Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/device_oneplus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/device_oneplus_sdm845-common
3. kernel: https://github.com/0ctobot/neutrino_kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/vendor_oneplus_sdm845-common
ROM sources on github: https://github.com/Colt-Enigma
Download here: https://androidfilehost.com/?fid=1899786940962581536
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.
Thanks for building this, am currently using it on op5t and it's super fine with great battery life
Let's see how it will perform in our op6
Do you will support your 10 Roms?
Sh0X31 said:
Do you will support for your 10 Roms?
Click to expand...
Click to collapse
Sure, it's not a problem to make a new build occasionally.
quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Really great dev, thanks for your hard work... Because of You, OP6 thread is RICH NOW...
No need to flash the oos zip at the start inorder to boot?
showstopper1 said:
No need to flash the oos zip at the start inorder to boot?
Click to expand...
Click to collapse
You need it for EVERY ROM OUT THERE BRO... flash oos twice... Then flash the rom
quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Dude this rom slays. Running great on fajita. Thanks man.
What the heck makes high brightness mode keep turning back on after I shut it off?
is this rom using may security?
cmart4 said:
is this rom using may security?
Click to expand...
Click to collapse
yup
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
sky104hk said:
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
Click to expand...
Click to collapse
It's Kernel Issue as it's already noticed in other rom as well..
..
ColtOS-Enigma 4.1: https://androidfilehost.com/?fid=1395089523397965580
You need to also flash this zip after flashing the rom in order to fix the messed up settings menu: https://androidfilehost.com/?fid=1395089523397965583 (thanks to Rakesh Batra from telegram).
CYB3R0ID694 said:
It's Kernel Issue as it's already noticed in other rom as well..
Click to expand...
Click to collapse
so any other custom kernel can try? pretty love smurf kernel but not quite compatible...
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
pmbonea said:
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
Click to expand...
Click to collapse
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Thanks a lot!:good:
quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Can you also merge the Finger Print patches for us 6T Users?
Mannan Qamar said:
Can you also merge the Finger Print patches for us 6T Users?
Click to expand...
Click to collapse
uh, i wouldnt know how to do that
Related
This one went official, download it here: https://sourceforge.net/projects/nitrogen-project/files/
First the usual bla bla bla, not responsible for loss of data or girlfriend or thermonuclear war etc etc....I'm not part of the dev team, this is an unofficial build, cannot really give much support, I can only promise a new build whenever there's a change in the sources.
Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/dev...plus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/dev..._sdm845-common
3. kernel: https://github.com/AOSiP-Devices/kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/ven..._sdm845-common
ROM sources on github: https://github.com/nitrogen-project
Download link: https://androidfilehost.com/?fid=1395089523397963595
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.
quake73 said:
First the usual bla bla bla, not responsible for loss of data or girlfriend or thermonuclear war etc etc....I'm not part of the dev team, this is an unofficial build, cannot really give much support, I can only promise a new build whenever there's a change in the sources.
Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/dev...plus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/dev..._sdm845-common
3. kernel: https://github.com/AOSiP-Devices/kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/ven..._sdm845-common
ROM sources on github: https://github.com/nitrogen-project
Download link: https://androidfilehost.com/?fid=1395089523397954289
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.
(The notification slider IS working in this one and it has these strange, rounded corners)
Click to expand...
Click to collapse
Thanks dude...do another pixel dirty.. that was coo
Almost forgot, short of the random reboot on your RR builds a few months back it had potential.. and the aokp was awesome, I rocked that one for a while..I cannot get your Paranoid Android to boot. I have the op6t..
fullofhell said:
Thanks dude...do another pixel dirty.. that was coo
Almost forgot, short of the random reboot on your RR builds a few months back it had potential.. and the aokp was awesome, I rocked that one for a while..I cannot get your Paranoid Android to boot. I have the op6t..
Click to expand...
Click to collapse
A lot of people mentioned RR, it is here: http://luis-builds.de/downloads/lineageos/rr/oneplus6//
PixelDirty got renamed to PrismaOS but they abandoned that project, their main dev said on telegram he couldnt maintain the project all by himself.
As for AOKP, hmmm....you gave me an idea to continue with it
(by the way, now i see you were one of the few who dloaded my roms on afh )
quake73 said:
A lot of people mentioned RR, it is here: http://luis-builds.de/downloads/lineageos/rr/oneplus6//
PixelDirty got renamed to PrismaOS but they abandoned that project, their main dev said on telegram he couldnt maintain the project all by himself.
As for AOKP, hmmm....you gave me an idea to continue with it
(by the way, now i see you were one of the few who dloaded my roms on afh )
Click to expand...
Click to collapse
Twas me indeed.. Been following your work for months..i was also the creep who wrote u on tg...been running nitrogen for almost a full day now. Good stuff. Yes indeed build aokp..
fullofhell said:
Twas me indeed.. Been following your work for months..i was also the creep who wrote u on tg...been running nitrogen for almost a full day now. Good stuff. Yes indeed build aokp..
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/development/rom-aokp-t3925617
New build with May security patch (android-9.0.0_r37)
https://androidfilehost.com/?fid=1395089523397961477
quake73 said:
New build with May security patch (android-9.0.0_r37)
https://androidfilehost.com/?fid=1395089523397961477
Click to expand...
Click to collapse
How's battery?
quake73 said:
New build with May security patch (android-9.0.0_r37)
https://androidfilehost.com/?fid=1395089523397961477
Click to expand...
Click to collapse
Thanks for the update, this one runs smoothly with zero problem so far. Hope it will go official soon...am using this as my daily driver
When is nitrogen os officially coming to op6 .. m currently locked on oos but I'll unlock when it gets available ?
pratik101 said:
When is nitrogen os officially coming to op6 .. m currently locked on oos but I'll unlock when it gets available ?
Click to expand...
Click to collapse
They promised soon in their tg channel
Latest build is nice
We should be using OOS 9.0.5 correct?
Couldn't get the slider to work
law16 said:
We should be using OOS 9.0.5 correct?
Couldn't get the slider to work
Click to expand...
Click to collapse
Same. And on 9.05 as well.
cmart4 said:
Same. And on 9.05 as well.
Click to expand...
Click to collapse
Sorry for the mess i made...i'm on my 5.5.2019 build and the slider works. Maybe the latest build was built with other device sources. In the future i'll try to just stick to the ones that work and not experiment.
As for the 9.0.4 vs 9.0.5 debate - i've heard 9.0.5 didnt bring any big changes, mostly cosmetics.
quake73 said:
Sorry for the mess i made...i'm on my 5.5.2019 build and the slider works. Maybe the latest build was built with other device sources. In the future i'll try to just stick to the ones that work and not experiment.
As for the 9.0.4 vs 9.0.5 debate - i've heard 9.0.5 didnt bring any big changes, mostly cosmetics.
Click to expand...
Click to collapse
No worries. Thanks for bringing all the roms to our device ?
quake73 said:
Sorry for the mess i made...i'm on my 5.5.2019 build and the slider works. Maybe the latest build was built with other device sources. In the future i'll try to just stick to the ones that work and not experiment.
As for the 9.0.4 vs 9.0.5 debate - i've heard 9.0.5 didnt bring any big changes, mostly cosmetics.
Click to expand...
Click to collapse
I didn't see 5/5/19 build just one from April and your latest from the 8th in android host... Guess we should just wait for you next build
law16 said:
I didn't see 5/5/19 build just one from April and your latest from the 8th in android host... Guess we should just wait for you next build
Click to expand...
Click to collapse
i admit, i made a mistake with my experiments, i should've stayed with aosip's sources, they seem to have some guy in their team who keeps updating the kernel for op6, always up to date, the device sources, too.
I should've listened to the saying - 'you dont change the winning horse midrace!'
today i even managed to screw the internet server at work and cannot access my pc there (which is my workhorse) but i'll make a nitro build at home
quake73 said:
i admit, i made a mistake with my experiments, i should've stayed with aosip's sources, they seem to have some guy in their team who keeps updating the kernel for op6, always up to date, the device sources, too.
I should've listened to the saying - 'you dont change the winning horse midrace!'
today i even managed to screw the internet server at work and cannot access my pc there (which is my workhorse) but i'll make a nitro build at home
Click to expand...
Click to collapse
No worries man! You've brought so much to the op6 we appreciate your work
quake73 said:
i admit, i made a mistake with my experiments, i should've stayed with aosip's sources, they seem to have some guy in their team who keeps updating the kernel for op6, always up to date, the device sources, too.
I should've listened to the saying - 'you dont change the winning horse midrace!'
today i even managed to screw the internet server at work and cannot access my pc there (which is my workhorse) but i'll make a nitro build at home
Click to expand...
Click to collapse
Thank you again, we appreciate what your doing for us all
cmart4 said:
Thank you again, we appreciate what your doing for us all
Click to expand...
Click to collapse
i've been doing it for the last 6 months...the difference is thatrecently i decided to share it publicly
Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03
It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots
Nice, I will try it ASAP...
ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!
@ABM30 are you on telegram?
methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？
New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?
alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.
[ROM][BIG Qs] Pixel Experience & EVOLUTION-X [03/22/20] from kenzo's developers lover
These are 2 big Q rom versions for kenzo phones:
- Pixel Experience, PE Plus
- EVOLUTION-X 4.1.69
Kernel source from Amol Amrit
Device tree: Amol, me, ...
Vendor: Amol, me, ...
Download:
- PE: https://www.androidfilehost.com/?w=files&flid=302856
- PE Plus: https://www.androidfilehost.com/?w=files&flid=306423
- Evo-X: https://www.androidfilehost.com/?w=files&flid=304880
Note: in Evo-x: removed RecorderPrebuilt bcz full system partition
How to:
- Backup your data
- Wipe: System, Cache, Dalvik-cache, and Data
- Flash the rom
DO NOT FLASH GAPPS, ALREADY INCLUDED
I'm blind here but I think it can work well with your kenzo! (my friends tested, confirmed)
Changelogs:
03/02/2020: first work for kenzo
03/09/2020 PE:
- Security patch 03/05/2020
- Update sources to r31
03/09/2020 EVO-X:
- Security patch 03/05/2020
- Update sources to r31
03/13/2020:
- fix goodix (thank @aranhid)
- revert back sources as first build
03/22/2020: Try boot PE Plus, Fix Navbar for EVO
06/5/2020:
- Evo-X 4.3 / Security patch 05/05/2020
How does the encryption work:
- Remove all PIN, Pattern, Password and Fingerprint locks
- Plug the charger to 80% power
- Select Encrypt Phone, ... the Phone will perform encrypt
- When encryption is complate, set Locks and use
All creadit Amol Amrit, magicxavi, Sagar Rokade, Abhishek Dubey,... and me !
Just an opinion, you should make the thread more informative such as are gapps included or not, the feature of the rom, known bugs, the screenshot,etc.
z1d4n21 said:
Just an opinion, you should make the thread more informative such as are gapps included or not, the feature of the rom, known bugs, the screenshot,etc.
Click to expand...
Click to collapse
Sorry. Im not having kenzo phone. I have hydrogen (Mi Max)
Yes Gapps is ALREADY INCLUDED and i think goodix fp is dead
Brother why you don't use magicxavi's tree? And if you update evo x monthly then i will flash your rom
How to delete gapps?
This ROM is great. Can you update it without gapps? Thank you
kof1ko said:
ROM's great, but I don't need gapps. How to delete them
Click to expand...
Click to collapse
Use a system app remover?
Hi, I just flashed the EvoX ROM and so far it's working well except that for some reason I can't access the double tap and long press settings for my hardware buttons. Any fix for that?
dungphp said:
Sorry. Im not having kenzo phone. I have hydrogen (Mi Max)
Yes Gapps is ALREADY INCLUDED and i think goodix fp is dead
Click to expand...
Click to collapse
Ok thanks for clarifying, the evo x one is really good tho.
MonirOfficial said:
Brother why you don't use magicxavi's tree? And if you update evo x monthly then i will flash your rom
Click to expand...
Click to collapse
I use my sources (using for my Mi Max) + kenzo sources. Will update when rom version updates, security update, big fixs,...
kof1ko said:
This ROM is great. Can you update it without gapps? Thank you
Click to expand...
Click to collapse
No, This rom is closely associated with Gapps or not it will be like Havoc, ...
AhmadKushairi said:
Hi, I just flashed the EvoX ROM and so far it's working well except that for some reason I can't access the double tap and long press settings for my hardware buttons. Any fix for that?
Click to expand...
Click to collapse
Find ít in Evo settings please
dungphp said:
I use my sources (using for my Mi Max) + kenzo sources. Will update when rom version updates, security update, big fixs,...
No, This rom is closely associated with Gapps or not it will be like Havoc, ...
Find
Click to expand...
Click to collapse
AhmadKushairi said:
dungphp said:
I use my sources (using for my Mi Max) + kenzo sources. Will update when rom version updates, security update, big fixs,...
No, This rom is closely associated with Gapps or not it will be like Havoc, ...
Find
Click to expand...
Click to collapse
Sorry for my bad English. I want to say if not, it will be like Havoc, ...
Click to expand...
Click to collapse
[Pixel Experience] Works great :) But...?
Will there be future updates for pixel experience and is it going to be official?
Ecabott said:
Will there be future updates for pixel experience and is it going to be official?
Click to expand...
Click to collapse
I will update but official is no
Hi bro rom is good but the network signal is unstable...
Hey @dungphp. I can't pass from setupwizard on evox. I've tried configure with wifi and mobile data, and in both of cases, I had to force reboot because config stoped at PIN or email.
By the way, tks for building evox and PE. I really like both.
snacs said:
Hey @dungphp. I can't pass from setupwizard on evox. I've tried configure with wifi and mobile data, and in both of cases, I had to force reboot because config stoped at PIN or email.
By the way, tks for building evox and PE. I really like both.
Click to expand...
Click to collapse
Clean flash friend !
dungphp said:
Clean flash friend !
Click to expand...
Click to collapse
Yes, clean flash with official TWRP. Factory reset -> advanced -> wipe dalvik, system, data, cache -> install rom -> reboot. At night I do again and grab logcat.
snacs said:
Yes, clean flash with official TWRP. Factory reset -> advanced -> wipe dalvik, system, data, cache -> install rom -> reboot. At night I do again and grab logcat.
Click to expand...
Click to collapse
Have you used any Q rom with TWRP office yet?
dungphp said:
Have you used any Q rom with TWRP office yet?
Click to expand...
Click to collapse
Yes. I'm now using MSM Extended v6
snacs said:
Yes. I'm now using MSM Extended v6
Click to expand...
Click to collapse
Get logcat here. But I think other people flash this rom no matter what, you ask more from those people.
How many Kenzo versions are there? Is the system capacity of 2 Gb?
Disclaimer: While i made effort to test this build as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or read guides.
Click to expand...
Click to collapse
Here's GlassROM. A rom made by @anupritaisno1, based on Lineage OS 17.1 .
It's mainly focused on speed and security.
Don't expect fabulous useless features.
It doesn't come with Gapps inbuilt.
Instructions :
That's the part where you use your brain
- Be sure to be on OOS 10.3.2 Stable
- Flash rom
- Enjoy
Click here to download
Here's the boot image but i couldn't boot on it, had to flash the rom through TWRP : boot.img
Kernel source : LOS SDM845
Credits :
Thanks to anupritaisno1 for its time, patience and coolness.
"The GNU GPL is a software license agreement, under which parts of the Android operating system are licensed. The majority of Android is licensed under the Apache license, but the Linux Kernel (which is present in every running Android ROM in some shape or form) is licensed under the GPL (version 2)"
reserved for nothing
yeet it's mine too
Imma pretend I didn't see this
Indeed
will rom be kept up-to-date or will this be the only build?
faabiano7 said:
will rom be kept up-to-date or will this be the only build?
Click to expand...
Click to collapse
Excellent question, thanks to ask ! I cannot promess to build monthly, so take it for a no
I would like to push builds with up to date security patch at least
anupritaisno1 said:
Imma pretend I didn't see this
Indeed
Click to expand...
Click to collapse
You can't see if i *poke your eyes with a pickaxe* :angel:
I will pretend i haven't seen this too
Don't expect me to resolve bugs and ****, i'm a newborn in this world and for now i do it for fun.
Add link of Kernel Source or thread will get closed..
Frog$kyWater said:
Here's GlassROM. A rom made by @anupritaisno1, based on Lineage OS 17.1 .
It's mainly focused on speed and security.
Don't expect fabulous useless features.
It doesn't come with Gapps inbuilt.
Instructions :
That's the part where you use your brain
- Be sure to be on OOS 10.3.2 Stable
- Flash rom
- Enjoy
Click here to download
Here's the boot image but i couldn't boot on it, had to flash the rom through TWRP : boot.img
Click to expand...
Click to collapse
Nano Gapps?
sschacko said:
Frog$kyWater said:
Here's GlassROM. A rom made by @anupritaisno1, based on Lineage OS 17.1 .
It's mainly focused on speed and security.
Don't expect fabulous useless features.
It doesn't come with Gapps inbuilt.
Instructions :
That's the part where you use your brain
- Be sure to be on OOS 10.3.2 Stable
- Flash rom
- Enjoy
Click here to download
Here's the boot image but i couldn't boot on it, had to flash the rom through TWRP : boot.img
Nano Gapps?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I would use them yes, haven't tested tho
sschacko said:
Frog$kyWater said:
Here's GlassROM. A rom made by @anupritaisno1, based on Lineage OS 17.1 .
It's mainly focused on speed and security.
Don't expect fabulous useless features.
It doesn't come with Gapps inbuilt.
Instructions :
That's the part where you use your brain
- Be sure to be on OOS 10.3.2 Stable
- Flash rom
- Enjoy
Click here to download
Here's the boot image but i couldn't boot on it, had to flash the rom through TWRP : boot.img
Nano Gapps?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
it makes no sense to use the gapps in a privacy-focused rom
faabiano7 said:
sschacko said:
it makes no sense to use the gapps in a privacy-focused rom
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Really like this ROM smooth and fast.
sschacko said:
Really like this ROM smooth and fast.
Click to expand...
Click to collapse
Glad you like it.
Neil_Armstrong_ said:
Glad you like it.
Click to expand...
Click to collapse
Any updates?
sschacko said:
Any updates?
Click to expand...
Click to collapse
If people expressly wish to use this daily, I'll try to update
I'm waiting for April security patch I guess
Neil_Armstrong_ said:
If people expressly wish to use this daily, I'll try to update
I'm waiting for April security patch I guess
Click to expand...
Click to collapse
Looking AOD while Charging. I love super touch sound and vibration, and Good battery life too. Really I like this Rom.
sschacko said:
Looking AOD while Charging. I love super touch sound and vibration, and Good battery life too. Really I like this Rom.
Click to expand...
Click to collapse
it's intended to be safe and reliable for you good fellow user(s)
The dev and i are happy you can enjoy this rom
we will strike again
Neil_Armstrong_ said:
it's intended to be safe and reliable for you good fellow user(s)
The dev and i are happy you can enjoy this rom
we will strike again
Click to expand...
Click to collapse
Thank you
Neil_Armstrong_ said:
it's intended to be safe and reliable for you good fellow user(s)
The dev and i are happy you can enjoy this rom
we will strike again
Click to expand...
Click to collapse
Can you add AOD , and AOD while Charging. Any Updates
sschacko said:
Can you add AOD , and AOD while Charging. Any Updates
Click to expand...
Click to collapse
I'm about to release an update
deleted
deleted
Reserved #1
Reserved #2
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Stan m said:
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Click to expand...
Click to collapse
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
BigChungus321 said:
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
Click to expand...
Click to collapse
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
BigChungus321 said:
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
Click to expand...
Click to collapse
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Stan m said:
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
Click to expand...
Click to collapse
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
_JaSoN_ said:
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Click to expand...
Click to collapse
Tysm!
Signature spoof is not really a big problem since there's a workaround for microg without signature spoof. Also thank goodness no erofs, I kinda like having system as r/w. OTA not a problem as well, would be cool though for a TG channel as a way to get notified on updates in the meantime. For anx and ntfs, welp I hope it works since I personally prefer stock camera images and use my SD card to restore backups.
I'm definitely going to give this rom a shot when I get bored of my current ROM.
_JaSoN_ said:
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
Click to expand...
Click to collapse
Stan m said:
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Click to expand...
Click to collapse
What about this?
Thank you.
Stan m said:
What about this?
Thank you.
Click to expand...
Click to collapse
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
_JaSoN_ said:
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
Click to expand...
Click to collapse
So that means this build will never be official? Because i think lineage requires stock kernel
Stan m said:
So that means this build will never be official? Because i think lineage requires stock kernel
Click to expand...
Click to collapse
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Aryannn999 said:
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Click to expand...
Click to collapse
so why not use that?
Anyone using this rom want to share their opinion?
Stan m said:
Anyone using this rom want to share their opinion?
Click to expand...
Click to collapse
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Hellera said:
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Click to expand...
Click to collapse
Thanks for the reply! Btw how are you using it since 2 weeks? this was released just 5 days ago
...maybe I was confused because I'm using lineage too on another phone, Oneplus-6T... sorry about this!