Database Develop

[ROM][7.1.2][OpenKirin's LineageOS 14.1 - Huawei P8Lite ][Update 31/12/2017]

So, since the other thread is pretty clogged up, I have decided to create a new one (even tough I know this is going to get even more clogged up...)
So the day has come, since the closed beta I have fixed some bugs and I have (finally) setup the downloads server, it's the right time.
I am not really good writing this kind of posts, you know what you want, and I am too tired to talk about the risks of not being careful flashing, etc...
Installation Instructions
Your device must be updated to EMUI 4.1 !
You should have already installed TWRP 3.1.1-0 !
Format data in TWRP and reboot device again into TWRP ( if you come from stock EMUI 4.1 )
Wipe Factory Reset in TWRP
Flash LOS 14.1 zip and reboot to System
Reboot device in TWRP and install Gapps ( optional )
Install Magisk or SuperSU if you need ROOT ( optional )
Enjoy
Currently Working List
Audio
Camera fully working with Footej Camera ( via PlayStore )
WiFi
BT with a2dp
dual SIM with data network connecting
Lights
Sensors
Off-mode charging
adb & mtp
Internal/External Storage
Flash
Touch-screen
LiveDisplay
Screenrecord
HWC partially
GPS
NFC
DT2W
Currently Not Working
Encryption
SIM without LTE/4G support
Stock camera video recording, please use Footej Camera via PlayStore !
There may be others small issues !
Downloads
lineage-14.1-20171231_141649-UNOFFICIAL-alice.zip md5 : 1078349b8c78652ba1aaf2ed7548d361
Gapps ( recommended version : ARM64 - 7.1 - nano )
Please use always the latest update from Gapps
Misc
If you have a Honor 4X and the rom isn't compatible (it shouldn't be compatible so don't worry) send me a PM (unless you are @panchovix because I already know that he is interested lol), because I need a little group of people to test the adapted 4X version, but that rom will be published in the correct subforum, so please let's keep it tidy.
Please think before you post, I wouldn't like to reach 50 pages within 2 weeks, so if you just want to post "OMG SO HYPED" do it in the other thread or don't do it at all.
P.S: The Github repo will be updated as fast as I can, I understand that some people want to port roms now that we have reached 'certain stability', but I am just one person and my time is limited.
Kernel GPLv2 compliant : android_kernel_huawei_hi6210sft !
This ROM is provided by OpenKirin TEAM (XePeleato, OldDroid, surdu_petru )​
XDA:DevDB Information
LOS 14.1, ROM for the Huawei P8lite/P8 Lite
Contributors
XePeleato, surdu_petru, OldDroid, olrak2
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android MM (EMUI 4.1)
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-10-15
Created 2017-01-21
Last Updated 2017-12-31

@XePeleato OMG SO HYPED, ok nope haha, thanks man, finally it is here now on XDA, good luck on the rest (because just watching there are just little bugs, atleast for me), as always i say it to you, Good job! and Thanks for remembering us 4X users!
@MarcoPLs @Zizo17 @ericotena @keikari good luck here, we have someone that want to help us send him a PM, and if you know more people using the 4X (i know there are more, probably you that are you reading this :I), PM him (don't comment here, he doesn't want to inundate the thread)
And for you P8 lite users that can get the rom working already, you are lucky! enjoy the rom, for me it is stable for daily use in my case

it's the same rom from the other thread? but on a zip file?
what are the requirements to safely flash this trough twrp?

@Z3NG3R1 this is different one from htcmania, this one has a lot of less bugs, and yes on a zip file
i think you should know how to flash roms at this moment, make a backup and flash it, if something goes wrong restore lol (flashing custom roms has no requeriments, except for having OBV unlocked bootloader and twrp)

Oh wow! So, those are the only bugs? Everything else is up and running? Cool. I'll try this. I can't say thanks enough. @XePeleato the site isn't loading??

@panchovix yeah, I know how to backup and flash a ROM...but what I was saying is that in the toher post, the were saying that you needed a different twrp recovery bro...so that's why I asked...but I'll install it right away then! I'm so happy that this phone is getting custom roms!!!

@Z3NG3R1 oh i see, reading the update binary it seems you need that twrp itself recognizes your phone as hi6210sft (this depends on TWRP) and ALE-L21 (this depends of build.prop), so if you have both you are good

@panchovix well...I think I have both..my twrp version is 3.0.2.0 and my phone is ALE-21 converted to dual sim..do you think I'm good?

Not working Website :crying:
Not working website :crying:

WoW!! Great work thanks!
The Play store is working?

seems the link died or it is saturated, atleast i got the download before the site went down, weird

So, if you get the ear speaker working i will flash it on my Honor 4c, and try it for daily use
Sent from my Honor 4c using Tapatalk.

link error?
link no funciona?

Please report bugs to Xepeleato only with a logcat file. There are free Apps for logcats available in playstore. The Dev can only fix bugs if he knows what went wrong.

http://lineageos.org/Update-and-Build-Prep/
We will NOT be shipping root baked into the ROM.
Root will be a downloadable zip based install similar to gapps installation (only need to flash it once).
Home builders that want to bake su back into the ROM can use the command ‘export WITH_SU=true’ prior to building.

Link is not working

Is there ota updates yet?

Btw https://stats.lineageos.org/
84. hi6210sft 163

panchovix said:
seems the link died or it is saturated, atleast i got the download before the site went down, weird
Click to expand...
Click to collapse
Can you please upload it somewhere

The link is fixed, the backend server died in the middle of the night, it should be fine now.
Sent from my FRD-L04 using Tapatalk

LineageOS 16.0 for Lenovo Yoga Tab 3 Plus (YTX703F / YTX703L)

2018-10-02: It is my pleasure to announce, together with @Quallenauge and @matshias, the availability of unofficial LineageOS 16 builds for the Lenovo Yoga Tab 3 Plus devices (YTX703F and YTX703L).
2019-03-12: And now official lineage-16.0 builds as well!
Issues
Audio over Wi-Fi Display is transmitted at the speed of sound, instead of speed of light
Flashing over anything else (official Lineage 15.1 etc) is not supported - data wipe is required. Working on 2 migration packages: unofficial <-> official and 15.1 <-> 16.0
Double tap to wake (dt2w) does not work too well over long term and I don't recommend enabling it - only added to build per user request
Official Instructions
LineageOS wiki: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Migrating from Unofficial 16.0 to Official 16.0
Boot to TWRP
Install Lineage OTA zip
Install the provided migration-to-official.zip
Reboot from TWRP to system
Migrating from Official 15.1 to Official 16.0
Boot to TWRP
Wipe system partition. This step is critical. User data is not lost when system partition is erased.
Install Lineage OTA zip
If you had OpenGapps in 15.1, then you must install new OpenGapps for ARM64 for Android 9.0. If you didn't have OpenGapps in 15.1, you must not install any Gapps package.
Reboot from TWRP to system
Migrating from Official 16.0 to Unofficial 16.0
Boot to TWRP
Rename the provided migration-to-official.zip to migration-to-unofficial.zip
Install Lineage OTA zip
Install the renamed migration-to-unofficial.zip
Reboot from TWRP to system
Downloads
Migration script: [migration-to-official.zip]
Unofficial LineageOS 16.0 2019-02-04: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Unofficial LineageOS 16.0 2019-01-27: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Unofficial LineageOS 16.0 2018-12-13: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
Changelog
2019-02-04: fixed camera and sensors not working while data partition is encrypted and startup pin is required
2019-01-27: added built-in support for root, fixed Wi-Fi Display (WFD) video (but not audio yet), fixed USB MTP mode, updated GPS HAL and blobs from bq bardock, updated Netmgr QMI DPM (Data Port Mapper) blobs from xiaomi daisy, fixed SELinux labeling for userstore partition which should solve Wi-Fi MAC issues for all YTX703F users, restarting qmuxd when userdata is encrypted, which should fix LTE for YTX703L users with data encryption
2018-12-09: fixed alarms not firing, wifi tethering crashing, temporarily added back support for software dt2w
XDA:DevDB Information
LineageOS 16.0 for Lenovo Yoga Tab 3 Plus (YTX703F / YTX703L), ROM for the Lenovo Thinkpad Tablet
Contributors
vladimiroltean, Quallenauge, matshias
Source Code: https://github.com/Lenovo-YTX703-Devel/env/blob/master/scripts/picklist.sh
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: S000973_180524_ROW
Based On: LineageOS
Version Information
Status: Stable
Created 2018-10-03
Last Updated 2019-03-12

That is so quickly, and i also wondering did Google fired all the previous Android designer? bcz android 9.0 settings ui looks so badddddddddddd?? BTW thx you guys efforts still excited for 16 happened???

Dirty flash possible coming from last 15.1 build?

tombraga said:
Dirty flash possible coming from last 15.1 build?
Click to expand...
Click to collapse
No. If you don't want to get your hands dirty then best just wait for official 16 builds (probably at least 2 months from now).

cartman56 said:
That is so quickly, and i also wondering did Google fired all the previous Android designer? bcz android 9.0 settings ui looks so badddddddddddd?? BTW thx you guys efforts still excited for 16 happened
Click to expand...
Click to collapse
I know right? Maybe by the time the Lineage 16 bringup is over we can do something about it.

vladimiroltean said:
No. If you don't want to get your hands dirty then best just wait for official 16 builds (probably at least 2 months from now).
Click to expand...
Click to collapse
Too much time, i will try it....
so i do wipe of cache date and system, yes and then install the new unofficial 16.0, right?

tombraga said:
Too much time, i will try it....
so i do wipe of cache date and system, yes and then install the new unofficial 16.0, right?
Click to expand...
Click to collapse
Yup but first you have to backup, in case you want to roll back to 15.1

Can it be that the display is quite dark, even with 80% brightness, seems similar to the 15.1 update 2 weeks ago, where something with brigtness was no good.
I know, it´s a beta version now, but brightness should be a must to test the next 2 months....until official, thanks.

Is your issue that the display is dark despite being at max setting (a hardware issue), or rather that the automatic brightness control won't stay at max setting (a framework issue)?

vladimiroltean said:
Is your issue that the display is dark despite being at max setting (a hardware issue), or rather that the automatic brightness control won't stay at max setting (a framework issue)?
Click to expand...
Click to collapse
sorry, but i did not understand very well your comments.
i wanted only to say, that comparing with my last installation 15.1 with 45% brightness, now with LOS 16 seems to me, that 45% brightness is much more darker than before, so i put it on 80% now to have the same. But sure battery will spend more ....
In the meanwhile i could install opengapps 9 nano, magisk 17.1 all with not any problems, i like it very much the new build, thanks a lot... will use it and test it...
concerning dolby atmos: with 15.1 i had successfully installed the dolby-atmos-axon7-oreo installed---do you think i can flash ist also now with the new build?

tombraga said:
sorry, but i did not understand very well your comments.
Click to expand...
Click to collapse
I mean: if you disable automatic brightness control, is the screen any brighter?

vladimiroltean said:
I mean: if you disable automatic brightness control, is the screen any brighter?
Click to expand...
Click to collapse
no, it´s the same.
for me is a similar issue as we had short time ago with 15.1 official rom, when @Quallenauge wrote this:
Thanks, there were some changes in the background made which changes the way how the brightness is controlled to achieve the battery save mode. Maybe there is some tuning needed (if possible).
Other issue: i tried to flash dolby atmos, but got boot loop, so i had to wipe once more all and flash the new build once more.
but could reinstall all my apps with my google account, installing opengapps nano 9 - great thing.
thanks for all

After making a backup I just dirty flashed this release with open gapps nano for 9.0 (arm64) and until now evertything works like a charm! Did wipe cache and dalvik afterwards. Thanks for the update, great work!

vladimiroltean said:
It is my pleasure to announce, together with @Quallenauge, the availability of early access release LineageOS 16 builds for the Lenovo Yoga Tab 3 Plus devices (YTX703F and YTX703L).
To the best of our knowledge, the hardware works and SELinux is in enforcing mode. However, as Lineage 16 bringup is not complete yet, many operating system customizations are not yet available and there might be various minor glitches in the SystemUI.
These builds are of BETA quality and are not intended for stable, daily use yet. Installation is "as usual" - non-specific instructions given intentionally to deter people that are expecting stable software from installing and then complaining about things that are irrelevant at this point.
The purpose of these early builds is to speed up development by figuring out the next top priorities. Today also marks the movement of Lineage 15.1 into maintenance, no-new-features mode, as we are now investing our efforts so that most of you can hop on 16 in the near future.
Status
What works
Boots
Connectivity: WLAN, Bluetooth, LTE, GPS
Backlight control, sensors
Media playback
Camera
What doesn't work or wasn't tested
Encrypted data partition
OpenGapps SetupWizard may crash on first boot. You should be able to move along though.
Downloads
LineageOS 16.0 2018-10-02: [YTX703F (Wi-Fi)] | [YTX703L (LTE)]
XDA:DevDB Information
Unofficial LineageOS 16.0 for Lenovo Yoga Tab 3 Plus (YTX703F / YTX703L), ROM for the Lenovo Thinkpad Tablet
Contributors
vladimiroltean, Quallenauge
Source Code:
LineageOS Gerrit
Proprietary blobs
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: S000973_180524_ROW
Based On: LineageOS
Version Information
Status: Testing
Created 2018-10-03
Last Updated 2018-10-03
Click to expand...
Click to collapse
Can't wait for it to become stable enough for me to use this. Sadly I can no longer spend much time testing and trying things out.
But you guys are doing great work. It's hard to believe such a unknown device is getting so much development and such a great little community and devs.
Cheers

At this moment I have only 2 main issues:
Display missing brightness (too dark)
Sound could be louder, don't want to go to 100 % volume

tombraga said:
At this moment I have only 2 main issues:
Display missing brightness (too dark)
Sound could be louder, don't want to go to 100 % volume
Click to expand...
Click to collapse
I don't know what you're seeing/hearing, but I'm telling you for sure that the backlight brightness fix from 15.1 was integrated in these buils. Also we changed nothing about audio.

Look, what I reported is my impression, no critics and only comparation to 15.1 build, nothing more.
I only want to help, right.

to be sure about my display i restored my Oreo 15.1 backup and then restored again my Pie 16 backup and i confirm that with Pie 16 i have to configure about 80% display rate to have the same clear display as with 40% on Oreo 15.1
I don´t know why, i have automatic display disabled in the 2 builds, so we have the same conditions.
Concerning sound: ok, the comparation was not correct, because in Oreo 15.1 i could use the dolby atmos tool which i had installed.
I will continue with Pie 16 because it is the future and i like it, principally closing open apps works so fine swiping up...
And sure, i hope the display setttings will improve and one day i can get my dolby atmos also installed in pie...:good:

Is there any chance for DT2W in this new Pie build?

tombraga said:
Is there any chance for DT2W in this new Pie build?
Click to expand...
Click to collapse
These unofficial builds are only meant to exist until the Lineage 16 bringup is over and officials start shipping.
There is a 5% chance that my initial estimation is wrong and the touch panel really supports wake gestures at the firmware level. Now that I got a hold of a Synaptics datasheet, I can take some time and read the relevant registers to figure out whether that is the case or not. If it does, I'm glad to add it back. But if it doesn't, I hope it's understandable that I don't want to waste my time again by putting in and testing a temporary feature.
But by any means, do feel free to do that yourself if you want to, the community is not a single person or 2. Patches are here:
- https://github.com/LineageOS/androi...mmit/0ec6b8ceb0090a9a71679ee5521777252d754275
- https://github.com/LineageOS/androi...mmit/f42f856844049418beb322b5e5e6e606ebf4ba0a
- Revert https://github.com/LineageOS/androi...mmit/faaebc3041b4cbaf2f5c6add5dfd8935bb411a42
Build instructions:
- https://wiki.lineageos.org/devices/YTX703F/build

[sGSI 9.0] AOSiP / Pixel Experience / AOSP //Personal Builds [S9/S9+/N9]

If you still want to run an SGSI (we have device specific roms now), I strongly recommend vanilla aosp. It is by far the smoothest and just simply works without issues. I will maintain AOSP for security patches until i'm using device specifics as a daily (still some bugs left). Go for my AEX or POSP now
What is this thread?
This thread is hosting my personal builds of sGSI's. As we don't have stable device specific Pie roms yet I believe this is still in high demand for you people that love AOSP roms and are patiently waiting for development. Until we have a stable device tree (which would translate into stable device specific roms) I will be mainting these builds. Aside from a few minor quirks these builds should work fine for daily usage.
What are the quirks?
For getting bluetooth to work you need a permissive kernel. You can use the magisk module provided in my mega library.
The statusbar padding is a bit off by default (fix is in my library as well)
AOSiP has longer boottime
What ROMS can I choose from?
For now my stable sGSI's are AOSiP, Pixel Experience and AOSP.
What vendor/firmware/kernel to use for what rom?
AOSiP:
S9/S9+ needs BRK3 vendor/firmware and endurance AOSP kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
Pixel Experience:
S9/S9+ needs BRK3 vendor/firmware and endurance AOSP kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
AOSP:
S9/S9+ needs BRK3 vendor/firmware and endurance GSI kernel
N9 needs ARH6 vendor/firmware and endurance GSI kernel
Flashing instructions
1. Wipe everything
2. Flash firmware
3. Flash vendor
4. Flash gsi to system
5. Reboot recovery
6. Flash gapps
7. Flash kernel
8. Reboot
Note: skip step 5 and 6 for roms with gapps included
If you have an issue flashing gapps because of insufficient space, do the following in TWRP. Advanced wipe -> System Partition -> Repair or Change File System and Repair and Resize
Downloads:
This is my MEGA library where I host all the files you need for running your sGSI (and some extras): https://mega.nz/#F!wFFQUYbI!GZvNOBSn1wVn8U9mQDzBiw
Source code
https://github.com/TheCrazyBeaver/device_phh_treble
Credits:
Phhusson for his generic device tree
Codefox for being my main honi, the semi generic device tree and foxytreble
AzzyC for being my second honi
Eamo5 for his godlike endurance kernel
P.S. Note 9 plebs are welcome here but I won't make a thread in Note 9 forum as I don't own the device
XDA:DevDB Information
[sGSI 9.0] AOSiP / Pixel Experience / ViperOS //Personal Builds [S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CrazyBeaver2377, CrazyBeaver2377, CodeFox
Source Code: https://github.com/TheCrazyBeaver/device_phh_treble
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRK3 Vendor / Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2019-02-04
Last Updated 2019-02-11
XDA:DevDB Information
[sGSI 9.0] AOSiP / Pixel Experience / AOSP //Personal Builds [S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CrazyBeaver2377, CrazyBeaver2377, Codefox, Rainbow_Dash
Source Code: https://github.com/TheCrazyBeaver/device_phh_treble
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRK3 Vendor / Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2019-02-04
Last Updated 2019-02-13

reserved

Cheers, moving to your builds from now on mate

Thanks will try it tomorrow

arh6 vendor in Note9 does not install. In Download mode it gives the error : SystemDev Check Fail.Device:2 Binary 1....
Everything else works ok.

I just uploaded AOSiP, beware this is not tested yet by anyone so it might not boot!
Edit: AOSiP reported working!

Nice work I liked it
Please don't stop on this thread and tell us about any updates

"The Guy".
Thanks for all your releases man! PE is awesome along with Viper!
Since we are on the plate of AOSP roms, can we bring Euphoria back?
Or even Hazy / Discovery rom?
Thank you for all your work!

oreo firmware/vendor for a pie rom? didn't understand that though

carlesmc said:
I can`t flash on system ( twrp)
Click to expand...
Click to collapse
What do you mean exactly? You need to press the install image button and then install the system.img to the system partition.

here
edit
awesome job man

CrazyBeaver2377 said:
What do you mean exactly? You need to press the install image button and then install the system.img to the system partition.
Click to expand...
Click to collapse
I get the following error:
Cannot flash images to system

Thanks beaver! Awesome to see you publishing your work here too // macke @ teleg

Finally something new and fresh, good work ? don't give up !

What do you think about ResurrectionRemix v7.0 Pie?
Have you tried it?
Sent from my SM-G965F using Tapatalk

carlesmc said:
I get the following error:
Cannot flash images to system
Click to expand...
Click to collapse
You might need to upgrade to latest TWRP

a0007 said:
What do you think about ResurrectionRemix v7.0 Pie?
Have you tried it?
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
I build what I personally like, hence personal builds. And to be honest I don't like RR (overfeatured)
If there is high demand for one particular rom I might build it and drop one that is in low demand.
As I don't want to use up too much storage and time fixing build errors I want to stay with 3 ROMs maximum.

carlesmc said:
I get the following error:
Cannot flash images to system
Click to expand...
Click to collapse
Its weird and I've had it before, just don't erase system before trying to flash, just do a factory reset, then flash the image over system, I had that error but using this works every time

CrazyBeaver2377 said:
I build what I personally like, hence personal builds. And to be honest I don't like RR (overfeatured)
If there is high demand for one particular rom I might build it and drop one that is in low demand.
As I don't want to use up too much storage and time fixing build errors I want to stay with 3 ROMs maximum.
Click to expand...
Click to collapse
Aosip working nicely on S9 here mate:good::good:

Thanks for you work , I'll flash viperOS on my N9 later tonight, thanks again.

[ROM][10.0][A2017x][UNOFFICIAL] LineageOS 17.1

​
First off wanted to thank ALL friends who were involved creating this Q for our beloved axon7. It took us a long time but we made it :highfive:​About Lineage OS:
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Instructions:
Attention! The bootloader needs to be unlocked!
0. unlocked, suited twrp ( i'm using twrp3218), oreo bootstack (i'm using universal one) of your choice...you know the drill, preferable already on a custom Pie rom
1. Copy LineageOS zip, optional gapps 10.0 ( i'm using nano) and magisk 20.4 to your device
2. Boot into twrp recovery (first backup your existing stuff)
3. Wipe cache, system, vendor & data
4. Flash ROM
5. Flash gapps (optional)
6. Flash Magisk 20.4 (optional)
7. Reboot and enjoy !
BUGS :
* camera may not be working on first boot, if so reboot a couple of times and it will
What is CAF?
Code Aurora, a Linux Foundation Collaborative Project, hosts tested open source software code needed to provide upstream enablement for innovative, performance optimized, network connectivity and related ecosystems to support system on a chip (SoC) products. It also serves as a staging area for open source code that is submitted to various upstream projects such as the Linux kernel and Android. CAF also mirrors key upstream projects for use by the community.
Sources, Changes, & Wiki:
Source | Changes | Axon 7 Wiki | Lineage OS
Credits:
@king1990
@runninghamster
@lightvortex
@raystef66
and all testers
Download : LATEST 17.06.2020 LineageOS 17.1 for axon7
Source Code: https://github.com/LineageOS/android
Kernel Source: https://github.com/OrdenKrieger/android_kernel_zte_msm8996
ROM OS Version: 10.x
ROM Kernel: Linux 3.x
ROM Firmware Required: O bootloader + region modem
Based On: LineageOS
Sec. Patch : 2020-05-05
Version Information
Status: pre-stable
Created: 2020-05-31
Last Updated: 2020-09-17

:good: good job

lightvortex said:
:good: good job
Click to expand...
Click to collapse
Thank you ! It's you who made the final touch after we booted

Good work?

Made a new module for reverting buttons : A2017X_Q_softkey_reverse_module
You can do it manually though too : https://forum.xda-developers.com/axon-7/themes/mod-soft-key-reverse-using-synapticsdsx-t3827574

somebody still cares axon 7... that's incredible

Guys, this is amazing! Thanks so much to everyone involved.

wow, that's amazing! Thank you guys so much for keeping our beloved Axon 7 alive. ?

Yea buddy!

Awesome work guys! I know you worked hard on this, and have been very kind and patient to those who kept asking about Q. Most of them anyways.

Wow! Thank you ray and king1990, runninghamster and lightvortex!!! I'll be trying this soon! (Even though this says pre stable, can anyone comment how close it is for a daily driver? I do need stability so I need to know what little bugs they're might be)

Thank you for the awesome job! You guys are amazing.

Thanks @raystef66 for keeping this awesome device alive.
I am still on SL!M8 B04 but as soon as Android 10 runs stable, I am going to change.

Holy [email protected] My axon is invincible!! Great job guys[emoji106]
Sent from my ZTE A2017X using Tapatalk

great.. thank for awesome work guys

@raystef66
can we have access to device tree source code.

Thanks for the great work. Pretty stable rom but I couldn't get 24Bit 192kHz Hi-Res audio output. Tried different players and their DSP engines, disabled LOS AudioFX from start but device keeps downmixing audio to 16 bit 48Khz.

Hey folks, I could use some help. Trying to install but having some issues. I'm coming from Lineage 16.0(treble). Already on O bootloader, have vendor partition and TWRP 3.2.3. I perform the recommended wipes.
The install goes well, I then install GApps Arm64 nano, then magisk v20.4.
Now, when I try to reboot, the normal screen appear but then the screen goes black and the red error light comes on. I can't get it past this.
Any ideas what I need to do different?
Thanks in advance.

A great Rom to be in Axon 7. Thanks and big salute for the hard work to developers. However, the navigation gestures are not working in Chinese version of Axon 7. Also, nav bar modules are not working either. Hope this is reported in future builds. Thank you once again. Great ROM.

Battery on Lock-screen
Great build so far. Seems to be good on the battery use too. For some reason my lock screen wasn't showing battery charge and i had to go into the "battery percentage" settings to get it to show.

[ROM] [UNOFFICIAL] [7.1.2] LineageOS 14.1 [20-11-2021]

DISCLAIMER:
1. If you don't know anything about custom ROMs please don't install this ROM.
2. If anything happens to your phone, or you brick your phone after installing this ROM, I will not be responsible for any damage whatsoever.
3. Your phone warranty may be void.
NON-LINEAGE CHANGES:
1. Native signature spoofing support is there. Can be granted to apps in settings.
2. Cloudflare(1.1.1.1) is now the system-wide DNS instead of Google DNS(8.8.8.8).
3. Motion Sensor permission will be asked when an app makes a request.
4. Although the Security Patch Level is still shown to be June-05-2021(read more here), all possible security fixes have been merged till Nov.
PREREQUISITES:
1. Officially unlocked bootloader.
2. Latest TWRP installed.
FLASHING PROCEDURE:
1. Reboot to recovery
2. PERFORM FACTORY RESET
3. Wipe Cache, System, Dalvik
5. Flash ROM
6. Flash Gapps(or use microG)
7. Reboot system
P.S.- Keep in mind that I merely followed the guide and did accordingly. I am not a ROM dev or anything. Thus, I can't fix any bugs that you may face.
I will try to update the ROM, at least, once every 3 months.
Download Link- https://sourceforge.net/projects/li...e-14.1-20211120-UNOFFICIAL-kenzo.zip/download
Device Tree:
GitHub - kodeaqua/device_xiaomi_kenzo: Default device tree for Kenzo. Making it compatible for AOSP ROMs.
Default device tree for Kenzo. Making it compatible for AOSP ROMs. - GitHub - kodeaqua/device_xiaomi_kenzo: Default device tree for Kenzo. Making it compatible for AOSP ROMs.
github.com
Kernel Source: https://github.com/magicxavi/kernel_xiaomi_msm8956
ROM source: https://github.com/LineageOS and https://github.com/syphyr
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Lineage OS
Security Patch Level: 5 June 2021

k

kk

This is just what I wanted. My father is using my Kenzo since the last 2 years and the little issues in P+ ROMs weren't something that he could deal with. So I had installed AEX 4.6 by Magicxavi. But it was EOL in Feb 2020. For updated security patches my only other option was LOS 14.1 by e/foundation which wasn't what I wanted as it had microG built-in causing several apps to not work/crash. Plus active drain in Nougat is 10-12%/h vs 15-16%/h in Pie+ and multitasking is way better as RAM usage is much lower. Gonna try this when I return home next.
Thanks.

thanks bro..

What about the three-month update?

qmag said:
What about the three-month update?
Click to expand...
Click to collapse
Can't. My exams are ongoing. proly won't be updating until next month

Tested the build over the last few days. Seems stable enough. Battery backup seems decent. Little over 13%/h AD and 0.6%/h ID, primarily web browsing and WA. It could be better as Jio coverage, despite LTE-CA, isn't really good indoors compared to Vi in my locality. RN3 is now being retired as a primary device in favour of RN10 Pro.
One issue I have noticed (which could be related to something at my end) is that the home screen seems to sort of redraw everytime I go back to it from any app. It's quite jarring.
Edit: Goodix fingerprint sensor doesn't work.