{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Afraid to install that high performance 3D Game because your device just won't take it ? ,Want to rock Asphalt Legends on Ultra Graphics? Got no time to charge your device on the run?Or Maybe You Just Want to Embrace your Device Reborn. Behold!. "The eXtreme kernel" .. here to lift your desire for performance and battery beyond limits and measures.. and to the "eXtreme" you deserve more than" Stock ". you deserve "eXtreme" . unleash the true power of your device like never before, while you can. why live the stock life when u can go all the way "extreme!!"
Full Changelog!
-Reworked source
-Fixed Audio
-Fixed Wifi
-Fixed Bootloop on EU ROM
-Extended GPU Table
-Stable GPU OC to 770 MHz
-Devfreq Boost
-Cpu input Boost
-fsync on/off support
-F2FS Support
-DisplayOC to 75 Hz
-Lot TCP Algorithms (westwood,veno,yeah..)
-300 Hz TImer for Best Performance and Battery
-Battery and Performance Improvments
-USB Fast Charge
-GPU idle timeout set to 64 ms
-Use LZ4 compression instread of lzo
Note:If you want DIsplayOc to work you must flash provided patched dtbo image with fastboot!
Note1:flashing dtbo might break wide-angle camera though
Note2:if you get Error like unknown ramdisk compreesion flash magisk before installing kernel!
-More Features Soon!
-Flash at your own Risk!
TESTERS:
idontknowausername
Patrontrox
justintime
Get it from our Download Center
Donate to the Developer!
eXtreme Kernel Poco Telegram Group
XDA:DevDB Information
[Kernel][Stable][GPU OC][MIUI & CUSTOM] eXtremeKernel V2.1 for MI-9
Contributors
Alek Dev,
Source Code: https://github.com/eXtremeKernel/mi9
Version Information
Status:Stable
Stable Release Date: 2019-03-10
Created 2019-03-01
Last Updated 2019-03-21
Reserved Post
Donation made... Succes,!
That Was faaaast. Thanks. Anyione tested it yet?
Is the kernel going to be the same for both Chinese ROM and Global ROM? Works on both versions or just one or the other?
EniGmA1987 said:
Is the kernel going to be the same for both Chinese ROM and Global ROM? Works on both versions or just one or the other?
Click to expand...
Click to collapse
Kernel js Compatible with All Miui Versions also Custom Roms too
will test this when i unlock the bootloader. 300 hours left
nosidefcp said:
will test this when i unlock the bootloader. 300 hours left
Click to expand...
Click to collapse
thanks i'm waiting!
china jay chou said:
View attachment 4716982
Click to expand...
Click to collapse
backup your current boot image and flash the boot image that i posted or contact me on telegram @AlekDev
eXtremeKernel V0.2 is pushed on download center
https://downloads.extremekernel.xyz/
Changelog:
-Fixed Wifi
-Boeffla WakeLock Blocker
-KCAL Support
-Display Oc to 65 Hz
-GPU OC to 605 Mhz (experimental!)
-fsync on/off support
Please Test and tell me!
display overclock huh? Thats pretty interesting. I always wanted to try the Razer Phone's 120Hz display but didnt want to spend the money just to try it out. Do you think the electronics in this will go higher than 65Hz? Or is that the limit from your testing?
I will be trying out your kernel as soon as my phone gets here, but unfortunately that might be a while for the Transparent Edition :/
EniGmA1987 said:
display overclock huh? Thats pretty interesting. I always wanted to try the Razer Phone's 120Hz display but didnt want to spend the money just to try it out. Do you think the electronics in this will go higher than 65Hz? Or is that the limit from your testing?
I will be trying out your kernel as soon as my phone gets here, but unfortunately that might be a while for the Transparent Edition :/
Click to expand...
Click to collapse
well depends of the quality of the panels but i think mi9 can go to 70hz
Sent from my POCOPHONE F1 using Tapatalk
Hey Guys!
Well here is some exciting Good News the GPU OC seems working fine it improved GPU score 5K+ more on antutu benchmarks (currently 610 MHz-25 MHz more than Stock Freq) i think we can go higher but for that i will need more testers and yeah motivation too
Also Currently i have done Display OC to 65HZ to the ea8076 panel since currently i got that panel if there is others i will OC it too maybe we can go higher too this will make damn lot smoother experience
The Benchmark was Done with Governor to Performance and DIsable Fsync but keep in mind also Device is throtlled about Higher Temps ,Anyway with Hard Work we can Unleash the Beast of MI-9 and hit probably 400k+
Anyway Working Blindly Is very Hard so Keep in Mind that doing this stuff is hard without device,The fundrase campaign is Open and i appearicite every donation!,You can Donate here:
https://downloads.extremekernel.xyz/fund.html
Thanks for your Support!
Lot more stuff Coming Soon!
going higher [emoji41]
Sent from my POCOPHONE F1 using Tapatalk
First Stable Version of eXtremeKernel is OUT-Based on Latest Xiaomi Source
-Working Wifi
-GPU OC to 645 MHz and Tuned Freq Table
-Display OC to 65Hz (currently ea8076 panel)
-fsync on/off support
-More Features Soon!
-Flash at your own Risk!
Get it from our Download Center
Donate to the Developer!
eXtreme Kernel Mi-9 Telegram Group
Mi-9 Global Telegram Group
@Alek Dev
I haven't even bought the mi9 (but soon will) and I already love this Kernel. Not that I am complaining, but 855 GPU is already more than strong enough (like 50% faster than the Mali in s10 exynos, and even that is more than enough for any games on playstore). I say: dont push your luck with further GPU oc (u may fry your chip ;-( and that would be bad for us all cus then no further development of this kernel ) but rather see if the CPU can go higher. If yes, then exynos won't have anything on this 855..
sensationvsgalaxy said:
@Alek Dev
I haven't even bought the mi9 (but soon will) and I already love this Kernel. Not that I am complaining, but 855 GPU is already more than strong enough (like 50% faster than the Mali in s10 exynos, and even that is more than enough for any games on playstore). I say: dont push your luck with further GPU oc (u may fry your chip ;-( and that would be bad for us all cus then no further development of this kernel ) but rather see if the CPU can go higher. If yes, then exynos won't have anything on this 855..
Click to expand...
Click to collapse
CPU can't be overclocked only Gpu...Anyway i'm carefully sending and testing values so no frying chips be sure
Alek Dev said:
CPU can't be overclocked only Gpu...Anyway i'm carefully sending and testing values so no frying chips be sure
Click to expand...
Click to collapse
oh really? Thats very odd. Is it a matter of you cant access multipliers for the CPU(s)? And issue with the bigLittle config of the chip?
Do you have access to the base clock the whole things runs on? Maybe you could do tests with raising that which would increase the CPU cores, GPU, RAM speed, and ai cores.
EniGmA1987 said:
oh really? Thats very odd. Is it a matter of you cant access multipliers for the CPU(s)? And issue with the bigLittle config of the chip?
Do you have access to the base clock the whole things runs on? Maybe you could do tests with raising that which would increase the CPU cores, GPU, RAM speed, and ai cores.
Click to expand...
Click to collapse
Well no access to anything about CPU,but Gpu oc is damn good and we hit 400k today [emoji3]
Sent from my POCOPHONE F1 using Tapatalk
Related
OK, i know what you're thinking, "Another kernel for the Vibrant?" But this is my very first kernel development project so bear with me. This is just a project i've been working on since summer started, just to see if i can do it, learning experience. If you don't like it, you don't have to use it so please no flaming....and as always:
I (NOR TEAM WHISKEY) WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR PHONE BEFORE, DURING, OR AFTER FLASHING THIS. PLEASE READ ALL NOTES AND WARNINGS, FOLLOW DIRECTIONS, MAKE A NANDROID, HAVE ODIN READY, AND FLASH AT YOUR OWN RISK!!!
Features: (NEW IN V2.2)
-FPS cap completely removed (should help with you 3D gamers)
-More EXT4 patches
-Removed unnecessary code in patches
-Some debugging removed (should help with battery life & speed)
-Went back to stock voltages from v1, but still user configurable (to bring back stability)
-Now available in Kernel Manager app in the market.
------------------------v2.1----------------------------------------
-Retweaked HZ values, should now be as smooth and responsive as v1 was
-Added Juwe's RAM optimization script into flash package
-Added pieces of SpeedMOD
-Fixed a few bugs in Makefiles
--------------------------v2-----------------------------------------
-Voodoo Sound v10
-New Skull splash screen
-Compiled with optimized compiler flags (thanks drhonk)
-Added "Interactive" governor
-Added "Smartass" governor from DragonMODz (thanks ECOTOX)
-Screen Off profiles working on 400/100 with and/or without setCPU using Smartass
-Retweaked voltages table, -25UV across the board
----------------------------v1--------------------------------------------
Voodoo lagfix
Voodoo sound v9
Voodoo color
BLN = Back Light Notifications
LowMemoryKiller patch
Modified Kernel HZ value from 260 to 500....for smoothness and responsivness
TinyRCU
BFQ I/O scheduler (set to default)
CFQ removed
Battery polling values modified (an attempt at saving batt life)
JHash3 patch
EXT4 patches
Modified FPS (Increased, not removed)
333MB Ram Hack
User configurable OC/UV
Safe booting to 1ghz
Overclockable to 1.2 ghz
Avatar confirmed working with this and Bionix NextGen V2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes:
1. After flashing this and rebooting, let the phone sit for a few minutes, before doing stuff. It will be alot smoother,
trust me.
2. This safely boots to 1ghz, but use an app like Voltage Control or setCPU to UV/OC to meet your needs.
3. If using Smartass as the main gov, DO NOT USE A SCREEN OFF PROFILE. After extensive testing, Screen Off profile is NOT needed if using Smartass as main gov (Smartass can handle it, if your phone can handle Smartass)
4. Not all phones can handle the Smartass gov, if this is the case, just switch the the Conservative gov again.
My downloads will be hosted from Google Code now, so i can track number of downloads and issues, so:
Download Immortality v2.2 here: Download
Kernel Source Now Available here: Source
Wanna donate to my FFC fund for my services? Hit this donate button!!
Credits:
drhonk - For having patience and answering all the dumbass questions i had
ttabbal- also For having patience and answering all the dumbass questions i had
My beautiful fiance - for believing in me, and letting me do this
ECOTOX - For his sources from DragonMODz
supercurio - For all his work on Voodoo
coolbho3k - For SetCPU
xan - For his Voltage Control app (get the free version in the Market, buy his Extreme Version for more features)
neldar - for BLN
Paul McKenney - for TinyRCU
hardcore - for reference on Ram hack and battery tweaks \ SpeedMOD
cmenard - for having a baddazz kernel and references in sources
grendel905 - for having a baddazz kernel and references in sources
Juwe - RAM optimization script
s0niqu3 - Kernel version MOD
Skitz - Torture testing beta versions
Anyone else i forgot, let me know
Nice job! Trying it out now
Edit: seems to work flawlessly...very quick and responsive
Project-V vrs1
Are you going to make a GB kernel because right now there is only one, it is a great kernel but there is only one.
ali1276 said:
Are you going to make a GB kernel because right now there is only one, it is a great kernel but there is only one.
Click to expand...
Click to collapse
I'll think about it, i'm still learning
Next on the list is a 1.4ghz overclock kernel, but i'll see how you guys like this one.
Mr. Apocalypse said:
I'll think about it, i'm still learning
Next on the list is a 1.4ghz overclock kernel, but i'll see how you guys like this one.
Click to expand...
Click to collapse
Like it one.... after about 10 min, very, very very smooth and responsive
Thank You
Great job on this.extremely responsive and im loving it.great job for an artist. Lol..going to play around with set cpu at work and let you know how it works out.keep up the great work.you should rewrite that post because it sounds to negative for this bad ass kernel
ali1276 said:
Are you going to make a GB kernel because right now there is only one, it is a great kernel but there is only one.
Click to expand...
Click to collapse
A good gb kernel is talon kernel over in the cappy thread nice job!
Sent from my SGH-T959
Good job, man! I'm coming from Bali and I have to say that this is really responsive and snappy! Bali would freeze up every so often, but I'm not having any issues with this so far. It'll be interesting to see how much battery life it'll get.
I'll post later with my experience with it. I'm liking it so far though
Sent from my SGH-T959 using XDA Premium App
Came from Bali kernel and running Nextgen V2. This kernel is BAD!! So smooth and very responsive. Awesome job on this project.
Sent from my SGH-T959 using XDA App
I prefer SetCPU for its user-friendly interface and settings, but if I have to, I'll download Voltage Control for this.
Will this work with ETD Project V rom?
sumasage said:
Will this work with ETD Project V rom?
Click to expand...
Click to collapse
it SHOULD work on all 2.2 and 2.2.1 ROMs, but i havent tested it yet
I can confirm its running on trigger 3.3. Seems pretty good so far. Nice work!!
Trigger 3.3
Running great so far, but using voltage control...the kernel seems to never fall below 800 mhz and 1200 voltage comes up as undetected. I'm running it on conservative, noop, slider on 1200. Saved settings and rebooted a few times...crunching battery right now because of it.
Am I missing something or just had too many beers? Lol
<('.'<) ^( '.' )^ (>'.')>
draychi said:
Running great so far, but using voltage control...the kernel seems to never fall below 800 mhz and 1200 voltage comes up as undetected. I'm running it on conservative, noop, slider on 1200. Saved settings and rebooted a few times...crunching battery right now because of it.
Am I missing something or just had too many beers? Lol
<('.'<) ^( '.' )^ (>'.')>
Click to expand...
Click to collapse
try switching to the BFQ scheduler, and give the batt a good cycle before judging the battery, OCing can do that, thats why it boots to 1ghz by default
Yea, I always let new flashes run a few cycles...but the cpu is still running high and I'm not sure why...
<('.'<) ^( '.' )^ (>'.')>
sumasage said:
Will this work with ETD Project V rom?
Click to expand...
Click to collapse
^beep beep your bus is here^
Project-V vrs1
draychi said:
Yea, I always let new flashes run a few cycles...but the cpu is still running high and I'm not sure why...
<('.'<) ^( '.' )^ (>'.')>
Click to expand...
Click to collapse
the cpu is gonna run high a bit, especially if its OC'ed, my phone is dropping down to 400mhz, but i'll look into it if it becomes a major problem for people
I love the kernel but the the bootimage is kinda "Ehh"
philliple97 said:
I love the kernel but the the bootimage is kinda "Ehh"
Click to expand...
Click to collapse
It had a skull, but I changed it at the last minute, too many people would've complained
Sent from my XDA app cuz I'm stalking your mom....
Hi, a friend came by and asked me to optimize his tegra. Thanks for faux123, we have an OC kernel. Made the following changes
1. Added JRCU with lazy to optimize RCU implementation of dual cores
2. Made INTERACTIVE (not powersave) default by making changes in cpufreq drivers
3. Made noop default (can be changed in ROM)
4. Overclocked settings from 216mhz - 1400000 mhz with voltage from 750mv - 1350 mv
5. AVP/VDE overclocked to 300000 mhz
6. GPU overclocked to 400000 mhz
7. Memory speed set at 333000mhz
8. Optimized utilization of dual-cores (cpu0 and cpu1) by making changes in how cpu1 is called.
9. Reverted a few changes in the overclocking code
Again, thanks to faux123 he saved me a lot of time and made things a lot easier.
WARNING:
These timings are pretty aggressive and might not work for your atrix that is why I called it elite (fortunately my friend's Atrix handled the timings pretty well) so please backup.
-----------------------------------------------------------------
-----------------------------------------------------------------
Update: 2/6/2012
1. Increased cyanogen overclocked speed to 1.6ghz!!!
Link:
www.tunerspotter.com/clemsyn/Ultimate1.6eliteCyano.zip
-----------------------------------------------------------------
-----------------------------------------------------------------
Update: 1/30/2012
1. Updated to 2.6.32.55 (Thanks faux123)
2. Build for ATT and Cyano at 1.5 GHZ
ATT 1.5 ghz kernel
www.tunerspotter.com/clemsyn/ClemsynATT1.5elite.zip
Cyanogen 1.5 ghz kernel
www.tunerspotter.com/clemsyn/ClemsynCyno1.5elite.zip
BTW, if you like my work, please
and help me buy some diapers. Thanks.
-----------------------------------
-----------------------------------
UPDATE: 1/28/2012
1. Increased overclocked to 1.5 ghz
2. Only for Cyanogenmod ROMs at the moment
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.5kernel.zip
-----------------------------------------------------------------
-----------------------------------------------------------------
UPDATE:
1. Updated to 2.6.32.48 with faux123 optimizations and changes
2. Added 1.0 ghz kernel for both att and cyanogenmod
3. Added a few optimizations in interactive governor to improve CPU sleep and wake
4. Added 1.4 ghz for att
5. Added 1.4 with aggressive memory timings for Cyanogen
ATT VERSION 11/22/2011
1.0 ghz ELITE version
www.tunerspotter.com/clemsyn/ClemsynATT1.0elite.zip
1.4 ghz ELITE version
www.tunerspotter.com/clemsyn/ClemsynATT1.4elite.zip
Source
www.tunerspotter.com/clemsyn/kernel2.tar.gz
--------------------------------------------------------------------------
CYANOGEN VERSION 11/22/2011
1.0 ghz ELITE version Cyanogen
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.0.zip
1.4 ghz ELITE version Cyanogen
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.4.zip
1.4 GHZ Elite version with a more aggressive memory timings Cyanogen
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.4memorytimings.zip
BTW, if you like my work, please don't hesitate to click on the donation button under my sig and help me buy some diapers It will be appreciated. Thanks.
------------------------------------------------------------------------
------------------------------------------------------------------------
Older version
www.tunerspotter.com/clemsyn/ClemsynCyanogenElite.zip
I suggest you use system tuner in the market to tweak voltages/governor/io scheduler and SD cachesize
SOURCE : www.tunerspotter.com/clemsyn/kernel.tar.gz
BTW, if you want 1ghz or 1.2 ghz max overclock here are the steps.
Install system tuner ==>Tweaks===> CPU and bring the top slider down to your desired speed (1ghz or 1.2 ghz) and that will prevent the phone from going higher your desired speed
BTW, if you like my work, pls dont hesitate to click on the donate button under my sig. Thanks.
It says "elite", but do you know how many people are going to flash this (that shouldnt be flashing this) and flood this thread with "noob questions"?
God speed my friend, God speed...
andrew.cambridge said:
It says "elite", but do you know how many people are going to flash this (that shouldnt be flashing this) and flood this thread with "noob questions"?
God speed my friend, God speed...
Click to expand...
Click to collapse
I have no issue with noob questions, BTW, I am a kernel dev for Gtablet, Adam and Asus Transformer so this is not my first release and I am familiar with the kernel code for the tegras
Any wifi issues?
Sent from my MB860 using XDA App
Took it for a spin just now. -100mv on all levels undervolt. Quadrant completed 3x with no issues. Best score was 5024
On nightly 19
*edit* 150 and 200mv under lock my phone instantly but -100 on all levels seems rock solid and the phone feels snappy. Ill report back tomorrow night after a day of normal use (unless something else to flash comes out)
Sent from my MB860 using Tapatalk
Whoever tries this kernel out, please post back results of what its currently doing and a few days after. I would personally try it but, my phone needs to be stable for my job and college.
Sent from my Atrix XDA Premium App
Voelker45 said:
Whoever tries this kernel out, please post back results of what its currently doing and a few days after. I would personally try it but, my phone needs to be stable for my job and college.
Sent from my Atrix XDA Premium App
Click to expand...
Click to collapse
Flashed this on nightly build #20 ended up not booting so I cleared the caches again and next restart put me in an endless bootloop. Restored my backup gonna try a different cyanogen build with this. Anybody who has success please let everyone know what cyanogen build you are on? Gonna try this with the weekly build next.
flashing now. will update back.
Sweet Welcome!
Awesome. UVed -170 on all for now. -175 randomly rebooted after a couple minutes. Gonna work myself down until it's stable. Knowing that every step is going to be UVed to the max 100 mV limit makes UVing a LOT easier. You only have to worry about the top step.
d11dog11 said:
Took it for a spin just now. -100mv on all levels undervolt. Quadrant completed 3x with no issues. Best score was 5024
*edit* 150 and 200mv under lock my phone instantly but -100 on all levels seems rock solid and the phone feels snappy. Ill report back tomorrow night after a day of normal use (unless something else to flash comes out)
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
I couldn't go past -100 either but it was stable at that level. Pretty solid Antutu ratings: 6539, 6767, 6774
I'm sure if I pushed it I could do better, however that hammered stability pretty well. We'll see how it goes battery-wise as well. Thanks for the upload!
Is there any chance you can make a 1.5ghz version? Not for all use but it would be fun to have. I know Kholk has one so isn't it possible?
Successfully flashed. I notice smoother screen transitions and scrolling. Not placebo, as the previous at 1.45 ghz had a very slight lag time when swiping to a different home screen. Also nice bench score on cf-bench (7800s) Thank you very much!
Just it UV'd -150 on all, hammering CF-bench. Looking pretty stable so far, and I like how it handled Quadrant earlier, I saw some positive spikes in FPS and it was smoother overall. I don't put much stock in Quadrant tests but nonetheless. Will throw up some Nenamark test as soon as I'm done hammering CF-bench.
faux123 said:
Sweet Welcome!
Click to expand...
Click to collapse
Big Thanks to you I won't be developing much for the atrix since I just developed it for my friend but I just wanted to share what I made. Currently uploading the source (Ive got a really slow internet)
clemsyn said:
Big Thanks to you I won't be developing much for the atrix since I just developed it for my friend but I just wanted to share what I made. Currently uploading the source (Ive got a really slow internet)
Click to expand...
Click to collapse
It gives us something to play with. I'm more of a 1.0GHz Blur-oriented ROM user but I like new toys, and thank you for uploading it for us junkies.
BravoMotorola said:
Is there any chance you can make a 1.5ghz version? Not for all use but it would be fun to have. I know Kholk has one so isn't it possible?
Click to expand...
Click to collapse
I actually though about pushing it to 1.6 ghz but was very hesitant since I didn't own the device and it didn't have enough room in there the disipate the heat. I just played safe with 1.4 but 1.5 should be no issue. If I get the chance to get the atrix again, I'll try to push it to 1.6 and make one for att gingerbread.
Nenamark 1: 57.2fps
Nenamark 2: 27.5fps
Great scores for an Atrix!
clemsyn said:
I actually though about pushing it to 1.6 ghz but was very hesitant since I didn't own the device and it didn't have enough room in there the disipate the heat. I just played safe with 1.4 but 1.5 should be no issue. If I get the chance to get the atrix again, I'll try to push it to 1.6 and make one for att gingerbread.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashed... running fine so far, will report back. THANKS TO THE OP & FAUX!
Sent from my Atrix awaiting CM9....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A Kernel For ZUK-Z1 based on Cm14.1 Branch
I will not be responsible for any damage to phone.
Click to expand...
Click to collapse
I do not work for money. I work for my Pleasure and Happiness which I get from developing, I will never ever ask you to donate me but if ever you like my work please press a THANKS which really motivates me to bring more STuFF!!! .
Click to expand...
Click to collapse
Features:
Code:
[B][U]UKM support(synapse)
Kcal control by [user=4316709]@savoca[/user] (Ton thanks for making this)
Faux Sound Control
Simple GPU Algorithm (faux123)
CPU OC fixed - OC upto 2.88 ghz(yet not working )
Adreno Idler
Thermal Conflicts Fixed
Power-Efficient Qorques
ZUI thermal
bunch of governers
Speed and pvs levels exposed
MSM Limiter. - per core control
Deep Sleep enabled
new IO schedulers
New TCP controllers
State Notifier Driver
Random
Uc 268 mhz (Battery Saver)
Lowered GPU voltages
More flashlight intensity for better photos..
Hotplug boost, wakeup boost
Cpu boost drivers
Multiple core. Power. Saving
Memory scaling Control (mSc) to optimize writing
Adreno idler
LED control
Kernel sample merging (KSM)
Lz4 compression. For faster boot
Hot plugs -
ONLY MSM MP_DECISION
INTELLI_PLUG (Basic Version)
[B][COLOR="Blue"]Both are enabled at the boot. My Bad! Please disable any one of them through kernel management app before using the kernel![/COLOR][/B]
Much more..
[/U][/B]
Credits
cyanogen team
@ak
@Megatron007 ( A good Friend of Mine. Helped me however, whenever I wanted. Because Of him this became possible )
@savoca for kcal
XDA
@acuicultor another good friend who fixed the oc
@franciscofranco for. His flawless. Job
@faux123 for his kernel. Commits...
Please Let Me know if someones missing out there
Bugs
None
This kernel is Stable for now.. No major bugs except SeLinux... It should work with all the Cm14.1 based roms. Nd about features, i will add them step. By step to. Make the kernel most stable and battery friendly.. Will keep this thread up time by providing all updates whenever necessary.
Source code -
PHP:
[URL="https://github.com/Andy1911/AndyKernel_ZukZ1"]here! [/URL]
Download Links -
20170310 - Grab it here!
Video recording fixed
20170118- Grab it Here!
-Added bunch of governers
-New optimizations regarding mutex sched and others..
-cpu quiet introduced along with zen decision
- msm bricked and intelli hotplug s also make new way with optimizations.
People can review it and have a look and tune kernel according to their needs..
20161213 - Grab it Here!
- Msm Simple. Thermal
- Only zzmoove governer
- Bricked Hotplug
- Msm Hotplug
- Franco Sound Gain
- Camera no debug logs
- Sound Asoc Optimization
- Voltage change of headphones from 2.5uA to 3.5uA for better sound
- SoT not over 6 hours...
For best results... Stay on Bricked hotplug plus have the conservative governer.. If you want to have zzmoove as your governer, turn of the hot plugs.. Make the frequency to 268 mhz.
20161204 - Grab it here!
After many days of optimizations and changes I made this.. This contains a lot more features than the previous. Thanks for the idea of cpu quiet by acuicultor..
- added simple thermal driver
- added some vibration tweaks
- added new cpu quiet hotplug
- caf branches merged
- new firmware support added
- charging mah a bit increased. U may feel fast charge now.
- toolchain switched to 4.9 Linaro
- WiFi Fixed
20161113(Revised V2) - Grab It Here!
Brought about more commits initially ported from Oneplus one (Check the github)
Added Intelli_Plug Basic Governer
Added Splash Logo now (From Ak)
*The Reason Remains the Same* Stability
Recommended to use with Kernel Adiutor App
20161111 - Grab it here!
LOT OF CHANGES
Removed charge level.
Removed hotplugs
Removed voltage control
Removed Intelli Thermal
Added mpdecision by showP
Added ZUI thermal mechanism
Fixed many warnings
click here to see detailed optimizations added for. Msm8974
The aim was to optimization, stability, performance, battery life ... Hope you enjoy
20161109- Grab it here!
Initial release
OMG... 2,88Ghz O.O
Thanks ! I download it now !! ????
trying..!
Overclock frequencies not running... Trying to figure out the problems.. People are free to send pull requests if they can help
Regards
Andy
Thanks a lot.....
A very huge salute to your work....
Please add kexec hard boot patch also(for multi rom)
Yeah.. Sure.. For now it is kept aside. Because over clocking the device was the main aim.. I will first fix the oc stuff with @acuiculator and then WIll add the kexec patch back...
Regards
Andy
Sometime over clocking freq. doesn't show in kernel auditor ...try synapse app...
Btw I am happy to see you here man....I know you from mmx a116 days ....
tech mashido said:
Sometime over clocking freq. doesn't show in kernel auditor ...try synapse app...
Btw I am happy to see you here man....I know you from mmx a116 days ....
Click to expand...
Click to collapse
Me too.. Have done Grt work for a116.
tech mashido said:
Sometime over clocking freq. doesn't show in kernel auditor ...try synapse app...
Btw I am happy to see you here man....I know you from mmx a116 days ....
Click to expand...
Click to collapse
Yeah.. Thanks.. And oc frequencies doesn't work... We need to work out on that... Actually all the credits goes out to @acuiculator who made oc possible.. The dtb file was not booting atall... So hats off to him...
Regards
Andy
I am using default settings for this kernel. Booting is quick.. But games like asphalt stutter. Do u suggest any other settings for this kernel for balanced performance.?
Yeah.. Select a different governer and enable gaming boost in synapse. Planning to add lionheart governer. Gave good results on opo
Regards
Andy
Andy1911 said:
Yeah.. Select a different governer and enable gaming boost in synapse. Planning to add lionheart governer. Gave good results on opo
Regards
Andy
Click to expand...
Click to collapse
Fingerprint looks quick though..
Thanks
Andy1911 said:
Yeah.. Sure.. For now it is kept aside. Because over clocking the device was the main aim.. I will first fix the oc stuff with @acuiculator and then WIll add the kexec patch back...
Regards
Andy
Click to expand...
Click to collapse
Thanks a lot for response.....
Waiting...
Really thanks for this kernel
Can anyone help me to understand kernel term ???
Unable to overclock its a bug ??
Do anyone have better performance and battery life than radioactive kernel ?
facuzukz1 said:
Do anyone have better performance and battery life than radioactive kernel ?
Click to expand...
Click to collapse
No comparison. He is my good friend.. We work together... Thing is he is adding features and i optimize the builds... You can use his nuclear rom and kernel.. Even his kernel is a good option.. No comparison.. ??
REGARDS
Andy
Hey all... After many days and nights of work.. Compiled back again... This build lacks features as the may be hazardous.. Charge level interface was removed. Normal stock charging logic is too good.. Voltages already set to optimal. And no necessaries of hotplug... I have added showP original msm mp_decision which is real good one.. And stable one around.. Speaking about governer they have been kept as it is. Choice of people what to use..
Now talking about other changes.. I have searched for hell lot more msm8974 devices and finally I made a club combination of all the patches and changes for optimizations. You can have a change feel of what is done in my git source which is also now an Independent repo. You all may or may not understand the fundamentals of these commits made. Nor you may experience a gigantic performance improvements and battery life.. In short these are the lubricating the processor commits... They are meant to run the cpu GPU and all other components too smooth.. I will surely add some more of them... All other msm8974 devicee are too ahead of the race and we need to catch those.. This device is a beast and will overcome all the things I bet you.. All the best and thanks for such positive responses
Here is the link for download - http://forum.xda-developers.com/showpost.php?p=69524934&postcount=2
Do see the git and fell free to send pull requests..
Regards
Andy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Faster Smarter Cooler (FSC) .. A well balanced Snapdragon 810
Code:
** Your warranty is now not void.
**
** I am not responsible for bricked devices, dead SD cards, thermonuclear
** war, You take the full responsibility of your actions
**
Update July 31, 2018
This thread is marked as discontinued. This means that It won't be updated so don't bother asking and I will not publish any more posts here or contribute to the general discussion. However, I might add files from time to time if necessary.
How it works
The default thermal cooling mechanism on Sony flagships isn't very efficient. This MOD basically starts throttling the frequencies gradually at certain optimal temperatures allowing the device to cool-down faster while maintaning a good performance.
Main advantages
- Improved overall performance
- Less heat & faster cool down
- Maintain a consistent performance for extended periods of time
- Prolonged camera usage, video recording
- Suitable for daily usage & gaming
Compatibility
Code:
- Xperia Z3+ Z4 Z5 (All variants)
Downloads
[URL="https://forum.xda-developers.com/xperia-z5/development/mod-fsc-1-0-dont-sacrifice-performance-t3670586"]https://forum.xda-developers.com/xperia-z5/development/mod-fsc-1-0-dont-sacrifice-performance-t3670586
Performance Benchmarks (Attached below)
OUTDATED
I know It's a phone not a PC but it's an accurate way to see how well we can handle stress
The following tests are done at room temperature on Xperia Z5 E6653 using the following set-up :
- RR ROM
- Kernel by @zacharias.maladroit NovaCore_I.1_n_1_10_C_1_6_3
Two consecutive tests each time are done with no delay between for : Stock thermal engine, FSC, FSC+
More tests for stock ROM/KERNEL can be found HERE
Instructions
- Flash the zip
- Reboot and enjoy
Extras
- Use a more reliable kernel, for LOS,Carbon,RR,crDroid I recommend latest by @zacharias.maladroit
I highly recommend my LKT™ Mod .. very smooth and battery friendly on Z5
Telegram : https://t.me/FSC_XDA
Thanks for your contribution to this community.
One question, why did u remove GPU control from emmc therm 0? This doesn't seem a very good idea to me, because from my testing it seems the GPU is generating the most heat.
I have made a thermal mod too, a while ago. Look it up, it's somewhere on XDA (too lazy to search, lol)
I'll keep an eye on this interesting project.
Regards.
langeveld024 said:
Thanks for your contribution to this community.
One question, why did u remove GPU control from emmc therm 0? This doesn't seem a very good idea to me, because from my testing it seems the GPU is generating the most heat.
I have made a thermal mod too, a while ago. Look it up, it's somewhere on XDA (too lazy to search, lol)
I'll keep an eye on this interesting project.
Regards.
Click to expand...
Click to collapse
Thanks for passing by , I did not remove GPU control give [emmc_therm__2.DEFAULT] a look.
I kept values as close to stock .. Actually decreased frequencies from 630 to 510 in temp range 48900 - 53200
I kept them as close to stock because main focus is the cpu for current version
I'll see what I can do further with GPU tweaking in next versions
Just re-uploaded FSC+ and the stock restoration zip (fixed a small issue with the zip)
____________________________________________
EDIT : New version is up please re-download I'm certain everyone will love it .. enjoy
Now using a very friendly and balanced GPU scaling based on nexus 6p nougat thermal engine
Great job there, stock z5 is terrible in performance terms really so mods are apreciated. Thanks!!!
Gpu is responsible for overheting in my opinion allso, it surges in terms of heat when under load and then all throttles down cause of it.
I still managed to get somewhat similar results with settings that worked for me till now (disabled qualcom core control) modified thermal.config (not my work).
Staring temperature prior to test:
52 cpu. 56 gpu. 41,7 batt
Geek Bench 411
first run
1442 single core
3407 multi core
Second run
1361 single core
3270 multicore
3D MARK (very demanding test)
Slingshot extreme test start from cold device scored 1883
Slingshot extreme test imediate second run scored 1770
End temperature after tests:
59 cpu. 64 gpu. 46,2 batt
I use .5.11 rooted stock
---------- Post added at 01:00 AM ---------- Previous post was at 12:56 AM ----------
Could be possible to contain gpu very low somehow so it does not produce excessive heat, so cpu can be maintained at higher frequ?
I use kernel aduitor but it seems i cannot control gpu temp. Like i would really like it to.
stipi69 said:
Great job there, stock z5 is terrible in performance terms really so mods are apreciated. Thanks!!!
Gpu is responsible for overheting in my opinion allso, it surges in terms of heat when under load and then all throttles down cause of it.
I still managed to get somewhat similar results with settings that worked for me till now (disabled qualcom core control) modified thermal.config (not my work).
Staring temperature prior to test:
52 cpu. 56 gpu. 41,7 batt
Geek Bench 411
first run
1442 single core
3407 multi core
Second run
1361 single core
3270 multicore
3D MARK (very demanding test)
Slingshot extreme test start from cold device scored 1883
Slingshot extreme test imediate second run scored 1770
End temperature after tests:
59 cpu. 64 gpu. 46,2 batt
I use .5.11 rooted stock
---------- Post added at 01:00 AM ---------- Previous post was at 12:56 AM ----------
Could be possible to contain gpu very low somehow so it does not produce excessive heat, so cpu can be maintained at higher frequ?
I use kernel aduitor but it seems i cannot control gpu temp. Like i would really like it to.
Click to expand...
Click to collapse
Please remember that this MOD IS NOT INTENDED FOR HARDCORE GAMING/CRUSHING PERFORMANCE LIMITS (even though can handle it) but rather to give more balance and satisfy everyone, here's is a quick 3D Mark test for both stock and FSC 1.1 (2 runs each)
Heat handling obviously improved since score dropped by less than- 100 point compared to -400 on default engine and all that time temperature always stayed below 42 unlike stock .. I'm not really into pushing the GPU since it's not that powerful and overheat fast but I'll see what I can do more for further optimization if needed .
Awesome mods, Seems very potential. I'm testing and will share my experience soon.
Thanks a bunch, mr. @korom42
Interesting... Would this mod work on non-stock rom (crDroid) ?
korom42 said:
Thanks for passing by , I did not remove GPU control give [emmc_therm__2.DEFAULT] a look.
I kept values as close to stock .. Actually decreased frequencies from 630 to 510 in temp range 48900 - 53200
I kept them as close to stock because main focus is the cpu for current version
I'll see what I can do further with GPU tweaking in next versions
Just re-uploaded FSC+ and the stock restoration zip (fixed a small issue with the zip)
____________________________________________
EDIT : New version is up please re-download I'm certain everyone will love it .. enjoy
Now using a very friendly and balanced GPU scaling based on nexus 6p nougat thermal engine
Click to expand...
Click to collapse
I uploaded original file and my modified file (based on carbon ROM, but almost the same as stock Sony) to show u the changes I made.
Take a look and feel free to use the GPU values as a comparison.
Im getting very good results with these values.
Regards.
What to difference between [MOD] FSC Thermal Engine 1.1.zip with [MOD] FSC+Thermal Engine 1.1.zip file?
I'm keen to try this on my Moto X force/ space heater.
What exactly does this change? As it's been designed for the Sony I just want to know it's not likely to hard brick the device (soft brick is fine, I can reflash if it all goes wrong).
Thanks for developing this anyway
sirdoha said:
Awesome mods, Seems very potential. I'm testing and will share my experience soon.
Thanks a bunch, mr. @korom42
Click to expand...
Click to collapse
Thanks for passing by .. glad to help, enjoy ..
nreuge said:
Interesting... Would this mod work on non-stock rom (crDroid) ?
Click to expand...
Click to collapse
Yes it is compatible with all roms as mentioned above
langeveld024 said:
I uploaded original file and my modified file (based on carbon ROM, but almost the same as stock Sony) to show u the changes I made.
Take a look and feel free to use the GPU values as a comparison.
Im getting very good results with these values.
Regards.
Click to expand...
Click to collapse
Nice tweaks there thanks for sharing !
UriahNazarian said:
What to difference between [MOD] FSC Thermal Engine 1.1.zip with [MOD] FSC+Thermal Engine 1.1.zip file?
Click to expand...
Click to collapse
Read the notes from 2nd post
c9701141 said:
I'm keen to try this on my Moto X force/ space heater.
What exactly does this change? As it's been designed for the Sony I just want to know it's not likely to hard brick the device (soft brick is fine, I can reflash if it all goes wrong).
Thanks for developing this anyway
Click to expand...
Click to collapse
You can give it a try, just backup thermal-engine.conf file found in \system\etc.
FSC+ is recommended, to make sure that it's working open kernel auditor and look for unused frequencies history at the bottom for big you have find 1824 and 1958 (at least) and 1555Mhz (at least) for small cores, if not restore your original thermal-engine.conf because it's not working and share it here if you interested I may tweak a version for your device when I'm free .
Do I need to turn on these settings on EX kernel manager to take advantage of your mod?
Sent from my sumire_dsds using XDA Labs
korom42 said:
You can give it a try, just backup thermal-engine.conf file found in \system\etc.
FSC+ is recommended, to make sure that it's working open kernel auditor and look for unused frequencies history at the bottom for big you have find 1824 and 1958 (at least) and 1555Mhz (at least) for small cores, if not restore your original thermal-engine.conf because it's not working and share it here if you interested I may tweak a version for your device when I'm free .
Click to expand...
Click to collapse
Thanks; I'll give it a go and feed back. It might be a few days until I get the opportunity.
Anybody tested this on Marshmallow?
Anyone tested camera after installing this mode? Looks buggy for me on stock 7.1.1 FW
Sent from my E6633 using Tapatalk
sry for asking that question, but how do you apply that mod? can you post a guide for that? ^^' i really want to try that mod, because of the heating problems
TrayK said:
sry for asking that question, but how do you apply that mod? can you post a guide for that? ^^' i really want to try that mod, because of the heating problems
Click to expand...
Click to collapse
Flash it via TWRP recovery
shehabskull said:
Anyone tested camera after installing this mode? Looks buggy for me on stock 7.1.1 FW
Sent from my E6633 using Tapatalk
Click to expand...
Click to collapse
tested on Xperia Z5 7.1.1, Camera feels laggy / stuttering, however great effort; heat is definitely controlled. hope we fix the camera issue also feels laggy if running multiple apps such as facebook, chrome, etc.
xperia z5 android 7.0.0
bleibt beim sony logo mit dem weißen bildschirm stehen.
leider kein erfolg, habe das handy mittlerweile 5 mal neu geflasht....
laut twrp erfolgreich, chache auch geleert, dann dead.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Master of Speed (Click)
The T800 travels from the FUTURE to bring YOU the POWER AND BATTERY of a Galaxy S10+ to your beloved S7, while fighting obsolescence...
Version III features:
° 8 hours of battery life sustained with Aosp
9 hours of SOT
° About twice or more the speed with no Lag por shutter
° Vídeo about how to apply UV properly and recommended ROM and kernel and many extras (Such as GPU Turbo and FPS screen uncap) All of that in only 8 hours! And for free!!
This revolutionary CREATION of mine will give you the SAME optimization as Apple do with it's phones (Tremendous battery life and smoothness) But with two or three times the amount of ram, better screens twice the cores, battery ,etc. So:
HERE IS THE AWESOME SPEED YOU CAN SPECT:
https://m.youtube.com/watch?v=6kolVhdtl3M&feature=youtu.be
AND HERE IS A BENCHMARK WHERE YOU CAN SEE TEMPERATURES OF 20 OR MORE DEGREES LESS THAN STOCK ROM, WHILE SAVING BATTERY
https://youtu.be/9DOjie9QFb4
"65% of charge in 30 minutes full charge achieved in less than a hour..." With Aosp only
Q: Why does the manufactures do this bad on stock on purpose?
Two things, MARKETING and PROGRAMMED OBSOLESCENCE which lead them to even put 10 core when a Apple device with two high power cores (Iphone 7 plus) eats it (Mediatek 10 core setup)
Q: What kind of results will i experiment?
With LATEST LINEAGE 16 + Morokernel + this AWESOME PROFILE and with a non-degraded battery you will experience the performance of a Samsung Galaxy S10 with the battery life (and also charging speed, if you have a QC 3.0 charger... of the Latest huawei/honor phones (8 hours SOT, 65% in 30 min) feeling the ui completely lag free, the apps opens right at the moment, and scrolling is like butter. Also runs very very well like a SD 855
So i upload you the profile, you will need the following:
Morokernel installed
Mtweaks latest
Download the latest LAG_TERMINATOR™
Open Mtweaks menu and select "profiles" then import the latest "LAG_TERMINATOR™" profile of mine.
APPLY THIS SETTINGS ON BOOT AND YOU ARE DONE. Vídeo settings:
https://youtu.be/CYIRS8nc0Lc
You have to apply this settings on Mtweaks to Morokernel and you are Done. You can also flash the attached zip's to uncap 60fps in all the system animations and GPU turbo for more gaming/phone normal use performance.
1Morokernel and mtweaks download (all in 1 flashable zip) (Works on aosp and TW roms) https://androidfilehost.com/?w=files&flid=295574
2DOWNLOAD NOW THIS AWESOMENESS:
https://www.mediafire.com/file/k964wlh4c4qz5ol/LAG_TERMINATOR™.json ***SEE THE ABOVE YOUTUBE VIDEO AND APPLY THE SAME SETTINGS AND LATTER YOU WILL ENJOY THIS.[/COLOR][/U]
Disclaimer: You don't have the right to post my content in any site without my explicit permission.
Note: If you want me to buy some toys/good sweets to my dear cat you can always donate some money to my paypal: http://paypal.me/DonateLAGTERMINATOR Thank you
------------
Hi! touching my phone and having common sense let me know that the Exynos GPU and the low power cores/high power cores have a little nonsense regarding to STOCK thermal and CPU/GPU freq/usage, so, i change between low power cores to high power cores at 50% it's minimum frequences and let the system to use ONLY the high power cores, heavy underclocked, since our phone have thermal copper plate to avoid high temperatures there should be no problem.
But the MORE INTERESTING part of it, it's that this Exynos allows to underclock a LOT among other things, except the GPU which doesn't go really well with underclocking so, when i do this mod, i was able to boost the overall system performance (daily use) like our S7 Exynos is like two or three generations after it regarding to performance! While turning on only hardcore CPU's and not the EIGHT OF THEM the phone not only runs wayyy better, but also runs VERY stable and cold, even better than stock.
Regarding battery life, the overall pack which you only have to import through "Morotweaks" you not only have a lot more benefits regarding low power consumption, but, when you use the powerfull cores ONLY at higher frequency, the Exynos is able to deep sleep more often than before... Regarding additional benefits into the battery life/heat area.
Any chance to have this profile running on thunderstorm kernel?
Thank you for sharing your work!
Thanks! Testing!
What about Reflux Kernel?
Therazorsedge said:
Hi! touching my phone and having common sense let me know that the Exynos GPU and the low power cores/high power cores have a little nonsense regarding to STOCK thermal and CPU/GPU freq/usage, so, i change between low power cores to high power cores at 50% it's minimum frequences and let the system to use ONLY the high power cores, heavy underclocked, since our phone have thermal copper plate to avoid high temperatures there should be no problem.
But the MORE INTERESTING part of it, it's that this Exynos allows to underclock a LOT among other things, except the GPU which doesn't go really well with underclocking so, when i do this mod, i was able to boost the overall system performance (daily use) like our S7 Exynos is like two or three generations after it regarding to performance! While turning on only hardcore CPU's and not the EIGHT OF THEM the phone not only runs wayyy better, but also runs VERY stable and cold, even better than stock.
Regarding battery life, the overall pack which you only have to import through "Morotweaks" you not only have a lot more benefits regarding low power consumption, but, when you use the powerfull cores ONLY at higher frequency, the Exynos is able to deep sleep more often than before... Regarding additional benefits into the battery life/heat area.
So i upload you the profile, you will need the following:
Morokernel installed
Mtweaks latest
Download the latest LAG_TERMINATOR™ zip
You have to go through the menu and select "profiles" then import the latest "LAG_TERMINATOR™" zip profile of mine.
You will experiment like you have a S10 instead of a S7 and you will be able to save a lot of battery and heat.
I recommend you the rom AOSIP but you can use every Aosp/Tw rom out there, even with other kernel compatible with Mtweaks/Thundertweaks but i recomend only this rom. Enjoy it.
DOWNLOAD NOW THIS AWESOMENESS:
https://www.mediafire.com/file/k964wlh4c4qz5ol/LAG_TERMINATOR™.json
Disclaimer: You don't have the right to post my content in any site without my explicit permission.
Note: If you want me to buy some toys/good sweets to my dear cat you can always donate some money to my paypal: [email protected] Thank you, Miau!!!
Click to expand...
Click to collapse
my phone is flying now, thank u so much
not compatible with stock kernel, am i right ?
I see minimum CPU clock of big cores is locked to 1664 MHz. So no low clocks = high battery drain....
It's compatible with lineage 16 and MoRoKernel-AllInOne-CSC4-v7.0.1?
danyel980 said:
It's compatible with lineage 16 and MoRoKernel-AllInOne-CSC4-v7.0.1?
Click to expand...
Click to collapse
yes
Ubimo said:
I see minimum CPU clock of big cores is locked to 1664 MHz. So no low clocks = high battery drain....
Click to expand...
Click to collapse
The magic of this is explained on the first post video. My S7 now feels like a ****ing S10 with better battery
Also try the latest Lineage OS!!! My friend.
You will sabe a lot of heat and battery
Ubimo said:
I see minimum CPU clock of big cores is locked to 1664 MHz. So no low clocks = high battery drain....
Click to expand...
Click to collapse
danyel980 said:
It's compatible with lineage 16 and MoRoKernel-AllInOne-CSC4-v7.0.1?
Click to expand...
Click to collapse
You can run it in EVERY KERNEL AND EVERY ROM that supports UNDERVOLTING, and you'll THEN EXPERIMENT IF YOU DO IT'S TREMENDOUS INCREASES ON BATTERY LIFE AND POWER like your phone is a galaxy S10 (but with better battery)...
I.m.Tuga said:
Any chance to have this profile running on thunderstorm kernel?
Thank you for sharing your work!
Click to expand...
Click to collapse
You are wellcome, you can donate through paypal so i buy new toys to my cat
You can allways in any moment tell us here your FANTASTIC RESULTS with LAG_TERMINATOR™ Profile of mine
Hesperus01 said:
What about Reflux Kernel?
Click to expand...
Click to collapse
It should work, you can try and tell us here the difference, if it uses UV you'll be fine. Also your battery speed charge level increases, tell us
Works great, feels very smooth but it feels very hot too! I´ve undervolt -75mw in CPU , -50mw in GPU and -56,25 in MIF-INT-DISP-CAM, what more can i do?
kienzi said:
my phone is flying now, thank u so much
Click to expand...
Click to collapse
Well i'm glad to see i'm helping others with this revolutionary arrangement, keep in tune for more updates!
Ubimo said:
I see minimum CPU clock of big cores is locked to 1664 MHz. So no low clocks = high battery drain....
Click to expand...
Click to collapse
You need to read the full post and try it for yourself to see this incredible and AWESOME RESULTS!!!
JuanMat97 said:
Works great, feels very smooth but it feels very hot too! I´ve undervolt -75mw in CPU , -50mw in GPU and -56,25 in MIF-INT-DISP-CAM, what more can i do?
Click to expand...
Click to collapse
You only have to view the first post youtube config video, and make you s7 literally fly colder than before
There seems to be a problem with Mtweaks, so you have to copy the values by hand, pretty easy actually
Also i recommend you try latest lineage 16 for the BEST RESULTS.
Therazorsedge said:
You only have to view the first post youtube config video, and make you s7 literally fly colder than before
There seems to be a problem with Mtweaks, so you have to copy the values by hand, pretty easy actually
Also i recommend you try latest lineage 16 for the BEST RESULTS.
Click to expand...
Click to collapse
for best results I think I'll wait next release cuz with bug fixes on camera hal
I installed profile, and manually edit voltages like in the video but my phone heats, on charger even more
Hello! I was excited when I found your creation, but on my hyper rom v3 with Thunderstorm kernel, the most of the values don't seem to be the same as yours (like the video you've posted).
I can relate that my S7 doesn't heat so hard while charging, but it charges slower (which is not a bad thing). Also Spectrum profiles have reduced to 2 profiles, sometimes 3 (if I toggle them fast - balanced, "battery" and Gaming), instead of 4. I tried to record my screen to show you, but I got lots of freezes lasting 5 to 10 seconds . Do I need to move to AOSP in order to get the right tweaks, or could you please rearange values for Thunderstorm kernel?