Database Develop

[4.4.x][OFFICIAL][NIGHTLIES][UNIFIED][jflte] Omni

DO NOT post in this thread until you have read the first three posts and last two pages of this thread in their entirety!
"Me Too" posts for known issues with no useful debugging information WILL BE REPORTED.
What is Omni?
Omni Gerrit Review
OmniLog - changelog
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
ROM:
Omni for Samsung Galaxy S 4
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
(recommend the MODULAR FULL package, however, keep in mind that the STOCK package is intended for Nexus devices)
UPDATE FROM VARIANT OMNI BUILD TO UNIFIED BUILD
Backup your apps and other pertinent data and DO A FULL WIPE.
Don't complain about it. Just do it. If you try to post bug reports or complaints and you have not conducted a wipe of:
/system
/data
/cache
/dalvik
I will completely and utterly ignore you, as well as report your post for not reading the clearly posted rules at the top of this post.
UPDATE FROM OMNI VIA OPEN DELTA UPDATER
Settings -> System Updates -> Check for update
You will NOT need to wipe anything with the delta updates unless it is explicitly stated or you start having strange issues.
Omni only supports TWRP recovery, use any alternate recovery at your own risk.
Kernel Source: https://github.com/omnirom/android_kernel_samsung_jf
XDA:DevDB Information
Omni for Galaxy S4, ROM for the Samsung Galaxy S 4
Contributors
jakew02, xplodwild
Source Code: http://www.github.com/omnirom/
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2014-05-28
Last Updated 2015-04-20

Important Information
This is NOT the place to ask questions like:
When will <feature> be included?
Is <feature> included yet?
Can you bring <feature> to Omni?
ETAs of any nature
Follow the rules. This is a new thread and it WILL remain clean and ON TOPIC. I will immediately report any off-topic posts, trolling, flaming, etc. of any sort. This is a DEVELOPMENT thread, and as such, has been posted in the DEVELOPMENT section.
INCLUDE LOGS when reported a bug. Even if you think that you might be the only one with the bug, POST LOGS, that will help narrow down the issue about 100 million times!
Explore the ROM a bit before posting here things like " WHERE IS <feature> CAN YOU ADD FEATURE etc. etc.
You have to understand, that gets extremely annoying after 50 posts like that. Most features can be seen on the blog or in the MERGED section of gerrit.
Root IS NOT included with Omni by default, so you will need to flash SuperSU in recovery SuperSU
How to build Omni from sources:
OmniROM - Setting Up A Compile Environment
Bug Reports and Feature Requests
jira.omnirom.org​

Important Information Part 2
Omni XDA Discussion ( NOT DEVICE RELATED DISCUSSION ONLY)
http://forum.xda-developers.com/omni
IRC
Web Client
irc.freenode.net
#omni

First

Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk

Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?

rabiny said:
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
Click to expand...
Click to collapse
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
buzzwyzr said:
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I just flashed the 05/28 nightly (on my jfltespr) with the 4-16 Minimal PA Gapps with absolutely no errors. This most definitely sounds like a Gapps problem to me, since the SetupWizard is not packaged or built with the ROM, but instead flashed with Gapps. This is why if you were to NOT flash a Gapps package, you don't have to run through it.

jakew02 said:
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
Click to expand...
Click to collapse
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)

rabiny said:
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
Click to expand...
Click to collapse
If you are already running Omni then you're fine. Just follow the instructions from the OP.
These instructions are written under the assumption that you know how to root and install a custom recovery.
Sent from my X9006 using Tapatalk

Is custom hot word launcher built in yet?

ahoslc said:
Is custom hot word launcher built in yet?
Click to expand...
Click to collapse
Yes. I've been using it and it works perfectly fine.
You can see that from gerrit as well as the XDA News Portal...
I'm squashing questions like this now. Please re-read Post 2 as I have updated it.

flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?

bala_gamer said:
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
Click to expand...
Click to collapse
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks

djbootleg said:
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
Click to expand...
Click to collapse
These aren't issues or bugs at all; you just haven't looked around the settings.
all of your questions can be answered by just looking through the settings.
OP updated, please re-read it.

Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/

Shaftamle said:
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Click to expand...
Click to collapse
It's 183mb, I've just flashed. Working fine.

ZordanKV said:
It's 183mb, I've just flashed. Working fine.
Click to expand...
Click to collapse
Have you tried flashing a custom kernel with the latest nightlys?

bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
Nope, already switched to the other ROM. Omni is good, but doesn't suit my needs

bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
gpu drivers fixed

jakew02 said:
i have stated multiple times that kernel developers will need to begin released "omni-based" kernels.
I WILL NOT alter this ROM to accommodate custom kernels. the kernels need to change to be compatible with the ROM.
Custom kernels will not just magically start working. Kernel developers need to remove the flo adreno drivers and related commits from their kernels. If they don't know which commits those are, they can simply cherry-pick this commit: https://github.com/omnirom/android_kernel_samsung_jf/commit/068449af3996f1072c80dcc4a09a88af43abd7f7
contained in that commit is all of the reverts needed to make a cyanogenmod-based kernel work with Omni.
I have spoken with @Entropy512 about this a few times and we both agreed that we will NOT be altering the ROM in order to this one device to be able to use flo adreno stuff. That's just stupid and causes more work and problems for everyone else.
So the bottom line on this is, if you want a custom kernel, ask your kernel devs to cherry-pick the above commit and release Omni kernels separately from CM-based one.
If anyone has a problem with this, well, gerrit is free to use and open to all.
As before I will use this comparison to better justify my decision:
You wouldn't buy a Playstation controller(an accessory) to use with your Xbox(a primary), once you get home and realize it doesn't work because it's designed for something other than what you have, you call Microsoft and demand that they make the Xbox(primary) work with Playstation controllers(accessory)?
Absolutely Not. If ANYTHING, you would call Sony and demand that they make their controllers(accessory) work with the xbox system.
Hope this clarifies that issue a little better for everyone.
Also on another note:
I have narrowed down the camera preview freeze down to one repository
Click to expand...
Click to collapse
Jake the only reason I asked was because I did a bit of testing for you where the testbuild had support for custom kernels and you said that it should be fixed and you would push the change when you could. I even followed up with you at a later time and you said you hadn't had time/inclination to do it yet. I'm not demanding anything of you and I didn't want to bug you with the issue so I asked someone else who was in similar territory. Had I known about your changed stance on the issue, I wouldn't have brought it up.

crDroid [ROM] [GT-I9300] [MM Build] [6.0.1] [Weekly] [Unofficial] [20160215]

Official Thread will be soon up! Head over there guys.
This thread is dead!
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @forkbomb444. crDroid is available thanks to him. I'm using his devices, kernel, proprietary vendor and many other repos to build
All the source code for crDroid is available in the Github
repo. And if you would like to contribute feel free to pull a request.
Kernel features beyond CyanogenMod ones (Work in Progress) [Future Release]
• Boeffla Charging Control
• Boeffla Sound.
All this can be initiated through some script knowledge.
INSTALLATION METHOD
First time installing crDroid to your I9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
-Note: Flash ROM and GApps together or else you'll have a hard time.
- Flash SuperSU (not mandatory. We have
CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
Download Link:
https://www.androidfilehost.com/?fid=24415232478677728
GApps: opengapps.org
Full support
https://plus.google.com/communities...4243234a-de8a-4262-bd30-68582ebeb472?hl=pt_br
Don't expect any support if you
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Special thanks:
- Google
- CyanogenMod
- @forkbomb444
- @temasek
- @Darkened_Sky
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Source: http://www.github.com/cyanogenmod
https://github.com/crdroidandroid

Reserved 1 (Screenshots)
Someone please share some screenshots!

FAQ
Do read this before asking questions!
1. Q: How do I get root?
A: Enable it in developer options.
2. Q: But can I use SuperSU instead of the built-in SU?
A: Sure. Make sure that the built-in SU is disabled in developer settings. Afterwards flash SuperSU. By default after a clean flash built-in SU is disabled, so you can also directly flash SuperSU after a clean flash
3. Q: Which gapps do I need?
A: This ROM is based on CM13/Android 6.0x/Marshmallow. Therefore choose your gapps accordingly. If you want to use the recommended opengapps, choose the ARM 6.0 version. I highly suggest to use either the pico or the nano package. All other gapps can later still be installed via playstore!
4. Q: Help! I have a problem/issue/bootloop/....?
A: Please follow these steps:
1. Make sure that the problem is not already mentioned in either this thread or in the CM13 thread.
2. Make sure that you can reproduce the problem on your device with absolutely no additional modification and after a clean flash. This includes being on stock kernel, no xposed, no SuperSU, no theme!
3. Try to replicate the problem on official CM13. If it appears there, please ask there.
4. If your problem couldn't be solved with above steps, post here, with an exact description of how to reproduce and if possible with logs.
5. Q: Is xposed working?
A: Yes but make sure to use the latest and the correct version for Marshmallow. Inform yourself in the xposed thread. Everything is clearly explained there which version you need. The version that works for you on official CM13 will also work here.
6. Q: Can I use custom kernels?
A: Yes. Users which use SuperSU frequently report problems with bootloops after flashing a custom kernel. Therefore I'd suggest to use built-in SU.
7. Q: I have added files to my system, but after each ROM update they disappear?
A: Yes during a flash the /system partition is wiped.

yess i'v ben waiting for this rom to get MM

ayoubadri said:
yess i'v ben waiting for this rom to get MM
Click to expand...
Click to collapse
What you waiting for? Give it a try

nice new rom for s3 thinks Dev

spide3 said:
nice new rom for s3 thinks Dev
Click to expand...
Click to collapse
Download and Flash! Enjoy

P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information

sunny1234590 said:
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
Click to expand...
Click to collapse
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300

jujuna said:
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
Click to expand...
Click to collapse
No bug on my device. Using stock kernel?

Are you maintaining this ROM now?

sameer23 said:
Are you maintaining this ROM now?
Click to expand...
Click to collapse
I have opened this thread on the behalf of the original developer but yes, I'll keep it updated with new builds. So, kind of Yes!

sunny1234590 said:
No bug on my device. Using stock kernel?
Click to expand...
Click to collapse
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?

jujuna said:
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
Click to expand...
Click to collapse
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?

sunny1234590 said:
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
Click to expand...
Click to collapse
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.

jujuna said:
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
Click to expand...
Click to collapse
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!

sunny1234590 said:
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
Click to expand...
Click to collapse
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0

jujuna said:
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
Click to expand...
Click to collapse
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.

Hi guys,
I can't give root permission to apps.
I've enabled Developer Options, and enabled Root Access to Apps, but when I try to run an app that needs root, it doesn't ask permissions.
Could you give me a hint?
Thanks

sunny1234590 said:
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Click to expand...
Click to collapse
i flashed but no result

[OnePlus5] [ROM]crdroidandroid-4.0-beta-tudourom

Welcome to the goodness of Oreo. This topic will be dedicated to our bring up of Oreo for OnePlus 5. Sincere thanks to LineageOS team for device tree, kernel and vendor bring up.
While the feature list will be constantly updated, remember the ROM is in beta stage and would expect logs if you want to report issue.
Special thanks to: crdroidandroid sudamod sdhz and so on。
The project is localized in China, pure and no promotion of app
Add call home, T9 intelligent search, SMS home and one key copy verification code,
Add contact initials, black domain block APP run。
OnePlus 5 Specific Feature Highlights:
Sigma Kernel - Upstreamed stable kernel
OOS Camera and OOS Gallery (No portrait / beauty mode)
OTA support
Arm-v8a optimizations
Pre-installation Notes:
Requires latest Open Beta 5 firmware and modem, one time flash - Download Here[url]https://jamal2367.com/downloads/OnePlus%205/Firmware%20%2B%20Modems/Android%208.0.0/Open%20Beta/OnePlus5_OpenBeta5-FIRMWARE%2BMODEM-flashable.zip[/URL]
TWRP by codeworkx works fine - Download Here[url]https://forum.xda-developers.com/oneplus-5/development/recovery-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723[/URL]
Always backup before you install. Ensure you have data connection (mobile or wifi) for setting up account after clean install - you might not able to skip account setup.
Installation steps:
Clean wipe system partition, cache partition.
For clean install: wipe userdata partition. Clean install required if you're coming from other ROM or facing issues after dirty install.
Flash ROM + Flash Arm64 Gapps
For decrypted devices: Flash no_verity zip downloaded from OP
Reboot and profit
Installation Notes:
LOS superuser is pre-installed can be enabled under developer options.
Optional: If you want to use Magisk Root solution-[url]https://forum.xda-developers.com/apps/magisk[/URL] you need to flash ROM, reboot once, complete setup and then flash Magisk in recovery.
Optional: For decryption, you must clean wipe everything once and to keep device decrypted, flash NO VERITY FOR OOS 5.0 everytime after flashing ROM - Download Here[url]https://www.androidfilehost.com/?fid=673956719939825560[/URL]
[SIZE="<font style="vertical-align: inherit;"><font style="vertical-align: inherit;">6</font></font>"]Download Links:[/SIZE]
ROM - Click Here[url]https://www.androidfilehost.com/?fid=890129502657588800[/URL]
Open Gapps for 8.1 - Click Here[url]http://opengapps.org[/URL]
Loving this? Support us by donating.
Join us on Google+ for more updates.
Cheers!
XDAevDB Information
crDroid Android, ROM for the OnePlus 5
Contributors
tudourom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Nightly
Created 2018-01-07
Last Updated 2018-03-07

:laugh:

Just checking if this topic should be included under OnePlus 5 ROMs, Kernels, Recoveries, & Other Development.
If I decide to do a clean install should I still need to do this step,
=> Requires latest Open Beta 5 firmware and modem, one time flash - Download Here https://jamal2367.com/downloads/OneP...-flashable.zip
Thanks.

smohanv said:
Just checking if this topic should be included under OnePlus 5 ROMs, Kernels, Recoveries, & Other Development.
If I decide to do a clean install should I still need to do this step,
=> Requires latest Open Beta 5 firmware and modem, one time flash - Download Here https://jamal2367.com/downloads/OneP...-flashable.zip
Thanks.
Click to expand...
Click to collapse
The newly applied XDA account has no authority to publish in the ROM section

tudouos said:
The newly applied XDA account has no authority to publish in the ROM section
Click to expand...
Click to collapse
Thanks. I understand now.
Also, could you please respond to this question.
If I decide to do a clean install should I still need to do this step,
=> Requires latest Open Beta 5 firmware and modem, one time flash - Download Here https://jamal2367.com/downloads/OneP...-flashable.zip

smohanv said:
Thanks. I understand now.
Also, could you please respond to this question.
If I decide to do a clean install should I still need to do this step,
=> Requires latest Open Beta 5 firmware and modem, one time flash - Download Here https://jamal2367.com/downloads/OneP...-flashable.zip
Click to expand...
Click to collapse
yes

tudouos said:
The newly applied XDA account has no authority to publish in the ROM section
Click to expand...
Click to collapse
This is correct, but neither should a ROM be posted in the Themes, Apps and Mods section, so I'm going to move it to How-To for now.
If you would like your ROM moved to the Development section, it must meet the requirements stated in the sticky titled "Device Forum Rules (Please Read before posting)". In particular, the OP must contain a link to all relevant sources as described in post #2. Once your OP is properly updated, send me a PM and it can be moved.
Thank you.

the Doctor said:
This is correct, but neither should a ROM be posted in the Themes, Apps and Mods section, so I'm going to move it to How-To for now.
If you would like your ROM moved to the Development section, it must meet the requirements stated in the sticky titled "Device Forum Rules (Please Read before posting)". In particular, the OP must contain a link to all relevant sources as described in post #2. Once your OP is properly updated, send me a PM and it can be moved.
Thank you.
Click to expand...
Click to collapse
thank you.Could you help me move the

tudouos said:
yes
Click to expand...
Click to collapse
If the answer is YES, you have to insert this step in your installtion step manual and insist that the OB5 framework and MODEM needs to be flashed even though clean install is opted.

smohanv said:
If the answer is YES, you have to insert this step in your installtion step manual and insist that the OB5 framework and MODEM needs to be flashed even though clean install is opted.
Click to expand...
Click to collapse
If you use now is the official 8.0 don't need this step

tudouos said:
thank you.Could you help me move the
Click to expand...
Click to collapse
As I said in my post above, you need to read the sticky linked in my post and make the appropriate changes first. After that I would be glad to help. If you have any questions about that, please shoot me a PM.

tudouos said:
If you use now is the official 8.0 don't need this step
Click to expand...
Click to collapse
Users may be coming from other ROM.
Example: I am on crDroid. If I come to your Beta version, I assume that I have to do clean install. I have to follow the steps as below,
1. Clean wipe everything (via TWRP => data format, wipe dalvik/chache, system and data)
2. Flash the OB5 firmware/MODEM (your 59mb file)
3. Flash ROM
4. Flash GAPPS
5. Flash NoVerity (opyional) only if want to have device decrypted
Your instruction can be slightly tweaked in two parts.
(1) for users coming from official Oreo 8.0, and
(2) for users coming from other custom ROMs (like I expained above)
Am i correct in my assumptions.

the Doctor said:
As I said in my post above, you need to read the sticky linked in my post and make the appropriate changes first. After that I would be glad to help. If you have any questions about that, please shoot me a PM.
Click to expand...
Click to collapse
Hello, your trouble, I am a Chinese fans, for English is not very understand, can you help me to modify it, post all I need to use the link provided, thank you

tudouos said:
Hello, your trouble, I am a Chinese fans, for English is not very understand, can you help me to modify it, post all I need to use the link provided, thank you
Click to expand...
Click to collapse
yes.you are right

smohanv said:
Users may be coming from other ROM.
Example: I am on crDroid. If I come to your Beta version, I assume that I have to do clean install. I have to follow the steps as below,
1. Clean wipe everything (via TWRP => data format, wipe dalvik/chache, system and data)
2. Flash the OB5 firmware/MODEM (your 59mb file)
3. Flash ROM
4. Flash GAPPS
5. Flash NoVerity (opyional) only if want to have device decrypted
Your instruction can be slightly tweaked in two parts.
(1) for users coming from official Oreo 8.0, and
(2) for using coming from other custom ROMs (like I expained above)
Am i correct in my assumptions.
Click to expand...
Click to collapse
yes.you are right

tudouos said:
Hello, your trouble, I am a Chinese fans, for English is not very understand, can you help me to modify it, post all I need to use the link provided, thank you
Click to expand...
Click to collapse
Please refer to the PM that I just sent you.

tudouos said:
yes.you are right
Click to expand...
Click to collapse
Feeling with it

I am reluctant to try this ROM until moderator brings this topic to ONEPLUS 5 ROMS, KERNELS, RECOVERIES, & OTHER DEVELOPMENT.
It will give some comfort that the ROM has the sources verified. Thanks.

tudouos said:
Loving this? Support us by donating.
Join us on Google+ for more updates.
Cheers!
XDAevDB Information
crDroid Android, ROM for the OnePlus 5
Contributors
tudourom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Nightly
Created 2018-01-07
Last Updated 2018-03-07
Click to expand...
Click to collapse
What is the Google+ link?

Pho3nX said:
What is the Google+ link?
Click to expand...
Click to collapse
Androidfilehost.com

[ROM][11.0][Discontinued] Yet another AOSP project [Mi A1 Tissot][ALPHA]

Who are we?​YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:​
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Downloads​Mi A1​Flashing Procedure​Install Latest Custom Recovery (This is recommended)
Coming from a different rom / OS you'll need to clean flash:
1. Wipe data (Factory reset)
(1.1.) If coming from stock OS you may need to format internal storage
2. Flash rom
(2.1.) After Flashing rom Flash Twrp (dont reboot without installing it)
(2.2)After Flashing Twrp go back to main menu and go to Reboot menu and select Reboot to Recovery Again
(2.2)Flash Gapps (This Recommended) For Root We Suggest Use Magisk Canay Builds (check below for download link)
3. Rejoice
For dirty flash just skip step 1, 1.1
and possibly 2.1 if your mods support addon.d (ex: Magisk)
It does not matter when you flash the firmware zip, and you only need to flash it once per firmware version
XDA:DevDB Information
Yet another AOSP project, ROM for the Mi A1
Contributors
murtaza1326
Source Code: [url]https://github.com/yaap[/URL]
Device Tree: [url]https://github.com/yaap/device_xiaomi_tissot[/URL]
Common Device Tree: [url]https://github.com/yaap/device_xiaomi_msm8953-common[/URL]
Vendor Tree: [url]https://github.com/yaap/vendor_xiaomi[/URL]
Kernel Source Code: [url]https://github.com/yaap/kernel_xiaomi_tissot[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: v10.0.24.0 (Pie) (August)
Based On: AOSP
Version Information
Status: Alpha
Created 2020-09-20
Last Updated 2020-10-06

Working:
Camera/Video/Mic
Fingerprint
GPS
IMS (VoLTE)
RIL
Video playback
Wi-Fi
NightLight
CTS
Broken:
WFD
Bubbles
Switching back to wifi after using hotspot
(need to reboot to use wifi again)
Note: The ROM Does Not Include Gapps Feel Free to flash any gapps of your likings Nik Gapps are Recommended
For Root Magisk Canary Build(Compatible with R Only) is Working Fine This Works Perfectly (Do Not Update it)
Here
Credits Section
I am not alone to bring it up to you guys alone there are many many and many people who helped me to achive this
and i would like to mention them
First I would like to thanks
@abhinavagrd_1129 even tho me and him started bringing up trees differently he was always there to guide me
& i would like to tell you that his Aosp Beta 3 Rom Inspired me to try to bringup trees
@poad42 (Our Lead Dev of Project Yaap is the one who helped me alot to fix many bugs including the lags we were facing he pointed out fix to me
@SagarMakhar he is the one who fixed my noobish mistake i made everytime (also helped me to fix ril in the previous version)
@gotenksIN a guy who also stucked with his own bringup as well i was, we disscussed about bugs and different things together
@shivatejapeddi thanks to him VNDK29 issues were solved
@Lostark13 pointing and hinting me out for diffrent smaller things
Vince Device Devs (i picked there fixes thanks alot guys )
my mates in tissot maintainer TG group
also my testers ( i uslly do my own testing but at some point they helped me to too thanks alot guys)
if i miss anyone from the list do let me know :laugh:

New Changelogs :-
Code:
Device Side:-
Enforcing Now
CTS Passes Without Root(Tissot FP No More Pixel Props)
Fixed USB Teathering
Source Side:-
Merged Latest ASB (October)patch r5
Added Q/S Customisations
Added Clocks In Styles & wallpaper app
Added DT2W & DT2Sleep Gestures
Added Brightness Slider Customization
Added Custom Footer Text Support
Old Changelogs :-
Code:
Fixed Night Light
Fixed 3rd Party Apps Not Detecting Fingerprint
Fixed Wifi & Wifi Hotspot Toogle
Fixed CTS (With Root (No More Pixel Props Needed))
Xiaomi Parts Removed Vibration Controls Completly
Xiaomi Parts (New Adaptive Icons will match other android R icons)
Source side features will be added soon

Piru?
Congratulations ??

Harvey_Spectar said:
Piru
Congratulations ??
Click to expand...
Click to collapse
tnq sar

Good to See on 11 too..

Weww.. A11 going lit ??

Pro!!!! Nice work bruh!

Gawd
Sent from my Mi A1 using Tapatalk

What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions

sergiobh said:
What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions
Click to expand...
Click to collapse
sorry for inconvenience updated info
edit: i have added links for required firmware there shouldnt be a issue to find it somewhere else

Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.

?

KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
it could be different sensor like fpc ? i will see and i will fix it thanks for informing about magisk

KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor

murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.

murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Hello prosur!
KaaMyA said:
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.
Click to expand...
Click to collapse
You can still check which fingerprint sensor your device have

Takeshiro04 said:
You can still check which fingerprint sensor your device have
Click to expand...
Click to collapse
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.

KaaMyA said:
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.
Click to expand...
Click to collapse
Install Device info apk and check the fingerprint sensor

murtaza1326 said:
i need more details on your sensor type if you can provide me
Click to expand...
Click to collapse
Mr Magneto said:
Install Device info apk and check the fingerprint sensor
Click to expand...
Click to collapse
I have installed "Device Info HW" app and it tells that my sensor variant is "goodix".

[ROM][UNOFFICIAL][pioneer][H3113][11] AOSP android 11

Hi, this is an AOSP 11 build using official Sony guide
It is a straightforward build, no customizations, no specific code, just standard AOSP with Sony kernel.
Contents
Android 11 AOSP, branch android-11.0.0, kernel 4.14, release build (not userdebug)
Stock AOSP apps: phone, contacts, calendar, camera, gallery, files, clock
There are no google services on AOSP, you're on your own if you want to install them. I personnaly use Aurora and F-droid to install more apps
Download
Build: android-11.0.0_r17
New build: android-11.0.0-r27
SHA256: 35a03ad0858313d03cdce18b2ba681c4cab085d4c67b0a61aac26489316e03ce android-11.0.0_r17.zip
SHA256: ddc4f8a28d6054387db9a2d6a27c514cf38f3f08001c8be3c9abfdd928e8a950 android-11.0.0_r27.zip
Please always check SHA256 after download
Installation
This will erase your data.
Follow official Sony guide from step 6.
Here is a summary:
Enter fastboot (switch off your phone, plug usb while pressing volume up, keep volume up until led comes blue)
Download Sony vendor image
Unzip it
Code:
unzip SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.zip
Flash it
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.img
Download the build from link above
Unzip it
Flash images:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img (may be skipped for updating, backup your data anyway)
Disclaimer & support
This will erase your data.
You may brick your device.
This is an AOSP ROM, I am not a developper and do not provide support.
Feel free to discuss bugs here, and/or report them to either Google (AOSP bugs) or Sony (specific hardware bugs)
Status / what works
The build is quite stable and useable for everyday.
Works:
* calls
* SMS/MMS
* wifi
* bluetooth
* lte
* gps
* front/rear camera
* flash/torch
* rotation
* fingerprint
Bugs
* Editing pictures with the stock app does not work
* The phone won't boot if USB charger plugged in
XDA:DevDB Information
AOSP, ROM for the Sony Xperia XA2
Contributors
sam2oufguedin
Source Code: https://developer.sony.com/develop/...nstructions/build-aosp-android-android-11-0-0
ROM OS Version: 11
ROM Kernel: Linux 4.14
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-11-05
Created 2020-11-18
Last Updated 2021-01-12

sam2oufguedin said:
Hi, this is an AOSP 11 build using official Sony guide
It is a straightforward build, no customizations, no specific code, just standard AOSP with Sony kernel.
Contents
Android 11 AOSP, branch android-11.0.0_r17, kernel 4.14, release build (not userdebug)
Stock AOSP apps: phone, contacts, calendar, camera, gallery, files, clock
There are no google services on AOSP, you're on your own if you want to install them. I personnaly use Aurora and F-droid to install more apps
Download
Build: Use this link
SHA256: 35a03ad0858313d03cdce18b2ba681c4cab085d4c67b0a61aac26489316e03ce android-11.0.0_r17.zip
Please always check SHA256 after download
Installation
This will erase your data.
Follow official Sony guide from step 6.
Here is a summary:
Enter fastboot (switch off your phone, plug usb while pressing volume up, keep volume up until led comes blue)
Download Sony vendor image
Unzip it
Code:
unzip SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.zip
Flash it
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.img
Download the build from link above
Unzip it
Flash images:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img
Disclaimer & support
This will erase your data.
You may brick your device.
This is an AOSP ROM, I am not a developper and do not provide support.
Feel free to discuss bugs here, and/or report them to either Google (AOSP bugs) or Sony (specific hardware bugs)
Status / what works
The build is quite stable and useable for everyday.
Works:
* calls
* SMS/MMS
* wifi
* bluetooth
* lte
* gps
* front/rear camera
* flash/torch
* rotation
* fingerprint
Bugs
* Editing pictures with the stock app does not work
XDA:DevDB Information
AOSP, ROM for the Sony Xperia XA2
Contributors
sam2oufguedin
Source Code: https://developer.sony.com/develop/open-devices/guides/aosp-build-instructions/build-aosp-android-android-11-0-0
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-11-05
Created 2020-11-18
Last Updated 2020-11-18
Click to expand...
Click to collapse
Bro sodp has camera problem on nile platform
Is camera fixed in this?
Asking because it's mentioned in working column

Arbaazhussain said:
Bro sodp has camera problem on nile platform
Is camera fixed in this?
Asking because it's mentioned in working column
Click to expand...
Click to collapse
Yes, camera works.
This build includes this workaround described by sony to make camera works.
There are some random issues, but it is quite rare, and you just have to restart camera app to get rid of them.

sam2oufguedin said:
Yes, camera works.
This build includes this workaround described by sony to make camera works.
There are some random issues, but it is quite rare, and you just have to restart camera app to get rid of them.
Click to expand...
Click to collapse
Ok then I am gonna try and say the results here

Arbaazhussain said:
Ok then I am gonna try and say the results here
Click to expand...
Click to collapse
Did you succeed with the rom?

sam2oufguedin said:
Did you succeed with the rom?
Click to expand...
Click to collapse
Yes and sorry the post was unavailable due to some error in xda bacause they are migrating
Sir did u try gcam on it
I tried gcam but without gapps but didn't succeed in opening
So I want to know as I am not on it.
Nice work camera works very perfectly
Had problems in mtp don't know binary or build tried on v3
I even wanted to know whether gsis work in top of it
Very nice work

Please change from gingerbread to android 11 or android R

Arbaazhussain said:
Yes and sorry the post was unavailable due to some error in xda bacause they are migrating
Sir did u try gcam on it
I tried gcam but without gapps but didn't succeed in opening
So I want to know as I am not on it.
Nice work camera works very perfectly
Had problems in mtp don't know binary or build tried on v3
I even wanted to know whether gsis work in top of it
Very nice work
Click to expand...
Click to collapse
I'm using "open camera".
Indeed gcam requires play services. You may have luck with this but i didn't personally tried it

sam2oufguedin said:
I'm using "open camera".
Indeed gcam requires play services. You may have luck with this but i didn't personally tried it
Click to expand...
Click to collapse
Hmm
I have seen the post earlier it's just a gcam provider which requires microg right?

Arbaazhussain said:
Hmm
I have seen the post earlier it's just a gcam provider which requires microg right?
Click to expand...
Click to collapse
Just read doc from the link: "This app "simulates" the Google Play Services that the Google Camera app (Gcam) requires, allowing the camera app to be used on devices without Google Play Services."

sam2oufguedin said:
Just read doc from the link: "This app "simulates" the Google Play Services that the Google Camera app (Gcam) requires, allowing the camera app to be used on devices without Google Play Services."
Click to expand...
Click to collapse
Cannot flash gapps
I tried nikgapps android 11 macro
The system gets corrupted and doesn't boot goes in bootloop
Gcam is working fine

Cannot load any gsis on top of it please help me because i want to use gsi upon this

Only one build release?
Or more?

Arbaazhussain said:
Only one build release?
Or more?
Click to expand...
Click to collapse
I tried a build with latest december patches, but wifi was not working anymore

sam2oufguedin said:
I tried a build with latest december patches, but wifi was not working anymore
Click to expand...
Click to collapse
Oh even pe maintainer who maintains all devices facing issue in wifi maybe sodp problem
Bro can u decrease brightness values it too high at 0
Please do if u can please
And bro can u say me why gsis doesn't work please
I want gsis as I want customisation and also doesn't offer only aosp works even phh aosp works
It's like it's tagged to work only aosp

Arbaazhussain said:
Bro can u decrease brightness values it too high at 0
Click to expand...
Click to collapse
I agree about brightness.
Please file a bug report on Sony's bug tracker

sam2oufguedin said:
I agree about brightness.
Please file a bug report on Sony's bug tracker
Click to expand...
Click to collapse
Done bro

How to use gcc instead of clang?
U used gcc right?

Arbaazhussain said:
How to use gcc instead of clang?
U used gcc right?
Click to expand...
Click to collapse
Yes, only for rebuilding the kernel.
It is really painful to setup, I used this guide and some advises from this, but it is far from straightaway guide.
You'll have to checkout old versions of android prebuilt gcc to get gcc because it was removed on master...

sam2oufguedin said:
Yes, only for rebuilding the kernel.
It is really painful to setup, I used this guide and some advises from this, but it is far from straightaway guide.
You'll have to checkout old versions of android prebuilt gcc to get gcc because it was removed on master...
Click to expand...
Click to collapse
Thank you sir
Did u come across MTP problem in this build?
I got so I am asking

Hi, I published a new build with latest android security patch (2021-01-05).