Database Develop

[Q] IVSO case any good?

I've had the official Sony style case for a year and it's been okay. Probably doubles the weight of the tablet and it only grips the. Tablet on the corners. One of the corners has swapped off and I need a new case. The ISVO case seems to be the next most popular case. It's also a tenner cheaper than the Sony one. Can anyone compare it's quality and weight to the Sony case? Or give any comments on it's quality?
Thanks very much.
Andy

I bought this case and it lasted a week before the corner snapped off and I returned it (no I didn't drop it). I decided to buy a silicon/rubber case to replace it and bought the Poetic case, which I'm pleased with.
On the positive side, the infrared port is easier to use on this case than the Sony because the flap on the Sony gets in the way. Also, it looks better than the Sony, fits the tablet well, doesn't need a flap to hold it shut and the automatic sleep/wake works well. It's obviously not real leather, but it would probably be thicker and more expensive if it was. The problem is the plastic it's made of. It's very brittle: unlike the Sony case and that is probably why the corner snapped off mine so quickly. The case works okay as a stand, but you have to place the magnetic parts in a triangle very precisely otherwise it just falls flat, the Sony case worked better as a stand than this one.

A year later and the poetic rubber case is still going strong. I'm loving it. I also bought a cheap Sony case on ebay for when I'm out of the house as it protects the screen.
Sent from my SGP512 using Tapatalk

Supcase Water Resistant Case (Rugged)

Just got the Supcase today. It comes with 3 interchangeable back plates. The case looks like a cross between an Otterbox Defender and a Spigen Slim Armor. It comes with a built-in screen protector, but I removed the portion covering the display since I already had a screen protector installed. The top portion of the protector around the front facing camera is still present. It also has plastic protectors over the rear camera, laser auto-focus, and led flash. Similar to the front protector, they're likely easy to remove, but I chose to leave them on.
I mainly got it for the port covers since the G4 will be in dusty environments. The port covers appear to be staying in place fine. However, some people on Amazon have reported that the port covers don't stay in place with their leather-backed G4. The case has a layer of black mesh over both mics and the IR blaster. The earpiece and back speaker are also covered. Audio still comes through fine. In addition, the back buttons are covered, but they remain easy to press. Not easy enough though where you have to worry about accidental presses while in the pocket.
Keep in mind that water resistance is not the same as water proof. This case is not made to be in water. I attached some pics to this post, but more can be seen at the imgur link below.
LG G4 Supcase
Extra Info: This case does seem to work fine with a tempered glass screen protector. Without actually installing the tempered glass and just laying it over the display, the case was able to close fine.

Nice one. Tnx

How is the side grip and do you find the case significantly thicker than other cases? Thanks for the great pictures!

DarkMage619 said:
How is the side grip and do you find the case significantly thicker than other cases? Thanks for the great pictures!
Click to expand...
Click to collapse
I would say the side grip is pretty good. The tpu section along the sides has a matte finish.
At the moment, I only have two other cases for the G4. One is the Neo Hybrid and another is a thin clear tpu case. It is definitely thicker than the Neo Hybrid, but I wouldn't consider it too bulky of a case. I can still use the phone fine one-handed with the Supcase installed. I attached a pic below comparing it to the Spigen case.

That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.

BDestroyer8418 said:
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
Check out my thread on the unicorn beetle supcase. Comes with a holster. May be more inline with what you're looking for.

BDestroyer8418 said:
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
It doesn't come with a belt clip holster and I'm not sure about compatibility with other holsters. The other Supcase Mike mentions does come with a belt clip so you could check that one out. It may not provide as good protection from dust as the case I reviewed, but it's still certainly rugged.

I contacted them they said they don't sell the Holster on it own and the holster is just for the Beetle case.

BrunoSlivar said:
Nice one. Tnx
Click to expand...
Click to collapse
Here it is with the tempered glass fully installed. Case still closes fine :good:

Just wanted to say I picked this case up along with the Beetle Case that has the belt clip. The Water Resistant Case does indeed work the the Beetle belt clip it is a snug fit but it does lock down with the screen side facing in just like the Beetle. It also locks in good with the Otterbox Defender belt clip when the screen is facing in. It will not lock down with screen out on the Otterbox clip but it would be fine if you were just using the belt clip with the kickstand on a table.
Between the 2 Supcase's not sure which one I liked better will do some testing but at first I would say the Water Resistant Case I could really do without the removable back covers and rather just have something like the Beetle and that would be great. I also see on the Leather back it left 4 little marks on the bottom of the leather back. I would have to take pictures to really show what and why it caused it but it's not a big issue to me you could barley see it and I'm sure a small file would fix the issue. At first the button port cover's did not close all the way too fix that just pull on them a little and they lock in fine. I could see this becoming my daily case for work or atleast when we work outside or in really dusty conditions which is often.
Compared to the Defender it's hard to tell since I've had the Defender since Week 1 and these cases for 1 hour. Hands down the G4 Defender is the best Otterbox case I've had or seen in person. Most my friends don't use cases or they just use a slim case so I'm comparing it to my Note 2 and past phones. The fit and everything for the G4 Defender is good. The Belt clip adds a little more bulk to the overall size compared to the Beetle or Water Resistant case with the belt clips that's because the Otterbox is designed to lock the phone in both ways Face in and Face out. I never really use the belt clip with Face out unless I am using the kickstand to watch a video and 90% or more of the time I'll just hold it or lay it some other way since it's usually to vertical with the clip.
The Beetle is nice as well but I'm not sure if it just my case or if it's from the Leather back but I find the rubber shell not locking in really tight on the right side if I were to just run my finger off the side of the case it would come undone like you were trying to remove the case. Also it doesn't have that little cutout on the bottom right corner like the Water R case I found that a nice feature to remove the case. I will try again without the back to see if it helps at all. I still haven't removed the Plastic Screen protectors on these 2 cases so that might help since I already have a temper glass one on.
If I was looking right now and didn't already have the Defender then both of the Supcase's are great for similar feature's and slightly less bulk if you use a belt clip . I always use the belt clip to help protect the screen I just clip it on my pocket of my pants. Since you can get both of them for cheaper then just the Defender case it wouldn't be bad idea to get both. I also seen a few eBay sellers that had the Water R case with Free ship for about $12 were I got mine alot better than Amazon price.
I will for sure keep the Water R case but will have to decide on the Beetle in a few days. If anything I will be keeping it just for the Belt clip if I don't really like it unless Supcase will sell one or fine one for cheap but hate to keep it for the belt clip only when I bought it for $19 and the Water R case only for $12.50 even together less than $32 is not a bad deal at all. Just hate having collection of case's sitting around since I will most likely be getting a Extended Battery to use at times as well.
fast update - the beetle does fit the correct way without the leather back I will try some more with the leather back to see if it might just stretch a little over time.
Also Wireless charging working fine with all 3 case's.

Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!

emiratesson said:
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
Click to expand...
Click to collapse
Not sure about that phone but this case is really just meant for splashes of water. Basically any case that cover's the port's would be the same but this one covers up your camera lens so should help to take a little more water than other Water R case's but they should never be submerged in water .
I did find 1 issue with the case on taking pictures with a flash atleast Indoor's in low light haven't tried it elsewhere. If taking a picture in landscape with the top of the phone on left hand the bottom left corner and top right a little has a shadow to the picture's like the flash doesn't get all the way through or something hard to explain. In portrait it I did not see it happening. Also with No flash it did not happened in either mode.

il buono said:
Here it is with the tempered glass fully installed. Case still closes fine :good:
Click to expand...
Click to collapse
Can you please tell me which tempered glass screen cover you have on your LG G4? Thank you.

emiratesson said:
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
Click to expand...
Click to collapse
As I mentioned in the OP, water resistant is not the same was a water proof case. This case is not meant to be in water. As mentioned by @BDestroyer8418, this case just protects from splashes.
dgator said:
Can you please tell me which tempered glass screen cover you have on your LG G4? Thank you.
Click to expand...
Click to collapse
It's the Yootech tempered glass

il buono said:
As I mentioned in the OP, water resistant is not the same was a water proof case. This case is not meant to be in water. As mentioned by @BDestroyer8418, this case just protects from splashes.
It's the Yootech tempered glass
Click to expand...
Click to collapse
are you a reviewer that have the right to have thing to review for free ?

I have this case and the other supacase with the holster this case also fits the holster as well and clips in securely.
Sent from my LG-H815 using Tapatalk

Someone use some waterproof case with this case?
My G4 powered by Supcase with Nillkin tempered glass
powered by LG G4

Miketoberfest said:
Check out my thread on the unicorn beetle supcase. Comes with a holster. May be more inline with what you're looking for.
Click to expand...
Click to collapse
I have both cases and can confirm it small snugly into the holster it's a perfect fit
BDestroyer8418 said:
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
Sent from my LG-H815 using Tapatalk

If i take the screen protector will it lessen thw case's watsr resistance?

What cases are everyone using?

I haven't seen that many cases for this phone even on ebay or amazon. Just a handful... Which ones are you using? And how do you like them? Protection and appearance...

Havent found any good on amaxon either but if u like incepio u can check out there site they got like 4 available might be getting one.
Sent from my SM-T280 using Tapatalk

Ive moved from a z3 compact and I had the same leather case for 2 years. Great quality and decent leather. Afte comparing lots of phone sizes I took a slight risk getting this iPhone6 plus sized one
https://www.amazon.co.uk/gp/aw/d/B00NKFZYW6/ref=yo_ii_img?ie=UTF8&psc=1
Only point is I slide my Z play in downwards so it's easier to grasp when pulling it out.

I like that pouch man. Super classy. How's the fit? Is it too tight or loose?

I was expecting it to be slightly too long as the iPhone6 plus is bigger but it's perfect. After having one for my old phone the pouch never gets loose enough for it to fall out. Prefer these cases to open ones so the screen is protected as well.

Looks good man. I may pick one up! It's perfect for the off hours... I also need something for work tho.. I work in an industrial setting and while I'd love to have the phone naked I need something hardcore in case I drop it. I've seen the Incipio ones, I may get one of those I guess... You'd think with the battery life this phone has it would have been a more popular model. But it seems like not too many people are picking it up

Had to order a Nillkin case of Aliexpress, as decent cases arent available yet on local sites.

Recently ordered mine shock proof case in Ali Express
-----------------------
-UPDATE-
This is the case: https://m.pt.aliexpress.com/item/32745245264.html
It hasn't arrived yet, but I think it's pretty neat, the phone seems to fit right into the case, so it doesn't make it that extra bulky, but it doesn't also fit a Mod back there.

I don't use a case. I use protector from the Gadgetshieldz. They act as my primary protection.
http://www.gadgetshieldz.com/moto-z-play-screen-protectors-covers-cases.html

didn't use case only screen protector

Ended up picking this one up for now. Protects the camera well has a decent lip over the screen for a slim case and it's a sticky kinda rubbery plastic so it won't fly out of my hands at work. It was also nice and cheap with prime shipping.
https://www.amazon.com/dp/B01M4FL78Z/ref=cm_sw_r_cp_apa_gm9gybXDR75YJ

Are the leds in your flash of the same color/tone?

No they aren't. One is orange the other pale yellow...

Looks the same in the pics

You can see a slight difference in the first one. Color reproduction accuracy wasn't really a concern there haha

https://www.amazon.com/gp/aw/d/B01LYA7VK6/ref=yo_ii_img?ie=UTF8&psc=1
Nillkin hard shell. Protects everything except the forehead and chin edges.
Andrew

Has anyone bought this Case for Motorola Moto Z Play NILLKIN Super Frosted Shield Hard Back Cover case For Moto Z Force 5.5 inch With screen protector
http://s.aliexpress.com/mMrYbAnM
Does it protrct the camera ? Should I buy this?
Thank you.

Monkey D.Luffy007 said:
Has anyone bought this Case for Motorola Moto Z Play NILLKIN Super Frosted Shield Hard Back Cover case For Moto Z Force 5.5 inch With screen protector
http://s.aliexpress.com/mMrYbAnM
Does it protrct the camera ? Should I buy this?
Thank you.
Click to expand...
Click to collapse
Ordered it but it hasnt arrived yet, but from the looks of it there seems to be a lip around the camera bump so should offer some protection.

Angdvl089 said:
https://www.amazon.com/gp/aw/d/B01LYA7VK6/ref=yo_ii_img?ie=UTF8&psc=1
Nillkin hard shell. Protects everything except the forehead and chin edges.
Andrew
Click to expand...
Click to collapse
i'm looking for a case like this but would cover the top and bottom...

I ordered this case and tempered glass.
Both from Nillkin. I will review it as soon as I receive it.

Any recommendations on thinnest case possible... ?

I love the moto z play. Its a great size but I dont want anything bigger. Its a large 5.5'' phone comparatively.
Does anyone have any suggestions for a super thin case.
Debrand skins work well too i guess but I want to fit a small magnetic disc under it for a car mount
The style shell would be perfect if it would fit one of those metal discs under it.
Thanks in advance.
RIco

iamrico00 said:
I love the moto z play. Its a great size but I dont want anything bigger. Its a large 5.5'' phone comparatively.
Does anyone have any suggestions for a super thin case.
Debrand skins work well too i guess but I want to fit a small magnetic disc under it for a car mount
The style shell would be perfect if it would fit one of those metal discs under it.
Thanks in advance.
RIco
Click to expand...
Click to collapse
From my experience you don't need metal disc with this phone. It was designed to work with back covers with magnets built in and sticks to magnets at bottom area near metal pins with thin silicon cases.

Yeah ive tried that. The magnets are at the top around the camera hump and below the Moto mod area. There are no metal pieces in the middle of weight distribution unlike the Moto z and z force. So the phone falls off easy

Imak sandstone case or Nillkin tpu. I use both of them, and they are very thin.

[Garbage] Speck Presidio Grip, any alternative?

Greetings, mates.
I was a big fan of Speck products with all my phones since iPhone 3GS.
Week ago, bought Z2 Force and was glad to discover that Speck is producing the case for it. It is some kind of a "line refresh" and now called "Presidio Grip". The main difference over well-known CandyShell, i thought, was matte finish and rubber pattern.
But i was wrong. The main difference is awful quality of these new cases. I've read dozens of feedbacks at Amazon on this "Presidio" lineup and all of them showing extreme low quality and materials used in them.
Typical use time now is 2-3 weeks, after that rubber begins to peel off, hard outer shell begins to crack above the volume buttons etc.
I'm attaching only some of feedback photos here, all made not later than a month after the purchase. I was shocked a little, realising that in 2018 Speck is trying to sell case for $40+ with such a low quality... I can buy same "quality" garbage for less than a 2$ at Ali, really. That's definitely not what i'm expecting to obtain for such amount.
Now you really need a case to protect a $40 case, lol.
So, my question is are there any other hybrid cases for our Z2 that is not so bulky as Otterbox and is a good compromise between thickness and protection, like old Speck?

I use Spigen on my Moto Z2 Force , Google Pixel XL, iPhone 7 plus and love the fit and finish...

I actually bought the presidio grip for the Moto z2 force. It's junk and nothing like the previous ones I've had.
Have you looked at the under armour case? It has the grip like the speck. The Incipio octane does too on the sides.

blake .l said:
I use Spigen on my Moto Z2 Force , Google Pixel XL, iPhone 7 plus and love the fit and finish...
Click to expand...
Click to collapse
Spigen rugged? It is not dual-layer design, so not a variant for me. Besides, it is typical cheapest possible $1 one layer TPU case with the only difference - quality of molding.
Spigen tough is like Otterbox, too bulky and outer shell scratches very easily, showing the white plastic beneath thin paint layer.
20degrees said:
The Incipio octane does too on the sides.
Click to expand...
Click to collapse
Incipio octane is a killer for our soft aluminium back. I had same type case on my old 1st gen Atrix. When dust and sand particles goes through camera hole, whole case begin to act like a sandpaper - soft TPU sides will move just a little every time you take a phone or move it to a pocket while hard polycarbonate back will scratch the surface with that dust particles.
20degrees said:
Have you looked at the under armour case? It has the grip like the speck.
Click to expand...
Click to collapse
This is a 100% hit the bull's-eye, thank's mate, exactly what i've searched for. Dunno why i never heard such brand before. :good:

The Under Armour cases are actually made by Incipio. My biggest issue with them is the thickness. Since the Z2F is already so rugged, I'm pretty comfortable with just a slim tpu case and tempered glass. The Tech21 Evo Check can be found online for under $10 now., so I'll probably pick one of those up.

I have this case.
Moto Z2 PLAY / Z2 FORCE Case, COVRWARE [IRON TANK] Built-in [Screen Protector] Heavy Duty Full-Body Holster Armor [Brushed Metal Texture] Case [Belt Clip][Kickstand], Black https://www.amazon.com/dp/B077RMCWT5/ref=cm_sw_r_cp_apa_OTlTAb424WGZ8
It is nice if you are looking for a thin case and a holster. Slightly harder to take off for using mods. (I always pop out the plastic screen protector)
I also have this case
Spigen Rugged Armor Moto Z2 Force Case with Resilient Shock Absorption and Carbon Fiber Design for Moto Z2 Force (2017) - Black https://www.amazon.com/dp/B074BCC6K7/ref=cm_sw_r_cp_apa_hVlTAb0RY15T8
It is a simple slide in the pocket case that is easy to remove to use the mods.
Both are great cases and have held up without any problems.

Is anyone able to determine the model/manufacturer of the case on photo? Found it on glass feedback thread at amazon. Looks interesting.