Related
Hi all,
First of let me start by saying I have a Mi 9T and I know that it has its own forum, but I didn't find a solution to my problem there, so I thought I'd ask in this forum as well, since the devices look a lot like each other but here are more people.
So my problem is I got stuck in a bootloop which I can't seem to get out of. I can boot into fastboot mode and adb fastboot AND Miflash recognize my device, so I'm able to flash things, but the bootloop still stays.
I started on global rom, and then installed twrp. Then I flashed the latest 9.7.25 ROM from mi-globe for MI 9T. It booted up fine, but my TWRP was removed and I couldn't install it anymore like the first time. For some reason I did a factory reset then. And tried to flash a new ROM by using MiFlash. It said it was succesfull, but it only took 1 second and it didn't automatically boot (it stayed in fastboot mode). I tried again and it said anti-rollback error.
So that didn't work, so I tried flashing boot.img, recovery.img and system,img seperately by using adb fastboot. That worked and it booted normally. I went through the startup configuration like selecting wifi network and gmail,etc. But after trying to set a fingerprint, the screen went completely black but the phone was still on. I could reboot it normally, but when the lockscreen came up or I tried to use fingerprint scanner it went black completeley every time.
I was desperate, so I used 'fastboot erase system -w' in adb fastboot, which is a factory reset apparently. Then I flashed the 3 .img files like I did before, but this time it didn't boot, but went into bootloop.
I also tried 'fastboot boot twrp.img' which also didn't get me into twrp, it just goes to bootloop again.
So to summarize: I CAN get into fastboot and adb fastboot and miflash DO recognize my device, but I can't get out of bootloop no matter what I flash.
Does anyone know a solution for this problem? I would be very thankful.
I also don't understand why flashing or booting TWRP doesn't work, while it worked the first time. I also don't understand why flashing the 3 .img files doesn't work this time, like it used to work the first time.
Btw my anti getvar is 1.
Are you using windows 10? Had same issue with MiFlash and had to use a laptop with earlier version of Windows to get it working
DaveHTC200 said:
Are you using windows 10? Had same issue with MiFlash and had to use a laptop with earlier version of Windows to get it working
Click to expand...
Click to collapse
I do, but I don't have anything else than that. Are you sure that was the problem and not something else?
Rapydax said:
I do, but I don't have anything else than that. Are you sure that was the problem and not something else?
Click to expand...
Click to collapse
I've not had your issue but that was causing the flash tool to just carry out the task in 1 second, which isn't possible
i have the same situation here. did your issue solve?
Yeah, I'm not feeling very smart right now.
Short story:
Accidentally wiped OS in TWRP, now only seem to have access to fastboot. Can I fix this? Flash another ROM? Anything? Bootloader is unlocked, can't seem to get into TWRP anymore. Power + Volume up only takes me to fastboot again.
Long story:
Magisk module caused a bootloop. Wanting to try and avoid a factory reset, I tried sideloading Magisk for TWRP which didn't work, ultimately gave up and wanted to perform a factory reset via TWRP, but I've been working late and ticked the wrong box without thinking. Bad idea, I know. Wiped system, yes.
Aside from feeling exceptionally stupid, can this situation be salvaged? The phone doesn't switch off, it just sits in fastboot. I have Minimal ADB and Fastboot on my PC. Any help will be greatly appreciated, really.
Just in case anyone else ends up with a similar problem, the resolution was fortunately rather straightforward - I needed to grab the Mi Flash tool (as it turns out, this version worked best), stock firmware for my version, go into fastboot (which was no issue as that was the only thing my phone would do) and then open the Mi Flash tool and flashing the firmware was pretty straightforward from there. I even managed to get a BSOD during the process, but it's not like it could get any worse, anyway. Rebooted, restarted the process and about 10-15 minutes later, my phone was happily booting again.
divided by zero said:
Just in case anyone else ends up with a similar problem, the resolution was fortunately rather straightforward - I needed to grab the Mi Flash tool (as it turns out, this version worked best), stock firmware for my version, go into fastboot (which was no issue as that was the only thing my phone would do) and then open the Mi Flash tool and flashing the firmware was pretty straightforward from there. I even managed to get a BSOD during the process, but it's not like it could get any worse, anyway. Rebooted, restarted the process and about 10-15 minutes later, my phone was happily booting again.
Click to expand...
Click to collapse
With Fastboot mode and Mi flash as fail safes , we can flash to our hears content with no worries !
Also a more automated tool is a custom mi flash tool by a developer called XiaimiToolV2 ,which has a dedicated mode for bricked phones or downloads the latest fastboot roms for you.
crs951 said:
With Fastboot mode and Mi flash as fail safes , we can flash to our hears content with no worries !
Also a more automated tool is a custom mi flash tool by a developer called XiaimiToolV2 ,which has a dedicated mode for bricked phones or downloads the latest fastboot roms for you.
Click to expand...
Click to collapse
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
mstaglicic said:
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
Click to expand...
Click to collapse
I had excaxtly that witha my mi5 , completely dead .
Leave it on the charger for a little bit,mine after an unsuccessful flash with mi flash (catastrophic error message) it turned back on.
IF not download XiaomiTool V2 and try the option for bricked phones.
I tried that yesterday but that option is still in development. Only the modifications one is supported currently. As for the issue mentioned, maybe it's really just a matter of charging the phone first. Can't hurt either way.
mstaglicic said:
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
Click to expand...
Click to collapse
Try to use the EDL mode
How to force it to EDL by key combination or maybe deep flash cable ?
My Mi account is authorized for EDL flash but I cant get Mi9 into EDL mode on my PC ( Windows10 )
No OS, but working TWRP
Hi,
I have a similar problem with my mi 9.
I followed a really bad description for the update xiaomi.eu from MIUI10 to MIUI11.
https://www.chinahandys.net/xiaomi-eu-rom-update/
It recomended to wipe alvik / Art Cache, Cache AND System :crying:
So I do not have no OS any more. However, TRWP is still working.
I have a Backup but it did not work :crying:
Is there a better option than the Mi Flash tool?
Please help me!
Since you already have TWRP, download the latest Xiaomi.eu custom ROM available for the Mi 9, which is 9.11.7 to your computer.
Also download the latest TWRP by Mauronofrio from XDA which is 3.3.1-42.
Then use adb to transfer both the ROM and TWRP to your Mi 9.
In TWRP, install TWRP first and manually reboot to twrp using the vol up + power button.
In TWRP, install the ROM, do a factory reset, then finally reboot.
Sent from my MI 9 (Cepheus) using Tapatalk
sangbuana said:
Since you already have TWRP, download the latest Xiaomi.eu custom ROM available for the Mi 9, which is 9.11.7 to your computer.
Also download the latest TWRP by Mauronofrio from XDA which is 3.3.1-42.
Then use adb to transfer both the ROM and TWRP to your Mi 9.
In TWRP, install TWRP first and manually reboot to twrp using the vol up + power button.
In TWRP, install the ROM, do a factory reset, then finally reboot.
Sent from my MI 9 (Cepheus) using Tapatalk
Click to expand...
Click to collapse
Thank you very much for your reply.
When I tried to make my TWRP backup work I had several problems.
First was "vendor read only". So I went in TWRP to "mount" and unticked the "mount vendor partition read-only" (sounds easy, took me some time to find out)
Then I was able to do the restore without error message. However just boot loop and only the possibility to access TWRP.
After some while I realized that this restored the wiped system partition.
So I flashed the aktual MIUI 11 9.11.7 again and rebooted.
And it worked perfectly! :victory:
I did no Factory reset all the time, it seems that everything is perfect!
No lags, no problems with the camera, no issues with auto rotation.
Tom
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
KnowThyPro said:
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
Click to expand...
Click to collapse
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
reg66 said:
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
Click to expand...
Click to collapse
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
KnowThyPro said:
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
Click to expand...
Click to collapse
Any news?
reg66 said:
Any news?
Click to expand...
Click to collapse
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
KnowThyPro said:
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
Click to expand...
Click to collapse
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
reg66 said:
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
Click to expand...
Click to collapse
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
KnowThyPro said:
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
Click to expand...
Click to collapse
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
reg66 said:
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
Click to expand...
Click to collapse
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
KnowThyPro said:
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
Click to expand...
Click to collapse
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
reg66 said:
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
Click to expand...
Click to collapse
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
KnowThyPro said:
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
Click to expand...
Click to collapse
I've been googling for you dude but no joy yet.... will have another look tomorrow
reg66 said:
I've been googling for you dude but no joy yet.... will have another look tomorrow
Click to expand...
Click to collapse
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Sorry bud, really not sure what's going on with your phone or know much more. Good luck with it tho
KnowThyPro said:
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Click to expand...
Click to collapse
Actually, if you now have recovery, what about booting into twrp and flashing lastest 2012.65 zip from asus website, twice - both slots. see if that fixes your wifi issue
As you said using the QFIL approach worked to boot into system and recovery is back - boot to twrp from that state
KnowThyPro said:
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
Click to expand...
Click to collapse
I think my i messed my phone like yours. Can you provide me step by step? I have tried those step one by one but still stuck at rog logo
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks
I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks
I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this
jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Use MTK Bypass for reparing https://megafon929.github.io/mtk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader
Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!
The only solution is to wipe the phone. I got my lesson I will buy a samsung now
Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL
Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.
work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already
I don't want to brick my device yet, is there any stable working twrp recovery? Also I don't have OTG cable so not sure about the twrp in which touch is not working.
sajalkmr said:
I don't want to brick my device yet, is there any stable working twrp recovery? Also I don't have OTG cable so not sure about the twrp in which touch is not working.
Click to expand...
Click to collapse
TWRP
https://forum.xda-developers.com/f/poco-m3-pro-redmi-note-10-5g.12315/?prefix_id=33
What do you want to do with TWRP?
sajalkmr said:
I don't want to brick my device yet, is there any stable working twrp recovery? Also I don't have OTG cable so not sure about the twrp in which touch is not working.
Click to expand...
Click to collapse
twrp doesnt work for a/b devices, they dont have a recovery partition for it so even if a twrp could boot it could be useless and flashing couldnt work if im sure
1lopes said:
twrp doesnt work for a/b devices, they dont have a recovery partition for it so even if a twrp could boot it could be useless and flashing couldnt work if im sure
Click to expand...
Click to collapse
Twrp works perfectly with devices with A/B partitions.
(see threads for Xiaomi series 12 for example).
For Mediatek soc devices there is little or no development whatsoever for roms or Twrp.
The Twrp(s) for this phone are unofficial because the Team Win Recovery Project currently developed by SKKK does not provide TWRP for this device.
https://dl.akr-developers.com/?dir=skkk/TWRP
stay away from twrp for camellia. the risk is damage bootloader (it happened to my phone few days ago), with bootloop. and the only way to solve this mtkcli with phone in brom mode. a difficult procedure. so enjoy your phone without twrp. follow my suggestion
wetito said:
stay away from twrp for camellia. the risk is damage bootloader (it happened to my phone few days ago), with bootloop. and the only way to solve this mtkcli with phone in brom mode. a difficult procedure. so enjoy your phone without twrp. follow my suggestion
Click to expand...
Click to collapse
Seriously?
I have twrp 3.7.x a12 different developer version, I can enter twrp but I don't have mouse, will it damage files or partitions? (fastboot?)
Fungkyy said:
I have twrp 3.7.x a12 different developer version, I can enter twrp but I don't have mouse, will it damage files or partitions? (fastboot?)
Click to expand...
Click to collapse
if u can enter in twrp it's safe
i flashed twrp in boot partition / flash boot. I can already enter, I will flash in the advance menu to save twrp, it's safe right? And Can Back To Boot System?
wetito said:
stay away from twrp for camellia. the risk is damage bootloader (it happened to my phone few days ago), with bootloop. and the only way to solve this mtkcli with phone in brom mode. a difficult procedure. so enjoy your phone without twrp. follow my suggestion
Click to expand...
Click to collapse
Sir please help me I am in the same problem. I unlocked bootloader on Redmi Note 10T 5G and tried to install "Indonesia version of MIUI 14", but It stuck on Empty battery logo and enter into fastboot mode automatically. And show error like "dm-verity corruption" . How do you sloved the proble using mtkcli with phone in brom mode....Kindly help me sir....
vaideesh_narayanan said:
Sir please help me I am in the same problem. I unlocked bootloader on Redmi Note 10T 5G and tried to install "Indonesia version of MIUI 14", but It stuck on Empty battery logo and enter into fastboot mode automatically. And show error like "dm-verity corruption" . How do you sloved the proble using mtkcli with phone in brom mode....Kindly help me sir....
Click to expand...
Click to collapse
try this guide
https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
1lopes said:
try this guide
https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
Click to expand...
Click to collapse
I thought to try the guide given by you. but unfortunately now my phone not entering into fastboot and recovery mode. when I turn on or connect with charger or laptop, it powered on then showing " dm-verity corruption " error and automatically off then repeating the same process. What to do sir...Please help in this
vaideesh_narayanan said:
I thought to try the guide given by you. but unfortunately now my phone not entering into fastboot and recovery mode. when I turn on or connect with charger or laptop, it powered on then showing " dm-verity corruption " error and automatically off then repeating the same process. What to do sir...Please help in this
Click to expand...
Click to collapse
you should try again, but this time, with libusb to filter the usb.
check below:
https://forum.xda-developers.com/t/...ed-after-installing-gsi.4563191/post-88302451
then, retry the same process again.
Ok sir , i will try it...