[CLOSED][ROM][OFFICIAL][10.0][Onyx] Havoc-OS 3.8 [2020/08/18] - Nokia 7 Plus ROMs, Kernels, Recoveries, & Other De

[CLOSED][ROM][OFFICIAL][10.0][Onyx] Havoc-OS 3.8 [2020/08/18] - Nokia 7 Plus ROMs, Kernels, Recoveries, & Other De

Download Rom
Download Official Twrp
Android OS version: 10.0.0_r41
Security patch level: August 2020
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/Havoc-OS
ROM Developer: Anushek Prasal

Havoc-OS initial build is Up
For Nokia 7 Plus
Code - Onyx
Changelog
1. Initial Q beta build
2. Based on Q beta vendor.img
3. System blobs from 4040
4. October security patch
5. for Installation procedure go through installation section once

THANK YOU
note:
Install is a bit buggy, i had the best luck doing this:
fastboot -w
boot TWRP with adb
flash rom
swap slot
reboot twrp with ADB
flash kernal
reboot
flash GAPPS+TWRP
etc... (magisk, whatever)

Mysterious_RSA said:
THANK YOU
note:
Install is a bit buggy, i had the best luck doing this:
fastboot -w
boot TWRP with adb
flash rom
swap slot
reboot twrp with ADB
flash kernal
reboot
flash GAPPS+TWRP
etc... (magisk, whatever)
Click to expand...
Click to collapse
Not a good procces
First boot in to twrp
fastboot boot twrpname.img
Format data by typing yes
reboot to bootloader
fastboot boot twrpname.img
wipe everything now
Copy rom.zip and twrpinstaller.zip & flash both
Change to alternative slot
Reboot to recovery
Flash gapps
Flash kernel.zip
Wipe everything except system & vendor
Reboot system

Did exactly as you said, phone got bricked and I had to recover with OST LA, I'm not sure why it isn't working, but I really do wish i could use this ROM, so I'll wait a while for it to update
EDIT:
I got it to work with the above method, there was an issue with my boot loader, so had to downgrade everything and try again, worked.
Thank you, new favorite ROM

Mysterious_RSA said:
Did exactly as you said, phone got bricked and I had to recover with OST LA, I'm not sure why it isn't working, but I really do wish i could use this ROM, so I'll wait a while for it to update
EDIT:
I got it to work with the above method, there was an issue with my boot loader, so had to downgrade everything and try again, worked.
Thank you, new favorite ROM
Click to expand...
Click to collapse
Heheeh all right

Just Installed It on my Nokia 7 plus will test it and give feedback , so far looks amazing good job dev
---------- Post added at 10:50 PM ---------- Previous post was at 10:23 PM ----------
xidian said:
Just Installed It on my Nokia 7 plus will test it and give feedback , so far looks amazing good job dev
Click to expand...
Click to collapse
After 10 min of usage can report the following:
1- both of my sim cards are not recognized
2- the only navigation system that works is three dots
3- the installed pixel launcher crashes almost always
4- most google apps are unusable as they require login and the entire google services app is buggy and doesn't work (keeps crashing)
so i am gonna go and test some other roms but will be waiting for updates as this rom looks very promising and from what works amazing looking
and i do know that this is a very beta build and i am willing to provide the dev with any info he needs
keep up the good work

xidian said:
Just Installed It on my Nokia 7 plus will test it and give feedback , so far looks amazing good job dev
---------- Post added at 10:50 PM ---------- Previous post was at 10:23 PM ----------
After 10 min of usage can report the following:
1- both of my sim cards are not recognized
2- the only navigation system that works is three dots
3- the installed pixel launcher crashes almost always
4- most google apps are unusable as they require login and the entire google services app is buggy and doesn't work (keeps crashing)
so i am gonna go and test some other roms but will be waiting for updates as this rom looks very promising and from what works amazing looking
and i do know that this is a very beta build and i am willing to provide the dev with any info he needs
keep up the good work
Click to expand...
Click to collapse
Been having this exact same issue but i think its probably Gapps for android 10 being broken

My Havoc OS installation
Mysterious_RSA said:
Been having this exact same issue but i think its probably Gapps for android 10 being broken
Click to expand...
Click to collapse
Got it to work finally and it looks stable so far (with the release of the new lawnchair + quickswitch)
if you are interested in the steps i took after alot of tries here they are:
1- Boot twrp-3.3.1-0-B2N_sprout-10.0-20191108.img
2- Wipe Everything
3- Flash Havoc-OS-v3.0-20191105-Onyx-Unofficial.zip
4- Flash twrp-installer-3.3.1-0-B2N_sprout-10.0-20191108.zip (make sure they are version 10)
5- Switch to Alternative Slot (for me switching to a before flashing then back to b after twrp install seems to work)
6- Reboot to recovery
7- Flash this version of the GApps (open_gapps-arm64-10.0-nano-20190928-BETA.zip) they are older and don't have any compatibility issues with the OS
8- Flash Perf-Stock-10.0-B2N_sprout.zip
9- Wipe all Except System and Veender
10- Reboot and do the android setup till u reach the desktop (sign in )
11- Reboot back to recovery
12- Flash open_gapps-arm64-10.0-stock-20191105-BETA.zip (this will override old apps and install the missing hence the date 05/11)
13- Optional: if you want Magisk you can flash it now or any time in the future (Magisk-v20.0.zip)
after that the pixel launcher might still be faulty i will send a version i extracted from pixel experience that seems to work although i recommend using lawnchair + quickswitch
sorry for the long post i wanted to share my journey installing this rom

xidian said:
Got it to work finally and it looks stable so far (with the release of the new lawnchair + quickswitch)
if you are interested in the steps i took after alot of tries here they are:
1- Boot twrp-3.3.1-0-B2N_sprout-10.0-20191108.img
2- Wipe Everything
3- Flash Havoc-OS-v3.0-20191105-Onyx-Unofficial.zip
4- Flash twrp-installer-3.3.1-0-B2N_sprout-10.0-20191108.zip (make sure they are version 10)
5- Switch to Alternative Slot (for me switching to a before flashing then back to b after twrp install seems to work)
6- Reboot to recovery
7- Flash this version of the GApps (open_gapps-arm64-10.0-nano-20190928-BETA.zip) they are older and don't have any compatibility issues with the OS
8- Flash Perf-Stock-10.0-B2N_sprout.zip
9- Wipe all Except System and Veender
10- Reboot and do the android setup till u reach the desktop (sign in )
11- Reboot back to recovery
12- Flash open_gapps-arm64-10.0-stock-20191105-BETA.zip (this will override old apps and install the missing hence the date 05/11)
13- Optional: if you want Magisk you can flash it now or any time in the future (Magisk-v20.0.zip)
after that the pixel launcher might still be faulty i will send a version i extracted from pixel experience that seems to work although i recommend using lawnchair + quickswitch
sorry for the long post i wanted to share my journey installing this rom
Click to expand...
Click to collapse
here is the launcher and some screenshots

does Bluetooth work on this version of the ROM? broken on pixel exp and was hoping its ok here

Nope, broken on all current 10 GSI's

New builds are up
changelog
* Based on latest havoc sources
* Comes with prebuilt vendor.img
* Linux version - 4.4.165
* November security patch
* Flash open-gapps-10.0-nano

How exactly do you update this rom?
Say its installed on slot A and your on slot B after initial install, od you flash to slot A or B to just update?

Changelog
15/12/2019
1. 3rd party apps calls fixed
2.Whatsapp video calls & 3rd party apps video calls fixed
3. Vendor blobs updated from Nokia 7.1 android Q stable build
4. Global network issues also fixed
5. Nuked OnePlus camera & shipped with stock Snapdragon camera.

hi everything is working good
i have mic icon in Status Bar how to remove it?
how to make battery percentage in battery icon?
Volte work good i need to turn it off and on after reboot

Changelog
* shipped with Google apps
* No need to Flash Gapps from Now

Bug:
Double tap to wake in Setting -> Ambient Display do not work

Changelog - 26-01-2020
Note - clean flash recommended
* January security patch
* Disabled force encryption
* Compiled using legacy
* Linux version 4.4.194 ( Black caps edition ) based on Official stock kernel sources 4.10C & compiled using clang 9.0.3
* Fixed mic bug during calls via headphones
* Comes with 410C vendor.img
* Added OTA Support

Changelog Tue Aug 18 14:07:58 UTC 2020
===============================
* initial OFFICIAL build with gapps & without gapps
* Build based on latest stable sources
* Improved system stability
* User interface enhancements
* Google Security Patch 2020-08
* Faceunlock support out of the box
* Comes with BlackCaps kernel
* Linux version 4.4.212
* System blobs based on 4.15C
* Vendor blobs based on 4.15C
* Camera blobs based on 4.150
* Updated fingerprint to August from coral
* Redumped configurations from 4.15C/D dumps
* Fixed low volume issues on 6+ (no issues for 7+ , 7.1 & 6.1)
* Fixed usb tethering
* Fixed network switch
* Brought back plenty of network options like before (this really helps different zones/countries to select accordingly to their sim especially Newzealand, Australia , United Kingdom & California)
* Updated power profile from stock 4.15C (DRG/CTL/PL2) 4.15D (B2N)
* Updated usb configuration props from stock
* Updated CarrierConfig from motorola Payton (latest stock rom)
* Safety net passed out of the box
* All banking apps will work

Related

[ROM][OFFICIAL]LineageOS-15.1[Albus][Moto Z2 Play]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LIneageOS is a free, community built, after-market firmware distribution of Android re-branded CyanogeMod, which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project and CyanogenMod with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS please visit Gerrit Code Review.
Warning!!!
BackUp EFS partition before installing. .If you lose IMEI , use this backup to retrieve it in future.
Installation
First time LineageOS installation on your Moto Z2 Play:
Unlock your bootloader if you haven't done so already
Flash a custom recovery via Fastboot (64 bit TWRP is needed)
Copy Gapps (64 bit) and Lineage OS flash files to sdcard
Boot into Recovery
Format Internal Memory . I repeat Format.. (Not Wipe) (after format reboot to recovery)
Flash the LineageOS zip from SD card
Flash GApps from SD card
Reboot
Upgrading from earlier version of LineageOS :
Push the new LineageOS zip to your SD card
Boot into Recovery (64 bit TWRP)
Flash the LineageOS zip from SD card
Flash the most recent GApps (64 bit) for 8.x
Reboot
Downloads
- LineageOS : Weekly Builds
- Google Apps (arm64) : GApps
Bugs
You tell me
Reporting bugs
DO NOT report bugs if you're running a custom kernel
DO NOT report bugs if you've modifies system files
DO NOT report bugs if you've installed xposed and/or other mods
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Code:
adb logcat > logcat.txt
Code:
adb shell dmesg > dmesg.txt
If it is a random reboot, grab kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Code:
adb shell cat /sys/fs/pstore/console-ramoops
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues or bugs reported in the lastest 5 pages of this thread. Any bug not reported in the bug report format below may be ignored.
Code:
Phone Informations
* LineageOS version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official cm build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all DO NOT flash any SuperSu/SuperUser/SuperMan zip package to get root. Go to Settings>Developement Settings>Root access and select "Apps Only"
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Kernel Source : Here
Device Tree: Here
XDA:DevDB Information
LineageOS, ROM for the Moto Z2 Play
Contributors
rahulsnair, vache
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2018-09-17
Beta Release Date: 2018-01-13
Created 2018-01-06
Last Updated 2018-09-17

06-Jan-2017
Initial Release
13-Jan-2017
Fixed Camera
Fixed audio/headphone related issues
Tweaked haptic feedback
Downstreamed kernel to minimize bugs
Blobs updated to leaked oreo
24-Jan-2017
Fixed lag in audio playback
Fixed Vo-LTE support
Added lineage features (recording, hide navigation bar etc.. )
Fixed blue-tooth device name
Model specific init changes
27-Jan-2017
SeLinux Enforced
Implement 64 bit sensors libs
Ambient display reboot fixed
4-Feb-2017
Motorola Mod Support Added (verified battery mod , gamepad working)
Swicthed to permissive (Temporarily : TODO : fix moto mod denials)
Live display color issue fixed
Audio libs updated
Haptic feedback tweak
10-Feb-2017
Clean flash requires power source to initial boot fixed
Selinux switched to enforcing
Display color fixed
Kernel built with Clang (thanks to @Alberto97 )
Kernal Re-based to MMI-NPSS26.118-19-18
Greybus/V4l5_hal drivers updated to MMI-NPSS26.118-19-18
f2fs updated to MMI-NPSS26.118-19-18
prima updated to LA.UM.5.6.r1-06700-89xx.0
Camera blobs updated
18-Feb-2017
Running in minimal kernel
Mod driver updated
Lineage adaptive icons
Camera improvements
Selinux permissive

Reserved

Unable to boot flashed via the 64bit recovery did a clean wipe also formatted internal storage. Started to boot showed lineage os then reboots back into recovery.

Cleanser2012 said:
Unable to boot flashed via the 64bit recovery did a clean wipe also formatted internal storage. Started to boot showed lineage os then reboots back into recovery.
Click to expand...
Click to collapse
Same here
Sent from my [device_name] using XDA-Developers Legacy app

We have the same problem
Enviado desde mi Moto Z2 Play mediante Tapatalk

I pulled these logs after it rebooted back into twrp recovery

I've managed to boot in after the format and flash. But data was disabled, screen off sent a shut down signal and went directly to the recovery. I'll flash stock and try another way around. props

Those who experience reboot .. disable ambient display.

I came here to say what I'm finding, I'm using it on the bike xt1710-07, the automatic theme works using the launcher pixel2, I found it very cool, using a dark wallpaper, the theme darkens and the theme turns white, turn off the screen only in the power button of the device, the rom supports the magisk as I am using it and I have root access, as you mentioned the device does not stay reigning alone, I had to disable the display environment, it's a shame the camera does not work, in my opinion this was the that I found so far, if the camera by at least the other problems work does not affect much, I loved this rom.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
sorry my english because I'm from Brazil and I'm writing on google translate

carlinhossp said:
I came here to say what I'm finding, I'm using it on the bike xt1710-07, the automatic theme works using the launcher pixel2, I found it very cool, using a dark wallpaper, the theme darkens and the theme turns white, turn off the screen only in the power button of the device, the rom supports the magisk as I am using it and I have root access, as you mentioned the device does not stay reigning alone, I had to disable the display environment, it's a shame the camera does not work, in my opinion this was the that I found so far, if the camera by at least the other problems work does not affect much, I loved this rom.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
sorry my english because I'm from Brazil and I'm writing on google translate
Click to expand...
Click to collapse
Hey mate, could you please just backup your EFS partition and send it to me? i lost my during the format and now i have no mobile data. Thanks in advanced!!!

Thank you and good work.

13-Jan Release Note
New build has been released.
Link has been updated in the main post.
Change logs has been updated in the second post
Overview
Fixed up camera
Fixed up audio/headset related issues
Tweaked haptic feedback
Bugs left:
Ambient display needs to be turned off. (Otherwise device restarts)
Flashlight chop chop gesture doesn't work
Quick download link : here
Make sure you take EFS backup before flashing any custom rom...

just backed up stock and flashed latest build.... hooray for camera and FM Radio Ambient display still causing reboot to recovery, but I never use that feature on any of my devices so I disable it. I'll report any bugs I find and provide logcat(s) if needed.
I have the wireless charging moto mods addon. I did some looking around on the moto z (griffin) forum and found an addon to flash. I might try it after I get this build setup and backed up.
*edit* addon does not work without modding since it's looking for griffin.

I applaud you.!

I think no custom ROMs have supported MotoMod features yet. I'm so eager to try this ROM. It seems much more stable now. Good job,rahulsnair...:good:

huatz84 said:
I think no custom ROMs have supported MotoMod features yet. I'm so eager to try this ROM. It seems much more stable now. Good job,rahulsnair...:good:
Click to expand...
Click to collapse
Im this ROM, moto actions, like biometric gestures works fine.
Gesture to open camera too

About root, magisk works fine. Tested:!

huatz84 said:
I think no custom ROMs have supported MotoMod features yet. I'm so eager to try this ROM. It seems much more stable now. Good job,rahulsnair...:good:
Click to expand...
Click to collapse
Does that include the power Mods, like Turbopower?
I love custom Roms, but I can't live without my battery Mods. On the z1, that wouldn't be so bad, but z2......

bgochoa said:
Im this ROM, moto actions, like biometric gestures works fine.
Gesture to open camera too
Click to expand...
Click to collapse
Only twist to capture works. Hopefully,Motomods will be supported. I just ordered incipio power pack.
kewlzter said:
Does that include the power Mods, like Turbopower?
I love custom Roms, but I can't live without my battery Mods. On the z1, that wouldn't be so bad, but z2......
Click to expand...
Click to collapse
Yeah..there are some roms which have supported Moto Mods in griffin (Z Play).
Sent from my Moto Z2 Play using XDA Labs

[ROM][UNOFFICIAL][9.0.0_r33]CypherOS 7.0.0[Enchilada][25/02/2019]

25/02/1019
1) fixed network related issues.
2) added inbuild fluid gestures app( no adb and root required to give permissions)
3) added custome doze package.
17/02/2019
1) updated to February security patch
2) gapps included
3) network issues fixed
4) added hide nave bar in buttons customisation

Great rom!!!!
Thx for this!!

Thank you! I'll try it now

Why is this unofficial sir?

Astrubale said:
Why is this unofficial sir?
Click to expand...
Click to collapse
AOSCP official Pie builds not yet for any device

Is this built with the Feb security update?

Niiiiiiice

Good rom, would be nice to have advanced reboot

cmart4 said:
Is this built with the Feb security update?
Click to expand...
Click to collapse
not at ...after 2 days I will push with Feb security

R33 updated and added gapps in build

Why is the 2nd build more than 2x the size of the first? Just curious
Nevermind gapps incl

cmart4 said:
Why is the 2nd build more than 2x the size of the first? Just curious
Nevermind gapps incl
Click to expand...
Click to collapse
Added gapps,gcam and some other stuff

niiiiiiiice

new build posted
25/02/1019
1) fixed network related issues.
2) added inbuild fluid gestures app( no adb and root required to give permissions)
3) added custome doze package.

Instruction for installation, sir?

ired17 said:
Instruction for installation, sir?
Click to expand...
Click to collapse
1. If you're coming from another ROM or need to perform a clean flash:
Boot into TWRP
MAKE SURE YOU'RE USING ONLY blu_spark TWRP
Flash the latest OxygenOS zip
Flash TWRP Installer
Reboot to recovery
Flash OxygenOS zip again to make sure you have it on both slots
Flash TWRP Installer
Reboot to recovery
Flash ROM (link in first post)
Wipe Data and Cache
DO NOT WIPE SYSTEM!!!!!
Flash TWRP Installer
Reboot to Recovery
Flash GApps
Flash ONLY the latest Magisk
Any mods you want to flash (I won't be supporting Custom Kernels or Xposed)
Reboot to system
2. If you're updating the ROM:
Flash Substratum rescue zip if you have a theme applied
Flash ROM
Flash TWRP Installer
Reboot to recovery
Flash GApps
Flash Magisk
Reboot

Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.
---------- Post added at 01:15 PM ---------- Previous post was at 12:46 PM ----------
chandra1.jd said:
1. If you're coming from another ROM or need to perform a clean flash:
Boot into TWRP
MAKE SURE YOU'RE USING ONLY blu_spark TWRP
Flash the latest OxygenOS zip
Flash TWRP Installer
Reboot to recovery
Flash OxygenOS zip again to make sure you have it on both slots
Flash TWRP Installer
Reboot to recovery
Flash ROM (link in first post)
Wipe Data and Cache
DO NOT WIPE SYSTEM!!!!!
Flash TWRP Installer
Reboot to Recovery
Flash GApps
Flash ONLY the latest Magisk
Any mods you want to flash (I won't be supporting Custom Kernels or Xposed)
Reboot to system
2. If you're updating the ROM:
Flash Substratum rescue zip if you have a theme applied
Flash ROM
Flash TWRP Installer
Reboot to recovery
Flash GApps
Flash Magisk
Reboot
Click to expand...
Click to collapse
Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.

ired17 said:
Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.
---------- Post added at 01:15 PM ---------- Previous post was at 12:46 PM ----------
Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.
Click to expand...
Click to collapse
no ..but same process for all roms

Thanks a lot. Btw, oneplus full gestures and slider is properly functioning?

[ROM][OFFICIAL] Omnirom for Zenfone6 (2019) [Deprecated, see Q Thread]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Omnirom ?
Selinux Status:
Enforcing
Instructions :
Follow this Steps by steps
You need to be in stock Asus ***.189 or .191., on both slots Please. Current active slot A
First Install
* Download Rom , TWRP, GAPPS (nano)
* REMOVE ALL FINGERPRINT/LOCKSCREEN SECURITY in your current ROM
* reboot to bootloader
* fastboot boot nameofyourtwrp.img
* flash omnirom.zip
* flash twrp-recovery_installer.zip
* reboot recovery
* Wipe (swipe for perform factory reset)
* flash GAPPS
* flash Magisk (optional)
* reboot and profite
Update for unofficial release
* reboot to recovery
* flash omnirom.zip
* flash twrp-recovery_installer.zip
* reboot recovery
* flash GAPPS
* flash Magisk (optional)
OTA (For official)
Use OTA inside rom for updates. nano gapps backup included.
if u did something else. we dont need/wanna know about it in the thread
Device Maintainers
@micky387
Download:
OPENGAPPS ( ONLY NANO RECOMMENDED)
Last stable Magisk if needed
TWRP @mauronofrio
Official Omnirom build
Telegram Group:
Official OmniROM Community
Omnirom Zenfone6/6Z
Source Code
Omnirom
Omnirom gerrit
XDA:DevDB Information
Omnirom for Zenfone6 (2019), ROM for the ASUS ZenFone 6 (2019)
Contributors
micky387
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Beta Release Date: 2019-08-20
Created 2019-08-20
Last Updated 2019-09-08

Changelog 09-15
* Add (Partially) Smart Key for Google Assist
* Add Asus Camera in the build.
* Fix Selinux Denied for This App Asus Camera
* Add Night Mode for camera
Changelog 09-08
* Fix mediaprovider selinux denial (you can now read/open your sound track on your Sdcard)
Changelog 2019-09-05
* Fix audio issue
* Add Swipe Up unlock support
Changelog 2019-08-31
* Add offscreen gestures support
* Update FP and proprietary blobs to 191
* Ability to use @mauronofrio twrp recovery to flash stock and omnirom
* Add/Update camera blobs
Changelog 2019-08-23
* Add Fm Support
* Update FP for August security patch

Enjoy and good play

Happy to see a second ROM for the ZF6, thanks for the work!
Does this work with the port of the Asus camera?

abprie said:
Happy to see a second ROM for the ZF6, thanks for the work!
Does this work with the port of the Asus camera?
Click to expand...
Click to collapse
certainly, test and report

micky387 said:
certainly, test and report
Click to expand...
Click to collapse
Hehe... that's a confusing answer though. Don't you own a ZF6?

abprie said:
Hehe... that's a confusing answer though. Don't you own a ZF6?
Click to expand...
Click to collapse
ofc yes, but i dont tested Asus camera port. include and using Snapdragoncamera 2

Thanks so much for this!
Is there any way to enable dark mode like on lineage?
For those interested: nandroid backup and flashing works with the provided twrp.

isthisadagger said:
Thanks so much for this!
Is there any way to enable dark mode like on lineage?
For those interested: nandroid backup and flashing works with the provided twrp.
Click to expand...
Click to collapse
If dark Device theme isnt good in Display--> Device theme, you need to enable dev option to force Night Mode

New update available in OP
Changelog 2019-08-23
* Add Fm Support
* Update FP for August security patch
Click to expand...
Click to collapse

Hi firstly would like to thank for this amazing rom of its stability and all. With that said, installation of this rom took me hours since iam new to the A/B boot partition of the phone (previous phone used was the note8 with no A/B Boot partition) but then again you need to get used to it. With that said, asuscamera.zip port works on the rom. When first launch of rom go to panoroma for front camera to flip thereafter it worked properly then.With that i have a couple of suggestions for the said phone since iam wanting to used this rom as daily driver
1st. For Security wise, i hope in future update you would introduce front facing unlocked of the phone since its one of the features of the phone which is flip cam.
2nd. For the notifications toggles, i hope you would also have the toggles of the sound/vibrate and mute since its quite easier by pulling down noti instead of pressing volume button and mute/vibrate the phone.
3rd. For the omniswitch launcher , i hope in future you would introduce folder of putting in apps as its rather untidy seeing my homefeed fill with apps all over the place.
4th. Also its rather confusing now since that theres omniswitch and also the normal way of using the phone of swiping up for recents item and also swiping down for notifications toggles so i hope you can enable/disable either.
With that said hope you listen to my above suggestion and also may i asked where i can donate

Hi developer, since it needs wipe data when installing.
I would like to know if there is retract camera and double tap to wake feature?

Add to that also the fingerprint unlocked sometimes worked sometimes it did not so it needs to get some fix there.
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
checkin1991 said:
Hi developer, since it needs wipe data when installing.
I would like to know if there is retract camera and double tap to wake feature?
Click to expand...
Click to collapse
Double tap to wake works and retract camera is there too.

I installed the latest update from ASUS. And I am unable to boot this ROM. Not sure if Im doing something wrong or if it just not supported.
I followed your instructions, tried your TWRP, TWRP from the TWRP post.
Just loops to the ASUS logo, or just stays at the ASUS logo.

ZeroPoke said:
I installed the latest update from ASUS. And I am unable to boot this ROM. Not sure if Im doing something wrong or if it just not supported.
I followed your instructions, tried your TWRP, TWRP from the TWRP post.
Just loops to the ASUS logo, or just stays at the ASUS logo.
Click to expand...
Click to collapse
I installed Omni successfully on Stock 174 and stock 189 with the provided TWRP 18.
Did you try it with boot to twrp > flash twrp installer > reboot to twrp > format > reboot to twrp > flash omni + twrp installer > reboot twrp > wipe > flash gapps?

isthisadagger said:
I installed Omni successfully on Stock 174 and stock 189 with the provided TWRP 18.
Did you try it with boot to twrp > flash twrp installer > reboot to twrp > format > reboot to twrp > flash omni + twrp installer > reboot twrp > wipe > flash gapps?
Click to expand...
Click to collapse
Very close to that. I didnt format between the two reboots to TWRP.
Maybe Ill give that a shoot when I get home from work today.
Edit: Thanks Dude. I got it to boot.

Has anyone used the speaker in WhatsApp or telegram calls? Even on the lowest volume setting it is very loud. Is there any setting to lower the min volume?

Hi guys
OP updated with new build
Changelog 2019-08-31
* Add offscreen gestures support
* Update FP and proprietary blobs to 191
* Ability to use @mauronofrio twrp recovery to flash stock and omnirom
* Add/Update camera blobs
Click to expand...
Click to collapse

amiruls said:
Hi firstly would like to thank for this amazing rom of its stability and all. With that said, installation of this rom took me hours since iam new to the A/B boot partition of the phone (previous phone used was the note8 with no A/B Boot partition) but then again you need to get used to it. With that said, asuscamera.zip port works on the rom. When first launch of rom go to panoroma for front camera to flip thereafter it worked properly then.With that i have a couple of suggestions for the said phone since iam wanting to used this rom as daily driver
1st. For Security wise, i hope in future update you would introduce front facing unlocked of the phone since its one of the features of the phone which is flip cam.
2nd. For the notifications toggles, i hope you would also have the toggles of the sound/vibrate and mute since its quite easier by pulling down noti instead of pressing volume button and mute/vibrate the phone.
3rd. For the omniswitch launcher , i hope in future you would introduce folder of putting in apps as its rather untidy seeing my homefeed fill with apps all over the place.
4th. Also its rather confusing now since that theres omniswitch and also the normal way of using the phone of swiping up for recents item and also swiping down for notifications toggles so i hope you can enable/disable either.
With that said hope you listen to my above suggestion and also may i asked where i can donate
Click to expand...
Click to collapse
Thanks for your report
1/ Already inside. With nano gapps installed ofc, go to security-->smart lock and active. And go to omnigears--> lockscreen and switch on Auto Unlock
2/ We will look at that but may be under Q because it is soon ....
3/ i dont know if max want that...

amiruls said:
Add to that also the fingerprint unlocked sometimes worked sometimes it did not so it needs to get some fix there.
Click to expand...
Click to collapse
No problem for me but i have added more wakelock time for FP

[ROM][10.0][UNOFFICIAL] LineageOS 17.1 [RMX1971] [19/11/2020]

Updates
1911
19/11Changelog
- Updated security patch
- Added some smoothness tweaks in ui
- All Audio Issues Fixed
- Lineage source upstream
- Improved app opening speed
- Fixed ui shutters
- Added VOOC Charging support
- Some misc improvements
- More fixes and improvements.
1510
15/10 Changelog
- Enforceing Build
- Source Upstream
- Fixed audio delay on audio players
- fixed audio always high on incall
- fixed some other issues with audio
- Kernel Upstreamed to 4.9.237
- Using coral R fp for safetynet
- Several fixes and improvements
- Improved wifi stability/speed
- Updated Radio and CNE blobs from LA.UM.8.6.2.r1-08400-89xx.0
- Added KharaMeParts
- Fixed cast crashing after some time
- Fixed focus not working in camera apps
- Fixed high exposure while trying to scan barcodes in apps like whatsapp, gpay etc
- KCAL Support
- Vibration control inside kharaMeParts
2008
20/08 Changelog
- Enforceing Build (one more step to offical)
- August security patch
- Android-10.0.0_r40 -> android-10.0.0_r41
- Source Upstream
- Built kernel with clang
- Added FM
- Fixed cts failing(U need to enabled magisk hide)
- Updated camera blobs to Q
- Updated audio blobs to Q
- Updated media and audio configs
- Removed unnecessary blobs
- Fixed wifi display crashing
- Kernel upstreamed to 4.9.227
- Several performance improvements & misc changes
- F2FS Support (you can format data and cache to f2fs now)
0308
03/08 changelog:
- Moved to RUI Base
- source upstreams
- Kernel based on Realme 10 Kernel Source
- qcacld-3.0 upstreamed to LA.UM.8.8.r1-07300-SDM710.0
- fw-api upstreamed to LA.UM.8.8.r1-07300-SDM710.0
- qca-wifi-host-cmn upstreamed to LA.UM.8.8.r1-07300-SDM710.0
- Kernel Upstreamed to .226 tag
- Updated some blobs to realemui
- Enabled aosp bluetooth hal v2
- Fixed mic
- July security patch
- Moved audio panel to left side
- Updated Carrier Settings from Coral RPB1.200504.018 6520161
- Updated Blobs to RealmeUI
- Improved app launching speed
- Fixed Random reboot while device kept idle
- Fixed audio crashes and other audio issues
- Updated aptX blobs
- Fixed Vowifi and Vilte(Both should be working fine now)
- Kernel Upstreamed to LA.UM.8.8.r1-07600-SDM710.0
- Builts kernel with clang
- minior bugs fixes
- preformance improved
- Improve dt2w
- overall improments
1704
16/04 change log:
source upstreams
minior bugs fixes
preformance improved
kernel changelog:
Wakelocker is here
overall improments
1805
Update:-
- Sorce side upstream
- Move from android-10.0.0_r33 to android-10.0.0_r35
- Kernel upstream to 4.9.223
- Kernel compiled with Clang 11.0.1
- SELinux Enforcing.
- Updated May coral fingerprint for safety net.
- Fixed mic issues while gaming.

F&Q
1) ROM is bootlooping?
Use the right way to boot it and keep in mind theres 2 variant of Realme 5 Pro
1.RMX1971EX (this one which i test my roms on it)
2.RMX1971 (Q)
both have the same hardware but it not the same software as the some changes in storage,
but both need this steps to boot successfuly on your phone.
Curious_guy said:
From TWRP i followed the steps bellow.
1) Wiped everything
2) Installed C.05 and rebooted to recovery (didnt start on C.05 RUI)
3) Again wiped everything, flashed 20200820 (latest build) and bitgapps(Recommended).
4) Then reboot to system.
Click to expand...
Click to collapse
Thanks for Curious_guy sharing his experiance for the other users to follow
P.S: MAKE SURE U DONT USE OPENGAPPS and use the recommended bitgapps for avoiding anyway of bootlooping until next annoucment
2) What is Unified Realme SDM710 (Realme X,XT,3pro,5pro) Project ?
Unified Realme SDM710 is a project for the SDM710 phones from realme to make it easier for users to get update faster
HOW ?
in an easy way to explin it
its a rom it can be flash and work in [Realme X,XT,3pro,5pro] this way it will be get faster updates for all in the same way.
right now its in beta stage with a booted rom worked for the four roms but there a lot bugs to be fixed before any public release.

installed it so far so good gonna try battery performance and games

Hey, can I flash this ROM after I've updated to Realme UI? Thanks!

sansgood said:
Hey, can I flash this ROM after I've updated to Realme UI? Thanks!
Click to expand...
Click to collapse
no u have to flash coloros first (you dont have to boot it just flashing it will do the job) then flashing this rom

Is fast charging working on this rom I have installed it and installed ampere app to measure it says 3520mA
No clue if its fast charging

whats New
Is there chance of getting official support from lineage os

kemo12533 said:
no u have to flash coloros first (you dont have to boot it just flashing it will do the job) then flashing this rom
Click to expand...
Click to collapse
The fact is, I didn't find any way to downgrade RUI to Color OS. Is there some tutorial for the european version? Big thanks.

sansgood said:
The fact is, I didn't find any way to downgrade RUI to Color OS. Is there some tutorial for the european version? Big thanks.
Click to expand...
Click to collapse
now u can unlock the bootloader u can flash twrp or anyonther recovery then flash coloros

kemo12533 said:
now u can unlock the bootloader u can flash twrp or anyonther recovery then flash coloros
Click to expand...
Click to collapse
I have already my bootloader unlocked and twrp working, but i cant find anywhere to download Color OS firmware for Realme 5 pro. In realme website I can only download the RUI one.

killerhaha100 said:
Is fast charging working on this rom I have installed it and installed ampere app to measure it says 3520mA
No clue if its fast charging
Click to expand...
Click to collapse
As far as out charger is 4 Ampers, I would say yes.

sansgood said:
I have already my bootloader unlocked and twrp working, but i cant find anywhere to download Color OS firmware for Realme 5 pro. In realme website I can only download the RUI one.
Click to expand...
Click to collapse
u can see and download it from here , make sure u select and download RMX1971EX_11_A.17 or earlyer builds

I managed yesterday to downgrade and flash this one and it works like a charm. Very smooth and stable. Thanks for sharing and for the help!

dude this is absolutely great. do you plan releasing updates for this in the future? because it seems like its the first release of 17.1 so there are still a lot of fixes to be done yet by the lineage devs.

sansgood said:
I managed yesterday to downgrade and flash this one and it works like a charm. Very smooth and stable. Thanks for sharing and for the help!
Click to expand...
Click to collapse
Brother,
Can u tell me the procedure to downgrade? now i m in Color OS 7 c02? and is it possible to Realme Ui from custom Rom?

vistaabalaji said:
Brother,
Can u tell me the procedure to downgrade? now i m in Color OS 7 c02? and is it possible to Realme Ui from custom Rom?
Click to expand...
Click to collapse
If you're in Color OS then you have the right firmware and you can flash this rom via TWRP. Make sure you wipe your data and cache before flashing. If you get into recovery after first reboot (could happen if you are in a rom with data encryption), format data and reboot again.

sansgood said:
If you're in Color OS then you have the right firmware and you can flash this rom via TWRP. Make sure you wipe your data and cache before flashing. If you get into recovery after first reboot (could happen if you are in a rom with data encryption), format data and reboot again.
Click to expand...
Click to collapse
sorry, i m in Realme Ui, can you provide me the steps/procedure to downgrade from Realme Ui to Color os 6.

vistaabalaji said:
sorry, i m in Realme Ui, can you provide me the steps/procedure to downgrade from Realme Ui to Color os 6.
Click to expand...
Click to collapse
Yes, of course. This are the steps I followed. I assume you haven't an unlocked bootloader and TWRP installed. If so, you can skip the 3 first steps.
1 - Unlock bootloader following this tutorial. https://c.realme.com/in/post-details/1184734239149522944 . If you face any issue when entering the commands in fastboot mode I would recommend connecting the usb to another port of your computer and try again.
2 - Flash TWRP. You can find a guide here https://forum.xda-developers.com/re...de-newbie-resource-thread-bootloader-t3995285 . It is pretty simple, in summary you must flash the TWRP image and the VBMETA image in fastboot mode.
3 - Enter in TWRP, make a backup of all partitions.
4 - Download ColorOS firmware from here https://realmeupdater.com/downloads/archive/RMX1971EX/ (thanks kemo12533). I downloaded the RMX1971EX_11_A.17 version. You will get an OZIP file that you must copy to your phone. I would recommend copying it to an external SD card.
5 - From TWRP, wipe system, data, cache and dalvik cache. Press install and select the ColorOS ozip you moved to SD.
6 - Press reboot system and you should boot into color OS. If your phone reboots into recovery mode again, format data (keep in mind that this will erase everything in your phone storage).

Thank you very much for your effort. May I ask if this will work with european models? Are there really no known issues in the very first release? Will this be added to the official download lists?

[GSI][ROM][11.0][AOSP+GAPPS][04/08/21]

Code:
Disclaimer:
We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
An AOSP based ROM, with gapps included and gesture support (pocket, hand wave, pickup).
Based on Android 11.0
Bugs:
You tell me!
Steps:
1. Use latest CosmicDan treble TWRP
2. Re-partition to treble layout if you haven't done so yet
3. Flash vendor.img, system.img and a treble supported kernel (you can use mine or any of the other treble kernels on tissot xda)
4. Wipe data if coming from any other rom(!)
5. Flash Rom (No need for gapps, do not flash them, they are included!)
6. Reboot and wait for setup wizard to come up (may take 2-3 minutes)
7. Reboot
There is now a toggle to add SuperSU on boot in Phh Settings > Misc:
Just enable it and reboot. (Keep in mind it breaks safteynet, if you need to use a banking app, disable it from settings and reboot)
Downloads: Link
@phhusson for his work on GSI (donate to this man, he works on dozens of devices)
@flex1911 for his help bringing 9.0 kernel source for tissot
Oreo team (you all know who you are,@CosmicDan for twrp, @ghpranav for treble vendor source)
Enjoy!
P.S.
I am not going to add any custom features from other roms so please don't comment about that, feel free to flash any other GSI with this vendor/kernel if you want other features.
Source: https://github.com/aosp-tissot
kernel source: https://github.com/aosp-tissot/android_kernel_xiaomi_msm8953-1
Credit to @flex1911 for the original work on the kernel
XDA:DevDB Information
[GSI][ROM][11.0][AOSP+GAPPS][05/11/20], ROM for the Xiaomi Mi A1
Contributors
sooti, phhusson, flex1911, Ranjan
Source Code: https://github.com/aosp-tissot
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Treble
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-11-05
Created 2020-09-21
Last Updated 2020-11-05

Changelog:
04/08/21:
* Final build of A11 (until 12 )
* August security patch
01/08/21:
* Small fixes
* Refactor over phh repo
20/07/21:
* July security patch
19/06/21:
* June security patch
* Latest phh additions
15/05/21:
* Latest May sec patch
* Latest phh additions
09/04/21:
* Latest April sec patch
* Latest phh additions
03/02/21:
* Fixed magisk support, please disable phh-su and restart to remove it if you want to flash magisk afterwords
* Feb security patch
05/01/21:
* Jan security patch
* New treble settings for style thanks to phh
* Enabled the sdcardfs override feature, should provide better performance
08/12/20:
* December security patch
05/11/20:
* November security patch
* Any hotspot issues should be fixed now
17/10/20:
* Fixed button lights
* Fixed camera crashing in 3rd party apps like bigo live
15/10/20:
* Added wellbeing to settings
* Exclusive Feature: Super SU on demand:
Simply enable it from Phh-Settings > Misc > Enable SU
Then reboot. Please not safteynet will fail while its enabled, if you need a banking app, just disable it from settings and reboot
07/10/20:
* Fixed VoLTE
06/10/20:
* Merged the latest Phh fixes (nothing device specific for our device)
* October security patch
* Pulled latest phh settings app
23/09/20:
* Fixed FPC sensor detection (fingerprint should work now on fpc devices)
21/09/20:
* Initial release: everything except voLTE works (including passing CTS etc)

Thanks bro.

I don't know if I did something wrong, but the fingerprint is not working for me

leofwg said:
I don't know if I did something wrong, but the fingerprint is not working for me
Click to expand...
Click to collapse
What do you mean not working? Did you clean install? Does it show up in settings? Are you using my vendor + kernel?
Edit: tested it again on clean install, works fine.
Please follow all the instructions and use my kernel and vendor

sooti said:
What do you mean not working? Did you clean install? Does it show up in settings? Are you using my vendor + kernel?
Edit: tested it again on clean install, works fine.
Please follow all the instructions and use my kernel and vendor
Click to expand...
Click to collapse
I'm probably missing something ... these are my steps:
- device is already in treble mode
- format data
- flash vendor, flash system,flash boot.img (kernel = boot.img, right?)
- the system starts without problems! but the initial configuration does not show the fingerprint option
apparently for me only fingerprint didn't work... the system is working perfectly. thank you sooti

leofwg said:
I'm probably missing something ... these are my steps:
- device is already in treble mode
- format data
- flash vendor, flash system,flash boot.img (kernel = boot.img, right?)
- the system starts without problems! but the initial configuration does not show the fingerprint option
apparently for me only fingerprint didn't work... the system is working perfectly. thank you sooti
Click to expand...
Click to collapse
I don't know...was it working for you in Q?
Try 'fastboot -w' in fastboot

sooti said:
I don't know...was it working for you in Q?
Try 'fastboot -w' in fastboot
Click to expand...
Click to collapse
i was not using Q before
tried with fastboot -w... still no fingerprint option on initial setup
ill use it without fingerprint for a while!
thank you

Any lag issue?

Mr Magneto said:
Any lag issue?
Click to expand...
Click to collapse
No

Works normal so far. Is there the latest boot.img? Because this old boot.img makes GCam v7 freeze.

Sorry,
but how I can "re-partition to treble layout if you haven't done so yet"?
GPS, battery life, gcam, WiFi, Bluetooth, ok Google are ok?

leofwg said:
I don't know if I did something wrong, but the fingerprint is not working for me
Click to expand...
Click to collapse
It's same for me aswell. Fingerprint missing . It was working in Q

binishm said:
It's same for me aswell. Fingerprint missing . It was working in Q
Click to expand...
Click to collapse
No idea, it's working fine for me, please make sure you haven't flashed magisk
Flash the vendor and boot image from the drive , wipe using fastboot -w then reboot ,.
Tried it twice and it's fine
If it's still not working please send logs

d_borghi said:
Sorry,
but how I can "re-partition to treble layout if you haven't done so yet"?
GPS, battery life, gcam, WiFi, Bluetooth, ok Google are ok?
Click to expand...
Click to collapse
If you don't have a vendor partition you need to repartition

fachry said:
Works normal so far. Is there the latest boot.img? Because this old boot.img makes GCam v7 freeze.
Click to expand...
Click to collapse
You can flash any boot.img that supports treble

sooti said:
If you don't have a vendor partition you need to repartition
Click to expand...
Click to collapse
I'm on revengeos 9;
Where I can find tutorial for all steps?
Thank you

sooti said:
You can flash any boot.img that supports treble
Click to expand...
Click to collapse
I think Perf+ v235 support Android R, Unfortunately no. Until now nothing kernel support R for Mi A1.
Adaptive screen still error. Sometimes dimm sometimes bright

fachry said:
I think Perf+ v235 support Android R, Unfortunately no. Until now nothing kernel support R for Mi A1.
Adaptive screen still error. Sometimes dimm sometimes bright
Click to expand...
Click to collapse
Not sure what you're talking about... Best to just use my vendor and kernel, no brightness issues

FPC fingerprint don't work. Nice work, thanks

Database Develop

welcome