Ok guys so I need to know if there is a sensor issue with my phone .I don't use auto brightness no more because if you go in the sun the brightness overrides itself to brighter than max brightness and it is the reason why I've had burn in 4 times so far and had to get the screen replaced. But I've also noticed that with auto brightness off but you have the brightness maxed out and go in the sun or shine an led torch at the sensor the screen will kick up to override max brightness sun mode out like when using auto brightness. Is this normal behaviour. Can anyone test this fpr me please .only 6 months left of warranty left
So if this is a feature its stupid ,and make sure you never put your phone on max brightness in manual or autobrightness if out side and it's sunny as it will kick in and cause screen burn .
I've factory reset it and cleared cashe still the screen in manual mode if maxed out in the sun with the brightness maxed out will auto ride to super max brightness mode .im on the oreo uk fm
Phone is uk unlocked note 8.
Anyone? I see lots of views no replys I'm sure everyone that view this thread owns a note 8?
OK lol thanks for the great respone guys smh this place sucks :good:
haircut123 said:
OK lol thanks for the great respone guys smh this place sucks :good:
Click to expand...
Click to collapse
No, this place does not , if you do not get any response , it means nobody has something useful to share, beeing rude will gain you a ban
Maybe your the only person that has this error, so no one has any advice to give other than to factory reset (which you all ready done).
Most people has moved on to other phones. So you'll have to be patient. I say is take it to the Samsung store and see if it is covered under warranty.
I'm not the only person all note 8s do this i think but nobody in this thread owns a note 8 or 9 other than me because they both do it. On both my phones.its a terrible feature as it will cause burn in.if you want to be able to see the screen outside in the sun
So i've been using auto brightness for 2 years, i don't have any burned screen. Last week I've been using phone on sun, taking a lot of pictures (brightness set to auto, on camera app its option to set it to max bright) and still no burnout. I think you should say your problem to guy who will accept your warranty next time
Well this is good to know just went to the sammy service centre and tested the phones they had there with my led torch and they all do it including the s9 plus .so it maybe always was like that or it's been added into a fw.
haircut123 said:
Well this is good to know just went to the sammy service centre and tested the phones they had there with my led torch and they all do it including the s9 plus .so it maybe always was like that or it's been added into a fw.
Click to expand...
Click to collapse
I will add that friend have a s8, his screen is good. Also another friend had note 8 and now note 9, always autobrightness on, no problems so far.
I have a little experiment
1st, I set auto brightness on, turn on a torch on the sensor, brightness go to max, then turn it off, and brightness go to middle (room light on)
2nd, set the auto brightness off, slide the brightness to minimum, turn on the torch to sensor, and brightness remain to minimum, nothing change
So I assume maybe it's a software feature I don't have, you can check with your friend running the same firmware, or you can check using *#0*# on keypad, click on sensor, look for light sensor, and do a simple test, see how much lux you have when you're on direct sunlight, or in a room, then you can flip your phone down / reverse the light source, the lux sensor must be read it on continuous count, as you flip your phone, the number will get decrease
I hope you understand what I am saying, because English is not my native language
ahmadddea said:
I have a little experiment
1st, I set auto brightness on, turn on a torch on the sensor, brightness go to max, then turn it off, and brightness go to middle (room light on)
2nd, set the auto brightness off, slide the brightness to minimum, turn on the torch to sensor, and brightness remain to minimum, nothing change
So I assume maybe it's a software feature I don't have, you can check with your friend running the same firmware, or you can check using *#0*# on keypad, click on sensor, look for light sensor, and do a simple test, see how much lux you have when you're on direct sunlight, or in a room, then you can flip your phone down / reverse the light source, the lux sensor must be read it on continuous count, as you flip your phone, the number will get decrease
I hope you understand what I am saying, because English is not my native language
Click to expand...
Click to collapse
You did the test wrong friend you need to turn off auto brightness and slide the brightness slider to max brightness it must be fully maxed .then shine led torch at the sensor then the brightness overide kicks in and goes even brighter just like In auto brightness mode.but if the slide is not fully maxed it won't do it
haircut123 said:
I'm not the only person all note 8s do this i think but nobody in this thread owns a note 8 or 9 other than me because they both do it. On both my phones.its a terrible feature as it will cause burn in.if you want to be able to see the screen outside in the sun
Click to expand...
Click to collapse
haircut123 said:
Well this is good to know just went to the sammy service centre and tested the phones they had there with my led torch and they all do it including the s9 plus .so it maybe always was like that or it's been added into a fw.
Click to expand...
Click to collapse
Interesting you mentioned all devices do this before you went to the service centre and confirmed it. That admission renders your entire post pointless. If all the devices does this, it means it's not a fault on your sensors or anything on your side, and it means it's indeed just a feature.
Max_Terrible said:
Interesting you mentioned all devices do this before you went to the service centre and confirmed it. That admission renders your entire post pointless. If all the devices does this, it means it's not a fault on your sensors or anything on your side, and it means it's indeed just a feature.
Click to expand...
Click to collapse
I said imo that all devices have this issue. Because bothe my note 8 amd 9 have the same issue .and i found a thread on reddid where 2 others also had the same issue.its not a feature because it can damage the screen it must be a software bug that Sammy need to fix
haircut123 said:
You did the test wrong friend you need to turn off auto brightness and slide the brightness slider to max brightness it must be fully maxed .then shine led torch at the sensor then the brightness overide kicks in and goes even brighter just like In auto brightness mode.but if the slide is not fully maxed it won't do it
Click to expand...
Click to collapse
Ah I see, after doing that, I found out that the screen goes brighter and the colors seem to be fade out
Maybe it will help us to watch better when we got under direct sunlight (I think it's not a bug)
But in real life usage, I have my adaptive brightness turn on, then when I think it's too much bright at the moment, I will manually adjust it to my desire brightness
So that the system will learn the pattern and will apply automatically next time I had the same condition
Doesn't do that with mine and I live in Hong Kong.
Related
Hi all, I was wondering if anyone new how to lower the brightness level to below that of stock, up to the level of night mode if I needed.
I like to do a bit of browsing before I sleep, and the brightness levels even on the lowest hurt my eyes! If anyone knows how to do this I would very much appreciate it. Thanks!
UPDATE: Issue helped, and possibly resolved with the help of my mate Rich @ Geek you Up. Check out his app in my thread:
http://forum.xda-developers.com/showthread.php?t=644649
Dude I'm with you,but I don't think is even possible,and if someone find a way,I would like to increased more for the sunlight.
jongie123 said:
Dude I'm with you,but I don't think is even possible,and if someone find a way,I would like to increased more for the sunlight.
Click to expand...
Click to collapse
Ive been looking at the Auto-Brightness thread and it seems Cyan already knows how to tweek the brightness values, but I dont even know what a github is let alone the deving needed to acheive this.
cyanogen said:
Anyway, the Desire has 10 auto-brightness levels, and the N1 has only 5. These are just an array of lux/brightness values. I put them into my vendor overlay and rebuilt, and I have to say it's much nicer. I'm going to include it in the next CM.
http://github.com/cyanogen/android_...mmit/9dca8ad9cfdbe74eae6961ee805dd8c9523a43c4
Click to expand...
Click to collapse
Cyan if you can help, I would appreciate it!! But understand if the modding is far more important
Like how the brightness dims before the screen auto turns off, or how it is dim when you tap the sleep button in the clock application - these would be good. As for that stock widget that controls the wifi,blutooth,gps,sync and brightness, i never touch it because it messes with autobrightness, but if it could be changed to temporarily go really dim thatd be perfect
jamesyb0i said:
Like how the brightness dims before the screen auto turns off, or how it is dim when you tap the sleep button in the clock application - these would be good. As for that stock widget that controls the wifi,blutooth,gps,sync and brightness, i never touch it because it messes with autobrightness, but if it could be changed to temporarily go really dim thatd be perfect
Click to expand...
Click to collapse
Either my friend! The clock application goes even dimmer than I want, so somewhere in between would be great. But I'm sure that could be customized, I just dont know where to start looking..
I'd be really interested in this too - I like reading in bed before going to sleep, but the wife doesn't like the light being on. I have to angle my nexus slightly away as it is too bright, even at the lowest setting, to have it directly facing me while in a dark room.
Hi!
The automatic brightness on my Xperia Z behaves weird (altough I think it is a bug)
This is what happens:
I have the phone set to "adapt to light conditions" (automatic brightness)
Now when I slide the brightness slider, the brightness changes. But, depending on the setting of the slider, it will not go to full brightness or darkest on its own. When I turn off "adapt to light conditions", it becomes brighter or darker, depending on slider position. But it will never go to 100% on it's own, not even directly under a lamp. It also becomes a little brighter when I turn off automatic brightness and have the slider set to 100%.
Expected behaviour:
I turn on automatic brightness, and put the slider in a, let's say, 60% position. The phone goes to 2% brightness in a pitch dark room (when I read in bed) and switches to 100% when I'm outside in the bright sun. When it does not sense extreme conditions (e.g. sensor reading <20% ambient brightness or >80% respectively; then gradiently going to darkest or brightest gradiently, of course), it aims for the +-60% brightness I specified with the slider.
Conclusion: The slider is an overall threshold for screen brightness and it does not adjust in a 2-100% brightness range, but around maybe +-30% or so around the position the slider is set at. This sucks!
This seems to clearly be a bug, and imho this contributed to the somewhat "not so impressed with the screen" reviews I read before I bought it. Because the screen is really very good if it is set to the correct brightness.
Thanks for the answers!
PS: When I enter the service menu with *#*#7378423#*#* and check the ambient light sensor, it gives me values between 0 and 1000 - so it does definitely work correctly. Build number is 10.1.A.1.350 - I know there is a newer one, but my phone is carrier branded (3 Austria, for that matter) and hasn't been updated yet, unfortunately. Can someone confirm that is is fixed in .434?
x-post from talk.sonymobile.com
I dont think this is a bug. It's been like that on the t, tx, v since they were launched.
LitoNi said:
I dont think this is a bug. It's been like that on the t, tx, v since they were launched.
Click to expand...
Click to collapse
Really? This is almost a deal breaker for me :/ that is a really stupid behaviour, what do I need automatic brightness for if I have to change it myself anyway? I really don't want to care about this miniscule thing on a 600€ device - I expect it to adapt to all conditions.
I didn't want to root it or put a custom rom on it - Sony did a good job with the software as it is, except the automatic brightness.
Sony phone has the best auto brightness
You can find on any phone.
You can say Samsung's auto brightness sucks but not Sony
In auto mode you have the choice to set the minimum brightness level you want and the level will go up depends on the lighting situation and sensor reading.
Yes it has some threshold limitations but it's very sufficient.
Sent from my C6602 using xda premium
gm007 said:
Sony phone has the best auto brightness
You can find on any phone.
You can say Samsung's auto brightness sucks but not Sony
In auto mode you have the choice to set the minimum brightness level you want and the level will go up depends on the lighting situation and sensor reading.
Yes it has some threshold limitations but it's very sufficient.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Sorry, but "best auto brightness" is not what would've come to my mind thinking about the xz and I would never buy a Samsung plastic brick
I had a Nokia N9 previously (that I miss dearly, but the internal 3G antenna was broken so I had to replace it... still by far the best phone I ever owned) and it had exactly the auto brightness behaviour I expected - when I read in the dark, it when down to the lowest possible setting. And when I was in bright sunlight, it went to full brightness wihtout a delay or hassle. I could read it perfectly under any condition and never thought about the settings. The slider only indicated a preferred standard brightness - always had it at 60% and it was perfect.
I really don't understand why other manufacturers wouldn't do it exactly the same way? As I said before, why even have an auto brightness setting if I have to go to settings to adjust it anyway?!?! If I put the slider on 60% and auto brightness on, it burns my eyes in the dark and I can't read it in bright sunlight - I even have to adjust it when the sun shines through my windows at work?!?! WTF Sony?
We are talking android here
I don't know if you had the chance to use gingerbread,froyo....
Maybe android has some limitations.
Sent from my C6602 using xda premium
gm007 said:
We are talking android here
I don't know if you had the chance to use gingerbread,froyo....
Maybe android has some limitations.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
iirc it didn't annoy me (and boy am I picky about details like that! ) on the HTC Magic (up to the last CM that supported it) and the Nexus S I had before the N9... anyway, seems I have to get a decent brightness toggle widget :/ (maybe you can point one out?)
but thanks for your replies!
just for the record and anyone who may find this thread in the future:
I just installed "Auto Brightness" and it seems to work well and has tons of settings. Would have preferred a more native solution... I hope this doesn't drain the battery.
dr. g
I noticed that on my S10e, auto brightness doesnt work as well as it did on my Note 9.
Sometimes I have to manually turn down my brightness if I turn off the lights in my bedroom for example. Or if i turn on the lights, brightness stays on the same level. But if i turn off my phone display then turn it back on, the brightness is suddenly changed.
How well does it work for you guys?
destz0r said:
I noticed that on my S10e, auto brightness doesnt work as well as it did on my Note 9.
Sometimes I have to manually turn down my brightness if I turn off the lights in my bedroom for example. Or if i turn on the lights, brightness stays on the same level. But if i turn off my phone display then turn it back on, the brightness is suddenly changed.
How well does it work for you guys?
Click to expand...
Click to collapse
I have noticed that my S10e is slow to respond to ambient lighting
I have an S10 and to be honest it's hard to say if auto brightness is working how it should. Coming from an LG V30 this phone's display is significantly brighter and especially more apparent when using it in the dark. Even the darkest setting is too bright. I always check the level to make sure auto brightness is working as it should and I guess it is? Either that or it's stuck.
my only comment is that in totally dark room it does not go all the way down , it stays a little bit brighter than normal and than my old iphone x
talking about the s10+
Mohamad Gahed said:
my only comment is that in totally dark room it does not go all the way down , it stays a little bit brighter than normal and than my old iphone x
talking about the s10+
Click to expand...
Click to collapse
yeah same here, and the strange thing is that on my Samsung Note 9 & Samsung S7 it actually used to go all the way down in a totally dark room, but on this phone it doesnt for some reason..
It can take a bit for Adaptive brightness to learn what your favorite settings are like.
Yes, same here, I have s10 and in the dark auto brightness is near to half. Wtf?! I tried to calibrate, no chance. For sure this is a bug. If you go in *#0*# you will see it s writing uncalibrate light sensor
Devhux said:
It can take a bit for Adaptive brightness to learn what your favorite settings are like.
Click to expand...
Click to collapse
nah, on my Note 9 & S7 it worked as it should on the first day i got those phones
there clearly is a problem with adaptive brightness on the S10, anyone with the S10 who had another samsung phone previously will notice that
no, the auto brightness is trash. it sucks. it never gets bright enough even tho i've made adjustments literally daily. it sucks.
Charkatak said:
I have noticed that my S10e is slow to respond to ambient lighting
Click to expand...
Click to collapse
Yup. Same here. Maybe software update will fix this soon.
Even with factory reset it still happened.
Sent from my SM-G970U1 using Tapatalk
x1tymez said:
Yup. Same here. Maybe software update will fix this soon.
Even with factory reset it still happened.
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
I too did factory reset...at least we have tried
Different topic: I will wait for T-Mobile firmware one more day and may possibly return the device back to Samsung and keep my Pixel 2
Charkatak said:
I too did factory reset...at least we have tried
Different topic: I will wait for T-Mobile firmware one more day and may possibly return the device back to Samsung and keep my Pixel 2
Click to expand...
Click to collapse
I got my first update on unlocked version. Why return?
Sent from my SM-G970U1 using Tapatalk
x1tymez said:
I got my first update on unlocked version. Why return?
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
First reason: I want some T-Mobile features what unlocked doesn't provide natively and may require an extra app to function, but if before return window closes, I would be able to find a 100% firmware that would work, then I may not return the device.
Second reason: I don't like the fingerprint on S10e and maybe it is somehow better than S10's implementation, I still have to be more precise than Pixel 2 and other which had the sensor on the back.
Charkatak said:
First reason: I want some T-Mobile features what unlocked doesn't provide natively and may require an extra app to function, but if before return window closes, I would be able to find a 100% firmware that would work, then I may not return the device.
Second reason: I don't like the fingerprint on S10e and maybe it is somehow better than S10's implementation, I still have to be more precise than Pixel 2 and other which had the sensor on the back.
Click to expand...
Click to collapse
Interesting. I came from OnePlus 6t, the in displayed scanner suck kiwi balls. Everytime you switch screen protector you needed to rescan your finger. Lol.
Sent from my SM-G970U1 using Tapatalk
x1tymez said:
Interesting. I came from OnePlus 6t, the in displayed scanner suck kiwi balls. Everytime you switch screen protector you needed to rescan your finger. Lol.
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
Oh, that is not convenient at all. I think the manufacturers are pushing their limits to please customers with new designs/features which in reality hurt the quality of the devices we pay for
I have the S10 plus and the auto brightness seems to be functioning fine. Occasionally in the dark I get thrown off with how bright this screen is. The brightness setting does decrease significantly in the dark but when viewing something with a mostly white background, I have to squint until my pupils constrict to a point where my retinas aren't getting torched. In brighter environments, the brightness level seems to increase accordingly.
Hi guys,
I came across an article about this issue from Aman Jain (Valuetalk) : https://www.valuewalk.com/2019/04/galaxy-s10-auto-brightness-no-issue/amp/
Facing Issues With Galaxy S10 Auto Brightness? Do This
Aman Jain Aman Jain
April 3, 2019 11:42 am
Samsung Galaxy Note 10E
rieo / Pixabay
Galaxy S10 auto brightness
rieo / Pixabay
We have already covered the issues with the proximity sensor in the Samsung Galaxy S10. Now, it appears, one more sensor in the Galaxy S10 is not working as it should. Several users are complaining that the Galaxy S10 auto brightness or the ambient light sensor is not working perfectly.
Galaxy S10 auto brightness – what’s the issue?
Affected users have raised the issue on social platforms and Samsung’s product forums (first spotted by tech site PiunikaWeb). Users complained that the brightness level does not automatically come down in low light. So, they have had to do it manually, but it remains at the set level even when the light is good.
“Sometimes I have to manually turn down my brightness if I turn off the lights in my bedroom for example. Or if i turn on the lights, brightness stays on the same level. But if i turn off my phone display then turn it back on, the brightness is suddenly changed,” one user said.
Further, users also say that with adaptive brightness turned on, the screen goes dark when facing the sun. “White highlights are bright blue, and all colors are distorted. It’s unusable. Spin back around or go into the shade, and the screen comes back to normal,” one user said on Reddit.
Users say that this was not the case with the Galaxy S9, where the auto brightness feature worked perfectly. One user even claims that the Galaxy S10 doesn’t even have a light sensor, instead, maybe there is some in-display sensor that needs a software fix.
“..even if you put your finger on the front camera the auto brightness still moves …..also if you acces this *#0*# you cannot find the light sensor because it’s not there like old samsung phones,” one user said on Samsung’s product forum.
Adaptive brightness to blame
Several users believe that the adaptive brightness is to blame here, and so they have turned it off. However, turning it off is not a solution, and many users agree to that.
“This is a huge problem, and should not be happening on a new phone. The adaptive brightness is a major feature of the phone, and simply turning it off isn’t an option as far as I’m concerned,” one Reddit user said.
It must be noted that Adaptive Brightness came with Android 9. It is an AI based feature that gets better with time. Meaning, it would learn from the interactions that users make with the screen brightness slider, and over time, it would customize the brightness automatically to meet the users’ needs.
Google says that in its testing for Adaptive Brightness, it found that half the test users made fewer adjustments to the slider after a week of using the Adaptive Brightness.
Not an issue, give it some time
Based on Google’s explanation, it seems, users need to give some more time for their phones to adapt to the Adaptive Brightness. Even Samsung’s explanation of the issue with the Galaxy S10 auto brightness is somewhat similar.
“From Android P, a user’s brightness setting pattern is learned, and when the user sets a specific brightness the automatic brightness is controlled to be closer to that specific brightness…… However, when you set the brightness, the brightness can be applied immediately in the short term. If more than 30 seconds after the screen is turned off and the ambient light environment changes by more than 60%, this short term setting brightness will return to the light that was relearned,” Samsung developers say.
Additionally, developers say that users can reset the brightness curve to start the learning process again. To do this, go to Settings – Apps – Show system apps – Device Health Service – Storage – Manage Storage – reset Adaptive Brightness.
All this explanation from Samsung developers and Google could mean that the complaints from users about the Galaxy S10 auto brightness are valid, but it still is not an issue. Things will get better with time as AI learns more about users’ preferences.
Though it is not a bug, affected users do not seem very satisfied as they still have to live with inferior quality images (even if for some time until AI applies the learning).
“Not sure it’s a error to be replicated per se. It’s just an inferior looking quality of image. They will have to make the comparison to see the very obvious difference,” one user said.
ValueWalk
FYI : the brightness sensor is under the screen like the proxity sensor, located bellow the wifi / network icon. It's visible at sun light.
inkortage said:
FYI : the brightness sensor is under the screen like the proxity sensor, located bellow the wifi / network icon. It's visible at sun light.
Click to expand...
Click to collapse
There are actually two light sensors: front and back of the phone.
Unlock the device without pressing the power button and only by placing your fingerprint on the sensor.
The light sensor starts checking the environment light only in this situation
If I keep the brightness to the Maximum, I notice that in bright sunlight/extremely bright indoors, the screen gets Automatically even brighter and dims when the phone notices the environment is not that bright !!!!
You can experiment by shinning a flash on the top right side of the phone with slider on max brightness.
Isnt it stupid – When the user have disabled auto brightness or any power saving modes the phone keeps getting bright and dark
I cant believe Samsung has let it pass this to the production models…
@craige
I think it is intended as you see there's a color RED at the far end of the brightness scale, and that's signifies the most extreme situation the screen can go, which in prolonged use may damage he display. But still, it can provide a elevated readability when you are out under sunlight... And return to safe margins so as to prolong the life of the display...
Sent from my SM-G9730 using XDA Labs
craige said:
If I keep the brightness to the Maximum, I notice that in bright sunlight/extremely bright indoors, the screen gets Automatically even brighter and dims when the phone notices the environment is not that bright !!!!
You can experiment by shinning a flash on the top right side of the phone with slider on max brightness.
Isnt it stupid – When the user have disabled auto brightness or any power saving modes the phone keeps getting bright and dark
I cant believe Samsung has let it pass this to the production models…
Click to expand...
Click to collapse
You posted the same thing on the A50 forum. Which phone are you having the problem on.
therealroyston2 said:
You posted the same thing on the A50 forum. Which phone are you having the problem on.
Click to expand...
Click to collapse
I own A50/A70 and checked this and it also seems to happen on S10 !
I am still getting mad of my phone often getting dim/bright ((
ANY SOLUTIONS ? WHAT U ALL GUYS DOING ABOUT IT !?
Anyone having CameraLightSensor battery drain?
Edit: it is 4g Exynos model, latest firmware
I just checked and I do not see it on mine at all. T-mobile version.
No battery drain on mine either.
Possibly disable the face unlock, its going to save alot of battery for you.
coolmaster121 said:
Possibly disable the face unlock, its going to save alot of battery for you.
Click to expand...
Click to collapse
Don't have it enabled, it seems it is auto brightness
Off topic: could you tell me what kind of SoT you're getting? There are no replies yet in the official thread and I'm interested in the Exynos version.
Pufanu said:
Off topic: could you tell me what kind of SoT you're getting? There are no replies yet in the official thread and I'm interested in the Exynos version.
Click to expand...
Click to collapse
4 hours sot max
dzontra83 said:
4 hours sot max
Click to expand...
Click to collapse
Ouch! That's on 120hz, I assume. I was half-expecting that. Thanks.
Pufanu said:
Ouch! That's on 120hz, I assume. I was half-expecting that. Thanks.
Click to expand...
Click to collapse
Yup, will report tomorrow with auto brightness turned off, because today CameraLightSensor was running in the background for almost 9 hours.
dzontra83 said:
Yup, will report tomorrow with auto brightness turned off, because today CameraLightSensor was running in the background for almost 9 hours.
Click to expand...
Click to collapse
That's definitely not right. Hope you get it sorted out.
Pufanu said:
That's definitely not right. Hope you get it sorted out.
Click to expand...
Click to collapse
I know, don't know where to start, so first step is to disable auto brightness....
dzontra83 said:
I know, don't know where to start, so first step is to disable auto brightness....
Click to expand...
Click to collapse
It definitely seems to be auto brightness, I turned it off, charged the phone to 100%, and today CameraLightSensor it not showing in the battery usage at all.
dzontra83 said:
Yup, will report tomorrow with auto brightness turned off, because today CameraLightSensor was running in the background for almost 9 hours.
Click to expand...
Click to collapse
Same thing on my T-Mobile model - 3.1% over 9 hours. I have not checked my unlocked model, as its still in the box.
Have you noticed the 'ring" of pixels around the camera changing color to black when using the phone? I notice it mostly when browsing the web, or on a phone call.
Hard to describe what it is, but a "ring" about 5 px wide turns black or dark grey around the front camera just for a second. Is that the light sensor thing?
---------- Post added at 12:37 PM ---------- Previous post was at 12:27 PM ----------
Interesting - I read an article about samsung using the camera instead of a sensor in new phones to detect the ambient brightness. The phone will take a picture, adjust the brightness, then the picture is permanently deleted. I guess that flash of the ring around the camera is the phone doing that to see what the light levels are in the room.
I turned off auto brightness and that ring flashing has stopped.
fncd said:
Same thing on my T-Mobile model - 3.1% over 9 hours. I have not checked my unlocked model, as its still in the box.
Have you noticed the 'ring" of pixels around the camera changing color to black when using the phone? I notice it mostly when browsing the web, or on a phone call.
Hard to describe what it is, but a "ring" about 5 px wide turns black or dark grey around the front camera just for a second. Is that the light sensor thing?
---------- Post added at 12:37 PM ---------- Previous post was at 12:27 PM ----------
Interesting - I read an article about samsung using the camera instead of a sensor in new phones to detect the ambient brightness. The phone will take a picture, adjust the brightness, then the picture is permanently deleted. I guess that flash of the ring around the camera is the phone doing that to see what the light levels are in the room.
I turned off auto brightness and that ring flashing has stopped.
Click to expand...
Click to collapse
Definitely when you turn off auto brightness, the CameraLightSensor is not working in the background. But it must be a software glitch, it should be active only when the screen is on, it shouldn't be active while the device is in sleep.
dzontra83 said:
Definitely when you turn off auto brightness, the CameraLightSensor is not working in the background. But it must be a software glitch, it should be active only when the screen is on, it shouldn't be active while the device is in sleep.
Click to expand...
Click to collapse
I spoke too soon. Even with auto brightness turned off, the flashing ring of pixels around the camera still persist. ?
Edit: Sent in an error report along with two of them about the screen sensitivity issues.
Just checked my S20 FE 5G variant and it too has the CameraLightSensor draining at 2.8% for a total background usage of 8hrs and 28 minutes
(Snapdragon)
dzontra83 said:
It definitely seems to be auto brightness, I turned it off, charged the phone to 100%, and today CameraLightSensor it not showing in the battery usage at all.
Click to expand...
Click to collapse
How many hours SOT after auto-brightness is turned off please?
My country will only have the 4G Exynos type too.
fncd said:
I spoke too soon. Even with auto brightness turned off, the flashing ring of pixels around the camera still persist.
Edit: Sent in an error report along with two of them about the screen sensitivity issues.
Click to expand...
Click to collapse
Flashing ring of pixels around the camera???
ChildishSmef said:
Flashing ring of pixels around the camera???
Click to expand...
Click to collapse
Yes - Whether on the home screen, in a call, or in an app, there is a perfect "ring" (if you will) about 3-5 pixels wide around the camera that goes black for a split second or so and then changes back to the color of whatever it was displaying (think background color of a chrome tab, phone call, etc). It's impossible to catch as it happens so quickly. It's almost as if a perfect circle is turning off and then back on. And it has happened on both of my S20 FE, with or without adaptive brightness turned on.
I don't think it's something that screen recorder will even capture since that doesn't show the camera cutout, but I'll try!
EDIT: So I made a screen recording - and I think it was just the troubleshooting I needed to figure out what the problem is (was). . . When recording, the screen never shuts off, so there is no need for Smart Stay to activate (the camera checks to see if you're looking @ the phone to stay on). . . As soon as I stopped screen recording, that ring of pixels turned off and back on as it has been doing. I turned off Smart Stay, and it hasn't happened in the past 10 minutes or so. . .
I wonder if those that are seeing the high CameraLightSensor usage have Smart Stay turned on? It's not on by default - you have to look for it in settings.
fncd said:
Yes - Whether on the home screen, in a call, or in an app, there is a perfect "ring" (if you will) about 3-5 pixels wide around the camera that goes black for a split second or so and then changes back to the color of whatever it was displaying (think background color of a chrome tab, phone call, etc). It's impossible to catch as it happens so quickly. It's almost as if a perfect circle is turning off and then back on. And it has happened on both of my S20 FE, with or without adaptive brightness turned on.
I don't think it's something that screen recorder will even capture since that doesn't show the camera cutout, but I'll try!
EDIT: So I made a screen recording - and I think it was just the troubleshooting I needed to figure out what the problem is (was). . . When recording, the screen never shuts off, so there is no need for Smart Stay to activate (the camera checks to see if you're looking @ the phone to stay on). . . As soon as I stopped screen recording, that ring of pixels turned off and back on as it has been doing. I turned off Smart Stay, and it hasn't happened in the past 10 minutes or so. . .
I wonder if those that are seeing the high CameraLightSensor usage have Smart Stay turned on? It's not on by default - you have to look for it in settings.
Click to expand...
Click to collapse
I have smart stay off, accidentall touch protection off, face unlock off, and from today adaptive brightness off, and my CameraLightSensor is not working in the background when I turned it off. Auto brightness was definitely the culprit for me.