Related
how is Sipdroid performing on the AT&T branded phone?
its not bad, but it seems a little quiet. i had linphone on my iphone and it sounded much better
I think overall the captivate is quiet in the headphones/handset. Is there a way to add sipdroid to the list of programs to use when making an outbound call?
Use Google Voice
Use sipdroid
Use Cell
Is this possible?^
Main Target said:
I think overall the captivate is quiet in the headphones/handset. Is there a way to add sipdroid to the list of programs to use when making an outbound call?
Use Google Voice
Use sipdroid
Use Cell
Is this possible?^
Click to expand...
Click to collapse
as long as you are connected with SIPDroid, you can use the options in the app:
SIPDroid only
SIPDroid when available
Phone
if you are using the first 2 options, it will default to SIPDroid.
Hmm thats a shame. I would have much preferred to be presented with that option much like googlevoice does.
I did just find the option that will overide sipdroid if you add a + at the end of a call....but how about dialing out of the phone book?
So are you guys using the latest sipdroid (1.5.x) on Captivate and it doesn't crash the dialer -- it works normally just a bit quiet, that's it?
Has anyone been successful in setting up the native SIP client on a tab running gingerbread??
I am looking for someones experiences with this native VoIP client and also can you tell me what SIP Service Provider you used?
This link describes how to configure the Android native SIP client on gingerbread devices. Perhaps someone would be kind enough to explore these settings and post your results.
http://www.voipvoip.com/android/sip.html
UPDATE: I just learned that the 'settings' menu for internet calls does not appear by default in gingerbread. Its been disabled on our SGTs. To enable you must copy a file to system/etc/permissions. Can someone here shed some light on this? Is this only true for the stock Gingerbread thru Kies download? thanks.
da_in_sd said:
Has anyone been successful in setting up the native SIP client on a tab running gingerbread??
UPDATE: I just learned that the 'settings' menu for internet calls does not appear by default in gingerbread. Its been disabled on our SGTs. To enable you must copy a file to system/etc/permissions. Can someone here shed some light on this? Is this only true for the stock Gingerbread thru Kies download? thanks.
Click to expand...
Click to collapse
I use Overcome ROM RC1 with enabled VoIP in Settings->Internet calls.
My provider is iptel.org.
I have an issue with incoming calls over SIP. I can't answer. I think the problem is in original dialer by samsung.
I'm using the Overcome ROM RC2 where the SIP option is enabled.
It works well, although the lack of keypad during a call makes it hard when you run into an automated phone service and you can't enter any dtmf tones. I would guess this is related to the problem cromed has when trying to answer a call. (I haven't received a call so can't answer first hand)
My only other grumble would be the low call volume, but this is also the case when using fring or sipdroid.
Audio quality though, is great.
Hmm. Has anyone tried one of the SIP clients on the market on their tab? Such as 'sipdroid' or CsipSimple ? Can you post your experiences here please? thanks
SIP Clients
da_in_sd said:
Hmm. Has anyone tried one of the SIP clients on the market on their tab? Such as 'sipdroid' or CsipSimple ? Can you post your experiences here please? thanks
Click to expand...
Click to collapse
I have used both Sipdroid and CsipSimple. Sipdroid is pretty basic but works as described. CsipSimple ate up my battery, and Sipdroid did until I switched to a PBXES account (uses TCP instead of UDP). PBXES is a pain to setup, but once you finally figure out how it works its fine. Used it to take my DX overseas a couple times with WiFi only (used a MiFi through XCOM Global), and have perfect voice. Need to use the Speex codec for 3G connections or else you get jitter or big delays; I use it for all connections though.
Just got the GB update on the DX and sad to see no native SIP client.
I now have a Polycom connected to PBXES for my home phone. Both are trunked through Sipgate.
da_in_sd said:
Has anyone been successful in setting up the native SIP client on a tab running gingerbread??
...
UPDATE: I just learned that the 'settings' menu for internet calls does not appear by default in gingerbread. Its been disabled on our SGTs. To enable you must copy a file to system/etc/permissions. Can someone here shed some light on this? Is this only true for the stock Gingerbread thru Kies download? thanks.
Click to expand...
Click to collapse
Well, I just upgrade SGT-P1000N to stock Gingerbread 2.3.3, and VoIP does not come enabled. Found the permission file at: http://forum.xda-developers.com/showthread.php?t=1016583
UPDATE: Yep, it works. Just tested it. Works with Bluetooth headphones, yay!
It may prove my naivete to even suggest this, but I have wondered if it might be possible to sign in to a Skype account with this native dialer. Fields are limited to username, password and server. So it's that server address that eludes me.
CostaRicaHobo said:
It may prove my naivete to even suggest this, but I have wondered if it might be possible to sign in to a Skype account with this native dialer. Fields are limited to username, password and server. So it's that server address that eludes me.
Click to expand...
Click to collapse
Nope, Skype uses proprietary protocol, not SIP.
Sent from my SGT-P1000N - XDA App - Gingerbread!
I'm having the same issues as mentioned above on Overcome Gold. No way to pick up an incoming call. Outgoing call is fine but no keypad if needed.
Quality is very good.
Have tried Sipdroid, Csimple,...and other...but my prefered has been Linphone. Excellent quality.
But now I'm using GrooveIp. Work well with Google voice and allows you to make free phone call coming and outgoing.
It's a paid app..but cost $2.00 on Amazon...$4 on Google Market. YOu may have to adjust some settings to fine tune it...I had to do that.
UPDATE: This may not work any more because Google said that they will cut off the Google Talk XMPP on 5/15/2014, which PBXES relies on.
This guide is not about how to make free calls. It's about how to make free calls using iLBC codec so that you can make reliable calls over 3g connection. If you only want the instructions, then skip to part V.
(edited) I have changed my VoIP set up to PIAF on AWS EC2. See my signature.
I. BACKGROUND
There are several known methods to make free VoIP (internet) calls over 3g. I'll briefly discuss each to explain why there's no perfect solution. I'm not claiming my solution is perfect, either. You have to try them out and find out yourself what works for you.
1. Groove IP app
codec: PCMU (aka G711u, uncompressed signal used by PSTN and Google Voice, only good for fast/reliable wifi connection)
pros: simple setup, works well on wifi. If you use VoIP only on wifi, this is for you.
cons: echo. The voice quality is terrible on mobile data (3g) connection.
2. talkatone app
codec: speex for standard quality
pros: easy setup, good quality on 3g using speex .
cons: doesn't integrate well with android
3. Vonage mobile app
codec: G729(?) when making regular calls. iSAC when calling a Vonage member.
pros: G729 provides an excellent quality even on 3g.
cons: can't receive calls and doesn't integrate with Android. You need to input 10 digit number to make a call, unless the number is in your contacts.
4. Google Voice/pbxes/sipdroid (http://forum.xda-developers.com/showthread.php?t=1791957)
codec: lots of options based on connection type
pros: excellent battery life (http://code.google.com/p/sipdroid/wiki/NewStandbyTechnique), If you choose speex codec for 3g, then call quality is pretty good on 3g.
cons: must unlock the screen before answering the call. doesn't support better codecs such as iLBC/G729.
5. simonics GV gateway https://simonics.com/gvgw/ + sip client of your choice
codec: PCMU
pros: simpler setup than pbxes, some ppl claim it's more reliable.
cons: limited codec support. no multiple registrations
6. Setting up your own asterisk server (http://enjoytechnology.info/)
pros: everything is configurable
cons: requires a 24/7 running server
I have been primarily using #4 setup but wasn't satisfied with the call quality on 3g so I was about to do #6. But I found a way to tweak #4 to use iLBC codec and greatly improved the call quality on 3g.
II. CODEC COMPARISONS
The call quality basically depends on (1) the codec that your phone uses and (2) the network throughput. Unfortunately, there's no perfect solution because of trade-offs.
PCMU (64kbps) is the uncompressed signal that is transmitted at PSTN. So it will give you the best quality as long as your network throughput supports it. This is the preferred codec for wifi connection. However, 3g network cannot consistently sustain 64kbps and will suffer from packet loss resulting in jitter. This explains why Groove IP works best on wifi but not over 3g.
At the other end of the spectrum is GSM codec (8kbps). It's designed in 1990 for wireless communication over 2g. It's the most compressed signal, which is used by your regular GSM providers (AT&T, Tmo). These wireless providers allocate sufficient capacity on voice calls so your voice calls will suffer little jitter. However, the call quality is inferior to PCMU codec.
There are many codecs in between. For example, Sipdroid and talktatone can use speex, which requires low bandwidth. These apps can send the same signal twice to compensate for packet loss.
The 2 codecs that haven't been used widely in commercial apps are G729 and iLBC. These 2 codecs require low bandwidth (<15kbps) but have algorithm to interpolate loss packets. It is suggested these 2 codecs are ideal codec for 3g connection. Here are some readings comparing G729 vs iLBC.
http://blogs.elastix.org/en/2009/11/...cs-in-elastix/
http://forums.whirlpool.net.au/archive/1413041
In short, both are excellent codecs for 3g. iLBC has a better quality but requires more CPU power, which Nexus 4 can easily handle. My setup relies on iLBC.
III. SETUP
My setup is an extension to #4 method above. It involves 4 free resources.
1. Google Voice (same phone number for in/out calls and free outbound calls using gtalk)
2. callcentric (VoIP provider for free inbound calls)
3. pbxes (PBX that manages in/out calls)
4. csipsimple (android VOIP app that supports iLBC)
Once set up properly, here's how the incoming and outgoing calls will work.
1. Incoming GV calls
Someone calls your GV number. GV forwards the call to callcentric. Pbxes intercepts the call and rings your phone. Your phone displays caller ID (CID) properly.
2. Outgoing GV calls
You place a call in your phone dialer. Pbxes calls the number using gtalk trunk. The recipient will see your GV number as CID.
IV. BENEFITS
What are the benefits of my setup?
1. Completely free in/out calls. You don't even give out any CC information. All I'm paying is 30/m for Tmobile's 100 min, unlimited data prepaid plan.
2. Excellent call quality even on 3g using iLBC codec. I often get better call quality than Tmo's GSM.
3. Keeping the same number for in/out calls.
4. Full Android integration.
5. Battery life. Only requires 1 SIP registration to pbxes using TCP port. Battery stat screenshots after 10 hours are attached here: http://forum.xda-developers.com/showpost.php?p=35889479&postcount=91
V. INSTRUCTIONS
Are you still with me? Then follow these steps.
#1. Get a fast phone that can handle iLBC codec. FYI, a 2-yr old Galaxy S has the sufficient CPU power for iLBC.
#2. Get an unlimited fast data plan such as Tmobile's $30 prepaid plan. http://prepaid-phones.t-mobile.com/monthly-4g-plans
#3. Install and set up Google Voice app on your phone. Without GV, you can't open a free pbxes account in #4.
#4. Install Sipdroid to create a pbxes account.
When Sipdroid opens, it will detect whether you have GV app installed. If so, it will give you an option to open a free pbxes account linked with Google Voice. Create the pbxes account. In case Gmail flags for an attempted login, allow pbxes to gain access. Once you create the pbxes account, make test calls in and out using Sipdroid. Some ISPs may block you from using VoIP so make sure you can make calls before the next step. As of now, sipdroid doesn't support iLBC codec so we will be using other sip clients for making calls.
#5. Log in to pbxes.org and click "personal data".
Fill out all the blanks. Doesn't need to be correct. If you skip this step, pbxes has been known to remove the account later. While you are doing it, I recommend changing the pbxes login password that you used in step #4 to something else. In addition, pick a data center (server) closest to you to lower latency. If you have registration issues, change to a different server. FYI, I had registration issues with www7 (Miami) server.
#6. Open a free phone number (DID) account at callcentric.com.
You can only get a NY area code number but it doesn't matter because you will be giving out your GV number to your friends. All incoming calls to callcentric (including GV forwarded calls) will be free. You can decline E911 service to stay completely free. Callcentric supports efficient codecs such as G.729 and iLBC. We will be relying on iLBC. The outgoing calls are not free but we will be using GV to make free outbound calls.
Next, we have to link pbxes with callcentric so that pbxes can receive GV forwarded calls to callcentric. There are two ways to do this. (If you are wondering why we are using callcentric instead of gtalk, it's because pbxes has issues with iLBC for gtalk incoming calls. Callcentric handles iLBC better so we are piggybacking it.)
#7a. Callcentric call forwarding to pbxes.
Log in to callcentric.com. Go to preferences>DID forwarding. Input your [email protected] in the box and save. AFAIK, callcentric doesn't charge call forwarding to a SIP address (our method). However, it does to a regular phone number.
Alternatively,
#7b. Have pbxes intercept the calls to callcentric.
Log in to pbxes.org. Click add trunk, select SIP trunk and input callcentric credentials. (user name starts with your callcentric 1777 number.) Select "audio bypass" to pass-through callcentric's iLBC signal to the phone. See the attachment for what my setup looks like.
Here's a tutorial on adding trunks: http://www4.pbxes.com/wiki/index.php/Getting_Started
#8. Add extension(s) in pbxes.
Log in pbxes.org. Click extensions. If you followed step #4, you should see extension "Sipdroid-200." You can add new ones or modify extension 200. Change the password to something that you can easily remember. This will be the password you will use to register your phone to pbxes in the next step. Finally, select "audio bypass."
#9. Install nightly version csipsimple app from http://nightlies.csipsimple.com/trunk/. The play store version crashed with iLBC.
First, add the pbxes account. If you are new to VoIP, use the wizard for pbxes. User name should be yourgoogleID-200, where 200 is the extension you used in #8. The password is what you changed to in #8. (I recommended you change the password in #8 so that you don't use your gmail password everywhere.)
Do not add callcentric account because having 2 registrations drains battery faster. If you followed the steps above, you will still be able to receive callcentric calls from your pbxes account.
I prefer csipsimple because it is has lots of options to configure. But it can be too overwhelming to some people. If you can't get it to work, then try other sip clients such as media5-fone.
#10. Let's change csipsimple for better call quality.
First, in settings/media/codecs, select iLBC as the only codec for 3g connection. If you have a strong wifi connection, then select PCMU for wifi connection.
(optional) If you experience looping when making calls, set up filters appropriately. I set up mine such that all calls will be made by pbxes except for 911.
#11. Google Voice (from webpage)
Add callcentric DID number (not the 1777 number). All the GV forwarded calls to callcentric will be forwarded to pbxes and ring csipsimple on your phone.
Uncheck Google chat so that pbxes only receives callcentric forwarded calls. FYI, GV doesn't support iLBC codec natively.
(optional) uncheck Tmo mobile number, if you are completely satisfied with this setup. If GV is forwarding to your cell, then your cell will be ringing twice and you may accidentally answer the cell phone using your minutes.
#12. (optional) Test in/out calls.
I use these numbers to test the audio quality.
*43 (pbxes echo test)
(909) 390-0003 (PSTN echo test)
(408) 647-4636 (record/playback)
Note that during a call in csipsimple, you can click the settings button in the lower right corner to change the in/out volumes and enable/disable echo cancellation.
You should also test incoming call quality using Google Voice call back. This is where I had the most troubleshooting. My incoming call quality was awful until I found callcentric trick.
I have tested this setup in many different scenarios including in a car running at 45 mph and very happy with the results. Of course, YMMV depending on how good your 3g connection is.
VI. LIMITATIONS
What are the drawbacks?
1. latency (audio delay). iLBC codec makes CPU interpolate to make up for loss packets. This is why the call quality is better than other codecs over 3g. However, the disadvantage is it increases audio lag. I'm experiencing a 0.5s lag one way on 3g. This is not too bad considering a cell>GV>cell call has a similar latency (http://www.howardforums.com/showthread.php/1621673-Voice-Latency-Test-Results, couldn't find a more recent test result)
2. Once a caller calls your GV number, it takes 5-6 seconds for your phone to ring. This is a limitation of PSTN and GV forwarding not VOIP. On the other hand, if a caller calls my cell number directly, it rings in 4-5 seconds. So all the call routing through caller>Google Voice>callcentric>pbxes>phone will add 1 extra second for your phone to ring compared with caller>phone.
3. Pbxes with gtalk trunk will make your Google chat status show as "online and available" all the time. Your friends may think you are online when you are actually not. Another side effect is you won't be able to answer GV calls from PC gmail any more. I haven't found any workaround to fix this other than creating a new google voice account.
4. Nexus 4 VoIP issues. It has been reported that several hardware mic functions (echo/noise cancellation) are disabled for N4 VoIP. http://code.google.com/p/android/issues/detail?id=41626 OTOH, echo cancellation is enabled in Galaxy Nexus. You can mitigate the issue with adjusting the media settings in sip client. But if you are in a noisy area, the mic is going to pick up all the noise. Consider using the headset.
VII. TIPS/TRICKS
1. If your family/friends know how to internet call, then it's best to give out your SIP address; [email protected]. Then the call will go out fast and the phone quality will be the best because you are not using PSTN at all. If both caller and recipient are using the same pbxes server, then pbxes is the only node between the two. For example, when my wife with the same setup calls me @pbxes, my phone rings in less than 2 seconds and the call quality is the best.
2. Create multiple extensions (300, 400, etc) in pbxes.
I have 3 devices registered to pbxes simultaneously: my cell phone, my tablet and the ATA for my home POTS phone. When I receive a GV call, all 3 devices ring simultaneously. And I can call any other extension independently by entering its 3 digit extension number.
3. Try other sip clients
I suggested csipsimple because it's open source and free despite being an unstable nightly version. You should try out other apps because they may perform better for you. For example, when I use media5-fone (free w/ ads, $5 to remove ads), the audio latency improved but it consumed a little more battery.
4. Battery improvement
My Nexus 4 easily lasts 16 hours w/ 3+ hour screen time. There are several things you can do to improve battery life. Use TCP only in client to communicate with pbxes.org. If you use csipsimple, you need to change the account settings. First, use the wizard to switch to expert mode. Then you will see "transport" option in the account settings. Select TCP. Another thing you can do to improve battery life is to experiment with larger keep alive intervals.
5. Use a different gmail account for your GV number
If you are uncomfortable with giving out your gmail password (even the app specific one) to pbxes, then transfer your GV number to another gmail account. http://support.google.com/voice/bin/static.py?hl=en&ts=1378507&page=ts.cs The whole process took less than 30 minutes. Once done, you don't need to create a new pbxes account. Just log in pbxes.org, go to Trunk>Gtalk and make the necessary changes. If done properly, you can make calls out again instantly. If you are using GV app, then you need to add the new account.
6. Delayed GV call forwarding
You can set up pbxes such that it rings your cell phone if you don't answer the internet call in X seconds. See
http://forum.xda-developers.com/showpost.php?p=36041116&postcount=196
VIII. Troubleshooting
1. This guide is definitely not simple. Lots of things can go wrong. If you want help, then provide as much information as possible. Posting a screenshot of pbxes call monitor log will be a good start.
2. If csipsimple doesn't work, try other sip clients such as media5-fone. If you can't make a call with media5 either, then you know at least it's not csip's fault.
3. If you suspect pbxes malfunctioning, change the datacenter (server) from pbxes.org.
Since you've done so much testing, maybe you could include some more information on how your setup works. Like, how many seconds does it ring? How about voicemail? Any issues if you enter/leave your home (i.e., wifi area) during a call, etc.
How about audio delay? Mine is noticeable using Google voice and the carrier.
Sent from my Nexus 4 using Tapatalk 2
I would like to test this setup. Can you give more details and examples for steps 3-b and 3-c in creating the trunk and inbound routing on pbxes.org?
Thanks again for any help that you can provide!
plee3
I'm very untested in this as well. Why not just port my number to the $30/mn plan. Then use gv from my PC to make calls or from groveip on my N4?
Sent from my Nexus 7 using xda premium
plee3 said:
I would like to test this setup. Can you give more details and examples for steps 3-b and 3-c in creating the trunk and inbound routing on pbxes.org?
Thanks again for any help that you can provide!
plee3
Click to expand...
Click to collapse
If you have never changed settings in pbxes, then this guide may be helpful.
http://lucas719.info/function/free_phone
If I get a chance in the future, I might update the OP with more instructions for those who have never used pbxes before.
marty331 said:
I'm very untested in this as well. Why not just port my number to the $30/mn plan. Then use gv from my PC to make calls or from groveip on my N4?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Because grooveIP uses PCMU and PCMA codecs, which won't work reliably on 3g mobile data. The biggest advantage of my setup is iLBC codec, arguably the best codecs for 3g mobile connection. Another great codec for 3g is G729 but I haven't found an integrated way to use G729 for free.
frigidazzi said:
How about audio delay? Mine is noticeable using Google voice and the carrier.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Latency, or delay, is inherent to all VOIP calls. To mitigate the delay, pick a server closest to you in settings from pbxes website.
post-mortem said:
Since you've done so much testing, maybe you could include some more information on how your setup works. Like, how many seconds does it ring? How about voicemail? Any issues if you enter/leave your home (i.e., wifi area) during a call, etc.
Click to expand...
Click to collapse
GV calls forwarded to pbxes ring about 17 seconds. This is well documented in another XDA thread.
I rely solely on GV voicemail.
When you leave wifi, you lose registration to SIP server.
I passed 2 tests today.
1. I can have a pretty good conversation while driving at 45 mph. I haven't had a chance to test on highways yet.
2. My wife is satisfied with the set up on her N4.
In addition, I found media5-fone app has less latency than csipsimple. However, you have to pay to remove the ads and it consumes more battery even w/ TCP connection.
acegolfer said:
I passed 2 tests today.
1. I can have a pretty good conversation while driving at 45 mph. I haven't had a chance to test on highways yet.
2. My wife is satisfied with the set up on her N4.
In addition, I found media5-fone app has less latency than csipsimple. However, you have to pay to remove the ads and it consumes more battery even w/ TCP connection.
Click to expand...
Click to collapse
Good news. Have you tried Bluetooth with media5-fone? I am having some issues using Bluetooth with csipsimple and am looking for another SIP client other than sipdroid.
Thanks... plee3
acegolfer said:
When you leave wifi, you lose registration to SIP server.
Click to expand...
Click to collapse
What exactly does that mean?
andoird213 said:
What exactly does that mean?
Click to expand...
Click to collapse
This means if you are on a call using wifi, when you leave your wifi range, your call will be dropped as your SIP connection is lost.
Hope this helps... plee3
plee3 said:
Good news. Have you tried Bluetooth with media5-fone? I am having some issues using Bluetooth with csipsimple and am looking for another SIP client other than sipdroid.
Thanks... plee3
Click to expand...
Click to collapse
I have not tried Bluetooth with N4. In fact, I don't know where my BT headsets are.
FYI, media5 is a free app with ads. It costs $5 to remove ads.
plee3 said:
I would like to test this setup. Can you give more details and examples for steps 3-b and 3-c in creating the trunk and inbound routing on pbxes.org? plee3
Click to expand...
Click to collapse
Seconded!
Thanks for sharing all these details, if I knew more about the pbxes setup, I might give this a shot. Any chance you'd share screenshots of your pbxes setup? I've tried modifying mine before, but never successfully.
quarksurfer said:
Seconded!
Thanks for sharing all these details, if I knew more about the pbxes setup, I might give this a shot. Any chance you'd share screenshots of your pbxes setup? I've tried modifying mine before, but never successfully.
Click to expand...
Click to collapse
3-b. Add a trunk using callcentric SIP credentials in pbxes. Log in to pbxes.org, click add trunk, select SIP trunk and input callcentric credentials. (user name starts with 1777 number.)
http://www4.pbxes.com/wiki/index.php/Getting_Started
3-c. Add an inbound route for callcentric trunk. This will pull any calls to callcentric and route them to N4. (OTOH, if you try to push the call from callcentric end, it will not be free.)
3-d. Select "audio bypass" in both callcentric trunk and extensions. pbxes will pass-through the calls from callcentric to N4 so that you can use iLBC codec. (pbxes claims to support iLBC but when I answer gtalk calls, there's no sound. That's why we need callcentric for incoming calls.)
This is what my pbxes looks like for 3-b and 3-c.
acegolfer said:
I have not tried Bluetooth with N4. In fact, I don't know where my BT headsets are.
FYI, media5 is a free app with ads. It costs $5 to remove ads.
Click to expand...
Click to collapse
Thanks for the info, but the free version does not support Bluetooth (you need to upgrade to the paid version to enable Bluetooth).
Thanks again... plee3
How about vonage? free calls to numbers in the US
Just wanted to say I followed your guide and it appears to be working great.
Only issue I had was pbxe was sending calls to Google voice and call centric and my T-Mobile number. So I had a bunch of voice mails lol.
Think its all figured out now though. Incoming I have just call centric and out going to Google talk.
*edit
Just had a question, sure I am just being paranoid. But how secure is this setup? Like on the phone giving my social etc can someone listen in?
Also I am getting voice mail notificaion all of a sudden. Can't clear it and Google voice / tmobile show no new mail. Any idea?
Sent from my Nexus 4 using xda app-developers app
plee3 said:
Thanks for the info, but the free version does not support Bluetooth (you need to upgrade to the paid version to enable Bluetooth).
Thanks again... plee3
Click to expand...
Click to collapse
Ic. I didn't pay $5 to get the full media5 version. The little latency in csipsimple didn't bother me in real life settings.
intekmdma said:
How about vonage? free calls to numbers in the US
Click to expand...
Click to collapse
I heard good things about vonage app so I tested vonage on 3g a few days ago. The call quality of vonage was similar to my setup but it had more latency. I believe vonage is using either G729 or iLBC codec but the server is farther than my pbxes server. YMMV.
However, I found a bigger problem with vonage. I couldn't get it integrated with android. This means you need to open the vonage app and type in the 10 digit phone number to make a call. This won't work well when I'm on the fly, which is when I need vonage the most.
ogrillion said:
Just wanted to say I followed your guide and it appears to be working great.
Only issue I had was pbxe was sending calls to Google voice and call centric and my T-Mobile number. So I had a bunch of voice mails lol.
Think its all figured out now though. Incoming I have just call centric and out going to Google talk.
*edit
Just had a question, sure I am just being paranoid. But how secure is this setup? Like on the phone giving my social etc can someone listen in?
Also I am getting voice mail notificaion all of a sudden. Can't clear it and Google voice / tmobile show no new mail. Any idea?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Not too sure about VOIP security. I'm relying on 3 services: GV/callcentric/pbxes so there could be a loose end. For example, I heard that Google "hears" everything. But any wireless company does the same.
I'm guessing you have a voice mail in pbxes because you said it's not GV or Tmo. To clear it, call pbxes voice mail by dialing *97.
In addition, I found csipsimple has a wrong voice mail input for pbxes. Here's how to change it, if you want to long press "1" to access pbxes voice mail or want to change it to GV voicemail number.
http://code.google.com/p/csipsimple/wiki/FAQ
In OP, I recommended pulling rather than pushing to avoid callcentric call forwarding charges. But I may have been wrong about it.
http://www.callcentric.com/features/unlimited_sip_uri_calling
If call forward to SIP URI is free, then callcentric can push the GV calls instead of pbxes pulling GV calls.
1. log in to callcentric.com
2. go to preferences>DID forwarding
3. locate the number that you added to Google Voice. click edit.
4. enter your pbxes SIP URI such as "[email protected]" and save.
I have made several test calls but don't see callcentric (which doesn't have my CC infor) is billing anything.
Why pushing (compared with pulling)?
1. It's faster. Once the phone call is placed, It takes 1 second less for your phone to ring. In my testing, the total time is now about 5 seconds, which is still slow because GV relies on PSTN. OTOH, if a phone call is made directly to @pbxes.org SIP, then it takes 2 seconds to ring. I have convinced my wife to call me using SIP URI.
2. It's more reliable. Pulling requires pbxes to register callcentric and intercept the calls.
3. It's simpler. You can skip steps 3-b and 3-c, which seem to be the confusing part.
I can't imagine they could bill you even if they wanted too without any kind of credit card info. I didn't even put a real name or address so I don't know.. lol.. But it does let me put in any number I want to forward too, I didn't actually try calling though because I am afraid of a bill. I imagine it would say something like this call can't be completed please add credit or whatever.
Its funny I followed your guide, doing all this reading.. for no real reason since i get like 3 calls a month.. Fun learning experience anyway.
Hello I have the EVA09 and like it so far, but 3 things makes it bad
1. using classsic telephone service is slow and bad quality. To start ringing it takes most between 10 and 40 seconds. Every so often it stops the dial prcess after that time. even i have 2 or 3 bars . If than finaly connected interruption misserable voice quality is Standard and makes it unusable for any business purpose (the great camera just can't talk)
2. the Standard Android funktion under Telphone options to add a aco**** for internet calling (SIP account) is missing. Is this a bad joke Huawei ??
3. The T-mobile Feature , WIFI Calling is not available. Who wonders after cut down on a feature as described under 2.
Any words from the comunity how this problems can be fixed ? different rom ? or some fixes for this ?
Thanks a lot
REinhard
As far as I have been told, the model has to be certified by your operator to get VoLTE and HD voice over 3G.
My operator hasn't allowed this yet. (Telenor DK)
I just found out that T-Mobile Germany sells it with the firmaware EVA-L09C150B140 CUSTDEUD004 and update availabe EVA-L09C150B150 CUSTDEUD004, THis would be the key i guess. anybody has this Firmware ?
Any news to this thread WIFI Calling
Hello , since the phone does not support WIFI Calling, Free Texting in the Plane (GOGOAIR) is not possible either, Tmobile requires a WIFI CALL first ....
Nice Camera, but to use it as a phone would be helpfull (phone modul is the worst i had for over 10 years ) Voice quality, connection time, etc.
Ridingboot said:
Hello , since the phone does not support WIFI Calling, Free Texting in the Plane (GOGOAIR) is not possible either, Tmobile requires a WIFI CALL first ....
Nice Camera, but to use it as a phone would be helpfull (phone modul is the worst i had for over 10 years ) Voice quality, connection time, etc.
Click to expand...
Click to collapse
Really, I find that the phone is amazing - maybe it's different expectations - but it holds signal really well, the voice quality sounds great to me too. I would say phone calls is one of the things that this phone does best for me. Sorry to hear that you are having problems.
Maybe there is quality control problems, there is another guy on Reddit who has bluetooth issues, but I haven't had a single issue on that 7 things that I have connected from phone to, from my laptop, to my car to several speakers or my Moto 360 - all have been flawless. Much better than the LG G4 was for me.
bunnybash said:
Really, I find that the phone is amazing - maybe it's different expectations - but it holds signal really well, the voice quality sounds great to me too. I would say phone calls is one of the things that this phone does best for me. Sorry to hear that you are having problems.
Maybe there is quality control problems, there is another guy on Reddit who has bluetooth issues, but I haven't had a single issue on that 7 things that I have connected from phone to, from my laptop, to my car to several speakers or my Moto 360 - all have been flawless. Much better than the LG G4 was for me.
Click to expand...
Click to collapse
Thanks for the answer, might worth to return it and get an exchange.
Use App from store called QuickShortcutMaker
- install App
- launch App
- at Search type "sip " there shall be a space in the end
- Press Try/Launch
- voila
If you configure SIP account, later at Settings / Wireless & Networks / Call Settings, you are able to choose Phone account settings.
Calling out is working, confirmed
Though the menu Sip Settings at the lower region of Phone account settings page is missing on my Emui 8 Oreo P9 (AL10) which once was a Emui 7 Nougat P9 (L19)
so the function about Receiving Calls is missing.
on the other hand with my Note 4 running LineageOS 15.1 Oreo 8.1 , this SIP settings part is available, still calls are not received.
Question, if someone got still Nougat on P9, do you see in Phone account settings the lower part called SIP settings where you can configure Incoming calls and switch it on for Receiving Calls?
ant0nwax said:
Use App from store called QuickShortcutMaker
- install App
- launch App
- at Search type "sip " there shall be a space in the end
- Press Try/Launch
- voila
If you configure SIP account, later at Settings / Wireless & Networks / Call Settings, you are able to choose Phone account settings.
Calling out is working, confirmed
Though the menu Sip Settings at the lower region of Phone account settings page is missing on my Emui 8 Oreo P9 (AL10) which once was a Emui 7 Nougat P9 (L19)
so the function about Receiving Calls is missing.
on the other hand with my Note 4 running LineageOS 15.1 Oreo 8.1 , this SIP settings part is available, still calls are not received.
Question, if someone got still Nougat on P9, do you see in Phone account settings the lower part called SIP settings where you can configure Incoming calls and switch it on for Receiving Calls?
Click to expand...
Click to collapse
I have a second P9 with custom ROM Magic Rainbow (MR) v4 by @Tecalote.
It was based on L09/L19 c432 b398, he added some things (Magisk, K-Settings, Viper4Android) but otherwise the Settings, Phone/Dialer, etc. must be the same as on the stock Nougat/EMUI 5
1) I have no Call Settings under the Settings
2) I can open phone/call Settings only from Dialer app, three dots menu, Settings - and it looks similar to as on Oreo AL10 c00 b540
(On Oreo, Phone Settings can be opened both from general Settings and from Dialer app, three dots menu - here, on Nougat, MR v4, only from Dialer, three dots menu)
3) But in the phone/call Settings (Dialer app, three dots menu), there is no Account (SIP) Settings option
4) By the same procedure like on Oreo:
https://forum.xda-developers.com/showpost.php?p=79552304&postcount=1748
I can add SIP account, and SIP account menu looks just like on Oreo, there is no section about incoming (SIP) calls
5) However, even when I added SIP account by Package Manager (or by Quick Shortcut Maker), there is still no Account Settings option at the bottom of phone/dialer Settings
6) In adding/editing a Contacts, under Add Additional Field, there is no option Internet call, hence I cannot test making an outgoing call like on Oreo
If @ogisha is willing to check, AFAIK, he has still the stock Nougat c432 b504 - does he have some SIP (Account) Settings, or the same like described above for MR v4 ROM
zgfg said:
I have a second P9 with custom ROM Magic Rainbow (MR) v4 by @Tecalote.
It was based on L09/L19 c432 b398, he added some things (Magisk, K-Settings, Viper4Android) but otherwise the Settings, Phone/Dialer, etc. must be the same as on the stock Nougat/EMUI 5
1) I have no Call Settings under the Settings
2) I can open phone/call Settings only from Dialer app, three dots menu, Settings - and it looks similar to as on Oreo AL10 c00 b540
(On Oreo, Phone Settings can be opened both from general Settings and from Dialer app, three dots menu - here, on Nougat, MR v4, only from Dialer, three dots menu)
3) But in the phone/call Settings (Dialer app, three dots menu), there is no Account (SIP) Settings option
4) By the same procedure like on Oreo:
https://forum.xda-developers.com/showpost.php?p=79552304&postcount=1748
I can add SIP account, and SIP account menu looks just like on Oreo, there is no section about incoming (SIP) calls
5) However, even when I added SIP account by Package Manager (or by Quick Shortcut Maker), there is still no Account Settings option at the bottom of phone/dialer Settings
6) In adding/editing a Contacts, under Add Additional Field, there is no option Internet call, hence I cannot test making an outgoing call like on Oreo
If @ogisha is willing to check, AFAIK, he has still the stock Nougat c432 b504 - does he have some SIP (Account) Settings, or the same like described above for MR v4 ROM
Click to expand...
Click to collapse
I manged to reach it with Quick Shortcut Maker on 5.0.5.
How to use it?
ogisha said:
I manged to reach it with Quick Shortcut Maker on 5.0.5.
How to use it?
Click to expand...
Click to collapse
Usage is described here
https://forum.xda-developers.com/showpost.php?p=79552304&postcount=1748
But on Oreo, there is "Internet call" option on Additional field for Contacts, making it possible to make outgoing VoIP calls to the SIP account
zgfg said:
Usage is described here
https://forum.xda-developers.com/showpost.php?p=79552304&postcount=1748
But on Oreo, there is "Internet call" option on Additional field for Contacts, making it possible to make outgoing VoIP calls to the SIP account
Click to expand...
Click to collapse
I do not have "Internet call" option in Contacts / Dialer.
Maybe I will get it after I set up SIP account.
EDIT: Unfortunately, I could not activate "WiFi calling".
FYKI
I just checked the settings in Phone App by Google LLC on Lineage OS 16.0 on my Note 4
all settings about sip calling are available there
Hello,
I have Note8 with Android 9 and I need to connect to SIP (VoIP) server to receive calls.
What I have done:
1. I installed 3 app: Galaxy SIP Settings, Galaxy SIP Accounts, Galaxy SIP Outbound Call Helper.
Galaxy SIP Accounts app - correctly connected to my SIP account. Theoretically app tell me, that recive calls should work. However, this does not work.
Galaxy SIP Settings - this application won't start, message: "Opps - the activity for SIP settings could not be found on this phone".
Galaxy SIP Outbound Call Helper - when I click button "Calling accounts", the phone goes to Dialer > 3 dots > Settings > Other Calls settings > Callings Accounts > All calling Accounts > Here I see data of my SIP accounts and it is activated.
After that, I can call from my phone by SIP number, but any call does not come to my phone.
2. So I instaled another app: QuickShort-cutMaker. I found Activities:
Phone Services > Sip Settings > com.android.services.telephony.sip.sipsettings
and
com.android.serices.telephony.sip.SipPhoneAccountSettingsActivity
but when I click "Ceate" nothing happen. Maybe I don't know where i should look for it?
3. The last app what I install is MizuDroid. And in this app Reciving and outgoing calls working. But... when I left the phone for few minutes with screen off, the app stop work and calls not reciving I have disabled energy saving for this application but still, few minutes with screen off and app dosnt work.
____________
Any other ideas? Becouse of this coronavirus happening, I working at home, and I need reciving calls from work phone...