Related
Have my Mi 8 about a week, loving it BUT as the bootloader is unlocked I couldn't use Google Pay so I decided to install TWRP and get the Xiaomi.eu ROM.
I just installed TWRP and tried backing up the phone, but I got an error saying it Can not create the folder. I reinstalled TWRP, thinking maybe there was an issue with the first install but now it's stuck in a recovery boot loop. It loads to the MI screen with the unlocked icon but doesn't get to the powered by android, it goes straight into recovery.
The Rom is not on the device and I thought maybe could install it through the recovery but if I have the phone plugged into the laptop (Windows 10) and go into recovery, the touch screen on the phone doesn't work and the phone keeps rebooting itself.
I can also get into Fastboot and the device is detected by miFlash.
What should I do next, I don't trust my instincts. Any advice would be much appreciated. I'm currently downloading the Global Rom off Xiaomi (going to take a while on my 3mb broadband) and hoping I can flash that with miFlash tool, good or bad idea??
U can use otg usb and put the rom on it.
Boot to twrp and wipe data (the one that ask you to say yes? Than install the rom(choose one for recovery flashing not fastboot)
gm007 said:
U can use otg usb and put the rom on it.
Boot to twrp and wipe data (the one that ask you to say yes? Than install the rom(choose one for recovery flashing not fastboot)
Click to expand...
Click to collapse
Cheers for the reply! Unfortunately I don't have an adapter to put the rom on the phone. I'll order one now, always good to have for situations like this.
Any other way of getting the phone up and running sooner? If not, no problem, I'll just have to wait for the adapter.
cherbe.3 said:
Cheers for the reply! Unfortunately I don't have an adapter to put the rom on the phone. I'll order one now, always good to have for situations like this.
Any other way of getting the phone up and running sooner? If not, no problem, I'll just have to wait for the adapter.
Click to expand...
Click to collapse
Sure there must be a fastboot method but didn't tried it yet, i had this phone 3 days ago
Not sure if after formatting data and reboot to twrp you can copy the rom from pc to phone.
One more thing if you use fastboot method be sure not to relock the bootloader cause you may brick ur phone.
If you want to install xiaomi.eu rom dont just wipe data but you have to format data then type yes. Reboot to twrp again. And at twrp recopy the xiaomi.eu rom.
Sent from my MI 8 using Tapatalk
Flash last MIUI global dev. Flash twrp. Wipe only data. Transfer Rom to phone. Flash Xiaomi eu Rom. Done
ariekumbang said:
If you want to install xiaomi.eu rom dont just wipe data but you have to format data then type yes. Reboot to twrp again. And at twrp recopy the xiaomi.eu rom.
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
the only right answer, all other are more or less useless.
you need to wipe data, then format data (confirm with yes)
after that, hold power+up to reboot in twrp again
(or go to mainmenu and choose reboot to recovery),
connect your Mi8 with Usb cable to PC and copy the xiaomi.eu rom to your mi8
and then flash it.
gm007 said:
One more thing if you use fastboot method be sure not to relock the bootloader cause you may brick ur phone.
Click to expand...
Click to collapse
Oh yes, thank you for the reminder, that slipped my mind with this whole mess.
ariekumbang said:
If you want to install xiaomi.eu rom dont just wipe data but you have to format data then type yes. Reboot to twrp again. And at twrp recopy the xiaomi.eu rom.
Click to expand...
Click to collapse
Cheers for the advice, I'll make sure to format before installing. Only issue now is that I can't get the rom onto the phone to install it. Do you reckon if I format the data through TWRP it will then allow me to copy over the rom onto the device? Currently, unless in fastboot, the laptop doesn't recognise the device - constantly reboots the phone causing it to connect and disconnect.
SPOCK_VULKAN said:
Flash last MIUI global dev. Flash twrp. Wipe only data. Transfer Rom to phone. Flash Xiaomi eu Rom. Done
Click to expand...
Click to collapse
I like the sound of this solution but I have a few questions/need clarification as this mess has made me doubt myself (no issue flashing my previous phone mi5)
I downloaded the Global rom from here: http://en.miui.com/download-346.html#523 (just want clarification this is the official rom) I have the latest version of the miFlash. Am I right in thinking, put phone into fastboot, launch tool, locate unzipped rom folder, select 'Clean all' (and not save user data / clean all and lock (presume this means bootloader)) and click Flash??
And then do I start again, flash TWRP and hope it works?
deepblue2000 said:
the only right answer, all other are more or less useless.
you need to wipe data, then format data (confirm with yes)
after that, hold power+up to reboot in twrp again
(or go to mainmenu and choose reboot to recovery),
connect your Mi8 with Usb cable to PC and copy the xiaomi.eu rom to your mi8
and then flash it.
Click to expand...
Click to collapse
If I do this (wipe data and format) will the laptop detect the device to allow me to move the rom onto the phone, currently it doesn't (well it loops between connecting and disconnecting when in TWRP, no issue detecting in fastboot)
normally if twrp is launched, you can copy files as usual from pc to your Mi8
should be a stable connection.. (Win7/10 or any other Win)
if it keeps connecting/disconnecting you can try an other usb port.
do you use the right twrp ?
https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-3-0-mi-8-t3837745
and you enabled usb debugging in settings before you flashed twrp ?
(I think without it will not work, even to flash twrp it is needed, so you did it)
deepblue2000 said:
the only right answer, all other are more or less useless.
you need to wipe data, then format data (confirm with yes)
after that, hold power+up to reboot in twrp again
(or go to mainmenu and choose reboot to recovery),
connect your Mi8 with Usb cable to PC and copy the xiaomi.eu rom to your mi8
and then flash it.
Click to expand...
Click to collapse
deepblue2000 said:
normally if twrp is launched, you can copy files as usual from pc to your Mi8
should be a stable connection.. (Win7/10 or any other Win)
if it keeps connecting/disconnecting you can try an other usb port.
do you use the right twrp ?
https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-3-0-mi-8-t3837745
and you enabled usb debugging in settings before you flashed twrp ?
(I think without it will not work, even to flash twrp it is needed, so you did it)
Click to expand...
Click to collapse
I've tried several USB ports and different cables, no luck getting it to connect.
No the TWRP installed is 3.2.1-0611-XIAOMI8, yours uses the code name and seems to be a newer version and more legit, I'm going to flash that onto the phone. I presume do it the way I did it before - fastboot, shift right click to get to cmd line...etc.
I did indeed enable usb debugging when I installed it originally.
By the way, thanks so much for your help, I'm lost without my phone - it was love at first sight
Fastboot Flashing Code
Code:
Fastboot boot Twrp.img
Flash the recovery img again inside twrp and reboot to recovery again and it will stay.
If u are new to twrp, format data in twrp and reboot to recovery again and flash this file https://androidfilehost.com/?fid=3700668719832238534 after that u can flash the rom.
If u have already twrp installed, just flash the img in twrp
Click to expand...
Click to collapse
Actually I'm confused now, is this probably where I went wrong in the first place.
Boot the TWRP img and then flash it through TWRP, I've never done it this way before (have I been doing this worng all along?)
and whats the other file about? Disable_Dm-Verity_FEC_v1.1.zip
Sorry about all the questions
you can flash/update twrp inside twrp itself, but you dont need it.
I never used any tools or bat files, just normally installed adb,
and put the twrp.img in the same folder.
then open cmd:
fastboot flash recovery twrp.img
to boot into twrp again:
fastboot boot twrp.img
never heard from this fec1.1 zip, so ignore it.
you should go to the xiaomi.eu forum for help,
https://xiaomi.eu/community/threads...ing-xiaomi-eu-8-8-30.46378/page-2#post-444327
there are the steps posted what to do
deepblue2000 said:
you can flash/update twrp inside twrp itself, but you dont need it.
I never used any tools or bat files, just normally installed adb,
and put the twrp.img in the same folder.
then open cmd:
fastboot flash recovery twrp.img
to boot into twrp again:
fastboot boot twrp.img
never heard from this fec1.1 zip, so ignore it.
you should go to the xiaomi.eu forum for help,
https://xiaomi.eu/community/threads...ing-xiaomi-eu-8-8-30.46378/page-2#post-444327
there are the steps posted what to do
Click to expand...
Click to collapse
Right, so I got TWRP 3.2.3 installed and seems to be working (not disconnecting and reconnecting) BUT the phone is still not recognsed - It says unspecified in the devices . I ran through the ADB set up, all installed including drivers but still no phone showing up. I hate windows 10 and drivers, can't get them to play nice (or it's me)
I had never any problems with Win10 x64,
I dnever installed any driver for my Mi5/6 and now 8,
win10 detects everything automatically, if you have installed any driver, maybe just
uninstall them and restart win10
deepblue2000 said:
I had never any problems with Win10 x64,
I dnever installed any driver for my Mi5/6 and now 8,
win10 detects everything automatically, if you have installed any driver, maybe just
uninstall them and restart win10
Click to expand...
Click to collapse
AND WE'RE IN!!! THANK YOU, THANK YOU!! If you were here I'd hug you and get you a drink.
Forget my above nonsense and babble, PC wasn't happy with whatever was going on, once I got brave enough and actually followed your instructions in all fell into place!!
So conclusion -
I had the wrong TWRP (3.2.3 is needed)
PC didn't like whatever was happening without the OS
Wiped and formatted through TWRP - Phone was recognised
Dragged Xiaomi.eu rom over - copied perfectly
Flashed rom - successful and the wiped cache again to be safe
Rebooted and my smile came back the moment I saw the 'powered by android' icon
Went through set up and I'm back in.
Mi 8 - bootloop and locked device, no system, help?
Hi guys,
I did a pretty much bad thing on my phone, I've just bought it 2 weeks ago and I was loving the phone, my phone is unlocked but today I was rooting to install google camera with night sight and I don't know why my twpr was really weird, when pressing install all the folder that was showing was very different from youtube videos about mi 8 root and even compared to my old devices, it was showing folders like licence and others, but the weirdest was inside the sdcard folder that was showing a lot of unnamed folders(like this: 54u3hu6ijj4!ji5), the thing got worse when I've flashed magisk and the phone got stuck on bootloop, after that tried to flash a stock global rom from official Mi website on fastboot mode using Mi Flash Toll, what I did wrong is that I didn't see that the Lock option was ticked and than I pressed to flash, everything was going good when my device showed a message saying that the Miui wasn't compatible with my phone. After that I've tried to install TWPR again but my phone was locked by the Mi flash toll and know my device is without system and unlocked. I've also tried to unlock but is saying that my account is not bound to my device, so I have no idea what to do, I'm gonna never root any phone ever, worse thing I did.
Can Anybody know what I can do to unlock the phone?
Sorry about my English, that's not my native language.
GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
itzabhi said:
GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
Click to expand...
Click to collapse
I found the solution all i had to do is change the rom folder to C:// and it worked!
Its not working for me plz help me
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
i dont know what is wrong but falsh is getting completed in 1 second.
roushancool said:
i dont know what is wrong but falsh is getting completed in 1 second.
Click to expand...
Click to collapse
Bro first of all u need to edit the flashall commands with the notepad and then u should put the rom folder on the desktop and put the mi flash tool on a separate folder also on the desktop if u want me to tell u what to edit just message me and i will tell u how ?
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
Bro first of all put the rom in a folder on the desktop (one folder and the files in it ) (not folder inside a folder)
Next copy the flashtool folder to the desktop also
Next edit the flash_all.bat and remove the commands up and keep only commands that starts with (fastboot)
And save.
Then choose the folder and then flash and make sure u choose only (clean all) and not (clean all and lock) from below goodluck bro hope the picture will make you understand
Hi All,
I was trying to install the CN ROM in my Nubia redmagic 3 but now it's bricked.
I forgot to enable the developer option in my phone before I tried to install the CN Rom.
Now my device is showing me Your device is corrupt.It can't be trusted and will not boot.
I tried to connecty phone to pc and in device manager it shows usb unrecognised.
Can someone please help me to fix my phone.
Thanks in advance.
Abhinil2009 said:
Hi All,
I was trying to install the CN ROM in my Nubia redmagic 3 but now it's bricked.
I forgot to enable the developer option in my phone before I tried to install the CN Rom.
Now my device is showing me Your device is corrupt.It can't be trusted and will not boot.
I tried to connecty phone to pc and in device manager it shows usb unrecognised.
Can someone please help me to fix my phone.
Thanks in advance.
Click to expand...
Click to collapse
Use the recovery tool, it even has instructions.
Finally the issue is resolved
Was able to fix my phone thanks to the recovery tool provides by @JerryYin
Abhinil2009 said:
Was able to fix my phone thanks to the recovery tool provides by @JerryYin
Click to expand...
Click to collapse
I have the same problem. Which tool is this ??
My phone starts up where it has the RESET options. RESTART IN RECOVERY MODE AND ETC ... I downloaded the official ROM, but found it only in ZIP format. How to install in this format? Help me please
yurifonseca said:
I have the same problem. Which tool is this ??
My phone starts up where it has the RESET options. RESTART IN RECOVERY MODE AND ETC ... I downloaded the official ROM, but found it only in ZIP format. How to install in this format? Help me please
Click to expand...
Click to collapse
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
RZaR2001 said:
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Click to expand...
Click to collapse
I was able to solve it thanks to your help and the user JerryYin; THANK YOU VERY MUCH !! GOD BLESS YOU!!!!!!!!!!!!!!!!!!!!!!:crying::crying::crying::crying::crying:
Issue regarding device corrupted after cn rom installation.
whenever you want to go for the China rom from global rom version 2.15 do not install the latest China rom install China rom version 2.18 first then upgrade to the latest if you will try to install the latest you will just soft brick your device. And if you soft brick your device don't panic just boot into fastboot mode and flash the stock recovery of redemagic 3 into your phone now place either global rom or China rom v 2.18 Into the pendrive and connect to the device otg boot into the stock recovery there you will see a option install update via otg select the option and locate the package and install let the device boot first boot will take 2 to 3 minutes and now your device has been recovered without any tool. PLEASE BEWARE DO NOT INSTALL CHINA ROM WITHOUT UNLOCKING YOUR BOOTLOADER CAUSE IF YOU MESS ANYTHING IN INSTALLATION OF CHINA ROM IN A LOCKED BOOTLOADER THERE IS A CHANCE THAT YOU MAY HARD BRICK YOUR DEVICE.
Amandogra1997 said:
whenever you want to go for the China rom from global rom version 2.15 do not install the latest China rom install China rom version 2.18 first then upgrade to the latest if you will try to install the latest you will just soft brick your device. And if you soft brick your device don't panic just boot into fastboot mode and flash the stock recovery of redemagic 3 into your phone now place either global rom or China rom v 2.18 Into the pendrive and connect to the device otg boot into the stock recovery there you will see a option install update via otg select the option and locate the package and install let the device boot first boot will take 2 to 3 minutes and now your device has been recovered without any tool. PLEASE BEWARE DO NOT INSTALL CHINA ROM WITHOUT UNLOCKING YOUR BOOTLOADER CAUSE IF YOU MESS ANYTHING IN INSTALLATION OF CHINA ROM IN A LOCKED BOOTLOADER THERE IS A CHANCE THAT YOU MAY HARD BRICK YOUR DEVICE.
Click to expand...
Click to collapse
Ohh, i made this mistake, I installed last cn rom to my red magic 3 than i got stuck in fastboot mode!
Please help me to solve this ;(
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Use this
I used this tool and got error in last step.
yurifonseca said:
I was able to solve it thanks to your help and the user JerryYin; THANK YOU VERY MUCH !! GOD BLESS YOU!!!!!!!!!!!!!!!!!!!!!!:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I'm unable to download the tool
The unbrick tool only works if your bootloader is unlocked other wise it wont do a thing if you've relocked your bootloader. wheres the fix for a locked bootloader ?????????????
vibraniumdroid said:
Use the recovery tool, it even has instructions.
Click to expand...
Click to collapse
Hey bro should I install Nubia Rm3s rom in my Rm3 ?
xxanthonyheaverxx said:
The unbrick tool only works if your bootloader is unlocked other wise it wont do a thing if you've relocked your bootloader. wheres the fix for a locked bootloader ?????????????
Click to expand...
Click to collapse
Unbrick tool only work if you boot to edload mode. Ok
Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Ifuckinghatemyselfandall said:
Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Click to expand...
Click to collapse
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
flairepathos.info said:
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
Click to expand...
Click to collapse
I am going to try the mtk bypass tool, is that going to work? if not i am going to try your instructions, however it did not boot into the recovery even after reflashing , i have tried that before with the twrp app
It cannot detect the device, it isnt in device manager either, i am getting scared
edit: actually it gets detected in device manager as "usb serial device (com4)" when i hold the power button, volume up and volume down at the same time, when i do that, the device stays with a black screen
SP flash tool still does not detect it
it seems to be disconnecting while in this state
Please help, i cant turn the device off
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Ifuckinghatemyselfandall said:
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Click to expand...
Click to collapse
You need to flash the SAME miui version present on the device first.
VD171 said:
You need to flash the SAME miui version present on the device first.
Click to expand...
Click to collapse
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
It is now giving me "error status error" please help
Ifuckinghatemyselfandall said:
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
Click to expand...
Click to collapse
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
VD171 said:
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
Click to expand...
Click to collapse
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Ifuckinghatemyselfandall said:
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Click to expand...
Click to collapse
Custom recovery will never brick a device.
VD171 said:
Custom recovery will never brick a device.
Click to expand...
Click to collapse
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Ilovethewholeworldbutme said:
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Click to expand...
Click to collapse
Just flash the full stock miui again.
Hi recently I tried to install TWRP on my xiaomi 12 pro but instead it made my phone stuck on fastboot, I used mi flash to flash it to the normal rom but it said something about it being not supported so I picked wipe date on the phone and tried to install a different version but, now apparently the phone is locked and I do not know how to unlock it to flash it again. any help will be appreciated please.
Things I've tried
fastboot oem unlock
fastboot flashing unlock
Mi flash - I cant flash because the device is locked and I have not logged in with a Mi account.
XiaoMiTool v2
Flashing twrp again
Ritual224 said:
Hi recently I tried to install TWRP on my xiaomi 12 pro but instead it made my phone stuck on fastboot, I used mi flash to flash it to the normal rom but it said something about it being not supported so I picked wipe date on the phone and tried to install a different version but, now apparently the phone is locked and I do not know how to unlock it to flash it again. any help will be appreciated please.
Things I've tried
fastboot oem unlock
fastboot flashing unlock
Mi flash - I cant flash because the device is locked and I have not logged in with a Mi account.
XiaoMiTool v2
Flashing twrp again
Click to expand...
Click to collapse
Which version?
So as not to make the same mistake again if we manage to save the phone.
Which TWRP and which command.
For Miflash you have probably left the flash and lock box checked.
If you could post the Miflash log (Miflash log folder)
I used this guide to install twrp
I put global rom instead of europe rom which came with my phone
I do have another xiaomi device I was wondering it I could somehow transfer the account to my bricked phone then flash it that way
Ritual224 said:
I used this guide to install twrp
I put global rom instead of europe rom which came with my phone
I do have another xiaomi device I was wondering it I could somehow transfer the account to my bricked phone then flash it that way
Click to expand...
Click to collapse
Is the version of your phone Chinese with a Xiaomi EU rom?
I bought it from Here
It says in the description that 'The initial Chinese version has been updated to a global ROM.'
so I'm not sure when I got it I checked the rom and it said the Europe version I tried to update the version but when it was ready to install it said 'your device supports twrp' and I clicked ok to the instructions and when the device booted back up it was in recovery mode and I pressed restart and no updates were made.
Ritual224 said:
I bought it from Here
It says in the description that 'The initial Chinese version has been updated to a global ROM.'
so I'm not sure when I got it I checked the rom and it said the Europe version I tried to update the version but when it was ready to install it said 'your device supports twrp' and I clicked ok to the instructions and when the device booted back up it was in recovery mode and I pressed restart and no updates were made.
Click to expand...
Click to collapse
It is a Chinese version.
post the Miflash log (Miflash log folder) so I can check what you did.
The log is between 20 and 25 KB and starts like this
[23:28:45 eeab043a]:MiFlash 2020.3.14.0
[23:28:45 eeab043a]:vboytest index:1
[23:28:45 eeab043a]:idproduct: 53261 idvendor: 6353
I think I deleted the one that I used I was on my i've just given up after hours of trying to fix it
Ritual224 said:
I think I deleted the one that I used I was on my i've just given up after hours of trying to fix it
Click to expand...
Click to collapse
You have used Miflash look here if you have ticked the right box.
The last paragraph.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Yes I selected that clean and lock device after that I restarted then it went to the recovery mode and gave me the rom isnt supported on your device and I clicked wipe data now were here. I'm trying to get out of this mode idk how I can
Ritual224 said:
Yes I selected that clean and lock device after that I restarted then it went to the recovery mode and gave me the rom isnt supported on your device and I clicked wipe data now were here. I'm trying to get out of this mode idk how I can
Click to expand...
Click to collapse
As you have on my tutorial, this is the mistake not to do with a Chinese device.
Now to be sure, flash a Chinese rom with Miflash by checking the Clean all box.
Either the phone works again or not, Miflash will give you the error, surely 'lock state'
yes it says failed remote: erase is not allowed in lock state, im trying to get out of that mode I need help with that
Ritual224 said:
yes it says failed remote: erase is not allowed in lock state, im trying to get out of that mode I need help with that
Click to expand...
Click to collapse
I will send you a PM.
NOSS8 said:
I will send you a PM.
Click to expand...
Click to collapse
Hi! I have the same exact issue. Any help would be really appreciated.
toulan said:
Hi! I have the same exact issue. Any help would be really appreciated.
Click to expand...
Click to collapse
I will send you a PM.