Database Develop

Unfortunately, the process com.android.phone has stopped.

Hi guys I need some help. I just wiped my phone and restored it back to factory and I'm getting
Unfortunately, the process com.android.phone has stopped.
Click to expand...
Click to collapse
everytime my phone boots up. This happened as soon as it booted up right after I reset it and it's happening every single time now. It happens EVERY boot, exactly 2 times. It will freeze up my lock/home screen temporarily and give me the error message. After it displays it twice then everything goes back to normal working order and I am able to make phone calls etc.
I do think I f'd up somewhere messing with xposed installer and the wanam module. My phone would go into boot loops when I had it previously set up so this is why I reset it.
It IS rooted. Factory kernel/rom (I don't think it's possible to change them at this moment but please correct me if I'm wrong.) I tried wiping cache and still nothing. Everything in Titanium backup is defrosted meaning its all there except for the things that I uninstalled on my last setup but I was caeful not to remove anything important (only At&t bloatware). Also I did have 'App Ops X' installed and it's installed now.
So please help if you can and thanks in advance.

Fixed!!!
Not sure how exactly but I went into Titanium Backup and disabled a bunch of things that I wouldn't use. I get no errors now. Might be disabling of the 'Knox' that fixed it, who knows.

Thanks for the update,
I wasn't receiving this everytime like you were but I was getting it every so often. I tried using Titanium Backup to freeze some unwanted crap also and I haven't seen the Error since.
Don't know what we got rid of but it works lol

the_real_vlad said:
Fixed!!!
Not sure how exactly but I went into Titanium Backup and disabled a bunch of things that I wouldn't use. I get no errors now. Might be disabling of the 'Knox' that fixed it, who knows.
Click to expand...
Click to collapse
hi can you please share what you disabled
thanks

d3aded said:
hi can you please share what you disabled
thanks
Click to expand...
Click to collapse
Hi,
I can barely remember but I did remove Samsung Knox and everything with 'knox' in it. I would freeze a few things at a time that you don't think you need and keep rebooting until it's fixed. I went through many trial and errors until I finally got it 100% working.

Wiping contacts storage data usually fixes it

RErick said:
Wiping contacts storage data usually fixes it
Click to expand...
Click to collapse
Hello. I have been getting this error after installing the latest polish update to 4.4.2
I have done hard reset a couple of time but the same thing.
Any ideas?
Also how do I wipe contacts storage?

RErick said:
Wiping contacts storage data usually fixes it
Click to expand...
Click to collapse
it did not work for me either
any other ideas?

I don't know if this will help..had this issue when I used Xposed module Flying Android ....it messed up my dialer with the same message...I uninstalled it and it works perfectly now.
Sent from my SM-P600 using XDA Premium HD app

Hi severybode
i have the same : http://forum.xda-developers.com/showthread.php?t=2568386
i think this is cause of my sim card !!! cause mine is 2G , anyway , if anyone knows that witch app should i freez please let me know .
your help is appreciated
thanks

100% is a sim related problem as if i boot up phone without sim i do not get any error.
Sent from my SM-N9005 using Tapatalk

yes , you right
but is works on 4.3
is it 4.4.2. bug ?
should i report it to samsung ?

Phone not always staying rooted?

Sorry if this is a very noobish question, but I've done a pretty good amount of searching and haven't found anything. Every once in a while when I check an app like WakeLock Detector or browse Xposed modules my phone will tell me that I am not rooted. I use root checker just to double check and it confirms this. Upon reset my phone will 'go back' to being rooted. I've done a factory reset and rooted again but was still getting the same problem. Has anyone else encountered this problem?
I'm on a Sprint HTC One with 4.4.2 for the record.
To any mods: sorry if this is in the wrong place, feel free to move it or let me know where to correctly post it.

millsmillsmills said:
Sorry if this is a very noobish question, but I've done a pretty good amount of searching and haven't found anything. Every once in a while when I check an app like WakeLock Detector or browse Xposed modules my phone will tell me that I am not rooted. I use root checker just to double check and it confirms this. Upon reset my phone will 'go back' to being rooted. I've done a factory reset and rooted again but was still getting the same problem. Has anyone else encountered this problem?
I'm on a Sprint HTC One with 4.4.2 for the record.
To any mods: sorry if this is in the wrong place, feel free to move it or let me know where to correctly post it.
Click to expand...
Click to collapse
what rom are you running? (stock or custom)

cr1960 said:
what rom are you running? (stock or custom)
Click to expand...
Click to collapse
Just using the stock rom.

millsmillsmills said:
Just using the stock rom.
Click to expand...
Click to collapse
so you have 'superuser' or 'supersu' installed on your device?

cr1960 said:
so you have 'superuser' or 'supersu' installed on your device?
Click to expand...
Click to collapse
Supersu. Although I might have figured out the problem.
For some reason the binaries weren't updating correctly so I just did a clean install of it again and that seems to have done the trick. I'll update in a few days if the problem's gone away for good.

Losing Magisk Root After Reboot

Hi,
I'm running stock ROM with TWRP recovery.
I've managed to successfully root my Note with Magisk.
Somehow I noticed that my device loses root after a reboot and sometimes even randomly. When I go into the custom recovery and flash Magisk 14 or 14.3 everything works fine for while, till it loses root again.
Could someone shed some light on my issue, please?
Thanks in advance.
I've also themed Magisk Manager with Substratum could that be the issue?

I'm also running stock rom, losing magisk root from time to time.
When root is lost, I'm getting a notification that "new magisk V14 is available.
Reinstalling with TWRP only to lose it again a day or two later.

You all need to change your settings in magisk manager. I had the same problem. Change your update channel to Beta. This will keep magisk 14.3 installed once you flash it in recovery after setting this. :highfive:

Are you using the hide root feature?
If so then that is probably your issue.

opasha said:
You all need to change your settings in magisk manager. I had the same problem. Change your update channel to Beta. This will keep magisk 14.3 installed once you flash it in recovery after setting this. :highfive:
Click to expand...
Click to collapse
This worked for me, thank you!!

ALEXRUSS55 said:
This worked for me, thank you!!
Click to expand...
Click to collapse
Welcome :highfive:

jpasint said:
Are you using the hide root feature?
If so then that is probably your issue.
Click to expand...
Click to collapse
What issue does this cause?

I have the same issue with last magisk beta, 16.4.. have anyone found a fix?

stiffis said:
I have the same issue with last magisk beta, 16.4.. have anyone found a fix?
Click to expand...
Click to collapse
Flash magisk v16.4, then open magisk manager disable magisk hide, for keep your root

kenpaci said:
Flash magisk v16.4, then open magisk manager disable magisk hide, for keep your root
Click to expand...
Click to collapse
Looks like that worked, thanks!

stiffis said:
Looks like that worked, thanks!
Click to expand...
Click to collapse
But it losses Android pay. Anyone with other solution to keep root and hide it?
Best regards
Webgurru

webgurru said:
But it losses Android pay. Anyone with other solution to keep root and hide it?
Best regards
Webgurru
Click to expand...
Click to collapse
Try disabling MagiskHide and re-enable it again (try also with a reboot between disabling and enabling)

stiffis said:
Try disabling MagiskHide and re-enable it again (try also with a reboot between disabling and enabling)
Click to expand...
Click to collapse
If I disable it, won't secure apps that run in the background pick up root? I'm guessing I should freeze them first or something?

hshah said:
If I disable it, won't secure apps that run in the background pick up root? I'm guessing I should freeze them first or something?
Click to expand...
Click to collapse
Try closing those apps first, I think it goes ok as long you don't start the apps yourself because most off the apps checks root at startup, but I can't guarantee you anything

Something weird has happened... I've not actually changed anything but now I tend to lose root immediately after rebooting.
I'm a technical person so whilst I say nothing has changed, I know that it probably has and I just can't remember.
I need Hide, so disabling that is not an option... I have no idea where to even start debugging this
Sent from my Samsung Galaxy Note 8 using XDA Labs

hshah said:
Something weird has happened... I've not actually changed anything but now I tend to lose root immediately after rebooting.
I'm a technical person so whilst I say nothing has changed, I know that it probably has and I just can't remember.
I need Hide, so disabling that is not an option... I have no idea where to even start debugging this
Sent from my Samsung Galaxy Note 8 using XDA Labs
Click to expand...
Click to collapse
Hi,
Same thing happening to me. Lost root soon after restart. I need it hide. Any genius mind can suggest some solution?
Best regards,
Webgurru

webgurru said:
Hi,
Same thing happening to me. Lost root soon after restart. I need it hide. Any genius mind can suggest some solution?
Best regards,
Webgurru
Click to expand...
Click to collapse
I've been posting my analysis here:
https://forum.xda-developers.com/apps/magisk/unofficial-magisk-v10-beta-built-t3521901
We have some smart guys (ie @topjohnwu @Didgeridoohan @kantjer etc) and I don't know enough to sort this so the least I can do is provide as much information as possible

hshah said:
I've been posting my analysis here:
https://forum.xda-developers.com/apps/magisk/unofficial-magisk-v10-beta-built-t3521901
We have some smart guys (ie @topjohnwu @Didgeridoohan @kantjer etc) and I don't know enough to sort this so the least I can do is provide as much information as possible
Click to expand...
Click to collapse
Any luck or help from this thread to resolve?

webgurru said:
Any luck or help from this thread to resolve?
Click to expand...
Click to collapse
Only been spamming the thread with my woes since yesterday so still early days. I'm certainly not expecting an immediate fix because this has been going on for quite some time and if it was easy, we wouldn't be having this conversation.

hshah said:
Only been spamming the thread with my woes since yesterday so still early days. I'm certainly not expecting an immediate fix because this has been going on for quite some time and if it was easy, we wouldn't be having this conversation.
Click to expand...
Click to collapse
Thanks. In my point of view this look to be a bug in Magisk. Did you tried some older version?

OnePlus 5 Safetynet issues

Hai.
Yesterday I rooted my device with all latest versions and everything went pretty well. Then when I checked Safetynet check, there was an error on the "CtsProfile" and the second one was okay. Then I tried all those methods including modules, tweaking settings, installing universal fixes and even extras like USB debugging etc etc but nothing worked.
I've used these versions of apps:
platform-tools_r29.0.6-windows
Magisk-v20.3
twrp-3.3.1-0-cheeseburger
MagiskManager-v7.5.1
Other things I noted:
Just to check I downloaded Pokemon GO, it works for some time like for 2 minutes, when you log in and then gives error of the device.
Similarly I tried another app one first launch it said not compatible with the device and then I closed. After some time, I opened and it was working fine.
Plus, hiding from #Magiskhide doesn't affect these behaviors.
So, I want someone to help me with this, because I've tried almost all of the troubleshooting things.
Thank you!

It's a good idea to be a bit more detailed... For example, what does this mean?
Then I tried all those methods including modules, tweaking settings, installing universal fixes and even extras like USB debugging etc etc but nothing worked.
Click to expand...
Click to collapse
What modules, tweaks, universal fixes and extras are you talking about?
And I'm assuming you've checked here already:
https://didgeridoohan.com/magisk/MagiskHide#hn_SafetyNet
If it's just CTS that's failing, it's usually caused by using an uncertified device/ROM and can most of the time easily be circumvented by using a certified device's fingerprint. Is this one of the things you've tried? If not, give my MagiskHide Props Config module a go.

Didgeridoohan said:
It's a good idea to be a bit more detailed... For example, what does this mean?
What modules, tweaks, universal fixes and extras are you talking about?
And I'm assuming you've checked here already:
https://didgeridoohan.com/magisk/MagiskHide#hn_SafetyNet
If it's just CTS that's failing, it's usually caused by using an uncertified device/ROM and can most of the time easily be circumvented by using a certified device's fingerprint. Is this one of the things you've tried? If not, give my MagiskHide Props Config module a go.
Click to expand...
Click to collapse
Oh, I'm so stupid I didn't completed that terminal step fully. I thought it would be automatic, meh. Thank you a lot. It's fixed.
Now that the Safetynet check is whole working but does it change anything? Like, I tried Pokemon Go now, but it still says device, OS or software is not compatible. Why is that? I mean, if it's only for Pokemon Go, then I guess it's okay because I'm not really a fan of it.
But if it's same for other apps in future, what should I do next to fix this?
Regards.

Usmankhan.1996 said:
Oh, I'm so stupid I didn't completed that terminal step fully. I thought it would be automatic, meh. Thank you a lot. It's fixed.
Now that the Safetynet check is whole working but does it change anything? Like, I tried Pokemon Go now, but it still says device, OS or software is not compatible. Why is that? I mean, if it's only for Pokemon Go, then I guess it's okay because I'm not really a fan of it.
But if it's same for other apps in future, what should I do next to fix this?
Regards.
Click to expand...
Click to collapse
That's great. If I remember correctly, PoGo is also detecting stuff like Titanium Backup or TWRP folders on your device.

Didgeridoohan said:
That's great. If I remember correctly, PoGo is also detecting stuff like Titanium Backup or TWRP folders on your device.
Click to expand...
Click to collapse
So is there any solution for that?

Usmankhan.1996 said:
So is there any solution for that?
Click to expand...
Click to collapse
Delete/rename the folders, whatever is more convenient. They same might apply for any Magisk folders or files you have saved on your device.

Didgeridoohan said:
Delete/rename the folders, whatever is more convenient. They same might apply for any Magisk folders or files you have saved on your device.
Click to expand...
Click to collapse
Okay thanks!
One last thing please. How can I remove that warning every time I load my phone, saying "bootloader is unlock device integrety cannoy not be guaranteed. Any data stored on this device etc..." Is there any way to remove that, because it's really annoying and I don't think it's good if you wanna sell your phone in future to someone...

Usmankhan.1996 said:
Okay thanks!
One last thing please. How can I remove that warning every time I load my phone, saying "bootloader is unlock device integrety cannoy not be guaranteed. Any data stored on this device etc..." Is there any way to remove that, because it's really annoying and I don't think it's good if you wanna sell your phone in future to someone...
Click to expand...
Click to collapse
As far as I know, you can't. Not without locking the bootloader, which you shouldn't do on a modified system (you'll risk bricking the device, permanently).
If you're going to sell your device it would be a good idea to go back to full stock anyway, and then you can lock the bootloader and the message would go away.

My new poco x3 is really unstable after installing magisk? Can anybody help me?

So i have a poco x3 nfc that keeps rebooting, and i don't mean bootloop sometimes it's rebooting and also i cannot open apps, since this is my new phone im really panicking so please help me.

It's most likely an app that causes this issue, try uninstalling the apps that you don't need - especially apps that require root permission - and if the problem is solved then it's one of the apps.
You can try denying root permission to the apps that require it and wait for 1 or 2 days.

uhhhh it's new, the only app that needs root is termux

thameme said:
uhhhh it's new, the only app that needs root is termux
Click to expand...
Click to collapse
It's still an app, if you didn't notice... And I said all apps, not just root apps.
Also some system apps can cause this. Remember that your device isn't supposed to be rooted.

yeah but what should i delete?

oh it just rebooted

thameme said:
yeah but what should i delete?
Click to expand...
Click to collapse
How should I know? Try booting to safe mode.

how do i do that :/ sorry im not an expert

thameme said:
how do i do that :/ sorry im not an expert
Click to expand...
Click to collapse
You can search google for exact way.
But generally it's hold power button with volume down for about 10 seconds.

ok im in safe mode

now what do i do?

also wifi isn't turning on

thameme said:
now what do i do?
Click to expand...
Click to collapse
Wait and see if your phone reboots.
Man, why root when you're so incompetent? If you want to get free WiFi so much just go to a cafe.

All the apps work in safe mode and also no, it's not rebooting

thameme said:
All the apps work in safe mode and also no, it's not rebooting
Click to expand...
Click to collapse
how about wifi?

nope does not work

only mobile data is working

Sistem ui just crashed

its back now

oh nvm i fixed it