Hi..
Here i share some GSIs manual fixes for hi6250 (emui8) devices as many of them they missed huawei patches or ignored them.
To be honest most credits of the fixes go to our hi6250's active devs Haky , DarkJoker360 , Dil3mm4 & of course Phh.
The fixes made after many comparisons between stock, DSSIs & different GSIs builds & versions.
Gsi Installation:
1 - Wipe system data cache & dalvik
2 - Flash system_arm64_aonly.img in system image partition , boot up & look for bugs
3 - Flash the fix
Fixes could fixe bootloop , sdcards bug ( not detected ) , camera/torch toggle , offline charging , Real battery capacity ( 3000mah ) , GPS and automatic APN detect .
*More posts will be added as updates if any fix successfully tested
Well done, bro!
Keep it up :highfive:
Omar Champ said:
Well done, bro!
Keep it up :highfive:
Click to expand...
Click to collapse
Thanks :highfive:
Update : ( only dssi builds )
Possible fast charge fix for p10 lite users who are using dssi PRA ROMs by Haky or by DarkJoker360 following this way :
Using a root explorer go to /etc/init/init.6250.rc and edit values of tow lines :
From 2750 to 4500
write /sys/class/hw_power/charger/direct_charger/iin_thermal 2750
From 1000 to 2000 :
write /sys/class/hw_power/charger/charge_data/iin_thermal 1000
Save/exit/reboot
*Try lower values if fast charge speed seems faster than stock ( use ampere app to compare )
Thank you for sharing these awesome fixes.
I tested some of those on my p10 lite (South Korean single sim variant rebranded to Eurupean dual sim variant).
PixelExperienceP unofficial GSI was bootable after flashing your fix file and also get back offline charging by your fix.
As official PE Pie GSI is expected to be roll out after august, I hope those fixes would also work on that.
Recommend to try!
Update :
Fix vendor mismatch message every time when booting some dssi/gsi roms like Bootleggers and other roms .
Also this guide fixes CtsProfile=false ( magisk safetynet check ) .
GUIDE :
From magisk download section :
-Flash MagiskHide Props config module
-Flash BusyBox magisk module
-Reboot
Tape in termux ( or any terminal emulator )
Su
Props
According to the menus enter :
1 then f then 7 then 7 then y & y & reboot .
Hami_Do said:
Update :
For P8lite/P10lite and should work for other hi6250 devices .
Fix vendor mismatch message every time when booting some dssi/gsi roms like Bootleggers and other roms .
Also this guide fixes CtsProfile=false ( magisk safetynet check ) .
GUIDE :
From magisk download section :
-Flash MagiskHide Props config module
-Flash BusyBox magisk module
-Reboot
Tape in termux ( or any terminal emulator )
Su
Props
Then according to the menus enter :
1 then f then 7 then 7 then y & y & reboot .
Click to expand...
Click to collapse
In my case it ends up with phone locking like it's been restarted (I can't unlock it with fingerprint, have to enter PIN) after about 2 minutes of using. In my case universal SafetyPatch by hackintosh5 works flawless. Phone shows vendor missmatch warining anyway, but for example I was able to activate phone contactless paymants in my bank app.
Update :
HWComposer & blur Fix for GSIs.
So at the moment it's working only on GSI roms.
Here's how to fix blur and hwc:
-Flash the fix and reboot to Android.
-Disable, re-enable and disable again the HW Overlays ( in developer options ), boom blur gone.
Credits: - haky86
- Me for making it flashable & for testing
Update :
- Pie -
Fix NFC on GSIs :
- Go to system/app/NfcNci/ and delete the whole folder
- Flash NFC4PRA-GSI-TWRP.zip
Reboot
Good news !
Finally camera and flashlight fixed for quack gsi build ( android 10 ) :
- Flash the patch through twrp
- Reboot
Any plans or progress in fixing GPS for "quack" gsi?
MIcHiJK said:
Any plans or progress in fixing GPS for "quack" gsi?
Click to expand...
Click to collapse
Idk but it seems working as it should on v203
Hami_Do said:
Idk but it seems working as it should on v203
Click to expand...
Click to collapse
Oh I was on v202 and had problems. Google maps was just finding my location when WiFi was on. I want to use "Here we go" in offline mode but it wasn't working. There is nothing about GPS in changelog. From what EMUI 8 version are you coming. I flash treble ROMs from the February build.
MIcHiJK said:
Oh I was on v202 and had problems. Google maps was just finding my location when WiFi was on. I want to use "Here we go" in offline mode but it wasn't working. There is nothing about GPS in changelog. From what EMUI 8 version are you coming. I flash treble ROMs from the February build.
Click to expand...
Click to collapse
I'm on emui of October 2018
Discussions opened here @hi6250group
Update Q fixes:
How to fix safetynet issues on phh's Q + msg on booting "there is problem in your device ..." :
-Download UnSu.zip
-Download Termux (or use adb)
-Download magisk phh build ( tested with magisk.phh.v19.3 )
#####
-Place unSu.zip on SD card
-Flash magisk phh build
-In termux, enter:
su
(Grant permission on window)
for termux:
phh-su 0 /system/bin/phh-securize.sh
(Add adb shell if using adb)
-Reboot to twrp, mount /system.
-Go to advanced -> File manager : delete /system/app/bin/phh-su
-Factory reset with twrp.
-Flash magisk phh build, reboot.
#####
For now BasicIntegrity should be fixed (true) + android's msg on booting should gone
#####
-In magisk repository (download section), install magisk hide props and BusyBox
-Reboot
-Install termux (or use adb), and run:
su
props
1
f
7
7
y
Reboot.
#######
CtsProfile should be fixed (true)
#######
Enjoy !
Credits :
@PHHtreble @hi6250group's members
Anyway to get a functional NFC patch for PRA-LX1 on android Q GSI ?
cethiel said:
Anyway to get a functional NFC patch for PRA-LX1 on android Q GSI ?
Click to expand...
Click to collapse
Not tried yet , I will look later if I can fix it.
How to fix io schedy missing "none"
Hi.. How to fix this error?
It's show "none" inside scheduler tab selection
itsm03 said:
Hi.. How to fix this error?
It's show "none" inside scheduler tab selection
Click to expand...
Click to collapse
Sorry I don't know
Update Q fixes :
It seems media broken on all v204 based ROMs I have tested such as LOS 17 , MSM Extended Q ( no sound , no video )
I managed to fix it using the patch bellow , and if media not fixed just open terminal and tap :
su
setprop debug.stagefright.ccodec 0
Related
DO READ ALL CAREFULLY ! I MEAN ..... ALL…
When installing this zip you have to know it’ll make your intSD to be formatted when you want to revert to Nougat (see later on) . So do follow instructions carefully, otherwise do flash something else….don’t want to see some tears due to this one
So, thought I upload my twrp zip of A2017 V3.0.0B01 MiFavor 5.2 based on @wineds backup (thnx mate !). And make a FULL GUIDE for it !
As some of you wanted to test out this V3.0.0B01(version2) not through EDL but via a regular twrp zip, here you go !
Pros and Cons but did my best to make it as it is...
PRO :
*stock rom with Dolby
*almost fully debloated of Chinese adware
*working magisk 15.3 and safetynet
*working adaway
*magisk modules working fine
*no call bugs
*no hickups or stuttering UI
*scaling up to 0.25 – much faster UI experience
*axon7 G bootanimation
*FP scanner less then 1/2sec response time
*…
CONS :
*didn’t manage to make system r/w through root explorers ; you can however delete and add files - or use twrp - i guess you’ll have to live with that and test for yourselves
*reboot time lasts langer then normal
*quick-charging does work but does not display that on screen
*dialer phone call list may show some chinese characters next to "mobile", "work". It's a translation of it.
*…
Procedure : READ CAREFULLY !!!!!
0. Download/place files onto extSD (not intSD) formatted as Fat(32)/exFAT (otherwise your extSD might seem “corrupt” when booted – see also PNW) :
a. Twrp3.2.1.5
b. A2017X_V3.0.0B01_O_SL!M rom
c. A2017X_V3.0.0B01_bootstack twrp3.2.1.6 incl
d. Modem G or U
e. A2017X_universalB15_twrp3.2.1.0 included and/or your bootstack of your running rom at the moment
f. Magisk 15.3
1. Do make a full backup of your intSD ! ( on pc or extSD like you want ). You’ll loose your intSD when reverting back and needs formatting to EXT4. YOU ARE WARNED!
2. Install twrp3.2.1.0 (if not already running) !
3. Do make a full backup in twrp3.2.1.0 of your entire working rom (boot, modem, system, data)(if not already done)
4. Boot into twrp3.2.1.0 and flash twrp3.2.1.5(a), reboot in recovery AGAIN ( do not boot system)
5. Wipe system/data/cache/dalvik
6. Install (b) rom
7. Install (c) bootstack
8. Install (d) modem (G/U)
9. Flash magisk 15.3 (f)
10. Wipe cache/dalvik
11. Reboot
12. Tap power on “5sec” and “30sec” screen ( I know….the corrupt boot is awfull,,don't blame me...)
13. You’ll be powered off/red lights
14. Power for around 10sec and you’ll boot
15. Tap middle circle on bootpage, choose English, setup wifi,check in,…..
16. You’re on !
17. Uncheck auto update into Playstore !
18. Check safetynet magisk. Should be ok
19. Check adaway. Should be ok. If not : check “systemless hostst” under magisk/settings
20. Enjoy adless youtube
21. ….
You can add the new JoJoc module in magisk to juice up your battery-life :good:
Tip : disable left page (Mi-board) with long press on home screen/goto more/uncheck Mi-Board
REVERT PROCEDURE to Nougat : READ CAREFULLY !!!
1. Boot into twrp3.2.1.6
2. Flash twrp3.2.1.0 and reboot into recovery AGAIN (not into system !)
3. You will see you have to “cancel” and swype and you’ll have to format intSD again. But first look also if you see your old twrp backup you took earlier into the restore option
4. When so, go into wipe/advanced/wipe/choose data/change filesystem to EXT4
5. Then go into wipe : wipe system/data/cache/dalvik
6. Restore your old twrp backup
7. Flash universal B15 ! (for nougat)
8. Reboot
9. Red lights...but power again for some secs
10. You’ll boot
11. When booted, reenter twrp again and flash ( if needed ) your own bootstack again ( in my case on G I flashed the B09 bootstack (slim4) and in same flash also the B09-removeBLwarning )
12. Reboot and you’re on your old running rom now
INFO :
Stripped off :
Weather
Browser (ume)
Email
Google Video, Films…
Maps
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
….......
Baked into :
AdAway
Google Calender
Google Clock
Youtube Black themed addfree (latest)
...
Minor Modifications :
Zip aligned apk’s
Build.prop tweaks :
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@Didgeridoohan
@asderdd (edl rom + modems :good
@wineds (for his TWRP backup :good
@NFound (for his new twrp's :good
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V3.0.0B01 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=889964283620773067 thnx @asderdd
Kernel : stock
Version Information :
Status : Stable
Created : 2018-02-18
Uploaded : 2018-02-20
1. Add A2017X-LockNow feature : https://androidfilehost.com/?fid=818070582850494172
Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?
FunkyRasta said:
Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?
Click to expand...
Click to collapse
Thank You !
I could but in this release i didn't add to much. Can add a flashable zip though later on. We'll see :cyclops:
Thanks for your efforts.
Did you try open account on chrome?
WesTD said:
Thanks for your efforts.
Did you try open account on chrome?
Click to expand...
Click to collapse
Have installed chrome (use another one) and logged into my google account.
Asking why ?
raystef66 said:
Have installed chrome (use another one) and logged into my google account.
Asking why ?
Click to expand...
Click to collapse
It was broken on MF5.x. I'll download and try soon your ROM.
Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?
BaamAlex said:
Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?
Click to expand...
Click to collapse
It's all in procedure you know. And no you'll have to install 3.2.1.5. Later on, when bootstack is flashed you'll end up even on 3.2.1.6 to not corrupt your data EXT4 partition.
Anyway, read carefully and do all as described!!! This is not a regular flash
Is this the official oreo rom by zte? How is the performance compared to nougat?
ahalak said:
Is this the official oreo rom by zte? How is the performance compared to nougat?
Click to expand...
Click to collapse
Based on this. ZTE release beta V3.0.0B01 MiFavor 5..2
Performance is up to you to test. For me it has no lags only the ones mentioned in OP. When listening f.e. on youtube, imo sound quality is way above N.
Battery with Jojoc tweak is comparable to N.
Also less then 1/2sec for FP scanner. So no bug there as before.
Test it yourself and compare :good:
Why this version and not B07?
Did not boot on my U version. Waiting on animation for 15 minutes
Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!
WesTD said:
Did not boot on my U version. Waiting on animation for 15 minutes
Click to expand...
Click to collapse
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this
joaste said:
Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!
Click to expand...
Click to collapse
Thnx joaste!
FP for me is like said very fast even when doing it's nap
Yeah, V3B07 would be great (i worked on it before) but then again for now no dolby when rooted and vice versa afaik. Therefore i worked on this one.
For G version (not sure about U) , if you want to disable nav_bar, use my navbar df!nr
raystef66 said:
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this
Click to expand...
Click to collapse
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.
WesTD said:
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.
Click to expand...
Click to collapse
Did you see the A7 bootanimation ?
Did you try the patch that i wrote in previous post ?
Edit : anyone on U version installed succesfully ?
i'm stuck at the linux penguin on my G model, done everything as described in the op, no errors while flashing or anything, can't get past it
I have made a module, It adds 2 files in priv-app
MatchmakerPrebuilt (Action Services)
NexusLauncherPrebuilt (Pixel Launcher)
> For some reason , device refuses to boot in a specific kernel
> But works with stock kernel , I dont know what is causing the other kernel bootloop or sometimes dont boot.
> I fail to understand why this even happens
any insights would be nice , thanks !
ROM :- AOSP based PIE
Magisk :- Canary build ( 18.1)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Latest update MIUI-11 here https://forum.xda-developers.com/mi-pad-4-plus/how-to/miui-11-global-china-t3994147/page4 +
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++================
Warning:
Backup persist partition
(There are some project that changes your WIFI MAC Address. if it happened you will lost it forever.)
It shows wifi but after entering pwd it shows only saved. Can't connect at all.
-Boot TWRP
-connect your PC with USB
-your computer -Open CMD
cmd>adb shell
cmd>cd /dev/block/platform/soc/c0c4000.sdhci/by-name/
cmd>ls -l /dev/block/platform/soc/c0c4000.sdhci/by-name/
cmd>dd if=/dev/block/platform/soc/c0c4000.sdhci/by-name/persist of=/sdcard/persist.img
(keep your persist.img in the safe place)
--------------------------
How to restore it if you have a problem.
(load your persist.img into sdcard.)
cmd>dd if=/sdcard/persist.img of=/dev/block/mmcblk0p48
================================================================
+Update the best MIUI-11 Android 10/Q For MiPad4 Plus
------------------------------------------------------------------------------
++++++++++ A10 MIUI-11 China Beta ++++++++
------------------------------------------------------------------------------
+- Ported from Redmi Note 5 Pro (Redmi Note 5) using Erfan Tool by O Canal High Tech do VegaDados Bobo...
- MIUI 11 CN Beta 9.10.17
- Updated Security Patch: 2019-10-01
- More Debloated
+-install GApps ( ExliteGapps )
+-a little fix error
------------------------------------
Begin
1. Flash Vendor_for_CN_MIU-I11.zip https://mega.nz/#!9OZDFYxT!ZvU3Qlaw4E8oJFaItyi_IdsNRXCvPg7bksQSvtVpLWM
2. Flash System.img [MIUI11-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img]
Download here hurry up https://drive.google.com/file/d/1eqFbi4mou3UxcQkH86y2mcsis2qqdj9h/view
3. Flash "allzygotefix2.zip" https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
4. Flash Magisk latest stable version.
5. Reboot (the fist time boot --hello MIUI 11 CN
Not set wifi --No online during setup android.
6. Enable Developer mode set DPI ( Smallest width about 600 or any ...up to you )
-setup Fingerprint
-make Lock screen shot-cut on home-screen
-setting-->Home Screen Menu
set Swip up on the Home screen to = None
set App vault = Disable
-open wifi
-Flash Fix Treble Sound https://mega.nz/#!5DoHQIoA!vQStmoPfEFceOahuBjr4Wcz1S6espGsDA1NZFRQhLCQ
-New Fix System sound cracked " fixaudiogsi.zip"
https://mega.nz/#!cOZXGarJ!nneoUuB-gPqxBn5OQhFY-KdzIxa7L7Hd2S5niK2N8BE
------------
Make CN to EN
7. Install EdXposed
Magisk Manager install below mods
-Riru-Core (Magisk Mod)
-Riru-EdXposed YAHFA (Magisk Mod)
-EdXposedManager.apk
Edxposed Manager -- install below mod
-HiddenCore (com.cofface.ivader) ---xposed mod
-MIUI Anesthetist
More Debloated by yourself
8.Install Root Explorer (Root) or any you like
-Delete System Apps ( forbidden to delete such as..)
/System/app/MiuiSuperMarket
/System/app/Updater
Etc.
-----------------
Optional step for MicroG /NanoDroid User ( Later )
-----------------
9.Next step install Gapps
"ExLiteGApps-10.0_arm64-20191101_v2.3.zip"
https://sourceforge.net/projects/exlitegapps/files/Android 10/Plus-edition/
Note I use 2.3 version for now
Download and flash with TWRP
Reboot you will founded there are Gboard and Play store app already installed.
House keeping
---Fix sound bug .( by install Viper4A)
**How to install Viper4A with Android 10/Q
1.Download ROOTLESS DRIVER INSTALLER " v4afx-rootless_08.18.2019.zip" from here
https://zackptg5.com/android.php#viper
2.Flash " " v4afx-rootless_08.18.2019.zip"
3.Download archive ViPER4Android.rar extract to your phone storage
.Open and run v4a.apk from inside ViPER4Android folder.
4.open Magisk manager install Audio Modification library and restart
-If your launcher starts to flick on startup, flash that: Google Drive
(https://drive.google.com/file/d/1bWCEX4ri5LK1UwMHVxu6t9AJyLlTQ3wB/view?usp=sharing)
Just flash if launcher flicks on first boot
Fix error " Android System: your vendor image does not match the system......."
-edit (system/vendor----> bulid prop)
change line " ro.vendor.build.fingerprint = xxx to ro.build.fingerprint=xxx
and/or
-edit (system ---> bulid prop)
change " ro.treble.enabled=true" to " ro.treble.enabled=false"
- reboot
END
========================================
++++++++++ A9 MIUI-11 Stable +++++++++
========================================
All files
https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
Info.:
Android Version: 9
- Ported from
Brand: xiaomi
Model: Redmi 7
MIUI 11 Global Stable V11.0.3.0
Security Patch: 2019-10-01
Fingerprint: xiaomi/onc_eea/onc:9/PKQ1.181021.001/V11.0.3.0.PFLEUXM:user/release-keys
-Note
- To login into your Google Account, you need to install Google Play Services, after do that, reboot.
Download: Hurry up it will delete soon
https://drive.google.com/file/d/18O4k8RWAcp_NX1HhUnGl1hvalzrtsMYg/view?usp=sharing
TWRP : TWRP-20191001-3.3.1.0-clover.img = https://mega.nz/#!NTYgnYpR!SghroCrXa9BhT89P3SzOefdBjnSmW2EZ2-gBSTaikqo
Step
1. Flash vendor (_vendor_miui11.zip)
2. Flash System Img (MIUI11-Aonly-VegaDataTests-9-20191025-ErfanGSI.img)
3. Flash permissiver _v4
4. Flash Disable Force Encryption Treble + Magisk
5. Reboot ( Take more times to boot )
6. install google services apk
7. Fix All Sound------------
-Flash Fix Treble Sound https://mega.nz/#!5DoHQIoA!vQStmoPfE...GsDA1NZFRQhLCQ
-New Fix System sound cracked " fixaudiogsi.zip"
https://mega.nz/#!cOZXGarJ!nneoUuB-g...7Hd2S5niK2N8BE
[Xiaomi.EU's MIUI 11 (Android Q/10) GSI]
--------------------------------------------------
- Ported from Redmi K20
- MIUI 11 BETA ver. 9.10.17
- Android 10
-- Updated Security Patch: 2019-10-01
- Xiaomi.EU include GAPPS, so, to use Google Play and these things, you need to install Google Play Services
-Download -ARM64 Aonly https://drive.google.com/file/d/19q6lPqGbyDaRdtzhN_dHsDdOkWcXiST8/view?usp=sharing
Step https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
1. Flash vendor ( _vendor-MIUI.EU.zip )
2. Flash System.img ( MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img )
3. Flash allzygotefix2.zip
-flash magisk
4. Reboot --(Take more time to boot at redmi logo)
5. install google services (gms)
6.reboot
7.login google account
8.Fix sound error ( install Viper4A)
9.Enable Developer mode adjust DPI go back to setting set ICon size
===============
----Supported GCam 7
----Tips:
- If you get some visual bugs, try to enable "Disable HW overlays" in Developer Mode
----Work function
DT2C/W
Face unlock
Fingerprint unlock
Full screen display
power boot menu
etc... you will test it
===================================
Very important
You will founded error sound, please install viper4A. ( howto down below)
**How to install Viper4A with Android 10/Q
1.Download ROOTLESS DRIVER INSTALLER " v4afx-rootless_08.18.2019.zip" from here
https://zackptg5.com/android.php#viper
2.Flash " " v4afx-rootless_08.18.2019.zip"
3.Download archive ViPER4Android.rar extract to your phone storage
.Open and run v4a.apk from inside ViPER4Android folder.
4.open Magisk manager install Audio Modification library and restart
5.Fix Sound bug
-Flash Fix Treble Sound https://mega.nz/#!5DoHQIoA!vQStmoPfE...GsDA1NZFRQhLCQ
-New Fix System sound cracked " fixaudiogsi.zip"
https://mega.nz/#!cOZXGarJ!nneoUuB-g...7Hd2S5niK2N8BE
https://sourceforge.net/projects/zjrdroid/files/GSIs/
Remark
ZJRDroid GSIs Updates, [31.10.19 22:51]
Hello everyone, it is with great sadness that I inform you that I am pausing all my work with GSIs, because currently I have no time to GSIs. We will continue to have GSIs, but infrequently.
Thank you for understand. @ZJRDroid
tom.android said:
[Xiaomi.EU's MIUI 11 (Android Q/10) GSI] *****recommend
- Ported from Redmi K20
- MIUI 11 BETA ver. 9.10.17
- Android 10
-- Updated Security Patch: 2019-10-01
- Xiaomi.EU include GAPPS, so, to use Google Play and these things, you need to install Google Play Services
-Download -ARM64 Aonly https://drive.google.com/file/d/19q6lPqGbyDaRdtzhN_dHsDdOkWcXiST8/view?usp=sharing
Step https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
1. Flash vendor ( _vendor-MIUI.EU.zip )
2. Flash System.img ( MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img )
3. Flash allzygotefix2.zip
4. Reboot
5. install google services (gms)
===============
Very important
You will founded error sound, please install viper4A. ( from Magisk' repo --ViPER4Android_FX_Legacy-v4.4.zip) only its driver that we want cause v4a not support Android 10
----Supported GCam 7
----Tips:
- If you get some visual bugs, try to enable "Disable HW overlays" in Developer Mode
----Work function
DT2C/W
Face unlock
Fingerprint unlock
Click to expand...
Click to collapse
Tablet ended in Bootloop with this
Everlite92 said:
Tablet ended in Bootloop with this
Click to expand...
Click to collapse
1.First thing first please install TWRP-20191001-3.3.1.0-clover.img = https://mega.nz/#!sHoXlaDK!ZIfuRrtl7...diEd-6iQS2YFNg
2.Clean Flash Wipe Advanced ( Davik + cache + data + system + vendor) and Format Data
( Not forgotten to backup your data before )
3.Reboot back to recovery do step to install gsi
Note --- Test with my Mi pad 4 Plus only
tom.android said:
1.First thing first please install TWRP-20191001-3.3.1.0-clover.img = https://mega.nz/#!sHoXlaDK!ZIfuRrtl7...diEd-6iQS2YFNg
2.Clean Flash Wipe Advanced ( Davik + cache + data + system + vendor) and Format Data
( Not forgotten to backup your data before )
3.Reboot back to recovery do step to install gsi
Note --- Test with my Mi pad 4 Plus only
Click to expand...
Click to collapse
Did everything, still bootloops =(
Everlite92 said:
Did everything, still bootloops =(
Click to expand...
Click to collapse
ok please wait I will extract current boot.img,vendor.img from my pad4plus. use twrp flash my boot.img and vendor.img then flash system MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img don't forget to flash allzygotefix2.zip
https://mega.nz/#F!oTZzBKTB!sugkCk_ov7gcfdOuJeGV6g
Android 9 GSI boots up fine, only 10 doesnt want to
---------- Post added at 06:37 AM ---------- Previous post was at 06:15 AM ----------
tom.android said:
ok please wait I will extract current boot.img,vendor.img from my pad4plus. use twrp flash my boot.img and vendor.img then flash system MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img don't forget to flash allzygotefix2.zip
https://mega.nz/#F!oTZzBKTB!sugkCk_ov7gcfdOuJeGV6g
Click to expand...
Click to collapse
Bootscreen is completly black. normal?
Everlite92 said:
Android 9 GSI boots up fine, only 10 doesnt want to
---------- Post added at 06:37 AM ---------- Previous post was at 06:15 AM ----------
Bootscreen is completly black. normal?
Click to expand...
Click to collapse
no firstboot mi logo then Redmi logo wait (take more time)
tom.android said:
no firstboot mi logo then Redmi logo wait (take more time)
Click to expand...
Click to collapse
Mi Logo appears, but no redmi logo. stays black. will wait longer but for now nothing happens
i hear the windows sound that a device is plugged in but no redmi logo.
Boot in mi pad 4 8"
Brightness no work and imei error id
Great work
Enviado desde mi ZTE A2017X mediante Tapatalk
davidroid1 said:
Boot in mi pad 4 8"
Brightness no work and imei error id
Great work
Enviado desde mi ZTE A2017X mediante Tapatalk
Click to expand...
Click to collapse
try Brightness Fix (mount vendor befor flash)
https://mega.nz/#F!5fBlFYxD!830A7OTeXkVX0jSZ-TfRXw
the twrp mega link is broken... (wrong c/p) "..." in link
here a working link:
TWRP-20191001-3.3.1.0-clover_mokee.img
Everlite92 said:
Mi Logo appears, but no redmi logo. stays black. will wait longer but for now nothing happens
i hear the windows sound that a device is plugged in but no redmi logo.
Click to expand...
Click to collapse
for me too. just a black screen and the windows sounds comes...
(with boot.img and vendor.img)
Mi Logo appears, then black screen, after some time windows sound, that a device was pluggin in
Windows Device Manager Shows: Qualcomm HS-USB Diagnostics 900E
deepblue2000 said:
for me too. just a black screen and the windows sounds comes...
(with boot.img and vendor.img)
Mi Logo appears, then black screen, after some time windows sound, that a device was pluggin in
Windows Device Manager Shows: Qualcomm HS-USB Diagnostics 900E
Click to expand...
Click to collapse
The new GSI's here with Android 10 are ending in blackscreen too. Only Android 9 Miui GSI Seems to work. LOS 17 GSI runs great. Don't get it....
I got it working now... but I have to think about it how I did it...
- first do not install the vendor.img which has @tom.android posted seperated
- I just installed the boot.img
So that the RedMi Logo shows up... there was a reboot loop... I let it as it is.. it rebooted many many times
In the meantime, I built a bathroom cabinet ... then I took a look at the MiPad4Plus, and there was no
reboot loop anymore, but it stuck at the Redmi Logo...
Then I rebooted twrp again, flashed again the rom.img and let it boot... and boot does work now..
but I cant activated cause, the wifi menu was missing, the back to twrp and installed allzygotefix2.zip again.
now wifi works and I could activate it...
deepblue2000 said:
I got it working now... but I have to think about it how I did it...
- first do not install the vendor.img which has @tom.android posted seperated
- I just installed the boot.img
So that the RedMi Logo shows up... there was a reboot loop... I let it as it is.. it rebooted many many times
In the meantime, I built a bathroom cabinet ... then I took a look at the MiPad4Plus, and there was no
reboot loop anymore, but it stuck at the Redmi Logo...
Then I rebooted twrp again, flashed again the rom.img and let it boot... and boot does work now..
but I cant activated cause, the wifi menu was missing, the back to twrp and installed allzygotefix2.zip again.
now wifi works and I could activate it...
Click to expand...
Click to collapse
So you wiped everything (vendor cache etc.) and then only flashed the boot img without vendor? could you describe every step you did?
yes I did wipe everything,
but I think you can follow the first steps how to install it from tom.android.
keep it in bootloop with the redme logo and go something to drink for 30-50minutes...
I think there are no other steps needed (seperated boot and vendor image from tom.android)
I will try it tomorrow again, to get a proof that it is working as tom.android wrote it.
but Chrome is freezing/lagging alot... and the homescreen does not rotate anymore.
deepblue2000 said:
yes I did wipe everything,
but I think you can follow the first steps how to install it from tom.android.
keep it in bootloop with the redme logo and go something to drink for 30-50minutes...
I think there are no other steps needed (seperated boot and vendor image from tom.android)
I will try it tomorrow again, to get a proof that it is working as tom.android wrote it.
but Chrome is freezing/lagging alot... and the homescreen does not rotate anymore.
Click to expand...
Click to collapse
i didnt mange to get to the redmi Logo. Mi Logo, blackscreen Reboot, Mi Logo Blackscreen. stays black.
the Redmi Logo shows up, if you follow the steps from Page 1 ..
but do not flash the vendor.img
edit:
I wanted to do it again, to understand what I did, so I wiped everything and formated data again
but now it works from the beginning.
Edit: chrome still freezes/crashes, but Edge works perfect
Edit: Bluetooth does not work, always crashing and brightness does not work
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.0 (11 is available but 12 has no difference in terms of issues and is faster an the better ui and everything else of course)
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:- bluetooth ear/headphones do not work workaround- ( go into phh treble settings misc features and enable force-disable a2dp offload (thanks to @Lil_Boudy for figuring it out!)
If bluetooth crashes your system disable media recommendations under Sound & Vibration > Media > Show media recommendations
mtp not working (mtp does work in twrp and in some custom kernels the one linked here does not fix mtp as it is not changing too many things compared to other custom kernels which brick some phones)
sim 1 incoming and outgoing does not work (you can revieve calls and call but you wonth hear anything nor will your mic go trying to fix) (workaround is to put your sim into slot 2) (i have heard that other people dont have this issue so i guess try your luck)
DO NOT let the phone die of battery you will not be able to boot and it will be hard to get back into the system (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
Kernel A71 Download
Source (Kernel Source)
download (magisk)
Rom download.
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
5 flash faizauthar12's kernel (this makes android feel smoother and makes the wake and sleep time instant!)
5.45 install magisk (the one linked above only) (optional but you should as a lot of modules are listed here are very important (ie the acc module and the fast charging module)
5.5.Reboot and enjoy!
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp 3.6.0 and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
Gcam: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/f/dl61/
apply this config https://www.celsoazevedo.com/files/android/p/f/2021/11/BSG-A71-GV1h.xml
and this LIB https://f.celsoazevedo.com/file/cfiles/gcm1/morgenmanlibv6.so
also enable extra cameras in phh treble settings - samsung settings for ultrawide
Get fast charging
by default a71 on pe charges really slow this enables fast charging for the a71 on pixel experience
to install download from https://drive.google.com/file/d/1KguCeLD-VHShm0MYzKhYrsAv-rZAuJeA/view?usp=sharing
Now install the module it will ask you to use volume keys follow the insturctions and choose 4500mah 27w once installed reboot! now enjoy faster charging (note: this will not affect battery/ will barely affect battery )
Increase performance without any battery impact or (by feravolt and gloeysik)
Step 1
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
install gms doze magisk module
GitHub - gloeyisk/universal-gms-doze: Patches Google Play services app and its background processes to be able using battery optimization
Patches Google Play services app and its background processes to be able using battery optimization - GitHub - gloeyisk/universal-gms-doze: Patches Google Play services app and its background proce...
github.com
install cloudflaredns4magisk
[MODULE] CloudflareDNS4Magisk
Hello, As John Graham-Cumming announced, Cloudflare now offers its own DNS service. And surprise of the Boss if we believe his words: your history of browsing isn't saved on their servers ! :cowboy: DNS ?? Gne ?? What's this ? To make it...
forum.xda-developers.com
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
also enable extra cameras in phh treble settings - samsung settings for ultrawide
install universal safteynet fix zygsik to get safteynet working
ALL credit goes to phusson , ponces and rest of the devs
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
@Zainullahk1234 Please check your PM inbox. Thank you.
-Regards: Badger50 FSM
Lien HS Kernel A71 Download
samg2 said:
Lien HS
Click to expand...
Click to collapse
?
thats literally the one i linked
samg2 said:
Lien HS Kernel A71 Download
Click to expand...
Click to collapse
samg2 said:
Lien HS Kernel A71 Download
Click to expand...
Click to collapse
Zainullahk1234 said:
thats literally the one i linked
Click to expand...
Click to collapse
The link to the kernel DL was broken, which is why I fixed it.
Cheers: Badger50
is fingerprint working now?
franc1290 said:
is fingerprint working now?
Click to expand...
Click to collapse
yes
fod is now working perfectly!
Zainullahk1234 said:
the next release should come out in 5-15
Click to expand...
Click to collapse
thanks, but how im supposed to apply the config given in the thread and the LIB?
franc1290 said:
thanks, but how im supposed to apply the config given in the thread and the LIB?
Click to expand...
Click to collapse
double tap the empty area next to the selfie button
for the lib there google it
franc1290 said:
thanks, but how im supposed to apply the config given in the thread and the LIB?
Click to expand...
Click to collapse
new release
with fingerprint support!
Zainullahk1234 said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.0 (11 is available but 12 has no difference in terms of issues and is faster an the better ui and everything else of course)
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:- bluetooth ear/headphones do not work workaround- ( go into phh treble settings misc features and enable force-disable a2dp offload ) (thanks to @Lil_Boudy for figuring it out!)
mtp not working (mtp does work in twrp and in some custom kernels the one linked here does not fix mtp as it is not changing too many things compared to other custom kernels which brick some phones)
sim 1 incoming and outgoing does not work (you can revieve calls and call but you wonth hear anything nor will your mic go trying to fix) (workaround is to put your sim into slot 2) (i have heard that other people dont have this issue so i guess try your luck)
(magisk is broken on a12 gsis dont flash it for now)
You tell me
Links
Kernel A71 Download
Source (Kernel Source)
Rom download.
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file
5 flash faizauthar12's kernel (this makes android feel smoother and makes the wake and sleep time instant!)
5.5.Reboot and enjoy!
Gcam: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/f/dl61/
apply this config https://www.celsoazevedo.com/files/android/p/f/2021/11/BSG-A71-GV1h.xml
and this LIB https://f.celsoazevedo.com/file/cfiles/gcm1/morgenmanlibv6.so
also enable extra cameras in phh treble settings - samsung settings for ultrawide
ALL credit goes to phusson , ponces and rest of the devs
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
Click to expand...
Click to collapse
New release
Fixed fingerprint for a71
and lots more
franc1290 said:
is fingerprint working now?
Click to expand...
Click to collapse
yes
Zainullahk1234 said:
yes
Click to expand...
Click to collapse
Alright thanks
Do you know if magisk canary version work with this GSI?
franc1290 said:
Do you know if magisk canary version work with this GSI?
Click to expand...
Click to collapse
no right now magisk canary is very buggy lots of devices cant boot from it
Trying this in sometime. How's the battery life btw?
Also, what can I use for root if magisk is not working?
i installed it but i got bootloop, in twrp i installed it to super partition and after i installed the kernel, then i restarted
I'm trying to get it installed but i'm getting "No OS installed" after flashing the img as super.
karan5chaos said:
Trying this in sometime. How's the battery life btw?
Also, what can I use for root if magisk is not working?
Click to expand...
Click to collapse
right now nothing magisk will work soon tho (hopefully)
battery is way better than oneui
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.0 (11 is available but 12 has no difference in terms of issues and is faster an the better ui and everything else of course)
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
(NOTE: do not apply the fixes if a bug does not affect you)
BUGS:- bluetooth ear/headphones do not work workaround- ( go into phh treble settings misc features and enable force-disable a2dp offload (thanks to @Lil_Boudy for figuring it out!)
If bluetooth crashes your system disable media recommendations under Sound & Vibration > Media > Show media recommendations
mtp not working (mtp does work in twrp and in some custom kernels the one linked here does not fix mtp as it is not changing too many things compared to other custom kernels which brick some phones)
sim 1 incoming and outgoing does not work (you can revieve calls and call but you wonth hear anything nor will your mic go trying to fix) (workaround is to put your sim into slot 2) (i have heard that other people dont have this issue so i guess try your luck)
DO NOT let the phone die of battery you will not be able to boot you can get back by holding volume down and power (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
Source (Kernel Source)
https://github.com/topjohnwu/Magisk/files/7819803/app-debug.zip (magisk)
Rom download.
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
5 flash physwizz kernel
physwizz a21s kernel version 1.5
Based on a217f Version 2 is here https://forum.xda-developers.com/t/physwizz-a21s-kernel-version-1-5.4359957/page-3#post-86991813 For OneUI 3.1 v1.5 (May also work for GSIs) Samsung securities disabled More CPU governors Conservative...
forum.xda-developers.com
5.45 install magisk (the one linked above only) (optional but you should as a lot of modules are listed here are very important (ie the acc module and the fast charging module)
5.5.Reboot and enjoy!
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp 3.6.0 and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
Install gcam go (or gcam if you get it working)
also enable extra cameras in phh treble settings - samsung settings for ultrawide
Increase performance without any battery impact or (by feravolt and gloeysik)
Step 1
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
Optimized and adjusted Google Play services. Contribute to gloeyisk/universal-gms-doze development by creating an account on GitHub.
github.com
install cloudflaredns4magisk (install both ipv4 and ipv6 versions) (this will switch you to cloudflares faster and more secur dns
Cloudflare dns magisk download
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
(you get better battery and performance in adaway)
also enable extra cameras in phh treble settings - samsung settings for ultrawide
install universal safteynet fix zygsik (magisk)to get safteynet working
enable denylist for apps you want to hide root from (dont enable it for google play services as it is not needed)
ALL credit goes to phusson , ponces and rest of the devs
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
can i install this rom being in the U8 binary? SM-A217M
What about the Galaxy A21 without the S? That's what it says on my device. Would it work or is it a different model?
iLoveANDROlD said:
What about the Galaxy A21 without the S? That's what it says on my device. Would it work or is it a different model?
Click to expand...
Click to collapse
it will work
but i havent tested performance yet so it may not be fast
I'm having a problem that says I don't have available storage (even i have 50gb free), I can't download anything, any help?
I'm having a problem with the lock screen, every time I put a password and restart the phone and try to unlock it, it automatically says the password is wrong and locks the phone for more than 8000 seconds... you know how to fix it?
so our phone does not support installing firmware from tvrp? And so why does the manual describe the installation method via TWRP?
parizi57 said:
I'm having a problem with the lock screen, every time I put a password and restart the phone and try to unlock it, it automatically says the password is wrong and locks the phone for more than 8000 seconds... you know how to fix it?
Click to expand...
Click to collapse
i have this proplem too !!
on any rom and gsi and stock rom
any soulotion !?
Mouad2007 said:
i have this proplem too !!
on any rom and gsi and stock rom
any soulotion !?
Click to expand...
Click to collapse
I didn't find any way to fix it, I'm using the stock rom that I don't have this problem
parizi57 said:
I'm having a problem with the lock screen, every time I put a password and restart the phone and try to unlock it, it automatically says the password is wrong and locks the phone for more than 8000 seconds... you know how to fix it?
Click to expand...
Click to collapse
did you find any soulotion bro !! plz help me
parizi57 said:
I didn't find any way to fix it, I'm using the stock rom that I don't have this problem
Click to expand...
Click to collapse
Which binary you have !! u7 ???
Zainullahk1234 said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.0 (11 is available but 12 has no difference in terms of issues and is faster an the better ui and everything else of course)
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
(NOTE: do not apply the fixes if a bug does not affect you)
BUGS:- bluetooth ear/headphones do not work workaround- ( go into phh treble settings misc features and enable force-disable a2dp offload (thanks to @Lil_Boudy for figuring it out!)
If bluetooth crashes your system disable media recommendations under Sound & Vibration > Media > Show media recommendations
mtp not working (mtp does work in twrp and in some custom kernels the one linked here does not fix mtp as it is not changing too many things compared to other custom kernels which brick some phones)
sim 1 incoming and outgoing does not work (you can revieve calls and call but you wonth hear anything nor will your mic go trying to fix) (workaround is to put your sim into slot 2) (i have heard that other people dont have this issue so i guess try your luck)
DO NOT let the phone die of battery you will not be able to boot you can get back by holding volume down and power (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
Source (Kernel Source)
https://github.com/topjohnwu/Magisk/files/7819803/app-debug.zip (magisk)
Rom download.
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
5 flash physwizz kernel
physwizz a21s kernel version 1.5
Based on a217f Version 2 is here https://forum.xda-developers.com/t/physwizz-a21s-kernel-version-1-5.4359957/page-3#post-86991813 For OneUI 3.1 v1.5 (May also work for GSIs) Samsung securities disabled More CPU governors Conservative...
forum.xda-developers.com
5.45 install magisk (the one linked above only) (optional but you should as a lot of modules are listed here are very important (ie the acc module and the fast charging module)
5.5.Reboot and enjoy!
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp 3.6.0 and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
Install gcam go (or gcam if you get it working)
also enable extra cameras in phh treble settings - samsung settings for ultrawide
Increase performance without any battery impact or (by feravolt and gloeysik)
Step 1
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
Optimized and adjusted Google Play services. Contribute to gloeyisk/universal-gms-doze development by creating an account on GitHub.
github.com
install cloudflaredns4magisk (install both ipv4 and ipv6 versions) (this will switch you to cloudflares faster and more secur dns
Cloudflare dns magisk download
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
(you get better battery and performance in adaway)
also enable extra cameras in phh treble settings - samsung settings for ultrawide
install universal safteynet fix zygsik (magisk)to get safteynet working
enable denylist for apps you want to hide root from (dont enable it for google play services as it is not needed)
ALL credit goes to phusson , ponces and rest of the devs
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
Click to expand...
Click to collapse
I have a problem with my samsung a21s
When I put the pin code, pattern, fingerprint or face.. then reboot.. a message says: Try again after 1440 minutes... Can you help me.. I will be very grateful
that is no one said:
I have a problem with my samsung a21s
When I put the pin code, pattern, fingerprint or face.. then reboot.. a message says: Try again after 1440 minutes... Can you help me.. I will be very grateful
Click to expand...
Click to collapse
hmm remove pin code and try again dunno why it does this
I thought we couldn't put twrp on our phones. Was a fix found?
Does it work on U8 Tho ? and A217F ?
Hello, I have a problem. It requires a screen lock with face unlock on every option, but my frontal camera is not working and it won't let me get past setup. Is it fixable?
7MODE__TN said:
Does it work on U8 Tho ? and A217F ?
Click to expand...
Click to collapse
I was able to flash it on my A217F U8. the only thing is that it won't let me go past the setup because it requires face unlock because my frontal camera doesn't work
EDIT: I was able to get over it.
I am getting random lag spikes, when this happens, I boot up ADB Shell and "top" shows 800% CPU while system_server is at the top, without using a lot of CPU... Is this supposed to be expected on this ROM? I can't seem to see it mentioned on bugs.
How do I even flash when there is no TWRP FOR it :[