Here is a problem.
All guides where mentioned qhsusb_bulk are saying that you need just install Qualcomm drivers.It does not work in my case.. I, ve tried Qualcomm HS-USB QDLoader 9008 and other.
Device manager steel recgnise my phone as qhsusb_bulk
After installation of LGMobileDriver_WHQL_Ver_4.0.4.exe it will recognise my phone as
LGE AndroidNet USB
I had pink screen problem and phone could be recognised by LG SUITE.
After trying to unbrick it by Formatting inner memry emmc to fat32(without microSD i did not insert it at all) it became 4GB disk, i installed on it Loader.img by program DiskImageRev2.zip and (without errors)
Later i tried to to use Flash tool 2014 (it showed error on 50% of loading firmware tdz and .tot for my phone. I tried BoardDiag 3.99. and KDZ updater without success.
ANY IDEAS? I heard about SRK tool 2.1 .QPST and ADP?
Are there guys who knows how to use such things?
Also i heard about Test point and Wired to connect pins in your phone etc.
I can install linus . I used Win7 Ultima x64
I have the same problem
Related
I have a problem with my Huawei Ascend W1-U00
After failing to flash the device with the eMMC software download, my phone is now stuck in download mode
qualcomm HS-USB QDloader 9006/ qualcomm HS-USB QDloader 9008 I can switch between these 2 modes.
Is there any possibility to do a hard reset?
Please help me out!
Start with QPST and test point , will let you flash again
jwiena said:
I have a problem with my Huawei Ascend W1-U00
After failing to flash the device with the eMMC software download, my phone is now stuck in download mode
qualcomm HS-USB QDloader 9006/ qualcomm HS-USB QDloader 9008 I can switch between these 2 modes.
Is there any possibility to do a hard reset?
Please help me out!
Click to expand...
Click to collapse
I am in the same boat as you. So far I have no progress, I'll update back if I get past this.
maamdroid said:
I am in the same boat as you. So far I have no progress, I'll update back if I get past this.
Click to expand...
Click to collapse
I've had a similar experience. What I did was redo the part (sorry, XDA won't let me post URL's to the tutorial until I make more than 10 posts) where it says to connect the test points on the phone and connect it to your computer via USB. After that, I was able to re-flash everything via the QPST applications and it worked perfectly. Remember to run all of the QPST applications in administrator mode by right clicking the shortcut, clicking on "properties," going to the "Compatibility" tab, and checking the "Run this program as an Administrator" box. Hope this helps
gdiddy320 said:
I've had a similar experience. What I did was redo the part (sorry, XDA won't let me post URL's to the tutorial until I make more than 10 posts) where it says to connect the test points on the phone and connect it to your computer via USB. After that, I was able to re-flash everything via the QPST applications and it worked perfectly. Remember to run all of the QPST applications in administrator mode by right clicking the shortcut, clicking on "properties," going to the "Compatibility" tab, and checking the "Run this program as an Administrator" box. Hope this helps
Click to expand...
Click to collapse
Got it working. Simple solution, I used a physical Windows 7 32bit machine.
Previously I was using:
Windows 8 64bit
Windows 7 64bit
Windows 7 32bit - Virtual
Kept running into issues on all except for physical W7 32bit.
maamdroid said:
Got it working. Simple solution, I used a physical Windows 7 32bit machine.
Previously I was using:
Windows 8 64bit
Windows 7 64bit
Windows 7 32bit - Virtual
Kept running into issues on all except for physical W7 32bit.
Click to expand...
Click to collapse
Ah, I had never even considered that a virtual machine could be used. Glad to know you got it all sorted out though.
Hello guys.
So many sorry about my English.
I tried everything.
And you my last chance.
On my hands LG L90 D415, stuck on Qualcomm HS-USB QDLoader 9008.
It was rooted with CWM.
Mistakenly was installed wrong firmware (probably from D410)
Now phone with black screen and only responds in device manager like Qualcomm HS-USB QDLoader 9008(no recovery, no download mode).
LG Flash tools do not responds.
All drivers ok.
B2bSupport do not helps.
Options on B2bSupport: - Shipset W7 G2MDS, -port like in device manager, -target DIR C:\, -test AP and EMMC
AP check finished with "no response from the device. Check PMIC first and if still boot problem, replace AP" and "Failed to conect to the flash programer".
And i dont know what to do next. If someone has file "loader D415.img" and *.tot files, i will be very grateful.
Please help me!
lg l90 gard bricked
so have you fixed it i have the same problem here and i have those files so just pm me if you see this reply and tell me waht happend and we might fix it together i gesss...
Hi guys,
I have the same problem, the phone's chowing Qualcomm HS-USB QDLoader 9008 in device manager. Please help on how to repair boot
Maybe this helps
Well, I see nothing as of yet. I have been through almost all situations with this phone. I have had this happen to my phone before. Only problem, I don't remember exact fix. I will recommend this forum. http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830 It is for the G2, but I've used several of their threads for my phone. Read post first, but its the best solution I can offer. The only other thing you could try is searching and learning about Qualcomm's QPST program. Hope this helps.... Good luck
So i wanted to unbrick my Galaxy S1 I9000,and when i connect him to odin,it recognize him with yellow and when i start the process it says Failed.I teied different versions of odin,pit file,different firmware,different usb ports,different drivers and nothing works...it recognize him,but it doesnt install it...
https://forum.xda-developers.com/xperia-sp/help/bricked-flashing-wrong-rom-t3576684
In short, I got my xperia sp bricked after flashing a c5302 rom on a c5303 device
http://sony.yt/topic/7322-english-tu...eria-sp-c5303/
The method in this link states that phone may be detected as "qhusb_dload device", but what I detect is "Qualcomm HS-USB QDLoader 9008" in device manager
Then I followed the same steps to use S1tool, seems the tool fails to detect my device and I stopped here
but in "device and printers" in control panel, there is a grey qhusb_dload device icon!! so it means there is a short instant my device is detected as "qhusb_dload device"?
I have tried attaching the cable again and again, my phone has never been detected as qhusb_dload device again
Any idea for my situation? Thanks for any possible explanations to my case
Brah just flash firmware using flash tool thats it. Thanks appreciated
I got the same problem with an xperia sp.
I used the method from the tutorial and it worked. Have you installed the usb drivers from the archive ?
If you're using linux, you can try this tool that needs no drivers: https://github.com/eti1/spflasher
Flash doomlord's kernel using flash tool and boot into cwm and wipe system,cache,dalvik,data(optional) and flash ROM gapps and magisk.
LG G2 Lite D295F
CHIPSET: MSM8812
I tried using BoardDiag and the phone passed all 3 tests. Then someone told me it didnt work for my chipset.
I tried to use a Loader.img to go to download mode. However it didnt work for me. My phone show 0% battery and do not start from SD at all. I'm afraid i used the wrong .img but i can't find the right one. The one I tried was from 4Pda LG L Fino page.
The brick was caused by a bad ROM installation. It shows as QLoader 9008, no partitions detected (still it passes the eMMC test from BoardDiag. ) When the bootable SD card is inside it. it shows as LGE Androidnet.
I would really appreciate any help with this problem. I don't think the phone has any hardware problem, because a friend of mine installed the same ROM and is with the same problem..
Help me!
Thiagopm26 said:
LG G2 Lite D295F
CHIPSET: MSM8812
I tried using BoardDiag and the phone passed all 3 tests. Then someone told me it didnt work for my chipset.
I tried to use a Loader.img to go to download mode. However it didnt work for me. My phone show 0% battery and do not start from SD at all. I'm afraid i used the wrong .img but i can't find the right one. The one I tried was from 4Pda LG L Fino page.
The brick was caused by a bad ROM installation. It shows as QLoader 9008, no partitions detected (still it passes the eMMC test from BoardDiag. ) When the bootable SD card is inside it. it shows as LGE Androidnet.
I would really appreciate any help with this problem. I don't think the phone has any hardware problem, because a friend of mine installed the same ROM and is with the same problem..
Click to expand...
Click to collapse
I have a LG G2 Lite D295F and it only stays in Qualcomm HS-USB QDLOADER 9008 (COM4).
I was able to flash him through QFIL successfully, but he does not care the same way.
In BoardDiag the same thing, he can flash in the rom, passes all tests (AP, EMMC, SDRAM) but does not turn on. Sometimes it comes back as QS-USB BULK, but it does not get even 20 seconds and it goes back to HS-USB QDLOADER 9008.
If I write the loader of it in img on an SD card, it appears that it is loading but not for a second it already disconnects and stays in it the whole time. Sometimes it mounts as removable (Qualcomm MMC Storage).
The battery is charged, but not the life signal. I can flash without the battery, however, without result.
can anybody help me?