Hello All!
As you know some days ago, I posted a thread about H820 TOT firmwares. Sorry for late. Just wanted to do some clarifications.
Note: I want to clear you all out that all 3 firmwares have been read from my own H820 using a professional tool (Z3X LG Tool).
Code:
**Disclaimer
I am not responsible for any bricked devices.
You are choosing to flash these firmwares.
Use at your own risk. Everything should be clear.
Opinion:
If you are on 6.0.1 then first flash 7.0 and then 8.0 (Step by Step you know).
And use UPPERCUT for flashing. This is my personal opinion. You may know better.
Downloads:
Sorry, links taken down until some solution to all the problems is found.
You are legend. Thanks
is it working does anybody tried?
can you please tell how to flash it step by step?
my software version is H820(10b) can i flash this?
Mateen_ch said:
is it working does anybody tried?
can you please tell how to flash it step by step?
my software version is H820(10b) can i flash this?
Click to expand...
Click to collapse
Yes you can flash. Go to UPPERCUT thread. Download all the required tools from there. All instructions are there.
You really are the king of kings. Excellent work. Now to try it. Thank you!!!
Did anybody try it on their H820? Is it working?
Hello guys
My eng language not good sry for that
Now we have frimware can we root our phone?
bizhan_7x said:
Hello guys
My eng language not good sry for that
Now we have frimware can we root our phone?
Click to expand...
Click to collapse
No, we can't, as the bootloader must be unlocked. By the way, did u try the firmware? is it working?
Akihikoryusuke said:
No, we can't, as the bootloader must be unlocked. By the way, did u try the firmware? is it working?
Click to expand...
Click to collapse
No im not try that
well, i tried to update it with UPPERCUT and have a black screen now.
I selected the file, update and everything went ok, until the last part when it says rebooting, then it turn off and never came back, i waited for an hour and nothing happend, but windows stills detect it .
I will try to use this metod https://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508 but dont know if it will work
So UPPERCUT is throwing me a goddamn invalid command response answer and the damn phone is bricked. Thank you.
---------- Post added at 06:54 PM ---------- Previous post was at 06:52 PM ----------
And the firmwares are corrupted I think as the LGFirmwareExtract tool can't identify, I can't even brute force the firmware to flash
Akihikoryusuke said:
So UPPERCUT is throwing me a goddamn invalid command response answer and the damn phone is bricked. Thank you.
---------- Post added at 06:54 PM ---------- Previous post was at 06:52 PM ----------
And the firmwares are corrupted I think as the LGFirmwareExtract tool can't identify, I can't even brute force the firmware to flash
Click to expand...
Click to collapse
If firmware is corrupted, then how LG Firmware Extract tool is loading all the partitions from TOT?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Akihikoryusuke said:
So UPPERCUT is throwing me a goddamn invalid command response answer and the damn phone is bricked. Thank you.
---------- Post added at 06:54 PM ---------- Previous post was at 06:52 PM ----------
And the firmwares are corrupted I think as the LGFirmwareExtract tool can't identify, I can't even brute force the firmware to flash
Click to expand...
Click to collapse
If firmware is corrupted, then how LGFirmwareExtract tool is loading all the partitions from TOT?
fahadboss said:
If firmware is corrupted, then how LGFirmwareExtract tool is loading all the partitions from TOT?
Click to expand...
Click to collapse
It isn't working for me. Strange
---------- Post added at 09:06 PM ---------- Previous post was at 08:53 PM ----------
fahadboss said:
If firmware is corrupted, then how LGFirmwareExtract tool is loading all the partitions from TOT?
Click to expand...
Click to collapse
Sorry bro, is there anyway I can bring my phone to life or force flash the files? :'(
Akihikoryusuke said:
It isn't working for me. Strange
Click to expand...
Click to collapse
If your phone is detecting by pc or goes to download mode, you can try SALT utility for LG which works on linux.
You can found easily on XDA in Android Software Development and Hacking section.
Here is thread:
https://forum.xda-developers.com/android/software-hacking/tool-salt-lg-revolution-t3717864
Akihikoryusuke said:
So UPPERCUT is throwing me a goddamn invalid command response answer and the damn phone is bricked. Thank you.
---------- Post added at 06:54 PM ---------- Previous post was at 06:52 PM ----------
And the firmwares are corrupted I think as the LGFirmwareExtract tool can't identify, I can't even brute force the firmware to flash
Click to expand...
Click to collapse
Try this firmware..... i hope this will fix your bricked device...
LGG5 ATT V11n
@fahadboss Can you make a video flashing your device? At least prove this works for you. Many Thanks.
fahadboss said:
If firmware is corrupted, then how LGFirmwareExtract tool is loading all the partitions from TOT?
Click to expand...
Click to collapse
I also tried LGFirmwareExtract tool and it can't identify the firmware, you checked if the compresed tot is ok? (I apologize for my poor english)
Huh ... Thank to Allah ... My pc did not detect device otherwise i also flash my device and may also face device bricked situation ... Need some experts to look at this problem...
Ok, I intended to help community but things went wrong. I don't want damage for anyone.
So, I am taking down links for now. Until I flash them on my own device and see if it goes well or not.
Sorry.
Related
Hi guys, I've been trying to send back my Droid 3 to Verizon, but every time I do the 1_click_SBF.exe the Android guy doesn't respond, and I get a "Master Clear error"-Operation Failed.
I think I may of bricked the phone. I get 0 connection to the network, and I also had failed aborted updates to the newest version multiple times and I don't know what to do.
Sorry if this is the wrong place to post this but I am sincerely at a loss.
any help is appreciated
-Ronen91
Which SBF are you using? If you upgraded to 906 the 890 SBF won't work.
I believe 890 it would not let me update to the new software. I originally flashed from 906, and I'm now stuck on a broken 890 sbf.
Is there another way I can install a working sbf and delete all possible signs of root and get it working again?
System Version: 5.6.890.XT862.Verizon.en.US
Model Number: Droid 3
Android Version: 2.3.4
Baseband Version: Unknown
Kernel Version: 2.6.35.7-g5fa4155 [email protected] #1
Build Number: 5.5.1_84_D3G-55
ERI version: Unknown
PRL version: Unknown
I can't dial 611 I can't do anything I get a "emergency calls" No Network is available. Only emergency calls are allowed.
The activation doesn't occur, it just goes straight to a google account creation
So what are my options to get the phone back into condition to send back to verizon?
Can it flash the radio at least?
Android guy doesn't respond,
Click to expand...
Click to collapse
what android guy? phone needs to be in 'AP Fastboot Flash Mode'
this is android recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is 'AP Fastboot Flash Mode'
hold volume down & power, to boot
---------- Post added at 05:07 PM ---------- Previous post was at 04:59 PM ----------
or is error on pc? when you click on the one click exe
did you rename to 1_CLICK_SBF.exe ?
MrObvious said:
Can it flash the radio at least?
Click to expand...
Click to collapse
I don't exactly know what you mean by that
@sd_shadow
No I simply meant by when you begin to activate a new phone you have to touch the android guy to begin activation, it just doesn't respond, and goes to Google log in settings.
The 1_click_sbf.exe file worked fine the first time I did it from the root. The phone and network was working. Once I tried to update the phone to 906 the update failed, and I've been stuck in limbo
http://forum.xda-developers.com/showthread.php?t=1406812
@Shadow
I'm sorry but what exactly am I supposed to follow after the link?
I'm very bad with directions =(
it was a response to
Originally Posted by MrObvious
Can it flash the radio at least?
Click to expand...
Click to collapse
Originally Posted by Ronen91
I don't exactly know what you mean by that
Click to expand...
Click to collapse
instructions on how to flash radio.img are in first post
http://forum.xda-developers.com/showthread.php?t=1406812
and you have tried one click again,
you are wiping data and cache?
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
verifying md5 check sum
---------- Post added at 07:05 PM ---------- Previous post was at 07:04 PM ----------
of one click.exe and update.zip?
@Shadow
Do I need to flash the radio, or are you just telling him you can definitely flash the radio?
Also, I'm currently charging it. How would I go about clearing the cache and wiping the data?
I think I ****ed up big time
if you never wiped data or cache, that is likey your problem or part of the problem
Android system recovery <3a>
with phone off
hold X & power, when you see triangle, !, & Andy, press both volume buttons
then scroll with volume buttons, select with power
---------- Post added at 07:12 PM ---------- Previous post was at 07:10 PM ----------
Ronen91 said:
@Shadow
Do I need to flash the radio, or are you just telling him you can definitely flash the radio?
Click to expand...
Click to collapse
if wiping data, does not help you could try, flashing radio.img
I would verify md5 check sums for one click.exe and update.zip first
---------- Post added at 07:17 PM ---------- Previous post was at 07:12 PM ----------
1_CLICK_SBF.exe?dl=1
md5: 1c6d32e2e54c720daa6bbb3886d15c5c
906 update.zip
MD5 Sum: 8dcb7b93e2b4e4f3f44e99b24faab1ae
it's posted for a reason
I'm so dumb I just did it on my new replacement phone by accident and thought i fixed the issue
/facepalm
Hey, LONG time reader. My Nexus 5 just broke, so I had to stop at best buy for something in the interim. Knowing that I putz with phones too much to not have a stock rom to fall back on, I pulled my stock system image and boot files and made my own. I couldn't post in Dev, cause I'm new-ish.
Changes made:
De-odexed
Zip-aligned
Rooted
If you have any issues, post them below. I have only tested this on my own T-Mobile D415. Unsure if it will work on other phones.
blah blah blah, no warranty. yatta yatta,
Link: Can't post yet. It's on Android File Host under my name. Will update when I reach 10
FlotsamRefuge said:
Hey, LONG time reader. My Nexus 5 just broke, so I had to stop at best buy for something in the interim. Knowing that I putz with phones too much to not have a stock rom to fall back on, I pulled my stock system image and boot files and made my own. I couldn't post in Dev, cause I'm new-ish.
Changes made:
De-odexed
Zip-aligned
Rooted
If you have any issues, post them below. I have only tested this on my own T-Mobile D415. Unsure if it will work on other phones.
blah blah blah, no warranty. yatta yatta,
Link: Can't post yet. It's on Android File Host under my name. Will update when I reach 10
Click to expand...
Click to collapse
Hey could you help me?
I have a D410, I have extracted the KDZ and got the system.img as usual, well I want to make some changes, what software have you used to extract the .img? I have one but I always get an error about unknown format. Thx.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jasonmerc said:
Just to let everyone know, I tested NFC on the 9/10 build and it apparently does not work. Now, Ive never used NFC before so I may just be doing it wrong, but maybe others can test this.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
... Does this phone even have NFC?
---------- Post added at 12:57 AM ---------- Previous post was at 12:56 AM ----------
Lol ^ sorry about that, what I meant to say is that your folder shows 0 files
FlotsamRefuge said:
Link: Can't post yet. It's on Android File Host under my name. Will update when I reach 10
Click to expand...
Click to collapse
It most definitely is not, sadly. Empty folder. Would love to install this!
Yup I'm on board as soon as you upload this, thank you!
CleanSweep93 said:
Yup I'm on board as soon as you upload this, thank you!
Click to expand...
Click to collapse
Agreed. It would be a lot easier than flashing the KDZ.
https://docs.google.com/file/d/0B7v5kvD2I-LDT3hhc1Y3TXd0VDA/edit?usp=docslist_api
---------- Post added at 02:53 AM ---------- Previous post was at 02:52 AM ----------
There you go, stock ROM. Flash it on CWR, won't flash stock recovery or boot loader so you get to keep your cwr
Daisuke1988 said:
https://docs.google.com/file/d/0B7v5kvD2I-LDT3hhc1Y3TXd0VDA/edit?usp=docslist_api
---------- Post added at 02:53 AM ---------- Previous post was at 02:52 AM ----------
There you go, stock ROM. Flash it on CWR, won't flash stock recovery or boot loader so you get to keep your cwr
Click to expand...
Click to collapse
Thank you very very much!! Am currently downloading. I'll come back tomorrow when I have more like to give!
FlotsamRefuge said:
Hey, LONG time reader. My Nexus 5 just broke, so I had to stop at best buy for something in the interim. Knowing that I putz with phones too much to not have a stock rom to fall back on, I pulled my stock system image and boot files and made my own. I couldn't post in Dev, cause I'm new-ish.
Changes made:
De-odexed
Zip-aligned
Rooted
If you have any issues, post them below. I have only tested this on my own T-Mobile D415. Unsure if it will work on other phones.
blah blah blah, no warranty. yatta yatta,
Link: Can't post yet. It's on Android File Host under my name. Will update when I reach 10
Click to expand...
Click to collapse
How do i flash this? right now i m rooted using towelroot ,stock recovery
InfinitusDesigner said:
Hey could you help me?
I have a D410, I have extracted the KDZ and got the system.img as usual, well I want to make some changes, what software have you used to extract the .img? I have one but I always get an error about unknown format. Thx.
Click to expand...
Click to collapse
Use android kitchen.
help with my LG L90 D415
FlotsamRefuge said:
Hey, LONG time reader. My Nexus 5 just broke, so I had to stop at best buy for something in the interim. Knowing that I putz with phones too much to not have a stock rom to fall back on, I pulled my stock system image and boot files and made my own. I couldn't post in Dev, cause I'm new-ish.
Changes made:
De-odexed
Zip-aligned
Rooted
If you have any issues, post them below. I have only tested this on my own T-Mobile D415. Unsure if it will work on other phones.
blah blah blah, no warranty. yatta yatta,
Link: Can't post yet. It's on Android File Host under my name. Will update when I reach 10
Click to expand...
Click to collapse
Myphone wont bring a 3G network since i inserted sim different from the default T-Mobile sim. pls help on this and also it takes upto 3hours to boot up. help on these two issues, thanks in advance
Need Help Rooing
I have been searching treads like crazy! I just got a LG-D415 and used every single rooting tool.. yet did the new OTA update first not thinking.. now none of the tools will root. I even used the new towelroot thing which most people said works. I hate not having a rooted phone and don't feel like waiting for the tools to update to cover my OTA update.. is there anyway around this? I figured installing the stock rom would fix it but it seems to install that you need root for twrp/cwm and I can't find any signed roms to install on the factory stock recovery.
Spookykid666 said:
I have been searching treads like crazy! I just got a LG-D415 and used every single rooting tool.. yet did the new OTA update first not thinking.. now none of the tools will root. I even used the new towelroot thing which most people said works. I hate not having a rooted phone and don't feel like waiting for the tools to update to cover my OTA update.. is there anyway around this? I figured installing the stock rom would fix it but it seems to install that you need root for twrp/cwm and I can't find any signed roms to install on the factory stock recovery.
Click to expand...
Click to collapse
Use LG root script v1.2
LG_Root_Script_by_avicohh.exe
IT IS SUPPOSED TO ROOT STOCK LOLLIPOP ALSO
Hello Everyone here ,
i have Motorola Moto G 2nd 2014 , 8Gb , Single Sim , global GSM XT-1063
its now working on the last Update 5.0.2 Lollipop and i really need to get it back to stock 4.4.4 ?!
its very lag and Format Don't do will too
i need help to find Stock 4.4.4 and how to flash it ! step by step " i'm new with Motorola software"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its not a good Idea to downgrade ur firmware u can try any easy installer
vaisakmct said:
Its not a good Idea to downgrade ur firmware u can try any easy installer
Click to expand...
Click to collapse
why its not good idea ? (i was do it with Samsung Phones ) but here i want to know how to do it
please try to help me with that :crying: :crying:
i need to get back to 4.4.4
Up Up , any help guys ?
a7med $oft said:
Up Up , any help guys ?
Click to expand...
Click to collapse
USE THE EASY INSTALLER not this firmware
http://www.filefactory.com/file/1d5jrwgq2lzj/RETUGLB_XT1063_4.4.4_KXB21.85-23_cid9_CFC.xml.zip
this is firmware you need - you need to install via fastboot - theres no easy installer made for this (yet)- cant make untill school run done..... approx 2hrs from now
---------- Post added at 08:27 AM ---------- Previous post was at 08:13 AM ----------
vaisakmct said:
Its not a good Idea to downgrade ur firmware u can try any easy installer
Click to expand...
Click to collapse
err no ANY easy installer will break phone -- It needs the correct version for xt1063 -- I normally dont support xt1063 on kitkat but am making it and uploading
---------- Post added at 08:30 AM ---------- Previous post was at 08:27 AM ----------
XT1063 Easy Installer 4.4.4 RETUGLB
download to pc - unzip to pc - READ instructions - run from pc via USB cable in AP FASTBOOT mode
this is NOT a flashable zip for TWRP -- ALL done from PC
---------- Post added at 08:35 AM ---------- Previous post was at 08:30 AM ----------
a7med $oft said:
Up Up , any help guys ?
Click to expand...
Click to collapse
it requires a UNLOCKED BOOTLOADER to downgrade.. this will void any warranty ..... at OWN RISK! - untested as I dont own a xt1063 but should work as commands and file naming / structure the same
reefuge said:
USE THE EASY INSTALLER not this firmware
http://www.filefactory.com/file/1d5jrwgq2lzj/RETUGLB_XT1063_4.4.4_KXB21.85-23_cid9_CFC.xml.zip
this is firmware you need - you need to install via fastboot - theres no easy installer made for this (yet)- cant make untill school run done..... approx 2hrs from now
---------- Post added at 08:27 AM ---------- Previous post was at 08:13 AM ----------
err no ANY easy installer will break phone -- It needs the correct version for xt1063 -- I normally dont support xt1063 on kitkat but am making it and uploading
---------- Post added at 08:30 AM ---------- Previous post was at 08:27 AM ----------
XT1063 Easy Installer 4.4.4 RETUGLB
download to pc - unzip to pc - READ instructions - run from pc via USB cable in AP FASTBOOT mode
this is NOT a flashable zip for TWRP -- ALL done from PC
---------- Post added at 08:35 AM ---------- Previous post was at 08:30 AM ----------
it requires a UNLOCKED BOOTLOADER to downgrade.. this will void any warranty ..... at OWN RISK! - untested as I dont own a xt1063 but should work as commands and file naming / structure the same
Click to expand...
Click to collapse
Sorry i can't gt any point from that ! its for my bad English for sure
but i don't have any Warranty and if something happen to it , no one here can fix it
i use in Samsung phones to Odin and put the Room in Odin and put it in Download mode and Start and Boom its finish and its work fine
i searching alot and get tired from searching and i found that
http://forum.xda-developers.com/moto-g-2014/development/original-motorola-firmware-collection-t3153533
but i found alot of 4.4.4 for my xt1063 i don't know witch one to chose it and how to flash it , and what 's that Fastboot MOD and what's is that easy installer ??
and sorry again i'm not that much good in English and hope to Explain more , thanks guys
Why no one can help me and tell me how to flash stock ROM !!! Up up
a7med $oft said:
Why no one can help me and tell me how to flash stock ROM !!! Up up
Click to expand...
Click to collapse
Why you can't look for topics about flashing the stock firmware???
zman01 said:
Why you can't look for topics about flashing the stock firmware???
Click to expand...
Click to collapse
i really do this man ,, i keep searching but i can't understand things
"""
Instructions 4.4.4:
1. Download 4.4.4 and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder [mfastboot Download: http://goo.gl/lTYq4F]
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
"""
i'm now have the firmware of XT1063 and this Pic of it
but
i can't find mfastboot cuz the link do not work
and i can't understand what have to do in point number 4 its about commands ?
so please anyone help me with that and explain it more to me
WHAT TO DO NEXT !!
You just have to install the correct usb drivers for the phone and run the easy installer .bat file and it will flash the driver automatically.
This rom will get your phone back up and running!!
!!WARNING!!
I'm not responsible or liable for anything that may happen to your phone if you download and install this firmware!
This is a WORK IN PROGRESS!!!
Please feel free to help me make this rom better!
P.S.
This is not a STOCK ROM I was lucky enough to build one from parts and pieces of other stock firmware's that are available for download. Only use this rom if you turned your SM-S920L into a $200.00 bookmark!. As of right now there is no Stock firmware for this device and lots of other straight talk phones also.
Get It Here!!
Little Different ROM???
Lame. I wouldn't donate for a stock rom even if it did exist.
***EDIT***
Ok, so I see you removed the donate link, but the google drive link is not currently working. Is this a custom rom? If so, I don't think I'd be willing to risk my phone without a working custom recovery to backup and restore my phone should something go wrong.
So, I am guessing this is the stock ROM?
what is is s920l ?
juancapo9999 said:
what is is s920l ?
Click to expand...
Click to collapse
Samsung Galaxy Grand Prime
...
Just wondering how to install without custom recovery?
---------- Post added at 11:16 PM ---------- Previous post was at 11:04 PM ----------
Medfordite said:
So, I am guessing this is the stock ROM?
Click to expand...
Click to collapse
No its not stock it says so in the op post it is in fact a custom ROM
---------- Post added at 11:37 PM ---------- Previous post was at 11:16 PM ----------
Anyone have any news on recovery and custom ROM for this phone
I'm assuming this needs to be flashed with Odin.
any screenshot?
Pictures of ROM
juancapo9999 said:
any screenshot?
Click to expand...
Click to collapse
I Bricked my SM-S920L after rooting then loading my usual apps, but when installing XPOSED FRAMEWORK after the reboot, no sound and locked at the Straight Talk (Blue) loading screen. Trying to wipe cache or doing a factory reset was usless.///..//>>?? It was a goner with no help anywhere!! But was always able to get into download mode! If this happens to you, then you might find my Frankenstein ROM useful. I was able to make calls but no WiFi or LTE or 3G. So use this ROM as last resort only!!! And yrs Use whatever ODIN version you like...
P.S. if your having problems downloading from Google Drive, I will place it elsewhere. Let me know. Also it took me a long time to get this ROM put together so a thanks would be greatly appreciated!
Good luck and happy ROMing!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brekstar said:
I Bricked my SM-S920L after rooting then loading my usual apps, but when installing XPOSED FRAMEWORK after the reboot, no sound and locked at the Straight Talk (Blue) loading screen. Trying to wipe cache or doing a factory reset was usless.///..//>>?? It was a goner with no help anywhere!! But was always able to get into download mode! If this happens to you, then you might find my Frankenstein ROM useful. I was able to make calls but no WiFi or LTE or 3G. So use this ROM as last resort only!!! And yrs Use whatever ODIN version you like...
P.S. if your having problems downloading from Google Drive, I will place it elsewhere. Let me know. Also it took me a long time to get this ROM put together so a thanks would be greatly appreciated!
Good luck and happy ROMing!
Click to expand...
Click to collapse
hey your image not wiew, plis post new image
Pics Here
juancapo9999 said:
hey your image not wiew, plis post new image
Click to expand...
Click to collapse
Pic's SM-S920L
Pic's here!
juancapo9999 said:
hey your image not wiew, plis post new image
Click to expand...
Click to collapse
https://drive.google.com/open?id=0Bz0FuWF9yY7LVUtYd2QtWmZNcjg
brekstar said:
Pic's SM-S920L
Click to expand...
Click to collapse
hey archive blocked
---------- Post added at 03:24 AM ---------- Previous post was at 03:22 AM ----------
is stock rom
Hey Brekstar, are you by chance still working on this? Do you have a way of extracting the stock Rom?
Koenji said:
Hey Brekstar, are you by chance still working on this? Do you have a way of extracting the stock Rom?
Click to expand...
Click to collapse
Get Chainfires Flashfire app and do a full RAW backup. Compress it any which way you like and upload it. From there I can try to compile a bootable rom for us (I'm desperate and now have some knowledge to do so...as close to factory as possible, please!
Sent from my HTCD200LVWPP using Tapatalk
adrwill2000 said:
Get Chainfires Flashfire app and do a full RAW backup. Compress it any which way you like and upload it. From there I can try to compile a bootable rom for us (I'm desperate and now have some knowledge to do so...as close to factory as possible, please!
Click to expand...
Click to collapse
I would if i had the knowledge to do it. Just looked into it and seems a little bit advanced for me, sorry.
hello try to this post :
http://forum.xda-developers.com/gra...t/cm-13-android-6-0-1-grand-prime-sm-t3291892
this post help you to install custom rom on grand prime sm-g530h and other . . .
adrwill2000 said:
Get Chainfires Flashfire app and do a full RAW backup. Compress it any which way you like and upload it. From there I can try to compile a bootable rom for us (I'm desperate and now have some knowledge to do so...as close to factory as possible, please!
Sent from my HTCD200LVWPP using Tapatalk
Click to expand...
Click to collapse
I can do this if you are still wanting the RAW backup.
There are tons of things to backup according to the app, do you know which ones you want?
I will post it online once I get the backup made.
Medfordite said:
I can do this if you are still wanting the RAW backup.
There are tons of things to backup according to the app, do you know which ones you want?
I will post it online once I get the backup made.
Click to expand...
Click to collapse
The partitions needed would more than likely be from Normal Backup type, but he's asking for full or Force Raw Backup, in case of a wiped partition that would render a bootup impossible
Run a normal backup for now, just to get the OP's backup replaced so that a last resort ROM could work as daily driver :fingers-crossed:
Is this still being worked on?
I tried running the SP_Flash tool which ended up in the phone turning on while running the tool and failing, now every time i turn on the phone it gets stuck in the white screen with the logo in black, and at the bottom left corner it says TOOL DL Image FAIL! Your help will be greatly appreciated. Thank You
Maybe as of now. best option is to follow this post.
http://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
I assumed you followed the restore thread posted by tomsgt, and on that thread there are a few posts having same issue as you
Tomsgt appears to have released a guide that is bricking phones! Oh no! If you have bricked your phone, please join the hangout below where we will cooperate with you to investigate the cause of your bricks and attempt to find a fix.
Join the conversation on Hangouts: https://hangouts.google.com/group/Q5wGs6508l1rqGng2
Sent from my LG G4 using XDA Labs
mrmazak said:
Maybe as of now. best option is to follow this post.
http://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
I assumed you followed the restore thread posted by tomsgt, and on that thread there are a few posts having same issue as you
Click to expand...
Click to collapse
No i used this method
https://www.youtube.com/watch?v=KMobKWfZbJg
I used the flash tool to download a recovery onto the phone which ended up in the phone being stuck in boot. Thank you for responding
Take it for what its worth, but i was getting that error constatnly trying to flash my R1 originally, had to change to a differnt usb port. and it worked like a charm. (I was using front case ports, went to using back mobo ports)
It seems this problem has been abandoned.
I did encounter this error before, some time after the OP asked about it. My original answer to the problem was a bit too generic and not really helpful.
In my case each time I encountered this "TOOL DL image FAIL!" -- it seemed to be caused from bad connection at usb cable.
A second download from the sp flash tool fixed it.
also I noticed that I had better success rate of recovering from fail error when I flashed
1-lk.bin
2- boot.img
3- system
all together at same time.
==>>here is my back up of out of box version 6.1 --
IF YOU DID A FORMAT ALL FROM SP FLASH TOOL , THIS IS NOT THE PACKAGE YOU NEED.
DO NOT DO FORMAT ALL--- IT WAS NOT NEEDED
Hello friend do the repair as you indicated, but I am still presented with the same error "TOOL DL image FAIL!" Could help me how to proceed
jotaj2504 said:
Hello friend do the repair as you indicated, but I am still presented with the same error "TOOL DL image FAIL!" Could help me how to proceed
Click to expand...
Click to collapse
The other method I used to flash past this error was to use miracle box to do the flashing.
https://forum.hovatek.com/thread-13894.html
tool dl image fail
Hello friends, I have this problem: I have a r1 hd r0010uu, I had released it from the Amazon junction and I had changed the recovery and root. I made a hard rest and stayed brick, I tried to revive it with the instructions of ColtonDRG, mrmazak, rootjunkysdl and I could not. I use a .zip file with sptool and it comes out TOOL DL image FAIL! And try with the miraclebox and nothing. Friends need help. If they have a complicated .zip with sptool that works thank you very much:crying::crying::crying::crying::crying::crying::crying::crying::crying:
jotaj2504 said:
Hello friends, I have this problem: I have a r1 hd r0010uu, I had released it from the Amazon junction and I had changed the recovery and root. I made a hard rest and stayed brick, I tried to revive it with the instructions of ColtonDRG, mrmazak, rootjunkysdl and I could not. I use a .zip file with sptool and it comes out TOOL DL image FAIL! And try with the miraclebox and nothing. Friends need help. If they have a complicated .zip with sptool that works thank you very much:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I have the same problem, could you solve it?
no man no fix problem
---------- Post added at 06:07 PM ---------- Previous post was at 05:08 PM ----------
hello mrmazak, I'm jotaj2504 I had previously asked for your help in the forum xda, https://forum.xda-developers.com/r1-hd/help/tool-dl-image-fail-blu-r1-hd-t3440261. at the end I did not keep insisting because I bought a cell phone and replaced it. but recently that plate was burned and I have again reinstalled the original plate. Well now I need your help again. the phone is blu r1 hd R0010uu 8 rom / 1 ram, amazon version which was corrupted in oem through the steps and files of RootJunky / Tom. the recovery was replaced by trwp. in a data cleaning the phone was bricked. because it does not block the boot. I do not know if you remember but you had a copy of your phone in miracle box. which try to install with it but if I succeed. I was giving TOOL DL image FAIL !. Could you please help me recover the cell phone? I have read many forums on the subject but I have not yet been able to fix it.
if it can be fixed with sp_tools I thank you.
jotaj2504 said:
no man no fix problem
---------- Post added at 06:07 PM ---------- Previous post was at 05:08 PM ----------
hello mrmazak, I'm jotaj2504 I had previously asked for your help in the forum xda, https://forum.xda-developers.com/r1-hd/help/tool-dl-image-fail-blu-r1-hd-t3440261. at the end I did not keep insisting because I bought a cell phone and replaced it. but recently that plate was burned and I have again reinstalled the original plate. Well now I need your help again. the phone is blu r1 hd R0010uu 8 rom / 1 ram, amazon version which was corrupted in oem through the steps and files of RootJunky / Tom. the recovery was replaced by trwp. in a data cleaning the phone was bricked. because it does not block the boot. I do not know if you remember but you had a copy of your phone in miracle box. which try to install with it but if I succeed. I was giving TOOL DL image FAIL !. Could you please help me recover the cell phone? I have read many forums on the subject but I have not yet been able to fix it.
if it can be fixed with sp_tools I thank you.
Click to expand...
Click to collapse
@jotaj2504 please continue asking for help here. And stop sending me PM.
In response to your last statement/ question. I do not understand what you said.
25/5000 ??
SOORY
mrmazak said:
@jotaj2504 please continue asking for help here. And stop sending me pm.
In response to your last statement/ question. I do not understand what you said.
25/5000 ??
Click to expand...
Click to collapse
ok i'm sorry, it 's saving is that i see your message and i do not do it i'll write you for the post. Sorry i am from venezuela. And i do not know where it is?
---------- Post added at 03:33 AM ---------- Previous post was at 03:10 AM ----------
HI SR THE ARCHIVE THAT YOU MANDATED TO DOWNLOAD GIVES ME ERRO IN THE SCATTER, BUT INSTALL sp-flash-bkup-no-nv-v17.zip | by mrmazak for Generic Device / Other androidfilehost.com, THE ONE UNDER ONE OF THE FORUMS YOUR XDA. I INSTALL THEM WITH THE SP TOOL AND INSTALL IT, THE TELECONO BUT DOES NOT GIVE THE TOOL DL image FAIL, HOW TO SOLVE THE PROBLEM
jotaj2504 said:
ok i'm sorry, it 's saving is that i see your message and i do not do it i'll write you for the post. Sorry i am from venezuela. And i do not know where it is?
---------- Post added at 03:33 AM ---------- Previous post was at 03:10 AM ----------
HI SR THE ARCHIVE THAT YOU MANDATED TO DOWNLOAD GIVES ME ERRO IN THE SCATTER, BUT INSTALL sp-flash-bkup-no-nv-v17.zip | by mrmazak for Generic Device / Other androidfilehost.com, THE ONE UNDER ONE OF THE FORUMS YOUR XDA. I INSTALL THEM WITH THE SP TOOL AND INSTALL IT, THE TELECONO BUT DOES NOT GIVE THE TOOL DL image FAIL, HOW TO SOLVE THE PROBLEM
Click to expand...
Click to collapse
what problem?
something might wrong with translation. You say
"THE TELECONO BUT DOES NOT GIVE THE TOOL DL image FAIL"
sorry my english is not good and I use google translator.
the phone turns on, BUT the display shows: TOOL DL image FAIL. That is the problem, how do I solve it?
jotaj2504 said:
sorry my english is not good and I use google translator.
the phone turns on, BUT the display shows: TOOL DL image FAIL. That is the problem, how do I solve it?
Click to expand...
Click to collapse
What was the error with scatter file on the link i sent other day?
this isThis is the error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 07:46 PM ---------- Previous post was at 07:43 PM ----------
This is the error
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
---------- Post added at 07:47 PM ---------- Previous post was at 07:46 PM ----------
This is the error
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
---------- Post added at 07:48 PM ---------- Previous post was at 07:47 PM ----------
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
jotaj2504 said:
this isThis is the error
---------- Post added at 07:46 PM ---------- Previous post was at 07:43 PM ----------
This is the error
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
---------- Post added at 07:47 PM ---------- Previous post was at 07:46 PM ----------
This is the error
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
---------- Post added at 07:48 PM ---------- Previous post was at 07:47 PM ----------
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
Click to expand...
Click to collapse
I see the scatter file in that backup is not correct made.
use scatter from other v17 backup with those files.
now I get this error
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
jotaj2504 said:
now I get this error
https://lh3.googleusercontent.com/-...fNS9c3vMuhHsP6dwCJoC/w530-h298-n-rw/error.jpg
Click to expand...
Click to collapse
try this scatter., and the files from the mediafire link.