Related
View attachment 4567426
What is Project Treble:
Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and running your phone. This way we can easily change the system image and be able to run our device on different system images with the same kernel and vendor partition
Read more about Project Treble
What's a GSI?:
A GSI literally means Generic System Image. It is a general system image meant for no specific device. Treble enabled devices have the capability to run a GSI. You can find a GSI here: Phh-Treble
ZTE Axon 7 hardware vs Treble implementation:
Our Axon 7 is an A-only device. This means that regarding the GSI images (GSI = Generic System Image) to be used, you need to get ARM64 and A-Only system images
What's Packaged in the zip:
A boot image (kernel)
A compressed vendor image (vendor)
Requirements:
- Unlock bootloader
- Installed patch EDL to add /vendor part. 800Mb
- Installed TWRP 3.2.1-8 - TREBLE
How to install:
- Format /system, /data and /cache, wipe /vendor
- Install Treble flashable zip package Project_Treble_v1.0-by-NFound
- Install GSI .img in /system part. How to flash a Generic System Image (GSI) on Project Treble supported devices
- Reboot
Alternative Instruction
Working:
Camera (and flashlight)
WiFi
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
Broken:
Encryption (format data or remove encryption when coming from a non-treble rom)
Sepolicy is still permissive
Nothing else? Otherwise please report it!
Download:
- TWRP 3.2.1-8 TREBLE
- AXON7_GPT_ADD_VENDOR_800MB
- Project_Treble_v1.1-Axon7-by-NFound
Available GSI images is here
Android Pie Release 1 and other (video proof on Axon 7)
Fixes:
- More fixes for Treble ROM by @Kranoner
Credits:
@djkuz for add part. /vendor
@NFound for the fact that this dude did this for us real
Contributors:
@NFound
OS Version based: 8.X Oreo
ROM Kernel: Linux 3.18.71
ROM Firmware Required: Official BETA B12 Oreo
Version Information
Status: Testing
Source-Code Vendor
Created 2018-08-08
Last Updated 2018-08-12
Reserved
Thank you very much @NFound, i will test this asap. Does the gapps need to be flashed after install?
Waancho said:
Thank you very much @NFound, i will test this asap. Does the gapps need to be flashed after install?
Click to expand...
Click to collapse
Any ARM64 with opengapps.org for 8.x, in GSI 9.x Gapps included
Dear friends! Do not forget to backup before installation, this is a test version. It's time for me to sleep, write. As time will be, I will read your comments. If you find bugs - be sure to specify the version of GSI Android 8.x or 9.x
Thank you!
Hey need fast answer! In this guide is talking about a Vendor 8.1 and 8.0 and 8.0 does not work with this rom, so my question is does this rom support your treble? https://forum.xda-developers.com/pr...development/aosp-9-0-android-9-0-gsi-t3826357
Source code vendor blobs in OP
NFound said:
Source code vendor blobs in OP
Click to expand...
Click to collapse
I am a bit confused: how would non-standard hardware like our famous DAC be used in a treble ROM? Would the vendor partition make specific APIs available for such non-standard hardware?
Thank you for this. Maybe its a stupid question, but does the DAC properly function even when we install a GSI?
I have a feeling that a proper fully functional treble will make the other custom ROM thread for Axon 7 obsolete.
so no EDL needed? I'm so happy because i dont have a windowscomputer.
*edit: i think i did not read good and windows is still needed
Zobat said:
so no EDL needed? I'm so happy because i dont have a windowscomputer.
*edit: i think i did not read good and windows is still needed
Click to expand...
Click to collapse
You dont need a windows-pc. Only twrp
Do we need to install the project treble zip in the OP if we already enabled treble by EDL?
Let me see if I got this whole treble situation straight :cyclops:
I'm running the latest AEX but I assume this guide contains a more updated "treble" so to speak, is that correct? In order to try the GSI's do I need to follow this guide and wipe everything or will the next AEX release update treble and contain the new fixes?
https://sourceforge.net/projects/resurrectionremix-oreo/files/arm64aonly/
Arm64 and A only. Should be working right?
BaamAlex said:
You dont need a windows-pc. Only twrp
Click to expand...
Click to collapse
He DOES need a windows pc since in order to enable treble he needs to flash a file via EDL
troy5890 said:
Do we need to install the project treble zip in the OP if we already enabled treble by EDL?
Click to expand...
Click to collapse
You will need to install this again Project_Treble_v1.0-by-NFound
it contains bug fixes
bornlivedie said:
He DOES need a windows pc since in order to enable treble he needs to flash a file via EDL
Click to expand...
Click to collapse
For this zip here he dont need a PC. For the EDL package yes.
Just wanted to thank you and talk about my experience.
Converting the device to Treble was a breeze. Can be done in under 5 minutes with no issues at all. I'm currently running Android P PR1 with no major problems.
However, when trying to install the GSI (totally not related to your work, but wanted to comment on this so everyone can enjoy treble) I ran into a small problem (error 7) when flashing the POST sGSI zip files. I resolved this by doing the following:
Install the treble zip
Install the GSI
Install the treble zip again
Install the 3 zip files in order
This worked out fine for me.
Again, thanks a million times on your epic feat. This is no small task, and is very welcome. It marks a before and an after.
You, sir, are heaven-sent. Thank you for your good work.
bornlivedie said:
Install the treble zip
Install the GSI
Install the treble zip again
Install the 3 zip files in order
Click to expand...
Click to collapse
Why a second time?
Dear friends!
In the video I am used Release 1.
1. Flash Project Treble
2. Flash GSI
3. !!! In Mounting - UNMOUNT and MOUNT system and vendor!
4. Install patches 1,2,3
5. Reboot
Android Pie Release 1 (Download A-only and patches): https://androidfilehost.com/?w=files&flid=280192
Work GCam: https://github.com/AospExtended/platform_vendor_aosp/blob/8.1.x/prebuilt/common/apk/Gcam.apk
NOTICE: If during a call on Android 9 you do not hear the subscriber. (thx @atakan33 )
PS Here is another list of available GSI ROMs, use the translator!
9.x https://4pda.ru/forum/index.php?act=findpost&pid=75394613&anchor=Spoil-75394613-2
8.x https://4pda.ru/forum/index.php?act=findpost&pid=75394613&anchor=Spoil-75394613-3
Thank you!
About
I've found information about flashing GSI's on this phone to be fragmented so here's a collection of resources that have worked for me.
If you have any suggestions or issues with popular GSI ROMs, drop them here and I'll do my best to update the thread.
Note: This guide is for users who have already flashed custom ROMs (not necessarily GSI) to their phone. If you're new to this or are coming from any MIUI ROM, please see other tutorials.
Click to expand...
Click to collapse
GSI Installation
1. Flash TWRP
The current latest version (as of the time of writing v3.3.0) supports for flashing GSIs.
2. Update firmware (optional)
I'm currently using the latest global firmware (as of time of writing v10.2.2.0) which seems to work fine. Download the zip from xiaomifirmwareupdater and flash in TWRP.
3. Flash treble BOOT and VENDOR partitions
Download the below image files (source).
boot.img
vendor.img
Install the images by using the following command or optionally using TWRP.
Code:
fastboot flash boot boot.img
fastboot flash vendor vendor.img
4. Flash your GSI ROM
Pick a GSI from the Treble forum and be sure to download an ARM64 and A-Only variant. If the downloaded file is an archive (not an *.img file) you will need to extract the contents.
Go into TWRP
Copy the GSI image to your phone
Wipe "Dalvic/ART Cache", "Cache", "System" and "Data" paritions
Install the GSI image to the System Partition (Install -> Install Image -> yourimagefile.img - System Image)
Reboot back into TWRP
Resize the system partition (Wipe -> Advanced Wipe -> check System -> partition options -> Resize FS)
Install Magisk & OpenGapps (both optional)
GSI ROMs
Pixel Experience 9 (2019-03-24)
Source: XDA
Status: Working.
Additional info: Everything works as expected.
AospExtended v6.2 (20190313)
Source: aospextended
Status: Working.
Additional info: Everything works as expected.
Ressurection Remix v7 (19/04/16)
Source: XDA
Status: Unusable.
Additional info: Everything works aside from video playback (which creates a loud popping/static sound regardless of audio levels).
Has someone tried oui ??
Great guide! Thanks a lot, your way was the only way I could get a treble rom working on the device! I wasn't able to flash the vendor in fastboot coming from miui 10.2.2.0, but it worked from twrp. Now got Havoc booted successfully
has anyone tried q gsi?
xeodm said:
has anyone tried q gsi?
Click to expand...
Click to collapse
If you want to use it, try it out. There's no reason it shouldn't work ?
Anyone successfully flashed Android Q beta 5 GSI?
I tried my best, but it is not booting up!
djmanri3 said:
Has someone tried oui ??
Click to expand...
Click to collapse
I'm going to try it later. I will update if it works.
djmanri3 said:
Has someone tried oui ??
Click to expand...
Click to collapse
Unfortunately, it doesn't boot. I want to try it too !
salahmed said:
Anyone successfully flashed Android Q beta 5 GSI?
I tried my best, but it is not booting up!
Click to expand...
Click to collapse
I remember someone saying u need to use permissiver 3 or 4
gsser said:
I remember someone saying u need to use permissiver 3 or 4
Click to expand...
Click to collapse
Do you have a link?
Regards
salahmed said:
Do you have a link?
Regards
Click to expand...
Click to collapse
I dont have any unfortunately, it might be in erfano's telegram group or mix 2 aosp group.
I'm Stuck Help!
I'm stuck on AOSP EX Boot Animation, What to do now?
I did all right!!
Why is this happening
Fix for the audio problem
andythedev said:
About
I've found information about flashing GSI's on this phone to be fragmented so here's a collection of resources that have worked for me.
If you have any suggestions or issues with popular GSI ROMs, drop them here and I'll do my best to update the thread.
GSI Installation
1. Flash TWRP
The current latest version (as of the time of writing v3.3.0) supports for flashing GSIs.
2. Update firmware (optional)
I'm currently using the latest global firmware (as of time of writing v10.2.2.0) which seems to work fine. Download the zip from xiaomifirmwareupdater and flash in TWRP.
3. Flash treble BOOT and VENDOR partitions
Download the below image files (source).
boot.img
vendor.img
Install the images by using the following command or optionally using TWRP.
Code:
fastboot flash boot boot.img
fastboot flash vendor vendor.img
4. Flash your GSI ROM
Pick a GSI from the Treble forum and be sure to download an ARM64 and A-Only variant. If the downloaded file is an archive (not an *.img file) you will need to extract the contents.
Go into TWRP
Copy the GSI image to your phone
Wipe "Dalvic/ART Cache", "Cache", "System" and "Data" paritions
Install the GSI image to the System Partition (Install -> Install Image -> yourimagefile.img - System Image)
Reboot back into TWRP
Resize the system partition (Wipe -> Advanced Wipe -> check System -> partition options -> Resize FS)
Install Magisk & OpenGapps (both optional)
GSI ROMs
Pixel Experience 9 (2019-03-24)
Source: XDA
Status: Working.
Additional info: Everything works as expected.
AospExtended v6.2 (20190313)
Source: aospextended
Status: Working.
Additional info: Everything works as expected.
Ressurection Remix v7 (19/04/16)
Source: XDA
Status: Unusable.
Additional info: Everything works aside from video playback (which creates a loud popping/static sound regardless of audio levels).
Click to expand...
Click to collapse
https://github.com/hmuny99/GsiSystemAudioFix
Use this flashable zip to fix the audio stuttering issue.
Someone tried it with the Q GSI's from Erfan? I can't get it to work....
pattagalix said:
Someone tried it with the Q GSI's from Erfan? I can't get it to work....
Click to expand...
Click to collapse
Not with Efran's gsi's but I've tried a few times on other 10's and had no luck on my end. I Used the 10 gsi Aonly 64 bit and I've formatted data and decrypted using Zach's force encrypt removal zip and magisk su zip and I've tried without removing encryption and no luck. It hangs on mi boot logo every time. I saw a DerpFest gsi on telegram that's when this whole gsi mission began for me. lol. Maybe we need a different boot.img and vendor.img for 10 idk? ? I tried with and without flashing the boot and vendor, decrypt and not decrypt and no go. ?
Sent from my moto g(7) power using XDA Labs
I booted RR v7.03 from Luke's GSI thread using vendor and boot in op but tried a few more 10 GSIs and they either hang on mi screen or bootloop forever. This RR is bad ass!! V7.03 wasn't made for Chiron and blows 7.02 off the map. Although security patch is from November 2019 I'm going to rock it a while. Sure will miss RR now that main dev stopped. Talk about a bad ass ROM!!! If anyone wants to use it its here. Just click the top link and you'll see the A only 64
https://forum.xda-developers.com/pr...iscussion/gsi-expressluke-built-gsis-t4003457
Update 1 error " FBI message warning (lol) about the firmware and error 7"
---->Back to firmware v9.5.30
download it and install first
https://osdn.net/projects/xiaomifir...clover_miui_MIPAD4_9.5.30_4d4a04e318_8.1.zip/
--------------------------------------------------------------------------------------------
Update-2 -!!!! Cause Mokee TWRP not support (new GSI with Phh- :v114 ) decryption then You can't encrypt.
Use this step for new GSI with phh v114
1. Mokee TWRP v.3.3.1 --->TWRP-20190528-3.3.1.0-clover.img
https://share.weiyun.com/5VfERAy or https://mega.nz/#!QPgiDI6J!Urr3Drlwe...lp6UmBEb1v16pQ
2. Before firstboot from flashing must install Disable DM Verity ForceEncrypt
( https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip)
Note After Mokee 9 Pie is updated to June 10th, the latest TWRP (TWRP-20190528-3.3.1.0-clover.img) cannot decrypt the data partition.
-----------------------------------------------------------------------------------------
Update-3
New installation.
0.Make F2FS Data Partition (Option)
1.Flash Firmware https://xiaomifirmwareupdater.com/#stable
2.Flash Vendor (mokee pie) https://mega.nz/#!JG4WxI7I!O4vr5eEcVXJUjbZ_jZBUE9Q9nDZ9tavRrT9JXDpql1Q
3.Flash System
4.Flash Disable DM Verity ( if you don't want encryption)
5.Reboot
-----------------------------------------------------------------------------------------
========================================================
Pre...
1. Download Latest Mokee TWRP 3.2.3_4 (not Twrp 3.3.1)
https://pan.baidu.com/s/1HgjIWw2WPd...rentPath=/sharelink3674761570-399175935519286
TWRP-20190117-3.2.3.0-4-clover.img
2. Download Base 9.x Treble supported ROM ( Mokee 9 nightly )
https://download.mokeedev.com/?device=clover
MK90.0-clover-2019-xx-xx-xxxx-NIGHTLY.zip
3. Download Android 9 Pie GSI ( system image file ) ----will make useful list later (after my finished testing)
General list here --- https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
How...
Base ROM supported ../Fingerprint /Forced Encryption / F2FS / Permissive mode SELinux
1. Clean Flash ROM (MK90.0-clover-2019-xx-xx-xxxx-NIGHTLY.zip)
do
1a [ Wipe--->Format Data ] + [ wipe---->Advanced wipe---->Dalvik/Data/Cache/System/Vendor ]
if not success please reboot into TWRP and try again.
1b reboot twrp
1c Flash Mokee ROM
Reboot system for setting up---->Note you can test any kernel supported in this step.
---------------Finished installation Treble Base ROM
2. Boot Recovery
2a wipe---->Advanced wipe---->Dalvik/Data/Cache/System/
2b change data partition to F2FS (if you want)----Option
2c install System.img GSI (ARM64_a only)
Reboot system
++ Gapps with Error 70
Solution-
1.Wipe---Advanced wipe----select (system menu) option-----Repair or change file system----Resize File System
2.Flash gapps again
++ Encrypted login
Setting---Fingerprint----setup (pattern /Password)
Note will effected with both Android and Twrp Login
-Remove Android Screen lock ----Twrp Login remove too
-Add Android Screen lock (Pattern/Password) ----Twrp Login add too
+++Magisk 19.3
-Recommended module
Viper4Android FX Legacy 4.3
Universal GMS Doze
SafetyPatch v3
...more
Picture my device " Unofficial Havoc 9x.GSI " quick charging
[9.0.0_r45/v115] download : https://androidfilehost.com/?a=show&w=files&flid=286761
Resurrection Remix v7.0 [GSI]
https://get.resurrectionremix.com/?dir=gsi
ARM64_A_20191205.img
Arrow OS (9x.GSI)
https://sourceforge.net/projects/arrow-os/files/arrow-9.x/GSI/
2019-04-18 extract file first ---- system_arm64_a.zip
Unofficial Omnirom (9x.GSI)
(05-06-2019 UPDATE)
https://forum.xda-developers.com/pr...abled-device-development/9-0-omnirom-t3901305
official Havoc 9x.GSI
https://forum.xda-developers.com/pr...bled-device-development/gsi-havoc-os-t3930030
##### Havoc-OS v2.7 Official Build #####
GSI Update 08-07-2019
Download ARM64-AONLY: https://bit.ly/2Xz2agy
Don't want F2FS data partition.
1.Flash Firmware
https://xiaomifirmwareupdater.com/#stable
2.Flash Vendor (mokee pie)
https://mega.nz/#!JG4WxI7I!O4vr5eEcVXJUjbZ_jZBUE9Q9nDZ9tavRrT9JXDpql1Q
3.Flash System
4.Flash Custom Boot Image (option)
5.Flash Magisk
6.Reboot
-forced encryption ( TWRP-20190117-3.2.3.0-4-clover.img support /data encrypt)
-No err from File App
-Setup your fingerprint
7.Flash Gapps
Pixel Dust PIE
https://forum.xda-developers.com/pr...evice-development/9-0-pixel-dust-pie-t3862484
system-arm64-aonly-20190326.img
Unofficial bootlegger 9x.GSI
https://forum.xda-developers.com/pr...d-device-development/9-0-bootleggers-t3919828
https://androidfilehost.com/?w=files&flid=292505
bootleggers-20190507-arm64-aonly-system.7z
unofficial LineageOS 16.0 GSI
https://sourceforge.net/projects/andyyan-gsi/files/
https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
!!!! Mokee TWRP not support (Phh- :v114 ) decryption.
[AOSP 9.0] Phh-Treble
Update
AOSP 9.0 v115
https://github.com/phhusson/treble_experimentations/releases/tag/v115
!!!! Mokee TWRP not support (Phh- :v114 ) decryption. (Important)
==================================================
New Descendant 3.0 GSI
https://forum.xda-developers.com/pr...om-rom-ver-t3840578/post79678283#post79678283
update
Phh-device tree version v115
https://github.com/Descendant/InOps...DotOne/Descendant_ThreeDotOne_arm64_aonly.zip
-----------------
My review
1.Base rom : MK90.0-clover-201906070721-NIGHTLY
2.Kernel: EAS_clover_kernel_V6.1
-------------------
Can't set wallpaper
...more
AOSPExtended Official GSI 9 Pie
https://sourceforge.net/projects/aospextended-rom/files/treble_gsi/pie_arm64_aonly/
update
AospExtended-v6.6-arm64_aonly-20190705-0000-OFFICIAL.zip
unofficial PixelExperienceP GSI
https://github.com/EnesSastim/Downloads/releases/
LiquidRemix
https://forum.xda-developers.com/pr...d-device-development/9-0-liquidremix-t3889160
ARM64-A-ONLY-NO GAPPS [2019-4-17 ]
https://drive.google.com/open?id=11e2RAumtcTZUyX8JBJLKgIn8H214Nmci
dear buddies
I wanted to flash some custom roms but I am facing a problem
unable to mount/wipe system , vendor
error occured in
twrp and orangefox
#help
same problem here
Taken from Pixel Experience Installation help page, we need to disable File Based Encryption (THE FBE ERROR ON TWRP), so they suggest this step. I will try it and post update here.
NOTE: If you have installed the stable Android 11 MIUI or you have installed the stable Android 11 MIUI vendor, you won’t need to flash again.
Download the correct stable Android 11 MIUI according to the version of your phone:
Redmi Note 9 Pro 5G
Xiaomi Mi 10i
Xiaomi Mi 10T Lite(Global)
Xiaomi Mi 10T Lite(Taiwan)
Xiaomi Mi 10T Lite(EEA)
If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
Sideload the .zip package:
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
check
TIP: If the process succeeds the output will stop at 47% and report adb: failed to read command: Success/No error.
Return to the main menu.
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition.
Update it worked, using pixel experience now
Black Plague said:
Taken from Pixel Experience Installation help page, we need to disable File Based Encryption (THE FBE ERROR ON TWRP), so they suggest this step. I will try it and post update here.
NOTE: If you have installed the stable Android 11 MIUI or you have installed the stable Android 11 MIUI vendor, you won’t need to flash again.
Download the correct stable Android 11 MIUI according to the version of your phone:
Redmi Note 9 Pro 5G
Xiaomi Mi 10i
Xiaomi Mi 10T Lite(Global)
Xiaomi Mi 10T Lite(Taiwan)
Xiaomi Mi 10T Lite(EEA)
If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
Sideload the .zip package:
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
check
TIP: If the process succeeds the output will stop at 47% and report adb: failed to read command: Success/No error.
Return to the main menu.
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition.
Update it worked, using pixel experience now
Click to expand...
Click to collapse
The updates we get from the settings menu are the same ones right? And do we have to switch region ROMs like EU, China etc..
Sparkplug3000 said:
The updates we get from the settings menu are the same ones right? And do we have to switch region ROMs like EU, China etc..
Click to expand...
Click to collapse
Use the ROM that is specific to your device. For example I have the Mi 10i from India and I'd download that specific ROM. Don't bother with EU or China ROMs if you do not intend to use them for a while.
Ham_is_here said:
Use the ROM that is specific to your device. For example I have the Mi 10i from India and I'd download that specific ROM. Don't bother with EU or China ROMs if you do not intend to use them for a while.
Click to expand...
Click to collapse
same here, I flashed for the 10i and am using dot os 5.1.3 (non root) Thank you for answering
KB971033Z29 said:
dear buddies
I wanted to flash some custom roms but I am facing a problem
unable to mount/wipe system , vendor
error occured in
twrp and orangefox
#help
Click to expand...
Click to collapse
#gauguin devices have a dynamic storage partition or A/B partition system. No need to wipe system & vendor to flash any rom. You can flash rom just by wiping cache, dalvik cache, data. That's will solve your problem.
But Magisk app says A-only... and so does Treble Check
Please
how to flash android 12 gsi on redmi note 10 its safe?
Thx
jepewsykes said:
Please
how to flash android 12 gsi on redmi note 10 its safe?
Thx
Click to expand...
Click to collapse
Since the latest release is Android 12 beta 2, there can be bugs. Once flashed, the device may or may not be useful as daily driver.
I guess android 12 beta 2 can be booted on the latest MIUI stock vendor and/or the OSS vendor(from arrowos) , but I am not sure.
After unzippng the GSI ROM, yuu can flash system.img using fastboot mode from a PC.
Cheers!
I just tried .. sadly it didn't boot for me
chazy chaz said:
I just tried .. sadly it didn't boot for me
Click to expand...
Click to collapse
What u vendor?
Im using vendor xiaomi.eu 12.5.1 now
jepewsykes said:
What u vendor?
Im using vendor xiaomi.eu 12.5.1 now
Click to expand...
Click to collapse
Im using global 12.5.1 and not booting
jepewsykes said:
Immm using vendor xiaomi.eu 12.5.1 now
Click to expand...
Click to collapse
chazy chaz said:
Im using global 12.5.1 and not booting
Click to expand...
Click to collapse
Mee too
lol i thought you managed to boot it .. is there anyone who can help us plz ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Redmi 4A Android 12 Beta
since i found no guide here
what is needed:
choose which vendor you would like
for example
install arrowos = oss vendor
install lineageos = miui vendor
--> minimal fastboot will not work!
download latest fastboot
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
instructions:
[In TWRP]
install rom
format data
reboot recovery
reboot fastboot
[In Windows cmd]
fastboot flash system system.img
fastboot erase userdata
reboot reboot recovery
[In TWRP]
format data
reboot system
after first boot:
open magisk app to install magisk
source for sgsi:
GSI Tutorials | Discussion
Discussion Group Of The GSI Tutorials Channel. Feel Free To Message And Enjoy Your Stay Here! Updates Channel: @GSITutorials Gsi Request: @GsiReqBot Read the Rules: http://t.me/MissRose_bot?start=rules_-1001383446243
t.me
[Bugs on lineageos vendor]
distorted sound and no fingerprint
--> can be fixed with volte_fix_sweet.zip, search for it on telegram group
[additional stuff]
Releases · kdrag0n/android12-extensions
Enable and customize hidden features on Android 12. - kdrag0n/android12-extensions
github.com
in developer options 120 hz can be enabled
sergejschmal said:
since i found no guide here
what is needed:
choose which vendor you would like
for example
install arrowos = oss vendor
install lineageos = miui vendor
--> minimal fastboot will not work!
download latest fastboot
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
instructions:
[In TWRP]
install rom
format data
reboot recovery
reboot fastboot
[In Windows cmd]
fastboot flash system system.img
fastboot erase userdata
reboot reboot recovery
[In TWRP]
format data
reboot system
after first boot:
open magisk app to install magisk
source for sgsi:
GSI Tutorials | Discussion
Discussion Group Of The GSI Tutorials Channel. Feel Free To Message And Enjoy Your Stay Here! Updates Channel: @GSITutorials Gsi Request: @GsiReqBot Read the Rules: http://t.me/MissRose_bot?start=rules_-1001383446243
t.me
[Bugs on lineageos vendor]
distorted sound and no fingerprint
--> can be fixed with volte_fix_sweet.zip, search for it on telegram group
[additional stuff]
Releases · kdrag0n/android12-extensions
Enable and customize hidden features on Android 12. - kdrag0n/android12-extensions
github.com
in developer options 120 hz can be enabled
Click to expand...
Click to collapse
Did you've installed 12?
How is it, buggy or nearly stable?
Beta 4 Pixel 5 File which was tested on redmi Note 7 was flawless after Volte and Fingerprint fix. I only did not find out how to pass safetynet, that's why I got back to lineageos
Laptapper said:
Did you've installed 12?
How is it, buggy or nearly stable?
Click to expand...
Click to collapse
sergejschmal said:
since i found no guide here
what is needed:
choose which vendor you would like
for example
install arrowos = oss vendor
install lineageos = miui vendor
--> minimal fastboot will not work!
download latest fastboot
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
instructions:
[In TWRP]
install rom
format data
reboot recovery
reboot fastboot
[In Windows cmd]
fastboot flash system system.img
fastboot erase userdata
reboot reboot recovery
[In TWRP]
format data
reboot system
after first boot:
open magisk app to install magisk
source for sgsi:
GSI Tutorials | Discussion
Discussion Group Of The GSI Tutorials Channel. Feel Free To Message And Enjoy Your Stay Here! Updates Channel: @GSITutorials Gsi Request: @GsiReqBot Read the Rules: http://t.me/MissRose_bot?start=rules_-1001383446243
t.me
[Bugs on lineageos vendor]
distorted sound and no fingerprint
--> can be fixed with volte_fix_sweet.zip, search for it on telegram group
[additional stuff]
Releases · kdrag0n/android12-extensions
Enable and customize hidden features on Android 12. - kdrag0n/android12-extensions
github.com
in developer options 120 hz can be enabled
Click to expand...
Click to collapse
How to fix this???
You can check type of your device Partition using this APP
For Devices with A only type Partition:-(TWRP must be installed for A type and A/B type devices)
1. Download A only type GSI (if available) (if not try with A/B Type GSI)
2. Download Android 11 Custom rom (device specific)(AICP Recommended)
3. Boot into TWRP
4. Wipe Dalvic, System, Data, Cache, Vendor, Internal storage(optional)
5. Move Android 11 Custom rom & GSI to internal storage of device
6. Flash Android 11 Custom rom
7. Flash MakeMeSAR zip ( only when using A/B type GSI)
8. Then flash GSI to "system image" partition
9. Reboot to system
if not booting then try with different Android 11 Custom rom (device specific)
*****if confused watch this video by clicking here ******
For Devices with A/B type Partitions:- (TWRP must be installed for A type and A/B type devices)
1. Download A/B type GSI
2. Download Android 11 Custom rom (device specific)(AICP Recommended)
3. Boot into TWRP
4. Wipe Dalvic, System, Data, Cache, Vendor, Internal storage(optional)
5. Move Android 11 Custom rom & GSI to internal storage of device
6. Flash Android 11 Custom rom
7. Change slot to opposite slot (If A change it to B) (If B change it to A)
8. Reboot to Recovery
9. Then flash GSI to "system image" partition
10. Reboot to system
if not booting then try with different Android 11 Custom rom (device specific)
*****if confused watch this video by clicking here ******
For Devices with Dynamic Partitions:- (Twrp not needed but must be on Android 11)
1. Enable developer options
2. click on option called DSU Loader and you will be given 2 options
3. Select what ever package you like to
4. Wait for installation
5. Reboot Option will be given via notification
6. Click Reboot
*****if confused watch this video by clicking here ******
Redmi 9 4/64 please, give me please link for Android 12 gsi (ported may be)