Can not go to Recovery mode or Fast boot Mode or Boot up "Black Screen"
but still detect USB mode at PC (device manager)
Must conect to PC:
1.Download and install adb driver
2.Download and install Miphone Module (MiFlash Module)
3.Download Stock miui rom (Fastboot Rom not flashzip rom)
4.extract your fastboot miui download rom (extract file should be one image folder and some flash file.bat)
5.Copy MiFlash.exe from your instalation from step 2 to fastboot rom extract directory
6.Conect your phone to pc
7.Start MiFlash exe from extract directory
8.Browse Fastboot rom when you already extract before from MiFlash.exe Taskbar
9.Choose one method flash from bottom taskbar
10.And Click Flash...wait until 100% succesfull
11.Your Done
Note:Mode Flash All (All Data will erase)
Test under Xiaomi Mi4W
OS:Win.8.1 x64
Hope this is can help
My Regard
Dona55 said:
Can not go to Recovery mode or Fast boot Mode or Boot up "Black Screen"
but still detect USB mode at PC (device manager)
Must conect to PC:
1.Download and install adb driver
2.Download and install Miphone Module (MiFlash Module)
3.Download Stock miui rom (Fastboot Rom not flashzip rom)
4.extract your fastboot miui download rom (extract file should be one image folder and some flash file.bat)
5.Copy MiFlash.exe from your instalation from step 2 to fastboot rom extract directory
6.Conect your phone to pc
7.Start MiFlash exe from extract directory
8.Browse Fastboot rom when you already extract before from MiFlash.exe Taskbar
9.Choose one method flash from bottom taskbar
10.And Click Flash...wait until 100% succesfull
11.Your Done
Note:Mode Flash All (All Data will erase)
Test under Xiaomi Mi4W
OS:Win.8.1 x64
Hope this is can help
My Regard
Click to expand...
Click to collapse
i have tried this method but somehow my phone is still in bootloops. i cant access recovery but fastboot is still possible on the MI 3
bnambiar1997 said:
i have tried this method but somehow my phone is still in bootloops. i cant access recovery but fastboot is still possible on the MI 3
Click to expand...
Click to collapse
bootloops it is ROM Problem maybe You have FLASH with the wrong ROM...
If Success with the right ROM, it is should be Done/Fine, and can not access Recovery Mode Perhaps your Volume Up Button has Broken....
My Regard
bnambiar1997 said:
i have tried this method but somehow my phone is still in bootloops. i cant access recovery but fastboot is still possible on the MI 3
Click to expand...
Click to collapse
Your issue resolved? If not and you don't have recovery then get the latest TWRP recovery and rename it to recovery so the file would be "recovery.img" and put it inside the folder where you have fastboot.exe file.
Now connect your phone to Windows PC and in the same fastboot folder open command prompt (Shift + Right click > then you will see "open command window here" - click on it).
Now type : fastboot devices + enter. If you can see an entry then enter the next command as below
fastboot boot recover.img - This will format the recovery partition with the TWRP and also boot into recovery.
Now you can flash ROM as you want.
Please hit the Thanks button below, if I have helped.
hi,
my micromax a1 was runnning marshmallow 6.0.1 when during a security patch update installation got stuck and failed to boot again. now just booting into "dead android with exclamation mark". upon pressing power button and volume up and going into recovery(Android stock recovery) menu , cant wipe partition or data as it throws error "E: failed to mount/ cache" errors..
upon trying to install with any SD card also throws same error.
then i tried to install through ADB, while connecting to PC , PC not detecting mobile in recovery mode but detecting in bootloader mode. with fastboot flash command (for installing TWRP/CWM) in bootloader mode, error coming as "sending recovery failed(unknown status code)" .
Kindly help...
same happened to me yesterday . do you find any solution ??
Hi there !
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
HIT THANKS IF HELPED
if link do not work here properly then just google 'canvas a1 stuck on startup' ... and follow link in associated with xda
Device is dead
My phone is neither switching on, nor charging.
I flashed the stock ROM due to some problem with the rooted device through SP Flash tools. It completed successfully, but the device is not switching on or charging.
KIndly help
# SUPPORT Huawei P8 Lite
Huawei P8 Lite - Install TWRP Recovery (V2, V3.0.0, V3.0.2), Full System Backup, Android Root (5 & 6) and Return to Recovery Stock - April 27, 2017 Updated.
(Works both on Android 5 and 6 with models L21 and L23).
(HiSilicon Kirin 620 processor.)
DO THIS UNDER YOUR RESPONSIBILITY!
IMPORTANT!
-If you are not sure to do this tutorial better do not do it, there is no hurry so quiet.
<< INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) >>
There are 3 methods to do it, through PC or through an App, which is very simple, here I explain how:
Method 1 - Using PC - Automatic Process:
Instructions for both versions:
1. Download INSTALAR RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
4.Start your phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
5. Unzip "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar" and run the file "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.bat" and Follow the steps
It will not take more than 5 minutes, it's just a matter of pressing ENTER, that's it!
Files:
TWRP V2: https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3.0.0: https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
TWRP V3.0.2: https://mega.nz/#!rFcX3TxC!89ePFv4x9iEvv22WCO-AUHjIDeFhKw4UUIuZ4d7p7LU
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 2 - By App:
Instructions for both versions:
1.Search in the Playstore App "Flashify", Download and Install.
2.Download the RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip
3. Unzip RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip.
4.Start the flashify app, drop root permissions and continue.
5.Press "recovery image"> "choose a file", select the scanner of your choice, search and select the Recovery that you downloaded.
6. Click on "Yup", wait for the process to finish.
7.The App can be closed.
Files:
TWRP V2: https://mega.nz/#!PBN0DAyD!NzWAX8Kn0ZtHftJZmf1_bir4OoppThMVwjP9Q6XXK9s
TWRP V3.0.0: https://mega.nz/#!LZtUnSDS!N2dFfxiK4ed5dplkt0o9lQAeAzLVgLVxgy0pXCYeOgw
TWRP V3.0.2: https://mega.nz/#!bNNRCBBY!UdXY6yWcoryK47SgV0352_JNfFLE0oIReaXDtqwWJaI
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 3 - Using PC - Manual Process:
Instructions for both versions:
1. Download and Unzip the file minimal_adb_fastboot_v1.3.1_setup.rar.
2. Run the minimal_adb_fastboot_v1.3.1_setup.exe program and complete the installation steps.
3. Go to the installation path of the program "C: \ Program Files (x86) \ Minimal ADB and Fastboot" (depending on your operating system may vary).
4. Copy the recovery file that you want to install to the path mentioned above. Example: "RecoveryTwrpV3.0.2.img".
5. Start your Phone in Fastboot mode: Switch off the phone and press the "vol-" key and without releasing it, connect it to the PC until the Fastboot screen appears.
6. Run the program "MAF32.exe" (located in the installation path) with or without administrator permissions, a black window with the text "C: \ Program Files (x86) \ Minimal ADB and Fastboot" will appear.
7. Write the following commands without quotation marks and parentheses: "fastboot flash recovery (file name with its extension)".
Example: "fastboot flash recovery RecoveryTwrpV3.0.2.img". (without quotation marks).
8. Press "Enter or Enter" key, it will not take 1 mn to install, once finished close the window, disconnect the Phone and Restart.
Files:
Minimal_adb_fastboot_v1.3.1_setup.rar: https://mega.nz/#!fYdV0C4Y!CkdeBxpgyEc09MdJ1-WWtvI48JwXoDBrpx_ohIzT4Jc
TWRP V2: https://mega.nz/#!PBN0DAyD!NzWAX8Kn0ZtHftJZmf1_bir4OoppThMVwjP9Q6XXK9s
TWRP V3.0.0: https://mega.nz/#!LZtUnSDS!N2dFfxiK4ed5dplkt0o9lQAeAzLVgLVxgy0pXCYeOgw
TWRP V3.0.2: https://mega.nz/#!bNNRCBBY!UdXY6yWcoryK47SgV0352_JNfFLE0oIReaXDtqwWJaI
*
And that's it!
<< BACKUP >>
Instructions:
1. Turn off the Computer, Start in Recovery Mode by pressing the keys (Vol + & Power) at the same time without releasing until you enter the Recovery.
2. At the start, for the first time, a text will appear in English which says:
("Keep System as Read Only"
TWRP can leave unmodified the system partition to make it easier for you to take official updates.
Installing zips or performing adb operations can modify the system partition).
Select "Swipe to Allow Modifications" so they can install Zips or Roms or do other operations.
3. Select "Backup".
4. Check the "Cache, Boot, Data, System" boxes.
5. Press "Select Stogare", choose "MicroSDCard".
6. Select "Swipe to Backup" and wait for the process to finish, the time will depend on the size of the backup, please be patient.
And that's it!
<< ROOT ANDROID (5 & 6) >>
Instructions:
1. Download the files and save them in the SD card.
2. Start the phone in Recovery TWRP. (Vol + & Power)
3. Select Install, search for the file "BETA-SuperSU-v2.62-20151210170034.zip", and press "swipe to install", wait for the process to finish.
4. Return to the "Install" menu, look for the file "BETA-SuperSU-v2.66-20160103015024.zip", and press "swipe to install", wait for the process to finish.
5. Reboot the system. (The phone will reboot 2 times do not worry).
And ready! That would be all!
If for some reason you brickea the phone, install (flash) this file UPDATE-unSU.zip, this will solve the problem.
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLHtcITrkaA2_FpyS6CoK4fcNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67NTL_unnU4P3cE0p14Jc-tjATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMIrz3pGLwO0EM72xF-58Vv46ZNE-esov2Rbg
<< INSTALL RECOVERY STOCK >>
There are 3 methods to do it, through PC or through an App, which is very simple, here I explain how:
Method 1 - Using PC - Automatic Process:
1. Download INSTALAR RECOVERY STOCK HUAWEI P8Lite - Method Per PC.
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
4.Start your phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
5. Unzip "INSTALL RECOVERY STOCK HUAWEI P8Lite - Method Per PC" and execute the file "INSTALL RECOVERY STOCK HUAWEI P8Lite.bat" and follow the steps.
It will not take more than 5 minutes, it's just a matter of pressing ENTER, that's it!
Files:
RECOVERY STOCK: https://mega.nz/#!6E90XIYL!pHYSFN_OJKFMSmDOOhu5yFVNmh4zhS1RribCuT-9QPI
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 2 By App:
[/ B]
1.Search in the Playstore App "Flashify", Download and Install.
2.Download the Recovery Stock.
3.Start the flashify app, drop root permissions and continue.
4.Press "recovery image"> "choose a file", select the scanner of your choice, search and select the Recovery stock you downloaded.
5. Click on "Yup", wait for the process to finish.
6.The App can be closed.
Files:
STOCK RECOVERY: https://mega.nz/#!OFsAEQqD!8qr6LOM4ND6u5GB6DVqhYxEIB7OAoOSF5iOouAmM5x8
Method 3 - Using PC - Manual Process:
1. Download and Unzip the file minimal_adb_fastboot_v1.3.1_setup.rar.
2. Run the minimal_adb_fastboot_v1.3.1_setup.exe program and complete the installation steps.
3. Go to the installation path of the program "C: \ Program Files (x86) \ Minimal ADB and Fastboot" (depending on your operating system may vary).
4. Copy the recovery file that you want to install to the path mentioned above. Example: "StockRecovery.img".
5. Start your Phone in Fastboot mode: Switch off the phone and press the "vol-" key and without releasing it, connect it to the PC until the Fastboot screen appears.
6. Run the program "MAF32.exe" (located in the installation path) with or without administrator permissions, a black window with the text "C: \ Program Files (x86) \ Minimal ADB and Fastboot" will appear.
7. Write the following commands without quotation marks and parentheses: "fastboot flash recovery (file name with its extension)".
Example: "fastboot flash recovery StockRecovery.img". (without quotation marks).
8. Press "Enter or Enter" key, it will not take 1 mn to install, once finished close the window, disconnect the Phone and Restart.
Files:
Minimal_adb_fastboot_v1.3.1_setup.rar: https://mega.nz/#!fYdV0C4Y!CkdeBxpgyEc09MdJ1-WWtvI48JwXoDBrpx_ohIzT4Jc
STOCK RECOVERY: https://mega.nz/#!OFsAEQqD!8qr6LOM4ND6u5GB6DVqhYxEIB7OAoOSF5iOouAmM5x8
That is all!
<< DRIVERS EXTRAS >>
Here I leave some Extras Drivers in case the previous one does not work, the installation of each one is very simple, you just have to "next" it and restart the PC if necessary.
Files: https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
Greetings from Mordor!
I just want to remind everyone at this point, that we have TWRP 3.1.0-1, which is newer and supports backup of more important partitions. You should consider looking at the newer version, because newer most of the times means better.
The TWRP 3.1.0-1 Thread is located under Original Android Development.
Edit: No offense @JohnMillerDev7 Sharing your work over here is always awesome. The more support this phone gets, the better. Everyone needs to decide their self what they want to install, but they should know what is available. Your Tutorials are helpful for everyone that never installed TWRP.
You also should consider to update your links to newer SuperSU or even consider using magisk, so users will be able to pass safety net and hide root to various apps like PokemonGO or Super Mario Run.
@JohnMillerDev7:
I think it's better that you update your guide:
install custom recovery: remove method 2, you need root and generally to have root you already had custom recovery
add something like "update/re-install recovery (after root)" with flashify (a.e. from 2 to 3.0.2 ot to 3.1.0-1)
Do not worry, the tutorial will be updated later, thanks for the data, Regards! :highfive:
JohnMillerDev7 said:
# SUPPORT Huawei P8 Lite
Huawei P8 Lite - Install TWRP Recovery (V2, V3.0.0, V3.0.2), Full System Backup, Android Root (5 & 6) and Return to Recovery Stock - April 27, 2017 Updated.
(Works both on Android 5 and 6 with models L21 and L23).
(HiSilicon Kirin 620 processor.)
DO THIS UNDER YOUR RESPONSIBILITY!
IMPORTANT!
-If you are not sure to do this tutorial better do not do it, there is no hurry so quiet.
<< INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) >>
There are 3 methods to do it, through PC or through an App, which is very simple, here I explain how:
Method 1 - Using PC - Automatic Process:
Instructions for both versions:
1. Download INSTALAR RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
4.Start your phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
5. Unzip "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar" and run the file "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.bat" and Follow the steps
It will not take more than 5 minutes, it's just a matter of pressing ENTER, that's it!
[...]
Greetings from Mordor!
Click to expand...
Click to collapse
Thank you, it worked perfectly! I used method 1.
[DELETED] sorry
I have Huawei P8 Lite ALE-L02. which link should I use?
FAILED (remote: Command not allowed)... help me please... I used the method 3
EFECELAB: do you have bootloader unlocked ?
can I use this on the huawei p8 lite (2015) ale-l21 ? (ALE-L21C55B583).
via adb/fastboot ?
Sermog02 said:
can I use this on the huawei p8 lite (2015) ale-l21 ? (ALE-L21C55B583).
via adb/fastboot ?
Click to expand...
Click to collapse
I'm looking how to unlock the bootloader, tried a few different methods, none worked in my case (ALE-L21C55B587).
Any info on the subject is really appreciated.
Managed to unlock bootloader thanks to PotatoNV.
I then installed TWRP with the first method and it hard bricked my device.
Everything is black. Nothing. No LEDs, no rebooting, nothing. dead.
Tried disconnecting the battery with no luck.
Anything?
juansm said:
Managed to unlock bootloader thanks to PotatoNV.
I then installed TWRP with the first method and it hard bricked my device.
Everything is black. Nothing. No LEDs, no rebooting, nothing. dead.
Tried disconnecting the battery with no luck.
Anything?
Click to expand...
Click to collapse
p8 lite 2017 has a recovery mode, are you able to boot into this?
Recovery Mode HUAWEI P8 Lite 2017, how to - HardReset.info
The Recovery mode it is the hidden feature which will enable a lot of useful operation.
www.hardreset.info
You can reinstall stock rom huawei with this and retry
Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download either of the firmware from here
Download the support files (Firehose/rawprogram0.xml/patch0.xml) here
Extract the firmware and support files to the same folder so you can easily access them like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash individual partitions you can edit your rawprogram0.xml to only include the ones you want. (patch0.xml stays the same) I have linked below 2 examples, one of them flashes just a boot.img and one that just flashes the recovery.img. But you aren't limited to those.
Recovery
Boot
Mine just in case
Awesome, thanks for this post! it will really help us in upcoming projects!
Managed to revive my phone using the B12 files but it crashes after completing system.img, I think the problem is userdata.img, my phone boots but I lost the imei and I don't know how to get it back, I'm still trying.
ZTE 971 not recognized by either QPST or QFIL
Thanks for all the detailed instructions. But my ZTE 971 is not visible to either qpst or qfil eventhough the phone shows in windows 8.1. In the Developer Options menu, I noticed Select USB Configuration, RNDIS (USB ethernet) option cannot be enabled. I wonder if this has anything to do with it. OEM unlocking, USB debbugging are already selected. Any suggestions, please? Thanks.
ps. I live in Turkey. I got this phone last year from AT&T and have unlocked the sim.
My PC is not detecting my ZTE MAVEN 3
I have installed all drives but still facing the issue. I am using it on Windows 10.
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Mega says that link for the driver is invalid, but the driver is included in your QPST download anyway.
000Nick said:
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Click to expand...
Click to collapse
solucionaste hermano
Mod edit:
you solved brother
Click to expand...
Click to collapse
it says qhsusb_bulk when I connect the the software is not working in the mobile and it is stuck at bootloader screen but I used the press both buttons to go to edl mode method and it said in the device manager a device connected with name : qhsusb_bulk
help pls
Hello All.
I am not able to get the following files
rawprogram.xml and patch.xml for LG G8xPlease help me to get this files ASAP as i have hard bricked the mobile, all partitions deleted
This is a guide on how to root Maven 3 Z835. I've personally tried this using two different firmware versions: "Z835V1.0.0B13" and "Z835V2.0.0B10". Works great on both!
IMPORTANT:
=========
!!!!The ONLY partition you should be messing with is the 'boot' partition!!!! If you mess with any other partition, expect issues like.... not being able to connect to your carrier (missing IEMI).
Attachment notes:
===========
Z835V1.0.0B13_Boot_magisk_patched.img = Patched magisk boot partition image thats ready to go for firmware version "Z835V1.0.0B13" ONLY.
Z835V1.0.0B13_boot.bin - Backup of boot partition of firmware version "Z835V1.0.0B13" ONLY. Doesn't matter if the extension ends in '.bin' or '.img'.
Z835V2.0.0B10_Boot_magisk_patched.img = Patched magisk boot partition image thats ready to go for firmware version "Z835V2.0.0B10" ONLY.
Z835V2.0.0B10_boot.bin - Backup of boot partition of firmware version "Z835V2.0.0B10" ONLY. Doesn't matter if the extension ends in '.bin' or '.img'.
1. Download "Maven3_Z835root.zip" in this posts attachment.
2. Install Magisk (Magisk-v25.2.apk).
3. Boot into windows and install the edl usb drivers (QDLoaderHS_USB_Driver_64bit_Setup.exe).
4. Reboot your phone in edl mode (adb reboot edl).
5. When in edl mode, we need to make sure windows has the correct COM driver loaded for the USB interface (Qualcomm HS-USB QDLoader 9008).
A. Device manager > your android device > update driver > browse computer > pick from list > uncheck 'show compatible hardware' > Qualcomm Incorporated > Qualcomm HS-USB QDLoader 90086. Take note of which COM port its on. It will say in device manager. Ex. Qualcomm HS-USB QDLoader 9008 (COM5)
7. Install QFIL (QPST.2.7.474). QFIL is what you use to backup/flash partitions. QFIL is made by Qualcomm, this phones processor is made by Qualcomm, so thats what we are going to use to manage partitions.
8. Open QFIL
9. Check and see what your phones firmware version is. Settings>About>Build Number. If your Build Number matches mine which is "Z835V1.0.0B13" or "Z835V2.0.0B10", then congrats, you can take a huge shortcut.
BUILD "Z835V1.0.0B13" and "Z835V2.0.0B10" ONLY!!!
==================================
10. Backup your boot partition using QFIL. If we mess something up, no worries, re-flash boot partition.
A. While your phone is in edl mode, with QFIL open, QFIL should automatically detect the correct port. If not you can press 'Select Port' and pick the right one.B. Select Build Type 'Flat Build'B. Browse on 'Select Programmer' > prog_emmc_firehose_8909.mbnC. Click "Load XML". RawProgram column needs to say "rawprogram0.xml". Patch column needs to say "patch0.xml"D. Configuration > FireHose Configuration > Device Type > emmc > OK. Leave everything else to defaults.E. Tools > Partition Manager > OK.F. Right click the 'boot' > Manage Partition Data > Read Data.G. Let it finish, when its done it will export a file to the path: %Appdata%\Qualcomm\QFIL\COMPORT_5" (or whatever COM port you used). The file will be called something like 'ReadData_emmc_Lun0_0x60000_Len98304_DT_24_08_2022_19_44_43.bin'. You can rename that to boot.bin or boot.img if you like.11. Now that we have our backup, we can now actually root!
A. In 'Partition Manager' window, select 'Load Image' and browse for 'Z835V1.0.0B13_Boot_magisk_patched.img' or 'Z835V2.0.0B10_Boot_magisk_patched.img' (depending on your firmware version). Once its done, it will reboot and you have successfully rooted your phone!B. If for some reason it will not flash, its most likely because your bootloader is locked. To unlock go to Settings>Developer Options > Check 'OEM unlocking'.
OTHER BUILDS:
==========
Your goal here is to create a backup of the boot partition, then patch that backup using magisk, and install that magisk patched boot file to the phones boot partition.
1. Follow steps to backup the boot partition using QFIL in step 10 above.
2. Copy the boot partition backup file to your phone (adb push "c:\boot.bin" /mnt/sdcard)
3. Open Magisk > Install > Browse for the boot.bin. It will output a patched boot file with magisk fused with it. Ex. /mnt/sdcard/Download/magisk_patched-25200_zpqvx.img
4. Copy Patched file to your computer (adb pull "/mnt/sdcard/Download/magisk_patched-25200_zpqvx.img")
5. Now flash that magisk patched boot file to your phone (Do step 11.A. except use the boot file that we just patched)
A. If for some reason it will not flash, its most likely because your bootloader is locked. To unlock go to Settings>Developer Options > Check 'OEM unlocking'.
6. Reboot and Enjoy, you are rooted!
NEWS UPDATE:
==========
So I let AT&T Software Update (com.zte.zdm) update my phone to the latest firmware version (Z835V2.0.0B10). I then copied that boot partition, patched/flashed it back to the phone, and BAM root works.
CREDITS:
=================================================================
XDA users who have posted useful information that gave me clues as to what needs to be done.
"Erick Daves Tech" on youtube.
Some other misc websites I can't remember.
Im getting A Download Fail:Sahara Fail error when i attempt to open the partition manager. OEM is unlocked and i am in edl mode. I have installed the proper drivers from the zip file so i am not sure as to why this isnt working for me
Nevermind. I launched into EDL too early. I am root now thank you so much dude