Database Develop

Instructions on how to flash lg gt540 with android 2.1

This is a guide on how to flash lg gt540 with android 2.1 open europe edition (there are also uk and orange roms) with integrated fastboot.
Things you'll need:
rom with fastboot:http://forum.xda-developers.com/showthread.php?t=828003
lg gt540 hacker :http://forum.xda-developers.com/showthread.php?t=812308
(actually you only need KDZ_FW_UPD program , but the original program is in russian the program inside lg gt540 hacker is translated into english)
if you want quarx 2.1 black edition then
quarx system.img:http://rghost.ru/2898235
Step 1: Preparing pc
Download and install android sdk
install lg driver:http://www.megaupload.com/?d=INEH3FZS
Note if you aren't using the installer you might wanna copy adb.exe , adbwinapi.dll and fastboot.exe to system32 and register them as paths
Step 2 repare the phone
This step is the easiest just go to applications\development settings and turn on debugging mode
Then backup the data on the phone and you're done
Step 3: FLASHING!
!!!WARNING!!!!
BY FOLLOWING THESE INSTRUCTIONS YOU'LL VOID YOUR WARRANTY. ALSO THERE IS A HUGE RISK OF BRICKING YOUR PHONE BEYOND REPAIR . I'M NOT RESPONSIBLE FOR ANY KIND OF DAMAGE YOU DO TO YOUR PHONE BY FOLLOWING MY INSTRUCTIONS.THE FACT THAT THEY WORKED FOR ME DOESN'T MEAN THAT THEY WILL WORK FOR YOU.
Download and extract the rom of your choice from the link above.
Download and extract lg hacker (note lg hacker is not made by me so the credits for it don't go to me)
open start.bat and choose number 6 rom updater.
follow the instructions the program gives you if you don't have mxml sp3 parser
install it .
After the updater starts make sure that windows enabler is runing in the tray
open it if not (it's inside the lg hack folder in rom updater folder)
then click on the tray icon and it should say on click on it again if not.
THIS IS IMPORTANT CHANGE TYPE TO 3GQCT.
ALSO IMPORTANT BEFORE FLASHING DISABLE LGE ANDROID USB MODEM DEVICE IN DEVICE MANAGER
click browse and browse to your rom and select it
wait and hope it works.
click Launch software update .
Wait and hope it works
After flashing is done disconnect and restore your backup
If you want quarx black edition
1. reboot in fastboot (CAMERA+POWER)
2. put adbwinapi.dll , fastboot.exe and system.img in one folder
3. open cmd window in that folder and type : fastboot.exe -w
fastboot.exe erase system
fastboot.exe flash system system.img
fastboot.exe reboot
CONGRATULATIONS
IF YOU FOLLOWED ALL THE STEPS CORRECTLY YOU SHOULD NOW HAVE A PHONE WITH QUARX 2.1 BLACK EDITION CUSTOM ROM ON IT CAPABLE OF
OVERCLOCKING AND UNDERCLOCKING AND OTHER THINGS
if you didn't follow correctly and you bricked your phone don't panic
just repeat step3 and change diag mode in kdz flasher to cs emergency.
i hope this helps

Yeah... eh... thanks?!
Dont see any sence of this thread

grazie... from italia.

I know that there exist other instructions like this but those instructions didn't work for me so i posted the one that did
Sent from my GT540 using XDA App

Probelm
I bricked my phone when i was make a mistake downgraiding from 2.1 to 1.6.
Now the phone shows me only download mode (LG GT540).
I try to update firmare again and it shows me that and nothing goes on.
[R&D Test Tools Log File]
12:28:33 : Launching SW update
12:28:33 : Unpacking KDZ
12:28:36 : KDZ file extraced
12:28:38 : Files were extracted.
12:28:38 : LGMobileDL Load.
12:28:38 : Port = -1
12:28:38 : Connecting to phone
12:28:48 : Check Phone mode = 1
12:29:07 : Phone type check.......
12:29:11 : LGMobileDL.DLL Loading....
12:29:11 : _SetAuthMark Fail
12:29:11 : AuthMark°ˇ Á¤Č®Č÷ Phoneżˇ Write µÇÁö ľĘľŇ˝Ŕ´Ď´Ů!
12:29:11 : _SetAuthMark Fail
12:29:11 : LoadCDMAPhoneData() Error
12:29:11 : _DetachDLL Call
12:29:11 : _DetachDLL Call End
12:29:11 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20b-BAL-XXX-SEP-13-2010.dz
12:29:11 : Param : moduleDir =
12:29:11 : Param : waitTime = 0
12:29:11 : Param : UsbHighSpeed = 1
12:29:11 : Param : PhoneMode = 1
12:29:11 : Param : BinVersion = V20B_00
12:29:11 : Param : AuthMark = 0
12:29:11 : Call fn_StartUpgrade
12:29:21 : Smart : wParam = 3, lParam = 0
12:29:21 : Smart : wParam = 205, lParam = 0

Problem
I bricked my phone when i was make a mistake downgraiding from 2.1 to 1.6.
Now the phone shows me only download mode (LG GT540).
I try to update firmare again and it shows me that and nothing goes on.
[R&D Test Tools Log File]
12:28:33 : Launching SW update
12:28:33 : Unpacking KDZ
12:28:36 : KDZ file extraced
12:28:38 : Files were extracted.
12:28:38 : LGMobileDL Load.
12:28:38 : Port = -1
12:28:38 : Connecting to phone
12:28:48 : Check Phone mode = 1
12:29:07 : Phone type check.......
12:29:11 : LGMobileDL.DLL Loading....
12:29:11 : _SetAuthMark Fail
12:29:11 : AuthMark°ˇ Á¤Č®Č÷ Phoneżˇ Write µÇÁö ľĘľŇ˝Ŕ´Ď´Ů!
12:29:11 : _SetAuthMark Fail
12:29:11 : LoadCDMAPhoneData() Error
12:29:11 : _DetachDLL Call
12:29:11 : _DetachDLL Call End
12:29:11 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20b-BAL-XXX-SEP-13-2010.dz
12:29:11 : Param : moduleDir =
12:29:11 : Param : waitTime = 0
12:29:11 : Param : UsbHighSpeed = 1
12:29:11 : Param : PhoneMode = 1
12:29:11 : Param : BinVersion = V20B_00
12:29:11 : Param : AuthMark = 0
12:29:11 : Call fn_StartUpgrade
12:29:21 : Smart : wParam = 3, lParam = 0
12:29:21 : Smart : wParam = 205, lParam = 0

Just some questions:
"After flashing is done disconnect and restore your backup"
How do i restore my backup? And why should i?
"2. put adbwinapi.dll , fastboot.exe and system.img in one folder"
Where can i find adbwinapi.dll ?

dewide said:
"After flashing is done disconnect and restore your backup"
How do i restore my backup? And why should i?
Click to expand...
Click to collapse
For installed apps + usersettings. If u want to reinstall all apps and set them up again, u dont need to backup.
Best apps for this are "titanium backup" or "mybackup".

Okey, thank you!
Followed the rest of the guide and everything works perfect
Thank you! <3

Likewise, everything went well for me just now, thanks for the guide.

It worked perfectly fine for me too. My phone showed the "Emergency" Screen a couple of times, did some reboots and the whole process took quite a few minutes, but I just left it and now it has 2.1 on it.
THANKS AGAIN!

Heaiii Dude Thank you so much This was my First Flash And it Worked Perfect But i go For Open swift 2.2.1 now Sorry But i Need Danish and MoreLocale Does not work :c

oookey can i use this tutorial when my phone is 2.1 and its not custom rom i installed with lg updater so its not modded in any ways besides its rooted

1. reboot in fastboot (CAMERA+POWER)
2. put adbwinapi.dll , fastboot.exe and system.img in one folder
3. open cmd window in that folder and type : fastboot.exe -w
fastboot.exe erase system
fastboot.exe flash system system.img
fastboot.exe reboot
i need help with this bit..
can anyone please tell me how to open a cmd window in that folder..
or tell me a more detailed steps to put blacksystem on
thanks

[Q] plz help my p970 ...Brick!

My phone was rooted by gingerbreak v1.2 and I used titanium back up to delete some apps. I have deleted some important system apps so I restart my p970.
It just gives me a Lg logo and not works. I followed the instructions and used the
B2CAppSetup to reover my phone. I use my 32bit computer and 64bit laptop to recover......but it's doesn't work!!
I think I should enter the recovery mode and download an offical rom ? right?
Can anyone tell me how to fix it?
The main problem is that I don't know what's the first step....I don't know how to enter the recovery mode!!
Thx a lot ...my friends

Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english

my phone is driving me crazy, cant downgrade
mgregor said:
Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english [/QUOTE
hi, i already flashed my phone once with all the procedures you mention but somehow i bricked it while changing the theme on the boot menu so i had to do an emergency flash on it and somehow now i cant seem to downgrade it again. it always fails and gives me this message.
14:42:59 : A verificar a ligação com o telefone móvel...
14:42:59 : dwWaitResetTime(40000 ms)
14:43:00 : Phone Mode(2)
14:43:00 : *****GetPhoneType Start*****
14:43:00 : Phone Type : OMAP_IFX
14:44:00 : *****GetPhoneBinaryVersion Start*****
14:44:00 : *****Get ESN / IMEI / MEID Start*****
14:44:00 : ESN/IMEI/MEID : 356772041604012
14:44:01 : Phone type Compare start
14:44:01 : *****CheckPCSyncPrograms Start*****
14:44:02 : PCSyncPrograms Not Found - OK and ready to upgrade
14:44:03 : ****************CheckAndDownload****************** **
14:44:03 : ******Extract Start C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
14:44:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:03 : File Size = 239985437
14:44:10 : Extract kdz file Success.
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb\n
14:44:14 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb )
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
14:44:14 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.d ll)
14:44:14 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
14:44:14 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dl l)
14:44:14 : Extract End C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.cab
14:44:15 : ------------------Model.dll Information-------------------
14:44:15 : Filename : LGP970.dll
14:44:15 : Version : 1.0.0.2
14:44:15 : File size : 262144
14:44:15 : File date : 2011/04/05-23:43:32
14:44:15 : PC Created date: 2011/09/16-14:44:14
14:44:15 : ----------------------------------------------------------
14:44:15 : *****Check LGCM Programs Start*****
14:44:15 : LGCM Programs Not Found - OK and ready to upgrade
14:44:16 : *****WorkModelDLL Start*****
14:44:19 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone \V10A.wdb)
14:44:19 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:19 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LG P970.dll)
14:44:19 : _DetachDLL Call
14:44:19 : _DetachDLL Call End
14:44:19 : Call fn_StartUpgrade
14:44:19 : Type = OMAP_IFX
14:44:19 : ********* 2Chip Model.dll input Parameter*************
14:44:19 : MODEL_EVENT : 32769
14:44:19 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb
14:44:19 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
14:44:19 : BootWaitTime : 49500
14:44:19 : UsbHighSpeed : FALSE
14:44:19 : PhoneMode : 2
14:44:19 : NewPhoneBinVersion : VDP_VODAFONE(PORTUGAL).LGP970.V10A_00
14:44:19 : ClearSI : FALSE
14:44:19 : AuthMark : 0
14:44:19 : ********* 2Chip Model.dll input Parameter End*************
14:44:24 : wParam : 2004, lParam = 7
14:44:25 : Step : TYPE_WPARAM_IFX_DN_POS
14:44:25 : wParam : 2007, lParam = 0
14:44:26 : Step : TYPE_WPARAM_READ_FILES
14:44:26 : wParam : 2010, lParam = 3002
14:44:26 : CleanModelDll() : Free Model.dll
14:44:26 : _DetachDLL Call
14:44:26 : _DetachDLL Call End
14:44:26 : Page_Error ºÎºÐÀÔ´Ï´Ù
14:44:26 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
thank you very much for your help so far and in the future too...
Click to expand...
Click to collapse

skylinegt77 said:
C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
Click to expand...
Click to collapse
Rename those long file name to V10A_00.kdz

try to download rom with 10c european it did the trick for me and my LG is back alive .
Since my black aways had 10c since the beginning. So find the good ROM with match the version you originally had in your tel.
I can't post a link here so i have to find it your self
cheers !!!

You should try THIS.

I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance

vamshikrushna said:
I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance
Click to expand...
Click to collapse
Hello , I have the same problem. did u find any solution
My LG OPTIMUS Black is tuck at LG LOGO. actually it all came after i installed xionia recovery. After rebooting, it never goes forward, always stuck at LG LOGO. I tried LG mobile update recovery, Flashzip tools using APbin and CP Binfiles, also tred with KDZ files.. but all in vain. Can any body help me please. I am really nervous. thanks in advance

problems flashing back to stock rom from CM7

After flashing CM7 nightly and moving back to stock I can flash stock rom only once
What i mean is when trying 2nd time to flash stock rom from stock rom with R&D tool kit it gets stuck and doesnt finish off
So i can flash to stock say 10c coming from CM7 nightly
butn when im on 10c if i want to flash to 10D or any other version it just doesnt complete process of flashing and stays at previous rom
Dont know what im missing maybe any help would be appreciated thanks

So as a mater of facts the problem is not after flashing back from CM 7 but from flashing from stock to stock changing the name of the thread it will get a better reply on your issue.
And as an answer to your question... hard to answer I suppose that you did all the steps with clear cache clear data etc.
A better description of the steps you do when you encounter the issue will bring you a better answer.
Regards,
Me

Have you tried factory resetting it?

Laier94 said:
Have you tried factory resetting it?
Click to expand...
Click to collapse
Cleared cache dalvick reset data done everything
It never used to do this will try and get copy of log when trying to flash 2nd time
Just aswell this is my 2nd phone

here is the message i get , weird iv flashed phoned several times before using r&d method with no probs before
12:06:37 : [C:\LGMobileUpgrade] Try to delete folder
12:06:37 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
12:06:37 : Start Date : 2011-12-21 12:06:37
12:06:37 : ---------- QM CSE Testmode ---------
12:06:37 : ---------- CSE mode ---------
12:06:37 : ***** Check Tool Version *****
12:06:37 : Tool version : 1.5.4.4
12:06:37 : UpgradeDLL version : 1.2.6.5
12:06:37 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
12:06:37 : LGE USB Driver Version : 4.9.7.0
12:06:37 : Android PDLV Version : 2.2
12:06:37 : Android NDLV Version :
12:06:37 : ******************************************
12:06:37 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
12:06:37 : SetEmerModeAT()
12:06:37 : *****CheckOS Start********
12:06:37 : Microsoft_Windows7_Professional_
12:06:37 : *****CheckPCSyncPrograms Start*****
12:06:38 : PCSyncPrograms Not Found - OK and ready to upgrade
12:06:38 : Checking the connection with the cell phone...
12:06:38 : dwWaitResetTime(40000 ms)
12:06:39 : _IsConnectedPhone Call
12:07:00 : _IsConnectedPhone(2)
12:07:00 : 0 - NotConnected.
12:07:00 : 1 - Normal connect success
12:07:00 : 2 - Emergency connect success
12:07:00 : Phone Mode(2)
12:07:01 : *****CheckPCSyncPrograms Start*****
12:07:02 : PCSyncPrograms Not Found - OK and ready to upgrade
12:07:03 : ****************CheckAndDownload********************
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.kdz*****
12:07:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:03 : File Size = 240079641
12:07:05 : Extract kdz file Success.
12:07:06 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb\n
12:07:06 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb)
12:07:07 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
12:07:07 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll)
12:07:07 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:07 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:07 : Extract End C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.cab
12:07:07 : ------------------Model.dll Information-------------------
12:07:07 : Filename : LGP970.dll
12:07:07 : Version : 1.0.0.2
12:07:07 : File size : 262144
12:07:07 : File date : 2011/04/05-23:43:32
12:07:07 : PC Created date: 2011/12/21-12:07:06
12:07:07 : ----------------------------------------------------------
12:07:07 : *****Check LGCM Programs Start*****
12:07:07 : LGCM Programs Not Found - OK and ready to upgrade
12:07:08 : *****WorkModelDLL Start*****
12:07:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:10 : _DetachDLL Call
12:07:10 : _DetachDLL Call End
12:07:10 : Call fn_StartUpgrade
12:07:10 : Phone mode change -> CSE
12:07:10 : ********* CDMA Model.dll input Parameter *************
12:07:10 : MODEL_EVENT : 32769
12:07:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb
12:07:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
12:07:10 : BootWaitTime : 49500
12:07:10 : UsbHighSpeed : FALSE
12:07:10 : PhoneMode : 4
12:07:10 : NewPhoneBinVersion : EUROPE.OPEN.LGP970.V10E_00
12:07:10 : ClearSI : FALSE
12:07:10 : AuthMark : 0
12:07:10 : ********* CDMA Model.dll input Parameter End*************
12:07:15 : wParam : 2004, lParam = 7
12:07:15 : MODEL DLL Event : (2004, 7)
12:07:16 : Model Dll Msg Not Found(2004, 7)
12:07:16 : wParam : 2007, lParam = 0
12:07:16 : MODEL DLL Event : (2007, 0)
12:07:17 : Model Dll Msg Not Found(2007, 0)
12:07:17 : wParam : 2010, lParam = 3002
12:07:17 : MODEL DLL Event : (2010, 3002)
12:07:17 : Model Dll Msg Not Found(2010, 3002)

Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.

JasonQMe said:
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
Click to expand...
Click to collapse
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now

maniAK- said:
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
Click to expand...
Click to collapse
So basically,the the kdz file you flashed with earlier wasn't working,so you downloaded a new kdz file,flashed it with the new one,and it worked? Simple as that?

Keep only "V10E_00.kdz" as firmware name.
Sent from my LG-P970

12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00 .kdz*****
Click to expand...
Click to collapse
rgabi is right

Been flashing Samsung Galaxy S1 and 2 for so long now little bit different from this phone , feel like such a noob now and thanks for pointing it out

plz help me

Windows Phone Flashing Started
AMSS File Found:
RM823_12w30_1_prod_generic_amss.esco
ADSP File Found:
RM823_12w30_1_prod_generic_adsp.esco
WPOS File Found:
RM823_12301_prod_238_02_boot.esco
MDM AMSS File Found:
RM823_12w30_1_prod_generic_mdm_amss.esco
MDM DSP1 File Found:
RM823_12w30_1_prod_generic_mdm_dsp1.esco
MDM DSP2 File Found:
RM823_12w30_1_prod_generic_mdm_dsp2.esco
USER AREA ERASE File Found:
RM823_12w30_1_prod_generic_user_area_erase.esco
WARNING: OSBL File is not Loaded
================================================== ====
Windows Phone Lumia Flasher
================================================== ====
If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port
If the Phone is DEAD
1. Press and Hold the VOLUME UP button
2. Connect it to the USB Port while still Pressing
the VOLUME UP button
3. Continue to Press the VOLUME UP button for 8 more
seconds
================================================== ====
Sending AMSS Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 449 Bytes
Status : WRITE AMSS CERTIFICATE SUCCESS
Sending AMSS Data Blocks
(Please Wait for 25 Seconds...)
Status : AMSS WRITE SUCCESS
Sending ADSP Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 449 Bytes
Status : WRITE ADSP CERTIFICATE SUCCESS
Sending ADSP Data Blocks
(Please Wait for 25 Seconds...)
Status : ADSP WRITE SUCCESS
Sending MDM AMSS Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 447 Bytes
Status : WRITE MDM AMSS CERTIFICATE SUCCESS
Sending MDM AMSS Data Blocks
(Please Wait for 25 Seconds...)
Status : MDM AMSS WRITE SUCCESS
Sending MDM DSP1 Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 447 Bytes
Status : WRITE MDM DSP1 CERTIFICATE SUCCESS
Sending MDM DSP1 Data Blocks
(Please Wait for 25 Seconds...)
Status : MDM DSP1 WRITE SUCCESS
Sending MDM DSP2 Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 447 Bytes
Status : WRITE MDM DSP2 CERTIFICATE SUCCESS
Sending MDM DSP2 Data Blocks
(Please Wait for 100 Seconds...)
Status : MDM DSP2 WRITE SUCCESS
Sending WPOS Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 1652 Bytes
Status : WRITE WPOS CERTIFICATE SUCCESS
Sending WPOS Data Blocks
[BLOCK 1 0x00000000~0x00FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : C8D9F6A1AF69045EC0339C2EFFC2527D
---------- : D1CAECCFCFC39F1F44C67A5AD3F6C050
Status : WPOS WRITE SUCCESS
[BLOCK 2 0x01000000~0x016573FF]
Data Size: 0x00657400 Bytes
SHA-256 : 98D712C48E828E9816D3F7E84CFDE5DB
---------- : 2C32011C24D4615234D0F613F4EF7B52
Status : WPOS WRITE SUCCESS
[BLOCK 3 0x01697400~0x01FFFFFF]
Data Size: 0x00968C00 Bytes
SHA-256 : 80EB94E3FB5AE03E9091361275A3138E
---------- : 2D0370E5C2A497C74BEA6BEAA43A9E21
Status : WPOS WRITE SUCCESS
[BLOCK 4 0x02000000~0x02FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 07BE87B2AF4D1386F4C6CA136F3E5A57
---------- : 71DC6DDB330A07AAB4493C8AA329BB58
Status : WPOS WRITE SUCCESS
[BLOCK 5 0x03000000~0x03FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 2A3DE5C7CB693B00E257A4E7FB03E834
---------- : 11FAA597F94B220E69E25BD4653BE9B5
Status : WPOS WRITE SUCCESS
[BLOCK 6 0x04000000~0x04FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 16A3B764DD2CCBE5D144B504A919A847
---------- : 2F5DDCBBE2506ACEF6A39800E4DC5124
Status : WPOS WRITE SUCCESS
[BLOCK 7 0x05000000~0x05FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 4A508131A19FC499F19529C55D5D69B8
---------- : D85FA016F8CADE240FA88FA175159699
Status : WPOS WRITE SUCCESS
[BLOCK 8 0x06000000~0x06FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 9E494B017FB7E00D9245C8AEF0F01467
---------- : F3A10341E7441CBEBDE04399AFDD8C5E
Status : WPOS WRITE SUCCESS
[BLOCK 9 0x07000000~0x07FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 2AA1C1C01BA5F8825796F134753C7651
---------- : ABAC4C024CF30CE60B624C4E6C8CD665
Status : WPOS WRITE SUCCESS
[BLOCK 10 0x08000000~0x08FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 6F6EA7A66C4AE1A05CF643378A07E1A8
---------- : 523B29D66201C2FBD4053B19E785DE14
Status : WPOS WRITE SUCCESS
[BLOCK 11 0x09000000~0x09FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 017C4DB9A69575E684BADB7515DBBF59
---------- : 67A6F0DA20F034470D6148B12A1013F4
Status : WPOS WRITE SUCCESS
[BLOCK 12 0x0A000000~0x0AFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 1EFE884A458C910A768D6A60FF74BA8B
---------- : 58F546EB92737ACD1A59169E583CD407
Status : WPOS WRITE SUCCESS
[BLOCK 13 0x0B000000~0x0BFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 713CF0944BA46C6820DCEB7A210C365A
---------- : 7F8A1B0C3E168DE07B46E14907F511FC
Status : WPOS WRITE SUCCESS
[BLOCK 14 0x0C000000~0x0CFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 425A9ED14D4A78F21CDD261AB87F2CF1
---------- : 37080DD8E63F6A9BBBC4E9181AF7B9D2
Status : WPOS WRITE SUCCESS
[BLOCK 15 0x0D000000~0x0DFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 0C09DA5584E22D2709C548F2E5CD05F5
---------- : CFB62CE93C7DAF202A4B92299072B4FB
Status : WPOS WRITE SUCCESS
[BLOCK 16 0x0E000000~0x0EFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : CC14545EF5F62DA50EFADEC5E077FA15
---------- : FE6723E61D703468E0F2B88A3A77008E
Status : WPOS WRITE SUCCESS
[BLOCK 17 0x0F000000~0x0FFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 75D352196D46AC4FED27B84844D89D27
---------- : A8E6C4BD07D46537FA1D66BC533BF017
Status : WPOS WRITE SUCCESS
[BLOCK 18 0x10000000~0x10FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : D6847541FEB0C828C7BE18F045FD2602
---------- : D31D627E75BAA24AD9EBE13E111DCD96
Status : WPOS WRITE SUCCESS
[BLOCK 19 0x11000000~0x11FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 3512321DD2C8349BF40BF6ACD45B82A8
---------- : 970E7902252853F1C75FD6DA3B07416C
Status : WPOS WRITE SUCCESS
[BLOCK 20 0x12000000~0x12FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 970B38B361801866AEB1F9D0E2A6E5FB
---------- : 28066FD1BCF0EF794B57E56439B29152
Status : WPOS WRITE SUCCESS
[BLOCK 21 0x13000000~0x13FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : C8E0BAEDBCFC0A13A125FF17A9DDDA0E
---------- : 91AC3DD74B6E738F3AD53D269F12CFFD
Status : WPOS WRITE SUCCESS
[BLOCK 22 0x14000000~0x14FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : D786A1406E5AF5D0B5354003197BCE87
---------- : F34053A66DF8375001E2DB59D528B21D
Status : WPOS WRITE SUCCESS
[BLOCK 23 0x15000000~0x15FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 47A2B984B6D9C39AF4131C9ED8DB949A
---------- : 82CBC84E0019ECB0E1BABB61E0F47790
Status : WPOS WRITE SUCCESS
[BLOCK 24 0x16000000~0x16FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : D4CEA61B44087F662387735C6AF3F626
---------- : D0A782BCFC893D7CD19A1895A2503AE8
Status : WPOS WRITE SUCCESS
[BLOCK 25 0x17000000~0x17FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 93D0DB4DA824CE4660B96A99A1F65989
---------- : CA45F500E83FC9A53D1D8330B150A80E
Status : WPOS WRITE SUCCESS
[BLOCK 26 0x18000000~0x184A17FF]
Data Size: 0x004A1800 Bytes
SHA-256 : 0CE0CCDE41E4E40B170207CABCE6AA18
---------- : 8FD44C00E21833E6B5926A1F0CDFA40A
Status : WPOS WRITE SUCCESS
Sending USER AREA ERASE Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 396 Bytes
Status : WRITE ERASE CERTIFICATE SUCCESS
Erasing USER AREA
Status : ERASE SUCCESS
Flashing Done!
Total Flashing Time (Erase + Flashing) : 00:06:17
plz i have one the same problem.
it was work good only whatsapp app was not working
after i flashed it hang on nokia logo

otchere said:
Windows Phone Flashing Started
AMSS File Found:
RM823_12w30_1_prod_generic_amss.esco
ADSP File Found:
RM823_12w30_1_prod_generic_adsp.esco
WPOS File Found:
RM823_12301_prod_238_02_boot.esco
MDM AMSS File Found:
RM823_12w30_1_prod_generic_mdm_amss.esco
MDM DSP1 File Found:
RM823_12w30_1_prod_generic_mdm_dsp1.esco
MDM DSP2 File Found:
RM823_12w30_1_prod_generic_mdm_dsp2.esco
USER AREA ERASE File Found:
RM823_12w30_1_prod_generic_user_area_erase.esco
WARNING: OSBL File is not Loaded
================================================== ====
Windows Phone Lumia Flasher
================================================== ====
If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port
If the Phone is DEAD
1. Press and Hold the VOLUME UP button
2. Connect it to the USB Port while still Pressing
the VOLUME UP button
3. Continue to Press the VOLUME UP button for 8 more
seconds
Sending USER AREA ERASE Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 396 Bytes
Status : WRITE ERASE CERTIFICATE SUCCESS
Erasing USER AREA
Status : ERASE SUCCESS
Flashing Done!
Total Flashing Time (Erase + Flashing) : 00:06:17
plz i have one the same problem.
it was work good only whatsapp app was not working
after i flashed it hang on nokia logo
Click to expand...
Click to collapse
Well, RM823 is a Lumia 900. What was your purpose for flashing your phone? To debrand it? Usually the rom thats on it is just fine.

thals1992 said:
Well, RM823 is a Lumia 900. What was your purpose for flashing your phone? To debrand it? Usually the rom thats on it is just fine.
Click to expand...
Click to collapse
plz i want to know if the the boot is destroyed or what because the phone powered on.....but hang on nokia logo

otchere said:
plz i want to know if the the boot is destroyed or what because the phone powered on.....but hang on nokia logo
Click to expand...
Click to collapse
Did you first try the hard reset method with the VolDown + Power first? The only other method I'd recommend is using the Nokia Care Suite instead of what you are using. Its much simpler. Just remember to download the latest edition with the CareSuite External cfg file.

One other thing: what phone are you flashing this *onto*? If you tried flashing a Lumia 900 ROM onto a Lumia 920, for example, there is no possible way it will work (although the flashing tool should detect the discrepancy).
By the way, to get to appropriate forums for the Lumia 900, you should go to the WP7 forums (not WP8, such as this) or possibly to a device-specific forum
Oh, and title your thread properly! Seriously, people... if somebody posts a thread with a title like "plz help me" my default response is "No. Go read the forum rules and come back when you can make posts distinguishable from spam."

[Q] Moto x blank flash complete but not enter fastboot

C:\Android>qflash.exe -com10 -ramload MPRG8960.hex -mbn 33 MSM8960_bootloader_si
ngleimage.bin -v -o
Motorola qflash Utility version 1.3
COMPORT :COM10
RAMLOADER :MPRG8960.hex
type is 0x21
7 mbn file name MSM8960_bootloader_singleimage.bin type 33
verbose mode on
Motorola qflash dll version 1.6
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
-----------------------------------------------------
RAM DOWNLOADER INFORMATION
-----------------------------------------------------
cmd : 0x2
description : QCOM fast download protocol targ
version_number : 0x7
compatible_version: 0x2
max_block_size : 0x400
flash_base_address: 0x0
flash_id_len : 0x4
flash id : eMMC
window_size : 0x1e
number_of_sectors : 0x80
-----------------------------------------------------
sdl_send_security_mode: secutiry mode 0x0
Flashing MSM8960_bootloader_singleimage.bin 1969664 bytes into device
Keeping the first packet (1024 bytes) as hostage
Will release it if all is flashed well
100
Hostage released!
done
@ but same problem here. not come to fastboot and mobile like dead.
please help me. @

Not sure what exactly you are attempting to flash? Or how?
Can you provide more details on what happened to your device and what you are now trying to do?
Thanks!
Also note, questions go in the Q&A section, not general. This thread will be moved to Q&A for you. ?

Ah! This is what you are trying...
http://forum.xda-developers.com/showthread.php?t=2629057
Unfortunately, if the method is followed exactly in that thread, and doesn't work.... There isn't much else you can do. Going to a repair shop might be the only way.

Darth said:
Not sure what exactly you are attempting to flash? Or how?
Can you provide more details on what happened to your device and what you are now trying to do?
Thanks!
Also note, questions go in the Q&A section, not general. This thread will be moved to Q&A for you.
Click to expand...
Click to collapse
My moto x xt1052 older android version 4.4.4, then i am trying to flash (ATT_XT1058_4.4-13.11.1Q2.X-69-3_CFC_1FF.xml) with RSDLite but (gpt.bin) file not to be enter. then i am unlock bootloder (Device is UNLOCKED. Status Code: 3 )
then i am trying to flash with (XT1052_RETAIL-EU_4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF.xml) then gpt.bin and some file enter but others file not to be enter then not come to fastboot and mobile like dead. then i am completely success with blank flash but same problem here. not come to fastboot and mobile like dead.

You've either downgraded and bricked, or attempted to downgrade and bricked. Ask for help in the thread I linked. But if it doesn't work, your device is likely dead. You'll need a repair shop to look at it.

What could you solve it?