Related
Introduction
This is aimed to be a complete but simple guide for users which want to know what works in the Treble-World on the Mate 10 Pro and 'how to get there', based on other guides and my own findings
Disclaimer: I am not responsible for what you do with your device, you are free, probably old enough to know what you are doing and intelligent enough to read this through.
For the moment I will only speak about my own tests on a BLA L29 as I don't have the possibility to test everything.
Feel free to share your own discoveries via PM (just reuse the same formatting to make things easy)
Requirement
1. PC/Laptop running Windows 10 with adb and fastboot drivers installed
2. Original Huawei USB Type-C Cable
3. Being able to read and use search when a question arises
Summary
0. General Information
I. Unlock the Bootloader
II. Choose your ROM (a.k.a "What works on what")
III. Install your ROM
IV. Miscellaneous / Secondary stuff
V. Bonus : What to do if I am stuck / Bootlooping
0. General Information
To make things easier for everybody, here are some basic informations about your device and some common knowledge :
How do I get in Download / Bootloader / Fastboot Mode ?
Shut down your device, insert your USB cable. Keep the Volume DOWN button pressed and press the Power button, wait.
PRO TIPP : You may also get there from within android, first enable ADB debugging in developer options, then, on your PC open a command prompt and type "adb reboot-bootloader"
How do I get in Recovery Mode ?
While in Download / Bootloader / Fastboot Mode, take the USB cable out, keep the Volume UP button pressed and press the Power button until the phone reboots.
I. Unlock the Bootloader
We allready have a thread by @otonieru perfectly discussing this point, don't forget the Windows 10 fix :
https://forum.xda-developers.com/mate-10/how-to/how-to-huawei-mate-10-pro-standard-t3709535
II. Choose your ROM (a.k.a "What works on what")
This section isn't complete and should be detailed with time. None of these ROMs is specific for the Mate 10 Pro, but thanks to Treble, most images will work. Device-specific modifications are still needed in future, ask your local dev
1. Generic AOSP (Android 8.0 and 8.1) by Phhusson
Link : https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Description : Really basic ROM (basically pure AOSP) which serves as a basis for most of the other ROMs.
What's working : Everything basic
What's not working : VoLTE, SuperSU and Magisk, Signal strength is reported incorrectly, error message at each start, Play Store tends to hang (solution : wipe the Play Store from recents or force close it)
Actual status : Barebones, can be customized in some ways with overlays.
2. LineageOS 15.1 (Android 8.1) by LuK1337
Link : https://forum.xda-developers.com/honor-view-10/development/rom-lineageos-15-1-t3753000
Description : If you don't know LineageOS, you should have heard about CyanogenMod (CM). This is a super clean, customizable version of Android, based on AOSP
What's working : Everything basic
What's not working : VoLTE, SuperSU and Magisk (system crashes), Signal strength is reported incorrectly,
root works thanks to addon-su (see Miscellaneous)
Actual status : Working as a daily driver (at least in my case) if you can live with some very small drawbacks.
III. Install your ROM
Once you have unlocked your Bootloader and chosen the ROM your heart desires follow these steps :
1. BACK UP YOUR DATA ! -> You will certainly have to do a factory reset and backing up data should be something natural when flashing something on your phone, even before updates.
2. Download the ROM (latest is probably best, but it's best to read what is said in the respective threads before jumping in the hole.
3. Reboot to the Download / Bootloader / Fastboot Mode (see above)
4. Flash the ROM by opening a command prompt and typing :
Code:
fastboot flash system system.img
where "system.img" is the filename of the ROM you downloaded
5. Reboot the phone by typing :
Code:
fastboot reboot
6. The phone will probably get in a bootloop. Don't panic. This should be normal.
After 4-5 reboot the phone will go in Recovery mode. Make a Factory Reset
7. Reboot
8. Profit
IV. Miscellaneous / Device-Specific stuff
This is probably the more interesting part as it is quite hard to find the correct information for our device concerning these points.
Root
ROMs as Lineage don't come prerooted. To root your phone the only viable solution seems to be addon-su for the moment.
To install you will need to install TWRP (follow the instructions in this link by @Dees_Troy : https://forum.xda-developers.com/mate-10/development/recovery-twrp-3-2-1-0-touch-recovery-t3752399 ), boot to TWRP (same as booting to Recovery, as TWRP is the new Recovery). go to advanced -> adb sideload. Connect your phone to your PC and flash the file using
Code:
adb sideload addonsu-15.1-arm64.zip
finally reboot, go to 'developer options' and chose the desired option under 'root options'. Done.
Camera
When flashing a ROM it will probably come with the stock AOSP or Lineage camera which, just say it, sucks on our device form a quality point of view. Here are the answers found to this problem for the moment. Sadly, there isn't one solution which works for everything and everyone.
Google Camera - GCam
Photos work - Gallery works - Videos don't work
Right now his is probably the best compromise if you want something that works, easy to install, while not wanting every little gimmick (in that case you should probably stay on EMUI - The definition of gimmick). Simply install the apk.
Note : there are probably other versions of GCam that work or will work in future, feel free to inform me / us about better working versions.
Link : https://drive.google.com/file/d/1Rw2lXtSHvOUalpA8YKg_kW2Xj_Gu746M/view
More information / discussion :
https://forum.xda-developers.com/mate-10/help/gcam-mod-mate-10-t3729078
Camera Port from the Mate 9 - needs root
Photos work - Videos don't work - Gallery doesn't work - Most filters and gimmicks work
A bit more complicated to install. The easiest way found for now is to root first using addon-su and then copy the system folder inside this zip into the respective folders using a root enables explorer like solid explorer
Link : https://mega.nz/#!7hQDhQAK!p2s7jQp9-nhp2-O1U2s2GrBB9UVBhgKDtFfHTq_CHvI
More information / discussion : https://forum.xda-developers.com/pr...huawei-stock-camera-app-treble-roms-t3735169/
V. Bonus : What to do if I am stuck / Bootlooping
Remember when I said to back up ? Well I hope you did, because if you are really bootlooped and a reflash of the system image hasn't helped. you will have to reflash the whole device, which isn't quick.
Gladly @mankindtv has got you covered with his great guide : https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
I hope I could help a bit. Feel free to add your own findings, simply PM me.
Credits -
@otonieru for the great Bootloader unlocking thread
@phhusson for his many efforts to make Treble awesome
@LuK1337 for his many efforts to get things working on the Lineage side as well as for addon-su
@Dees_Troy for his awesome work on TWRP
@mankindtw for his great guide on recovering from the loops of boots
reserved
It's gonna be one of the most helpful threads for the novices.
---------- Post added at 02:41 AM ---------- Previous post was at 02:39 AM ----------
If possible, please add how to go back to stock rom in simplified form.
mdjishadk said:
It's gonna be one of the most helpful threads for the novices.
Click to expand...
Click to collapse
I have lost three days to get out of bootloops and gather the info... I hope nobody else will have to live the same thing (and maybe this can become a dedicated thread to fix the last missing blocks to have a complete experience)
good job
You can also root Lineageos with magisk. I did it and it works.
https://forum.xda-developers.com/mate-10/how-to/root-huawei-mate-10-pro-magisk-twrp-t3753956
good job on this one OP btw, video on mate 9 camera port is only broken on 8.1, on 8.0 all camera features work fine except opening of the picture from the camera app itself
Good job man!
Gryphie said:
You can also root Lineageos with magisk. I did it and it works.
https://forum.xda-developers.com/mate-10/how-to/root-huawei-mate-10-pro-magisk-twrp-t3753956
Click to expand...
Click to collapse
It might be android 8.1. It worked fine for me when using 20180225 version, didn't test later ones.
What version are you on?
Gryphie said:
You can also root Lineageos with magisk. I did it and it works.
https://forum.xda-developers.com/mate-10/how-to/root-huawei-mate-10-pro-magisk-twrp-t3753956
Click to expand...
Click to collapse
It crashed everything on my 8.1 build (and the developer himself recommended me addon-su) maybe a tad harder to use, but at least you learn something at the same time
You should add that the stereo speakers don't work.
Timate5 said:
You should add that the stereo speakers don't work.
Click to expand...
Click to collapse
"Stereo"... When coming from a Nexus 6P this Sally doesn't sound stereo at all... But you're right !
Android Auto doesn't work also on these ROMs. Phone says its incompatible because of some OMX codec issues
timo.helfer said:
Android Auto doesn't work also on these ROMs. Phone says its incompatible because of some OMX codec issues
Click to expand...
Click to collapse
That's too bad, android auto uses h264 streaming codec I think. I think this issue will have something to do with hardware acceleration. Have you tried messing around with the acceleration option found in the developer options to see if it might work?
Nice guide! Thank you @ChriKn!
Can you add to the "Generic AOSP (Android 8.0 and 8.1) by Phhusson"'s part that we need to use A-ONLY version of this rom?
I will try as soon as I have my PC.
Sad news, I got a good opportunity on a Pixel 2 XL and sold my Mate 10 Pro (I need my Pure Android AND Quality Camera)
Does someone want to take the thread over ?
ChriKn said:
I will try as soon as I have my PC.
Sad news, I got a good opportunity on a Pixel 2 XL and sold my Mate 10 Pro (I need my Pure Android AND Quality Camera)
Does someone want to take the thread over ?
Click to expand...
Click to collapse
Sure i can write some impressions. I just installed Carbon ROM.
I did flash but is not booting at all.
Hello, I did everything as mentioned. And phone is not booting it just bootloops.
i can't do a reset is sends me directly back to recovery and just ask to reboot or shutdown phone...
What do I have to do ?
Can i go to stock rom again ?
Thanks
triconix555 said:
Hello, I did everything as mentioned. And phone is not booting it just bootloops.
i can't do a reset is sends me directly back to recovery and just ask to reboot or shutdown phone...
What do I have to do ?
Can i go to stock rom again ?
Thanks
Click to expand...
Click to collapse
Let it Bootloop until it goes to erecovery and than factory reset it
Timate5 said:
Let it Bootloop until it goes to erecovery and than factory reset it
Click to expand...
Click to collapse
I did that but it is just boolooping again, I did all tge steos over and over and it just bootloops every tipe even after factory resete, it actualy asked le once to resete since then after a couole of reboots it goes straight to te erecovery, wherz it ask to login on a wifi to download latest bootloader and rom or reboot or shutdown device...
You should be having proper knowledge of flashing Custom ROM and how to Restore phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information/ files available on different English/ Chines websites into this thread, hence all Credit goes to respective developer/s. I am not a Developer and can't help you in making any further changes/ update to this ROM. I request XDA moderator and/ or Developer of Respective files to let me know if I have to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following files to Teste MIUI Oreo on Mi Max 2 (Oxygen). These ROMs are ported from different Xiaomi Redmi/ Mi devices and Stable enough for daily use on Mi Max 2. I have MM2 4/64 Global version. You need ROM files from either S. No. 3 OR 4 as per your choice.
1. Treble Mi Max 2 Recovery 3.2.1 (https://androidfilehost.com/?fid=5862345805528056270)
2. LineageOS 15.1 Treble ROM for MM2 (https://androidfilehost.com/?fid=11410932744536984455)
3. MIUI Oreo ROM ported from Mi Max 3 China version and 5 Patch files (2 patches are Zipped in ROM zip) (https://onedrive.live.com/?authkey=!ADOiQOH2AEPHPvw&id=675E0DE17AFE7624!1416&cid=675E0DE17AFE7624) (No Gapps included and refer below section for installing Google Play Store)
4. MIUIpro Oreo Rom ported from Redmi Note 4x 8.11.15. This includes Gapps and no need to install Google Play store separately. (https://mega.nz/#!8LxgSK5B!MiUdWqnJltPi_zXdHPAYd_abZhL8LMPdej5FfIfzspQ)
Now don't waste time and start flashing MIUI Oreo rom into MM2.
First step
Start your phone into recovery and Flash the Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Data, Cache, and Dalvick cache.
Above May have Mounted the System and Vendor after clearing.
Unmount the System and Vendor
Flash LOS-15.1 Rom as a normal zip ROM flashing process and DON'T reboot into system (this will make your phone treble enabled and update vendor automatically). No need to flash anything else.
Second step
Clear/ wipe System only
Mount the Vendor again
Enter the File management in Recovery and Delete following files:
/vendor/etc/permissions/qti_permissions.xml
/vendor/etc/permissions/qcrilhook.xml
/vendor/etc/permissions/telephonyservice.xml
/vendor/framework/qcrilhook.jar
/vendor/framework/QtiTelephonyServicelibrary.jar
/vendor/app/ has *.apk, delete /vendor/app/*.apk remaining (all apk in all sub-folder under /vendor/app/ folder)
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use unzip in pc and copy paste to recovery backup folder.)
Click Restore and Select only System and Swipe to confirm. Wait for restore to complete. If any error, Mount the Vendor and try again Restore System process. After Restore completes DON'T Reboot.
Third step
Mount the Vendor and System again.
Flash Patch1 and Patch2
Mount the Vendor and System again.
Flash BrightnessFix, WifiFix and SoundFix
Clear only DATA and boot into System. Wait for upto 10 Minutes or more to boot into System.
Warning: When you Flash the patch files, please mount the System and Vendor first to avoid error 7.
What work:
Camera, Fingerprint, Face unlock, Wifi, Sound, VoLte (No ECHO issue), Auto Brightness, OnScreen HW buttons
What doesn't work:
Some people can't log in to Xiaomi account. Don't try to Flash Dolby sound.
The dual 4G is not working. There may be potential signal problems for some user but I didn't faced in Delhi with Airtel operator. Eye protection mode/ reading mode.
Since base MIUI Oreo rom is Chinese version no Gapps included. To get Play store DO'NOT flash Gapps. You need Google app to have Play store working. Search on Google for more info or try as per link (https://www.techadvisor.co.uk/how-to/mobile-phone/install-google-play-xiaomi-3676150/).
Guys, this is a nearly perfect MIUI Oreo package for our lovely Xiaomi Mi Max 2 (Oxygen), miui pie's camera can't be used in this ROM. Since Xiaomi does not released the updated Kernel source for our Device, user may not be able to change the In Call Volume.
If I missed anything in the above, kindly let me know to include. If you found any further update/ patch that makes this ROM more stable/ perfect or enables new feature, please don't hesitate to ping me to include in this thread.
I am not including any Screen Shot as all MIUI Roms looks same and there is No UI change based on Android Version in MIUI.
Best of Luck and Happy Flashing
Reserved
sorry for my pedantry, oreo or orio [emoji4]
Hate_ said:
sorry for my pedantry, oreo or orio [emoji4]
Click to expand...
Click to collapse
Hahaha whatever you take
Hate_ said:
sorry for my pedantry, oreo or orio [emoji4]
Click to expand...
Click to collapse
Corrected
I will give it a whirl. Does it have night mode feature in developer settings?
can't see the extract button in recovery mate
i've done all the steps apart from extracting the rom files which i assume you mean the mi max 3 folder. there is no option in recovery to extract can see mate.
shingers5 said:
I will give it a whirl. Does it have night mode feature in developer settings?
can't see the extract button in recovery mate
i've done all the steps apart from extracting the rom files which i assume you mean the mi max 3 folder. there is no option in recovery to extract can see mate.
Click to expand...
Click to collapse
i had to manually extract files in windows and add to correct folders. please state that or add instructions as you stated. i then finished the steps and it booted fine. i got a internal system error and cant get past the xiaomi account. it wont let me log in or skip as saying unable to get device security and try again. i will try and flash again shortly following the steps to ensure success
shingers5 said:
i had to manually extract files in windows and add to correct folders. please state that or add instructions as you stated. i then finished the steps and it booted fine. i got a internal system error and cant get past the xiaomi account. it wont let me log in or skip as saying unable to get device security and try again. i will try and flash again shortly following the steps to ensure success
Click to expand...
Click to collapse
Yeah... that's the correct steps for extract to recovery backup folder. Anyway I added the same in OP now.
Just check you have Internet working while login in Xiaomi account. It takes some minutes to get mobile data activation on first boot.
[email protected] said:
Yeah... that's the correct steps for extract to recovery backup folder. Anyway I added the same in OP now.
Just check you have Internet working while login in Xiaomi account. It takes some minutes to get mobile data activation on first boot.
Click to expand...
Click to collapse
well it doesnt you need to add apn manually for me then save. but if you don't see it at first you just go out and back in you see it
to bypass that xiaomi account step just dont connect to wifi during setup it will fly past that. i am home screen now and i really like it. its full mi max 3 rom and you get the gestures as well as the hardware buttons. i recommend everyone to try it. i have full screen gestures and the hardware keys are also fully functional. no more back button to go back just swipe from left/right side and voila. its the chinese version of mi max 3 rom so just English but i have a mi max 3 so its no bother. use google app to install google services and thats that
---------- Post added at 07:15 PM ---------- Previous post was at 07:01 PM ----------
[email protected] said:
Yeah... that's the correct steps for extract to recovery backup folder. Anyway I added the same in OP now.
Just check you have Internet working while login in Xiaomi account. It takes some minutes to get mobile data activation on first boot.
Click to expand...
Click to collapse
only worry i have is battery drain as with these ports this is always an issue. could you provide direct link to the actual ROM thread so i can keep up to date with it or will you be doing that?
shingers5 said:
well it doesnt you need to add apn manually for me then save. but if you don't see it at first you just go out and back in you see it
to bypass that xiaomi account step just dont connect to wifi during setup it will fly past that. i am home screen now and i really like it. its full mi max 3 rom and you get the gestures as well as the hardware buttons. i recommend everyone to try it. i have full screen gestures and the hardware keys are also fully functional. no more back button to go back just swipe from left/right side and voila. its the chinese version of mi max 3 rom so just English but i have a mi max 3 so its no bother. use google app to install google services and thats that
Click to expand...
Click to collapse
It's good to know that you successfully flashed this.
Enjoy it and if other users also facing same apn issue, I will add that in OP. I didn't faced that apn issue.
shingers5 said:
well it doesnt you need to add apn manually for me then save. but if you don't see it at first you just go out and back in you see it
to bypass that xiaomi account step just dont connect to wifi during setup it will fly past that. i am home screen now and i really like it. its full mi max 3 rom and you get the gestures as well as the hardware buttons. i recommend everyone to try it. i have full screen gestures and the hardware keys are also fully functional. no more back button to go back just swipe from left/right side and voila. its the chinese version of mi max 3 rom so just English but i have a mi max 3 so its no bother. use google app to install google services and thats that
---------- Post added at 07:15 PM ---------- Previous post was at 07:01 PM ----------
only worry i have is battery drain as with these ports this is always an issue. could you provide direct link to the actual ROM thread so i can keep up to date with it or will you be doing that?
Click to expand...
Click to collapse
Nope, I am not a developer but a user and can't update.
I even don't have direct link of Chinese thread. I just got rom/ patch download link from mm2 telegram group.
Would it be possible for you to update it from the files available in download section.
[email protected] said:
Nope, I am not a developer but a user and can't update.
I even don't have direct link of Chinese thread. I just got rom/ patch download link from mm2 telegram group.
Would it be possible for you to update it from the files available in download section.
Click to expand...
Click to collapse
no we need the link to the thread for updates. cant find it anywhere as they will keep updating as they fix the bugs
What if we try with latest beta of max 3..
shingers5 said:
no we need the link to the thread for updates. cant find it anywhere as they will keep updating as they fix the bugs
Click to expand...
Click to collapse
May the pie works too.. there is a hope , let's see..
@[email protected] can I try.. if we can update it to latest..
---------- Post added at 01:39 AM ---------- Previous post was at 01:38 AM ----------
Woooow any screenshots?
Source?
rowad1985 said:
Woooow any screenshots?
Source?
Click to expand...
Click to collapse
its miui mate dont.need any the only major thing is android oreo
---------- Post added at 12:56 AM ---------- Previous post was at 12:51 AM ----------
no matter what i try i cant get to sign in with mi.account. error authenticating device every time.
thanks
shingers5 said:
its miui mate dont.need any the only major thing is android oreo
---------- Post added at 12:56 AM ---------- Previous post was at 12:51 AM ----------
no matter what i try i cant get to sign in with mi.account. error authenticating device every time.
Click to expand...
Click to collapse
It's sad to hear that you are not able to sign in Xiaomi account. But I signed in easily while setting up phone in first boot setup itself.
shingers5 said:
no we need the link to the thread for updates. cant find it anywhere as they will keep updating as they fix the bugs
Click to expand...
Click to collapse
Ohhh... could not have/ found the Chinese thread link otherwise I have already given the same in OP for credit to them.
May be they also stopped updating.
beingtejas said:
May the pie works too.. there is a hope , let's see..
@[email protected] can I try.. if we can update it to latest..
---------- Post added at 01:39 AM ---------- Previous post was at 01:38 AM ----------
Click to expand...
Click to collapse
I already tried many Pie roms and in my view we need Sound fix and Brightness fix (Pie based) to boot into system. Pie roms boots till boot animation and reboot itself before initial setup screen.
Anyway you can try and check where is the issue as you are a developer. I am sure you will find the solution.
rowad1985 said:
Woooow any screenshots?
Source?
Click to expand...
Click to collapse
Source I have already mentioned in thread...
Why you need screen shots for miui... All are same irrespective of android version.
Attaching one for you
Removed
Instructions can be found in the README on GitHub: https://github.com/Miustone/MARS_SOM
BETA4 uploading with some fixes and enhancements. Thanks to My Discord Channel and all the nice People keeping Me up! :angel:
@cd993 for being My (coming) Tester!
Is this rom even for the dual sim XQ-AT52 version?
Gigio755 said:
Is this rom even for the dual sim XQ-AT52 version?
Click to expand...
Click to collapse
It's a unified SOM for all Xperia Variants with API29 and Snapdragon SoCs. So yes :good:
My shared Kernels for Magisk are for and from the EU Firmware of the Xperias btw.
Just to add my experience here, I flashed this rom magisk module which entered a seemingly unrecoverable endless bootloop. This was likely as it conflicted with another magisk module or xposed that I have installed, so not the fault of the rom!
However given we've no twrp yet, the best way (after a LOT of research!) to fix this wasn't easy or obvious. I thought I could just flash stock kernel, uninstall magisk, flash magisk again and uninstall the module. Which unfortunately you can't as they remain in the system files and without root, you can't touch them, though with root, it loads and you get the bootloop - so a vicious endless cycle!
The solution I managed to work out, rather than a full clean wipe was to extract the stock boot from downloaded firmware (using Xperifirm), convert it to an img file using unsin (Google this if needed) and then use Android kitchen to unpack, place a certain folder in there (found via the link below), repack and then fastboot flash. This makes magisk operate in core root mode only allowing you to uninstall the module. Once the module is uninstalled, you can simply disable core only mode from the magisk settings.
This saved me from a full wipe!
See here for more details about that unpacking etc
https://forum.xda-developers.com/pi...modules-disabler-booting-magisk-t3976621/amp/
cd993 said:
Just to add my experience here, I flashed this rom magisk module which entered a seemingly unrecoverable endless bootloop. This was likely as it conflicted with another magisk module or xposed that I have installed, so not the fault of the rom!
However given we've no twrp yet, the best way (after a LOT of research!) to fix this wasn't easy or obvious. I thought I could just flash stock kernel, uninstall magisk, flash magisk again and uninstall the module. Which unfortunately you can't as they remain in the system files and without root, you can't touch them, though with root, it loads and you get the bootloop - so a vicious endless cycle!
The solution I managed to work out, rather than a full clean wipe was to extract the stock boot from downloaded firmware (using Xperifirm), convert it to an img file using unsin (Google this if needed) and then use Android kitchen to unpack, place a certain folder in there (found via the link below), repack and then fastboot flash. This makes magisk operate in core root mode only allowing you to uninstall the module. Once the module is uninstalled, you can simply disable core only mode from the magisk settings.
This saved me from a full wipe!
See here for more details about that unpacking etc
https://forum.xda-developers.com/pi...modules-disabler-booting-magisk-t3976621/amp/
Click to expand...
Click to collapse
Nice and complicated to Share! Thanks for Your Post! I would suggest next time to remove a specific File from the Firmware before flashing with NewFlasher which keeps Your Data intact. Let Me take a Look which one it was...
Edith: Remove userdata_X-FLASH-CUST-A2CD.sin before flashing or your data will be wiped.
Or in ur case userdata_BLAHBLAH.SIN
You can also try to enter Save Mode next time which works by Holding the Power Button while booting or so. Maybe together with VolumeDown and No USB connected.
Miustone said:
Nice and complicated to Share! Thanks for Your Post! I would suggest next time to remove a specific File from the Firmware before flashing with NewFlasher which keeps Your Data intact. Let Me take a Look which one it was...
Edith: Remove userdata_X-FLASH-CUST-A2CD.sin before flashing or your data will be wiped.
Or in ur case userdata_BLAHBLAH.SIN
You can also try to enter Save Mode next time which works by Holding the Power Button while booting or so. Maybe together with VolumeDown and No USB connected.
Click to expand...
Click to collapse
Ah that's very handy to know, thanks for the removal of userdata sin file tip!
cd993 said:
Ah that's very handy to know, thanks for the removal of userdata sin file tip!
Click to expand...
Click to collapse
You're Welcome ! And sorry for the Trouble. Looking Forward to fix everything... :angel:
Good to see development starting!
Hopefully something can be done with the cameras viewfinder which appears really poor than the shot actually being taken! Snapchat looks awful when taking video selfies
dreamville said:
Good to see development starting!
Hopefully something can be done with the cameras viewfinder which appears really poor than the shot actually being taken! Snapchat looks awful when taking video selfies
Click to expand...
Click to collapse
Agreed. I look like I'm wearing makeup on WhatsApp video calls!
Hello, dear developer.
Miustone said:
You're Welcome ! And sorry for the Trouble. Looking Forward to fix everything... :angel:
Click to expand...
Click to collapse
Hello, respected developer. (XQ-AT52) I am a user. I installed the rom after patching the boot.img extracted from two versions, the Taiwan version and the Hong Kong version, but both fall into infinite boot twice. Should I use the EU single SIM version?
---------- Post added at 03:57 PM ---------- Previous post was at 03:55 PM ----------
Hello, respected developer. (QX-AT52) I am a user. I installed the rom after patching the boot.img extracted from two versions, the Taiwan version and the Hong Kong version, but both fall into infinite boot twice. Should I use the EU single SIM version?
htcmage said:
Hello, respected developer. (XQ-AT52) I am a user. I installed the rom after patching the boot.img extracted from two versions, the Taiwan version and the Hong Kong version, but both fall into infinite boot twice. Should I use the EU single SIM version?
---------- Post added at 03:57 PM ---------- Previous post was at 03:55 PM ----------
Hello, respected developer. (QX-AT52) I am a user. I installed the rom after patching the boot.img extracted from two versions, the Taiwan version and the Hong Kong version, but both fall into infinite boot twice. Should I use the EU single SIM version?
Click to expand...
Click to collapse
You could, but im working on the Support for the Mark 2 actually. Sadly am i unable to extract the Firmware of it. Could you Help me Out with a dump?
Miustone said:
[...] Sadly am i unable to extract the Firmware of it. Could you Help me Out with a dump?
Click to expand...
Click to collapse
UnSIN *super*.sin to get the img file, and 7zip to extract img contents ( windows: right click > open > # | linux: UnSIN thread, read up "Note: super_*.img ..." ).
Stock camera, Cinema Pro, Photo Pro all gone in this ROM or working just fine?
serajr said:
UnSIN *super*.sin to get the img file, and 7zip to extract img contents ( windows: right click > open > # | linux: UnSIN thread, read up "Note: super_*.img ..." ).
Click to expand...
Click to collapse
Honored to get that Reply from You. Know Your Work Well since many Years :good: I will try 7Zip now:fingers-crossed:
Onepunchbro said:
Stock camera, Cinema Pro, Photo Pro all gone in this ROM or working just fine?
Click to expand...
Click to collapse
It should work just fine. At least does Cinema Pro on the Xperia 1 and 5. Photo Pro will be Something to Port for 2019 Xperias but isn't touched or removed yet...
Miustone said:
Feature List:
(Not everything is listed)
Full Camera API2
Full Pixel User Interface
Ported Pixel 4 XL Apps
Ported Pixel 4 XL Features
Click to expand...
Click to collapse
I've never used a SOM ROM and I'm a bit confused on what you mean by "full camera API2".
Stock, the Xperia 1 ii only has FULL Camera2 API support and RAW output for the main 24mm camera. All other cameras have LIMITED Camera2 API support and no RAW support.
Does the SOM ROM somehow enable FULL Camera2 API and RAW for all lenses on the phone?
Sent from my SM-G965F using Tapatalk
fuzzybabybunny said:
I've never used a SOM ROM and I'm a bit confused on what you mean by "full camera API2".
Stock, the Xperia 1 ii only has FULL Camera2 API support and RAW output for the main 24mm camera. All other cameras have LIMITED Camera2 API support and no RAW support.
Does the SOM ROM somehow enable FULL Camera2 API and RAW for all lenses on the phone?
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Yes, there is advanced support present for Open Camera for example allowing You to use all API2 Features on all Sensors including the Front Camera.
V20071 comes soon btw. Website and GitHub are getting Updates too...
BR
Does using custom on latest generation Xperia Phone still erases some sort of Camera DRM and in the end users are getting downgraded camera performance like in the past Xperias? Or such thing are no longer the case and it is perfectly safe to use custom ROM and switch back to stock ROM whenever needed?
Great Developer
Great Developer, can I ask you one more thing? Unlike Xperia 1& products, Qualcomm's diagnostic port activation order does not apply. (setprop sys.usb.config rndis,eng_mode,adb ) Can you help me with the development of the command? It's small, but I'll definitely sponsor you.
NcX 2.5 A71 ROMPretty straight forward, I took OneUI 2.5 firmware, debloated it and added a few features which can be found here: Link to MODs
My plan is to make this the best version of OneUI 2.5 with more features and fixed things (my mission is to fix Secure Folder in the near future) Fixed
Anyway, let's get started.
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Features!
TWRP Included
Full OneUI 2.5 features
Debloated
Added camera features
Dolby Atmos without earphones
Optimized
Edge Lighting fully enabled
Secure Folder fixed
Smart View fixed
Samsung Health fixed
Samsung OCR service
Bugs!
Secure Folder broken (will try to fix later) Fixed on 2.5.1
Samsung Pass broken (because of knox 0x1, duh) Removed from ROM, it will never work.
Bug with AOD brightness when you use fingerprint unlock method. This bug happens when you have AOD to always show. If AOD is showing, then you turn the screen on to only show lockscreen clock and then turn the screen off for AOD to show, the brightness of AOD will reduce to the most minimal and it will be hard to see, regardless of what brightness you set up. There are 2 ways to getting rid of this bug:
Disable unlocking phone with fingerprint
Unlocking your phone and then locking it again. This will only fix it until you trigger the bug again
Fixed, clock animation removed.
You tell me
Changelog!
25/Oct/2020 (NcX 2.5.2):
Added 60 fps recording on selfie cam
Added wide selfies. (a biiiiit buggy, but serviceable)
Added 24 fps recording modes on pro video mode
Fixed Samsung Health
Added Samsung OCR Service for better text extraction
12/Oct/2020 (NcX 2.5.1):
Secure Folder fixed
Smart View fixed
AOD bug fixed
Removed Samsung Pass
Removed Samsung Daily
Removed "Tips" app
Removed Bixby
Added camera features
08/Oct/2020: Release
Links!
(V2.5.2)Google Drive
(V2.5.1)Google Drive
(V2.5)Google Drive
PrequisitesMANDATORY ALWAYS: SD Card. It IS possible to have it on internal storage but ONLY if you are not encrypted. If you are encrypted, then you will need to FORMAT DATA and that will delete everything in your internal storage and you won't be able to add it back to internal storage with TWRP because MTP is broken.For installing 2.5.1/2.5.2:
Installing and following NcX 2.5 installation steps, as well as its prequesites
TWRP Installed (included in NcX 2.5)
Download multidisabler.zip (link: From Telegram Group (also attached on this thread) and add to SD Card or internal storage
Download Magisk zip installer to your SD Card or internal storage
For installing 2.5:
Update to bootloader U3 (either install OneUI 2.1 or OneUI 2.5 fully with Odin), otherwise you will have problems with camera
Fully unlock bootloader. I don't mean just turning OEM unlock on in developer settings , I mean FULLY unlock. If you didn't know, Samsung changed up how you unlock the bootloader on newer devices like this one. @topjohnwu gets a little more specific here: Explanation but I'm going to quote the important stuff to FULLY unlock bootloader:
Unlocking BL on modern Samsung devices have some caveats, so I figure this would be helpful.
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: reboot and press the download mode key combo for your device.
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
Go through the initial setup. Skip through all the steps since data will be wiped again later.
Connect the device to Internet during the setup.
Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader.
Your bootloader now accepts unofficial images in download mode.
Click to expand...
Click to collapse
Download Magisk zip installer to your SD Card or internal storage
Download multidisabler.zip (link: From Telegram Group and also attached in this thread) and add to SD Card or internal storage
Instructions!For installing 2.5.1/2.5.2:
Reboot to TWRP
Flash NcX 2.5.1.img or NcX 2.5.2 as "super" image in TWRP
Reboot to Recovery
Format data if you are coming from Stock ROM. If you are coming from NcX 2.5 then you don't need to wipe or format, you can just skip this step.
Flash multidisabler (this is required always)
Flash Magisk zip (optional)
Reboot and wait patiently
For installing 2.5:
Reboot to download mode and add AP_NcX 2.5 A71 in AP on Odin
Uncheck the Auto reboot option in Odin
Flash
When it is finished, force a manual reboot (keep pressing VOL - and Power buttons together)
Immediately when phone reboots, boot to recovery mode (VOL + and Power button)
If your phone was unencrypted before, just do a normal wipe. If your phone was not unencrypted before, do a full data format (Go to WIPE option in TWRP, select FORMAT DATA button at the bottom and they type yes on the keyboard. This will completely wipe your internal storage so be sure to backup and photos, music, etc... you have in internal media.)
Flash multidisabler to ensure you do not get encrypted
Flash magisk (I don't know if this is mandatory, I would fully recommend it though)
Reboot and wait patiently
Credits! @ananjaser1211 for all your help and always willing to lend a helping hand
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@sac23 for his tutorial on how to fix Secure Folder which you can find here: https://forum.xda-developers.com/showpost.php?p=82978861&postcount=1522
@Belco02 for the extra camera modes and features
@ianmacd in Telegram group TWRP/Root Samsung Android Devices for compiling TWRP for us
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX 2.5 for A71, ROM for the Samsung Galaxy A71
Contributors
ShaDisNX255, Ian Macdonald
Source Code: https://github.com/ianmacd/twrp_a71
Source Code: https://github.com/ianmacd/a71
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: OneUI 2.5
Version Information
Status: Stable
Current Stable Version: 2.5
Stable Release Date: 2020-10-08
Created 2020-10-08
Last Updated 2020-10-08
Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group
Join our Discord group
Code:
Check out the latest projects on our Discord, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Discord
Android group in spanish
Link: Grupo Android
FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of NcX again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] I flashed magisk on TWRP but no apps are asking for SU Permission
[A] Make sure you have the Magisk Manager app installed
[Q] I don't see Magisk Manager in my apps
[A] You need to download the manager from the official source: https://github.com/topjohnwu/Magisk
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice
How to report a bug/Ask for a change
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway
Enjoy guys, keep on the lookout for updates. I plan on adding more MODs and fixes
Attach the singletake .xml also here
sankhauaa said:
Attach the singletake .xml also here
Click to expand...
Click to collapse
I'll hold it off.
Plan on adding a future update with this and more stuff included
Good mod! Downloading...
well done mate, nice to see
New update hopefully tomorrow.
What's new?
-Fix Secure Folder, now working
-Fix Smart View mirroring, now working
-Adding CSC features, in progress
When i try to do the process of unlocking again It say after long press volume up. Lock Bootloader? Guess thats not what i want? My device is rooted stock with twrp installed..... Do you have an idea.?
I want to install your rom.
hans3103 said:
When i try to do the process of unlocking again It say after long press volume up. Lock Bootloader? Guess thats not what i want? My device is rooted stock with twrp installed..... Do you have an idea.?
I want to install your rom.
Click to expand...
Click to collapse
If you've already rooted, that means you have fully unlocked bootloader and it means that you can now freely install my ROM.
I installed it, it look very good. Its a big timesaver also. I used to root this device in a time comsuming way. This rom is very easy.... Very nice work!
hans3103 said:
I installed it, it look very good. Its a big timesaver also. I used to root this device in a time comsuming way. This rom is very easy.... Very nice work!
Click to expand...
Click to collapse
Thanks, next version will be easier to flash, just with super.img flash on TWRP.
ShaDisNX255 said:
Thanks, next version will be easier to flash, just with super.img flash on TWRP.
Click to expand...
Click to collapse
I will try it for sure, can I do an update or do I have to make a clean install?
hans3103 said:
I will try it for sure, can I do an update or do I have to make a clean install?
Click to expand...
Click to collapse
It can be installed with current version so no need to wipe data
ShaDisNX255 said:
It can be installed with current version so no need to wipe data
Click to expand...
Click to collapse
Very nice....many thanks!
nice business friend
Even if resizing in vendor, it will be nice because it will be very possible to make mod and custom kernel
No idea
my galaxy a71 its still in bootloop. bootloader fully unlocked with oem activated. data formated, installed decrypted data, and magisk zip installed, pls help..
zorexblade said:
my galaxy a71 its still in bootloop. bootloader fully unlocked with oem activated. data formated, installed decrypted data, and magisk zip installed, pls help..
Click to expand...
Click to collapse
Are you getting to boot animation?
Were there any red messages in TWRP when you were installing?
** Standard Disclaimer: Unlocking your Bootloader will Void your Warranty. I take no responsibility for this or for any bricked devices. These thing should go without saying at this point, but there they are. If you are here, I assume you are familiar with LineageOS, TWRP, and moving from MIUI to AOSP-based ROMs**
I've built a clean version of LineageOS 17.1 for Mi 9 that includes Signature Spoofing, but no other modifications.
This will allow those who are interested to get full MicroG support without the need of using any sort of Patcher or Magisk/XPosed Module. YOu all may have used my previous LineageOS Clean,Stock ROM and this is just an updated build of that ROM + Signature Spoofing to make life easier for those who want MicroG.
I flashed this and followed the simple steps of installing F-Droid, adding the MicroG Repo, and Installing the necessary packages via F-Droid and confirmed MicroG Self-check passes all the tests (once you finish granting the necessary permissions for each).
I prefer this over the NanoDroid or other patching methods as a much cleaner way to use MicroG with LineageOS.
Proprietary Blobs/Device Tree are DRG-Developer's as referenced in their post: here
Kernel source is by DRG-Developer: here
Xiaomi Hardware package used is the primary LineageOS from their github here
My reason for this is that there does not seem to be an officially-supported build for our device on the LineageOS for MicroG project or a recent, unofficial build.
What Works:
Pretty much everything from what I can tell
Fingerprint Sensor it working like a champ so far.
DT2W/DT2S
NFC Seems to be working but I don't have a device to test against
Known Issues:
You tell me...
Download:
849.98 MB file on MEGA
mega.nz
Prerequisite:
Make sure you are running a current AOSP/MIUI ROM with the latest firmware flashed and TWRP Installed
Install:
From TWRP:
1) Wipe Date (standard wipe)
2) Format Date ---> 'yes'
3) push ROM zip to /sdcard/
4) Flash ROM zip
4b) - OPTIONAL - Flash Magisk Zip for Root
5) Reboot to system
If you want to to install MicroG, just follow the steps outlined here in the "Install" section to get F-Droid installed, add the MicroG Repo, and install the handful of apps needed. No need for any of the patching steps.
DRG-Developer's device trees were last updated on 2020-10-18 so expect this build to reflect that. So far everything seems to function very well.
Does it support GApps too or it's only for MicroG?
Edit:
I test it and It's working well with GApps
Thanks for your build.
Vogie said:
Does it support GApps too or it's only for MicroG?
Edit:
I test it and It's working well with GApps
Thanks for your build.
Click to expand...
Click to collapse
Thanks for testing! If you find any bugs, please post them here. I may not be able to troubleshoot everything but at least other users will be aware.
What changes between your older release of LineageOS 17.1? https://forum.xda-developers.com/t/...ineageos-17-1-clean-stock-2020-07-10.4041523/
ICanTrollU said:
What changes between your older release of LineageOS 17.1? https://forum.xda-developers.com/t/...ineageos-17-1-clean-stock-2020-07-10.4041523/
Click to expand...
Click to collapse
Later/updated device trees and built-in Signature Spoofing that you don't get with stock Lineage.
photonmedia said:
Thanks for testing! If you find any bugs, please post them here. I may not be able to troubleshoot everything but at least other users will be aware.
Click to expand...
Click to collapse
Sure,
I'm using this ROM for daily use since yesterday and seems like very stable since now and battery life is good.
I missed `Internet Band-with Speed indicator` and `three finger swipe screen shot gesture` that I think these features are not available in LineageOS.
Vogie said:
Sure,
I'm using this ROM for daily use since yesterday and seems like very stable since now and battery life is good.
I missed `Internet Band-with Speed indicator` and `three finger swipe screen shot gesture` that I think these features are not available in LineageOS.
Click to expand...
Click to collapse
Yes, I do not believe those are included in stock LineageOS.
photonmedia said:
Yes, I do not believe those are included in stock LineageOS.
Click to expand...
Click to collapse
I didn't find any issue that relate to ROM, it's quite stable
I just have a issue on ANXCamera self camera that force close the ANXCamera that I think is not related to ROM
photonmedia said:
...
What Works:
...
NFC Seems to be working but I don't have a device to test against
Click to expand...
Click to collapse
This morning I checked NFC by sending a picture from my MI 9 to my wife's Mi 9T (also equipped with LOS). The transfer was successfull!
Thank you very much for providing this clean (stock) ROM!
Hi,
I've just unlocked my device and flashed Mauronofrio's TWRP afer that, i've installed this rom. And everytime it seems to be bootlooping. Showing the MI logo and after that it turns off and goes back to the Mi logo again. I've tried flashing it a few times, wiping data / system ETC. At the moment I'm restoring it with flashtool to get it back working. But am I doing something wrong?
nico445 said:
Hi,
I've just unlocked my device and flashed Mauronofrio's TWRP afer that, i've installed this rom. And everytime it seems to be bootlooping. Showing the MI logo and after that it turns off and goes back to the Mi logo again. I've tried flashing it a few times, wiping data / system ETC. At the moment I'm restoring it with flashtool to get it back working. But am I doing something wrong?
Click to expand...
Click to collapse
Did you wipe data AND "Format" Data? When you Format data is asks you to confirm by typing "yes" in the TWRP Recovery. Try Wiping and Formatting data, then push the ROM to the phone and Flash.
Ah that was probably it. ADB Sideload wasn't co-operating so i've flashed the rom first and after that wiped + formatted the data. Thanks! I've just restored the phone but will try this later again.
nico445 said:
Ah that was probably it. ADB Sideload wasn't co-operating so i've flashed the rom first and after that wiped + formatted the data. Thanks! I've just restored the phone but will try this later again.
Click to expand...
Click to collapse
Also, be sure you are coming from an updated ROM running current firmware.
Thank for your build ;-)
Are NFC Payements working on it?
john_matrix said:
Thank for your build ;-)
Are NFC Payements working on it?
Click to expand...
Click to collapse
I have not tested payments. Another user confirmed that file transfer via NFC works. I do not use NFC for payments so cannot test.
Hi, does screen off fod work?
Your rom is really simple stock rom, but there is something that I can't make it work. Waze has been my pain, the map dont load and I cant make it run. Anyway you did a good job. You discovered how can we put updates in the rom?
theandroid02 said:
Hi, does screen off fod work?
Click to expand...
Click to collapse
No, you have to double-tap to wake or hit the power button to wake the screen before you can use the fingerprint scanner.
Vinicius7 said:
Your rom is really simple stock rom, but there is something that I can't make it work. Waze has been my pain, the map dont load and I cant make it run. Anyway you did a good job. You discovered how can we put updates in the rom?
Click to expand...
Click to collapse
After installing, did you Install F-Droid and enable the Magisk repositories to install the necessary Magisk Modules and Location Backends? Then in the MicroG settings ensure all the checkboxes are checked?
Thanks for making this ROM. Really appreciate it.
The only small issue I am noticing is that my finance apps (example: banking apps, stock trading apps) popup an alert saying that my device is rooted (even though it is not) and this could be a security risk. The apps do still function but its a bit annoying to see this alert every time I launch the app.
Is this because the ROM has been signed with public keys? This alert does not appear when I used the iode OS ROM for Mi 9 or when I use the official Lineage OS for MicroG ROM on my Mi 8.
dmahtani said:
Thanks for making this ROM. Really appreciate it.
The only small issue I am noticing is that my finance apps (example: banking apps, stock trading apps) popup an alert saying that my device is rooted (even though it is not) and this could be a security risk. The apps do still function but its a bit annoying to see this alert every time I launch the app.
Is this because the ROM has been signed with public keys? This alert does not appear when I used the iode OS ROM for Mi 9 or when I use the official Lineage OS for MicroG ROM on my Mi 8.
Click to expand...
Click to collapse
I'm not sure. It could be the Signature Spoofing aspect. I don't think iode has that and I know stock LIneage does not.
Do you have Magisk installed?