flash stock. Can't flash recovery.

Turned off the OEM unlock on my phone like an idiot. When I turn on the phone there is "Error while updating..." but I can boot into download mode. I tried flashing stock roms but always end up as error. I also tried flashing twrp but it's still error.
Andrenaline_Rush said:
Turned off the OEM unlock on my phone like an idiot. When I turn on the phone there is "Error while updating..." but I can boot into download mode. I tried flashing stock roms but always end up as error. I also tried flashing twrp but it's still error.
Click to expand...
Click to collapse
You've might flashed an older stock firmware. That's why it failed. Flash the latest firmware.

twrps not installing

is there any reason why flashing twrps via ADB would send z5 pro gt into boot loop into bootloader unable to access the custom recovry or phone needing to do emergency flashing via qfil to stock firmware i did previously use trwps on device to flash files and to sign boot to always boot twrps recovery when trying to access recovery mode . (before bootlooping)
affter bootlooping and fixing via qfil i have been unable to successful install trwps if i do it bootloop to bootloader.
whats the difference between "meta" / "flat" options in qfil
tried locked and unlocked bootloader on both 10.5.304 and 11.1.021 also tried to go straight to recovery mode affter twrps flashing on both firmware same thing lead me bootloop needing to qfill to 10.5.30
another question can i qfil flash to 11.1.021 straight away without having having to qfil 10.5.30 then ota updating to 11.1.021..
thanks in advance
leerh said:
is there any reason why flashing twrps via ADB would send z5 pro gt into boot loop into bootloader unable to access the custom recovry or phone needing to do emergency flashing via qfil to stock firmware i did previously use trwps on device to flash files and to sign boot to always boot twrps recovery when trying to access recovery mode . (before bootlooping)
affter bootlooping and fixing via qfil i have been unable to successful install trwps if i do it bootloop to bootloader.
whats the difference between "meta" / "flat" options in qfil
tried locked and unlocked bootloader on both 10.5.304 and 11.1.021 also tried to go straight to recovery mode affter twrps flashing on both firmware same thing lead me bootloop needing to qfill to 10.5.30
another question can i qfil flash to 11.1.021 straight away without having having to qfil 10.5.30 then ota updating to 11.1.021..
thanks in advance
Click to expand...
Click to collapse
Okay ?
The point is ? I must unlock , install twrp and flashing via ota ?
Flash via qfil done and isn't working
My touchscreen still have thats issue
IamRdw said:
Okay
The point is ? I must unlock , install twrp and flashing via ota ?
Flash via qfil done and isn't working
My touchscreen still have thats issue
Click to expand...
Click to collapse
if you want OTA(over the air) updates you need to lock bootloader. otherwise the updater will say something like phone has been rooted and they cant provide you an update
https://forum.xda-developers.com/z5-pro-gt/how-to/installing-ota-update-11-5-141-via-twrp-t4050027
http://anago.2ch.sc/test/read.cgi/sm...ne/1577014188/ theres a lot of information on this link here are some highlights for me
_____________________________________
>> Crash dump loop of 113 ROM burnt Z5PROGT can be restored by burning CNROM for the time being,
Even if I tried it again, it was useless, so if I look at the syntax at the time of batch execution, it seems that vbmeta.img is not burned.
It says unrecognised option `--disable-verification '.
This time, the boot loader loop only started, and TWRP couldn't start.
This time it may be packed
__________________________________________
>> 117
I'm sorry I want to confirm.
Where did you use the fastboot command?
①fastboot --disable-verification flash vbmeta vbmeta.img
②fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
It is ① that I instructed, but it looks like there are two kinds when I check it on the net.
He seemed to have hit it without knowing it.
Excuse me, can you hit both again?
________________________________________
>> 150
>> I burned 113 ZUI11 version Gro ROM.
I re-added TWRP, but when I started it, it was usable normally, so I could add Magisk,
After that, it only seems to be unavoidable that it only starts up in normal recovery mode.
It is troublesome to do it every time you want to use TWRP, but it can't be helped.
__________________________________________________ _______
this helped Solved

Stuck on LOGO...... Redmi 9c

I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
QAD765 said:
I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
Click to expand...
Click to collapse
Boot into fastboot (I had to first hold pwr+volup fand when screen goes black hold pwr+voldwn). Download stock fastboot ROM and run flash_all.bat
QAD765 said:
I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
Click to expand...
Click to collapse
Install the default Stock system again from the recovery, also if the recov does not work for you
Install the default Stock system again from the recovery, also if the recovery does not work, use another one like OFOX recovery (Orange fox) and install the stock system from there, Install the phone's stock firmware or 12.0.10.
Stock ROMs MIUI Angelica: https://xiaomifirmwareupdater.com/archive/miui/angelica/

Categories

Resources