Database Develop

[ROM][6.0.1] CyanogenMod 13.1 Stable Builds (Unofficial)

CyanogenMod 13.1 Stable Builds (Unofficial)
STATUS: Abandoned, but heavily stable.
ROM Features:
Stable, clean, fast
Odexed, quicker boot
November 5 security update
Archived Downloads
Sources - Kernel Source

Reserved

Reserved

Oh boy your back!! Awesome man!

Great one @dgadelha.
What's new in this build?

FaizK said:
Great one @dgadelha.
What's new in this build?
Click to expand...
Click to collapse
Hi @FaizK,
This build includes the latest may security updates and many optimizations by myself for battery, performance, faster boot and stability.
Thanks!

dgadelha said:
Hi @FaizK,
This build includes the latest may security updates and many optimizations by myself for battery, performance, faster boot and stability.
Thanks!
Click to expand...
Click to collapse
Doze mode included?

FaizK said:
Doze mode included?
Click to expand...
Click to collapse
Hi @FaizK,
I can't confirm but Doze mode is set to be enabled once screen turns off.
Thanks.

Hi
Do i still need to use L speed app to optimize rom?
The optimizations is same with app?
Thank you

Can i dirty flash over your previous cm13.1 ?

sim is not detected,i did a clean flash

Nice @dgadelha you're back! Do i need to flash gapps in this rom? I will flash it now. Thanks!

simcard is not detected. many fc like media gapps even installing it clean.

shobint7 said:
simcard is not detected. many fc like media gapps even installing it clean.
Click to expand...
Click to collapse
I am not commenting against you, but did u check screenshots of 1st post. it clearlyshows signals in both sim. So something is wrong i ur procedure.
try to wipe system data and cache , flash rom , gapps , xposed then after boot by pass setup wizard without inserting sim. may b then it recognizes.
regards

herecomesmaggi said:
I am not commenting against you, but did u check screenshots of 1st post. it clearlyshows signals in both sim. So something is wrong i ur procedure.
try to wipe system data and cache , flash rom , gapps , xposed then after boot by pass setup wizard without inserting sim. may b then it recognizes.
regards
Click to expand...
Click to collapse
Ya i did this all but still no simcard detection and facing gapps error. so Im back to old cm13 build of dgadelha.

Everything works perfectly.
I don't have any FC's. SIM also is OK.

Finally. CyanogenMod ??
Sent from my ASUS_T00F using XDA-Developers mobile app

Thanks For developing for Zenfone 5!
One small question will you update Temasek Rom since it has more custom features than CM.

rkj911 said:
Thanks For developing for Zenfone 5!
One small question will you update Temasek Rom since it has more custom features than CM.
Click to expand...
Click to collapse
Hi @rkj911,
Due to the low download amount of Temasek, I'll not update it.
And, I'm just working on this CM13 on free times.
Thanks.

whats the free system space after flashing rom and gapps???and can i flash this on the older build of cm13.1 build by you?
systemCM-13.1-20160419.img
and
bootCM-13.1-20160504.img

GSI roms

Hi
Did anyone tried GSI roms on the MI9?
Please share your experience if you did

Phh is working on treble support. As always with GSI's you'll probably have the best experiences with vanilla.
See his progress thus far here (he's making progress on indisplay fp): https://github.com/phhusson/treble_experimentations/wiki/Xiaomi-Mi-9

CrazyBeaver2377 said:
Phh is working on treble support. As always with GSI's you'll probably have the best experiences with vanilla.
See his progress thus far here (he's making progress on indisplay fp): https://github.com/phhusson/treble_experimentations/wiki/Xiaomi-Mi-9
Click to expand...
Click to collapse
Best experience with vanilla? What do you mean with vanilla? AOSP or something else?
Another question: so it would be possible to flash the GSI according to the method Phh is explaining in your link? Only the fingerprint sensor wouldnt work, right?

Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.

AndroPlus said:
Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.
Click to expand...
Click to collapse
Great. Phh is also making good progress.
Honestly i'm probably not going to daily GSI myself. I'll await device tree bringup by someone and start building some roms then.
I sent you a PM a few days ago btw

AndroPlus said:
Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.
Click to expand...
Click to collapse
Very nice, I wasn't expecting ROMs that soon.
Btw, is the fingerprint scanner working already? I know that phh fixed it but sources are not released yet?

AndroPlus said:
Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.
Click to expand...
Click to collapse
Great! Do you intend on opening up an xda thread? Also will this rom be relatively stock, or will you aim to start adding features in?
Many thanks!

AndroPlus said:
Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.
Click to expand...
Click to collapse
I'm so glad to see you here! I have tried the ROM. It works like a shot, the problem I see is that the fingerprint reader doesn't work and the quality of the camera is terrible. I installed the Gcam but it gives me FC. I will follow your work very closely.
Thank you! and lots of encouragement!

CrazyBeaver2377 said:
Great. Phh is also making good progress.
Honestly i'm probably not going to daily GSI myself. I'll await device tree bringup by someone and start building some roms then.
I sent you a PM a few days ago btw
Click to expand...
Click to collapse
Sorry, was busy... I won't build non-GSI as GSI is good enough for me and somehow there were too many bugs happens only on non-GSI.
cd993 said:
Great! Do you intend on opening up an xda thread? Also will this rom be relatively stock, or will you aim to start adding features in?
Many thanks!
Click to expand...
Click to collapse
No, I won't open a thread. The rom is based on crDroid (based on LOS) so there are already plenty of features.
BoRoU said:
I'm so glad to see you here! I have tried the ROM. It works like a shot, the problem I see is that the fingerprint reader doesn't work and the quality of the camera is terrible. I installed the Gcam but it gives me FC. I will follow your work very closely.
Thank you! and lots of encouragement!
Click to expand...
Click to collapse
You can use xtreme v8 version.
https://forum.xda-developers.com/Mi-9/themes/xiaomi-mi9-googlecam-port-t3910034

AndroPlus said:
Sorry, was busy... I won't build non-GSI as GSI is good enough for me and somehow there were too many bugs happens only on non-GSI.
No, I won't open a thread. The rom is based on crDroid (based on LOS) so there are already plenty of features.
You can use xtreme v8 version.
https://forum.xda-developers.com/Mi-9/themes/xiaomi-mi9-googlecam-port-t3910034
Click to expand...
Click to collapse
Thanks!

AndroPlus said:
Sorry, was busy... I won't build non-GSI as GSI is good enough for me and somehow there were too many bugs happens only on non-GSI.
Click to expand...
Click to collapse
Hmm okay that's a shame to hear. Imo device specific roms would be better with the current state of GSI's/treble. They were never really intended for daily use and/or work perfectly on a single device. I'm hoping for someone else to step up soon and start working on device tree bringup.

AndroPlus said:
You can use xtreme v8 version.
https://forum.xda-developers.com/Mi-9/themes/xiaomi-mi9-googlecam-port-t3910034
Click to expand...
Click to collapse
Well, I just installed the latest version. With the xtreme it works well! I just miss the fingerprint. However, I'm going to try it for a few hours to see how it behaves!
Thanks for the job!

AndroPlus said:
Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.
Click to expand...
Click to collapse
Hi. Thanks for your work. I flashed it yesterday on my Sharp Aquos S2 and it boot and works well with the fix for selinux.

AndroPlus said:
Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.
Click to expand...
Click to collapse
work with mi9? how about camera

@AndroPlus whats differents between 21 march and 23 march builds?

Here is magisk path for BT in-call audio and tap to wake (force enabled):
https://drive.google.com/file/d/1JVQ-Qsw-Lzj4b7IiNlZEAocHvU5EYZTr/view?usp=sharing
This module also works on other GSIs. [EDIT] only on CAF based GSI such as LOS
Vihru said:
work with mi9? how about camera
Click to expand...
Click to collapse
Default camera (Snap) is not good, so you have to install Google Camera:
https://forum.xda-developers.com/Mi-9/themes/xiaomi-mi9-googlecam-port-t3910034
It works fine and I got clearer photo compared to Redmi Note 7 (GM1).
Lovetz said:
@AndroPlus whats differents between 21 march and 23 march builds?
Click to expand...
Click to collapse
General system stability improvements to enhance the user's experience™
...if you want to check what was changed, go to GitHub and read recent commits.
https://github.com/FlokoROM
https://github.com/crdroidandroid

@AndroPlus is it possible to dirtfy flash march 23 version over march 21? What steps I must made for this? I use gapps and magisk.

is it essy to get back to xiaomi.eu? if i try this.

AndroPlus said:
Finally I unlocked and flashed my FlokoROM, it's almost good for daily driver for me!
I need to fix BT in-call (by magisk patch) and rom's bug related to AOD, though.
https://treble.andro.plus/
If you need GApps on GSI, you should Repair/resize system partition in TWRP -> Wipe -> Advanced wipe and reboot recovery, mount system then flash latest OpenGApps.
I added fix for system-as-root device on OpenGApps yesterday, so you have to use 22 March or later build.
Click to expand...
Click to collapse
i think you should make own thread for that FlokoRom? would be nice to get news about it.. screenshots etc..

Lovetz said:
@AndroPlus is it possible to dirtfy flash march 23 version over march 21? What steps I must made for this? I use gapps and magisk.
Click to expand...
Click to collapse
Yes. You should flash system img, then flash gapps zip.

[ROM][AOSP][UNOFFICIAL] ColtOS Enigma 4.6 [ENCHILADA]

Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/device_oneplus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/device_oneplus_sdm845-common
3. kernel: https://github.com/0ctobot/neutrino_kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/vendor_oneplus_sdm845-common
ROM sources on github: https://github.com/Colt-Enigma
Download here: https://androidfilehost.com/?fid=1899786940962581536
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.

Thanks for building this, am currently using it on op5t and it's super fine with great battery life
Let's see how it will perform in our op6

Do you will support your 10 Roms?

Sh0X31 said:
Do you will support for your 10 Roms?
Click to expand...
Click to collapse
Sure, it's not a problem to make a new build occasionally.

quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Really great dev, thanks for your hard work... Because of You, OP6 thread is RICH NOW...

No need to flash the oos zip at the start inorder to boot?

showstopper1 said:
No need to flash the oos zip at the start inorder to boot?
Click to expand...
Click to collapse
You need it for EVERY ROM OUT THERE BRO... flash oos twice... Then flash the rom

quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Dude this rom slays. Running great on fajita. Thanks man.
What the heck makes high brightness mode keep turning back on after I shut it off?

is this rom using may security?

cmart4 said:
is this rom using may security?
Click to expand...
Click to collapse
yup

quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!

sky104hk said:
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
Click to expand...
Click to collapse
It's Kernel Issue as it's already noticed in other rom as well..

..

ColtOS-Enigma 4.1: https://androidfilehost.com/?fid=1395089523397965580
You need to also flash this zip after flashing the rom in order to fix the messed up settings menu: https://androidfilehost.com/?fid=1395089523397965583 (thanks to Rakesh Batra from telegram).

CYB3R0ID694 said:
It's Kernel Issue as it's already noticed in other rom as well..
Click to expand...
Click to collapse
so any other custom kernel can try? pretty love smurf kernel but not quite compatible...

Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?

pmbonea said:
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
Click to expand...
Click to collapse
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.

quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Thanks a lot!:good:

quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Can you also merge the Finger Print patches for us 6T Users?

Mannan Qamar said:
Can you also merge the Finger Print patches for us 6T Users?
Click to expand...
Click to collapse
uh, i wouldnt know how to do that

[ROM][9.0][UNOFFICIAL] OmniROM 9.0

Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03

It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots

Nice, I will try it ASAP...

ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.

methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!

@ABM30 are you on telegram?

methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？

New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...

vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.

Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?

Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?

ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.

Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?

methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?

alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.

methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?

methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?

alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need

i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why

now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.

Development [ROM][12.1][UNOFFICIAL][VANILLA][GAPPS] VoltageOS 1.6 for Mi 11 (Updated 23-June-2022)

VoltageOS 12.1 for Xiaomi Mi 11
ABOUT
Greetings, interested users! You have reached the gateway of a simplistic, no frills pure AOSP experience that will not let you down in getting through every day uninterrupted by inconveniences, with just the right dab of customizations. Be it requiring safetynet for banking or payment apps to receiving the latest security patches from Google as soon as they're released, we've got you covered. It doesn't end there. Sit back, relax and let the system theme your device according to your preferences with Monet support. Step in and begin your journey with Voltage OS.
Features
Pure AOSP
Latest Security Patches
Google Monet
SafetyNet
Github: https://github.com/VoltageOS
Website: https://voltage-os.sourceforge.io
WHAT WORKS?
Almost everything
NO GAPPS!
its a vanilla build, so gapps need to be flashed seperate
WHAT DOESN'T WORK?
You tell me
DOWNLOADS
click here to download (Vanilla) not updated for now
Gapps Version: click here to download
Installation Guide
Clean flash recommended
Always make a backup, be safe.
NikGapps Basic recommended for better experience.
- Clean flash recommended
1. Download the proper flashable ZIP for your device
2. Fastboot boot PE Recovery (or included boot.img)
3. Wipe Cache / Data / System
4. ADB Sideload ROM
5. ADB Sideload Gapps (optional)
6. ADB Sideload Magisk (optional)
7. Reboot to System
- Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash ROM
4. Wipe Cache
5. Reboot to System
ROM Source: https://github.com/VoltageOS
Kernel Source: https://github.com/kamikaonashi/kernel_xiaomi_venus

Ring & Alam & Notification sound not working

inae25 said:
Ring & Alam & Notification sound not working
Click to expand...
Click to collapse
New build in 40minutes, already fixed, sorry for the inconvenience, you can dirty flash it then

IEATMILKA said:
New build in 40minutes, already fixed, sorry for the inconvenience, you can dirty flash it then
Click to expand...
Click to collapse
Thank for update. i wait new update soon.

inae25 said:
Thank for update. i wait new update soon.
Click to expand...
Click to collapse
Build is up, same download folder as before
Sorry for the delay

Solid build thank you!

Hi to all. Before wipe my data, what advantage has this rom on daily use compared with pixel edition?

Great to see a vanilla ROM!
Does the ROM support signature spoofing? Would like to use microG, hate gapps..
Thanks!

nelvinchi said:
Great to see a vanilla ROM!
Does the ROM support signature spoofing? Would like to use microG, hate gapps..
Thanks!
Click to expand...
Click to collapse
Sorry for late reply, i didnt try to use signature spoofing, but looking at sources and commits, it should have signature spoofing enabled

Paolo83 said:
Hi to all. Before wipe my data, what advantage has this rom on daily use compared with pixel edition?
Click to expand...
Click to collapse
It has more customization, and no gapps, so you can install the gapps package you want.

Also, if anyone is facing battery drain, its because of screen off fod, you can disable it by using the setedit app and edit the "screen_off_udfps_enabled" to 0
Thanks for the tip @Paolo83

IEATMILKA said:
Also, if anyone is facing battery drain, its because of screen off fod, you can disable it by using the setedit app and edit the "screen_off_udfps_enabled" to 0
Click to expand...
Click to collapse
It Is my idea

Paolo83 said:
It Is my idea
Click to expand...
Click to collapse
Didnt know your name on here, catched it from TG, i credited you

Why not sideload Magisk
E: signature verification failed
E: error 21
Installation aborted.
Click to expand...
Click to collapse

inae25 said:
Why not sideload Magisk
Click to expand...
Click to collapse
You need to install magisk apk and patch boot.img, then flash boot.img to have root

KamiKaonashi said:
Sorry for late reply, i didnt try to use signature spoofing, but looking at sources and commits, it should have signature spoofing enabled
Click to expand...
Click to collapse
Great! I'll download and flash... Thanks!

23rd June 2022
Update:
New Gapps Version (vanilla not updated for now)
rebased device tree for further optimizations
upstreamed kernel
minimal gapps included, since more people wanted it
click here to download Gapps Version

Hello. I don't know if it's appropriate to ask the question here in this section, but I'd like to know if the ROM is going to have continuous maintenance since I'm thinking of installing it... Thank you very much.

nano122105 said:
Hello. I don't know if it's appropriate to ask the question here in this section, but I'd like to know if the ROM is going to have continuous maintenance since I'm thinking of installing it... Thank you very much.
Click to expand...
Click to collapse
I will maintain as long as possible