Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
florian-m19 said:
Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
Click to expand...
Click to collapse
I think yes, but I'm not sure
Was wondering the same thing, does anyone know if the red magic 3 is A only or an A/B device. I'm pretty sure it's A only, but I couldn't find any documentation online.
Its A only i think.
Hum... So Project Treble should work ?
That is interesting !
If I could install Resurrection Remix to this device and provided everything works it would become really almost perfect.
If anyone wants to try... If not I'll do it myself when I have time (in 2 or 3 days)...
Regards.
If the device has treble support, meaning a vendor partition it should work no problem, a/b partitioning is really not required for treble.
I tested treble using fastboot, since twrp had some issues, but it resulted in a bootloop and a corrupted recovery partition. I managed to fix it by following: https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
Twrp gave me a mounting error for
/system_root, which is fixable by setting system to be read-only and then rebooting the recovery and re enableing read/write. Have not had the time to test using twrp and treble yet.
*I posted earlier in the day but managed to fix all the issues I had, so this a better summary :silly:
trepKep said:
I tested treble using fastboot, since twrp had some issues, but it resulted in a bootloop and a corrupted recovery partition. I managed to fix it by following: https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
Twrp gave me a mounting error for
/system_root, which is fixable by setting system to be read-only and then rebooting the recovery and re enableing read/write. Have not had the time to test using twrp and treble yet.
*I posted earlier in the day but managed to fix all the issues I had, so this a better summary :silly:
Click to expand...
Click to collapse
So, this means its not working.. Sad Story.
florian-m19 said:
So, this means its not working.. Sad Story.
Click to expand...
Click to collapse
Well not necessarily, since I flashed the lineageos gsi through fastboot. (That may be the issue) I was having issues with twrp. I will try again today, although the chances are slim.
trepKep said:
Well not necessarily, since I flashed the lineageos gsi through fastboot. (That may be the issue) I was having issues with twrp. I will try again today, although the chances are slim.
Click to expand...
Click to collapse
U should clear user data and cache after installing new system if you have bootloop problem
Make sure its A only GSI
em902566 said:
U should clear user data and cache after installing new system if you have bootloop problem
Make sure its A only GSI
Click to expand...
Click to collapse
I'll keep that in mind
trepKep said:
I'll keep that in mind
Click to expand...
Click to collapse
Hey, did you try it again?
florian-m19 said:
Hey, did you try it again?
Click to expand...
Click to collapse
No, I was busy. But I'm trying right now
Treble Attempt #2
No luck, everything flashed with no errors, but all I get is more than 10 minutes of black screen. I also tried flashing magisk right after the gsi finished, same result.
trepKep said:
Treble Attempt #2
No luck, everything flashed with no errors, but all I get is more than 10 minutes of black screen. I also tried flashing magisk right after the gsi finished, same result.
Click to expand...
Click to collapse
Hmm then we must wait for a custom Rom..
florian-m19 said:
Hmm then we must wait for a custom Rom..
Click to expand...
Click to collapse
Yeah, a one plus 7 pro port would be nice
florian-m19 said:
Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
Click to expand...
Click to collapse
Word of advice. Do not attempt to flash anything on this cell. You will regret it. I tried to flash TWRP over 6 weeks ago an it's been dead ever since. Even a cellphone repair center guy could not repair it.
You need to leave good enough alone.
People all around the world have been stuck in permanent recovery screens or fastboot screens like me.
It really is a very good cell the way it is ?
Bryceicle1971 said:
Word of advice. Do not attempt to flash anything on this cell. You will regret it. I tried to flash TWRP over 6 weeks ago an it's been dead ever since. Even a cellphone repair center guy could not repair it.
You need to leave good enough alone.
People all around the world have been stuck in permanent recovery screens or fastboot screens like me.
It really is a very good cell the way it is ?
Click to expand...
Click to collapse
Many people have faced the issue and they have recovered their device. Look for all solutions available.
danishajaz said:
Many people have faced the issue and they have recovered their device. Look for all solutions available.
Click to expand...
Click to collapse
I have. 7 weeks an counting an no working cell yet. I bought an Mi9 an no issues with it. Easy to reinstall firmware. The red magic 3 is the most difficult to repair cell I have ever encountered. I wish they had something like miflashpro for it
Treble is working from chinese ROM with twrp make sure image is A/B because this device is A/B
Related
I can no longer write any custom roms to my N6. Started with PURE 3.5 but now effects any rom i try to flash. I have brought my N6 back to factory state multiple times even relocking it. Only thing I can do is Fastboot flash N6 image from google manually piece by piece. I do have working 5.01 and phone works. Roms either hang or have errors. or just write the boot.img file. TWRP works other wise i can backup and restore, I am using 2.8.3.1. I have searched all over for a fix....
There used to be some weird mounting stuff that would make roms not boot. Thought that was worked out in pure shamu 3.1 ish.
Where do the roms hang? Did you ever fix permissions using twrp? Any kind of log you can pull?
dipstik said:
There used to be some weird mounting stuff that would make roms not boot. Thought that was worked out in pure shamu 3.1 ish.
Where do the roms hang? Did you ever fix permissions using twrp? Any kind of log you can pull?
Click to expand...
Click to collapse
I had no problem updating Pure for over a month from like 2.0 to 3.4.
they all hang when writing to system as far as i can tell. happens regardless of Pure....from a fresh clean image of 5.0 or 5.01 i can not flash any roms. driving me nutzo....i can no longer flash pure 3.4 either but i can restore the phone from a nandroid backup i had on my pc and run Pure 3.4 just fine.
Did you wipe everything except internal storage first? I had this issue earlier until I realized that I forgot to do that when coming from the stock ROM.
Pilz said:
Did you wipe everything except internal storage first? I had this issue earlier until I realized that I forgot to do that when coming from the stock ROM.
Click to expand...
Click to collapse
yes and both cache.....
also made sure system not mounted.
very frustrating.
Bignoze73 said:
yes and both cache.....
also made sure system not mounted.
very frustrating.
Click to expand...
Click to collapse
That is very odd, did you try reflashing TWRP or using a different version.
Pilz said:
That is very odd, did you try reflashing TWRP or using a different version.
Click to expand...
Click to collapse
mutiple times......tried all versions of TWRP too.
I can write a custom kernal like elementalx no problem.....just not roms.
Bignoze73 said:
mutiple times......tried all versions of TWRP too.
Click to expand...
Click to collapse
It doesn't make sense considering you also flashed back to stock. Have you also tried to flash a ROM from your PC rather than from your phone? There has to be some reasonable explanation for why it's not working.
Pilz said:
It doesn't make sense considering you also flashed back to stock. Have you also tried to flash a ROM from your PC rather than from your phone? There has to be some reasonable explanation for why it's not working.
Click to expand...
Click to collapse
how do you do that? the custom roms dont have system.img file like N6 image. The Pure 3.92 is in .dat format, another rom is folders. I also get checksum errors when extracting.
I also noticed in the last 24 hours there are 2 other threads with people have almost the same issues flashing roms. I think it has something to do with TWRP but no matter becuase no version works for me.
Bignoze73 said:
how do you do that? the custom roms dont have system.img file like N6 image. The Pure 3.92 is in .dat format, another rom is folders. I also get checksum errors when extracting.
I also noticed in the last 24 hours there are 2 other threads with people have almost the same issues flashing roms. I think it has something to do with TWRP but no matter becuase no version works for me.
Click to expand...
Click to collapse
If you restore your stock recovery on your phone you could try this.
Make sure TWRP is not installed on your phone and that the stock recovery is installed and working:
Have TWRP in your platform tools folder named however you want
Then use "fastboot boot recovery 'whatever you named TWRP' "
This will boot TWRP without installed it. Then try to flash the ROM using TWRP. You can also use the"adb push" to sideload the ROM onto your phone so you can find it via TWRP.
nope did not work.....roms just hang or flash new boot.img only.
i even tried erasing recovery partion and reflashing stock than twrp 2.8.3.1......that did not work either....something is stopping TWRP from writing to system.
thanks for your help
Bignoze73 said:
nope did not work.....roms just hang or flash new boot.img only.
i even tried erasing recovery partion and reflashing stock than twrp 2.8.3.1......that did not work either....something is stopping TWRP from writing to system.
thanks for your help
Click to expand...
Click to collapse
You're welcome, have you tried to contact some of the devs here to see if maybe they could help? I think the worst case scenario would be to RMA the phone.
Pilz said:
You're welcome, have you tried to contact some of the devs here to see if maybe they could help? I think the worst case scenario would be to RMA the phone.
Click to expand...
Click to collapse
RMA the phone??? ?What are you gonna tell them?? ? That you can't flash any custom Roms through TWRP?? ?
laureanop said:
RMA the phone??? ?What are you gonna tell them?? ? That you can't flash any custom Roms through TWRP?? ?
Click to expand...
Click to collapse
No obviously not look, but if you have other issues (in assuming you might if you can't flash a ROM) then that's the worst case scenario option.
Pilz said:
No obviously not look, but if you have other issues (in assuming you might if you can't flash a ROM) then that's the worst case scenario option.
Click to expand...
Click to collapse
This is a tough one cause if his factory image works without issues they're gonna have no reason to send him a replacement
laureanop said:
This is a tough one cause if his factory image works without issues they're gonna have no reason to send him a replacement
Click to expand...
Click to collapse
That's true, but there must be something wrong if he can't flash anything else so I'm sure he could find some issues.
Pilz said:
That's true, but there must be something wrong if he can't flash anything else so I'm sure he could find some issues.
Click to expand...
Click to collapse
Is there a tool or command to do a full memcheck of both ram and storage
rgraville said:
Is there a tool or command to do a full memcheck of both ram and storage
Click to expand...
Click to collapse
I'm not sure I've never had the need to do one from adb or fastboot
Pilz said:
I'm not sure I've never had the need to do one from adb or fastboot
Click to expand...
Click to collapse
yeah its pretty nuts....how can I return a phone that works fine other than the fact it wont flash a custom rom?
Must be another way to write a rom but TWRP......
thanks!
Bignoze73 said:
yeah its pretty nuts....how can I return a phone that works fine other than the fact it wont flash a custom rom?
Must be another way to write a rom but TWRP......
thanks!
Click to expand...
Click to collapse
I assume you are also out of the return window. Well if you are unlucky or lucky (depending on how you view it) you could have an issue eventually. They will RMA for burn in, camera issues etc... The camera issue was common in the earlier production models that I had. There should be another method, I would look into it if you have time.
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
avnash09 said:
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
Click to expand...
Click to collapse
not even a single reply.. this is not the way to treat a new member thanq
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
ast00 said:
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
Click to expand...
Click to collapse
hi ,
i am a newbie here . my phone gets heated up after the ota install of 4.1.6 so i thought of factory resetting it. after resetting it. it got struck on the one plus logo and started booting again and again. so one of my friend asked to check the forum and i used [UNBRICK] Unbrick Tutorial For The OnePlus 3T!!!!!!!!! by Haris K. from the forum. it installed the os sucessfully. but i couldnt find wifi and bluetooth buttons enabled. so i thought of installing new roms but it gets struck on the one plus logo.. please help me. thanks in advance
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Anova's Origin said:
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Click to expand...
Click to collapse
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
avnash09 said:
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
Click to expand...
Click to collapse
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
fareed_xtreme said:
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
Click to expand...
Click to collapse
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
avnash09 said:
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
Click to expand...
Click to collapse
Reflash with the MSMtool after re-downloading everything and verifying all downloads first before proceeding. Use the tool I have posted at https://forum.xda-developers.com/oneplus-3t/how-to/guide-official-op3t-stock-reset-to-oos-t3598864
Ensure you verify before starting the flash. Also uninstall or deactivate any anti virus application installed on your PC.
should i change the data partitions and everything to f2fs or other thing. system to ext4 data to f2fs
For now, don't worry about the data partitions. As mentioned above, reflash from MSMTools, verify the downloaded package first, and then check. All your issues are probably caused by a bad file.
Hey everyone! I have a weird problem. I have rooted my Honor 5C NEM-L21 but everytime i try to flash a custom rom it gets bootlooped. I have tried multiple different roms and formatting /data as f2fs , yet have the same problem everytime that i flash a custom ROM. I have as well everytime downgraded the OS back to EMUI 4 and updated the OS to EMUI 5 but it does not help with the problem. Does anyone have any idea what might cause this problem? Thanks
onnz423 said:
Hey everyone! I have a weird problem. I have rooted my Honor 5C NEM-L21 but everytime i try to flash a custom rom it gets bootlooped. I have tried multiple different roms and formatting /data as f2fs , yet have the same problem everytime that i flash a custom ROM. I have as well everytime downgraded the OS back to EMUI 4 and updated the OS to EMUI 5 but it does not help with the problem. Does anyone have any idea what might cause this problem? Thanks
Click to expand...
Click to collapse
Don't use the original TWRP
AlexMihai26 said:
Don't use the original TWRP
Click to expand...
Click to collapse
I have used HassanMirza01's TWRP everytime when flashing, that should be the correct one right?
onnz423 said:
I have used HassanMirza01's TWRP everytime when flashing, that should be the correct one right?
Click to expand...
Click to collapse
It should be,it depends if you want to flash one of his roms.I'm using Lineage with the latest TWRP and it's working .
AlexMihai26 said:
It should be,it depends if you want to flash one of his roms.I'm using Lineage with the latest TWRP and it's working .
Click to expand...
Click to collapse
Yeah, not sure what im doing wrong then. Maybe i should try to reflash the kernel after flashing the ROM. This phone is pretty painful to mod if you ask me
onnz423 said:
Yeah, not sure what im doing wrong then. Maybe i should try to reflash the kernel after flashing the ROM. This phone is pretty painful to mod if you ask me
Click to expand...
Click to collapse
I have the same problem, i tried it several times but never worked. I gave up and instaled OctRom form felix-development after all...
onnz423 said:
Yeah, not sure what im doing wrong then. Maybe i should try to reflash the kernel after flashing the ROM. This phone is pretty painful to mod if you ask me
Click to expand...
Click to collapse
Try the stock kernel.I did that to make Lineage work,or you could try first to install elite rom then the rom that you want.
EDITED : I finally wanted to go back to MI A2 on Havoc OS, I wanted a clean install so I went back to stock and then installed Havoc OS, but since Stock I had some serious wifi issues, I tried differents kernels and different stock/custom roms, i think the convrtion broke it, do you have any tips for this ?
It's hard to connect to the WIFI, and when I'm connected, ii works well for few minutes/seconds and then the connection suddently drops and disappear from wifi settings.
Thank's a lot.
____________________________________________________________________________________________________________________
OLD :
Hello guys,
I actually am on Stock 10 April update, and I'm not able to convert my MI A2 into 6X, I am wondering if I have to downgrade before flashing MIUI 9 or if the problem is me.
I already give it a try by perfectly follow the guide, and bricked my phone, I had to do the test points then, to revive my phone.
Now i'm back again on April update.
So, if tou guys have any idea, of what I've to do.
Thank you.
I've been looking at all the ROMs for the Mi A2 and they all have bugs I gave up installing a rom
Enviado do meu Mi A2 através do Tapatalk
EkineX68 said:
Hello guys,
I actually am on Stock 10 April update, and I'm not able to convert my MI A2 into 6X, I am wondering if I have to downgrade before flashing MIUI 9 or if the problem is me.
I already give it a try by perfectly follow the guide, and bricked my phone, I had to do the test points then, to revive my phone.
Now i'm back again on April update.
So, if tou guys have any idea, of what I've to do.
Thank you.
Click to expand...
Click to collapse
it is you ...the guide might also be bad ..what guide did you use ?
KevMetal said:
it is you ...the guide might also be bad ..what guide did you use ?
Click to expand...
Click to collapse
Sorry for the long time to respond.
I finally wanted to go back to MI A2 on Havoc OS, I wanted a clean install so I went back to stock and then installed Havoc OS, but since Stock I had some serious wifi issues, I tried differents kernels and different stock/custom roms, i think the convrtion broke it, do you have any tips for this ?
It's hard to connect to the WIFI, and when I'm connected, ii works well for few minutes/seconds and then the connection suddently drops and disappear from wifi settings.
Thank's a lot.
EkineX68 said:
Sorry for the long time to respond.
I finally wanted to go back to MI A2 on Havoc OS, I wanted a clean install so I went back to stock and then installed Havoc OS, but since Stock I had some serious wifi issues, I tried differents kernels and different stock/custom roms, i think the convrtion broke it, do you have any tips for this ?
It's hard to connect to the WIFI, and when I'm connected, ii works well for few minutes/seconds and then the connection suddently drops and disappear from wifi settings.
Thank's a lot.
Click to expand...
Click to collapse
search about restoring your persist partition
KevMetal said:
search about restoring your persist partition
Click to expand...
Click to collapse
Thank's I'll try this, i searched a little about it, and didn't found recent image, would 10.17 (10.18 has some issues) be ok even if i'm on Android 10 ?
https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
Edit : Does-it wipe data ?
EkineX68 said:
Thank's I'll try this, i searched a little about it, and didn't found recent image, would 10.17 (10.18 has some issues) be ok even if i'm on Android 10 ?
https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
Edit : Does-it wipe data ?
Click to expand...
Click to collapse
yes, it should be fine. no , flashing persist doesn't wipe data .... look for a twrp recovery that is compatible with flashing img files and also flashing persist partition
https://www.dropbox.com/s/w2d2z92yn6115ot/persist.img?dl=0
https://www.dropbox.com/s/mimt4go8fert44c/persist good.zip?dl=0
https://www.dropbox.com/s/zy8prxeum9qbkx5/TWRP-3.2.3-0810-XIAOMI6X-RU-wzsx150-hypeartist.zip?dl=0
KevMetal said:
yes, it should be fine. no , flashing persist doesn't wipe data .... look for a twrp recovery that is compatible with flashing img files and also flashing persist partition
https://www.dropbox.com/s/w2d2z92yn6115ot/persist.img?dl=0
https://www.dropbox.com/s/mimt4go8fert44c/persist good.zip?dl=0
https://www.dropbox.com/s/zy8prxeum9qbkx5/TWRP-3.2.3-0810-XIAOMI6X-RU-wzsx150-hypeartist.zip?dl=0
Click to expand...
Click to collapse
Thanks a lot for your help, i'll try it tomorrow, cause it's 5 O'clock here in France, i'll tell you
KevMetal said:
yes, it should be fine. no , flashing persist doesn't wipe data .... look for a twrp recovery that is compatible with flashing img files and also flashing persist partition
https://www.dropbox.com/s/w2d2z92yn6115ot/persist.img?dl=0
https://www.dropbox.com/s/mimt4go8fert44c/persist good.zip?dl=0
https://www.dropbox.com/s/zy8prxeum9qbkx5/TWRP-3.2.3-0810-XIAOMI6X-RU-wzsx150-hypeartist.zip?dl=0
Click to expand...
Click to collapse
I flashed it, it didn't work ! I don't really know from where is the issue :crying:
EkineX68 said:
I flashed it, it didn't work ! I don't really know from where is the issue :crying:
Click to expand...
Click to collapse
it only starts working properly after a few reboots ...just use the phone and it will reboot a few times and work properly
Good time of the day, I need help with resolving the issue mentioned in title. No matter which kernels I flash, bootloop consistently occurs. I flashed them using TWRP and cleared all caches as required, but to no avail. Neither on a clean system nor on a rooted one do they work
Did you recently upgrade to May1 Security Patched Firmware upgrade?
OldNoobOne said:
Did you recently upgrade to May1 Security Patched Firmware upgrade?
Click to expand...
Click to collapse
Yes, I did
VerySorryFor said:
Yes, I did
Click to expand...
Click to collapse
ok I thought so, atleast flashing disable-dmverity makes the GSI boot to rom logo but nothing beyond that, it just refuses to boot anything but the latest Stock ROM, I think its time to throw away this device (SM-M215G) into the garbage bin. Man Shamshung ruined my device, now stuck on 1UI5.1!
#Edit: You can try to contact a dev called Fredin, he might be able to help if there is any hope at all, you can find him on TGram & M21 Threads btw, all the best
VerySorryFor said:
Yes, I did
Click to expand...
Click to collapse
Have you tried flashing Kernel through Terminal or ADB sideload? Try finding out if A13 Stock ROM is R/O-System?