Why this phone has literally no roms like lineage or asop?
monshoal said:
Why this phone has literally no roms like lineage or asop?
Click to expand...
Click to collapse
You can try havoc (android 9) gsi, or aosip (android 9) gsi. Working fine with my micc9.
Used ab image.
v0ne said:
You can try havoc (android 9) gsi, or aosip (android 9) gsi. Working fine with my micc9.
Used ab image.
Click to expand...
Click to collapse
With the camera with the gsi, do you have wide angle working and 48mp camera?
v0ne said:
You can try havoc (android 9) gsi, or aosip (android 9) gsi. Working fine with my micc9.
Used ab image.
Click to expand...
Click to collapse
Is there more information about partition scheme of this phone? It has A/B treble enabled, but how much space does it have, do you know, or is there a document about it anywhere?
william_1434 said:
With the camera with the gsi, do you have wide angle working and 48mp camera?
Click to expand...
Click to collapse
You need to flash anxcamera (miui camera port). I used version 139 + 48mp fix. Wide angle is working fine.
espireso said:
Is there more information about partition scheme of this phone? It has A/B treble enabled, but how much space does it have, do you know, or is there a document about it anywhere?
Click to expand...
Click to collapse
After you flash any gsi rom, you need to fix the system partition in wipe tab in twrp. I used any a/b gsi, no problem so far. I did try any gsi android q but got some problem with vendor.
Related
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
The Marionette said:
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
Click to expand...
Click to collapse
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Tell us how it works out [emoji846]
Skickat från min MI 8 via Tapatalk
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Been wanting to get the 8 se, but I've been waiting to hear if phh-treble and other GSIs work before buying. other than notch problems are there any other major issues? Once P is released and phh-treble is updated to android 9 the notch won't be a problem anymore due to AOSP notch support.
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Can you point me to a guide to run Lineage os or RR on out SE?
I am familiar in flashing custom for many years but i am new to treble and just heard about it.
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Ydraulikos said:
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Click to expand...
Click to collapse
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
marcel112 said:
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
Click to expand...
Click to collapse
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Ydraulikos said:
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Click to expand...
Click to collapse
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
marcel112 said:
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
Click to expand...
Click to collapse
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Does the system detect the notch on lineage?
Ydraulikos said:
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Click to expand...
Click to collapse
i did full wipe,
after that i tried to install image, but as what do i need to flash this?
system image
boot
recovery
vendor image
firmware
persist
splash
logo
etc etc?
i choose system image, but after flash ( was quick ) i get no OS?
edit: so i can flash anyone off this page, as long as i use arm64 Aonly for my Mi 8 SE?
edit 2: got it..
install is real fast, and phone is very quick
after trying treble...
i tried to go back to miui backup..
It boots fine, but i cant get past pin code?
I know 100% its the right code, does it have to do with trying treble?
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
jectsin said:
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
Click to expand...
Click to collapse
Everything works on RR? How is the camera?
_katho_ said:
Everything works on RR? How is the camera?
Click to expand...
Click to collapse
work. but bad quality
jectsin said:
work. but bad quality
Click to expand...
Click to collapse
yes and notch is not detected for me
marcel112 said:
yes and notch is not detected for me
Click to expand...
Click to collapse
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
The Marionette said:
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
Click to expand...
Click to collapse
i know this is not miui forum, but i made twrp backup..
Why cant i unlock after restoring after flashing Treble based roms ?
I tried yesterday 3 trebles and full wiped, and restored nandroid of miui 10.
All looks good, but after boot up, i cant get past pincode( i know its right code 110% )
Yesterday I started treble following the tutorial
1 . install treble twrp
2.install lineages 16,it's supported treble
3.download pixel Android R GSI
I tested it very smoothly. The functions are all normal. The only disadvantage is that sometimes it reboot
Below is a screenshot of Android R
Hi, I have 5 questions:
1. Where I can find modded TWRP for OnePlus 3T?
- In TWRP -> in the Terminal -> Type: treblize (is it correct?)
2. Can I use LineageOS 17.1 as Treble-enabled LOS?
3. Does Magisk works?
4. Does this Google Camera 7.3 works?
Link: https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_5beta10.200218.1320build-7.3.018.apk
It works great on Pixel Experience 10 ROM + OnePlus 3/3T Slow Motion Fix v2.0.1 (Magisk module).
5. Does the Google Pay works? (I'm asking because it will use Vendor partition from LOS and Google Pay doesn't work on LOS ROM's)
Thanks
Bring.Chen said:
2.install lineages 16,it's supported treble
Click to expand...
Click to collapse
FirstEver said:
2. Can I use LineageOS 17.1 as Treble-enabled LOS?
Click to expand...
Click to collapse
Official los (16.0 as well as 17.1) does not support project treble, nor does it support A/B partitioning.
In my expirience it's really helpful to spend a little bit more time on making a post and add exact versions and threads as reference to postings like this op. Such more precise postings help to avoid misunderstandings.
Bring.Chen said:
Yesterday I started treble following the tutorial
1 . install treble twrp
2.install lineages 16,it's supported treble
3.download pixel Android R GSI
I tested it very smoothly. The functions are all normal. The only disadvantage is that sometimes it reboot
Below is a screenshot of Android R
Click to expand...
Click to collapse
AB GSI with last LOS16 treble or A only with older LOS16 treble?
Flashed any patch or fix with it? What about Magisk, is 20.4 working on it?
mnsiw said:
AB GSI with last LOS16 treble or A only with older LOS16 treble?
Flashed any patch or fix with it? What about Magisk, is 20.4 working on it?
Click to expand...
Click to collapse
latest magisk canary confirmed to be working on android 11, magisk 20.4 will NOT work
hellcat50 said:
latest magisk canary confirmed to be working on android 11, magisk 20.4 will NOT work
Click to expand...
Click to collapse
Thanks. Tried with LOS 17 treble and then LOS 16 treble, it's booting fine but not connecting to WiFi network.
Can someone give me a process on how can i boot gsi images on my k20 pro.
Any gsi images..
Do you already know?
Dimasik137 said:
Do you already know?
Click to expand...
Click to collapse
nope i tried some gsi with fcrypt disabler but they didn't boot so just left trying.
Ezio553 said:
nope i tried some gsi with fcrypt disabler but they didn't boot so just left trying.
Click to expand...
Click to collapse
Same thing, i tried to install Flyme
Dimasik137 said:
Same thing, i tried to install Flyme
Click to expand...
Click to collapse
Yeah now i don't know but there should be some modifications needed to boot gsi on this phone or maybe an older vendor might be required i am not sure but i have never tried booting gsi with miui vendors only v12 vendors and oss vendor probably will never boot any gsi directly
you need android 11 vendor from MIUI 12.5. Android 10 vendor are borked that you can't use it for booting GSI ROMs. Just download MIUI 12.5 recovery ROM and delete everything except vendor.
Kursem said:
you need android 11 vendor from MIUI 12.5. Android 10 vendor are borked that you can't use it for booting GSI ROMs. Just download MIUI 12.5 recovery ROM and delete everything except vendor.
Click to expand...
Click to collapse
Ok so that means i can even use eu roms vendor to boot gsis .
Ezio553 said:
Ok so that means i can even use eu roms vendor to boot gsis .
Click to expand...
Click to collapse
yep, as long as it's based on Android 11
Kursem said:
yep, as long as it's based on Android 11
Click to expand...
Click to collapse
Ok i will test out this.
This Module enables RAW Capture on the Galaxy A30, and changes the camera Hardware Level from Limited to Full.
RAW Capture is required for most GCams to work.
For information about GCam, go to this thread. It's for the A20, but contains useful information.
Click to expand...
Click to collapse
How does it work?
It works by replacing the library located at /vendor/lib/libexynoscamera3.so with an edited one. For reverse engineering enthusiasts, here is the patch applied to the library.
Prerequisites
- Magisk v20.4 or newer
- Android 11 vendor and kernel (Not compatible with versions of the Eureka Kernel older than 9.0)
Installation
Install as a normal Magisk Module, through Magisk Manager or TWRP.
Troubleshooting
Camera doesn't work, shows Black Screen
Make sure you are using a compatible Android 11 kernel and vendor.
If this issue is happening after updating your firmware, please let me know.
Telegram
GitHub
Download
Does this work with aosp based roms? Or is it just one UI?
Borkode said:
Does this work with aosp based roms? Or is it just one UI?
Click to expand...
Click to collapse
Yes, it works with AOSP.
What kernel you recommend to use in gsi ROM with this module?
SirKosichka said:
What kernel you recommend to use in gsi ROM with this module?
Click to expand...
Click to collapse
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
TBM 13 said:
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
Click to expand...
Click to collapse
bro, you can enable 60fps FHD record for our devices?
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
Probably, I would have to check their libexynoscamera3.so library.
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
I just checked the library of the Galaxy S10 and yes, it should be possible. However, doesn't it already support RAW?
TBM 13 said:
However, doesn't it already support RAW?
Click to expand...
Click to collapse
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
flunkyball said:
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
Click to expand...
Click to collapse
Sure. Do you have Telegram?
Bro, you can make this mod for Android 10 vendor?
SirKosichka said:
Bro, you can make this mod for Android 10 vendor?
Click to expand...
Click to collapse
Technically, yes. However, in the A20 enabling RAW in the Android 10 library makes the camera freeze after some seconds in apps like GCam.
If you are willing to test, i can do it, maybe the A30 doesn't have the same issue.
Bro will this mod work for Galaxy A30 (Android 11) ??
Edit: I'm sorry....for a moment I thought this mod for A20.....Sorry again.
Hridoyz said:
this mod work for Galaxy A30 (Android 11) ??
Click to expand...
Click to collapse
Yes, only on gsi or Oneui3.1 ROMs.You need ROM with 11 vendor
Version 2.1 of the module released, the biggest change is that there is no longer a need to change the Black Level in GCam settings, so GCams (or other camera apps) that don't have this option should now take photos without pink tint.
Full changes can be found here.
not work in A305f
Ali1412 said:
not work in A305f
Click to expand...
Click to collapse
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
TBM 13 said:
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
Click to expand...
Click to collapse
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Ali1412 said:
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Click to expand...
Click to collapse
on Snake OS 5 gcam support included
I have tried system32-arm64-ab(not vndklite) gsi on my device and it boots into fastboot but the vndklite one works.
what exactly is vndklite version and in which device should I use that?
(My device supports VNDK 29.0)
Hey what procedure did you use to flash the GSI? I can't find anything about flashing GSIs on Redmi 9C.
I used lineage os,havoc os etc it works.
Patrick022 said:
I used lineage os,havoc os etc it works.
Click to expand...
Click to collapse
My bad. I thought you were using ported GSIs