Database Develop

[Q] Help me!! My Captivate is a brick!!

My Captivate became the brick by failure of the recovery.
The screen remains black.
The power button and volume buttons no response.
In Japan, I cannot repair it.
I am not a member of AT&T.
Please teach it if know the shop repairing other than AT&T.

step one. get odin3 from http://forum.xda-developers.com/showthread.php?t=818439
step two install drivers if you dont already have the drivers on your computer, there are manual driver install tutorials online, google it
3. extract files and start odin.exe
4. put .pit file in the slot labled pit
5. put .tar file in the pda slot
6. plug usb data cable into computer, not into phone yet.
7. pull battery and put it back in,
8. hold volume up and volume down, insert data cable into phone and continue to hold the volume up+down buttons for at least 5 seconds. it should be in download mode. normally you have a yellow sign with a robot holding a shovel but i once had a black screen and odin still saw the device
odin will light up a box showing you are connected and the text should also indicate you are connected.
if not you may need to take other measures for download mode see here http://forum.xda-developers.com/showthread.php?t=829492&page=3
9. once you are in download and odin sees the phone hit start to flash the phone.
if the flash is not successful try to use http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click+stock+rom+jf6 instead, master clear if at all possible

It is not a download mode.
Odin3 many times I used to change the ROM, all of which succeeded.
This time, ClockWorkMod Recovery in ROM from microSD installed, black screen freezes when it reboot.
From then on, things that can both download mode button.
Also, USB does not respond to the command prompt can also ADB.
Thank you.

vv.jp said:
Odin3 many times I used to change the ROM, all of which succeeded.
This time, ClockWorkMod Recovery in ROM from microSD installed, black screen freezes when it reboot.
From then on, things that can both download mode button.
Also, USB does not respond to the command prompt can also ADB.
Thank you.
Click to expand...
Click to collapse
try building the adapter in the thread i posted, supposedly it forces download mode. also it is posible to be in download mode with a screen that is black, it happened to me once, try to flash it anyway.
you might need to take a trip to akihabara to build the jig but it's worth it i think.
also if the phone starts to a black screen then master clear it with odin one-click on that screen.

thanks for the info. saved my phone. thanks

Thank you for giving good advice!!
Thank you for giving good advice.
I try a method of "jig".
Thanks!!

Dani897 said:
step one. get odin3 from http://forum.xda-developers.com/showthread.php?t=818439
step two install drivers if you dont already have the drivers on your computer, there are manual driver install tutorials online, google it
3. extract files and start odin.exe
4. put .pit file in the slot labled pit
5. put .tar file in the pda slot
6. plug usb data cable into computer, not into phone yet.
7. pull battery and put it back in,
8. hold volume up and volume down, insert data cable into phone and continue to hold the volume up+down buttons for at least 5 seconds. it should be in download mode. normally you have a yellow sign with a robot holding a shovel but i once had a black screen and odin still saw the device
odin will light up a box showing you are connected and the text should also indicate you are connected.
if not you may need to take other measures for download mode see here http://forum.xda-developers.com/showthread.php?t=829492&page=3
9. once you are in download and odin sees the phone hit start to flash the phone.
if the flash is not successful try to use http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click+stock+rom+jf6 instead, master clear if at all possible
Click to expand...
Click to collapse
Hard bricked my phone. wont even turn on now

shae509 said:
Hard bricked my phone. wont even turn on now
Click to expand...
Click to collapse
Maybe not. I thought I was there too.
Keep trying the battery pull method. It took several times before it finally worked for me.
Here's one version:
http://forum.xda-developers.com/showpost.php?p=9024244&postcount=7
but you can try other button combinations (like just volume up, or just volume down).
If you don't see anything on your screen, that doesn't mean it hasn't worked. Sometimes the graphic for download mode gets screwed up so the screen will still be black, but ODIN will still recognize the phone.
If you really are hard bricked, then you need jtag service. MobileTechVideos can do it for you.

shae509 said:
Hard bricked my phone. wont even turn on now
Click to expand...
Click to collapse
Make/buy a Jig (forces the phone in to Download mode) if that doesn't work then like startngate said you will need a Jtag to fix it.

thanks for the reply i took it into a samsung certified repair tech here in the city he has a jtag machine. odin wouldnt recognize my device at all

[GUIDE]T-Mobile 10.1 3g Unroot back to Stock!

Hi, I was searching for a long time how to unroot my T-mobile 10.1 Galaxy tab, and I couldn't find anything. Only for the 10.1 wifi only. Didn't find one for T-mobile USA so I just made it! (BAWZ!!)
So here you go!
***Disclaimer: I am NOT responsible for any damages you cause to your device what so ever. This method worked for me but ultimately it is your responsability if anything unexpected occurs while doing this process***
Now that we got that out of the way
*Download original T-Mobile 10.1 firmware from here!
Or from here:
Mirror 1
PREP:
*Basic knowledge of how to enter Download mode and Recovery with and with out CWM.
Just in case: if your already rooted with CWM turn your tab off, press and hold the volume down first and the power key until you get to the Recovery/Download screen.(Remember use volume down (left) to navigate back and fourth and Volume up(right) to make your selection in this screen.
*You must have ODIN on your computer. (you can find this in the development section if you don't have ODIN, which you should if your rooted but if not its back in the development area.
*Need Winzip/7zip or something to extract the zip file. (When you try to unzip it's going to ask you for a password "samfirmware.com" without the quotes.)
credit to who ever uploaded this file. Not really sure but Thanks...
* USB cable/Windows (I used windows 7 32 bit)
*Make sure you have enough battery power on your tab. Mine was at 99% not sure what the minimum required is but I didn't risk it.
3. Extract the zip file you downloaded
4. Open ODIN (I use version 1.85)
5. Put your 10.1 into download mode
6. Connect your tab to PC via USB cable (ODIN should recognize your device in the COMM box, should be in the first box to the left marked with com and then a number)
7. Then check mark PDA and press that button (PDA button), now direct to the MD5 file you extracted. Open it
8. Hit start (Make sure you do not interupt the process by removing the usb cable or anyother thing just wait!)
9. Once ODIN tells you everything was successful you can unplug your 10.1 from the computer
10. Be patient let the tab restart,your going to see the original boot animation from T-Mobile.
***Note***
If your stuck in a boot loop:
1.Press the power key until the tab turns off.
2.Press and hold the volume up, volume down and power key until you get to Recovery/Download screen (let go of all the buttons)
3.Using volume down make sure recovery is selected then press the volume up key to select it.
4.Wait while your tab sets up recovery properly
5.Once you see the recovery menu wipe data/factory reset (I did it three times)
6.Final step select reboot system now. Be patient at this point your tab should restart itself normally.
I wasn't able to find any help on this so I did some looking around and now I have my TAB 10.1 back to original factory without root. I came back from CM9 ICS (needed a working camera) so I'm sure if you do this properly it will work for you to!
You can use this method if you want to change roms from ICS back to honeycomb or what ever. It is highly recommended by the DEV's to unroot and reroot if your gonna be changing roms.
If this post was helpful hit the thanks button!

[Q] Soft Brick issue

Hi,
First time working with a samsung phone, so im not very used to some samsung realted soft.
I'm doing a favor to a friend, he came to this problem where his phone woudnt boot up, He says one day he run out of battery and coudl never turn it on again.
when i turn it on, it gets stucked at boot image (first attached image), if i try to charge the battery image appears but with the loading logo (the loading logo is not moving), he told me that he also tried with another battery and the same appeared.
For what i've read there is a download mode besides recovery mode. I think i have no problem entering download mode (3rd pic), even though i don't know how to use it, pressing a button does nothing, and pluggin it to a pc (drivers installed it) seems the same.
So i wanted to enter recovery mode, and trying o factory reset it, but when i try to enter most of times nothing happens, the others i get weird screen like the one i attached.
I'm not pretty sure how to preceed now. The only thing that appears to be working is the download mode. If that's the case, how can i flahs the stock firmware on it?
Thanks for reading!

jisola said:
Hi,
First time working with a samsung phone, so im not very used to some samsung realted soft.
I'm doing a favor to a friend, he came to this problem where his phone woudnt boot up, He says one day he run out of battery and coudl never turn it on again.
when i turn it on, it gets stucked at boot image (first attached image), if i try to charge the battery image appears but with the loading logo (the loading logo is not moving), he told me that he also tried with another battery and the same appeared.
For what i've read there is a download mode besides recovery mode. I think i have no problem entering download mode (3rd pic), even though i don't know how to use it, pressing a button does nothing, and pluggin it to a pc (drivers installed it) seems the same.
So i wanted to enter recovery mode, and trying o factory reset it, but when i try to enter most of times nothing happens, the others i get weird screen like the one i attached.
I'm not pretty sure how to preceed now. The only thing that appears to be working is the download mode. If that's the case, how can i flahs the stock firmware on it?
Thanks for reading!
Click to expand...
Click to collapse
You would do the same thing as if it were custom firmware, goto http://www.sammobile.com/firmwares/, and download the stock firmware compatible with the device
Enter the device in download mode and flash the stock firmware with Odin
Instructions by SamMobile self:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minute

dolphinman310 said:
You would do the same thing as if it were custom firmware, goto http://www.sammobile.com/firmwares/, and download the stock firmware compatible with the device
Enter the device in download mode and flash the stock firmware with Odin
Instructions by SamMobile self:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minute
Click to expand...
Click to collapse
thanks for the reply, i think i might be doing something wrong, ODIN failed, i attach a screenshot, any idea?

I cannot tell much from the screenshot to be honest, all i can point at would be a newer version of Odin as the instructions told: [LINK TO ODIN 3.09]

dolphinman310 said:
I cannot tell much from the screenshot to be honest, all i can point at would be a newer version of Odin as the instructions told: [LINK TO ODIN 3.09]
Click to expand...
Click to collapse
Same error as before
im downloading some other firmwares to try, but i dont think there is the problem :s

I've been having this issue for months now. It does that exact thing. Try removing the SIM card and starting the phone as normal and see what happens. If it starts then, we have the exact problem. Mine works perfectly WITHOUT the SIM card but....what's a phone without a SIM card right? I've tried putting the Stock ROM on to no avail as well. I think my thread about this is still somewhere around but I doubt anyone managed to solve the problem either.
If you do work something out post it back. Sorry I couldn't be much help.
E: just posting my thread http://forum.xda-developers.com/showthread.php?t=2778167

[Q] How to revive a hardbrick Samsung Galaxy S5 SM-G900P?

I would like to ask if there is any possibility to unbrick it as I just got myself into trouble.
Initial states of phone:
Model : SM-G900P (supposingly, as it was shown in Odin, but within the device info and backside label is SM-G900F)
PDA & CP & CSC : G900FXXU1BOK2 (reflected via *#1234#)
Android 5.0 Lolipop
*Just in case, you are curious why this phone was in this stage, that is the original state of phone which I bought, it is refurbished, sold to me as G900F (ofc, being cheated) and that time I was not geek in phone and didn't realize it is a problem.*
*G900FXXU1BOK2 is not available in any website download so far.
Potential Cause of hard brick:
I noticed there is something not right about the PDA so forth, so I attempted to update everything with Flashfire(Rooted) with G900FXXU1CPGK downloaded from sammobile. (the reason that I didn't use Odin is because bootloader of G900P will automatically reject it with aboot error). And so Flashfire did everything.
Current states of phone:
1. Power button : system won't boot
2. Power + Vol Up + Home : Blank, no power, no recovery
3. Power + Vol Down + Home : Blank, no power, no download mode
4. Charger : Not charging
5. Odin3 is unable to detect the phone
6. adb is unable to detect the phone
I searched around Google and notice there are several options might work under this circumstance:
1. G900F phone: Mount bootloader recovery and .pit file into sd card and boot it with sd card into download mode, then re-flash everything (but this is a G900P phone, I can't find any BL recovery file associated with this model)
2. JTag service
Much appreciate if anyone can enlight me with more viable options or ways to get this fix.

[Q] Stuck in bootloop after trying to install a custom ROM, unable to detect the device through ADB/Fastboot [Solved]

Title says it all. But for those that want to know a bit more in detail about what's going on, I tried to install this custom ROM: https://forum.xda-developers.com/t/rom-oneui-2-5-twrp-ncx-2-5-for-a71-sm-a715f.4174135/ Clearly I did something wrong (a bit more clarification in that guide would help people not used to rooting an Android device getting through that process easier), so now I want to go to square 1 by installing the stock ROM again. But the thing is, after installing multidisabler through TWRP, the phone is not permanently stuck into a bootloop and now I can't even go into safemode, nor download mode, and I can't enter the recovery mode, the only thing my phone is capable of doing is to restart by itself by holding the volume down and the power buttons at the same time, and now ADB nor Fastboot can't detect my device (the PC does a Samsung device being connected though, so it's not a hardbrick, I guess).

Samsung devices do not use Fastboot. You should restore through Odin instead.
Try the following:
1. Download Odin on your computer, you can get it from here. Extract it into a folder.
2. Download the firmware for your device. Find out your device model first and then look on http://samfw.com, I've downloaded from there a lot in the past, it works great.
3. Extract the firmware, you should get five files: AP, BL, CP, CSC, and HOME_CSC.
4. Make sure your device is powered off, and press power + volume down + bixby. You should be asked to confirm you want to enter download mode, press the volume up button.
5. Plug your device into the computer, then select the files for all the slots. Use CSC, not HOME_CSC for CSC (CSC is for fresh restore, HOME_CSC is for software update).
6. A device should show in the top bar, something like [COM:6]. This means your device is connected. If it isn't there, make sure your device is plugged in and in Download Mode.
7. Click flash. The firmware should start to flash and there should be a progress bar in Download Mode. Once it's finished your device should reboot into the system.

ChasTechProjects said:
Samsung devices do not use Fastboot. You should restore through Odin instead.
Try the following:
1. Download Odin on your computer, you can get it from here. Extract it into a folder.
2. Download the firmware for your device. Find out your device model first and then look on http://samfw.com, I've downloaded from there a lot in the past, it works great.
3. Extract the firmware, you should get five files: AP, BL, CP, CSC, and HOME_CSC.
4. Make sure your device is powered off, and press power + volume down + bixby. You should be asked to confirm you want to enter download mode, press the volume up button.
5. Plug your device into the computer, then select the files for all the slots. Use CSC, not HOME_CSC for CSC (CSC is for fresh restore, HOME_CSC is for software update).
6. A device should show in the top bar, something like [COM:6]. This means your device is connected. If it isn't there, make sure your device is plugged in and in Download Mode.
7. Click flash. The firmware should start to flash and there should be a progress bar in Download Mode. Once it's finished your device should reboot into the system.
Click to expand...
Click to collapse
Well, trying to reflash everything through Odin has been a thing I tried to do, but how am I supposed to shutdown a phone that is stuck at the Samsung logo (is there any combination to shutdown a Samsung during the boot process?)? And even after that, how am I supposed to press "power + volume down + bixby" if both the power and bixby buttons are the same buttons?

racer21 said:
Well, trying to reflash everything through Odin has been a thing I tried to do, but how am I supposed to shutdown a phone that is stuck at the Samsung logo (is there any combination to shutdown a Samsung during the boot process?)? And even after that, how am I supposed to press "power + volume down + bixby" if both the power and bixby buttons are the same buttons?
Click to expand...
Click to collapse
Long press vol+,vol- and power and in the same time plug in in your pc

geekmaster21 said:
Long press vol+,vol- and power and in the same time plug in in your pc
Click to expand...
Click to collapse
I tried entering Download Mode hours ago, but to no avail. Even before flashing mutidisabler through TWRP (and thus, the phone was working), I had to use ADB in order to make my phone be able to enter Recovery Mode, since the combo for recovery and download mode just made my phone make a loud noise and restart my phone onto safe mode.

Ok, here's an update, apparently pressing those buttons, makes the screen have the same, but at least Odin recognizes the drive, but now I'm stuck at this error: "Complete(Write) operation failed."
Something's weird here, I'm 99.9% sure I did activate USB debugging for this phone, although that was just before wiping the entire drive before the phone got stuck in this loop.

Fixed. Many thanks to @hainguyenthao for helping me out ^^

racer21 said:
Title says it all. But for those that want to know a bit more in detail about what's going on, I tried to install this custom ROM: https://forum.xda-developers.com/t/rom-oneui-2-5-twrp-ncx-2-5-for-a71-sm-a715f.4174135/ Clearly I did something wrong (a bit more clarification in that guide would help people not used to rooting an Android device getting through that process easier), so now I want to go to square 1 by installing the stock ROM again. But the thing is, after installing multidisabler through TWRP, the phone is not permanently stuck into a bootloop and now I can't even go into safemode, nor download mode, and I can't enter the recovery mode, the only thing my phone is capable of doing is to restart by itself by holding the volume down and the power buttons at the same time, and now ADB nor Fastboot can't detect my device (the PC does a Samsung device being connected though, so it's not a hardbrick, I guess).
Click to expand...
Click to collapse
I'm sorry to hear that you had trouble installing the ROM and I'm glad you were able to fix it.
I unfortunately can't see a way that I could make the tutorial on how to install the ROM any easier. I'm almost certain I covered all my bases going over the perquisites and how to install the ROM. I also have a Telegram group in that thread so that users can join if they are ever stuck in any of the steps so that either me or other users that have successfully installed the ROM can help people in doubt since I'm not available 100% of the time. If you ever decide to give it a try again, don't be shy, you can always join the group and request for help.