Resurrection Remix the ROM based on Lineage, Slim, Omni and some original code. see http://www.resurrectionremix.com/
for
Samsung Galaxy Tab S2 8.0 Wi-Fi (2016) - SM-T713 (gts28vewifi)
Samsung Galaxy Tab S2 8.0 LTE (2016) - SM-T719 (gts28velte)
Samsung Galaxy Tab S2 9.7 Wi-Fi (2016) - SM-T813 (gts210vewifi)
Samsung Galaxy Tab S2 9.7 LTE (2016) - SM-T819 (gts210velte)
have fun, no guarantees, there's always the sun (for at least some time from now)
Requirements:
- might need to update to latest stock beforehand, reports indicate that eg. T713 bootloader needs to be updated to version T713XXU2BQCO (or newer)
- twrp 3.2+ (https://twrp.me/Devices/Samsung/)
- backup everything before install to be on the safe side
- wipe system, data when upgrading from another ROM
Install:
- flash RR-O-v6.x-<date>-<model>-Unofficial.zip in TWRP
- flash gapps (arm64 8.1) if you want them (see Gapps note below) - https://opengapps.org/
- flash Magisk 17.2+ if needed - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
- wipe both Dalvik Cache and Cache
Gapps note:
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you might need to factory reset and then install them again, otherwise expect FCs. Deleting storage (in Settings/Apps) for Google Play Services, Store, Google Services sometimes helps.
Not working:
T719/T819 - no SIM card detected, reason so far unknown
Known issues:
- brightness slider has no effect when auto is on
Downloads:
https://androidfilehost.com/?w=files&flid=285385
or
https://mega.nz/#F!fzx1DYyR!EgydB9zxLVABMHklYjtKdw (30 day retention)
Sources:
https://github.com/ResurrectionRemix
https://github.com/bdhay
Thanks:
@LuK1337, @luca020400, the teams of LineageOS, Resurrection Remix, Omni, Slim, @Icewyng, @orfik building RR 6.x for T713/T813 previously
Wanna do it yourself, here is how i did it:
1. setup build env on a debian box as described here (via scripts) https://github.com/ResurrectionRemix/platform_manifest#refer-to-scripts-to-setup-build-env
2. created build folder, repo init, repo sync as described here https://github.com/ResurrectionRemi...r-where-the-rr-repo-will-be-stored-and-synced
3. (new) updated attached roomservice.xml contains all modified repos. simply place it in .repo/local_manifests/
continue with step 6.
3. added
.repo/local_manifests/roomservice.xml
(attached) to make the device known
4. ran repo sync again to include repos for this device
5. added device/samsung/gts210vewifi/rr.(dependencies,mk) (see github device trees) to RRify the just downloaded device tree
6. setup ccache https://github.com/ResurrectionRemix/platform_manifest#setting-up-ccache
7. tune jack https://wiki.lineageos.org/devices/gts210vewifi/build#configure-jack-1
8. init environment
Code:
source build/envsetup.sh
9. check if device is there
Code:
breakfast gts210vewifi
and finally
10. start build
Code:
brunch gts210vewifi
Changelog:
2018-11-11
- refreshed sources
- fixed button backlights and reassignment [via ugly Settings hack]
2018-11-06
- refreshed all sources
- push RRified device trees and Settings app to https://github.com/bdhay
- ported multicolumn settings dashboard from Omni
Frequently asked questions - FAQ
Q: How's idle time battery life?
Does this ROM have the same battery drain (when idle) issue as current Lineage builds?
the ROM is lineage 15.1 based and has no custom kernel, so if there is a drain it most likely exist here as well.
reports show that having a t813 laying around it loses maybe 10-15% a day. you can do the math.
No exynos device i see. Is really that hard developing for them, i know
Thank you friend for providing this for us.
I haven't yet flashed a ROM on this tablet, mainly due to battery usage concerns. However that's not based on first hand knowledge.
Cheers
tweeny80 said:
Thank you friend for providing this for us.
I haven't yet flashed a ROM on this tablet, mainly due to battery usage concerns. However that's not based on first hand knowledge.
Cheers
Click to expand...
Click to collapse
as this ROM is mainly the continued version from there, see
https://forum.xda-developers.com/showpost.php?p=77839604&postcount=293
Guys, so far this is the best build! Everything works perfectly. Thank you for the excellent job!
gabatsek said:
Guys, so far this is the best build! Everything works perfectly. Thank you for the excellent job!
Click to expand...
Click to collapse
on which device?
Thank you very much indeed...nice to jump to Oreo on the T819 device...
Thank you for this. It has been awhile since I tried RR. This one is exceptionally smooth and quick. Only thing I've noticed that isn't working (for me) is whenever I close up the cover on my T813 the screen doesn't shut off. I have to tap the Power button to turn it off. Not a big deal, just wondering if there is a setting somewhere that I'm missing??...like I said, I haven't used RR in a while, and maybe this was an issue before...I just don't remember.
LDBAKE said:
... Only thing I've noticed that isn't working (for me) is whenever I close up the cover on my T813 the screen doesn't shut off. I have to tap the Power button to turn it off. Not a big deal, just wondering if there is a setting somewhere that I'm missing??...like I said, I haven't used RR in a while, and maybe this was an issue before...I just don't remember.
Click to expand...
Click to collapse
what's your device?
yeah, for some weird reason is FlipFlap, the LineageOS app for this, not included per default. will include it in some next build and you can report back if it enables the cover on/off. check the changelog i'll mention it.
How's idle time battery life? I'd love to give this a try!
Thanks!
Cheers,
Rich
Sent from my SM-T810 using Tapatalk
Hmm... this looks really interesting, actually I think this is great news for T819 owners (very little for us around so far).
Can anyone please confirm that phone, mic and bluetooth work fine in the T819?
gabatsek said:
Guys, so far this is the best build! Everything works perfectly. Thank you for the excellent job!
Click to expand...
Click to collapse
T719?
rholm said:
How's idle time battery life? I'd love to give this a try!
Click to expand...
Click to collapse
added this question to a FAQ in the 3rd post
T713
thanks alot for this rom - it solved my problems with t719 and DJI aircraft.
i have noticed the hotspot option is missing from T719 however. is this expected?
coalisgood said:
thanks alot for this rom - it solved my problems with t719 and DJI aircraft.
i have noticed the hotspot option is missing from T719 however. is this expected?
Click to expand...
Click to collapse
not intentionally, no. can't check it though, no lte version at hand.
is it missing as Quick Settings button only or also in the Settings app?
buddhay said:
not intentionally, no. can't check it though, no lte version at hand.
is it missing as Quick Settings button only or also in the Settings app?
Click to expand...
Click to collapse
it is missing in both locations. i am on a workaround now using WIFI direct and pdanet+ app.
The hotspot option is unavailable both in the quick settings and the main settings. Oh, and SIM cards are not detected. My tablet is a T719.
Apart from these bugs, this build is excellent; snappy, with a million and one configuration options, which I particularly like.
Related
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications.
Prerequisites for Installation
- Must have an unlocked bootloader
- Must have working TWRP
Known Issues
- MINOR - On Apollo there is a small glitch in rotation animation when screen transitions between on->off state
- MEDIUM - Bluetooth, GPS and LTE need to be debugged
Tips
- For ROOT ACCESS see Question 1 on the Frequently asked questions
Fresh Installation
- Factory Reset
- Flash the ROM File
- Flash any 5.1, arm 32-bit version Open GAPPS of your choice.
- Reboot
- On first boot it will take about 15-30 seconds before the boot animation appears
Upgrading to new Version
- Flash the ROM File
- Reboot
Downloads
- APOLLO rom
- THOR rom
- GAPPS
Source Code
- Kernel Source and Device Trees are here.
Credits
- Cyanogenmod
- CodeAurora
- Hashcode
- Cpasjuste
- dpeddi
XDA:DevDB Information
SlimLP, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader Only
Based On: Slimroms
Version Information
Status: Beta
Created 2015-09-04
Last Updated 2019-10-02
Release Notes / Changelog
2015-09-04
- Initial Release
- Kernel:
Based off Amazon Stock 4.5.5 for which we don't have the commit history so I have manually by hand done all the updates.
Rebased MDSS MDP Driver from CAF branch LA.BF.1.1.1.c4-03300-8x74.0
Upgraded a lot of code from the same CAF branch
More features coming soon
2015-09-05
Temporary Fix for Thor screen not coming out of standby correctly
Still a tiny bit more work needed in kernel for mdss mdsp driver
2015-09-15
Rebased mdss driver now fully working on Thor
Kernel has had a lot of work, see bitbucket page for changes
RRO Layers 2.1 have not been merged yet
Tried to cherry pick RRO Layers commits but received bad object errors
Updated to latest Slim 0.7 BETA code
Bluetooth is under investigation, sees devices but doesn't seem to pair
Switched bluetooth libs to been built from source
GPS is untested
LTE is untested
Battery Stats still needs to be fixed, needs investigation
2015-09-21
Update SlimLP code
Enable Sim Toolkit
Made changes based on provided logs to try to enable LTE
Recommended Gapps is now Open Gapps, linked in the OP.
2015-10-27
Update SlimLP Code
2015-11-07
Update SlimLP Code
2016-05-02
Updated kernel to the lastest CAF branch
Updated to latest SlimLP Code
Build bluetooth stack from source
Still working on Bluetooth - passkey pairing seems to be broken
Frequently Asked Questions
Question 1:
How do I get ROOT access?
Answer:
- Unlock developer options: "Settings" ➜ "About phone" ➜ Tap the build number 7 times
- Go back to "Settings" ➜ "Developer options" ➜ "root access" ➜ choose your desired option
Thank you so much for your and other developers hard work!
Will try this rom and give you a feedback ...
Hi, I wanna give you a quick feedback after 1 hour on the thor rom...
1) after the installation (did a factory reset) it comes with a bluethoot error and the service doesnt work.
I did a restart and switched it on ... off ... on ...off the first and secound time bluethooth seems to work (but did'nt make a link) but after that the service didnt come back.
2) After I switch off the display I have to reboot to get it back. So I only get a blackscreen with backlight.
3) Rotation works well but a few apps rotate in the wrong direction. But this is not a big thing!
4) Batteryusage didnt show apps and the graphic locks buggy
this are my first impressions
cocoon
cocoon4u said:
Hi, I wanna give you a quick feedback after 1 hour on the thor rom...
1) after the installation (did a factory reset) it comes with a bluethoot error and the service doesnt work.
I did a restart and switched it on ... off ... on ...off the first and secound time bluethooth seems to work (but did'nt make a link) but after that the service didnt come back.
2) After I switch off the display I have to reboot to get it back. So I only get a blackscreen with backlight.
3) Rotation works well but a few apps rotate in the wrong direction. But this is not a big thing!
4) Batteryusage didnt show apps and the graphic locks buggy
this are my first impressions
cocoon
Click to expand...
Click to collapse
- To be honest I developed this on apollo
- Didn't really test much on thor so probably problems in the kernel causing blackscreen for thor
- seems to work flawlessly on apollo
- will look into thor issues before next build
- thanks for the early feedback
- updated op known issues
Sent from my Fire Phone using Tapatalk
Thanks!
Excellent work @ggow, I just dirty flashed Apollo version, and must say I am pretty impressed, everything vent smoothly, the only FC I get was from clock app, but that was expected... :good:
Is there any recommended xposed version working with this ROM?
So far I found one small graphic glitch, you can see it on attached picture (you can see only half of the first notification)...
OK that's all for now, going to test how fast this can burn through hdx battery, so far every LP ROM I tested on my phones was really power hungry...
I've tried this ROM.. smooth as hell...
but if I not geting wrong, no LTE...( I am on Apollo)
Is that right? Or I made something wrong...
jeryll said:
Excellent work @ggow, I just dirty flashed Apollo version, and must say I am pretty impressed, everything vent smoothly, the only FC I get was from clock app, but that was expected... :good:
Is there any recommended xposed version working with this ROM?
So far I found one small graphic glitch, you can see it on attached picture (you can see only half of the first notification)...
OK that's all for now, going to test how fast this can burn through hdx battery, so far every LP ROM I tested on my phones was really power hungry...
Click to expand...
Click to collapse
- thanks, glad you like it
- I wouldn't recommend xposed with this rom. May not play nice as aosp
ka_putt said:
I've tried this ROM.. smooth as hell...
but if I not geting wrong, no LTE...( I am on Apollo)
Is that right? Or I made something wrong...
Click to expand...
Click to collapse
- I didn't think LTE would work
- that's gonna be a separate debugging exercise
How's Bluetooth? I know CM12 has some issues.
EncryptedCurse said:
How's Bluetooth? I know CM12 has some issues.
Click to expand...
Click to collapse
- Bluetooth will probably also need a bit work
ggow said:
- I didn't think LTE would work
- that's gonna be a separate debugging exercise
Click to expand...
Click to collapse
Ah OK. Good to know..
:good:
New Build For Thor
- This temporarily patches the problem on Thor with the screen not coming out of standby properly
What is the difference between this and the CM12 one that was updated the 15th of August?
DarkenedMatter said:
What is the difference between this and the CM12 one that was updated the 15th of August?
Click to expand...
Click to collapse
- Best to try it and find out.
- New kernel based on and modified from Stock 4.5.5 and latest MSM8974 CAF branch
- Rebased MDSS kernel driver is fully functional on Apollo Devices
Does the Apollo support otg? I just plugged my USB otg from my nexus 6, but stick mount says there isn't anything that needs mounted,
holeshot77 said:
Does the Apollo support otg? I just plugged my USB otg from my nexus 6, but stick mount says there isn't anything that needs mounted,
Click to expand...
Click to collapse
- OTG support isn't available at least at the moment.
- Not completely certain what the story is with OTG on Apollo and Thor
- I have seen various comments about this
- Some have said it might be a limitation of the hardware or a limitation imposed from the bootloader.
- Needs investigating to be sure of what can be done.
well xposed for LP actually works
ggow said:
...
- I wouldn't recommend xposed with this rom. May not play nice as aosp
Click to expand...
Click to collapse
I just had to try it and it's working! :laugh:
So if anyone wants to try xposed for lollipop, go for it (make sure you don't have any "xposed leftovers" from KitKat like me (gravity box i. e.) and uninstall them first)
be sure you did nandroid backup in TWRP before you flash xposed for lollipop in TWRP (yes, framework needs to be flashed)
I used xposed-v73-sdk22-arm.zip
Reboot into ROM and install XposedInstaller_3.0_alpha4.apk
That's it, happy hacking...
YouTube in FullHD
And I don't know what magic @ggow did this time, but we finally have here YouTube app where we can choose 1080p streaming ! Yay! This just made my day!
Or Google finally allowed this for every mobile users in latest YouTube app? Anyone on CM11 or Nexus 4 can check if its there too?
LineageOS 14.1
Credits:Samsung Galaxy Note 10.1 - Samsung Electronics
Android 7.1.2 - Google Inc.
@lirokoa - Making the device source code & kernel source code
Requirements:twrp-3.0.2-0-n801x.img
Questions:Why isn't the keyboard showing?Answer: You have to go to Settings --> Language & Inputs --> AOSP Keyboard --> Make sure to set as 'Always show' or something like that.
Download:https://www.androidfilehost.com/?w=files&flid=283165
Sources:
Code:
LineageOS 14.1: [url]https://github.com/LineageOS/android/tree/cm-14.1[/url]
Device source code: [url]https://github.com/lirokoa/android_device_samsung_n8013/tree/cm-14.1[/url]
Device kernel source code: [url]https://github.com/lirokoa/android_kernel_samsung_n80xx/tree/cm-14.1[/url]
ROM status:Testing
- Secretwolf98
Is this rom used for the n8000 model? since the download file only puts n8013
Enviado desde mi SM-G950F mediante Tapatalk
kiran1901 said:
Is this rom used for the n8000 model? since the download file only puts n8013
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
I haven't made it for the n8000, because I don't own the 3g to test things on. But, if I can have a tester, I can make one.
This build is fantastic. Working like a charm. Definitely breathes new life into the Note.
Thanks for all the help. I'd be willing to test newer builds for the 8013 if need be. It's still my daily driver, but I'm always looking forward to testing new builds on it.
SB1990 said:
This build is fantastic. Working like a charm. Definitely breathes new life into the Note.
Thanks for all the help. I'd be willing to test newer builds for the 8013 if need be. It's still my daily driver, but I'm always looking forward to testing new builds on it.
Click to expand...
Click to collapse
Your welcome. I have a ROM I'm testing for this device at the moment. Future updates for this ROM will be happening.
SB1990 said:
This build is fantastic. Working like a charm. Definitely breathes new life into the Note.
Thanks for all the help. I'd be willing to test newer builds for the 8013 if need be. It's still my daily driver, but I'm always looking forward to testing new builds on it.
Click to expand...
Click to collapse
Here is a CM 14.1 build I have out, but I won't be updating CM 14.1
I will be updating LineageOS 14.1, tho. https://androidfilehost.com/?w=files&flid=283169
secretwolf98 said:
Here is a CM 14.1 build I have out, but I won't be updating CM 14.1
I will be updating LineageOS 14.1, tho. https://androidfilehost.com/?w=files&flid=283169
Click to expand...
Click to collapse
All good. I can wait until the next LOS 14.1 build.
secretwolf98 said:
I haven't made it for the n8000, because I don't own the 3g to test things on. But, if I can have a tester, I can make one.
Click to expand...
Click to collapse
I'm happy to be a tester n8000
secretwolf98 said:
LineageOS 14.1
Credits:
Samsung Galaxy Note 10.1 - Samsung Electronics
Android 7.1.2 - Google Inc.
@lirokoa - Making the device source code & kernel source code
Requirements:
twrp-3.0.2-0-n801x.img
Questions:
Why isn't the keyboard showing?
Answer: You have to go to Settings --> Language & Inputs --> AOSP Keyboard --> Make sure to set as 'Always show' or something like that.
Download:
https://www.androidfilehost.com/?w=files&flid=283165
Sources:
ROM status:
Testing
- Secretwolf98
Click to expand...
Click to collapse
I'm glad you have the time to continue what I have started since I don't have the time anymore. Good work
cikenkari said:
I'm happy to be a tester n8000
Click to expand...
Click to collapse
I'll make one later this week or this weekend.
Here is a new ROM test build.
I don't plan on updating this new ROM, so if you decide to download this new ROM, go ahead.
https://www.androidfilehost.com/?w=files&flid=283252
lirokoa said:
I'm glad you have the time to continue what I have started since I don't have the time anymore. Good work
Click to expand...
Click to collapse
lirokoa, your build from last year was great and convinced me to keep my Note for a lot longer. Lots of appreciation for what you did.
Hey sw98, is there a quick way to flash a recovery img without root? I used, I believe, TWRP 2.8.7.0 for flashing your build and it worked perfectly. I'm not rooted, so cannot use the TWRP app from the Play Store, and for the life of me only remember flashing the recovery wayyyy back in the day with Odin.
EDIT: I ask because I wouldn't mind being on the newer version of TWRP that you posted.
Awesome!
Thanks your new Rom, LineageOS 14.1 work fine on N8010.
It seems fixed "settings has stopped" dialog when every boot.
Currently found issue:
-When start stock file manager show "MTP.....host has stopped". I disable it, no errors happened.
-Spen cursor not working.
-Visual touches not working. (In developer options) But I can see it working in the video, using AZ Screen Recorder.
-When open camera first time, device reboot. o_o I disable it and use Camera ICS, though I rarely use tablet camera.
lirokoa said:
I'm glad you have the time to continue what I have started since I don't have the time anymore. Good work
Click to expand...
Click to collapse
Thank you providing Roms a long time. : D :good:
cikenkari said:
I'm happy to be a tester n8000
Click to expand...
Click to collapse
I will release the N8000 build on Saturday (USA time).
unknownman820601 said:
Thanks your new Rom, LineageOS 14.1 work fine on N8010.
It seems fixed "settings has stopped" dialog when every boot.
Currently found issue:
-When start stock file manager show "MTP.....host has stopped". I disable it, no errors happened.
-Spen cursor not working.
-Visual touches not working. (In developer options) But I can see it working in the video, using AZ Screen Recorder.
-When open camera first time, device reboot. o_o I disable it and use Camera ICS, though I rarely use tablet camera.
Thank you providing Roms a long time. : D :good:
Click to expand...
Click to collapse
In terms of the S Pen and the visual touches, I would not know what to do specifically about those (since I don't bother about them personally).
The "MTP Host has stopped" error message can crop up from time to time (I have seen it when I delete apps from the Play Store), but I wouldn't worry too much about it. It has never given me any issues.
For the camera issues you are having - the stock camera that comes with LOS reboots the device when you open it. Have you tried installing the Google Camera (whether from the Play Store or the APK)? It should work (I don't use the Note's camera at all, but I believe I have installed the app on the tablet on the past when using LOS 14.1).
Let me know.
I don't know MTP Host's function, but i don't like his existence,
so i disable it, All the file transfer still work fine (upload, download, install, etc),
No error message have occurred so far.
others issues not important for me too,
just report possible issues,
thx your reply.
Wow is this the start of a new dawn for my old friend galaxy note ? I really wanted Nougat to continue and be stable for this device.
secretwolf98 said:
I'll make one later this week or this weekend.
Click to expand...
Click to collapse
Thanks alot - i´ll give it a try with my oooold n8000
Awesome! Some updates going for this stone age old device.
I don't assume you have any plans to work on Oreo 8.1? While Android GO might be awesome in this device, getting the old hardware running might be impossible.
THERE WILL BE NO MORE UPDATES HERE!
This thread hasn't been updated in a while as I'm working on mainline support and a kernel 5.10 release for the Note 10.1. There are excellent releases of Android 9+ from @html6405 now and I don't intend on updating this thread. I'll leave everything as is, but don't expect me to view this thread on a regular basis. Most questions are already answered, use the search.
For the new mainline kernel version, please don't ask for any ETAs, there's still some things to be fixed before there will be an official release and I have a normal life to take care off.
If you have experience with kernel / ROM development and want to help me out? Leave me a message, I'd appreciate any helping hand no matter how much you can contribute, every little bit helps. Even looking at the device tree and giving me hints would be great as I would still consider myself being intermediate at best at putting everything together, it's just a lot to dig into with the little time I have.
=====================
Code:
/*
* Your (expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi, I'm currently trying to get this device officially supported again as I really love it and it never let me down in the last 5 or so years. It still works amazingly fast and I have no need to replace it with anything else.
As I'm a Java engineer for my day job there is a lot of new stuff here, I had some contact with C/C++ when I studied CS a couple of years ago but never actually wrote anything bigger than two or three files in these languages. This is quite an adventure and I learned a lot already but I'm open for any help you can offer. After all, I'm doing this for fun and getting better at whatever hits me in the face while doing it.
Current Status
Frozen - No further development!
Working
Audio
Video
Bluetooth
GPS
Hardware Acceleration
SELinux
Sensors
IR
RIL (N8000)
Wifi (98% of the time?)
Partly working
Camera (use OpenCamera, zoom and focus not working currently)
Setup Wizard: Voice Match installation screen has wrong rotation
MTP (occasionally crashing)
Not working at all
RIL (N8020)
Reporting Bugs
Please provide logcat, dmesg, kmsg, steps to reproduce or whatever is appropriate to help me understand the issue.
Here is a link to help you help me: How To Logcat
Source Code
Device #1: n8000
Device #2: n8013
Device #2: n8020
Common: n80xx-common
Common: p4notelte-common
SoC: smdk4412-common
SoC QC: smdk4412-qcom-common
Kernel: smdk4412
Hardware: samsung
FAQ
Q: Why another thread?!?
A: The ROM provided by @lirokoa is great but it is based on sources that deviated quite a lot from the official LOS repo, I try to close this gap and get the ROM aligned to the remaining devices based on the SMDK4412 core so that everbody profits from the development going on there. This ultimately means that we can get a 8.x alpha version "soon" after fixing the remaining issues.
Q: How can I help to improve the ROM?
A: If you are a developer, I'd be happy to discuss the remaining issues with you and how to approach/solve them. I'm open for pull requests on Github. If you are testing the ROM and can provide log files for issues this is also a great thing, even more so if it is one of the devices I do not own.
Q: What's up with the performance?
A: Disable Live Display, it's actually not supported by the GPU (or at least by the current driver)
Q: The camera is crashing!
A: Use Open Camera
Q: Wifi attempts to connect but never succeeds!
A: Try reflashing again, including wiping. This usually fixes it.
Credits and Thanks
all the people that worked/are still working on the smdk4412 device and kernel source code, this wouldn't be possible without their hard work!
the guys from #lineageos-dev channel for helping me out with my questions
all the people posting helpful guides in various sections all over the forums
@lirokoa for the updates and support that helped this device to live on until today
XDA:DevDB Information
LineageOS 14.1 N8000/N801X/N8020, ROM for the Samsung Galaxy Note 10.1
Contributors
Don Carnage
Source Code: https://github.com/Viciouss?tab=repositories&q=android
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Beta
Created 2018-12-28
Last Updated 2019-11-28
Updates
Build N6 (12.03.2019)
Bluetooth for the N8020
Reactivated pegasusq boost
Set maximum volume from 5 to 7
Platform Security Updates (03/19)
Build N5 (15.02.2019)
Enabled IR sender
SELinux rule cleanup
Added N8020 support!
Build N4 (21.01.2019)
Fixed Power HAL permission issues
Eliminated some warnings from logcat (camera and boost related)
Camera shouldn't crash anymore
Build N3 (07.01.2019)
Fixed the video playing issues
Build N2 (31.12.2018)
N801x now available!
Basic camera support, some problems with video
Activated CPU Power Management
Streamlined some kernel parameters with other configs for the same board
Build N1 (29.12.2018)
Make the Note 10.1 great again!
Lots of device file adjustments
Fixed keyboard not showing up initially
Fixed Settings app crash
Installation
use TWRP files from the link below!
coming from stock: flash TWRP TAR.MD5 file via Odin (I used 3.12 for this) or Heimdall (latest)
TWRP already installed: flash TWRP IMG file via TWRP
boot into recovery
wipe cache + dalvik/art
coming from stock/another rom: wipe system + data
flash ROM first, then GApps without rebooting the device
wipe the cache again just for fun
Need Root for Apps?
go to https://download.lineageos.org/extras
download the addonsu-14.1-arm-signed.zip package
open TWRP and flash it via the Install button
TWRP
TWRP got it's own thread, click this link to get there.
ROMs
ROM N8000 - Build N6
ROM N801x - Build N6
ROM N8020 - Build N6
Open GApps
Click me (ARM - 7.1 - don't use FULL as there is not enough space to install it - try micro or lower instead)
Archived Downloads
ROM N8000 - Build N5
ROM N801x - Build N5
ROM N8020 - Build N5
-
ROM N8000 - Build N4
ROM N801x - Build N4
-
ROM N8000 - Build N3
ROM N801x - Build N3
-
ROM N8000 - Build N2
ROM N801x - Build N2
-
ROM N8000 - Build N1
Wow!
thank your development for this old Pad.
will try it in a free time.
: )
Downloading. Will post some feedbacks later. Thanks for continuing the development on this old brick. ?
i couldn't get secretwolf98 version to install on my n8013 so i am keen to see if this one will install for me when the n801x version is ready
There is a new build with basic camera support, the back camera has some issues with recording videos which will crash your camera app. I noticed that activating the torch while having the camera app open in the background/foreground will also crash the camera app, so still some issues there.
The work on the camera will go on after the big party, I wish everyone a good start into 2019
I still use 2 of these and thank you for getting back into it. Using lineage 14.1 now. Will keep watching.
Great. I've just incidentally gone back to this forum after a long time to check if there's any newer ROM than lirokoa's for my N8000
I'll check it out. Thanks a lot
Got it all installed - but can't get over an error code 190 ("can't download app")when trying to install chrome. Unsure if this is rom related or gapps related.
Also flashed the 14.1 su package - works well with the rom as expected. Youtube from the play store does not work - plays audio but no video. Other than that as I play with this I'll see if I can find any other bugs. Really appreciative of you picking this up!
Thank you very much for continuing the development of this tablet!
My N8000 is presently running on lirakoa's latest build lineage-14.1-20170810-UNOFFICIAL-n8000 with open gapps micro and as root solution Magisk 18.0.
Recovery is TWRP 3.02.
Everything is working fine except the well known bugs, and it seems that most of these have been fixed in your latest build.
I've never tried video recording with this tablet but had some camera crashes recently when using the ClearScanner app, in fact it's not usable with this app.
Otherwise I think it's usable as daily driver, and it was.
My daughter used it for university until recently.
So, as far as I understand, your build should be on the same level and I'm gonna try it very soon.
Do you think a dirty flash could work?
thepolish said:
Got it all installed - but can't get over an error code 190 ("can't download app")when trying to install chrome. Unsure if this is rom related or gapps related.
Also flashed the 14.1 su package - works well with the rom as expected. Youtube from the play store does not work - plays audio but no video. Other than that as I play with this I'll see if I can find any other bugs. Really appreciative of you picking this up!
Click to expand...
Click to collapse
Thanks for pointing those out, I'll have a look at it later today.
curiousde2002 said:
So, as far as I understand, your build should be on the same level and I'm gonna try it very soon.
Click to expand...
Click to collapse
Not quite yet, lirokoa put some effort in the ROM and there are probably things that I don't know about yet which are broken. See my last quote above for example. I'm still learning the inner working of the linux kernel and Android which is quite a huge task.
curiousde2002 said:
Do you think a dirty flash could work?
Click to expand...
Click to collapse
It could work but there is no guarantee as always. There are some changes here and there which can potentially break it.
Don Carnage said:
Thanks for pointing those out, I'll have a look at it later today.
Click to expand...
Click to collapse
The 190 issue was fixed with a reflash and and formatting my system. Took 3 times - not sure but I think it was on my end. The youtube however is still at issue. I was able to view in browser w/o issue though. It is just the app. Side loaded a bunch of older APKs of youtube with same result.
thepolish said:
The 190 issue was fixed with a reflash and and formatting my system. Took 3 times - not sure but I think it was on my end. The youtube however is still at issue. I was able to view in browser w/o issue though. It is just the app. Side loaded a bunch of older APKs of youtube with same result.
Click to expand...
Click to collapse
I can confirm your observations. Chrome is running smooth but the youtube app is only giving me audio with a black video stream.
Don Carnage said:
I can confirm your observations. Chrome is running smooth but the youtube app is only giving me audio with a black video stream.
Click to expand...
Click to collapse
It is really good ROM for N8000! But it seems not all video codecs are switched on in assembly. Except YouTube any IPTV application does not work, there is no video in Instagram (the still image of the first frame only) and in browsers many videos cannot be reproduced too.
Samsung SmartThins and Samsung Galaxy Apps application and is not started too. Sadly, as I remember, only from Galaxy Apps can be install the S-Pen application. By the way, somebody knows where to take .apk for Samsung Galaxy Apps? And how to work with the stylus?
Thank you very much for this ROM I'm new here on XDA, however I have recently flash this ROM to my n8013 it's running pretty good, but I have 2 issues so far.
First, I'm having some troubles accessing to my wifi network, I have a Spectrum router which have 2g and 5g but it keep saying that the password may be incorrect, I have try many apps so far changing settings on my router but no success; but when I go with my phone on Hotspot I can get access and establish connection.
I'm also trying to get root access, I already flash the path for LineageOS 14.1 but when I go to developers I can't get access to the manage option. And when I run the root checker app I shows that I don't have root access.
Thanks,
meca42 said:
I'm also trying to get root access, I already flash the path for LineageOS 14.1 but when I go to developers I can't get access to the manage option. And when I run the root checker app I shows that I don't have root access.
Thanks,
Click to expand...
Click to collapse
Have you tried Magisk for root already?
NikoNik7 said:
It is really good ROM for N8000! But it seems not all video codecs are switched on in assembly. Except YouTube any IPTV application does not work, there is no video in Instagram (the still image of the first frame only) and in browsers many videos cannot be reproduced too.
Samsung SmartThins and Samsung Galaxy Apps application and is not started too. Sadly, as I remember, only from Galaxy Apps can be install the S-Pen application. By the way, somebody knows where to take .apk for Samsung Galaxy Apps? And how to work with the stylus?
Click to expand...
Click to collapse
UPD.
Found Samsung Galaxy Apps. It's no S-Pen application too. There is a Google hand-written input. It is possible to cost them also and not to found S-Pen any more.
So, will be great if there is a video's full support and will earn Samsung SmartThins and if earns the IR-port for control of household appliances (now does not work on N8000). After everything it will be a masterpiece!
many thanks for the new build :good:
curiousde2002 said:
Do you think a dirty flash could work?
Click to expand...
Click to collapse
for me it worked
There is an issue with decoding the video stream but I'm not quite sure what's the root cause yet. Still investigating.
Pixel Experience ROM for the Galaxy S9+ and the Galaxy S9
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 9.0
Click to expand...
Click to collapse
This it not a GSI. It is built on actual device trees
What's working/not working?
First up:
-HWC is disabled
-The signalbar always shows 0, altho calling and data have no issue and should work as intended.
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS Pixel Experience. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS PixelExperience.
Click to expand...
Click to collapse
Instructions:
Make sure TWRP has been installed and functional.
Make sure you are on the CSB3 based vendor and fw
Download the latest build linked below
Reboot to recovery
Wipe system, data and cache from the wipe menu
Flash the rom zip(and gapps). DONT flash gapps. they are already included in the rom.
(optionally) flash magisk
Reboot and enjoy :victory:
Downloads:
star2lte S9+ 19.02.2019
starlte S9 19.02.2019
CSB3 vendor HERE
Providing feedback:
You are more than welcome to provide any kind of feedback here.
(limited only to feature requests; it's called "pixel experience" for a reason and it should stay that way)
You can also msg me anytime on telegram @ Rainbow_Alex_Dash
Telegram group?
HERE
Changelog:
19.02.2019
Increased vibration strength
Fixed sdcard issues some people were having
Added walrus's smooth hax (which might be snake oil)
Added vendor version check at boot
Synced kernel sauce with CSB3 (which is now mandatory)
Added fingerprint override in order to pass CTS/safetynet.
Troubleshooting/FAQ:
Q: Videos aren't playing on youtube
A: Make sure you don't have any kind of adblock installed
Q: I'm on a dualsim variant and (a) sim isn't detected.
A: Try reinserting your sim and rebooting. This wierdly nuff only happens on some* dualsim variants and no one has sent me a logcat yet.
Q: My mobile data (3G/4G) is not working/only 3g shows
A: Go into mobile network settings and select/create an apn, also select 4G as the preferred network type.
Q: How does this compare to GSIS?
A: Much better all around. Faster,smoother etc. I don't think there's any reasons to use pie gsis anymore.
Q: How good is the camera?
A: Actually,(by my standards), pretty good. Almost comparable to stock. Ofc the aosp cam doesn't have the fancy filtering, features and stuff but by far not bad. Alot better than 8.1 roms anyway.
Q: Safetynet doesn't pass?
A: Yeah, i guess that's a thing. Go into magisk and download some module called props hide or something. Don't forget to run it from terminal. It should work from there
Q: The rom isn't booting/camera doesn't work
A: Flash/make sure you have the CSB3 vendor and fw, and try again. This has been tested. It's prolly something on ur end.
Q: The rom is in a bootloop/google apps keep crashing
A: You did read the instructions and NOT flash any gapps riighhttt?? smh, wipe /system,/data and /cache and start over
Q: I have another bug; How can i tell it to you while slightly increasing my changes of it ever getting fixed.
A: You can tell me what's going on either here or on telegram WITH A LOGCAT attached(required);if rom isn't booting at all attach /proc/last_kmsg.
Q: I don't know what/how to logcat. Is it really necessary?
A: Logcat or gtfo
Q: How can i support you?
A: Awwww thanks; On most of my posts on the left side there's a "donate to me" paypal button;. Send the seal some fish. Seriously. The seal realllyyyyy loves fish. You can do that,donations are more than welcome, or if you don't have any $ to spare you can also post here about how awesome i am (this surprisingly helps very much)
Credits:
BIG thankies to @Ivan_Meler. He was at the center of all of this, and he single handedly did the pie bringup
Jesec for the initial trees
The pixel experience team for creating the rom we so do enjoy
Many good people from the telegram group (linked above) that helped me create this project and spamming for etas
XDA:DevDB Information
PixelExperience 9.0, ROM for the Samsung Galaxy S9
Contributors
Rainbow_Dash, Ivan_Meler,jesec
Source Code: [url]http://github.com/rainbowdashh[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: CSB3 pie vendor and fw
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-02-11
Created 2019-02-11
Last Updated 2019-02-19
reserved
Yes... yes...yes.... FINALLY!!!! Thank you all developers SO MUCH!
Thanks a lot for your work , i havent found any bugs, its really smooth on my starlte. I´ll donate ASAP.
Is "OK Google" and voicematch working on this ROM?
It's happening boys! Thanks for this rainbow
Thanks for the Rom! Working good
Some things I noticed:
-SD card isn't working. Always says tap to fix
-some animations could be smoother but it's because of the HWC
Great first impression so far.
Thanks again!
Does any kernel work on this rom? This rom is really smooth and very good am surprised" greetings..
Just a quick update:
Mah boi @Eamo5 is cooking up endurance kernel for this, and he claims w it it's much smoother. Idk, i guess we'll wait and see.
Also i've built a couple other roms and will be opening threads shortly
Rainbow_Dash said:
Just a quick update:
Mah boi @Eamo5 is cooking up endurance kernel for this, and he claims w it it's much smoother. Idk, i guess we'll wait and see.
Also i've build a couple other roms and will be opening threads shortly
Click to expand...
Click to collapse
Do you think hwc will be fixable? Maybe Ivan knows a fix
Rainbow_Dash said:
Just a quick update:
Mah boi @Eamo5 is cooking up endurance kernel for this, and he claims w it it's much smoother. Idk, i guess we'll wait and see.
Also i've build a couple other roms and will be opening threads shortly
Click to expand...
Click to collapse
Beta release of Endurance is available in the telegram group. An XDA release will be coming shortly
Eamo5 said:
Beta release of Endurance is available in the telegram group. An XDA release will be coming shortly
Click to expand...
Click to collapse
Looking forward to it!
iamnotkurtcobain said:
Do you think hwc will be fixable? Maybe Ivan knows a fix
Click to expand...
Click to collapse
Maybe. We already have a couple of ideas.
Certainly haven't run out of options yet
what about the battery on daily usage?
i am wondering if its better than the stock which i am getting only 2 to 2:40 screen on time
(and the last question does ambient music work or not?)
(i still did not root or tripped the knox but i am coming from th OG Pixel and i missed stock android and i dont know if it worth it)
No sim card
I restored my EFS and carrier and not work
a0007 said:
No sim card
I restored my EFS and carrier and not work
Click to expand...
Click to collapse
You prolly have the dualsim variant. Can you try removing the simcard tray and rebooting
Dual sim here. Took tray out and rebooted. Only sees the 2nd sim.
Rainbow_Dash said:
You prolly have the dualsim variant. Can you try removing the simcard tray and rebooting
Click to expand...
Click to collapse
Every reboot yes dualsim. I have to removing sim tray and no signal is shown never and mobile data not working at all.
Please can you fix that. I love it because EdXposed work with it.
Sent from my SM-G965F using Tapatalk
I have dual sim and it works.
Some bug report:
1. Gboard sound and vibration disappear every time after restart or vibration mode on/off.
2. Settings menu randomly change its theme form white to black. Killing in recents helps.
3. All system vibrations are f.... You know that
Everything else is pretty smooth though
[ROM][unlocked][mustang] Lineage-14.1 [27 AUG 2019]
Disclaimer
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
LineageOS needs no introductions. This version of LineageOS-14.1 is a highly customised version solely for the Amazon Fire 2019 (mustang)
- IMPORTANT: This ROM only works on devices using the bootloader hack. See <<< HERE >>> to unlock your devices.
- IMPORTANT: Do not update Magisk via the Magisk Manager App, your device will enter a bootloop if you do. Instead update Magisk via TWRP only. If you do this by accident then it is recoverable by just flashing the latest version of the ROM again (with gapps etc as required).
Rules
- Please search the thread before asking questions
- Please try to stay on topic, I know it's not always possible
- Please report bugs here
- Report only one issue per bug report
- When reporting bugs please post a logcat and/or dmesg
Known Issues
- Build new vendor.img done!
- Local video file playback not working
- Vertical Sync needs debugging fixed!
Prerequisites for Installation
- Unlocked Bootloader
- TWRP Installed
Initial Installation
- Enter TWRP
- Enter wipe option
- Format Data
- Then swipe to factory reset
- Copy the ROM to your device
- Copy optional zips like gapps and magisk to device if required
- Flash ROM, then optional zips
- Reboot
- And Enjoy
Upgrading to a new version
- Copy the ROM to your device
- Flash ROM
- If you use Magisk then be sure to flash that again too.
- And Enjoy
Downloads
*** Please do NOT create any mirrors ***
Lineage-14.1 for Amazon Fire 2019 (mustang)
OpenGapps 32 bit arm 7.1
Source Code
- ROM Source: https://github.com/LineageOS
- Kernel Source: https://github.com/ggow/android_kernel_amazon_mustang
Thanks
- @k4y0z and @xyz` for the bootloader hack
- LineageOS
NOTE
This is the link for fixes to address S.O.D (screen of death) issues this rom release has with deep sleep & wifi causing the device not to wake after it enters sleep mode an needs to reboot or unplug battery to respond again.
https://forum.xda-developers.com/showpost.php?p=82247869&postcount=566
This link has a effective temporary fix for screen tearing that some users experience when doing things like scrolling pages etc...
https://forum.xda-developers.com/showpost.php?p=80657025&postcount=263
XDA:DevDB Information
LineageOS-14.1, ROM for the Amazon Fire
Contributors
ggow, Ziona
ROM OS Version: 7.x Nougat
ROM Firmware Required: Unlocked Bootloader
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2019-08-13
Created 2019-08-13
Last Updated 2020-08-07
Changelog / Release Notes
27 August 2019
- Set md32 kernel driver image paths
25 August 2019
- Graphical aspects now smooth as silk
- Now building vendor image, will be flashed as part of the main ROM
- No more complaining on reboot about vendor image
14 August 2019
- Initial Release
- Should be stable
- WiFi works
- Bluetooth works
- Camera works
- Camcorder works
- Everything else needs testing / WIP
- You will get a dialog when the ROM starts complaining about the vendor partition, just dismiss and your good to go.
- Device trees / configs will posted once I have a chance to go through the prototype
New Build is Up
14 August 2019
- Initial Release
- Should be stable
- WiFi works
- Bluetooth works
- Camera works
- Camcorder works
- Everything else needs testing / WIP
- You will get a dialog when the ROM starts complaining about the vendor partition, just dismiss and your good to go.
- Device trees / configs will posted once I have a chance to go through the prototype
Link to a good gapps zip?
delgada89 said:
Link to a good gapps zip?
Click to expand...
Click to collapse
You could use open gapps, you'll need 32 bit arm 7.1 version. I'll update the OP.
Weren't kidding about screen tear. Looking good so far. Will report back issues.
Waiting for device tree. Great work!
Curious if LOS 14.1 variant will be back ported to unlocked Ford and/or Austin? Assume not (perhaps due to older kernel) but wanted to verify.
DB126 said:
Curious if LOS 14.1 variant will be back ported to unlocked Ford and/or Austin? Assume not (perhaps due to older kernel) but wanted to verify.
Click to expand...
Click to collapse
I was planning to go straight to los16 for ford, austin and suez at some point.
I flashed this on my tablet and it works great for the most part. The vertical sync issue is annoying but on some media playback it seems non-existant. The biggest issue I've had so far is that for some reason the tablet appears to die. Every now and then it stops responding to the power button and the display just stays off. Connecting the charger does charge it but nothing comes to life. I have to force shut it down and restart it, and it works again.
detesto said:
I flashed this on my tablet and it works great for the most part. The vertical sync issue is annoying but on some media playback it seems non-existant. The biggest issue I've had so far is that for some reason the tablet appears to die. Every now and then it stops responding to the power button and the display just stays off. Connecting the charger does charge it but nothing comes to life. I have to force shut it down and restart it, and it works again.
Click to expand...
Click to collapse
It might be missing /firmware/md32_p.bin and md32_d.bin.
Sent from my Pixel 3a XL using Tapatalk
Kaijones23 said:
It might be missing /firmware/md32_p.bin and md32_d.bin.
Sent from my Pixel 3a XL using Tapatalk
Click to expand...
Click to collapse
Is that a WIP or is it something I did incorrectly?
detesto said:
Is that a WIP or is it something I did incorrectly?
Click to expand...
Click to collapse
It in wip @ggow will fix that soon
Sent from my Pixel 3a XL using Tapatalk
Traffic not routed through Open VPN tunnel
Hi @ggow,
first of all, thanks a lot for your effort in bringing lineage to mustang. A working custom rom was the only reason for me to purchase an amazon fire
I followed @xyz post to unlock (thanks a lot for that by the way) and flashed your lineage rom.
I used OpenVPN Connect to connect to a vpn server and even though, the connection seems to be successfully established (OpenVPN Connect indicates a successful connection) , traffic is not routed through the vpn tunnel. When visiting different whats-my-ip sites, the "real" ip address is revealed. Please find the logs here: https://privatebin.net/?e1bc0fbde46a0809#CXvsF8SjyjwsqL1CXt6uLu5QAVAg9QKRF21JSxNLssFa
Is anyone experiencing the same problem?
Thanks and regards,
Chris
Same here for both the random black screen problem and the VPN issue. I'm connected to NordVPN, but my IP shows my actual location.
Chris180206 said:
Hi @ggow,
first of all, thanks a lot for your effort in bringing lineage to mustang. A working custom rom was the only reason for me to purchase an amazon fire
I followed @xyz post to unlock (thanks a lot for that by the way) and flashed your lineage rom.
I used OpenVPN Connect to connect to a vpn server and even though, the connection seems to be successfully established (OpenVPN Connect indicates a successful connection) , traffic is not routed through the vpn tunnel. When visiting different whats-my-ip sites, the "real" ip address is revealed. Please find the logs here: https://privatebin.net/?e1bc0fbde46a0809#CXvsF8SjyjwsqL1CXt6uLu5QAVAg9QKRF21JSxNLssFa
Is anyone experiencing the same problem?
Thanks and regards,
Chris
Click to expand...
Click to collapse
lizhitwo said:
Same here for both the random black screen problem and the VPN issue. I'm connected to NordVPN, but my IP shows my actual location.
Click to expand...
Click to collapse
Thanks for the reports, I'll look into the VPN issue and the power issue. I included the md32p and md32d software but suspect that code is not running for some reason and causing the power/blank screen issue.
ggow said:
Thanks for the reports, I'll look into the VPN issue and the power issue. I included the md32p and md32d software but suspect that code is not running for some reason and causing the power/blank screen issue.
Click to expand...
Click to collapse
For blank screen issue look at power.mt81xx.so and power.default.so in logcat or if they're missing.
ggow said:
14 August 2019
- Initial Release
- Should be stable
- WiFi works
- Bluetooth works
- Camera works
- Camcorder works
- Everything else needs testing / WIP
- You will get a dialog when the ROM starts complaining about the vendor partition, just dismiss and your good to go.
- Device trees / configs will posted once I have a chance to go through the prototype
Click to expand...
Click to collapse
Thanks for this! So far everything is working ok. But yeah, a lot of screen tearing with Chrome, etc. Otherwise its pretty cool though!
Yikes. I see what was meant about screen tearing.
Seeing as the CPU is 64bit, what's the likelihood of the being a 64 bit ROM for this device?
I need to further investigate this but I'm fairly sure that the battery drained exceptionally quickly. I only flashed the ROM yesterday and the battery was dead when I looked this morning