I was wondering if we have root for nougat? How do i root my device? Thanks!
http://forum.turkdevs.com/konu-general-mobile-4g-android-7-0-nougat-root-yapma.html check topic.
the forum is in turkish, can you please share how in english here? Thanks
To get root I flashed SuperSu which can be flashed via TWRP recovery only. There are 2 kinds of SuperSu: Systemless (installed as a normal apk in data folder) and System SuperSu (installed in system/app folder). Check this thread if you understan russian.
Otherwise just do the following steps:
1. Install ADB and Fastboot drivers
2. Enable "Android debugging" in developer options
download TWRP recovery
3. Open the commandpromt window and install TWRP using the following commands:
adb reboot bootloader
fastboot devices (just to check the phone status)
fastboot oem unlock-go (all you data will be gone, so make a backup in advance)
fastboot0 erase recovery
fastboot flash recovery recovery.img (where recovery.img is TWRP file name)
4. Unplug the phone and remove battery. Place it back, press "Volume Up" и "Power" buttons.
5. Flash the desired SuperSu via TWRP.
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
https://www.youtube.com/watch?v=NSs08O6uGVI&t=324s
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Thank's it's work fine on custom gsi too, i just flash patch boot, vbmeta, finally install magisk success
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Can I just do this on MIUI 11.0.5 Global?
Omborkar said:
Can I just do this on MIUI 11.0.5 Global?
Click to expand...
Click to collapse
Download patched boot.img for ur rom instead of 11.0.7 boot.img I uploaded. Or patch it yourself.
I have a problem. Everytime I do the wipe it says only: "Failed to mount "vendor"(invalid argument)"
What to do?
Google play not certified... after flashing and installed magisk... Got solution??? Thanks
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
vincecabalan said:
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
Click to expand...
Click to collapse
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Hello, what files do I need to rename to boot.img and recovery.img? I'm lost
3. Rename the patched boot file to boot.img
4. Rename the custom recovery to recovery.img
RsAbubokor4 said:
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Click to expand...
Click to collapse
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
vincecabalan said:
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
Click to expand...
Click to collapse
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
speed_cars said:
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
Click to expand...
Click to collapse
try this process after flash zip of the last magisk from reset factory
Can i do this on miui 11.0.3.0 indian rom based on Android 10. If yes then i need recovery.img pls help.
4. Rename custom recovery file to recovery.img
- where i can download this?, or this is the outcome of step 1?
Everything works fine, exept password. When i set new password, let's say it is 1234, i set the password in the setting, then i press the power button for lock screen, i put the password in as usual, but it just says try again over and over, im pretty sure that it is not my fault. Thanks for reply.
Anyone have patched boot 11.0.4?
jurubebaamarga said:
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Click to expand...
Click to collapse
I wish to obtain root / access to magisk,
Wanting to know if I can do this without losing data (having to delete system data)
Thank you
Hello.
So I was trying to root my Redmi 7A - v10.2.1 with TWRP 3.3.1 but now I am stuck in a bootloop.
What I did:
1. Flash boot.img
2. Flash recovery.img
3. Flash vbmeta.img
4. reboot
Phone rebooted to system and TWRP was installed.
Then I booted to TWRP to install Magisk-v23.0.zip,
I went to Advanced Wipe, then wiped 'Dalvik / ART cache', 'System', 'Data', 'Cache'.
When I rebooted, it went into a bootloop, when I go to TWRP it says 'No OS INSTALLED".
What did I do wrong? And how to recover?
Thanks.
Cinox said:
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Click to expand...
Click to collapse
Im also getting the same error,, but what do you mean by "deselected the System partition". I see "system_root" in Mount but not "System"