Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
Official nugat recovery extracted from UPDATE.APP.
Flash just like any other recovery.
I have reverted back to MM with it.
Works on Eurpoean L21C432 (tested), not shure aboutothers.
Download:
https://mega.nz/#!wHwyHAIY!DnJgTJi1YVvzF1r-jku5d12DXUkBNHxDPtJZrKIy-rk
Nugat? ?
vidra said:
Official nugat recovery extracted from UPDATE.APP.
Flash just like any other recovery.
I have reverted back to MM with it.
Works on Eurpoean L21C432 (tested), not shure aboutothers.
Download:
https://mega.nz/#!wHwyHAIY!DnJgTJi1YVvzF1r-jku5d12DXUkBNHxDPtJZrKIy-rk
Click to expand...
Click to collapse
What build you used for rollback?
tw1st3d83 said:
What build you used for rollback?
Click to expand...
Click to collapse
was on B382 flashed Mm rollback package and then UPDATE.APP
HTML:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Introduction
This is an unofficial build of TWRP for Redmi 7 (onclite).
Based on TWRP version: 3.3.1
For device: onclite
Maintainer/Authors build: Galitsky Dmitry([email protected]/ [email protected])
Device tree: https://github.com/krot-melles/device_xiaomi_onclite-TWRP
In development plans
Supports CAF-based wrappedkey encryption (decryption) properly
Implemented
Mounts the system partition at /system_root as per AOSP standards.
Support install custom ROM (PE,RR and other)
Installation Instructions
Fastboot
Grab the recovery.img from extracted folder
Reboot device in fastboot
Run "fastboot flash recovery recovery.img" from fastboot
Boot into recovery
Downloads
IMG:Release list
Created 2019-05-10
Last update 2019-08-15
Thanks. I will try when I will arrived to home.
Is it control vendor partition too...?
I've installed your TWRP.
Unfortunately it is cannot bypass the encryption-decryption problem. Unfortunately, "format data" is required...
I need TWRP for Global Stable...but if I format data, after no SIM-card, and other problems (not suitable for MIUI incremental OTA)...this is good for custom roms only.
But very-very thanks your work.
Maybe next build will be better.
小米8青春版4/64国际版MIUI10.3.2.0
Somehow it wont flash the recovery on the 16/2gb version, yes phone is unlocked.
after abd flash recovery recovery.img it says ok, but after reboot no twrp but the original redmi bootloader v3.0.
TWRP is not flashable to Locked bootloader!
朱利安死了.請不要再打電話給他.红米7标准版3GB32GB稳定MIUIv10.3.6.0PFLINXM
please read, phone aka bootloader is unlocked.
Sorry. I ve read wrong.
So. On new phones need different install method
1.fastboot flash recovery recoveryname.img
2.fastboot boot recoveryname.img
(if img booted, you need reflash third recoveryname.img in TWRP, and you need install Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip then reboot if you want to use stock system)
or
1.fastboot flash recovery recoveryname.img
2.press an hold volume up
3.fastboot reboot command (on pc, press enter...but hold volume up constantly)
4.maybe then after mi logo, TWRP will launching
5.make format data with TWRP
6.install custom ROM
Day by day Xiaomi system is more closed.
朱利安死了.請不要再打電話給他.红米7标准版3GB32GB稳定MIUIv10.3.6.0PFLINXM
Ok got it working now thanks.
indeed little bit different than other phones i have used.
Update TWRP
15082019
BoardConfig: fixed PARTITION_SIZE values equated to partition.xml values
fstab: some fix
Click to expand...
Click to collapse
TWRP download
Do this recovery support decryption in stock ROM?
sherindroid said:
Do this recovery support decryption in stock ROM?
Click to expand...
Click to collapse
No((( maybe fix it in next build
Can I install ROM Builder from mi-globe.com? Can I take an error "Updater process ended with: Error 7"?
AdamWilling said:
Can I install ROM Builder from mi-globe.com? Can I take an error "Updater process ended with: Error 7"?
Click to expand...
Click to collapse
Do you have the opportunity to take a screenshot or error log???
can you flash apps with this version of twrp?
melles.android said:
Do you have the opportunity to take a screenshot or error log???
Click to expand...
Click to collapse
I already didn't tested...but maybe I know the problem, in redmi 7 is wrote onclite on every rom, but getvar of device is onc
Good work but encryption problem i hope get fixed
does this handle decryption and can disable dm-verify?
need help
JulianJenner said:
I've installed your TWRP.
Unfortunately it is cannot bypass the encryption-decryption problem. Unfortunately, "format data" is required...
I need TWRP for Global Stable...but if I format data, after no SIM-card, and other problems (not suitable for MIUI incremental OTA)...this is good for custom roms only.
But very-very thanks your work.
Maybe next build will be better.
小米8青春版4/64国际版MIUI10.3.2.0
Click to expand...
Click to collapse
hey julian i am replying you on this thread as the https://forum.xda-developers.com/redmi-7/how-to/redmi7-lr-team-twrp-3-3-0-redmi7-cn-t3924278 (this) is closed.
i am searching for a working recovery but available twrp are not getting the job done. i am looking for the recovery you talked about can u please refresh the download link or share the recovery with me as the given given in the orignal post dosent work anymore. Thanks in advance
I have no Redmi7 anymore.
Sent from my MI CC9 Pro using Tapatalk
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Instructions-
fastboot flash boot pbrp.img
*hold volume up and power buttons* fastboot reboot(do both together)
as soon as phone vibrates, lift all the buttons
let it boot
flash whatever is required/whatever you want to do
flash back the original boot.img meant for the ROM(if magisk is installed, you will lose it, so better flash magisk-patched boot.img)
reboot to system
Download
this is really wierd. no matter what i do i cant get into twrp or pbrp. i can boot custom roms no problem though. whe i try pbrp or twrp i just get stuck at the androidone logo. anyone gt any advice?
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This can be flashed to remove Orange State warning and 5 seconds wait time.
Tutorial from https://www.droidwin.com/how-to-remove-red-and-orange-state-warning-in-mediatek-devices/ was given to me
Used Android Script Creator to pack it into a zip.
Additionally I needed to remove "=> device unlocked" message as it started popping up after I removed orange state warning and 5 seconds boot time
Just flash Warning_Remover.zip in custom recovery, the warning will be removed.
lk.img of A12_C.09 was taken to apply the changes. It is advised that you too are on the same version of stock, if you are a custom rom user make sure that you were on that version before flashing the rom.
Don't Lock your bootloader after flashing Warning_Remover.zip it will brick your phone.
Thanks man this good
i already deleted Orange State warning with file from 4pda.
can i also remove dm verity corrupt?
can i flash this on my custom rom to disable orange state??
Code:
/*
*Disclaimer
*
* Your warranty may be void.
*
* We're not responsible for bricked devices, dead OTGs or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Download: https://github.com/blackshibe/android_device_sony_pdx201_a12/tags
Source: https://github.com/blackshibe/android_device_sony_pdx201_a12
Bugs
Some partitions don't mount
Backups untested/not configured
Decryption
Flashing images (or system updates) doesn't work; only zips flash
I won't fix this build up completely as I'm not good enough at Android development and don't have the major time investment to get everything working correctly.
How to flash
Make sure you have the bootloader unlocked
Make sure you have Android 12+
Put your device into bootloader or fastboot (plug in cable, power off, hold power+vol up)
Flash the recovery;
fastboot flash recovery recovery.img
Afterwards you can reboot to recovery by typing fastboot reboot recovery.
If you still use Android 11, flash https://github.com/fi01/twrp_sony_pdx201_jp/releases/tag/20210815 instead.
Contributors:
@dogenumberpi,
Thanks to:
@Sjll (TWRP for Android 11)
Developers of the ginkgo TWRP build
Date: 05-04-2023