Related
LineageOS 13.0
[#MARSH]
[#ESPRESSONAME]
[#WHATSLOS]
[#KANGERS]
[#WARRANTY]
[#INFOLOS]
[#DSOURCELOS]
Downloads:
Please use latest espresso-common TWRP to flash this rom, you can find it here.
(Other recoveries might work, but maybe cause issues - don't report flashing or Gapps issues if you use a different recovery!)
Official:
espresso3g (boots on P3100 & P5100)
espressowifi (boots on P3110, P3113, P5110 & P5113)
Unofficial (for testing):
[#DLGITHUBIO]
Extras:
su (arm)
su removal (arm)
Support development
[#DONATETOME]
XDA:DevDB Information
[unified] LineageOS 13.0, ROM for the Samsung Galaxy Tab 2
Contributors
Android-Andi, Ziyan
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Version Information
Status: Testing
Created 2016-01-29
Last Updated 2017-05-14
Reserved
In case someone likes to compile on his own:
You need to setup Linux first, good tutorial here:
Ubuntu / Xubuntu:
- https://nathanpfry.com/how-to-prepare-ubuntu-14-04-lts-trusty-tahr-to-compile-android-roms/
- https://nathanpfry.com/how-to-setup-ubuntu-15-04-vivid-vervet-to-compile-android-roms/
- https://nathanpfry.com/how-to-set-up-ubuntu-15-10-wily-werewolf-to-compile-android-roms/
- https://nathanpfry.com/how-to-setup-ubuntu-16-04-lts-xenial-xerus-to-compile-android-roms/
Arch based Linux ready to go:
- BBQLinux by @codeworkx http://bbqlinux.org/
Once you have synced CM source run the following in terminal:
Code:
mkdir -p .repo/local_manifests
nano .repo/local_manifests/local_manifest.xml
Add the following to your local_manifest.xml:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_samsung_espressowifi" path="device/samsung/espressowifi" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_device_samsung_espresso3g" path="device/samsung/espresso3g" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_kernel_samsung_espresso10" path="kernel/samsung/espresso10" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_packages_apps_SamsungServiceMode" path="packages/apps/SamsungServiceMode" remote="github" revision="cm-13.0" />
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="cm-13.0" />
<project name="TheMuppets/proprietary_vendor_ti" path="vendor/ti" remote="github" revision="master" />
</manifest>
Save the file.
Back in terminal:
Code:
repo sync
. build/envsetup.sh
breakfast espressowifi
make bacon
(you can replace espressowifi with espresso3g if you like to build for p3100/p5100)
Wow, amazing
Great job, as always.
Are there any known bugs?
Haverex said:
Are there any known bugs?
Click to expand...
Click to collapse
Keyboard will FC if you flash Gapps.
In this case you need to flash https://www.androidfilehost.com/?fid=24391638059058223 by @Deltadroid directly after gapps.
- should be fixed on next build i hope.
Android-Andi said:
Keyboard will FC if you flash Gapps.
In this case you need to flash https://www.androidfilehost.com/?fid=24391638059058223 by @Deltadroid directly after gapps.
- should be fixed on next build i hope.
Click to expand...
Click to collapse
Hi Andi, i'm using this since yesterday and it's pretty stable, i haven't any crash or so, but i'm having a strange issue with sdcard.
It get mounted and I can see it in the native file manager from which I can read and write, but other app can't read it, for example Music doesn't find any song. Going to mnt/media_rw/(sdcard-name) i can see the SDcard but if I try to open a song or an APK it gives me "I/O error". What could be?
(log attached if could help)
Thank you Andi
I will repeat again and again about you Andi.....KUDOS :good::good::good:
Android-Andi said:
Keyboard will FC if you flash Gapps.
In this case you need to flash https://www.androidfilehost.com/?fid=24391638059058223 by @Deltadroid directly after gapps.
- should be fixed on next build i hope.
Click to expand...
Click to collapse
Adaptive storage works??
WOW Thank You Andi nice work again
iks8 said:
Adaptive storage works??
Click to expand...
Click to collapse
Haven't added the fstab changes for it. Its on the todo list too. Think sometimes tomorrow i am able to upload a new build, else on monday.
There's a lot of really big work going on ATM:
- common TWRP for all Tab2 variants (P31XX and P51XX will share same recovery).
Only bad side will be, that older builds won't be flashable without manually editing the updater-script inside the rom.zip (all my builds from today and newer will be able to use it) - but older recoveries still can be used.
After that sometimes later (currently testing):
- P3100 and P5100 will share same build
- P311X and P511X will share same build
This reduces build time by 50% and makes maintaining easier again.
Gesendet von meinem LG-H815 mit Tapatalk
Wow everything works as perfect as it was on 12.1! I'm surprised
Only youtube 720p 60fps playback seems to be broken, but that's not a big deal
Sent from my GT-P3110 using Tapatalk
@Android-Andi anyway you can help build a rom for the Tab 4 SM-T230NU? sorry I have a tab 2 and now a tab 4 so its weird that tab 2 has a rom and tab 4 does not. any help would be appreciated. Thanks for your work!
Anyone here have a rotation problem? Or just me?
(Wait, how to make emoticon?!)
Earlier I was waiting desperately to see MM on my tab but now I m unable to decide which one to flash
#floodofMM #yolo
Sent from my GT-P3100 using Tapatalk
dev8 said:
Earlier I was waiting desperately to see MM on my tab but now I m unable to decide which one to flash
#floodofMM #yolo
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Am flashing each and everyone to test they build for us so we test for them or u stick to any one and report back
bkrishna963 said:
Am flashing each and everyone to test they build for us so we test for them or u stick to any one and report back
Click to expand...
Click to collapse
I appreciate you bro
My sixth sense has seen the bright future of marshmallow on our tab #lol
So now I'm downloading Open gapps aroma 6.0.
Report soon
Sent from my GT-P3100 using Tapatalk
rendrafit said:
Anyone here have a rotation problem? Or just me?
(Wait, how to make emoticon?!)
Click to expand...
Click to collapse
Apparently you aren't the only one . It sometimes works sometimes doesn't
Is 3G and Cellular working?
Hi,
Andi thanks for CM13. Can anybody tell about 3G and cellular working for P3100? as i am using for my business work.
Thanks in advance
Thanks Andi.
Trying to format my SD as portable within USB Storage setting, receiving system error - command 19 volume partition error... My TWRP is 2.8.7.2, have 32GB SD. Anyone facing the same ?
Any app don't recognize SD card.I can read the SD card in settings but I can't even download anything in SD card. Even UC browser doesn't recognise SD card.
Any fix....pls
Please do not use this ROM. Please use the other development ROM link below
http://forum.xda-developers.com/moto-g/4g-development/rom-cyanogenmod-14-0-t3469103
Date: 02.OCT.2016
DO NOT USE THIS
Perhaps your warranty is already void. Otherwise you would not be here!
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a compilation of nougat (staging/cm-14).
All code is open source. Download as follows if you have repo installed. Use depth=1 to reduce traffic.
Code:
repo init -u git://github.com/CyanogenMod/android.git -b staging/cm-14.0 --depth=1
repo sync
Your local manifest:
Code:
YOUR_FOLDER/.repo/local_manifests/roomservice.xml
<project name="CyanogenMod/android_device_motorola_peregrine" path="device/motorola/peregrine" remote="github" revision="cm-14.0"/>
<project name="CyanogenMod/android_device_motorola_msm8226-common" path="device/motorola/msm8226-common" remote="github" revision="cm-14.0"/>
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" revision="cm-14.0"/>
<project name="CyanogenMod/android_kernel_motorola_msm8226" path="kernel/motorola/msm8226" remote="github" revision="cm-14.0"/>
<project name="TheMuppets/proprietary_vendor_motorola" path="vendor/motorola" remote="github" clone-depth="1" revision="cm-14.0"/>
To compile.
Code:
repo sync
brunch peregrine
Everything seems to work. Please verify MD5SUM
915c9645d3c6bbece9195fde48fca7c8 cm-14.0-20160922-UNOFFICIAL-peregrine.zip
Warning: I have not tried installing GAPPS. I use all ROMs without GAPPS using F-droid (www.fdroid.org) open source apps.
Give a big thanks to all open source developers. It is all unofficial so do NOT ask CM for support.
See in the top tab bar for downloads and screen shots.
DISCONTINUED
http://forum.xda-developers.com/devdb/project/?id=17142#downloads
HOWTO: BACKUP ALL FILES
1. Copy to internal storage. YES, in MTP choose internal storage.
2. reboot to TWRP
3. Factory reset; Wipe dalvik/cache; wipe system.
4. Install and reboot
Note: I had enabled extended storage from Marshmallow, _at least_ for me, it automatically recognised with all files safe. YMMV, please backup!
XDA:DevDB Information
UNOFFICIAL nougat CM-14 for MotoG LTE peregrine, ROM for the Moto G
Contributors
sandravictoria, contributors to previous ROM
Source Code: https://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-09-22
Last Updated 2016-09-22
Now tried the room myself.
While its not ready as a daily driver (crash on call), it looks very promising.
Performance is similar to CM13, maybe better.
The good thing is the free ram.
I was getting 550+ mb free with WhatsApp in background. This is extremely useful for our 1gb device.
I suggest to try this rom if you don't really need your moto as a primary phone.
Awesome work, thanks!
Tested the ROM as well, boots fine (no GAPPS).
Phone calling doesn't work, phone soft-reboots.
Camera is working fine (front and back) but video recording is broken.
Everything else, aside from some minor visual glitches, seems to be working fine, thanks!
Ha you bet me to it I was going to create a thread this weekend.
Some things to add -
atm only clean install is supported you will get FCs if you coming from another CM/android version and don't full wipe so do a nandroid if you plan on going back.
I have tested Opengapps briefly and it seemed fine atm.
In terms of issues and the like it should be the same as this list - http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-14-0-t3458931
I found this version of CM14 that such works , Which is better this or @LuK1337?
https://www.androidfilehost.com/?fid=457084094631641100
Sorry bad english
Kayant said:
Ha you bet me to it I was going to create a thread this weekend.
Some things to add -
atm only clean install is supported you will get FCs if you coming from another CM/android version and don't full wipe so do a nandroid if you plan on going back.
I have tested Opengapps briefly and it seemed fine atm.
In terms of issues and the like it should be the same as this list - http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-14-0-t3458931
Click to expand...
Click to collapse
And I still expect you to do it :^)
LuK1337 said:
And I still expect you to do it :^)
Click to expand...
Click to collapse
Savage!
Yes boss [emoji1]
Sent from my XT1039 using Tapatalk
Kayant said:
Savage!
Yes boss [emoji1]
Sent from my XT1039 using Tapatalk
Click to expand...
Click to collapse
LuK1337 said:
And I still expect you to do it :^)
Click to expand...
Click to collapse
sebaalbo98 said:
I found this version of CM14 that such works , Which is better this or @LuK1337?
https://www.androidfilehost.com/?fid=457084094631641100
Sorry bad english
Click to expand...
Click to collapse
FINALLY! I'm in tears after seeing this, and for those who are desperate to have camcorder features on their phone, use Google Camera EXPLICITLY designed for Nougat (version 4 at the time of writing).
I am, let's just say, speechless, about this, so thank you all, and on that note, I'm going to test the Luk1337 version as immediately as possible.
aha360 said:
FINALLY! I'm in tears after seeing this, and for those who are desperate to have camcorder features on their phone, use Google Camera EXPLICITLY designed for Nougat (version 4 at the time of writing).
I am, let's just say, speechless, about this, so thank you all, and on that note, I'm going to test the Luk1337 version as immediately as possible.
Click to expand...
Click to collapse
I'm just trying versions, but my internet is really slow.
PD: I found another vesion developed by @Dark98
https://www.androidfilehost.com/?fid=24727369092696474
Hi guys!
I almost cry seeing this post on front page of this forum, I've been testing the two builds (OP's post and @LuK1337) and I gotta say THANK YOU!
On the LuK1337's build the Phone (Using Open Gapps) is working but not the camera (Google Camera, photos only, not videos) on the OP's build the Phone crashes whenever I receive or make a call, sadly Google Play Services crashes often, after some time it tends to stop. Seems I can't install Apps using Cyanogenmod File Manager, why?
Special thanks to @sebaalbo98 (for mentioning the other build) and @aha360 (for the Google Camera thing, it works if you do what he/she says) and obviously the OP and LuK1337!
I have a question about the Quick Reply thingy, when I reply why does it close itself? I don't remember where I saw that you can keep using the Notification as a little chat (send message the notification stays and you can keep using it without closing) other thing is, if I'm writing on it and the person (or another) sends another message it closes itself and erase what I was writing... or maybe that's the way Google did it
Guys... guys... GUYS as a P.D. you can change the DPI without root or using a File Manager, simply enable the Developer Settings and modify "Smallest Width" for example 600 or 689 and BOOM! tablet's display resolution. This is incredible, I'm going to test this using it daily (maybe only this weekend lol)
Hi guys, thanks for the porting. I tried Luk version, but I can't find the thread here on xda. Can someone link it to me? Anyway I have a little request, either for @LuK1337 or @sandravictoria : can you please implement the getAllCelInfo() method in TelephonyManager? As I use an app (CellMapper) which needs that, and now with Nougat I can't use it anymore. I am on xt1039. Thanks!!
Inviato dal mio LG-D855 utilizzando Tapatalk
Today's version of CM14 of @LuK1337
https://www.androidfilehost.com/?fid=312968872162492542
So far it works quite smoothly me
@Lurker-Observer thanks for the tip!
Luk's version (23rd Sept) is working fine so far, even calls!
And it seems stable.
mrk2006 said:
Hi guys, thanks for the porting. I tried Luk version, but I can't find the thread here on xda. Can someone link it to me? Anyway I have a little request, either for @LuK1337 or @sandravictoria : can you please implement the getAllCelInfo() method in TelephonyManager? As I use an app (CellMapper) which needs that, and now with Nougat I can't use it anymore. I am on xt1039. Thanks!!
Inviato dal mio LG-D855 utilizzando Tapatalk
Click to expand...
Click to collapse
Luk has no thread on moto g 4g, simply thread moto g 2014 http://forum.xda-developers.com/moto...-14-0-t3458931
To operate video recording must use this camera http://www.apkmirror.com/apk/google...amera-4-1-006-126161292-android-apk-download/
mrk2006 said:
Hi guys, thanks for the porting. I tried Luk version, but I can't find the thread here on xda. Can someone link it to me? Anyway I have a little request, either for @LuK1337 or @sandravictoria : can you please implement the getAllCelInfo() method in TelephonyManager? As I use an app (CellMapper) which needs that, and now with Nougat I can't use it anymore. I am on xt1039. Thanks!!
Inviato dal mio LG-D855 utilizzando Tapatalk
Click to expand...
Click to collapse
You realize that this function should be in API already? I don't feel like breaking Android API.
Seems that the issue of the soft reboot is being solved with the 23/9 update.
I had already installed all of my apps to the yesterday´s version when i discovered this issue and i tried to perform a dirty flash.
Now everything continues to be ok and no more crash when receive calls.
Nice work guys!
Cyanogenmod File Manager won't let me install Apps, but if you use another FM like Amaze it would work... oh wait, you CAN NOW USE the internal File Manager to install Apks!
So, guys I figure it out about the "Notifications Direct Reply" the mini chat window on notifications needs to be implemented from the developers, the only two Apps that are working on that feature are Google Messenger and Google Hangouts.
I haven't tried the last build, I can say that this is usable as a daily driver, the only problems are some little bugs (Like App crashes but it would stop after the first boot, or some Settings changes that don't work, for example using the volume keys to control media volume instead of ringtone volume)
Also if you want to encrypt I can post the guide that I did some time ago on the CM13 thread.
And the background updates looks awesome, no more "Optimizing" thing.
Lurker-Observer said:
Cyanogenmod File Manager won't let me install Apps, but if you use another FM like Amaze it would work... oh wait, you CAN NOW USE the internal File Manager to install Apks!
So, guys I figure it out about the "Notifications Direct Reply" the mini chat window on notifications needs to be implemented from the developers, the only two Apps that are working on that feature are Google Messenger and Google Hangouts.
I haven't tried the last build, I can say that this is usable as a daily driver, the only problems are some little bugs (Like App crashes but it would stop after the first boot, or some Settings changes that don't work, for example using the volume keys to control media volume instead of ringtone volume)
Also if you want to encrypt I can post the guide that I did some time ago on the CM13 thread.
And the background updates looks awesome, no more "Optimizing" thing.
Click to expand...
Click to collapse
Whatsapp also can be answered from the notification
sebaalbo98 said:
Whatsapp also can be answered from the notification
Click to expand...
Click to collapse
Yes sir.
But I'm talking about Direct Reply without closing itself: https://www.android.com/versions/nougat-7-0/ jump to Notification Direct Reply, the Google Messenger App allows you to use the chat inside the notification without closing itself after you send the message.
im getting error 7 with twrp, why?
moved back to cm11-KitKat (@Adam77Root) vendors and HEX-edited libnvos.source = p880DEV/aosp6 kernel + originalLG vendors + @alfsamsungpatches + mourta widevine
cons: blurred video thumbnails & QR&barcode not working due to CM11vendors.
Code:
[SIZE="1"]<manifest>
<remote name="bitbucket"
fetch="https://bitbucket.org/" />
<project name="LineageOS/android_external_busybox" path="external/busybox" remote="github" revision="cm-14.1" />
<project name="LineageOS/android_external_stlport" path="external/stlport" remote="github" revision="cm-13.0" />
<project name="lenzwagner/android_device_lge_p880" path="device/lge/p880" remote="github" revision="marshmallow" />
<project name="oF2pks/cmp880devkernel" path="kernel/lge/x3" remote="bitbucket" revision="Los13" />
<project name="oF2pks/proprietary_vendor_widevine" path="vendor/widevine" remote="bitbucket" revision="Vanir-N" />
<project path="vendor/lge" name="lenzwagner/proprietary_vendor_lge" revision="marshmallow" />
<remove-project name="LineageOS/android_packages_apps_CMUpdater" />
<remove-project name="LineageOS/android_packages_apps_Gello" />
</manifest>
[/SIZE]
Rom features:
-ScreenRecorder
-Xposed-able https://forum.xda-developers.com/showthread.php?t=3034811 (checked , GravityBox, InstallerOpt )
-kexec-ed (MultiROM)
-ButtonBacklight
-Widevine L3 (drm broadcast)
-WakelockBlocker
-AlarmBlocker
-f2fs Ver1.6 (wip)
-Reboot to Recovery
-(NO more keyboard BugFix & NoOverlayWarning & WebView & CM12audioFX-music.zip needed)
-MicroG-ified
-Bromite latest webView v76 with ad-blocking
Installation : wipe and flash in order
a)ROM https://androidfilehost.com/?fid=4349826312261650905
z)Xposed
z)Gapps ( or PlaystoreONLY and Google CalendarSync addon)
z)SuperSU & reboot =>2x auto-boot
Nota: MicroG & CalendarSync need specific in-built permissions to be granted.
Recommended app : SuperSu attached 2.82 twrp/zip + app install), Deltadroid's GApps, Greenify, BetterBatteryStat;
Kernel (cm/aosp7): take time to check with Kernel Adiutor(0.9.9.4 attached post#3), that swap meet you desires, disable KSM + rise dirty_writeback&expire for better battery
echo "0" > /sys/kernel/mm/ksm/run;
sysctl -w vm.dirty_writeback_centisecs=2000;
sysctl -w vm.dirty_expire_centisecs=1000;
sysctl -w vm.vfs_cache_pressure=50;
sysctl -w vm.swappiness=50;
GPL* aosp7 SELinux permissive
-check attached image from @ csk1jw 's aosp7-2016-12-07 post#2
-multirom : http://forum.xda-developers.com/showpost.php?p=67882937&postcount=21
-livedisplay/bandwith : http://forum.xda-developers.com/showpost.php?p=68213357&postcount=670
-perl/timeconst : http://review.cyanogenmod.org/#/c/104105/
Kernel GPL
microG compatible PlaystoreONLY (including Google ContactsSyncAdapter), to flash simultaneously with rom : https://www.androidfilehost.com/?fid=889764386195912422 ; once rebooted it will auto-update to latest version and survive OTA (thx @Deltadroid ); same for GoogleCalendarSyncAdapter.
Bromite latest webView v76 with ad-blocking, upgradable via F-Droid repo https://fdroid.bromite.org/fdroid/repo (Bromite 76 returns a 74/SamsungS9 webclient https://github.com/bromite/bromite/issues/156#issuecomment-445449741: Mozilla/5.0 [Linux; Android 8.0.0; SM-G960F] AppleWebKit/537.36 [KHTML, like Gecko] Chrome/74.0.3729.157 Mobile Safari/537.36); if v76 seems too selective, upgrade to latest Bromite without ad-blocking (v78).
Otherwise switch to official com.google.android.webview via regular install + 1 reboot.
Latest custom MicroG edition can be found here : https://forum.xda-developers.com/pr...arm64aosp-9-0-0r21-microg-ufofficial-t3878115
News
With LineageOS 13 you can :
-answer phone call straight with home button, whatever busy is android M
-launch Camera on sleeping phone with 2x power button
-flash LineageOS' addonsu https://download.lineageos.org/extras
-manage Doze settings directly: https://forum.xda-developers.com/android/apps-games/root-doze-settings-editor-android-t3235130
-lightweight p880 with SuperSu Recently
...
Video Calling ??? Any update???
Salman Al-Badgail said:
Video Calling ??? Any update???
Click to expand...
Click to collapse
You tell me... Best will be to track Euphoria 5 to understand it: I tried once but didn't see any thing related; vendor in los13 are same origin (alfsamsung) than Euphoria 5 but they are hacked to fit Marshmallow new policies : http://dmitry.gr/index.php?r=06. Thoughts&proj=04. Android M on Grouper
To get all things better we could move to further modif like https://github.com/Unlegacy-Android/proprietary_vendor_nvidia/commits/aosp-6.0/grouper
I am kinda confused, is this ROM has aosp6 kernel or the newest in aosp7?
New build CVE-2017 June
New build : CVE-2017 June https://www.androidfilehost.com/?fid=817550096634778703
With @Deltadroid packages : no need to reflash Webview\Gapps\CalendarSync on upgrade, only [Rom+CM12audioFX-music.zip(+Xposed+su)].
b886b said:
I am kinda confused, is this ROM has aosp6 kernel or the newest in aosp7?
Click to expand...
Click to collapse
Kernel aosp7 2016-12-07 GPL* aosp7 SELinux permissive
-check attached image from @ csk1jw 's aosp7-2016-12-07 post#2
-multirom : http://forum.xda-developers.com/showpost.php?p=67882937&postcount=21
-livedisplay/bandwith : http://forum.xda-developers.com/showpost.php?p=68213357&postcount=670
-perl/timeconst : http://review.cyanogenmod.org/#/c/104105/
Thanks for the work she still invests into this device
Just to make sure I've read this right:
microG is already built-in?
It's MultiROM compatible, but MultiROM is not a requirement? (I rarely boot, so for me MultiROM would be overkill – no need keeping everything twice)
NO GApps are built-in (so one can keep it Google-free)?
As it's LOS based, no Superuser capabilities are built-in (but must be flashed afterwards if wanted)?
If I'm right with that, anyone tried it with Magisk? I'm considering to switch from "hard SU" to systemless root with Magisk (and what better time to do so then with a fresh install?), but if someone has experience with that (especially on this ROM), feedback would be very welcome!
oF2pks said:
Recommended app : SuperSu(2.79 twrp/flash + app install)
Click to expand...
Click to collapse
For me it's complicated.
You recommend the supers 2.79, and give the link that directs to version 2.82.
Did you mean recommendation supersu stable?
ze7zez said:
For me it's complicated.
You recommend the supers 2.79, and give the link that directs to version 2.82.
Did you mean recommendation supersu stable?
Click to expand...
Click to collapse
Stable 2.78 works fine on both primary and secondary rom, I'm not 100% sure but 2.8x focus on N and O new security stuff, so I didn't try them already, but some beta can bootloop on secondary install; anyway, once flashed, you can still upgrade app 2.7x live to latest and reboot.
Also you can patch LOS with su addons https://download.lineageos.org/extras .
( @svv3000 , Post #2 updated with minimal PlaystoreONLY.zip for microG + paid app.)
oF2pks said:
Stable 2.78 works fine on both primary and secondary rom, I'm not 100% sure but 2.8x focus on N and O new security stuff, so I didn't try them already, but some beta can bootloop on secondary install; anyway, once flashed, you can still upgrade app 2.7x live to latest and reboot.
Also you can patch LOS with su addons https://download.lineageos.org/extras .
( @svv3000 , Post #2 updated with minimal PlaystoreONLY.zip for microG + paid app.)
Click to expand...
Click to collapse
Thanks, @oF2pks! PlaystoreONLY is not necessary. I have tried a X-los13-201706-ufoHYBRID-p880.zip and fully satisfied. Many thanks for you one more time!
SuperSU 2.82 works fine and stable, by the way, on this ROM.
MicroG + patched Playstore also work. I had a some troubles with authorization in Google services (as result, MapsAPI was dead too). After success with authorization I had a problem with access to the Playstore content (and maps). But, a little bit of shamanistic dances with a tambourine... and all is fine.
GPS is OK. Camera (photo and video) is OK. Calls (except video calls - haven't try) is very good, but a small delay with the output to the screen is present. No freeze and reboot. Very good battery using (0.5-0.8% per hour with my very old battery, when I don't touch a phone)! Time to time a slight lethargy is happened, especially when using one of number opened apps and receive an incoming call.
But, in total - it's best ROM for P880 of all tested (original, Euphoria, AOSP, CM...)
Izzysoft said:
Thanks, @oF2pks! Flashing Gapps or Nougat is not an issue for me (I don't want either: I much more prefer microG and XPosed). So I'm waiting for your update of post #1 then to know whether to update TWRP and to what. If a special formatting is required (or another strongly discouraged), please point that out as well. Currently I'm running your LP build, with /system formatted as ext4.
What's also not clear to me is what you mean by "MicroG & CalendarSync need specific in-built permissions to be granted": CalendarSync (according to the list there) seems only relevant with Gapps, so I can ignore that. But what is expected to run for those "special grants" – or does your image already take care for that with regards to microG, as you list "MicroG-ified" with the "Rom features"? And by "MictoG-ified" you mean GmsCore incl. signature-spoofing and GsfProxy – so one would just need to add desired backends for UnifiedNlp?
And while you recommend SuperSu: Any hint on Magisk/MagiskSU? If that ROM comes without internal SU, I thought to give systemless-root a try (not that I had any issues with the other, no apps in use that could fail because of SafetyNet or the like – but AFAIK MagiskSU is completely open-source )
Oh: And does your TWRP build include MultiROM? Maybe I misunderstood what you wrote in this regard; did you mean: "Flash this TWRP with MultiROM, and then flash the MM ROM in parallel to your current LP to try it out"? I'm a bit confused now
Click to expand...
Click to collapse
-(Google)CalendarSync needs Calendar permission (check also native Calendar & CalendarStorage permissions)
-Spoof package Signature in all permissions section needs: on for microG services app. (this is the buit-in secure Marvin ROM patch).
-Latest microG app 2.4.9x needs registration activated in microG_app/menu for official Playstore (?) and could needs one reboot.
SuperSU works fine and always has real better efficient security checks (thx Chainfire).
Warning: on all MM &N, if you have wifi extender on same general router, switching from extender wep, to general router wep won't allow you to come back to extender connection (infinite waiting). I checked that on both p880 & Asus_tf700 and I'm 99% sure it's not kernel (works ok with same kernel on L with both p880 & tf700, or other modern devices with MM or N), neither rom or device tree: probable missing vendor location normalization (check post#5), since MM new policy. Also audio/music is not as cleared than my latest cm12.1
The working trick is to use multirom: forget wifi router on MM &N, reboot to L KK or even lgJB and switch twice, then reboot to MM and open wifi extender wep.
Latest multirom : https://www.androidfilehost.com/?w=files&flid=146943
One more question. I didn't find a "performance" option in "settings", like on CM13. And in statistics of BetterBattery I saw 1500 as maximum frequency of CPU. Is it possible to rise up a frequency to 1700 on this ROM and how (by system settings, not by App's)?
As this wasn't answered yet: If I got that right, other than CM, LOS does NOT ship with any superuser built-in. So did anyone try the ROM with Magisk and MagiskSU? For one, that'd be a FOSS solution, and then there are several nice features it offers. So my thoughts were whether it would be worth a try when "starting from the scratch" anyway.
oF2pks said:
Nota: MicroG & CalendarSync need specific in-built permissions to be granted.
Click to expand...
Click to collapse
Thanks for updating the initial post! Could you include some details on the quoted line, maybe in the "spoiler section"? Especially for the microG part. Again: I understand correctly that "MicroG-ified" just refers to the signature patch, but one would need to install the framework separately? Must be so as otherwise one couldn't flash Gapps, I guess
And one more question: When you finally update the first post with the TWRP stuff you've planned for it (especially which TWRP version [link] you recommend), I'm still confused on the MultiROM part. I've never used that. So: Does your TWRP build already include MultiROM? If not, in which step must MultiROM [link] be flashed? And if I have your LP build running before I start the procedure on MM, can I then simply install this LOS build as second ROM, keeping LP as first?
(Sorry for delay: broken computer os)
svv3000 said:
One more question. I didn't find a "performance" option in "settings", like on CM13. And in statistics of BetterBattery I saw 1500 as maximum frequency of CPU. Is it possible to rise up a frequency to 1700 on this ROM and how (by system settings, not by App's)?
Click to expand...
Click to collapse
No our aosp/cm kernel does not support, personally I even go for ondemand governor.
Everything can be set with KernelAdiutor or similar control/performance app.
Izzysoft said:
...Again: I understand correctly that "MicroG-ified" just refers to the signature patch, but one would need to install the framework separately? Must be so as otherwise one couldn't flash Gapps, I guess
And one more question: When you finally update the first post with the TWRP stuff you've planned for it (especially which TWRP version [link] you recommend), I'm still confused on the MultiROM part. I've never used that. So: Does your TWRP build already include MultiROM? If not, in which step must MultiROM [link] be flashed? And if I have your LP build running before I start the procedure on MM, can I then simply install this LOS build as second ROM, keeping LP as first?
Click to expand...
Click to collapse
I use microG+Playstore (Cal_sync)+embedded email and NO GoogleSearch or others; if you need Gmail.app, imho, it's better to use normal Gapp for battery and performance.
Concerning Multirom you can use latest
twrp for all flash operations : https://www.androidfilehost.com/?fid=529152257862714405
multirom.zip which patch first rom boot.img with menu selection (& all adb operations) https://www.androidfilehost.com/?fid=817550096634757304
All my kernels are kexeced https://en.wikipedia.org/wiki/Kexec
You can use Cyospak on top of aosp7 (but primary rom only) and get all your roms (KK L MM) on secondary or even use a boot.img only on primary . I usually use primary for rom testing because flashing via twrp is much faster on primary vs 2nd. Then when I need access to 2nd, I just flash multirom.zip ; once done you have 3 diff linux : twrp + multirom stand-by + rom (+all 2nd). It can be useful to keep secure f2fs/data (wip) on one rom only.
Try to flash rom with no more update on 2nd. I will update more explanation...
oF2pks said:
(Sorry for delay: broken computer os)
No our aosp/cm kernel does not support, personally I even go for ondemand governor.
Everything can be set with KernelAdiutor or similar control/performance app.
Click to expand...
Click to collapse
Thanks for your reply. I think your opinion about customization of the performance (and others too) is correct. Of course, KernelAdiutor is quite convenient to use and will satisfy most of the needs in the configuration. Never had problems with using it.
hi guys, noob here
just installed the rom, and now ive lost root access and dunno how to boot to my recovery (twrp 3)
i used third party apps to boot to twrp but now they request for root access which i dont have
i dunno the key combination for accessing the recovery
so now i want my root access back and a way to access my recovery
thx so much guys really need ur help
Izzysoft said:
As this wasn't answered yet: If I got that right, other than CM, LOS does NOT ship with any superuser built-in. So did anyone try the ROM with Magisk and MagiskSU? For one, that'd be a FOSS solution, and then there are several nice features it offers.
Click to expand...
Click to collapse
Magisk is really useful for modern devices to provide SafetyNet : using it with Oneplus5, Google always fight to broke it every week (AndroidPay) and when you loose Magisk, you loose all your setups; thus, imho ,SuperSu provides a much stable & secure with old p880 regular/system. But you should try installing csk1jw's ('pure') AOSP as primary rom, without Gapps, and with Magisk + MicroGNanomod https://forum.xda-developers.com/apps/magisk/module-nanomod-5-0-20170405-microg-t3584928
Then flash kexeced Cyospak to access Multirom with los13 & others as secondary. I didn't have much time, but I will try this soon; for now I have los13 on primary due to fastest flash time (vs 2nd slots).
Will update los13 on next August Cve upgrade.
4xhd noob said:
hi guys, noob here
just installed the rom, and now ive lost root access and dunno how to boot to my recovery (twrp 3)
i used third party apps to boot to twrp but now they request for root access which i dont have
i dunno the key combination for accessing the recovery
so now i want my root access back and a way to access my recovery
thx so much guys really need ur help
Click to expand...
Click to collapse
Fist, if you were using SuperSu before, try easy install back SuperSu.apk only ( and check binaries).
Otherwise
-PowerOff : press [Volume Down & Power Button] until logo
or (check Developer Options)
-USB/adb : adb shell setup-recovery + adb reboot
BTW , reboot to recovery is included via AdvancedReboot option , (check Developer Options)
Izzysoft said:
What's also not clear to me is what you mean by "MicroG & CalendarSync need specific in-built permissions to be granted": CalendarSync (according to the list there) seems only relevant with Gapps, so I can ignore that. But what is expected to run for those "special grants" – or does your image already take care for that with regards to microG, as you list "MicroG-ified" with the "Rom features"? And by "MictoG-ified" you mean GmsCore incl. signature-spoofing and GsfProxy – so one would just need to add desired backends for UnifiedNlp?
Click to expand...
Click to collapse
Coming with MM (& N), are dynamic permissions, and so is build MicroG: if you don't grant permission explicitly, security won't allow signature faking; and CalendarSync needs Calendar permission. I will post attached screenshot very soon.
Concerning Multirom, I will update the dedicated thread with more info, but the whole thing is open source (from the beginning) : https://github.com/Tasssadar/multirom/wiki/Introduction
svv3000 said:
But, in total - it's best ROM for P880 of all tested (original, Euphoria, AOSP, CM...)
Click to expand...
Click to collapse
I agree, this ROM is by far the best one for this old but (theorically at least) still capable device.
Thanks a lot oF2pks
David
Code:
**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****
Welcome to COSP, your new future Android Operating System.
Our goal is to have an Pixel-like android ROM that isn't spying on you and uses as few system space as possible. Also, we provide the option to go completely without GApps using MicroG support.
Why us?We are focusing on stability and performance, having an debloated ROM is essential for that. Also, we want Users to decide what kind of Store they want to use, either F-Droid or the Play Store.
Also, we take User requests serious. To suggest something, contact us on telegram.
Features
1) All systemUI tuning elements
2) An handy Network indicator
3) Charging Information
4) Lawnchair and Quickstep as default
5) Quick Settings mods
6) Signature spoofing
7) OP gestures
8) Navbar tuner
9) Rootless Substratum (with fixes to theme system correctly)
10) Screenshot/screenrecord tile
11) Advanced power menu
12) Double tap to sleep on statusbar
13) Option to disable quick settings/power menu on secure lockscreen
OTA Updating for official devices enables Users to get the newest version with ease.
Thanks to RuinWMD666 for maintaining this ROM!Installation
Code:
[LIST=1]
[*]Format data
[*]Reboot
[*]Wipe Caches,System,Vendor,Data[B](DON'T REBOOT AFTER WIPING VENDOR)[/B]
[*]Install Vendor(9.8.1) and ROM and Gapps
[/LIST]
LINKSLatest ROM
Project website
Sources:
ROM Source: https://github.com/cosp-project/ [
Kernel Source code: https://github.com/EviraKernel/Officialmi9
Device tree: https://github.com/markakash/device_xiaomi_cepheus
XDA:DevDB Information
[ROM][Pie][OFFICIAL] COSP [9.0.0][cepheus][2019/10/26], ROM for the Xiaomi Mi 9
Contributors
Giton22, RuinWMD666, markakash,resurrect
Source Code: https://github.com/cosp-project/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2019-10-26
Created 2019-10-26
Last Updated 2019-10-26
reserved
reserved
Tried the ROM, it's really stable and better than all ROMs I have tried for Mi 9, even Battery is performing like stock firmware, Good Work
No bug until now
I'm trying the new construction and it looks great; Is it possible to have the torch on the power button?
Is SELinux enforcing or permissive? VoLTE?
What vendor image are you guys using?
mr3p said:
Is SELinux enforcing or permissive? VoLTE?
Click to expand...
Click to collapse
Permissive. Volte works.
nvidiageek said:
What vendor image are you guys using?
Click to expand...
Click to collapse
9.8.1 is recommended!
Is there a way to get Pixel style navbar icons instead of Xiaomi's?
Thanks for the development. I am using it since 1 day and I am quite satisfied. Everything works fine (including dt2w) and the ROM seems stable so far. Battery idle drain is around 1 to 1.5 % which is okay, but I will check during the next days to get a final conclusion. Again, thanks.
Do the screen refresh overclocking mods work on this?
Do you have more information about the OP gestures? Trying to get this to work.
I spent some time to flash COSP BUT i still rolled back PE+ with Los kernel base. Some reasons here:
1.Security is outdated.(It' still in Sep-2019)
2.Phone and message app are outdated as well and cannot be changed into black theme.
3.Cannot install Dolby sound mod.
Kris
Kris Chen said:
I spent some time to flash COSP BUT i still rolled back PE+ with Los kernel base. Some reasons here:
1.Security is outdated.(It' still in Sep-2019)
2.Phone and message app are outdated as well and cannot be changed into black theme.
3.Cannot install Dolby sound mod.
Kris
Click to expand...
Click to collapse
1. It's October, Google messed the name up.
2. Umm, install newer ones.
3. It's a phone!
?
Giton22 said:
reserved
Click to expand...
Click to collapse
Szia !
Telepítési útmutató ?
Gapps is kell hozzá ? Kamera milyen van benn alapból ?
Köszi
juve60 said:
Szia !
Telepítési útmutató ?
Gapps is kell hozzá ? Kamera milyen van benn alapból ?
Köszi
Click to expand...
Click to collapse
Hi! Please avoid other languages than English!
If you can't speak english please write me a DM or contact on Telegram!
Hold Back to kill running app, do we have this feature?
BigsyBiggins said:
Do the screen refresh overclocking mods work on this?
Click to expand...
Click to collapse
Yes, i'm on 84hz.
KaiseRRUby said:
Do you have more information about the OP gestures? Trying to get this to work.
Click to expand...
Click to collapse
Cannot get this to work. Using Fluid NG now.
j4dotcc said:
Thanks for the development. I am using it since 1 day and I am quite satisfied. Everything works fine (including dt2w) and the ROM seems stable so far. Battery idle drain is around 1 to 1.5 % which is okay, but I will check during the next days to get a final conclusion. Again, thanks.
Click to expand...
Click to collapse
Yes, battery is good. I was on 0,72% overnight.
@RuinWMD666 Thanks a lot for building this rom. Its clean, fast, easy to use. The clock with notifications in it is very nice, did not know that it existed.
Two minor things:
- Android Auto will cause trouble. Disable hardware overlay in developer options fixes this. This is a problem on every AOSP based ROM.
- Charging in my car is very, very slow. This is also a problem with all AOSP roms. On MIUI charging is faster. So, when i'm in my car it seems that voltage is turning down by AOSP rom.
Is there a fix for charging?
KaiseRRUby said:
Yes, i'm on 84hz.
Cannot get this to work. Using Fluid NG now.
Yes, battery is good. I was on 0,72% overnight.
@RuinWMD666 Thanks a lot for building this rom. Its clean, fast, easy to use. The clock with notifications in it is very nice, did not know that it existed.
Two minor things:
- Android Auto will cause trouble. Disable hardware overlay in developer options fixes this. This is a problem on every AOSP based ROM.
- Charging in my car is very, very slow. This is also a problem with all AOSP roms. On MIUI charging is faster. So, when i'm in my car it seems that voltage is turning down by AOSP rom.
Is there a fix for charging?
Click to expand...
Click to collapse
Wow, very thanks for the Android Auto fix, i love you!
Who are we?YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
DownloadsMi A1Flashing ProcedureInstall Latest Custom Recovery (This is recommended)
Coming from a different rom / OS you'll need to clean flash:
1. Wipe data (Factory reset)
(1.1.) If coming from stock OS you may need to format internal storage
2. Flash rom
(2.1.) After Flashing rom Flash Twrp (dont reboot without installing it)
(2.2)After Flashing Twrp go back to main menu and go to Reboot menu and select Reboot to Recovery Again
(2.2)Flash Gapps (This Recommended) For Root We Suggest Use Magisk Canay Builds (check below for download link)
3. Rejoice
For dirty flash just skip step 1, 1.1
and possibly 2.1 if your mods support addon.d (ex: Magisk)
It does not matter when you flash the firmware zip, and you only need to flash it once per firmware version
XDA:DevDB Information
Yet another AOSP project, ROM for the Mi A1
Contributors
murtaza1326
Source Code: [url]https://github.com/yaap[/URL]
Device Tree: [url]https://github.com/yaap/device_xiaomi_tissot[/URL]
Common Device Tree: [url]https://github.com/yaap/device_xiaomi_msm8953-common[/URL]
Vendor Tree: [url]https://github.com/yaap/vendor_xiaomi[/URL]
Kernel Source Code: [url]https://github.com/yaap/kernel_xiaomi_tissot[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: v10.0.24.0 (Pie) (August)
Based On: AOSP
Version Information
Status: Alpha
Created 2020-09-20
Last Updated 2020-10-06
Working:
Camera/Video/Mic
Fingerprint
GPS
IMS (VoLTE)
RIL
Video playback
Wi-Fi
NightLight
CTS
Broken:
WFD
Bubbles
Switching back to wifi after using hotspot
(need to reboot to use wifi again)
Note: The ROM Does Not Include Gapps Feel Free to flash any gapps of your likings Nik Gapps are Recommended
For Root Magisk Canary Build(Compatible with R Only) is Working Fine This Works Perfectly (Do Not Update it)
Here
Credits Section
I am not alone to bring it up to you guys alone there are many many and many people who helped me to achive this
and i would like to mention them
First I would like to thanks
@abhinavagrd_1129 even tho me and him started bringing up trees differently he was always there to guide me
& i would like to tell you that his Aosp Beta 3 Rom Inspired me to try to bringup trees
@poad42 (Our Lead Dev of Project Yaap is the one who helped me alot to fix many bugs including the lags we were facing he pointed out fix to me
@SagarMakhar he is the one who fixed my noobish mistake i made everytime (also helped me to fix ril in the previous version)
@gotenksIN a guy who also stucked with his own bringup as well i was, we disscussed about bugs and different things together
@shivatejapeddi thanks to him VNDK29 issues were solved
@Lostark13 pointing and hinting me out for diffrent smaller things
Vince Device Devs (i picked there fixes thanks alot guys )
my mates in tissot maintainer TG group
also my testers ( i uslly do my own testing but at some point they helped me to too thanks alot guys)
if i miss anyone from the list do let me know :laugh:
New Changelogs :-
Code:
Device Side:-
Enforcing Now
CTS Passes Without Root(Tissot FP No More Pixel Props)
Fixed USB Teathering
Source Side:-
Merged Latest ASB (October)patch r5
Added Q/S Customisations
Added Clocks In Styles & wallpaper app
Added DT2W & DT2Sleep Gestures
Added Brightness Slider Customization
Added Custom Footer Text Support
Old Changelogs :-
Code:
Fixed Night Light
Fixed 3rd Party Apps Not Detecting Fingerprint
Fixed Wifi & Wifi Hotspot Toogle
Fixed CTS (With Root (No More Pixel Props Needed))
Xiaomi Parts Removed Vibration Controls Completly
Xiaomi Parts (New Adaptive Icons will match other android R icons)
Source side features will be added soon
Piru?
Congratulations ??
Harvey_Spectar said:
Piru
Congratulations ??
Click to expand...
Click to collapse
tnq sar
Good to See on 11 too..
Weww.. A11 going lit ??
Pro!!!! Nice work bruh!
Gawd
Sent from my Mi A1 using Tapatalk
What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions
sergiobh said:
What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions
Click to expand...
Click to collapse
sorry for inconvenience updated info
edit: i have added links for required firmware there shouldnt be a issue to find it somewhere else
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
?
KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
it could be different sensor like fpc ? i will see and i will fix it thanks for informing about magisk
KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.
murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Hello prosur!
KaaMyA said:
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.
Click to expand...
Click to collapse
You can still check which fingerprint sensor your device have
Takeshiro04 said:
You can still check which fingerprint sensor your device have
Click to expand...
Click to collapse
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.
KaaMyA said:
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.
Click to expand...
Click to collapse
Install Device info apk and check the fingerprint sensor
murtaza1326 said:
i need more details on your sensor type if you can provide me
Click to expand...
Click to collapse
Mr Magneto said:
Install Device info apk and check the fingerprint sensor
Click to expand...
Click to collapse
I have installed "Device Info HW" app and it tells that my sensor variant is "goodix".