[ROM][10][UNOFFICIAL][TEST] Resurrection Remix 8.0.0 [polaris][25/09/19]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Ten
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.
Flash latest firmware via TWRP (preferably china based)
Make sure you have a custom recovery installed (TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM
GApps
Resurrection Remix SourceDevice SourceKernel SourceVendor Source
@Wooby , @argraur , @oiprXDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
Turn off AOD after flashing, not turning it off results in black screen and no reaction.
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
TWITTERGITHUBGOOGLE PLUSFACEBOOKTELEGRAM
XDA:DevDB Information
Resurrection Remix 8.0.0 Ten, ROM for the Xiaomi Mi Mix 2S
Contributors
DahakePL
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2019-09-25
Last Updated 2019-09-25
Reserved
Got some errors with the linked gapps package (claims it's for android 4.4 -> Throws error 20). Got another gapps package and it seems to work now.
Edit: After setting up everything, everything appears to work perfectly.
I just cannot find the Resurrection Remix settings menu? Am I missing something?
Edit 2: Have some apps that crash, but that probably has to do with buggy gapps more than with the rom itself (e.g. digital wellbeing always crashes when I open it)
Edit 3: The camera works (both stock and gcam), but I cannot make videos, only pictures. Phone crashes to homescreen/"Can't connect to camera" error when I tap the record button.
just flashed this ROM
no customize option，no google feed and there's Android ICS style search bar on the launcher, looks weird.
so far so good, need to continue to observe it
Cytion said:
just flashed this ROM
no customize option，no google feed and there's Android ICS style search bar on the launcher, looks weird.
so far so good, need to continue to observe it
Click to expand...
Click to collapse
It's too fresh to have anything just like other roms, but it's being worked on so keep an eye on the updates.
dirty flash from rr7 to rr8 does work and only just not recommended, or does the phone just bootloop?
futureshock said:
dirty flash from rr7 to rr8 does work and only just not recommended, or does the phone just bootloop?
Click to expand...
Click to collapse
Not recommended, might bootloop. Keep in mind that this build is pretty much clean and customizations are yet to be implemented.
DahakePL said:
Not recommended, might bootloop. Keep in mind that this build is pretty much clean and customizations are yet to be implemented.
Click to expand...
Click to collapse
i've tested dirtyflash above rr7 now.. it won't even bootloop... it just's reboots into twrp again... but also after wipe data, cache and dalvik it just reboots back into twrp.... anything i'd miss?
i've tested with twrp 3.3.0 and 3.3.1 too now..
wipe of userdata (Media) also needed?
futureshock said:
i've tested dirtyflash above rr7 now.. it won't even bootloop... it just's reboots into twrp again... but also after wipe data, cache and dalvik it just reboots back into twrp.... anything i'd miss?
i've tested with twrp 3.3.0 and 3.3.1 too now..
wipe of userdata (Media) also needed?
Click to expand...
Click to collapse
Did you wipe system ?
also try to update your FW and dont flash vendor since its included
So after full wipe rr8 started now finally..
Tried Rooting with magisk 19.4 but does not work, either no root, or bootloop
Need magisk hide to hide custom Rom from my banking. APP... Or is there any other solution for this issue?
futureshock said:
So after full wipe rr8 started now finally..
Tried Rooting with magisk 19.4 but does not work, either no root, or bootloop
Need magisk hide to hide custom Rom from my banking. APP... Or is there any other solution for this issue?
Click to expand...
Click to collapse
Here, latest canary now supports Android 10 SAR with A partition
https://github.com/topjohnwu/magisk_files/blob/canary/magisk-release.zip
DahakePL said:
Here, latest canary now supports Android 10 SAR with A partition
https://github.com/topjohnwu/magisk_files/blob/canary/magisk-release.zip
Click to expand...
Click to collapse
Many thx, ive tested 19.4 from beta channel that supposed to have Android 10 Support... The canary Version 19.5 does indeed work!
Btw. I still get some FC when swiping on Stock keyboard, also the Digital wellbeeing setting forcecloses...
Everything Else looks quite fine... Really miss the rr settings for Customizing... Wouldnt it be possible to include the one from Android 9? Of. Course Not Everything would work? I guess "offical" RR Team didnt Releases an Android 10 build because of that the options are still not available?!
futureshock said:
So after full wipe rr8 started now finally..
Tried Rooting with magisk 19.4 but does not work, either no root, or bootloop
Need magisk hide to hide custom Rom from my banking. APP... Or is there any other solution for this issue?
Click to expand...
Click to collapse
Try magisk canary (v19.5)
futureshock said:
Many thx, ive tested 19.4 from beta channel that supposed to have Android 10 Support... The canary Version 19.5 does indeed work!
Btw. I still get some FC when swiping on Stock keyboard, also the Digital wellbeeing setting forcecloses...
Everything Else looks quite fine... Really miss the rr settings for Customizing... Wouldnt it be possible to include the one from Android 9? Of. Course Not Everything would work? I guess "offical" RR Team didnt Releases an Android 10 build because of that the options are still not available?!
Click to expand...
Click to collapse
RR team still hasn't added any features from Android 9 because it isn't as simple as copy and paste :silly:
They surely need more time.
Is there any bug with dual sims in the AOSP 10 builds?
I have 2 sims. One sim works normally, my other sim acts strangely:
- Data works normally
- SMS appears to work normally
- Outgoing calls work normally
- Incoming calls often give a busy signal. But after having made an outgoing call, they come in normally. They go back to a busy signal after a reboot. (not consistently, sometimes even after outgoing calls, the incoming calls keep getting a busy signal)
I have tried to reflash stock MIUI and the problem does not appear. Did a full wipe (wipe data -> Yes) and reinstalled RR8.0 and the problem reappears.
Any idea?
- I have contacted my provider and they claim it's a phone issue, not a provider issue.
- Have tried with VOLTE on and off
- Have tried multiple combinations of preferred network
-> Hit and miss, sometimes calls connect, most often I get a busy tone calling my phone.
Firipu said:
Is there any bug with dual sims in the AOSP 10 builds?
I have 2 sims. One sim works normally, my other sim acts strangely:
- Data works normally
- SMS appears to work normally
- Outgoing calls work normally
- Incoming calls often give a busy signal. But after having made an outgoing call, they come in normally. They go back to a busy signal after a reboot. (not consistently, sometimes even after outgoing calls, the incoming calls keep getting a busy signal)
I have tried to reflash stock MIUI and the problem does not appear. Did a full wipe (wipe data -> Yes) and reinstalled RR8.0 and the problem reappears.
Any idea?
- I have contacted my provider and they claim it's a phone issue, not a provider issue.
- Have tried with VOLTE on and off
- Have tried multiple combinations of preferred network
-> Hit and miss, sometimes calls connect, most often I get a busy tone calling my phone.
Click to expand...
Click to collapse
i've tested this... i don't have an issue... at least with a few couple of tries only... also right after reboot of phone it worked!
futureshock said:
i've tested this... i don't have an issue... at least with a few couple of tries only... also right after reboot of phone it worked!
Click to expand...
Click to collapse
Thx for trying. Guess I'll keep looking for possible causes.
Firipu said:
Thx for trying. Guess I'll keep looking for possible causes.
Click to expand...
Click to collapse
did you changed the bands used for the sims? i've had issues in rr7 too when using default settings... i've changed to global and got fewer drops in calls when on the road... (some weired issue i've and ah couple of other users have with all sorts of rom, especially with the xiaomi.eu rom!!)
futureshock said:
did you changed the bands used for the sims? i've had issues in rr7 too when using default settings... i've changed to global and got fewer drops in calls when on the road... (some weired issue i've and ah couple of other users have with all sorts of rom, especially with the xiaomi.eu rom!!)
Click to expand...
Click to collapse
Never changed the bands as far as I know (not sure how I would do that). Flash a different radio/firmware?
"Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution"
Sorry, I don't understand "Full factory wipe"
Normally I wipe system, data, cache, dalvik cache. Is that enough? Or is it necessary to wipe internal storage or do "format data"?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Note This Rom Only For Xiaomi Redmi 4A A.K.A (rolex) .
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. Based on LineageOS with extra goodies.
Welcome to the new beginning! This topic will be dedicated to our bring up of PIE for Redmi 4A. Sincere thanks to LineageOS team for the rom base sources.
These are BETA builds. They aim to serve base for feature addition. If you face any force close, you need to provide log to get it resolved. Make sure to keep eye on this post and latest discussions in this topic to help yourself.
Features
Click for feature list
What's working :
Boots
Double tap to wake-up
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte (First Sim slot only)
Known issues:
stock Camera app not good for daily use
Sim card settings reset every Reboot
Downloads :
ROM
Gapps (arm64)
Flashing Instruction :
Always Have a full functional Backup. Just in case!
[*]First time installing crDroid to your Redmi 4A, or coming from another ROM:
** Make sure you're running a proper working Recovery ( TWRP) Treble supported
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, dalvik cache , vendor & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
[*]Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
You need to flash GApps every-time you flash the ROM.
Don't expect any support if you:
are not running the included kernel
have installed any mods such as Xposed!
have modified system files
Follow us on crDroid G+ community
Join our official telegram group of rolex : Click Here To Join
XDA:DevDB Information
Crdroid-pie, ROM for the Xiaomi Redmi 4a
Contributors
muralivijay, RiteshSaxena , haran2003
Source Code: https://github.com/muralivijay/android_kernel_xiaomi_msm8917.git
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui Nougat
Based On: Lineage OS
Version Information
Status: Beta
Current Beta Version: V5.0
Beta Release Date: 2018-10-04
Created 2018-10-05
Last Updated 2018-10-05
Reserved
Is the source is in beta stage or ur making beta builds
Is there any solution for device decryption unsuccessful error im also getting this error other Pie roms as well. :crying:
athish said:
Is there any solution for device decryption unsuccessful error im also getting this error other Pie roms as well. :crying:
Click to expand...
Click to collapse
try wipe Data after install this rom
Hi, thanks, but I have one big question, because weeks and weeks i don´t know answer and solutions!
When I have Redmi 3, flashed custom ROM every week with classic TWRP and everything working fine, but now, with rolex 4A, every custom Oreo and Pie ROM, excluded ResurrectionRemix (it is interesting), broke after flash sensors gyroscope and accelerometr (display not rotate!) and sensors tool apk said "No service". Only one solution, how fix it is EDL flash with fastboot ROM in MiFlash on PC, it is only way, how full repair sensors (not working with fastboot mode in miFlash, only EDL!). For me not working delete file from persist folder.
Is somebody, who know reason, why is it?
Is necessary using some different TWRP or doing something another?
Because I don´t see here much another users with this problem and its very exhausting every flash must return to MIUI in EDL mode on PC. With every ROm I hope, but result is the same
(but With resurrection remix working rotation correctly! Why?
Thanks for answers.
LordyAndry said:
try wipe Data after install this rom
Click to expand...
Click to collapse
thanks it worked:good:
athish said:
Is there any solution for device decryption unsuccessful error im also getting this error other Pie roms as well. :crying:
Click to expand...
Click to collapse
Dose the phone ask you for pattern on boot ?
If yes, go to TWRP -> Wipe -> Format data
Then type yes
Devan Khandagale said:
Dose the phone ask you for pattern on boot ?
If yes, go to TWRP -> Wipe -> Format data
Then type yes
Click to expand...
Click to collapse
thanks for the reply got it to work :good:
Thank you for this awesome ROM: it works very fine! Reading mode tile, Gcam woks, good signal strenght, battery life, notification lights, only works very well form me. Little error: I have an internal error message, when turn on the device and UI is loaded, but it has no effect on the operation of the phone.
Yesrab Ali said:
Is the source is in beta stage or ur making beta builds
Click to expand...
Click to collapse
Source in beta stage. So beta release
SalvoP73 said:
Thank you for this awesome ROM: it works very fine! Reading mode tile, Gcam woks, good signal strenght, battery life, notification lights, only works very well form me. Little error: I have an internal error message, when turn on the device and UI is loaded, but it has no effect on the operation of the phone.
Click to expand...
Click to collapse
Fix soon
SalvoP73 said:
Thank you for this awesome ROM: it works very fine! Reading mode tile, Gcam woks, good signal strenght, battery life, notification lights, only works very well form me. Little error: I have an internal error message, when turn on the device and UI is loaded, but it has no effect on the operation of the phone.
Click to expand...
Click to collapse
Version for Riva has the same error
Tested Cr-Droid
Unstable Mobile Network
Too much battery consumption
Camera is too bad, Gcam not working
Notification details not visible when using Amoled Wallpaper(Deep Grey)
Charging Icon even after charge is removed.
Please Fix these, Rest everything is Amazing, from Ad-block to the customization and the internal apps , No more Spaces in status bar
Best ROLEX PIE Custom ROM
Can't connect to wifi when signal hidden by router even SSID, security option and password are correct
*Sorry my bad English ?
Does anyone have changelog for newest version ?
Changelog for newest version plz?
pixel launcher stutters when scrolling through the app drawer. other modded pixel launchers (ex lawnchair) also exhibits that behavior
This rom runs really well for me and now that the 25/10 build allows the camera to save to SD card that's even better. The only thing I noticed when taking photos and videos and they save to the SD card is, they save to a folder called org.lineageos.snap which creates itself in Android > data folder and doesn't send the photos or videos to the camera folder. In turn when opening the gallery the photos or videos now in the org.lineageos.snap folder don't appear, but strangely when viewing the photos from the camera app itself you can view the photo in gallery. I experimented with moving and deleting the org.lineageos.snap folder, but when the camera is open it says it cannot read the path to SD card, so the camera seems to rely on the org.lineageos.snap folder being on the SD card
NEW!! - April build release post here - https://forum.xda-developers.com/showpost.php?p=82365485&postcount=132
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!
Android 10 is now Pure AOSP! For our pleasure. :victory:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Beta Release: Version 15.0
Download link: HERE!!
Clicking Thanks button below this post will show appreciation for the upkeep of these files.
Google Apps:
ALREADY INCLUDED!
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
CRT Animation causes soft-reboot (just don't use it)
In-call Volume stuck on high currently.
Bluetooth occasionally causes a forced reboot.
...You tell...
FAQ:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page. <<< This way is the easiest!
The ROM should contain everything you need to enjoy Android 10. You don't need to install any Add-on's, simply download the latest ROM, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip. We recommend Magisk!
It is STRONGLY recommended to fully wipe your device before flashing if you're coming from a different ROM and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug. Once you're on AICP you can dirty flash new builds without wiping anything, unless stated otherwise!
-----
How to flash for the first time:
(Again: Don't do it if you don't know it!)
If you've got everything nice and backed up:
1. Fastboot -w (not usually necessary, this will wipe data and internal as well as format to ext4 and remove any encryption).
2. Fastboot flash boot "twrp boot.img". Use the F2FS TWRP image linked here - F2FS TWRP Boot). Reboot to recovery (on the phone).
3. In TWRP - wipe System, Data, and Dalvik. OR do a full wipe including Internal Storage, if you want to switch to F2FS and go Decrypted which is Recommended!). You'll have less hassle with dirty flashes later, but your phone may be less secure. Whichever way you look at it, its your decision!
[*]NOTE - Its recommended to format to F2FS file system at this stage before flashing ROM. However, not essential!
[*]Change filesystem: Go into Wipe > select Data > Change Filesystem > F2FS
(I believe encryption won't work if you switch to F2FS, so only do it if you're okay with that).
4. Transfer the ROM zip and the TWRP installer zip to your SDCARD.
5. Flash the ROM zip and the TWRP zip (FYI, flashing a ROM by any method will install to the opposite slot, the TWRP zip patches both slots).
6. Reboot to recovery (Reboot > Recovery), ignoring when it says "No OS Installed" (this will automatically switch slots for you).
7. Back in TWRP - transfer the latest Magisk zip to your SDCARD and flash it. (Magisk always installs to the current slot).
8. Reboot to system. It will fail to boot once because of Magisk, that's normal just let it do its thing.
9. Go through setup.
10. Enjoy the ROM!
NOTE: If coming from AICP Pie it's still recommended to make a FRESH START!
The ROM has GApps built in, so you don't need to flash them! There is no GAppless option.
-----
Currently supported Root Solution:
Magisk stable
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/celtare21/kernel_essential_msm8998-1
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
Contributors:
CamoGeko (Me)
KuranKaname (DaBoss)
All you PH-1 guys! (for testing and using the fastest/smoothest ROM on Essential Phone) - Thank you!
This ROM is free to use as everything should be on XDA, just click Thanks if you appreciate the work.
Happy 2020!!
Screenshots:
HERE!!
Theme - Valerie
Icons - Outline Icon Pack (find here on XDA!)
Launcher - Lawnchair Q pre-alpha + QuickSwitch 3.0.0
XDA:DevDB Information
Unofficial AICP 15 Q Beta, ROM for the Essential Phone
Contributors
CamoGeko, KuranKaname
Source Code: https://github.com/celtare21/kernel_essential_msm8998-1
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: N/A
Based On: Pure AOSP
Version Information
Status: Beta
Current Beta Version: 15.0
Beta Release Date: 2020-01-05
Created 2020-01-06
Last Updated 2020-04-23
YOUR MATA CUSTOMIZATION STATION!
-------
F2FS Boot (if you want to full wipe and convert to F2FS):
F2FS Boot image
TWRP Installer zip (to be flashed after flashing the ROM):
TWRP Installer
Latest NOVENDOR images:
Firmware Collection (Novendor)
Gcam that I use:
HyperCam_R6_Q_GAMMA
Launcher:
Lawnchair-q_pre_alpha_2599
Lawnfeed (needed for Google Now):
Lawnfeed-2.1-2598
QuickSwitch (for Recents):
QuickSwitch_(Android_Pie+)-v3.0.0(300)
avFonts by @Lupin The Third (Magisk modules):
Magisk system-wide fonts
Migrate v2.1 (to move your apps):
Migrate_Release_2.1
ViperFX:
ViperFX-V2.7.1.0 apk | | | v4afx_v2.7.1.0 zip
YouTube Vanced (Magisk module):
YouTube_Vanced_black_themed_-_Magisk_Repo-v14.21.54(b01.40.20)
---
Will add more later... have fun!!
Camo.
CamoGeko said:
FOR YOUR PLEASURE:
Gcam that I use:
HyperCam_R6_Q_GAMMA
Launcher:
Lawnchair-q_pre_alpha_2599
Lawnfeed (needed for Google Now):
Lawnfeed-2.1-2598
QuickSwitch (for Recents):
QuickSwitch_(Android_Pie+)-v3.0.0(300)
Migrate v2.1 (to move your apps):
Migrate_Release_2.1
Will add more later... have fun!!
Camo.
Click to expand...
Click to collapse
Thanx bro keep testing
This is the most put together ROM for the essential phone on Android 10 that I have found. Great job. I did see in the list of features that there is supposed to be a one-handed mode I can't seem to find that anywhere. Could someone point that out where to locate it? This ROM works seamlessly with Magisk 20.2 and Viper4Android intalls without having to do a weird workaround to get its drivers going. I do get a notication that my Bluetooth isn't functioning sometimes. I go into TWRP, clean the cache and reboot. The Bluetooth warning goes away and Bluetooth works fine.
Navigation is blank
The rom perfect but i open navigation on Aicp extras is blank. Thank you.
NICE!
Is the Custom Volume Steps feature implemented yet? Saw it on the app, but am not seeing it in the settings
silverkun146 said:
The rom perfect but i open navigation on Aicp extras is blank. Thank you.
Click to expand...
Click to collapse
Strange, it works perfectly fine for me here...
Can you screenshot?
Chinese people need gappless
---------- Post added at 05:04 AM ---------- Previous post was at 04:59 AM ----------
slimGK said:
Chinese people need gappless
Click to expand...
Click to collapse
GApp waste too much bettery and google can not use in china
Probably my fault
I will try flash
How to close the rounded corners around the screen
slimGK said:
Chinese people need gappless
---------- Post added at 05:04 AM ---------- Previous post was at 04:59 AM ----------
GApp waste too much bettery and google can not use in china
Click to expand...
Click to collapse
You can always build it yourself
The Screen Off Animation "CRT" (AICPExtras-Animations-Screen off Animation) causes a UI restart. When CRT is selected, each time I push the Power button, I get the boot animation and the start up loading.
Also, here'e the Nav screen pic
nijohnson said:
The Screen Off Animation "CRT" (AICPExtras-Animations-Screen off Animation) causes a UI restart. When CRT is selected, each time I push the Power button, I get the boot animation and the start up loading.
Also, here'e the Nav screen pic
Click to expand...
Click to collapse
Known issue about CRT, look under "Known Issues" in the OP. Its right there.
Thanks for the Navigation screenshot I hadn't seen that, because I have no need to go there.
Currently there are no options for Navigation within AICP Q right now it seems, but you dont really need them. Just go to System - Gestures and everything you need is there, if you want more customization then use a custom Launcher like the one from Post 2. Problem solved. :good:
Thanks! Sorry I missed the CRT known issue.
Thx for the wonderul ROM. One of the best I've ever tried.
I've found 2 issues only:
-Everything is very fluent until scrolling/swiping becomes very slow for moments (seconds). It just comes and goes. It can be noticed when you try to swipe/scroll on the launcher or the notifications panel.
-It happened to me today that after using the gcam you posted for a while (in night mode) at some point the phone started to reboot every time I tried to take a photo. This issue was persistent between reboots and regardless of the camera app being used. The funny thing is that the issue disappeared after a while and then it came back. So looks like the camera needs to "cool off" after taking several pictures in a row.. weird
Again, thanks for the great work
monstercamf said:
Thx for the wonderul ROM. One of the best I've ever tried.
I've found 2 issues only:
-Everything is very fluent until scrolling/swiping becomes very slow for moments (seconds). It just comes and goes. It can be noticed when you try to swipe/scroll on the launcher or the notifications panel.
-It happened to me today that after using the gcam you posted for a while (in night mode) at some point the phone started to reboot every time I tried to take a photo. This issue was persistent between reboots and regardless of the camera app being used. The funny thing is that the issue disappeared after a while and then it came back. So looks like the camera needs to "cool off" after taking several pictures in a row.. weird
Again, thanks for the great work
Click to expand...
Click to collapse
It happens to me as well. Thing is GCam takes a lot of processing power, it also happens on stock if you start taking pictures on low battery. Phone will just die. Don't know if something that can be fixed, could be a problem with GCam itself, or something in the kernel that messes **** up and makes the phone think that it has no battery.
Only fix I could find is using nonHDR photos when phone has 30% or less battery. Non HDR photos look terrible though.
feligoni said:
It happens to me as well. Thing is GCam takes a lot of processing power, it also happens on stock if you start taking pictures on low battery. Phone will just die. Don't know if something that can be fixed, could be a problem with GCam itself, or something in the kernel that messes **** up and makes the phone think that it has no battery.
Only fix I could find is using nonHDR photos when phone has 30% or less battery. Non HDR photos look terrible though.
Click to expand...
Click to collapse
Good to know. Thanks for the tip. However in my case I still had 70% of the battery left, but it could be that I was making a very intensive use of the phone because of the low light mode.. Very strange.
So far I have been liking the ROM a lot except for one big issue: whenever I install magisk, Wifi and Bluetooth are completely disabled. Reinstalling the ROM without it fixes the issue, but now I dont have a rooted phone. Any idea what I'm missing?
xeta8 said:
So far I have been liking the ROM a lot except for one big issue: whenever I install magisk, Wifi and Bluetooth are completely disabled. Reinstalling the ROM without it fixes the issue, but now I dont have a rooted phone. Any idea what I'm missing?
Click to expand...
Click to collapse
No problems here. What Magisk are you using? Stick to official releases.
feligoni said:
No problems here. What Magisk are you using? Stick to official releases.
Click to expand...
Click to collapse
I am trying to use the latest stable release which is v20.3
EDIT: I got it working. My mistake was assuming the twrp img I used when first installing the ROM was all I needed, and I did not use the TWRP installer zip from their website. Everything is working now after actually using the installer zip.
[10.0][OFFICIAL]Resurrection Remix v8.6.2 [STARLTE/STAR2LTE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package (NANO)(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download S9+
ROM Download S9
GApps
Resurrection Remix Source
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
Join our Telegram support chat : https://t.me/rros9810
ADVANCED RESTART IN POWER DIALOG
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
Show your support to Resurrection Remix ROM
© 2020 GitHub, Inc.
XDA:DevDB Information
Resurrection Remix, ROM for the Samsung Galaxy S9
Contributors
garettadrian
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI 2.x
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: 8.6.2
Stable Release Date: 2020-10-17
Created 2020-08-18
Last Updated 2020-10-18
The latest update of Resurrection Remix v 8.6.5 (12-12-2020) is out!
Get it here!
S9+
S9
Changelog: December 12, 2020
Device Changelog:
Synced to latest RROS sources!
Completely new kernel
New POWER hal for more battery
Donation would be highly appreciated since I am running out of credits. It would be awesome to help me fund the servers! Thanks!
PayPal
FAQS {READ BEFORE POSTING}
Q1 I can't pass safetynet/I can't get cts profile to be valid.Now?
Guide to pass ctsProfile
1. Search and download MagiskHide Props Config and Busybox for Android NDK from the Download section within Magisk
2. Download termux from the play store
3. Reboot the device as necessary
4. Run the following commands within termux su then props
5.Press the keys in order on each prompt 1,f,6,23,y,y
Q2 My Device is stuck in Booloop
Make sure you have followed the instructions on how we install it. Make sure you are on the latest One UI either 2 or 2.1 it doesn't matter as long as you're on Q. Wipe Everything and flash the rom, gapps (flame gapps preferable), magisk if you want
Q3 I am having problems setting up my phone on initial BOOT
FLASH Flame GAPPS basic. It's similar with open gapps pico but with sound picker.
Q4 Why isn't X feature there? Its there in xyz rom
I have recently worked on this due to the quarantine situations that gave me time to work on it. I have worked alone and currently I am working on my own because everyone is busy with their own lives right now. If you have a feature request, I will not guarantee adding it because I may get busy.
I built this ROM for personal use but since evryone is sitting at home now I thought to publish it.
Q5 Will we be back in the next Android version?
Sure.
Q6 Will this Rom get updates?
Yes. Regular up to some point
Special Notice
Code:
[/B][/B][/CENTER]
[B][B][CENTER]Hi guys, I hope you guys are home and safe. These are crazy times and everybody is at home. This ROM is a little gift for those who are bored and want to have a little fun. Enjoy, be safe & take care
Great ?
Great Rom !
Thank you for sharing .
is the encryption forced on this rom ?
installed last night and have found no detrimental issues so far - great ROM, thank you
of course there's still issues with the camera apps (trying to find the right one, and have yet to find anything which makes use of both cameras, but gcam works at least for manual aperture switching)
and I was also wondering, are there any plans to implement features such as;
performance options (coming from other devices, have seen they have battery, balanced, quick and extreme options)
double tap to wake (personally VERY important to me)
force fullscreen/hide status bar
just curious
again, thank you, easily the best ROM I've used so far, have had an s9+ for a little under 2 days and had to ditch ONEUI2 when I realised it was very locked down, especially in terms of customisation
kind regards,
TF
All TIME BEST ROM RR
No Bugs,beautify icons,little bloat but easily uninsalled,beautify UI And Boot animation is DOPE!
Keep Doing THe good work brother!
#KeepRRalive
CarpeNoctem said:
is the encryption forced on this rom ?
Click to expand...
Click to collapse
No, the encryption is not forced.
temporaryforever said:
installed last night and have found no detrimental issues so far - great ROM, thank you
of course there's still issues with the camera apps (trying to find the right one, and have yet to find anything which makes use of both cameras, but gcam works at least for manual aperture switching)
and I was also wondering, are there any plans to implement features such as;
performance options (coming from other devices, have seen they have battery, balanced, quick and extreme options)
double tap to wake (personally VERY important to me)
force fullscreen/hide status bar
just curious
again, thank you, easily the best ROM I've used so far, have had an s9+ for a little under 2 days and had to ditch ONEUI2 when I realised it was very locked down, especially in terms of customisation
kind regards,
TF
Click to expand...
Click to collapse
Double tap to wake doesn't work on stock. You can flash WW kernel or ElementalX and get Hktweaks. Enable double tap to wake from there but push home button to wake phone will not work.
Mr_Blue_5099 said:
No Bugs,beautify icons,little bloat but easily uninsalled,beautify UI And Boot animation is DOPE!
Keep Doing THe good work brother!
#KeepRRalive
Click to expand...
Click to collapse
Welcome bro! Enjoy the ROM
garettadrian said:
Double tap to wake doesn't work on stock. You can flash WW kernel or ElementalX and get Hktweaks. Enable double tap to wake from there but push home button to wake phone will not work.
Click to expand...
Click to collapse
thank you for the advice, will fingerprint unlock still work? it's just because i find it easier when my phone is on my desk to double tap the screen rather than pick it up
temporaryforever said:
thank you for the advice, will fingerprint unlock still work? it's just because i find it easier when my phone is on my desk to double tap the screen rather than pick it up
Click to expand...
Click to collapse
Yes! fingerprint unlock will always work.
Update error
I'm getting an error on twrp "updater process ended with ERROR: 7". I was on G960FXXSBETH1_DevBase_v7.3.zip before.Any ideas?
---------- Post added at 03:22 PM ---------- Previous post was at 02:58 PM ----------
dssenthil said:
I'm getting an error on twrp "updater process ended with ERROR: 7". I was on G960FXXSBETH1_DevBase_v7.3.zip before.Any ideas?
Click to expand...
Click to collapse
I was wiping vendor when installing, unselected vendor wiping and now able to install
dssenthil said:
I'm getting an error on twrp "updater process ended with ERROR: 7". I was on G960FXXSBETH1_DevBase_v7.3.zip before.Any ideas?
---------- Post added at 03:22 PM ---------- Previous post was at 02:58 PM ----------
I was wiping vendor when installing, unselected vendor wiping and now able to install
Click to expand...
Click to collapse
that's great
Thank you so much for maintaining starlte. I love RR.
Had some problems with first boot. It didn't start. After flashing WW kernel it works now.
I would have one request. Would it somehow be possible to add the omni network traffic style (status bar)? Where both, up- and download speed are shown simultaneously?
Freeze24 said:
Thank you so much for maintaining starlte. I love RR.
Had some problems with first boot. It didn't start. After flashing WW kernel it works now.
I would have one request. Would it somehow be possible to add the omni network traffic style (status bar)? Where both, up- and download speed are shown simultaneously?
Click to expand...
Click to collapse
The OMNI network traffic style is to be added by the devs of the RR. If you all have issues on setup screen (gapps) try flame gapps, works better for me than OPEN gapps.
Thanks for the hint, have also problems with gapps setup.
How can I get into contact with the RR team?
Freeze24 said:
Thanks for the hint, have also problems with gapps setup.
How can I get into contact with the RR team?
Click to expand...
Click to collapse
https://t.me/resurrectionremixchat
Freeze24 said:
Thanks for the hint, have also problems with gapps setup.
How can I get into contact with the RR team?
Click to expand...
Click to collapse
Gapps setup can be fixed. I flashed Flame-gapps basic and I had no problems on setting it up. You can try FLAME-GAPPS
Thanks.
Any idea when the power menu will be fixed?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.
Particularity to work the gestures in digital, thanks @kontemp
Do the same as in the video, in the initial setup
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
Stock ROM required
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
You can also join our Telegram Channels:
Global: https://t.me/z2play
Moto Z2 Play Custom ROMs group: https://t.me/Z2PlayGSI
XDAevDB Information
ResurrectionRemix Q for Z2 Play, ROM for the Motorola Z2 Play
Contributors
HeltonMax , jeangraff30
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: Android 10
ROM Kernel: Linux 3.18.xx
ROM Firmware Required: ALBUS_PPS29.133-30_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Version Information
Status: Stable
Created 2021-01-30
Last Updated 2021-02-08
Script for instaling Stock ROM
Interesting. Any known issues?
I was also interested and would like to know if there are any bugs.
gatsu777 said:
I was also interested and would like to know if there are any bugs.
Click to expand...
Click to collapse
I posted it because I didn't see any bugs, but if you show up with something you can help me fix it
HeltonMax said:
I posted it because I didn't see any bugs, but if you show up with something you can help me fix it
Click to expand...
Click to collapse
I will test soon! I will definitely report any bugs that I notice, friend. Thank you for sharing this rom with us!
So is flashing stock pie required before installing this? Will not work from oreo?
meelten said:
So is flashing stock pie required before installing this? Will not work from oreo?
Click to expand...
Click to collapse
Yes, that's why it says "Firmware required: ALBUS_PPS29.133-30 " AKA stock pie
I'm testing the rom and I'm finding it incredible. The only problem I found is that the fingerprint sensor gestures are not working
JBL Mod doesn't work, unfortunately...
Despite of that - rom is great, customization level incredible. Battery consumption low, SE Linux restrictive, security update 01.2021. Nicely done!
This looks really promising, I'll probably try it out. But I have a few questions:
1) Does encryption work?
2) As @gatsu777 mentioned, is it possible to use one-button navigation? I mean, does it come with Moto Actions at all? I know Android 10 has gesture navigation, but I'm really used to one-button nav. Also the lack of Fast torch and Quick capture would be kinda bummer.
3) Does the Always on Display (Peek display) work?
4) Do battery mods work? Can I configure it to use the efficiency mode?
5) Not a deal-breaker, but what about FM radio?
I assume basic features like bluetooth, dual SIM, USB connection, Turbo power etc. work just fine.
Thanks.
@Razemix :
1) the option is present (Security options -> Use encryption), but I didn't use it. The system is decrypted after first boot - you will have to try it on your own;
2) yes (in Moto Actions), but it needs some additional configuration - for example when I set "swipe right" -> "last app" after swiping I got all last apps On the other hand "single tap" -> "screen on/off" works just fine. Fast torch and Quick capture are present and working - if you mean those two standard Moto Actions;
3) AoD works - after moving the phone or waving a hand over it;
4) haven't tried. JBL Snap unfortunately doesn't work, even tried two different players - the issue is somewhere in the system itself;
5) FM radio works- after plugging some cable headphones of course;
6) bluetooth OK, USB connection OK (setting default connection also), dual SIM haven't check - don't have second sim card.
It looks very, very good - for me only this JBL issue needs some correction.
Congratulations, @HeltonMax !
@kontemp, how did you get the gestures on the impression sensor? I called and configured the actions there in moto actions, basically: start, back and recent, but the sensor does not respond, I even disabled the fingerprint unlocking and even then it was not.
Well, hard to say exactly how...
First of all I've used installer-pie.zip from second post above (option: "2-Installer-Complete.bat"), then formatted twice in twrp to remove encryption, then deleted everything in twrp (@marcost22, thanks for the advice!). This way I've achieved total whipe-out of old data and installed fresh stock Pie.
Second: during first startup I've disabled fingerprint at the very beginning (it can be done by choosing fingerprint+pin, then in second step choosing skip - and this way the procedure of setting fingerprint can be skipped without setting any initial data).
That's it... But this functionality acts a bit weird - like I wrote above not every "move" on fingeprint sensor is recognized correctly. Let's hope @HeltonMax will release another version with some corrections
Last thing - I use version XT1710-09, if it matters for the sake of firmware used in this rom...
Good luck!
@kontemp your explanation was very clear, friend! As you said it is not working perfectly, I will be satisfied with the gestures on the screen and use the unlock by fingerprint + pin. This rom is so perfect that I will really continue with it. Lots of configuration options, long battery life, and being able to them all with a black theme due to Android 10 is really cool. Thank you for your explanation and congratulations to @HeltonMax for the excellent work!
Hello guys, I just saw that the post is very busy lol thanks for reporting these problems and if you can send me logs (adb logcat -b all> logcat.txt) it helps me a lot it can be right here in the post or if you prefer you can me mark in the global group @ z2play or @ Z2PlayGSI that I will try to correct these problems
System encryption doesn't work. Phone reboots and then gets stuck forever on "Encrypting" screen with "time remained 00:00". After forced restart system is unaccessible.
As for fingerprint gestures in order to set actions Back, Recent Apps and Home one need first disable Navigation bar in: Resurrection tools --> System --> Buttons. Otherwise these actions are not recognizable.
hi guys,i've installed the rom, but no signal from network cell... some fix?
update: Fixed, i had to reinstall the android 9 and go back to RR.
SOMEONE KNOW HOW TO DISABLE THE PROXIMITY SENSOR??????
Rocale said:
hi guys,i've installed the rom, but no signal from network cell... some fix?
update: Fixed, i had to reinstall the android 9 and go back to RR.
SOMEONE KNOW HOW TO DISABLE THE PROXIMITY SENSOR??????
Click to expand...
Click to collapse
Another Problem guys, my battery dont want to charger anymore, it dont recognized the charger, i already try to reinstall the stock rom and nothing, the problem continues i think its soft brick, anyone can help? ty
New build available
RROS-Q-8.6.6-20210208-albus-Unofficial.zip
Fixed most Moto Mods
Full TV motomod support will be added soon
As I have no motomod to know if it was fixed, so I need to be told if it worked or not
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Bugs:
Same issues as in LineageOS 17.1 builds - VoLTE doesn't appear in settings.
Double tap to wake (broken in all ROMs).
Screen recorder doesn't always work.
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Sources
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
@highwaystar_ru
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
Device: Lenovo TAB4 8 (TB-8504X and TB-8504F)
Screenshots
A few screenshots after fully customizing...
@adazem009 @Hausemaster Fantastic job! I've loaded it on my 8504F.
Only issue I can find was on initial start, I declined the face unlock, and that prevented my going any further. I rebooted, and reflashed, but it kept saying I needed app permissions...
So I flashed LineageOS 17.1 (which has never worked for me - caused a boot loop), then re-flashed Resurrection and this time accepted face unlock.
And now, it feels like I have a brand new tablet!
Thanks guys!.
ImTherious said:
@adazem009 @Hausemaster Fantastic job! I've loaded it on my 8504F.
Only issue I can find was on initial start, I declined the face unlock, and that prevented my going any further. I rebooted, and reflashed, but it kept saying I needed app permissions...
So I flashed LineageOS 17.1 (which has never worked for me - caused a boot loop), then re-flashed Resurrection and this time accepted face unlock.
And now, it feels like I have a brand new tablet!
Thanks guys!.
Click to expand...
Click to collapse
You're welcome
Next build is probably going to come next week. It's going to fix screen recording.
Update - 05/14/2021
Download
Fixed screen recorder.
@adazem009 Thanks, I flashed without issue. No known issues yet.
I don't ever use Screen Recorder but when I tried, it failed: Recorder keeps stopping...
ImTherious said:
@adazem009 Thanks, I flashed without issue. No known issues yet.
I don't ever use Screen Recorder but when I tried, it failed: Recorder keeps stopping...
Click to expand...
Click to collapse
Please report bugs with logs. I've tested the screen recorder, but it seems I can't play the output videos.
Update - 05/20/2021
Download
May 2021 security patches
Ajeem Ahmad said:
I can dirty flash it ?
Click to expand...
Click to collapse
Yes.
adazem009 said:
Update - 05/20/2021
Download
May 2021 security patches
Click to expand...
Click to collapse
Flashed - all functional... Thanks.
Flashed everything working
Awesome rom, far better than stock rom
Thanks to dev.
ImTherious said:
Flashed - all functional... Thanks.
Click to expand...
Click to collapse
#Rohit kumar said:
Flashed everything working
Awesome rom, far better than stock rom
Thanks to dev.
Click to expand...
Click to collapse
Do outgoing calls work? I think they're broken in all LineageOS 17.1 based ROMs. (check if call voice works)
adazem009 said:
Do outgoing calls work? I think they're broken in all LineageOS 17.1 based ROMs. (check if call voice works)
Click to expand...
Click to collapse
Yes , even in lineage 16/17.1 based roms....
Fully functional...
adazem009 said:
Do outgoing calls work? I think they're broken in all LineageOS 17.1 based ROMs. (check if call voice works)
Click to expand...
Click to collapse
Only screen recording not working...
But screen recording also not worked in lineage 16/17.1 roms...
I tried to install this but ended up in a bootloop stuck on the RR logo (for over an hour). I tried going back to stock using the Lenovo rescue tool, which mostly works, but the tablet no longer has any Wifi. Any suggestions? I'm hoping reflashing the boot.img would help but I can't find a copy of that file anywhere -- if anyone can provide that I'd really appreciate it... thanks
jfbaudio said:
I tried to install this but ended up in a bootloop stuck on the RR logo (for over an hour). I tried going back to stock using the Lenovo rescue tool, which mostly works, but the tablet no longer has any Wifi. Any suggestions? I'm hoping reflashing the boot.img would help but I can't find a copy of that file anywhere -- if anyone can provide that I'd really appreciate it... thanks
Click to expand...
Click to collapse
Are you on the latest stock firmware? Also, did you wipe data,cache,Dalvik/ART cache after installing the ROM?
#Rohit kumar said:
Yes , even in lineage 16/17.1 based roms....
Fully functional...
Click to expand...
Click to collapse
Which firmware are you on? (Post the version number) I'm on the latest 0031 based stock firmware and the calls (outgoing) don't work on LOS 17.1 based roms, also, I'm pretty sure that the dev removed a file that's responsible for outgoing , so, I'm not really sure how outgoing works for you, so, please provide the firmware version so that I can install it and test it myself and also to see if the outgoing calls work...
jfbaudio said:
I tried to install this but ended up in a bootloop stuck on the RR logo (for over an hour). I tried going back to stock using the Lenovo rescue tool, which mostly works, but the tablet no longer has any Wifi. Any suggestions? I'm hoping reflashing the boot.img would help but I can't find a copy of that file anywhere -- if anyone can provide that I'd really appreciate it... thanks
Click to expand...
Click to collapse
Make sure you're on the Oreo firmware. LineageOS 16.0, 17.1 and all ROMs based on them boot only on the Oreo firmware. I once tried it with the Nougat firmware, which ended up in a bootloop.
Hausemaster said:
Are you on the latest stock firmware? Also, did you wipe data,cache,Dalvik/ART cache after installing the ROM?
Click to expand...
Click to collapse
After installing RR, yes, I wiped all those. Stock version I am trying to go back to is TB_8504F_USR_S001019_1909091114_Q12000_ROW -- Since I had no pending updates prior to trying to install RR, I assume that's the one I was one prior