You should be having proper knowledge of flashing Custom ROM and how to Restore phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information/ files available on different English/ Chines websites into this thread, hence all Credit goes to respective developer/s. I am not a Developer and can't help you in making any further changes/ update to this ROM. I request XDA moderator and/ or Developer of Respective files to let me know if I have to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following files to Teste MIUI Oreo on Mi Max 2 (Oxygen). These ROMs are ported from different Xiaomi Redmi/ Mi devices and Stable enough for daily use on Mi Max 2. I have MM2 4/64 Global version. You need ROM files from either S. No. 3 OR 4 as per your choice.
1. Treble Mi Max 2 Recovery 3.2.1 (https://androidfilehost.com/?fid=5862345805528056270)
2. LineageOS 15.1 Treble ROM for MM2 (https://androidfilehost.com/?fid=11410932744536984455)
3. MIUI Oreo ROM ported from Mi Max 3 China version and 5 Patch files (2 patches are Zipped in ROM zip) (https://onedrive.live.com/?authkey=!ADOiQOH2AEPHPvw&id=675E0DE17AFE7624!1416&cid=675E0DE17AFE7624) (No Gapps included and refer below section for installing Google Play Store)
4. MIUIpro Oreo Rom ported from Redmi Note 4x 8.11.15. This includes Gapps and no need to install Google Play store separately. (https://mega.nz/#!8LxgSK5B!MiUdWqnJltPi_zXdHPAYd_abZhL8LMPdej5FfIfzspQ)
Now don't waste time and start flashing MIUI Oreo rom into MM2.
First step
Start your phone into recovery and Flash the Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Data, Cache, and Dalvick cache.
Above May have Mounted the System and Vendor after clearing.
Unmount the System and Vendor
Flash LOS-15.1 Rom as a normal zip ROM flashing process and DON'T reboot into system (this will make your phone treble enabled and update vendor automatically). No need to flash anything else.
Second step
Clear/ wipe System only
Mount the Vendor again
Enter the File management in Recovery and Delete following files:
/vendor/etc/permissions/qti_permissions.xml
/vendor/etc/permissions/qcrilhook.xml
/vendor/etc/permissions/telephonyservice.xml
/vendor/framework/qcrilhook.jar
/vendor/framework/QtiTelephonyServicelibrary.jar
/vendor/app/ has *.apk, delete /vendor/app/*.apk remaining (all apk in all sub-folder under /vendor/app/ folder)
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use unzip in pc and copy paste to recovery backup folder.)
Click Restore and Select only System and Swipe to confirm. Wait for restore to complete. If any error, Mount the Vendor and try again Restore System process. After Restore completes DON'T Reboot.
Third step
Mount the Vendor and System again.
Flash Patch1 and Patch2
Mount the Vendor and System again.
Flash BrightnessFix, WifiFix and SoundFix
Clear only DATA and boot into System. Wait for upto 10 Minutes or more to boot into System.
Warning: When you Flash the patch files, please mount the System and Vendor first to avoid error 7.
What work:
Camera, Fingerprint, Face unlock, Wifi, Sound, VoLte (No ECHO issue), Auto Brightness, OnScreen HW buttons
What doesn't work:
Some people can't log in to Xiaomi account. Don't try to Flash Dolby sound.
The dual 4G is not working. There may be potential signal problems for some user but I didn't faced in Delhi with Airtel operator. Eye protection mode/ reading mode.
Since base MIUI Oreo rom is Chinese version no Gapps included. To get Play store DO'NOT flash Gapps. You need Google app to have Play store working. Search on Google for more info or try as per link (https://www.techadvisor.co.uk/how-to/mobile-phone/install-google-play-xiaomi-3676150/).
Guys, this is a nearly perfect MIUI Oreo package for our lovely Xiaomi Mi Max 2 (Oxygen), miui pie's camera can't be used in this ROM. Since Xiaomi does not released the updated Kernel source for our Device, user may not be able to change the In Call Volume.
If I missed anything in the above, kindly let me know to include. If you found any further update/ patch that makes this ROM more stable/ perfect or enables new feature, please don't hesitate to ping me to include in this thread.
I am not including any Screen Shot as all MIUI Roms looks same and there is No UI change based on Android Version in MIUI.
Best of Luck and Happy Flashing
Reserved
sorry for my pedantry, oreo or orio [emoji4]
Hate_ said:
sorry for my pedantry, oreo or orio [emoji4]
Click to expand...
Click to collapse
Hahaha whatever you take
Hate_ said:
sorry for my pedantry, oreo or orio [emoji4]
Click to expand...
Click to collapse
Corrected
I will give it a whirl. Does it have night mode feature in developer settings?
can't see the extract button in recovery mate
i've done all the steps apart from extracting the rom files which i assume you mean the mi max 3 folder. there is no option in recovery to extract can see mate.
shingers5 said:
I will give it a whirl. Does it have night mode feature in developer settings?
can't see the extract button in recovery mate
i've done all the steps apart from extracting the rom files which i assume you mean the mi max 3 folder. there is no option in recovery to extract can see mate.
Click to expand...
Click to collapse
i had to manually extract files in windows and add to correct folders. please state that or add instructions as you stated. i then finished the steps and it booted fine. i got a internal system error and cant get past the xiaomi account. it wont let me log in or skip as saying unable to get device security and try again. i will try and flash again shortly following the steps to ensure success
shingers5 said:
i had to manually extract files in windows and add to correct folders. please state that or add instructions as you stated. i then finished the steps and it booted fine. i got a internal system error and cant get past the xiaomi account. it wont let me log in or skip as saying unable to get device security and try again. i will try and flash again shortly following the steps to ensure success
Click to expand...
Click to collapse
Yeah... that's the correct steps for extract to recovery backup folder. Anyway I added the same in OP now.
Just check you have Internet working while login in Xiaomi account. It takes some minutes to get mobile data activation on first boot.
[email protected] said:
Yeah... that's the correct steps for extract to recovery backup folder. Anyway I added the same in OP now.
Just check you have Internet working while login in Xiaomi account. It takes some minutes to get mobile data activation on first boot.
Click to expand...
Click to collapse
well it doesnt you need to add apn manually for me then save. but if you don't see it at first you just go out and back in you see it
to bypass that xiaomi account step just dont connect to wifi during setup it will fly past that. i am home screen now and i really like it. its full mi max 3 rom and you get the gestures as well as the hardware buttons. i recommend everyone to try it. i have full screen gestures and the hardware keys are also fully functional. no more back button to go back just swipe from left/right side and voila. its the chinese version of mi max 3 rom so just English but i have a mi max 3 so its no bother. use google app to install google services and thats that
---------- Post added at 07:15 PM ---------- Previous post was at 07:01 PM ----------
[email protected] said:
Yeah... that's the correct steps for extract to recovery backup folder. Anyway I added the same in OP now.
Just check you have Internet working while login in Xiaomi account. It takes some minutes to get mobile data activation on first boot.
Click to expand...
Click to collapse
only worry i have is battery drain as with these ports this is always an issue. could you provide direct link to the actual ROM thread so i can keep up to date with it or will you be doing that?
shingers5 said:
well it doesnt you need to add apn manually for me then save. but if you don't see it at first you just go out and back in you see it
to bypass that xiaomi account step just dont connect to wifi during setup it will fly past that. i am home screen now and i really like it. its full mi max 3 rom and you get the gestures as well as the hardware buttons. i recommend everyone to try it. i have full screen gestures and the hardware keys are also fully functional. no more back button to go back just swipe from left/right side and voila. its the chinese version of mi max 3 rom so just English but i have a mi max 3 so its no bother. use google app to install google services and thats that
Click to expand...
Click to collapse
It's good to know that you successfully flashed this.
Enjoy it and if other users also facing same apn issue, I will add that in OP. I didn't faced that apn issue.
shingers5 said:
well it doesnt you need to add apn manually for me then save. but if you don't see it at first you just go out and back in you see it
to bypass that xiaomi account step just dont connect to wifi during setup it will fly past that. i am home screen now and i really like it. its full mi max 3 rom and you get the gestures as well as the hardware buttons. i recommend everyone to try it. i have full screen gestures and the hardware keys are also fully functional. no more back button to go back just swipe from left/right side and voila. its the chinese version of mi max 3 rom so just English but i have a mi max 3 so its no bother. use google app to install google services and thats that
---------- Post added at 07:15 PM ---------- Previous post was at 07:01 PM ----------
only worry i have is battery drain as with these ports this is always an issue. could you provide direct link to the actual ROM thread so i can keep up to date with it or will you be doing that?
Click to expand...
Click to collapse
Nope, I am not a developer but a user and can't update.
I even don't have direct link of Chinese thread. I just got rom/ patch download link from mm2 telegram group.
Would it be possible for you to update it from the files available in download section.
[email protected] said:
Nope, I am not a developer but a user and can't update.
I even don't have direct link of Chinese thread. I just got rom/ patch download link from mm2 telegram group.
Would it be possible for you to update it from the files available in download section.
Click to expand...
Click to collapse
no we need the link to the thread for updates. cant find it anywhere as they will keep updating as they fix the bugs
What if we try with latest beta of max 3..
shingers5 said:
no we need the link to the thread for updates. cant find it anywhere as they will keep updating as they fix the bugs
Click to expand...
Click to collapse
May the pie works too.. there is a hope , let's see..
@[email protected] can I try.. if we can update it to latest..
---------- Post added at 01:39 AM ---------- Previous post was at 01:38 AM ----------
Woooow any screenshots?
Source?
rowad1985 said:
Woooow any screenshots?
Source?
Click to expand...
Click to collapse
its miui mate dont.need any the only major thing is android oreo
---------- Post added at 12:56 AM ---------- Previous post was at 12:51 AM ----------
no matter what i try i cant get to sign in with mi.account. error authenticating device every time.
thanks
shingers5 said:
its miui mate dont.need any the only major thing is android oreo
---------- Post added at 12:56 AM ---------- Previous post was at 12:51 AM ----------
no matter what i try i cant get to sign in with mi.account. error authenticating device every time.
Click to expand...
Click to collapse
It's sad to hear that you are not able to sign in Xiaomi account. But I signed in easily while setting up phone in first boot setup itself.
shingers5 said:
no we need the link to the thread for updates. cant find it anywhere as they will keep updating as they fix the bugs
Click to expand...
Click to collapse
Ohhh... could not have/ found the Chinese thread link otherwise I have already given the same in OP for credit to them.
May be they also stopped updating.
beingtejas said:
May the pie works too.. there is a hope , let's see..
@[email protected] can I try.. if we can update it to latest..
---------- Post added at 01:39 AM ---------- Previous post was at 01:38 AM ----------
Click to expand...
Click to collapse
I already tried many Pie roms and in my view we need Sound fix and Brightness fix (Pie based) to boot into system. Pie roms boots till boot animation and reboot itself before initial setup screen.
Anyway you can try and check where is the issue as you are a developer. I am sure you will find the solution.
rowad1985 said:
Woooow any screenshots?
Source?
Click to expand...
Click to collapse
Source I have already mentioned in thread...
Why you need screen shots for miui... All are same irrespective of android version.
Attaching one for you
Related
Hi everybody,
at the moment I have a big problem. For about 3 weeks I bought a Mi5 pro.
I have spent about 2 weeks reading about the possibility to become root. So first unlock the bootloader (is already done), installed MIUI 8.0.2.0 stable global with MyFlash and after that, installed root (SuperSU) with temporary TWRP. I have done this way: http://en.miui.com/thread-309596-1-1.html
Everything went good. But I have massive problems with bluetooth. There are many threads in the net about bluetooth and MIUI, it seems to be a old case.
I have read here ( https://xiaomi.eu/community/threads/smart-unlock-and-bluetooth-problem.32703/ ) that the problems with bluetooth come from MIUI. Because of that (and a little too because I dont like MIUI), I thought, that Cyanogenmod could be a chance. In first case for the bluetooth problem and in second case, because I like it.
Now I have a few questions about it.
I know how to install TWRP and this is not a problem. And install Cyanogenmod is really very simple.
1. If I install Cyanogenmod with TWRP, do I loose the unblocked bootloader?
2. If I want to go back to MIUI (dont hoppe that), because I have massive problems, can I make a full backup of my MIUI system now and later recover all like it was? Like Acronis TrueImage in Windows? And if it possible, how much about place does it take? I dont have many files likes videos or fotos. Just the system with some apps.
3. If I make backups from my apps in MIUI now with Titanium Backup (apps, settings, files), can I recover them later with Cyanogenmod? Or is something incompatible (some strings in the system or something like that)?
4. I really need root. Is there a version of Cyanogenmod with root or a simple way to do it in Cyanogenmod?
5. Is there a way to obtain OTA updates with a rooted phone from Cyanogenmod? Or every time I have to flash the whole firmware? In that case, the danger that something dont runs like it should is high.
6. Do you think I should give Cyanogenmod a try about the bluetooth problem or is it hopeless, because Cyanogenmod is based on MIUI?
I would be thankfull for every little help.
Regards.
1 - no
2- yes, backup will take max 3.3GB space (boot, data, system)
3- you can try restore them, if there will be some problem/force close just install app from play store
4- Settings -> About phone -> tap 8 times on "build number" -> this will enable Developer options. Now go to settings -> developer options -> Root access -> select what you want
5- If your phone is official supported by Cyanogenmod yes, check this website for you device: https://download.cyanogenmod.org/ If you find some UNOFFICIAL builds, you have to download full zip put on SD card and flash using TWRP. There is also UNOFFICIAL CM13 ROM with OTA update: http://forum.xda-developers.com/mi-5/development/unofficial-private-cyanogenmod-13-builds-t3426349
6- Cyanogen mod is NOT based on MIUI
veimus said:
1 - no
4- Settings -> About phone -> tap 8 times on "build number" -> this will enable Developer options. Now go to settings -> developer options -> Root access -> select what you want
Click to expand...
Click to collapse
Wow, that is what I name EASY!
But you say it is not based in MUIU, but what about that? http://forum.xda-developers.com/showpost.php?p=68597884&postcount=23
The talk about kernel sources, but is the same company. Maybe the bluetooth error is also in the kernel? What I dont hoppe.
And I read, that some users have problems installing CM13 with MIUI 8 installed, and that it is better to go back to MIUI 7 before installing CM13. Can anybody confirm this?
One last question: I would make a backup with twrp before. But everywhere I read, that it is better to that in a sd card. But my Mi5 pro dont have this. Is there a problem with this or is the backup in a safe place, even after I have installed CM13?
xdaerdeve said:
Wow, that is what I name EASY!
But you say it is not based in MUIU, but what about that? http://forum.xda-developers.com/showpost.php?p=68597884&postcount=23
The talk about kernel sources, but is the same company. Maybe the bluetooth error is also in the kernel? What I dont hoppe.
Click to expand...
Click to collapse
Xiaomi - company name (they release kernel source)
MIUI - system based on Android
Xiaomi released kernel source code so developers now they can build custom ROM, and for official CM support kernel source code are required With source code now they can even fix Bluetooth error- its impossible without source code. It's like application in Windows, you cant fix something inside that app if you don't have source code :]
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
xdaerdeve said:
And I read, that some users have problems installing CM13 with MIUI 8 installed, and that it is better to go back to MIUI 7 before installing CM13. Can anybody confirm this?
Click to expand...
Click to collapse
I always do a full wipe formatting system partition in TWRP and never had problem instaling CM13
---------- Post added at 08:19 PM ---------- Previous post was at 08:16 PM ----------
xdaerdeve said:
One last question: I would make a backup with twrp before. But everywhere I read, that it is better to that in a sd card. But my Mi5 pro dont have this. Is there a problem with this or is the backup in a safe place, even after I have installed CM13?
Click to expand...
Click to collapse
i have OTG adapter and I keep backup in USB stick like this one: http://www.ebay.ie/itm/VENTION-USB3...dapter-Converter-OTG-For-Phones-/172266246233
veimus said:
i have OTG adapter and I keep backup in USB stick like this one: http://www.ebay.ie/itm/VENTION-USB3...dapter-Converter-OTG-For-Phones-/172266246233
Click to expand...
Click to collapse
That means, I need something like that or can I make a backup in the phone storage? Maybe does TWRP does this in a safe place of the storage? Or does it go lost, when I install CM13?
I am ready. Everything gone good
Is it possible to change the key to go back and recents apps? For years I work with the key to go back at the right side and the key for menu on the left side. In CM is the other way round.
And I dont want to use the softkeys, I want to use the hardkeys from my Mi5 (more display available).
Thanks in forward.
i have solved the audio via headphone in cm13 for mi5, but as i m not eligible to reply post in the rom forum, so everyone can't enjoy it
---------- Post added at 01:21 PM ---------- Previous post was at 01:19 PM ----------
main problem of cm13 is now VolTE
Android Version : MIUI-11-EU-PIE Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working MIUI-11--EU-PIE running rom. With the help from Mohzuned. I have removed what I believe to be all of the bloat. We worked to modify a working pie vendor. Magisk v20 modified boot for root access, Just install magisk manager.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to Test MIUI-11-EU-PIE on Mi Max 2 (Oxygen). This ROM recovery is ported from the Xiaomi RedMi with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile and MOST features I need are currently working.
1a. Treble Mi Max 2 Recovery 3.2.1 https://androidfilehost.com/?fid=5862345805528056270
1b. OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
2. MIUI-11-EU-PIE
https://drive.google.com/file/d/15lRb49s75rqVV0Kg8C16Eao_BuTPvBWr/view?usp=drivesdk
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot.
What works:
?
What doesn't work:
?
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max HDD at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits.
Any Others Who May Have Been Missed
Best of Luck and Happy Flashing )
Camera/Torch.
Camera, fingerprint and fm radio, dont work, congratulations, good rom. Thanks.
Cool....... thanks dude
liammc83 said:
Camera/Torch.
Click to expand...
Click to collapse
Iam ready for the test ride......
I will test today. Thank you for your job!
Beast developer...too fast man thanks
If you will fix Camera and Torch it will be great! We are all waiting! Thank you!
---------- Post added at 06:51 AM ---------- Previous post was at 06:38 AM ----------
May be it is better to do Port from Mi Mix 2S? Camera and Torch worked on that port.
Bro.......
I cannot find the fingerprint option in the rom..?
Firstly I upgraded from the nougat rom.,it made me to suck....it booted but instantly rebooted to recovery on every boot......
Cannot find the fingerprint option ..,Cannot add the face unlock option due to the camera bug...,it's harder always using pattern/pin.,? flashlight ? issue is negligible.....
But mi cloud has no issues and working fine able to login..
Home button isn't working.,full screen guesture option isn't seen in the rom..
May be it's because of the redmi note 4x....it might be good if it's from max3 or mix2s as u done previously.,only hotspot bug majorly
You are too good bro....,you are beastly fast and tough..,???
Please fix the camera!!!
zavorotnii said:
Please fix the camera!!!
Click to expand...
Click to collapse
He is trying continuously and I believe soon it will be resolved.
zavorotnii said:
Please fix the camera!!!
Click to expand...
Click to collapse
I'm not screaming "Donate!!!!!"
I do this for free for a phone I no longer use, please be patient.
Considering all sources from xiaomi are outdated, And this is being done again for FREE with modifications on an ancient netbook.
I also can now verify, I have a working modified vendor/boot image that will run gsi images, But again since problems with vendor no camera, Still working on it.
Sorry, I just asked. I understand your position and ready to test new changes
No need to wait for me to port.
https://forum.xda-developers.com/mi-max-2/development/mi-max-2-oxygen-gsi-bootable-vendor-t3987191
I really liked this rom .. I want to use daily ... only thing that is bothering me is the home button and the camera that is not working? already have a solution? fingerprint to taste .. but you can use with the pin normally
Thanks to "O grupo de discussões sobre tecnologia e outras coisas!...https://t.me/VegaData " for your solution.
Download GSI https://drive.google.com/file/d/1EnLAwEBaYLeepTSuQ2iUSoE8lm-csTPw/view?usp=sharing
(MIUI11-Aonly-9-VegaDataTests-exp-20191209-ErfanGSI.img.gz) ---extract before use
Information:
Android Version: 9
Brand: Xiaomi
Model: POCO F1
Codename: beryllium
Build Type: beryllium-user
Build Number: PKQ1.180729.001
Incremental: V11.0.5.0.PEJMIXM
Tags: release-keys
Security Patch: 2019-10-01
Fingerprint: Xiaomi/beryllium/beryllium:9/PKQ1.180729.001/V11.0.5.0.PEJMIXM:user/release-keys
Description: beryllium-user 9 PKQ1.180729.001 V11.0.5.0.PEJMIXM release-keys
Raw Image Size: 2.49 GiB
Clean Installation
Step:
1. flash latest Firmware https://mega.nz/#!QDplSYab!mrB5f8875VghQHfrrGvid4iJICMopkq3anZCipLWzqo
2. flash Vendor https://mega.nz/#!ECAG1aIS!OuGf9eVoiJpg0xreeLIarAWs5GkuCbu9AwR95MSlO-g
3. flash GSI as System Image
4. flash Permissiver v4.zip https://mega.nz/#!ETIwHQJC!Go5NfpgXFy5gPw8gFG8JbUCch7Eijw4rDp3NVTkhd-M
5. flash Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip https://mega.nz/#!gTohmQaR!ZL5jCeatYXUzUMx_moJseJ9o7b1RoLUf3o_PfOtn_aw
--Mount System & Vendor
6. flash Sound Fix (fixaudiogsi.zip) https://mega.nz/#!AD52wIhD!FM5GruKjw76gRnXqqLrh73CsSIZmldANlZrzyfVlcX0
7. flash DropVendorLightHAL.zip https://mega.nz/#!QKgVxaCI!lJuYDA2HjpP8msTbB7uXzW5jlvHImmHBtjjAdjt5R5g
8. flash DisableForceEncryption_Treble_v20.1.zip https://mega.nz/#!BHgRWYDS!jfuIRqTPTjS_lVy2tfpSbVRfqmxqqadeLFttgbKmhYQ
Reboot
-Verify your MI Account.
1.connect your WiFi 2. input you mi password. ...wait
- Magisk manager add MIUI_Auto_Brightness_Fix_v4_(pie).zip
https://mega.nz/#F!hT5UkSAQ!VCiS_BVC0Jlobpo6EMLsDg
-install GMS.apk and reboot
Coming soon --- Fingerprint Fix
Really great rom, everything works. Only missing feature is the face unlock. It's crazy smooth rom.
Hi, i plan to flash this one, is it better to use xiaomi flashtool or flashing them by hand?
ƁɐⱤᶒ said:
Hi, i plan to flash this one, is it better to use xiaomi flashtool or flashing them by hand?
Click to expand...
Click to collapse
By hand
zuhero said:
By hand
Click to expand...
Click to collapse
ok thanks
got it, but has problem with brightness,at most it remains low
Another noob question, is it better to be in china rom before going further with Miui 11 -Erfan GSIs or it is ok if i am on the EU Rom ?
and should i do a clean install before flashing anything?
pietroarnoldi said:
got it, but has problem with brightness,at most it remains low
Click to expand...
Click to collapse
I have no brightness problems
---------- Post added at 07:08 AM ---------- Previous post was at 07:06 AM ----------
ƁɐⱤᶒ said:
Another noob question, is it better to be in china rom before going further with Miui 11 -Erfan GSIs or it is ok if i am on the EU Rom ?
and should i do a clean install before flashing anything?
Click to expand...
Click to collapse
I don't think it matters cuz you're gonna flash the latest firmware.
Okay so after everything done, after reboot i 've been asked to unlock the device with the mi account, that succeed; except i have a message saying "An internal problem with your device has occurred. Please contact the manufacturer for more information."
On the latest Mega link i didn't find Magisk Manager.
And the external storage is working Yay!
ƁɐⱤᶒ said:
Okay so after everything done, after reboot i 've been asked to unlock the device with the mi account, that succeed; except i have a message saying "An internal problem with your device has occurred. Please contact the manufacturer for more information."
On the latest Mega link i didn't find Magisk Manager.
And the external storage is working Yay!
Click to expand...
Click to collapse
That message only appears one time after every boot, it doesn't matter, just ignore it. I'm using the latest magisk canary, working like a charm.
Understood, but i have another issue with Chrome that trying to update 299ko
i already checked authorizations under app settings
and made a video here
https://youtu.be/sp7jtkbLuKk
weird things is that i could install two apps without problems; any thought?
otherwise, this rom runs incredibly faster than the original one o_0'
Thanks for that!:good:
ƁɐⱤᶒ said:
Understood, but i have another issue with Chrome that trying to update 299ko
i already checked authorizations under app settings
and made a video here
https://drive.google.com/file/d/1BnNj6CH1tkQp1NQttDiBbTx6mORoRX9a/view?usp=sharing
weird things is that i could install two apps without problems; any thought?
otherwise, this rom runs incredibly faster than the original one o_0'
Thanks for that!:good:
Click to expand...
Click to collapse
Never had issues with chrome, try to reinstall app or clear data and cache from playstore and reboot.
Hi.
A video tutorial would be fine.
Thanks.
DANI36ZGZ said:
Hi.
A video tutorial would be fine.
Thanks.
Click to expand...
Click to collapse
i agree this installation is a bit more specific than what i already encounter, but following the steps on post is ok.
Many thanks for a great ROM and awesome work!!!
Please help about flash procedure:
3. flash GSI as System Image
Where is it please? And hot to flash it as system image?
Thanks!
Tom, thanks for everything you have done.
Only one question: when you fix fingerprint, will we have to flash whole system again or maybe only a part of it? Reading mode going to be fixed? (block blue light,useful to study)
thanks.
Edit:
@nirh216
Dude, in the bottom side, right side, there's a option to image file. click it, then choose the huge file (about 2gb) you donwloaded and flash it.
Edit2: Physical home button it's kinda useless to unlock right now, right? I cant see to use it even to unlock it, only as "home button". And i did not installed fix for auto brightness because mine is working, and i could not find how to install it by magisk, if anyone has atuto for it. thanks.
Edit3: 2 bugs I found. 1st Nav bar stop working after a while, needing to restart device to work. 2nd brightness from screen is definetly low, like half the bright from normal stock rom ----> I guess brightness is a problem from pocophone and about nav bar seems like tasker was fckng it up
Thanks.
Edit4: last edit lol. My twrp seems to be gone after doing every step and i cant find to install it again. you guys have twrp working?
tom.android said:
Thanks to "O grupo de discussões sobre tecnologia e outras coisas!...https://t.me/VegaData " for your solution.
Download GSI https://drive.google.com/file/d/1EnLAwEBaYLeepTSuQ2iUSoE8lm-csTPw/view?usp=sharing
(MIUI11-Aonly-9-VegaDataTests-exp-20191209-ErfanGSI.img.gz) ---extract before use
Information:
Android Version: 9
Brand: Xiaomi
Model: POCO F1
Codename: beryllium
Build Type: beryllium-user
Build Number: PKQ1.180729.001
Incremental: V11.0.5.0.PEJMIXM
Tags: release-keys
Security Patch: 2019-10-01
Fingerprint: Xiaomi/beryllium/beryllium:9/PKQ1.180729.001/V11.0.5.0.PEJMIXM:user/release-keys
Description: beryllium-user 9 PKQ1.180729.001 V11.0.5.0.PEJMIXM release-keys
Raw Image Size: 2.49 GiB
Clean Installation
Step:
1. flash latest Firmware https://mega.nz/#!QDplSYab!mrB5f8875VghQHfrrGvid4iJICMopkq3anZCipLWzqo
2. flash Vendor https://mega.nz/#!ECAG1aIS!OuGf9eVoiJpg0xreeLIarAWs5GkuCbu9AwR95MSlO-g
3. flash GSI as System Image
4. flash Permissiver v4.zip https://mega.nz/#!ETIwHQJC!Go5NfpgXFy5gPw8gFG8JbUCch7Eijw4rDp3NVTkhd-M
5. flash Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip https://mega.nz/#!gTohmQaR!ZL5jCeatYXUzUMx_moJseJ9o7b1RoLUf3o_PfOtn_aw
--Mount System & Vendor
6. flash Sound Fix (fixaudiogsi.zip) https://mega.nz/#!AD52wIhD!FM5GruKjw76gRnXqqLrh73CsSIZmldANlZrzyfVlcX0
7. flash DropVendorLightHAL.zip https://mega.nz/#!QKgVxaCI!lJuYDA2HjpP8msTbB7uXzW5jlvHImmHBtjjAdjt5R5g
8. flash DisableForceEncryption_Treble_v20.1.zip https://mega.nz/#!BHgRWYDS!jfuIRqTPTjS_lVy2tfpSbVRfqmxqqadeLFttgbKmhYQ
Reboot
-Verify your MI Account.
1.connect your WiFi 2. input you mi password. ...wait
- Magisk manager add MIUI_Auto_Brightness_Fix_v4_(pie).zip
https://mega.nz/#F!hT5UkSAQ!VCiS_BVC0Jlobpo6EMLsDg
-install GMS.apk and reboot
Coming soon --- Fingerprint Fix
Click to expand...
Click to collapse
Hello, I installed this version, in <Additional Settings>, <Region>, it shows "CHINA" and I can't change to my "Brazil" region. How do I change?
evanderfreitas said:
Hello, I installed this version, in <Additional Settings>, <Region>, it shows "CHINA" and I can't change to my "Brazil" region. How do I change?
Click to expand...
Click to collapse
I don't think u can. But it doesn't change much anyway. I dont think it has Portuguese
Works well but..
That's the only rom i found that is smooth, and have dark mode
also the only one with Miui11 that support sdcard slot
So thanks a lot!! :good::good:
The only problem is that everything on the screen is too big, even if i reduce it with display settings or other settings.
Is there anything we can do ? Like flashing a zip with magisk that'll change that?
nabilrezki said:
That's the only rom i found that is smooth, and have dark mode
also the only one with Miui11 that support sdcard slot
So thanks a lot!! :good::good:
The only problem is that everything on the screen is too big, even if i reduce it with display settings or other settings.
Is there anything we can do ? Like flashing a zip with magisk that'll change that?
Click to expand...
Click to collapse
Just change dpi of the screen to 600 dp through developer settings
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
nizdi said:
Tom, thanks for everything you have done.
Only one question: when you fix fingerprint, will we have to flash whole system again or maybe only a part of it? Reading mode going to be fixed? (block blue light,useful to study)
thanks.
Edit:
@nirh216
Dude, in the bottom side, right side, there's a option to image file. click it, then choose the huge file (about 2gb) you donwloaded and flash it.
Edit2: Physical home button it's kinda useless to unlock right now, right? I cant see to use it even to unlock it, only as "home button". And i did not installed fix for auto brightness because mine is working, and i could not find how to install it by magisk, if anyone has atuto for it. thanks.
Edit3: 2 bugs I found. 1st Nav bar stop working after a while, needing to restart device to work. 2nd brightness from screen is definetly low, like half the bright from normal stock rom ----> I guess brightness is a problem from pocophone and about nav bar seems like tasker was fckng it up
Thanks.
Edit4: last edit lol. My twrp seems to be gone after doing every step and i cant find to install it again. you guys have twrp working?
Click to expand...
Click to collapse
No problem with twrp
I found that cn rom has few updates allready in v2.21 with a quite big changelog.. someone knows if is possible to flash it in global device?also is cn rom multilingual? FINALLY INSTALLED . Steps 1 Unolock bootloader!!Be SURE it stays unlocked by rebooting and see the message "this device is not safe ..etc... " Step 2 downloaded ad cn rom V 2.17 and install via updater!!!after that follow the "clean user data"etc.upon reboot you noticed that it will try to reboot till the icons prior to see homescreen.but it will reboot and reboot!!DONT PANIC!!! STEP 3 REINSTALL V 2.17 VIA OTG...MIRACLE congrats you are on CN rom.after set up feel free to update ,first in v 2.20 ,then V 2.21....P.S. i havent manage yet to add my google account,and playstore doesnt work even ive try to install google framework etc with Google installer v2,or v3.... UPDATE 2!I μanage to install GAPPS! Procedure is.flash magisk v 19.3 via twrp.then install the following open gapps package: https://sourceforge.net/projects/op...apps-arm64-9.0-pico-20190827.zip.md5/download reboot ENJOY the perfect NUBIA 7UI!
I also want to try the v2.21 CN ROM and I tried it few days ago but without results. I flashed the original files downloaded from Nubia but the phone does not boot.
I think I'm doing something wrong...
Did you clean flash via stock recovery?factory reset it before?
Anyone have link to download china rom?
andixxx81 said:
Anyone have link to download china rom?
Click to expand...
Click to collapse
http://romdownload.nubia.com/Z20/V2.21/NX627J-update.zip
andixxx81 said:
Anyone have link to download china rom?
Click to expand...
Click to collapse
Z953RR said:
http://romdownload.nubia.com/Z20/V2.21/NX627J-update.zip
Click to expand...
Click to collapse
Tell us if you can install it correctly... I tried it few days ago with TWRP with no results
mir2006 said:
Tell us if you can install it correctly... I tried it few days ago with TWRP with no results
Click to expand...
Click to collapse
Did you format data before?also is cn rom multilingual? Gapps?someone knows?
Z953RR said:
Did you format data before?also is cn rom multilingual? Gapps?someone knows?
Click to expand...
Click to collapse
Yes, I've format data before flash the zip but the phone doesn't boot. Chinese ROM only has English and Chinese languages and I think it comes without gapps.
mir2006 said:
Yes, I've format data before flash the zip but the phone doesn't boot. Chinese ROM only has English and Chinese languages and I think it comes without gapps.
Click to expand...
Click to collapse
Pitty.... I wonder when comes update to global version.i read in fb group that V.2.0.5 is in internal test.cant found any info btw...but ive found a working gcam w xmls (at least works on main sensor w night mode and astrophotography)
Z953RR said:
Pitty.... I wonder when comes update to global version.i read in fb group that V.2.0.5 is in internal test.cant found any info btw...but ive found a working gcam w xmls (at least works on main sensor w night mode and astrophotography)
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=80794101&postcount=68
Here is a link with the Chinese ROM with gapps zipped by an user but I can't install it without boot issue.
Which FB group are you talking about?
Search for "nubia smartphone"
Z953RR said:
Search for "nubia smartphone"
Click to expand...
Click to collapse
OK thanks...
In addition... I'm currently using a gcam with the option to enable the triple lens but it crashes so at the moment only the main lens is usable.
So you can't use the flashing instructions found on nubia website for flashing the chinese rom to the phone?
sgn15 said:
So you can't use the flashing instructions found on nubia website for flashing the chinese rom to the phone?
Click to expand...
Click to collapse
Is strange but I have not been able to install it... maybe I have to flash something else with TWRP but I don't know what.
---------- Post added at 01:54 PM ---------- Previous post was at 01:42 PM ----------
From chinese forum:
Nubia UI V2.21 official version for Z20 (NX627) has started full FOTA push. Cowboys are welcome to download and update !
Note precautions:
●Before you upgrade make sure the phone is fully charged mobile phone and data backup (recommended comes with backup software), so as not to cause the phone to upgrade data loss;●Before upgrading, cancellation of various screen lock, the upgrade process Please be sure to lay the phone flat, and do not touch the screen at will, and follow the on-screen instructions;●If you have obtained Root permission, please remove the Root permission, restore the normal version, and restore the factory settings before upgrading, otherwise It is easy to cause the upgrade to fail; ● This update is recommended to upgrade through FOTA : Click "Settings"-> "System Update"-> "Check for Updates" in order to upgrade after downloading the upgrade package; ●Problems encountered during use can be By feedback in theforum product feedback section. Update log: Note: Due to the suspension of the operation of "Travel Bonds", this update canceled the pet function in [Screen Off]. The inconvenience caused by this, please forgive me. Systemoptimization: system fluencyoptimization: system stabilityoptimization: palm screen experiencingoptimization: update system applications, including Maverick voice, app store, one-click machinetooloptimization: grab red envelope function experience,double-sided screenoptimization: music lighting Effectoptimization: Secondary screen display experienceMultimediaoptimization: Camera shooting effects in some scenesGame spaceoptimization: Highlight moments Functional experience
Click to expand...
Click to collapse
It recommends to flash the ROM via FOTA in the Settings section... and before flashing it also recommends to restore the phone and delete ROOT access.
@mir2006 have you try this method?https://www.getdroidtips.com/stock-rom-nubia-z20/
Z953RR said:
@mir2006 have you try this method?https://www.getdroidtips.com/stock-rom-nubia-z20/
Click to expand...
Click to collapse
I didn't know it so maybe I will try it, thanks :good:
Let me know pls how will goes so i can try z20 is my only device atm
So, can i change to CN rom over system update in settings?
Before i use CN rom,then change to global rom from system update local
Can revert again with this methode??
mir2006 said:
Is strange but I have not been able to install it... maybe I have to flash something else with TWRP but I don't know what.
---------- Post added at 01:54 PM ---------- Previous post was at 01:42 PM ----------
From chinese forum:
It recommends to flash the ROM via FOTA in the Settings section... and before flashing it also recommends to restore the phone and delete ROOT access.
Click to expand...
Click to collapse
Where did you get the instructions?
I'm referring to the instructions from nubia website for flashing global rom. Can you use same steps for flashing chinese rom? It obviously doesn't involve roo5/adb/twrp
sgn15 said:
Where did you get the instructions?
I'm referring to the instructions from nubia website for flashing global rom. Can you use same steps for flashing chinese rom? It obviously doesn't involve roo5/adb/twrp
Click to expand...
Click to collapse
From here:
https://bbs.app.nubia.cn/thread-1534133-1-1.html
Deleted by MarvinMod
Do I needed to format data for this?
Can you install viper4android from xda labs on stock android 10 with magisk.
Install viper4android, reboot and recheck magisk to see if it still works.
Cuz for Android 9, the moment I install any magisk modules and reboot, the magisk breaks and I have only partial root access ( root access given to apps before still works but access to newer apps doesn't)
Also what do you mean by open stock recovery folder? You mean stock rom we download from samfirm
JakunTech1010 said:
Do I needed to format data for this?
Click to expand...
Click to collapse
yes, follow instructions exactly as written
fizzingbees said:
Can you install viper4android from xda labs on stock android 10 with magisk.
Install viper4android, reboot and recheck magisk to see if it still works.
Cuz for Android 9, the moment I install any magisk modules and reboot, the magisk breaks and I have only partial root access ( root access given to apps before still works but access to newer apps doesn't)
Also what do you mean by open stock recovery folder? You mean stock rom we download from samfirm
Click to expand...
Click to collapse
yes, when you download the stock rom from samfirm, it becomes a folder with your stock .tar.md5 files inside, that's your stock rom folder I speak of. I do not know if it works for 9. give it a try and let us know. I have 10 and once you update, you cant downgrade due to samsungs fuse set.
FYI, you can remove the .md5 from the stock rom files for faster loading but odin wont check the integrity of the file.
also, did you know that viper is Los based? other custom roms base off of Los so just replace Los in the guide with the rom of your choice. should work but I don't know, I only stick with Los or Stock.
A705MN
good morning friend I did all the steps you told me and it remains in the lineage logo I believe that the Roms you sent me is from an A705FN and my model is an A705MN that is why it does not configure because it stays in the logo and then it restarts me in twrp
jalexis30 said:
good morning friend I did all the steps you told me and it remains in the lineage logo I believe that the Roms you sent me is from an A705FN and my model is an A705MN that is why it does not configure because it stays in the logo and then it restarts me in twrp
Click to expand...
Click to collapse
my model is a705mn as it says in my signature below, your missing a step somewhere, did you format data properly? I flashed my device while writing the steps then again following the steps. also, I didn't post any stock roms and the los rom works with all a70 devices.
in twrp click wipe, then click format data and type yes and hit enter or the check on the keyboard.
when installing los, step 7 requires format data and step 9 requires format data so in the Los guide there will me format data done twice. these steps are for android 10 users, I have a guide for android 9 users that im transferring here but it will be some time. if your on android 9, pm me and ill link that guide to you, otherwise, try that format data or start from scratch by flashing the entire stock rom.
A705MN
sorry excuse my friend so much but in the step of formatting what should I do or could you give me the steps to follow and sorry for so much inconvenience
---------- Post added at 06:44 PM ---------- Previous post was at 06:36 PM ----------
friend and i'm in stock roms android 9 it will be that is why you don't configure the lineage it will be that you send me the android 9 guide
jalexis30 said:
sorry excuse my friend so much but in the step of formatting what should I do or could you give me the steps to follow and sorry for so much inconvenience
---------- Post added at 06:44 PM ---------- Previous post was at 06:36 PM ----------
friend and i'm in stock roms android 9 it will be that is why you don't configure the lineage it will be that you send me the android 9 guide
Click to expand...
Click to collapse
as long as you haven't done anything else trying to get it running(if you have, start from scratch by flahing the entire stock rom using odin) otherwise, boot to twrp, click wipe, click format data, type yes and hit the check box in lower right corner, reboot.
if your on 9, use this guide, its a bit outdated but as I said im working on it.
https://forum.xda-developers.com/showpost.php?p=81649149&postcount=151
also, what are you wanting, lineage os or stock os?
A705MN
friend thank you very much and I was able to install everything thank you very much for your contribution and time really that this xda group is the best there are many thanks
MarvinMod said:
yes, when you download the stock rom from samfirm, it becomes a folder with your stock .tar.md5 files inside, that's your stock rom folder I speak of. I do not know if it works for 9. give it a try and let us know. I have 10 and once you update, you cant downgrade due to samsungs fuse set.
FYI, you can remove the .md5 from the stock rom files for faster loading but odin wont check the integrity of the file.
also, did you know that viper is Los based? other custom roms base off of Los so just replace Los in the guide with the rom of your choice. should work but I don't know, I only stick with Los or Stock.
Click to expand...
Click to collapse
Viper4android is not a rom
It's a sound driver
It's magisk module.
What I meant is can you install this magisk model or download viper4android v2.7.6.1 from xda labs, install, reboot and check if magisk is still functional on stock Samsung Android 10 rom.
Also isn't android 10 and android 9 bootloader of Samsung rom same... V5 bootloader? Why would it mess with downgrading.?
fizzingbees said:
Viper4android is not a rom
It's a sound driver
It's magisk module.
What I meant is can you install this magisk model or download viper4android v2.7.6.1 from xda labs, install, reboot and check if magisk is still functional on stock Samsung Android 10 rom.
Also isn't android 10 and android 9 bootloader of Samsung rom same... V5 bootloader? Why would it mess with downgrading.?
Click to expand...
Click to collapse
Just assumed it was a rom, my apologies. I will check that for you when i have time but ive tested many modules with magisk and they work as well as magisk. Android 10 was an overhaul, not the same rom as 9 but still V5, however, thats not really the issue other then for twrp. Samsung devices has a fuse set, when a samsung devices bootloader is upgraded, the device trips or as we say "burns" out a fuse. The device can not be downgraded. After an update from 9 to 10, if you power off, hold both vol keys and plug into pc, in download mode at the top will tell you if a fuse has been triggered and provisioned. This means you cant go from 10 back to 9.
MarvinMod said:
Just assumed it was a rom, my apologies. I will check that for you when i have time but ive tested many modules with magisk and they work as well as magisk. Android 10 was an overhaul, not the same rom as 9 but still V5, however, thats not really the issue other then for twrp. Samsung devices has a fuse set, when a samsung devices bootloader is upgraded, the device trips or as we say "burns" out a fuse. The device can not be downgraded. After an update from 9 to 10, if you power off, hold both vol keys and plug into pc, in download mode at the top will tell you if a fuse has been triggered and provisioned. This means you cant go from 10 back to 9.
Click to expand...
Click to collapse
Thank you. Please do report back with viper4android. It's proper working with magisk is critical for me.
I understand your explanation about e-fuse.
But then that last android 10 upgrade that had this charging pcb issue, people did downgraded back successfully to Android 9 then.
How did they do that if e-fuse got triggered?
Lets leave this argument here.
I don't want to sidetrack you from your twrp and root work for Android 10.
Please tell me how to delete img files from the AP file
Or do I just need to replace img files with lz.4 files
fizzingbees said:
Thank you. Please do report back with viper4android. It's proper working with magisk is critical for me.
I understand your explanation about e-fuse.
But then that last android 10 upgrade that had this charging pcb issue, people did downgraded back successfully to Android 9 then.
How did they do that if e-fuse got triggered?
Lets leave this argument here.
I don't want to sidetrack you from your twrp and root work for Android 10.
Click to expand...
Click to collapse
No one with a galaxy A70 has updated to Android 10 stock and then went back to Android 9 stock. Viper worked fine and i kept root.
kissa67zwi said:
Please tell me how to delete img files from the AP file
Or do I just need to replace img files with lz.4 files
Click to expand...
Click to collapse
Extract the contents of AP file using peazip into a new folder on your desktop. Name the folder AP. Inside the new folder will be the files you need to delete or move out depending on what guide you following. When youve made the necessary changes, repack that new folder with peazip into a .TAR and now its flashable. Do not worry about the .lz4 extension. To delete, as long as its not zipped, right click the file, choose delete. To move the file, right click and hold, drag and drop to wherever and choose move here.
Fyi everyone, ill be making some youtube videos of the instructions for newbies by end of the week. It will have start to finish including bootloader unlock.
MarvinMod said:
Fyi everyone, ill be making some youtube videos of the instructions for newbies by end of the week. It will have start to finish including bootloader unlock.
Click to expand...
Click to collapse
That would be helpful for lot.
Kindly do link your videos here for us when they get uploaded
---------- Post added at 03:31 PM ---------- Previous post was at 03:31 PM ----------
MarvinMod said:
No one with a galaxy A70 has updated to Android 10 stock and then went back to Android 9 stock. Viper worked fine and i kept root.
Click to expand...
Click to collapse
Good to hear.
Thanks for trying and reporting back
According to your instructions, I will be able to use tvrp on the Android 10 stock?Rооt is a worker?
naruba said:
According to your instructions, I will be able to use tvrp on the Android 10 stock?Rооt is a worker?
Click to expand...
Click to collapse
no,youll be using twrp to root stock 10 this method allows you to keep root and use modules. twrp does not work with android 10 stock due to some changes in 10. it does however work with custom roms. you can either have twrp, custom rom and magisk root or have stock rom and magisk root.