{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introducing you the best way to install new Android 9 GSI roms
We remind you that we are not responsible for damages caused by a bad installation, but read all the contents
For this to be possible, I advise you to have the device with Bootloader unlocked and already be using Treble recovery
WHATS IS KVT ?
KVT is a base for you to install any GSI (not sGSI) aonly 64-bit based on Lineage or Aosp on your Albus, keeping the main features independent of the chosen GSI image such as:
Double-twist to open the camera;
Chop-chop for flashlight;
Wave to silence;
Pick up to stop ringing.
In addition of course turbo charge, sensors, camera, fully functional radios, Fix Green Tint, Auto Focus, Front Camera, Volte, Check SafetyNet pass, Gcam by San1ty,
IMPORTANT: Volte fix, function properly enabled, but to work you need to install ims.apk
HOW TO INSTALL ROM GSI
*Install Treeble recovery
* Wipe System/Data/Dalvik Cache/Cache
* Install KVT 1.4 - Developer: davidsonsjesus
* Suggestion GSI Developer: NFound
ROMs in the ARM64 version aonly
* Once the restart is complete, go back to the recovery and install GAAPS nano android 9 arm64
*After that if you like you can install Magisk and ready
QUESTIONS AND ANSWERS
Q: Is my device still factory-manufactured, what should I do to use a GSI?
A: You must first unlock the bootloader of the device, then install TWRP Treble.
Q: Hey and I already use GSI, but I want to update?
A: no problem, just install kvt, make the following wipes described above and upgrade your device
Q: I already know kvt, how to update?
A: Just download the KVT file. restart the device in recovery mode, Dalvik Cache / Cache, in install choose downloaded file and install, after restart the device and ready, updated
Q: Will kvt always be up to date?
A: Yes, updates are required so that the device always works normally
Sources:
Kernel
Tree
Credits:
phhusson
brunorochaa00
rahulsnair
davidsonsjesus
LineageOS
Firehound
LEARN MORE ABOUT KVT
t.me/albuskvt
@albuskvt
So is a updatet version?
I try Havic OS 2.3 but i dont have a steable kernel.
Hope this will work.
I have only one question.
If i am on for excample on Havoc 2.2 and i wont to update to Havoc 2.3 how to do it whitout lose my data or wipe everything and start again?
Thanx for the reply
And Is the kernel here updated?
Sectorian said:
So is a updatet version?
I try Havic OS 2.3 but i dont have a steable kernel.
Hope this will work.
I have only one question.
If i am on for excample on Havoc 2.2 and i wont to update to Havoc 2.3 how to do it whitout lose my data or wipe everything and start again?
Thanx for the reply
And Is the kernel here updated?
Click to expand...
Click to collapse
kvt have stable kernel, install kvt 1.1 and img ,
to upgrade, wipe system and dalvik cache, do not select data, and your data will be preserved, after giving wipe install the image as system image and reboot, if need install magisk and gapps after reboot
Can the moto mod manager not be included in the base?
Thanks, moto actions work buy now i can take radiofm to work?
Tonystarki said:
kvt have stable kernel, install kvt 1.1 and img ,
to upgrade, wipe system and dalvik cache, do not select data, and your data will be preserved, after giving wipe install the image as system image and reboot, if need install magisk and gapps after reboot
Click to expand...
Click to collapse
But after reboot i have google play crash.
I really like project treble from google. But i cant find a easy way to update the roms.
Anyway thanks for the reply.
well, I already fail on getting to that treble recovery. GDrive says I have to request the permissions, but clicking on request just comes back with "message couldn't be send". Or is this the one meant: https://androidfilehost.com/?fid=1322778262904007189 ?
In that case you might want to update the link in your post
But do I understand right? When coming from stock, i have to
install treble ready TWRP
install GSI enabled 8.1 ROM
wipe system, data, cache and dalvik
install KVT
flash a Pie GSI ROM (Oreo kernel afterwards not neccessary because included in KVT?)
reboot
flash opengapps (why nano? won't the rest just work too?)
reboot to ready system
We know what this is missing...
Does this carry over features or are those features contained within it?
Not working bro I have tried havoc is and pixel experience.
Instrucctions
Artim_96 said:
well, I already fail on getting to that treble recovery. GDrive says I have to request the permissions, but clicking on request just comes back with "message couldn't be send". Or is this the one meant: https://androidfilehost.com/?fid=1322778262904007189 ?
In that case you might want to update the link in your post
But do I understand right? When coming from stock, i have to
install treble ready TWRP
install GSI enabled 8.1 ROM
wipe system, data, cache and dalvik
install KVT
flash a Pie GSI ROM (Oreo kernel afterwards not neccessary because included in KVT?)
reboot
flash opengapps (why nano? won't the rest just work too?)
reboot to ready system
Click to expand...
Click to collapse
The instructions are clear you do not need to install the room 8.1 since the function of the KVT is precisely to activate the functions that they specify from the beginning so that the Pie room works correctly
1.- install treble ready TWRP
2.- wipe system, data, cache and dalvik
3.- install KVT
4.- flash a Pie GSI ROM
5.- reboot
6.- flash opengapps (any gapps)
7.- reboot to ready system
Ok, interesting. I'm surprised because it's so small and flashing a full treble ready 8.1 ROM would be about 10x the size.
A question for the developers of this ROM. This ROM will continue to be developed, will there be update with the security Pach in the coming months? Thank you
C4mine said:
Not working bro I have tried havoc is and pixel experience.
Click to expand...
Click to collapse
Worked perfectly fine, using AEX currently and used Crdroid for a month
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
ramsesdi said:
A question for the developers of this ROM. This ROM will continue to be developed, will there be update with the security Pach in the coming months? Thank you
Click to expand...
Click to collapse
You can update the GSI, if it gets security updated, you just flash the new GSI as system
Bro video calling is not working how to fix it ?
HackerZer0 said:
The instructions are clear you do not need to install the room 8.1 since the function of the KVT is precisely to activate the functions that they specify from the beginning so that the Pie room works correctly
1.- install treble ready TWRP
2.- wipe system, data, cache and dalvik
3.- install KVT
4.- flash a Pie GSI ROM
5.- reboot
6.- flash opengapps (any gapps)
7.- reboot to ready system
Click to expand...
Click to collapse
not working with RR, though bootlegger works
Artim_96 said:
not working with RR, though bootlegger works
Click to expand...
Click to collapse
Man can you tell me how to update a gsi ROM from one version excamle 2.2 to 2.3?
Sectorian said:
Man can you tell me how to update a gsi ROM from one version excamle 2.2 to 2.3?
Click to expand...
Click to collapse
No. Didn't even stay on bootleggers, because it's horrible. Went back to stock, will try again in a few days. But in theory it's the same like installing it completely new, with the difference that wiping /data shouldn't be necessary and you might not need to install kvt again unless it's a newer version
works perfectly. i have no words to described how my his patch makes my life easy. thank you very much
it's working, but I think the used kernel could use quite some performance improvement. On bootup, the keypad for SIM pin and display unlocking are reacting extremely slowly and especially in the minutes after a reboot it can happen that half of the UI is pretty much frozen. You can open notifications and use the navbar, but it can't open settings or the recent apps view.
I'm not sure if it's a ROM problem but since they are perfromance issues they should be kernel related. (running Pixel Experience, since the ROMs seem all to be quite some halfbaked ****)
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good morning and good afternoon everyone, as a newly-signed Android Developer, I’m proudly to introduce my first ROM project ---- GoogleExtended.
What is GoogleExtended?
Basically, GoogleExtended is a Custom ROM currently based on Android P. The idea of GoogleExtended is to deliver the stock Google experience on variety of devices. The first device that supports GoogleExtended is Xiaomi Mi Mix 2S. GoogleExtended is a ROM that you can use it day-to-day, experiencing Pixel-Liked purely stock Android, with Google features added in. Also, most of the GoogleExtended ROMs are rooted with Magisk, and with Google Product Sans installed.
DISCLAIMER: I’M NOT RESPONSIBLE FOR BRICKED DEVICES, BROKEN DEVICES OR ANY KIND OF DAMAGE ON YOUR DEVICE. FLASH AT YOUR OWN RISK!
NOTICE: THERE IS CURRENTLY UNSUPPORTED BUGS AND FC (PROCESS SYSTEM NOT RESPONDING) ON 6GB+64GB MODEL, TESTED FUNCTIONAL ON 6GB+128GB AND 8GB+256GB MODEL
What’s Working?
• Camera (Including both front and rear cameras, also camera flash)
• HDR+ & HDR+ Enhanced
• Video Recording in 4K
• Panorama Photos
• Photo Sphere
• Lens Blur (Working but Over Exposed)
• Portrait Photos (Working but Laggy, actually takes good Portraits)
• Upside-Down Selfies (Because the Front Camera on Mi Mix 2S is at the bottom)
• CDMA Calling & 4G LTE Data (China Telecom Supported)
• Dual SiM Calling & 4G LTE Data (Re-insert SiM Cards if no signal)
• Root with Magisk
• All other essentials for a Smartphone.
What’s Not Working?
• Motion Photos (Sometimes works, most time stay useless)
• Slow Motion Videos
• “Search Settings” in Settings app
• Flashlight don’t work when battery is below 20%
• A reminder of "This is a preview of Android" shown upon boot (Due to the boot image and kernel is tweaked from Android P DP2)
• Actual Security Patch version not displaying in Settings (Actual Security Patch is from July)
• You tell me
If you found anything that is not working or have bugs, and that is not listed above, feel free to comment or reply under my post. Always remember, any feedback is good feedback.
How to Flash?
This ROM is not the same to most other custom ROMs’ flashing method, the ROM’s zip file is not a flashable zip, it’s a TWRP Restore Package. Please Google it if you don’t know how to Restore a TWRP Backup.
Your phone need to be unlocked, and you need a computer (Windows Recommended).
1. Flash the Base ROM via MiFlash.
2. Wait for MiFlash finished flashing your device and boot up to system.
3. Reboot to Fastboot mode and flash the TWRP Recovery.
4. Reboot to TWRP Recovery.
5. Do four wipes (Dalvik/ART Cache, Cache, System and Data)
6. Restore the ROM image.
7. Don’t reboot, continue flash the Camera Patch.
8. Reboot Your Phone.
9. Enjoy!
If you cannot find a Camera app installed after your device boot into the system, just simply install the Camera apk from the Camera Patch Zip folder.
Downloads:
AlphaBuild 1: https://drive.google.com/file/d/1zBA0Xf83IuP8govmFJlI1PbYnO7j2ZiD/view?usp=sharing
Base ROM: https://drive.google.com/file/d/1X6kyGmqSVL7rQhh2_DAJtnlsXVITRdeg/view?usp=sharing
Camera Patch: https://drive.google.com/file/d/1zPHeUx6v2uv9UC0eie8IZJLaMYGfMryr/view?usp=sharing
TWRP Recovery (From notsyncing): https://drive.google.com/file/d/1Ge3WuWjjKoHWPIe9jvCtK2kGihHDE8Pm/view?usp=sharing
Screenshots
https://image.ibb.co/gG5A0K/Screenshot_20180904_143519.png
https://image.ibb.co/e7qXEe/Screenshot_20180904_143540.png
It's actually looking dammn good, I will probably leave MIUI Beta Team for this !
Hi man,
What's this based on? A treble rom setup by you or you compiled it from some sources?
ROM base can not be installed.
Edit: Base ROM: device=polaris build_number=8.5.3 userdata_version=20180503.0000.00
edit: patch level may ?
WHat about camera quality?
Didn't work for me. Followed install instructions but during setup system kept crashing and if you complete setup it just freezes to black screen
aeppacher said:
Didn't work for me. Followed install instructions but during setup system kept crashing and if you complete setup it just freezes to black screen
Click to expand...
Click to collapse
Something similar to me, App info error message continuosly displayed, can't connect to wifi and end setup, screen freeze, tried factory reset and wipe dalwik and cache but not solve.
VampireHeart said:
Something similar to me, App info error message continuosly displayed, can't connect to wifi and end setup, screen freeze, tried factory reset and wipe dalwik and cache but not solve.
Click to expand...
Click to collapse
Seeing as this is a twrp restore over the dev beta from may, we can't have high expectations of this working
aeppacher said:
Didn't work for me. Followed install instructions but during setup system kept crashing and if you complete setup it just freezes to black screen
Click to expand...
Click to collapse
Did you flash my base ROM before restoring the image? I tried on my device and everything works just fine. But it's still a alpha build, so I'll keep fixing the issues.
Ocean'Depth said:
Did you flash my base ROM before restoring the image? I tried on my device and everything works just fine. But it's still a alpha build, so I'll keep fixing the issues.
Click to expand...
Click to collapse
I flashed fastboot rom that you linked with Mi Flash Tool, then restored your backup and then flashed camera patch.
Now i get Process system isn't responding (close app - wait).
Format data can help?
aeppacher said:
Seeing as this is a twrp restore over the dev beta from may, we can't have high expectations of this working
Click to expand...
Click to collapse
I'm using this ROM as my daily driver and I don't have any problem. I will figure this thing out later as soon as I got home.
Ocean'Depth said:
I'm using this ROM as my daily driver and I don't have any problem. I will figure this thing out later as soon as I got home.
Click to expand...
Click to collapse
i can try formatting data and not restoring my backup?
VampireHeart said:
I flashed fastboot rom that you linked with Mi Flash Tool, then restored your backup and then flashed camera patch.
Now i get Process system isn't responding (close app - wait).
Format data can help?
Click to expand...
Click to collapse
I the same error.
what gcam to use?
nvm. after flashing camera patch, there was no camera, installed manually camera apk from the zip
Wooby said:
what gcam to use?
nvm. after flashing camera patch, there was no camera, installed manually camera apk from the zip
Click to expand...
Click to collapse
work for you without crash during setup or later? which base you flashed?
VampireHeart said:
I flashed fastboot rom that you linked with Mi Flash Tool, then restored your backup and then flashed camera patch.
Now i get Process system isn't responding (close app - wait).
Format data can help?
Click to expand...
Click to collapse
Yes... I forgot to mention, you need to do a full wipe though, after flashing TWRP. Just do all four wipes, dalvik/art cache, cache, system and data, then restore my package and try again.
Ocean'Depth said:
Yes... I forgot to mention, you need to do a full wipe though, after flashing TWRP. Just do all four wipes, dalvik/art cache, cache, system and data, then restore my package and try again.
Click to expand...
Click to collapse
ok thank a lot, i'm trying another way before right now, your base is from chinese fastboot oreo rom right?
malimukk said:
Hi man,
What's this based on? A treble rom setup by you or you compiled it from some sources?
Click to expand...
Click to collapse
This ROM is a combination of AOSP source, baseband from MIUI 10, kernel and boot image from the official Android P for MIX 2S, and some pixel features. The base rom is only for the kernel and the images/vendor.
morpheus620 said:
ROM base can not be installed.
Edit: Base ROM: device=polaris build_number=8.5.3 userdata_version=20180503.0000.00
edit: patch level may ?
Click to expand...
Click to collapse
The base rom that I uploaded is just the official Android P beta with some of mine tweaks. I didn't edit the build.prop because the system partition will be overwritten by my backups. The correct build.prop is shown after restoring my system.
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Feature list https://github.com/crdroidandroid/crdroid_features/blob/9.0/README.mkdn
Rom folder + screenshot -> https://drive.google.com/open?id=1GYVVJ2GVC-MCN-dL84x8Z2uPkhcUd3cY
Instructions :
Backup all before flash!!
Check if you have unlocked bootloader and updated firmware if not download and flash it with twrp and reboot recovery before start flash
https://drive.google.com/open?id=1FfYb6hWviggupkQRBNfE-ah85MSl-1aB
First of all you need to flash or boot @Giovix92 TWRP (I recommend)
https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-3-1-0-tissot-manager-t3976117
or official twrp
Boot into twrp and factory reset
Flash the rom zip
Flash twrp installer (skip if you use twrp survive option)
Reboot recovery
Flash opengapps nano or pico
If you want to root, flash Magisk
Reboot to System.
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES :
You tell me
Some QS theme maybe have color problem but default QS works. Source bug,I can't fix for now
A very special thanks to @Giovix92 and my telegram friends https://t.me/XiaomiMiA1Italia and who tested this rom.
Source
https://github.com/crdroidandroid
https://github.com/LineageOS/android_device_xiaomi_msm8953-common/tree/lineage-16.0
https://github.com/LineageOS/android_device_xiaomi_tissot
https://github.com/LineageOS/android_kernel_xiaomi_msm8953
https://github.com/RevengeOS-Devices/android_vendor_xiaomi_tissot
https://github.com/LineageOS/android_device_xiaomi_msm8953-common/tree/lineage-16.0
https://github.com/LineageOS/android_device_xiaomi_tissot
https://github.com/LineageOS/android_kernel_xiaomi_msm8953
https://github.com/RevengeOS-Devices/android_vendor_xiaomi_tissot
XDA:DevDB Information
[Official] crDroid 9.0 TISSOT, ROM for the Xiaomi Mi A1
Contributors
samuele94, Giovix92, https://t.me/XiaomiMiA1Italia users for support!
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Android 9 firwmare (check my profile)
Based On: LOS
Version Information
Status: Stable
Created 2019-10-23
Last Updated 2019-11-28
Goodjob!
Hope 6.0 for 10
Nickinfinity said:
Goodjob!
Click to expand...
Click to collapse
Thanks,I'll keep it updated!
manchirua said:
Hope 6.0 for 10
Click to expand...
Click to collapse
Yes but for now I wait stable public trees for us,for now I keep android 9 updated and I try to build 6.0 soon!
until the situation of android 10 remains "beta" I will stay on android 9 for stability.
android 10 is a great working in progress, right now I don't feel the need to go to 10 but I'll work on it willingly! The development of tissot needs people who keep it alive!
Awesome, unless q stabalises pie will do dont rush for q, btw why not take official maintainership, its abandoned afaik.
Good, thanks bro
Sohil876 said:
Awesome, unless q stabalises pie will do dont rush for q, btw why not take official maintainership, its abandoned afaik.
Click to expand...
Click to collapse
You're right but I'm learning. I only claim to continue building this rom for my only smartphone because I want to keep an updated rom 9.0. For now the tag isn't essential for me but I'll see what I can do!
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
samuele94 said:
Thanks,I'll keep it updated!
Yes but for now I wait stable public trees for us,for now I keep android 9 updated and I try to build 6.0 soon!
until the situation of android 10 remains "beta" I will stay on android 9 for stability.
android 10 is a great working in progress, right now I don't feel the need to go to 10 but I'll work on it willingly! The development of tissot needs people who keep it alive!
Click to expand...
Click to collapse
Yeah, thank you
BTW, i can use MindTheGapps?
manchirua said:
Yeah, thank you
BTW, i can use MindTheGapps?
Click to expand...
Click to collapse
Not tested but why not? you can try,rom works fine with opengapps but i think you can change type of gapps. I like opengapps nano (or pico) but MindTheGapps for arm64 and android 9 should work properly
Mendibil said:
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
Click to expand...
Click to collapse
Last i tried all gapps build before 6 oct worked fine so download older than 6 oct release, its not los problem.
Great rom, Working flawlessly.
Btw any solution for green slow-motion recording?
Mendibil said:
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
Click to expand...
Click to collapse
Yes you can use latest opengapps nano or pico 9.0 arm64 but if you have problem you can download older version here https://sourceforge.net/projects/opengapps/files/arm64/ gapps are nightly, I don't know if it have bugs/problems
Stealtherthreat said:
Great rom, Working flawlessly.
Btw any solution for green slow-motion recording?
Click to expand...
Click to collapse
Try a good GCam and see if it fix, I don't use this feature sorry
Added on my Gdrive folder changelog about this build. I'll update file after new build,when new build? when I can see difference to previous build!
Hi to all! Rom is now official,check here!
https://crdroid.net/tissot Add Telegram group https://t.me/crDroidA1
Tested today opengapps nano 25/10/19 works perfect and encryption works too
Messed up
Not sure what happened but everything is messed up after trying to flash the new ROM.
not able to run twrp properly,
Not able to install gaps
I keep getting a message that some partition is not there and...
Looking for a new handset...
teoasv said:
Not sure what happened but everything is messed up after trying to flash the new ROM.
not able to run twrp properly,
Not able to install gaps
I keep getting a message that some partition is not there and...
Looking for a new handset...
Click to expand...
Click to collapse
Steps? Twrp used? Here works fine,tested by me and other people. Without info I can't help you
samuele94 said:
Steps? Twrp used? Here works fine,tested by me and other people. Without info I can't help you
Click to expand...
Click to collapse
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
teoasv said:
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
Click to expand...
Click to collapse
You shouldnt flash img from fastboot only boot that, fastboot boot twrp then flash installer.zip file of twrp from the hotbooted twrp, then do reboot to recovery.
Sohil876 said:
You shouldnt flash img from fastboot only boot that, fastboot boot twrp then flash installer.zip file of twrp from the hotbooted twrp, then do reboot to recovery.
Click to expand...
Click to collapse
Sorry I don't get what you are saying. I did this:
Open the folder where your TWRP Recovery .img file is saved.
Then open a CMD window inside that folder. To do that, Shift + Right click on any empty white space inside the folder and then select Open command window here.
Connect your Android device to the PC. Type the following into the command window to boot your device into bootloader/fastboot mode:
adb reboot bootloader
└ If your asks for permission to “Allow USB debugging”, tap OK.
Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery twrp-2.8.x.x-xxx.img
└ Here modify twrp.img with the name of your TWRP recovery .img file.
Once TWRP is successfully flashed on your device, type this final command to reboot your device.
fastboot reboot
teoasv said:
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
Click to expand...
Click to collapse
Previous version? It's the first version!
Your firmware is up to date? you need to update it and hotboot again twrp,flash installer reboot recovery and follow op step.
No you need to fastboot boot latesttwrp.img boot not flash,for flash you need twrp installer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixel Experience and Plus for Realme 1
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation).
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device.
What's working:
1. Boots
2. RIL(Calls,SMS,Data)
3. Wi-Fi
4. Bluetooth
5. Camera
6. Audio
7. Sensors
8. Flash
9. Brightness
10. GPS
11. Gcam (Dont download from Play Store, it wont work)
12. Hotspot
13. USB Tethering
14. DT2W
15. Face Unlock
Known issues:
1. Selinux is permissive.
2. Video codec issues in all Chromium based browser. Check 4th post for fix.
3. VoLTE.
Before Flashing:
1. Take a backup of your data.
2. Clean flash is recommended as of now.
3. Flash the shared TWRP only.
4. Always download latest build.
5. TWRP downloads (alternative one) and flashing instructions can be found in this git link.
6. Always read 2nd and 3rd posts.
Installation Instructions:
1. Clean Flash is recommended, Install TWRP and enter into it.
2. Wipe Dalvik, Cache, System, Data, Internal Storage.
3. Reboot to TWRP.
4. Flash Pixel Experience or Pixel Experience Plus ROM (Gapps are included).
5. Flash Magisk (v20.3 is recommended and is optional).
6. Wipe Cache and Dalvik after flashing.
7. Reboot to system and first boot will take time.
8. Done, you are in Pixel Experience or Pixel Experience Plus ROM and njoy.
Note:
1. In our testing only few versions of Magisk are working. So use the shared one only.
2. Working magisk versions:
Original - 20.1 and 20.3
Phh based - 20.3
3. Dont update magisk (you can update app though).
4. Use the shared TWRP only and dont use others (testings are based on the shared TWRP).
5. ROM is now stable for daily use, enjoy.
Downloads:
Pixel Experience (discontinued)
Pixel Experience Plus
Pixel Experience: 10
Pixel Experience Plus: 10+
Security Patch Level: August 2020
Build Author: Naveen56
ROM Source Code: https://github.com/PixelExperience
Device Tree: https://github.com/CPH1859/Pixel_Experience_and_Plus
Kernel Source Code: https://github.com/CPH1859/android_kernel_oppo_mt6771
Information
[STABLE][ROM][10.0]Pixel Experience 10 and 10+, ROMs for Realme 1 [CPH1859/61]
Contributors:
1. Invincible-Venom
2. Naveen56
3. Phhusson
4. SamarV-121
5. vishalk17
Credits:
1. mmoreyrav
2. GSI Community
Testers:
1. venombiceps
2. Vijay996
3. MpS005
4. eldraco19
5. ahmadfahim0123
6. Mohit619
Thanks to:
1. Realme and Oppo,
2. Google and Android,
3. Lineage OS, Pixel Experience and other open source ROM developers,
4. XDA Developers.
ROM OS Version: Android 10
ROM Kernel: Linux 4.4.159
ROM Firmware Required: C.49 (Latest Version)
Based On: AOSP
Version Information:
Status: Stable
Release Date: 12-07-2020
Created: 12-07-2020
Last Updated: 16-08-2020
CHANGELOG:
Code:
16/08/2020
1. August Patch
2. Added OnePlus Screen Recorder
3. Added Face Unlock
4. Kernel up-streamed to 4.4.159
5. All changes of PE+ for the month of August.
Code:
13/07/2020
1. Fixed offline charging animation
2. July Patch.
Code:
06/06/2020
1. Initial Release.
Get into this link for some workarounds to the issues you are facing in all Realme 1 ROMs.
Pixel Experience is discontinued and PE+ will be continued. If you are still interested then you can use tress to update it monthly.
Thanks @Naveen56 for the support! Also add some screenshots
Any information regarding JIO VOLTE
I know that Volte might not be possible ever in realme 1. But JIOCALL app is also not working in any of the custom rom. I really want to use this rom , but the only thing stopping me is that my sms/calls will not work. Can you please share any info if you have to make jiocall app work..
---------- Post added at 08:15 AM ---------- Previous post was at 08:10 AM ----------
Somehow i got jiocall app working, and the sim was also registered and status was connected. But i am still not getting any calls/sms. And if i try to call, it says "use your default dialer, your device is already volte"."JioCall App should only be used to make rich calls". This means i can only call to the person who is using jiocall app.
Awesome work!
issues , fedbaack and question
sometimes some apps crash like whatsapp And is there OTA updates? and if there isnt
Zainullahk said:
sometimes some apps crash like whatsapp And is there OTA updates? and if there isnt
Click to expand...
Click to collapse
Are you using 15th August build?
MpS005 said:
Are you using 15th August build?
Click to expand...
Click to collapse
yes is there ota?
Zainullahk said:
yes is there ota?
Click to expand...
Click to collapse
15th build is the latest build for Pixel Experience. Did you try clean flashing rom again?
And OTA doesn't work in any rom as of now. Even if you get OTA in any rom (Bliss), then do not install it.
Can I update Google play patch?
zainullahk1 said:
Can I update Google play patch?
Click to expand...
Click to collapse
Yes, you can do Google Play System (Security) updates
Urgent!!!!
i clicked reset in pixel expierince and now i cant boot into my os it keeps booting into twrp i tried re flashing didnt work i tried this https://forum.xda-developers.com/lg-g5/how-to/android-booting-twrp-recovery-t3572200 it says conv disabled how do i enable conv!!
Zainullahk said:
i clicked reset in pixel expierince and now i cant boot into my os it keeps booting into twrp i tried re flashing didnt work i tried this https://forum.xda-developers.com/lg-g5/how-to/android-booting-twrp-recovery-t3572200 it says conv disabled how do i enable conv!!
Click to expand...
Click to collapse
Get into twrp format data and wipe system, data, cache, dalvik, internal. Flash stock rom. Then you can flash anything (i mean ROM).
Never use reset from settings. It causes infinite loops.
Just wanted to say how awesome this is.
Hey, I used the rom and it worked as intended and it was an awesome experience. Gotta say, you guys know your stuff. I am in love with the pixel experience plus as the bundle makes it very easy to flash and it works almost flawlessly(except for, of course VoLTE, @MpS005 user - https://forum.xda-developers.com/member.php?u=9393824 told me that the source for cellular network is closed in mediatek chips so it is really hard to activate VoLTE) but I love the ROM anyways and I must commend your hard work. Just want to say keep it up and I'll be waiting for when you guys crack the VoLTE problem. I am so in love with pixel experience that my next phone sure is going to be a pixel.
Naveen56 said:
Naveen56 said:
Get into twrp format data and wipe system, data, cache, dalvik, internal. Flash stock rom. Then you can flash anything (i mean ROM).
Never use reset from settings. It causes infinite loops.
Click to expand...
Click to collapse
sir me too got stuck in such kind of situation i just had flashed pixul ui 3.5 for real me 1 and i clicked on advance reboot and their selected boot into recovery and now when ever i try to turn on my device it keep on booting into recovery mode even if in twrp i select boot into system but it again loop into recovery please help me i love this rom for real me 1 but it just broke my hear....please share me the links
Click to expand...
Click to collapse
i just had flashed pixul ui 3.5 for real me 1 and i clicked on advance reboot and their selected boot into recovery and now when ever i try to turn on my device it keep on booting into recovery mode even if in twrp i select boot into system but it again loop into recovery please help me i love this rom for real me 1 but it just broke my heart...please share me the links
Naveen56 said:
Get into twrp format data and wipe system, data, cache, dalvik, internal. Flash stock rom. Then you can flash anything (i mean ROM).
Never use reset from settings. It causes infinite loops.
Click to expand...
Click to collapse
as a devloper you have to add this as a marked,this error as a priority for those who is flashing this rom now m getting twrp looping i even tried toflash other custom rom using recovery but that doesnt help me out seems now i have to flash ozip file please help
vishalv.vv469 said:
i just had flashed pixul ui 3.5 for real me 1 and i clicked on advance reboot and their selected boot into recovery and now when ever i try to turn on my device it keep on booting into recovery mode even if in twrp i select boot into system but it again loop into recovery please help me i love this rom for real me 1 but it just broke my heart...please share me the links
Click to expand...
Click to collapse
I feel sorry for that. You need to flash stock ROM through twrp. Then boot into stock ROM. And from here you can proceed to flash custom ROM. Anyway I don't recommend flashing this ROM now as it has no VoLTE and is outdated. Try other ROM that have VoLTE.
vishalv.vv469 said:
as a devloper you have to add this as a marked,this error as a priority for those who is flashing this rom now m getting twrp looping i even tried toflash other custom rom using recovery but that doesnt help me out seems now i have to flash ozip file please help
Click to expand...
Click to collapse
Yes, you have to flash Ozip and please check the twrp you flashed has this feature of flashing ozip and also leave some 3GB storage in the memory card as ozip has to be decrypted to zip.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
Click Here (To be Updated)
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
Update installation:
Boot to recovery
Flash crDroid zip
Flash gapps and reboot to system
Enjoy
Sources:
ROM: https://github.com/crdroidandroid
Kernel: Click Here
Download:
ROM https://crdroid.net/lavender
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/11.0/changelog_lavender.txt
Known issues:
LiveDisplay and Night Light [ Will be Fixed on next update]
Maybe more?
Visit official website @ crDroid.net
crDroid Community Telegram
XDA:DevDB Information
[ROM][lavender][Android 11] crDroid v7.0, ROM for the Xiaomi Redmi Note 7
Contributors
letsmakecakes
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware
Version Information
Status: Beta
Created 2020-11-19
Last Updated 2020-11-19
Reserved
This is initial Beta Build . There maybe bugs more than mentioned. Please report as you find one .
Reserved
Will there be more Android 10 update?
Is SELINUX Permissive or Enforced?? Do banking apps work without root or not? For example Revolut - can it be installed without Magisk from Google play?
i can't download it
download fails before the end of it
About bugs, I can add a lagging curtain(or statusbar, sorry i dont know how its called on English ). If i turn off blur it become better, but some lags steal here
silmium said:
i can't download it
download fails before the end of it
Click to expand...
Click to collapse
Its a server problem . I tried also with a file downloader, but stoped after 50mb
LE: now download is working perfect
letsmakecakes said:
This is initial Beta Build . There maybe bugs more than mentioned. Please report as you find one .
Click to expand...
Click to collapse
Some animations like scrolling the status bar and opening some applications look a bit laggy.
Besides I'm having several problems with certain google apps (YT and Maps crash, Chrome goes very slow and keeps stucking)
Ok, another bug: if u have password and not the system keyboard, after reboting u cant to enter password cause there is no any keyboard
i finally could download it
but with FIRMWARE Global_V12.0.2.0.QFGEUXM
error 1
i opened the zip file to change updater script and it's working
Flash Required Firmware (First-time only)
Which is the required firmware? Miui 12?
I have right now the Android 9 lineage rom. Can I install this rom from that one of should I install something before?
ruchimes said:
Flash Required Firmware (First-time only)
Which is the required firmware? Miui 12?
I have right now the Android 9 lineage rom. Can I install this rom from that one of should I install something before?
Click to expand...
Click to collapse
if you have a Android 9 rom i guess you have an old firmware too (one for android 9)
so you should flash firmware for android 10 (no fw is labeled android 11 yet)
i guess (i did not try) firmware V11.0.1.0.QFGMIXM should work (just like for crdroid v6.11)
https://xiaomifirmwareupdater.com/firmware/lavender/stable/V11.0.1.0.QFGMIXM/
or you can flash the lastest V12.0.1.0.QFGMIXM like i did but you need to edit the updater file to install the rom
flash also the last recovery !
https://orangefox.download/device/lavender
or
https://dl.twrp.me/lavender/
it's all write down in the first post.....
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware
silmium said:
if you have a Android 9 rom i guess you have an old firmware too (one for android 9)
so you should flash firmware for android 10 (no fw is labeled android 11 yet)
i guess (i did not try) firmware V11.0.1.0.QFGMIXM should work (just like for crdroid v6.11)
https://xiaomifirmwareupdater.com/firmware/lavender/stable/V11.0.1.0.QFGMIXM/
or you can flash the lastest V12.0.1.0.QFGMIXM like i did but you need to edit the updater file to install the rom
flash also the last recovery !
https://orangefox.download/device/lavender
or
https://dl.twrp.me/lavender/
it's all write down in the first post.....
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware
Click to expand...
Click to collapse
Thanks men, I didn't read the rom firmware required sentence in the bottom.
So, I can download V12.0.1.0.QFGMIXM, but how do I have to change the updater file? What do I need to put in there?
Also another doubt, the xiaomi.eu latest rom would work and provide the required firmware to later install this crdroid? Or should I better install the chinese one?
One more doubt (maybe not the last): do I have to do all the installs from recovery? Or the firmware is better to do it from the compute with XiaoMiFlash?
Thanks a lot
The required firmware is MIUI 11 not 12
letsmakecakes said:
The required firmware is MIUI 11 not 12
Click to expand...
Click to collapse
Can I install xiaomi.eu rom? Or better with global o china?
ruchimes said:
So, I can download V12.0.1.0.QFGMIXM, but how do I have to change the updater file? What do I need to put in there?
Click to expand...
Click to collapse
stick to v11 as it supposed to be :good:
ruchimes said:
Also another doubt, the xiaomi.eu latest rom would work and provide the required firmware to later install this crdroid? Or should I better install the chinese one?
Click to expand...
Click to collapse
eu global chinese fw are the same (except language i guess) i never saw any difference
go for the global firmware cause...it is "global"
ruchimes said:
One more doubt (maybe not the last): do I have to do all the installs from recovery? Or the firmware is better to do it from the compute with XiaoMiFlash?
Click to expand...
Click to collapse
you should ! easier faster less trouble
you never know what could go wrong when you do it with comp (drivers link or else)
but xiaomiflash should"flash xiaomi"s phone (if not what is the point ??)
you have to wipe everything to make a clean install
i don't know if your flash tool dirty flash or clean everything first
with recovery you format the partition or wipe it all and you know you are good to go for a clean intall
ruchimes said:
Can I install xiaomi.eu rom? Or better with global o china?
Click to expand...
Click to collapse
same thing !
so yes !
letsmakecakes said:
This is initial Beta Build . There maybe bugs more than mentioned. Please report as you find one .
Click to expand...
Click to collapse
Also, Wi-Fi tethering seems not working neither in 2.4 GHz nor in 5 GHz
after install storage can't decrypt in recovery
silmium said:
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware
Click to expand...
Click to collapse
On Android 10 Orangefox v.11 always decrypted the storage with my pin.
After a full clear installation of Android 11, I am unable to decrypt the DATA storage with my PIN (generated when the system first started).
The system is always unlocked with a pin code. But in recovery mode, decryption failed (with this pin code "Password failed, please try again!")
cos10 said:
after install storage can't decrypt in recovery
Click to expand...
Click to collapse
Did you format the data? Because that usually happens when you haven't formatted the data.
chippey5 said:
Did you format the data? Because that usually happens when you haven't formatted the data.
Click to expand...
Click to collapse
Yes. I wiped Dalvik / ART Cache, Cache, System, Vendor, Data.
After this in "Menu" tab /Manage Partition/Data & red button "Format Data"
Maybe need first "Change FS" ext4 to ext4 & then "Format Data"(i will try in new build)?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 21.2 or newer for root - (Download from here)
First time installation:
Download twrpboot.img & twrp.zip in your pc (link above) and extract zip file
Hotboot twrp from your pc with command fastboot boot boot-recovery.img
Wipe system wipe data wipe dalvik cache
Copy downloaded rom fom pc to your phone and start the installation
After installing flash twrp.zip and reboot to recovery again
Install gapps & magisk (optional) and then reboot your phone
Profit! (Enjoy your rom)
Update installation:
You can choose to update via seamless ota or use recovery mode method (here i will cover how to update via recovery mode)
Reboot to recovery from phone
Flash Rom.zip & Twrp.zip and reboot to recovery
Flash Gapps & magisk (optional) & reboot your phone
Profit! (Enjoy your rom)
Sources:
ROM: https://github.com/crdroidandroid
Device tree: DT
Common Device Tree: CDT
Vendor Tree: VDT
Kernel: kernel
Download:
ROM Mi A1 Tissot
Changelog:
Current Rom Changelog
Here
Changes From Previous Crdroid Build
Here
Known issues:
Freezes on Certain Apps
Visit official website @ crDroid.net
crDroid Tissot Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Working:
Camera/Video/Mic
Fingerprint
GPS
IMS (VoLTE)
RIL
Video playback
Wi-Fi
NightLight
CTS
DRM
FM
Encryption
WFD
Broken:
(Nothing Except Random Freezes)
Note: The ROM Does Not Include Gapps Feel Free to flash any gapps of your likings Open Gapps Beta are Recommended
Screenshots
Credits Section
I am not alone to bring it up to you guys alone there are many many and many people who helped me to achive this
and i would like to mention them
First I would like to thanks
@abhinavagrd_1129 even tho me and him started bringing up trees differently he was always there to guide me
& i would like to tell you that his Aosp Beta 3 Rom Inspired me to try to bringup trees
@SagarMakhar he is the one who fixed my noobish mistake i made everytime (also helped me to fix ril in the previous version)
@shivatejapeddi thanks to him VNDK29 issues were solved
@Lostark13 pointing and hinting me out for diffrent smaller things
Vince Device Devs (i picked there fixes thanks alot guys )
@jomadeto thanks alot for giving me a chance to handle this rom for our device i picked many stuff from him to retain original stuffs from him
my mates in tissot maintainer TG group
also my testers @hatethisusername,@NishatAhmed,@sauru660,@bhatia1583 this guys are my pro testers & because of them i have achived this stability in this rom
if i miss anyone from the list do let me know
FAQ's
1)Magisk Latest Beta is working?
a)Yes Full magisk is functional as well as you can use magisk hide without issues
2)Like previous Builds does this rom will update weekly?
a)No unless i find it important to do so i will update it bi-weekly or monthly
3)Chrome is freezing randomly?
a)it is because of DRM is crashing, because you are using root, to use it properly with root use latest magisk beta 21.x & hide magisk from settings & then reboot after it should be fixed
4)Random Freezes?
a)On all Android eleven based roms there are freezes issues abhinav managed to minimised them alot his kernel sources are not public but his Lineage OS Boot Image Works Just Fine In crDroid I am linking link for it use it and it should get fine
Download
instructions to Flash
Go to twrp
select Install Image Option
Navigate to Downloaded Bootimage Directory
flash this Boot Image
Flash (Twrp Installer Zip & Magisk Again)
Reboot
Note: (Install this Image In Either Lineage os Or Crdroid Or Other Lineage Based Roms only)
5)OTA updates are not booting up?
a)Gapps (Nik gapps & others may not able to restore gms after OTA update) i suggest to reinstall gapps from recovery that will solve the issue
6)Having low I/O Speeds?
a)Flash this Module it will disable Fuse But will increase I/O speeds drastically
Download (Flash from magisk) Credits to @jabiyeff21 for creating this module
Note: Encryption users do not flash this it will break encryption & you may not able to boot
More FAQ's will be added later if you have any querys reply to this specific post and i will answer your queries
Peru..?
I love you @murtaza1326
Sent from my Mi A1 using Tapatalk
murtaza1326 said:
Changes From Previous Crdroid Build
New Trees Based On Lineage os 17.1 (More stable then before)
Click to expand...
Click to collapse
Lineage 17.1? Android 11 or back to 10?
sag said:
Lineage 17.1? Android 11 or back to 10?
Click to expand...
Click to collapse
i redid everything from start
i started again from lineage os 17.1 trees (stuff to compile this rom) rom is still android eleven don't worry
Updated everything i could from now onwards kindly see all of my top 3 Owner post
thank you
Hi @murtaza1326 and congratulations for your new work !
I have installed this rom, following your instructions in OP but seems there is some problems.
When I restart in recovery, twrp is gone and there is only lineage recovery.
I know that this behaviour is due to our device that have A/B partition, so, when I flash a rom I do this step:
- go in the twrp (if I don't have that I do fastboot boot twrp....img)
- wipe system, data and cache
- installing rom
- installing twrp
- reboot in recovery
- installing rom
- installing twrp
- install gapps (optional)
- reboot
Ok, this get me a full rom functionally, very well.
Now, I want to root my device, so I boot into recovery and I flash Magisk v21.1 (or v21.00), when I reboot it come to fastboot loader and I can restore all only reload twrp by fastboot boot twrp....img, ecc....
Why I cant' install Magisk ?!
truevision said:
Hi @murtaza1326 and congratulations for your new work !
I have installed this rom, following your instructions in OP but seems there is some problems.
When I restart in recovery, twrp is gone and there is only lineage recovery.
I know that this behaviour is due to our device that have A/B partition, so, when I flash a rom I do this step:
- go in the twrp (if I don't have that I do fastboot boot twrp....img)
- wipe system, data and cache
- installing rom
- installing twrp
- reboot in recovery
- installing rom
- installing twrp
- install gapps (optional)
- reboot
Ok, this get me a full rom functionally, very well.
Now, I want to root my device, so I boot into recovery and I flash Magisk v21.1 (or v21.00), when I reboot it come to fastboot loader and I can restore all only reload twrp by fastboot boot twrp....img, ecc....
Why I cant' install Magisk ?!
Click to expand...
Click to collapse
my steps are correct and because of this behaviour i mentioned multiple times do not install twrp permanently
just use lineage os recovery & when you flash magisk from it
then it will be fine (if it says signature verification failed just select install anyway & it will install it)
again i repeat do not install permanent twrp zip if you want latest magisk to work
murtaza1326 said:
my steps are correct and because of this behaviour i mentioned multiple times do not install twrp permanently
just use lineage os recovery & when you flash magisk from it
then it will be fine (if it says signature verification failed just select install anyway & it will install it)
again i repeat do not install permanent twrp zip if you want latest magisk to work
Click to expand...
Click to collapse
mmm, is a behaviuor of rom based on Android 11 ?
I'm on crDroid 6.10 and many versions before, and twrp works always good, I installed Magisk 21.1 without problems.
twrp give me many usefull stuff, like backup and restore and is difficult to leave it...
And if I use a old version of Magisk, you think resolve it ?
truevision said:
mmm, is a behaviuor of rom based on Android 11 ?
I'm on crDroid 6.10 and many versions before, and twrp works always good, I installed Magisk 21.1 without problems.
twrp give me many usefull stuff, like backup and restore and is difficult to leave it...
And if I use a old version of Magisk, you think resolve it ?
Click to expand...
Click to collapse
yes kind if it is eleven behaviour
truevision said:
mmm, is a behaviuor of rom based on Android 11 ?
I'm on crDroid 6.10 and many versions before, and twrp works always good, I installed Magisk 21.1 without problems.
twrp give me many usefull stuff, like backup and restore and is difficult to leave it...
And if I use a old version of Magisk, you think resolve it ?
Click to expand...
Click to collapse
then magisk r is fine
also you can always hotboot & restore your stuff whenever you want so i don't see any issue there
When flashing through OTA Lineage recovery will be installed ? Because I have TWRP installed, but want to overwrite it on next update and use latest Magisk ,,
Hey, does this have an automatic call recording option for India?
Please let me know.
agm2112 said:
When flashing through OTA Lineage recovery will be installed ? Because I have TWRP installed, but want to overwrite it on next update and use latest Magisk ,,
Click to expand...
Click to collapse
it will if you don't reflash twrp over it again
shaikhatik0786 said:
Hey, does this have an automatic call recording option for India?
Please let me know.
Click to expand...
Click to collapse
no auto call recording but it has call recording feature
New Build is Up Link in OP post
Note:Clean Flash is Mandatory (Must clean flash this update because of new changes you might get issues)
murtaza1326 said:
New Build is Up Link in OP post
Note:Clean Flash is Mandatory (Must clean flash this update because of new changes you might get issues)
Click to expand...
Click to collapse
good job, thank
has bad wifi signal at low levels before the original image.
kloklo50 said:
has bad wifi signal at low levels before the original image.
Click to expand...
Click to collapse
explain it a bit?