[Expert] [GUIDE] Install fully working Android 10 using jarlpenguin's project treble

[Expert] [GUIDE] Install fully working Android 10 using jarlpenguin's project treble - Moto G5S Guides, News, & Discussion

I recently started experimenting with Android 10 and found a fully working setup. So I'm deciding to share my current setup
#USE THIS AT YOUR OWN RISK!
I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE DUE TO A BAD ROM FILE OR ELSE!#
#BUGS: NFC isn't working on downloadable build
You tell me#
NOTE: you can also use his newer builds. BUT those aren't preconfigured. For patches that you will need see 3rd post!
Requirements: latest twrp from official source,
Oreo firmware.
This Google play services APK:
https://drive.google.com/file/d/1V8ByPJx_hOoPpQNrG0LQcXzhHpFflN-I/view
I think that's it
Step 1: Download jarlpenguin's latest treble build here:
https://github.com/MontanaDevelopme.../lineage-16.0-20190713-UNOFFICIAL-montana.zip
Install it and wait for it to go into the lineage is setup screen. Reboot to recovery (you can download a rom by just going through setup, but all installed apps will be wiped!)
Step 2: if you haven't already download a rom of choice with a build date similar to this: 201910##
These builds should work with sim-card and possibly gapps
But I recommend this rom (please extract it first, otherwise you won't be able to flash this) : https://mega.nz/#!EE11mZyC!_45oKcdNv8djsA8CEh2ZVoTDkic3BCpLfFfU9TLUhes
Step 3: wipe system and data and head to the install section
Step 4: hit "install image" in the bottom right corner and navigate to the location of the extracted .img file
Step 5: select "system image" after pressing it and swipe to flash
Step 6: wait for it to boot (this can take quite a while so, please be patient!)
Step 7: when the device is booted, immediately head into the files application and install the Google play services app from the folder you put it in.
Step 8: after a while, the "completing system update" message should disappear. But there still is one problem... As this is a ported rom (I know I didn't mention this before) this still has the "system updater" app. So, you might disable that, otherwise it flashes a incompatible rom file.
ENJOY!
###ROOT###
to root the ROM, you need phh magisk, you should easily find it on Google or a search engine of choice. THE NORMAL BUILDS DON'T WORK, phh magisk is made for Android 10 treble builds using phhussons base or patches. That's why the normal version doesn't work
If you need help, feel free to contact me on telegram! @Rush
Sneak 100 profile picture

###GCAM###
To use gcam you should flash a Magisk module called:
"Several fixes for Moto G5/G5s"
Some apks may still not work though... As I haven't figured one out which 100% works

###Alternative ROMs###
To use alternative ROMs you will need to (most of the time) use a different lineage OS version by JarlPenguin together with only the boot & vendor images listed below:
https://drive.google.com/folderview?id=1QztsGvkhURcoCp-FjI40mvUpLp5NHSpj
Also, you know that a room won't boot when TWRP crashes, so don't even try, and no, even though the lineage 17.1 alpha build does "support" project treble, it doesn't have any better compatibility with Android 10 ROMs,
The only ROMs with at least some features I could get running is really just Pixeldust X ported from the pixel 1 using erfans tools
And this also works, of you are using (again) a newer or the latest build together with patches (see boot&vendor images above):
https://sourceforge.net/projects/zj...el-Aonly-10-20191120-GSI.img-1640.7z/download
Don't forget to extract this first! /\
Note: this newer build has NO MOTO GESTURES AT ALL
Sadly, I don't think there is a fix to that

### EVOLUTION X ###
I finally found a build which is working but. Uhhhh is kind complicated to bit to it first time
Basically you follow the normal tutorial, and then replace the advertised build with the latest 202001xx build by jarl
then wait for boot
Then reboot to recovery, and wipe system and data.
Reboot (I know that nothing is installed rn)
Select recovery and boot
Flash the evolution X .IMG fine and hope for it to but crash
Sadly,
There isn't even a guaranteed boot if you do that
But it will do the job good enough
Also, you won't need the GMS services APK anymore as this has everything already updated to ****
Please DONT flash the vendor and boot image patches as these will not allow the device to boot for some godforsaken reason
Link (please extract first):
https://sourceforge.net/projects/de...lution-X_3.3_20191111_ARM64-A.img.xz/download

Related

Secondary ROM Flashing for MultiROM [TUTORIAL] [DECRYPTED ONLY] [OREO COMPATIBLE]

Introduction
Hello everyone! In the past few days, I was approached by a few people wanting to know the steps I take to successfully flash a ROM as a secondary ROM in MultiROM. Since there seems to be many people interested in trying out new ROMs while still keeping their daily-driver primary ROM untouched, I decided to make this thread for those interested. The following is a tutorial to modify a TWRP flashable ROM zip to make it compatible with MultiROM and then flashing it as a secondary ROM. Let's get straight to it then!
Compatibility
Device(s)
OnePlus 5
ROM(s)
Mostly All ROMs (in theory, at least, hence mostly)
Android Version(s)
Android Nougat 7.x.x
Android Oreo 8.x.x
Prerequisites
Basic knowledge about TWRP flashing, fastboot flashing, zip editing, MultiROM usage, etc.
A working fastboot interface on your computer
Zip-editor installed on your computer (I prefer Bandizip)
Unlocked bootloader (how-to guide here)
Unencrypted/decrypted system (how-to guide here)
Steps To Follow
Step 1: Create a new folder on desktop (or wherever you prefer) and download the following stuff in it:
The flashable ROM zip that you wish to modify to use a secondary ROM in MultiROM
update-binary.zip (attached at the end of this post)
The latest MultiROM recovery and MultiROM zip (available here)
An updated copy of the latest SuperSU (available here)
Step 2: Extract the update-binary.zip file after which you will get the modified update-binary file that we have to use
Step 3: Open the downloaded ROM zip in the zip program that you use and inside it, navigate to META-INF\com\google\android
Step 4: Delete the existing update-binary that you see there and replace it with the update-binary that you extracted in step 2
Step 5: Save the modified zip (this is now the modified ROM zip that can be flashed as a secondary ROM via MultiROM)
Step 6: Copy the modified ROM zip, the SuperSU zip and the MultiROM zip that you downloaded in step 1 to your phone's internal storage
Step 7: Reboot your phone to the bootloader mode and connect it to your computer
Step 8: Open command prompt and navigate to the folder where you've downloaded the MultiROM TWRP image file
Step 8: Run the following command to flash MultiROM TWRP to your phone's recovery partition:
Code:
fastboot flash recovery TWRP_multirom_cheeseburger_20170919-03.img
Step 10: Once the flashing is successful, reboot to the bootloader mode again using the command:
Code:
fastboot reboot-bootloader
Step 11: Press the volume down button until you see "Recovery mode" on your phone's screen and then press the power button to boot to recovery
Step 12: Once you're in the recovery mode (running MultiROM TWRP), flash the MultiROM zip first and then reboot your phone to recovery
Step 13: Once the phone has rebooted to the recovery mode, open the MultiROM menu (three parallel horizontal lines on the top right of your phone's screen) and click on the "Add ROM" option
Step 14: Select the modified ROM zip and flash it (choose the "internal memory" option if it prompts for a partition to flash the secondary ROM in)
Step 15: Once done, hit back to open the MultiROM menu, then click on the "List ROMs" option and select the ROM that you just installed
Step 16: Once you select the ROM that you just installed, select the "Install Zip" option and flash the SuperSU zip
Step 17: Once the SuperSU zip is flashed, reboot your phone to system and you will notice a new selection menu is now displayed before the phone boots into the system
Step 18: Select the new ROM that you just flashed as the secondary ROM to boot to it
Step 19: The phone will bootloop a couple of times - DON'T WORRY, THIS IS NORMAL AFTER FLASHING SUPERSU - and in between the reboots if you see the ROM selection menu appear again, just select the newly flashed ROM and let it continue
Step 20: It should boot into your secondary ROM after a couple of bootloops/reboots!
Disclaimers
You are doing this at your own risk. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you are unsure of how to go about something. Also, please don't forget to make a full nandroid backup via TWRP in case anything goes wrong.
The above method works for me 99% of the time, but there are a few ROMs that I wasn't able to boot as secondary no matter what I tried. If a ROM doesn't boot as secondary for you using the tutorial above, I'll try my best to help you, but I may or may not succeed.
I haven't tried the above method with Magisk instead of SuperSU. If you wish to try, feel free to do so at your own risk.
Flashing of the secondary ROM will most probably corrupt your primary ROM's password/pin (if you have one setup). If you can't get into your primary ROM after flashing the secondary ROM using your password/pin, flash this zip in TWRP which will remove your lockscreen security settings (but won't touch your fingerprints, if you have any setup).
Thanks To
@martinusbe for adapting MultiROM (recovery, installer zip, manager application, uninstallation zip) to OnePlus 5
@Chainfire for SUperSU and all the work he's ever done for the community
All of you guys for viewing this thread
Changelog
December 26, 2017 - Initial post
OP Update Information
Created: December 26, 2017
Last Updated: December 26, 2017

@shadowstep This will be very useful to many people. Merry Christmas to you

SlyUK said:
@shadowstep This will be very useful to many people. Merry Christmas to you
Click to expand...
Click to collapse
Thanks! I hope so too. Merry Christmas to you too!
P.S. - I tried the above method with Liquid Remix 8.0 and Dirty Unicorns 12.0, worked fine for me.

shadowstep said:
Thanks! I hope so too. Merry Christmas to you too!
P.S. - I tried the above method with Liquid Remix 8.0 and Dirty Unicorns 12.0, worked fine for me.
Click to expand...
Click to collapse
Nice... speaking of Dirty Unicorns. Here is an update today.

SlyUK said:
Nice... speaking of Dirty Unicorns. Here is an update today.
Click to expand...
Click to collapse
Yes, I follow them on Google+. Read the announcement sometime back. I compile my personal, unofficials builds of DU 12, so have already gotten a sneak peek.

shadowstep said:
Yes, I follow them on Google+. Read the announcement sometime back. I compile my personal, unofficials builds of DU 12, so have already gotten a sneak peek.
Click to expand...
Click to collapse
Oh well thats fantastic. DU Oreo should be amazing once unleashed, i'm sure.

Thanks, but can I have official Oreo in primary rom and an other rom in secondary?

Garfanki said:
Thanks, but can I have official Oreo in primary rom and an other rom in secondary?
Click to expand...
Click to collapse
Should work, yes. I tested the steps with a Nougat primary ROM and an Oreo secondary ROM; worked fine. So the setup you're looking for should also work. Give it a shot!

Ok thanks, I will try!
shadowstep said:
Should work, yes. I tested the steps with a Nougat primary ROM and an Oreo secondary ROM; worked fine. So the setup you're looking for should also work. Give it a shot!
Click to expand...
Click to collapse

can i use magisk instead of supersu ?

kimikim0 said:
can i use magisk instead of supersu ?
Click to expand...
Click to collapse
Already mentioned this in the OP (Point 3 under Disclaimers). I haven't tested the method with Magisk in place of SuperSU.
This is because when I was initially trying to figure all this out, most of the stuff that I was going through pointed out that Magisk wasn't doing too well with the secondary ROM and hence I just chose SuperSU; didn't even bother testing Magisk when SuperSU worked fine.
If you wish to test, go for it. Should do no harm.

kimikim0 said:
can i use magisk instead of supersu ?
Click to expand...
Click to collapse
iirc magisk scripts won't run on secondary rom installation ( twrp multirom or dual boot patcher ) will give you errors and nothing will happen
Sent from my OnePlus 5 using XDA Labs

primary system can't boot when i flash multirom zip file into oos oreo as primary,and for other 8.0 roms as primary,secondary 8.0 roms boot with primary system,same like dual boot patcher,only work with gzosp based 8.0 roms as secondary

billsz said:
primary system can't boot when i flash multirom zip file into oos oreo as primary,and for other 8.0 roms as primary,secondary 8.0 roms boot with primary system,same like dual boot patcher,only work with gzosp based 8.0 roms as secondary
Click to expand...
Click to collapse
I haven't tested the method with OOS 5.0 Oreo as my primary ROM. When I last tested, I was running a custom Nougat based ROM (AOSiP) and with that I tested multiple Oreo based custom ROMs (after modifying them, of course, as mentioned in the tutorial) as secondary ROMs and they all worked fine. Not to mention, of course, that if you don't modify the ROM zip files with the updater-binary file I attached in the OP, then it just won't work.

I would like to have os stable Oreo as primary ROM and other Oreo build as secondary ROM, but the installation of secondary rom fails... Why? Is not possibile have 2 ROMS with Oreo?

Any help?

Garfanki said:
Any help?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=74636311&postcount=702
Actually, after Oos Oreo 8.0 upgrade, primary via MultiROM.zip won't boot anymore; there were 2 evolutions since OP5 'old' multirom:
1-Magisk support for 2nd roms
2-Encryption support for 2nd roms WITH rebranded data/media/0/multirom directories
I tried rebuilding both : 1) doesn't boot (like 'old'), and 2) boots primary via latest Multirom, BUT 2nd always reboot to recovery, despite working installation files (Magisk/sparse img or not) and decrypted device.
Also, OP5 adbd never worked for MultiROM neither log. So waiting for a skilled (new un-/encryption Oreo status) dev to follow AdrianDC sd820 latest MultiROM : https://github.com/XperiaMultiROM/android_device_sony_dora/tree/master/multirom , considering that there is no working MultiROM for any sd835 yet...
(Kexec-ed kernel would even be better...)
Most powerful is EFIdroid due to our new bootloader edk2, but here: dev/bricks are unrecoverable...
The 'funky' thing is that I got intermediate 1) working 100%, for antic p880 device with Magisk/sparseImg support ok for 2nd roms.

Thank you, so I must wait... Happy New Year!
oF2pks said:
https://forum.xda-developers.com/showpost.php?p=74636311&postcount=702
Actually, after Oos Oreo 8.0 upgrade, primary via MultiROM.zip won't boot anymore; there were 2 evolutions since OP5 'old' multirom:
1-Magisk support for 2nd roms
2-Encryption support for 2nd roms WITH rebranded data/media/0/multirom directories
I tried rebuilding both : 1) doesn't boot (like 'old'), and 2) boots primary via latest Multirom, BUT 2nd always reboot to recovery, despite working installation files (Magisk/sparse img or not) and decrypted device.
Also, OP5 adbd never worked for MultiROM neither log. So waiting for a skilled (new un-/encryption Oreo status) dev to follow AdrianDC sd820 latest MultiROM : https://github.com/XperiaMultiROM/android_device_sony_dora/tree/master/multirom , considering that there is no working MultiROM for any sd835 yet...
(Kexec-ed kernel would even be better...)
Most powerful is EFIdroid due to our new bootloader edk2, but here: dev/bricks are unrecoverable...
The 'funky' thing is that I got intermediate 1) working 100%, for antic p880 device with Magisk/sparseImg support ok for 2nd roms.
Click to expand...
Click to collapse

Good evening, I try to flash flyme rom (downloaded by chinese forum) as secondary rom but the installation fail... Any idea?
Error 7

Can I flash xXx rom as secondary? or does it only work with lineage os based roms?

[OOS][Stable][OP6T Global][OP6T Tmobile] Oneplus 6T stable OOS guide thread

OOS stable for Oneplus 6T Global
This thread is an attempt to make things clean for OP6T users.
It will contain latest zip links for OOS stable.
It will contain a brief guide on how to root, install TWRP , how to update with or without those elements.
6T global edition is supported by thread readers and me, and T Mobile converted specific concerns will be handled by community under the supervision of @Scott, thanks to him for the help.
It will not contain basics like ADB and Fastboot connection with a computer. Experiment, read, there are many and many tutorials on the internet for that. Don’t forget there is a world outside XDA and that you can perform a search on any search engine to grab information.
It will not cover by decision the ‘patching boot.img’ method for gaining root. It’s not necessary to use it when we have a working TWRP and Fastboot. If you want to try it search on the internet about ‘extracting boot.img from payload.bin’ and then use Magisk Manager to patch it.
Please NO discussion about: Magisk itself, custom kernels, debloating (whatever method you want to use), custom ROMS… Only STOCK STABLE OOS.
If you just want to flash custom kernels, no need to have TWRP, Ex Kernel Manager and Franco Kernel Manager for example can take care of that (see Play Store to grab those apps), and backup your stock kernel.
ALWAYS USE LATEST VERSIONS of the different tools used. Don’t ask for help if you’re using 6 months old TWRP or Magisk. Update it first.
First a bit of what I have understood about our phone, and its main specificity, i.e A/B slots.
A/B slots, what else ?
This structure is meant to enable to have two different versions of the SAME ROM, one slot will contain the previous version of the ROM, the other slot will contain the updated one. If you are on slot A and running 10.3.0, the update process will lead to have 10.3.0 on slot A and 10.3.1 on slot B. On next boot the bootloader will automatically boot updated one (i.e slot B will be flagged as the active one). In case of issues during boot process the bootloader will switch the active slot back to the ‘old’ version(here slot A) that was booting fine.
This means that IT’S NOT a dual boot feature!! If you want to run a custom ROM it’s better to have the same custom ROM on both slots and not a mix of OOS and custom ROM. But that’s already OT so let’s stay focus, each custom ROM should provide clear instructions about that.
Having a slot phone means that there is no Recovery partition. So if you ‘fastboot flash boot twrp.img’ it will overwrite your boot partition and thus the ROM kernel and can lead to issues. The .img file is only meant to be temporarly booted. Recovery (stock or TWRP) is a part of the boot ramdisk.
Some simple facts about slots and flashing in TWRP:
Flashing a whole ROM (OOS for example) will automatically flash it to the currently inactive slot and switch it to be the active one (that works also with stock recovery, when performing a ‘local update’)
Flashing a ROM overwrites completely the boot partition (in recent Android versions, flashing process is using partition RAW images and not files like it was before): that means that TWRP and Magisk (if present) will be ERASED.
Flashing TWRP installer will flash it AUTOMATICALLY ON BOTH SLOTS (and will erase Magisk if present)
Magisk (and GAPPS but it only applies to custom ROMs), when flashed with TWRP is only flashed in ACTIVE slot. That’s why you must REBOOT to recovery BEFORE flashing Magisk to have it installed on the active updated slot. And that explains why you must flash it last.
That said, if you stay on OOS, YOU DON’T care about slots, just remember those basics to understand why you have to respect some steps, and let the recovery take care of slots. Messing manually with them results often in soft bricks
Downloads
OOS stable full signed zips: thanks to @Some_Random_Username, @Titokhan, @trollavin (their thread here)
If the above doesn’t work anymore just let me know I’ll find something else.
FYI you can still go to Oneplus website but they take time to update it to latest version… And there is no archives.
XDA:DevDB Information
OOS Stable thread support, ROM for the OnePlus 6T
Contributors
Striatum_bdr, Scott
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2020-02-05
Last Updated 2020-02-06

Rooting
CHANGELOGS
OOS 10.3.4:
System
Updated launcher version to 4.1.6
Updated Android Security Patch to 2020.05
Improved system stability and fixed general bugs
Phone
Fixed the issue with default country in assisted dialing when SIM2 is in roaming state
Newly added Work-Life Balance to help prioritize notifications and allocate time wisely (India only)
Newly added Epic Games in Game Space (India only)
OOS 10.3.3:
System
Fixed the issue with a black screen randomly appearing while playing games
Updated GMS package to 2020.02
Updated Android Security Patch to 2020.04
Improved system stability and fixed general bugs
Network updates
Integrated VoLTE & VoWifi support for Telenor – Denmark
Integrated VoWifi support for RJIO – India
Phone
Newly added OpSoprts features in the shelf
Added OnePlus Roaming feature: choose a plan without worrying about the SIM card while traveling
Cloud Sync updates [India only]
Updated the CloudService to Version 2.0
OOS 10.3.2:
Changelog 10.3.2
System
• Fixed the screen flickering issue while swiping up to unlock
• Improved system stability and fixed general bugs
• Updated Android security patch to 2020.02
OOS 10.3.1:
Changelog 10.3.1
System
Fixed the issue with a black screen appearing after unlocking the device using fingerprint
Fixed the issue with the animation logo while rebooting the device
Fixed the issue with device heating up while charging
Fixed the random disconnection issue with 5Ghz Hotspot
Improved system stability and fixed general bugs
Updated Android security patch to 2019.12
Camera
Optimized the image preview time in the Pro mode
Fixed the camera crash issue
Gallery
Fixed the issue with videos and images not displaying in Gallery
OOS 10.3.0:
Changelog 10.3.0
System
Updated system to Android 10
Brand new UI for Android 10
Fixed the automatic reboot issue
Added the notch area display option in the Settings (Settings - Display - Notch display - Hide the notch area)
Fixed the issue with lock screen appearing even after unlocking the device with the password
Fixed the issue with Navigation bar after upgrade
Fixed the Digital wellbeing option missing in the settings
Updated Android security patch to 2019.11
Fingerprint
Fingerprint unlock functionality improvement
Enhanced the fingerprint animation
Camera
Camera performance improvement
Wifi Connectivity
Fixed the issue of Wifi connection to 5Ghz networks
OOS 10.0.1:
Changelog 10.0.1
System
Updated system to Android 10
Brand new UI for Android 10
Updated Android security patch to 2019.10
Fixed the fingerprint identification issue
Fixed the animation lag for fingerprint unlock
Fixed the automatic reboot issue after upgrade
Camera
Improved the performance and fixed known issues
Wifi Connectivity
Fixed the 5Ghz WiFi connection
OOS 10.0.0:
Changelog 10.0.0
System
Upgraded to Android 10
Brand new UI design
Enhanced location permissions for privacy
New customization feature in Settings allowing you to choose icon shapes to be displayed in the Quick Settings
General bug fixes and improvements
Full Screen Gestures
Added inward swipes from the left or right edge of the screen to go back
Added a bottom navigation bar to allow switching left or right for recent apps
Game Space
New Game Space feature now joins all your favorite games in one place for easier access and better gaming experience
Contextual Display
Intelligent info based on specific times, locations and events for Ambient Display (Settings - Display - Ambient Display - Contextual Display)
Message
Now possible to block spam by keywords for Message (Messages - Spam - Settings - Blocking settings)

ROOTING (+/- TWRP)
Magisk zip is to be found here
TWRP latest .img and installer are to be found here
Don’t use all-in-one tools, you’re a grown up person you can to it by yourself. Yes you can.
If you're not rooted and run an OOS version older than 10.3.1, update your phone normally to latest OOS stable version then do as below
If you’re not rooted and running 10.3.1 or higher, those are the simplest steps to gain root.
Unlock your bootloader (will wipe everything…): “fastboot oem unlock” from a computer (see beginning of OP to know why I don’t detail this) with phone in fastboot mode
Grab latest Magisk zip on your phone and latest TWRP .img on your computer (AND TWRP installer .zip on your phone if you want to install TWRP permanently). Boot in fastboot mode your phone.
Then :
“fastboot boot twrp_latest.img” (adapt to the name and path of your twrp file)
within TWRP, flash TWRP installer .zip if you want to keep TWRP
flash Magisk zip (always AFTER flashing TWRP)
Reboot
(you can theoretically use the TWRP feature ‘install recovery ramdisk’ to avoid flashing twrp installer but never tested)
Note: please STOP using blue_spark TWRP!!! Support for OP6T has been stopped long time ago, only OP6 twrp is still actively supported by eng.stk (errors are mandatory if you flash it on 6t). I even see people that use a 3.2.x version of blue_spark...

UPDATING WITHOUT ROOT
If your bootloader is locked (meaning no root no TWRP, factory state), the update process is trivial, OOS (or Oxygen Updater if you use it) will grab a patch file (around 100MB max usually) and will apply it and will ask you to reboot. Everybody should be able to do this as it’s the normal way every phone on earth updates itself… If major changes are present sometimes you’ll have the whole ROM file. It doesn’t matter anyway it leads to the same destination.
If your bootloader is unlocked but without root, the only difference is that OOS (or Oxygen Updater) will download the WHOLE ROM (around 1.8GB) and will apply it then ask for rebooting
UPDATING WITH ROOT (+/- TWRP)
Whole ROM update is mandatory. You can wait for System Update to download it or grab manually the zip file or use Oxygen updater. You then go in Settings > System > System Update > clic on the upper right cogwheel then choose ‘Local Update’ and select the zip file (If you download the OTA .zip file manually you must place it in the root of user data, like /data/media/0/ i.e the user internal storage, or eventually in the .OTA folder if there's one. If you use Oxygen Updater or System automatic donwload it will be right placed).
The following update method is the preferred one (even if you have TWRP, recommended by some TWRP devs) due to frequent changes in partitions by OnePlus
apply the ROM update via Settings > System > System Update > Local Update
DON’T REBOOT
Open Magisk Manager
[If you have TWRP, go in Modules menu, clic on ‘+’ and choose latest TWRP installer zip file on your phone. Don’t use Retention A/B Script Magisk Module I had issues with it] [then stay in Magisk Manager and do the next step]
On main screen of the app clic on ‘install’ next to Magisk paragraph
On the pop up menu confirm ’Install’
On the next pop up menu clic on the last entry: install on inactive slot (after OTA update)
Then only reboot.
The order can be changed (the most important thing to preserve is Magisk, TWRP is easy to flash back):
Update without taking care of TWRP, just Magisk part ("install to other slot after OTA thing")
Once rebooted to updated system, flash TWRP as a module with Magisk Manager
Install Magisk again using Magisk Manager ("direct install" option)
There are infinite debates about uninstalling or not Magisk Modules before updating. Most of the times nothing to touch, sometimes there could be issues, instead of uninstalling perhaps just inactivate them by precaution before updating.
Note: If you are rooted and run an OOS version older than 10.3.1, the above method should work, but you can also update your ROM to latest stable without taking care of root/TWRP and then root again as described in post #2
If you want to try TWRP way:
Reboot to TWRP
Flash OOS update
Flash TWRP installer
Reboot to Recovery
Flash Magisk
Reboot System
IF YOU ARE INTO A SOFT BRICK
Don't forget the Vol+/Vol-/Power_button combo that can save you from a non responding phone...
If you can boot in fastboot mode, flash the stock ROM with fastboot. A little trick is to edit the flash-all-partitions**.bat and remove ‘-w’ (-w means that the partition will be wiped before flashing) from the script, it will prevent personal data wipe. Or flash manually all partitions one by one, without ‘-w’ flag evidently. Some partitions can’t be flashed with fastboot, for that once booted back to OOS, download and install by ‘local update’ method the same ROM version you’ve just restored with fastboot (see the linked thread to know why, emojis issues for example sometimes).
If you can’t go in fastboot mode, use Oneplus MSM tool. See there and there.

Thank you for the time and effort for this thread as I just came from a Sony XZ1 as I was a bit confused by the different posting on how to do what...

Thanks for a detailed post.
Can I update my rooted OP6T 9.0.17 (TWRP 3.3.1-2+ Magisk) directly to rooted 10.3.1 using the following guide :-
1. Reboot to Twrp 3.3.1-2.
2. Flash Twrp 3.3.1-31 installer.
3. Rebbot to recovery twrp 3.3.1-31.
4. Flash Magisk uninstaller
5. Flash 10.3.1 OS
6. Flash TWRP 3.3.1-31 installer
7. Reboot to recovery.
8. Flash Magisk.
9. Reboot to system.

Goormeetsingh said:
Thanks for a detailed post.
Can I update my rooted OP6T 9.0.17 (TWRP 3.3.1-2+ Magisk) directly to rooted 10.3.1 using the following guide :-
1. Reboot to Twrp 3.3.1-2.
2. Flash Twrp 3.3.1-31 installer.
3. Rebbot to recovery twrp 3.3.1-31.
4. Flash Magisk uninstaller
5. Flash 10.3.1 OS
6. Flash TWRP 3.3.1-31 installer
7. Reboot to recovery.
8. Flash Magisk.
9. Reboot to system.
Click to expand...
Click to collapse
That sounds correct

Thank you for taking the time to do this. I am now subscribed

Very nice. Subscribed. Thank you.

I've been trying to do this for the past 8 hours.
Here's what I do, please tell me where am I going wrong
- msm 9.13
- update to 9.17
- local upgrade to 10.3.1
- boot system to enable oem unlock, usb debug
- boot to fb, unlock bootloader
- boot system
- boot fb, boot twrp
- flash twrp, both slots
- reboot twrp
here I get different results:
- try to install magisk, all internal storage encrypted. sideload, but still no cigar. try to install on both slots by rebooting twrp to a and b and sideloading magisk, still no cigar
OR
- flash magisk, boot system, no magisk
OR
System boots, we have root, we have everything, but file manager shows emptyness. Can't modify any files on internal storage. Via phone and via PC.
Now tell me what am I doing wrong, please

jazzgott said:
I've been trying to do this for the past 8 hours.
Here's what I do, please tell me where am I going wrong
- msm 9.13
- update to 9.17
- local upgrade to 10.3.1
- boot system to enable oem unlock, usb debug
- boot to fb, unlock bootloader
- boot system
- boot fb, boot twrp
- flash twrp, both slots
- reboot twrp
here I get different results:
- try to install magisk, all internal storage encrypted. sideload, but still no cigar. try to install on both slots by rebooting twrp to a and b and sideloading magisk, still no cigar
OR
- flash magisk, boot system, no magisk
OR
System boots, we have root, we have everything, but file manager shows emptyness. Can't modify any files on internal storage. Via phone and via PC.
Now tell me what am I doing wrong, please
Click to expand...
Click to collapse
I think you should format data after unlock. I think it's kinda safety feature if some1 try to get into your storage by unlock bootloader. But wait by some1 to confirm

jazzgott said:
I've been trying to do this for the past 8 hours.
Here's what I do, please tell me where am I going wrong
- msm 9.13
- update to 9.17
- local upgrade to 10.3.1
- boot system to enable oem unlock, usb debug
- boot to fb, unlock bootloader
- boot system
- boot fb, boot twrp
- flash twrp, both slots
- reboot twrp
here I get different results:
- try to install magisk, all internal storage encrypted. sideload, but still no cigar. try to install on both slots by rebooting twrp to a and b and sideloading magisk, still no cigar
OR
- flash magisk, boot system, no magisk
OR
System boots, we have root, we have everything, but file manager shows emptyness. Can't modify any files on internal storage. Via phone and via PC.
Now tell me what am I doing wrong, please
Click to expand...
Click to collapse
I know you managed to sort things as you posted it in another thread. Anyway I don't understand why you had to do all those steps .... But anyway the goal is achieved

Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.

Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
THANK YOU VERY MUCH. Several of us out here!

Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
Welcome back sir Scott!
---------- Post added at 03:27 AM ---------- Previous post was at 03:26 AM ----------
Thank you for this thread.

Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
hodgestl said:
THANK YOU VERY MUCH. Several of us out here!
Click to expand...
Click to collapse
I second this, thank you and also thanks to OP!!
Is there any way we could get a change log for the stable update?

hodgestl said:
THANK YOU VERY MUCH. Several of us out here!
Click to expand...
Click to collapse
r3dp0is0n2012 said:
Welcome back sir Scott!
---------- Post added at 03:27 AM ---------- Previous post was at 03:26 AM ----------
Thank you for this thread.
Click to expand...
Click to collapse
..Cory.. said:
I second this, thank you and also thanks to OP!!
Is there any way we could get a change log for the stable update?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Your all welcome!
I love this phone and like to help so lets see how this goes down :good:
...
---------- Post added at 10:48 PM ---------- Previous post was at 10:39 PM ----------
As far as the change log, that could be a challenge. I have never been able to find the full change log for the international version. The T-Mobile Version is here: https://www.t-mobile.com/support/devices/android/oneplus-6t/software-updates-oneplus-6t. Because this is something we can direct link to, I dont think it should be included in full text here on XDA. I think a link the in first or second post under "useful info" would be sufficient.
As far as the international version goes, I know every verison number by heart.. worst case scenario, I could just google each OTA version and grab the change log from the from the first Android news site that pops up. Unless someone else knows of where one might be at? We could also start at version 10.0.0 because I feel anything older than that is irrelevant.

For changelogs it could be done eventually by grabbing them on the net. There is clearly something between Oneplus and changelogs....
I'm ask for an extra reserved post to have more space and avoid too long posts.

Changelogs added in post #4

Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
Awesome. I've been running a converted TMobile phone and can't wait b for them to related A10 so I can have android pay back without root

[GUIDE] Install Oxygen OS on Moto G5s Montana

Information: this has been moved into the roms/kernels/recoveries section of the moto G5s, please look for updates there!
UPDATE!
SEE LATEST POST BELOW!
Changelog
-Fixed Reboot/shutdown not working
thanks to @erfanoabdi for creating the fix
and the @G5Treble group on Telegram for providing a link!
This is powered by builds from @JarlPenguin
this time, i will try my best making this friendly to people who arent very experienced with android modding,
STEP 1: Prerequisites
Oreo Firmware. if you dont have it installed, see how to here install it here (im not sure but i think updating using your stock rom to oreo should also be enough):
forum.xda-developers.com/moto-g5s/development/rom-android-8-1-0-oreo-stock-firmware-t3845501
TWRP Treble:
[url]https://twrp.me/motorola/motorolamotog5s.html[/URL]
And a Google Play Services Fix:
https://www.apkmirror.com/apk/googl...s_slug":["nodpi"],"minapi_slug":"minapi-28"}/
Dont get overwhelmed by the amount of .APK files! just download the latest non beta version!
thats it
STEP 2: Downloading
to use Oxygen OS, we will need to use project treble, if you dont know what that means, thats no problem, its not important to
The Lineage OS build is located Here: [url]https://github.com/MontanaDevelopment/releases/releases/download/LOS16M-1/lineage-16.0-20190713-UNOFFICIAL-montana.zip[/URL]
You will need this to use project treble, which we need for Oxygen OS
Now the Oxygen OS Gsi: [url]https://master.dl.sourceforge.net/project/vegabot3gsi/OxygenOS%209%20GSI%2024-02-2020%2005-30%20UTC%20hseoZxQi/OxygenOS-Aonly-9-20200224-ErfanGSI.img.gz[/URL]
Make Sure to extract this first!
after that we get to installing
Step 3: Installing Everything
Install the lineage OS build like any rom. just make sure to not install Gapps. and turn off automatic reboot
so again DONT REBOOT TO LINEAGE
AND DONT WIPE /SYSTEM OR ELSE
navigate to the folder, in which you extracted the previously mentioned Oxygen OS build
(this should be a .img file)
you will probably not see the file. thats normal. press "install IMG file" in the bottom right corner first, you will then see the .img file
(unless you didnt extract it first)
press on it and select system, now just swipe to install the image file
Wait...............and BOOM
just reboot and you should see the oxygen OS boot animation,
first boot will take a while. and the screen WONT turn a bit darker like it usually does. please just wait.
after booting, unlock the device. and search for the apk you downloaded, install the apk and DONT exit the installer.
If googles services are updated, you can now enjoy your device with Oxygen OS Pie!
PLEASE READ THE ISSUES BELOW!!!

ROOT
Rooting is easy as pie (Pun Not indended)
On Oxygen OS
Just Install magisk 20.4 and done
No Special Versions needed

ISSUES
The only ones i know of are a little Buggy Launcher and "reading mode" aka monochrome aka no colour mode isn't working

DARK MODE
No one would notice when I put this into the issues section.
So here it is
Dark mode doesn't get activated within apps due to a setting not being"linked" with the themes setting.
To activate dark mode:
Turn on developer settings and go into the developer settings menu
In the developer settings, s search for "night mode" and set it to always on.
Done! Apps will n now adapt to dark mode

Nice guide. Thanks for posting.

Updates coming soon!
"Patch notes"
-Started searching for newer GSI builds
-Fixed Reboot issues thanks to @erfanoabdi and the @G5Treble group on Telegram!
Install Oxygen OS using The guide first. If you did that follow these steps:
Method 1: Using the flashable zip file
https://drive.google.com/file/d/1-9WenzRyW7k0njPdVssA1RMPMdMy-9RS/view?usp=drivesdk
Download and flash trough twrp (press and hold volume down + power button until you get to bootloader menu)
If that doesn't work
Method 2: Manual Install
For this, download the .zip file and extract it.
Then put the "Vold" file into
System/bin
And then Chmod 777 (everyone can access the file) using root or twrp.
If using method 2 doesn't work, and you can't use file managers anymore, YOU DIDNT CHMOD 777 THE VOLD FILE!

Screenshots:

TWEAKS
No, we arent talking jailbreaking we are talking nice little things you can do
for example,
Setting the dpi 1 dp higher than default (from 420 to 421) gives you an extra Row in the quick settings panel
J-oneplus tools might also be useful to you
and no, quickswitch (for getting other launchers to work with the recent apps panel) doesnt work
there are still a lot of things to do though!

[ROM][OFFICIAL][fajita][11.0]crDroid Android[v7.30]

NOTICE: crDroid 7.x (Android 11) is now in maintenance-only release mode, and will probably be End-Of-Life'd soon.
I'll be merging monthly Android Security Bulletins from upstream as they're available, and pushing releases, but they're blind builds at this point and I don't have time to troubleshoot them any longer.
Please consider updating to crDroid 9.x (Android 13):
crDroid 9.x XDA thread - OP 6/6T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is built on top of LineageOS, and is designed to increase performance and reliability over stock Android for your device, while also attempting to bring you many of the best features in existence today.
Features
A quick glossary and primer on flashing & slots for A/B devices (like ours):
Spoiler: Show/Hide
- "Clean flash": Removing device protection & clearing user settings before installing a bootable system install zip (usually by either wiping or formatting data, see below).
- "Dirty flash": Flashing a ROM zip (usually upgrading to new version, sometimes just re-flashing the existing one) without wiping data or anything first.
- "Wipe data": Synonymous with "factory reset", accomplished from TWRP recovery by selecting "Wipe", then performing the "Slide to factory reset". Clears user data without erasing any partitions, removing encryption, or deleting contents of internal storage.
- "Format data": Formats the data partition itself, resets all file-based encryption keys, loses all contents of internal storage, and in fact deletes all "user 0" directories (this has some implications for internal storage before & after first boot).
- "User 0" directories are a series of directories that store userdata for the primary user, "Owner", and get created in various places throughout the filesystem on first system boot if they don't exist already. Anything you copy to "internal storage" while booted in recovery after "formatting data" will actually be copied to /data/media/ instead of /data/media/0/, and will become invisible to regular file browsing after first boot once the system has created /data/media/0, since the system will prefer to use that path for internal storage from then on (so you'll need a root file browser to delete things from /data/media, or just ADB sideload things instead of copying after formatting but before booting).
- "OTA package": Originally an abbreviation for "over the air", referring to how a software update could be delivered (as opposed to having to take your phone to a carrier's store for a firmware update via serial/USB connection). The common usage in Android circles is any installation zip file that actually includes a bootable system.
- Some partitions are duplicated (system, vendor, boot, and probably a couple others, but not data) and have a "slot A" & "slot B" copy.
- "Slot A" and "slot B" are absolute designations, but most installer zip scripts use the relative designations: "active" and "inactive". Whichever slot you're booted from currently is "active", and the other one is "inactive".
- Installing a zip file that's flagged as being an OTA package will 1) install the contents to the "inactive" slot, and then 2) flag the bootloader to switch which slot is considered "active" (and booted from) and "inactive" upon next reboot.
- The OxygenOS full OTA zip files and all custom ROM installer zip files are considered "OTA packages" and will trigger a slot switch on next boot after installation.
- You can install multiple OTA zip packages one after the other without rebooting in both the stock recovery and TWRP; they will all get installed into the correct partitions in the "inactive" slot, one on top of the other, and then it will swap active & inactive upon reboot.
- We don't use what are called "delta" updates, which can patch existing partitions by block or by file; we use full filesystem images. So for us, OTA zip packages are really just a bunch of partition filesystem image files all wrapped up into a "payload.bin" with some extra instructions & metadata/checksums, so when you flash a ROM, it overwrites entire partitions at a time instead of individual files or filesystem blocks within that partition. So if you've changed something in a partition like system that gets written as part of flashing an OTA zip, all your changes are gone. The only thing in the system partition afterward will be what was in the system.img that was included in the ROM zip payload.
- The partitions that crDroid, LineageOS, and most custom ROMs for OnePlus 6 & 6T install to when flashing are boot (contains recovery & kernel), dtbo, system, and vbmeta. Some ROMs (like Syberia) build the vendor partition from source instead of just trying to work with the existing OEM vendor partition, so they flash that one too when installing. So you definitely need to flash stock vendor before switching from Syberia or another source-built vendor ROM to one like Lineage or crDroid that uses prebuilt.
- "Prebuilt vendor" vs. "source-built" vendor partitions: when first trying to get a custom ROM working on a new device now that we have separate system & vendor partitions & Google's "Project Treble" is a thing, you'll often just leave the contents of the vendor partition alone, because that's where all the proprietary or device-specific stuff lives (manufacturer specific hardware drivers & interfaces, any DRM libraries, custom frameworks & selinux policies for talking to them), and you make a compatibility map of what framework versions you're compiling against in system and what vendor version they're compatible with or supersede or you overlay updated things that should replace stuff in the vendor partition and keep it in system_ext instead. But you're also limited in that if there are some things in vendor, you CAN'T work around it from the ROM side (like, OnePlus Camera working correctly). So often, once the basics are functioning, the goal is to move to building the contents of the vendor partition from source, because you then have the freedom to fix problems with sepolicy, library/framework mismatches, etc. and make things work with the custom ROM instead of only working with the OEM's flavor of Android, and you can still copy individual pre-compiled files from the stock vendor filesystem image if needed (like if there's no open-source equivalent for some driver). Unfortunately, OnePlus SDM845 (enchilada & fajita, the OP6 & OP6T) never got a proper source-built vendor bringup by the LineageOS team (upon which crDroid is based). And while Syberia has had source built vendor in Android 11 (possibly 10?), it was only done for enchilada and NOT fajita, it's not trivial to unroll & commonize what they've done to apply to other ROMs, and some of the proprietary files they keep are imported from other similar devices/similar chipsets rather than source-built (presumably because the OnePlus ones are modified in a weird way that the open-source components can't hook into, but still not ideal). So for fixing a lot of the issues we still face with lack of things working quite right, or hardware features not available in custom ROMs (especially compared to newer OnePlus devices like the 7, 8, or 9 series), we're kinda stuck, because you can't just implement it against the stock prebuilt vendor.
- "Updating firmware" simply means we're flashing updated contents from the manufacturer into all the OTHER partitions besides the ones that the ROM OTA zip touches. There are another dozen or more of those, besides system & boot, that the full OxygenOS OTA zip would normally write to when you install it. The contents of the system partition in custom ROMs for our device are generally built against a particular version of OxygenOS (mostly the contents of the OEM vendor partition), and we've recently had an entire major Android version update come through from OxygenOS. Some people are still on older firmware that is now dramatically different than what the current custom ROM was intended to deal with (that is, all the stuff from OxygenOS is still based on Android 10, while the ROM is expecting compatibility with Android 11), and while I tend to agree that OxygenOS 10 was better than the current state of OOS 11, that doesn't matter when you're talking about installing the custom ROM over it. So please, keep an eye out in the release notes for what the recommended/required firmware versions are, and remember to update (procedure below).
Notes on custom recoveries with OxygenOS 11 firmware:
Spoiler: Show/Hide
- My understanding (from people smarter than me) is that the android-11 tree of TWRP is kind of a mess at the moment. I had made some 3.6.0_11-0 unofficial builds for both enchilada & fajita, but now they don't even seem to boot and I don't know why. TWRP android-11 tree refuses to mount the system partition where it belongs, and so addon.d OTA survival scripts don't work correctly any longer (which means you're hosed if you use NikGapps and update while booted from a TWRP version ending in "11-0", or if you have Gapps installed as a module and forget to reboot recovery & re-flash Magisk after flashing an update from TWRP).
- Trying to `fastboot boot` an Android 9-based TWRP image (like official 3.5.2_9-0 twrp.img) after installing OxygenOS 11 doesn't work, and will drop you into Qualcomm Crash Dump mode. Don't try to flash it as your boot partion, either.
- Meanwhile, stock LineageOS-based recovery, for all its shortcomings, has working fastbootd (aka "Userspace fastboot", which is what happens when you go to "Advanced", then choose "Enter fastboot" and the background colors go from purple to orange) that lets you flash both slots at once and unlocks critical partitions, while the OnePlus OEM bootloader (where it says "Fastboot Mode" in a square, then goes to the big green "START" text over white & dark red terminal font type text) can't be used to flash every partition to update firmware. Personally, I still think of it as wannabe-class and not a "real" custom recovery until the Lineage team 1) implements userdata decryption so you can manage files in /data and install updates from internal storage, and 2) allows for a factory reset the way we've always all understood it ("wipe data") WITHOUT nuking the contents of internal storage for no good reason ("formatting data"). But since crDroid is LineageOS-based, it's what we've got, and fastbootd is the best way to update firmware.
- With all that being said, since it's likely TWRP will only get MORE broken with Android 12 looming large, we're officially only going to support the built-in LineageOS-based recovery & OTA updater moving forward, until things change dramatically. If you want to try different custom recoveries (new builds of TWRP, OrangeFox, PBRP, whatever), feel free; and let us know how it works! But you're on you're own doing that.
- And on the system update side, applying system OTA updates seems to work correctly using the built-in Updater tool (Settings > System > Updater) both with new OTA releases and when choosing a file from "Local Installation". It executes OTA survival scripts correctly from /system/addon.d/ as well. I've personally tested and it correctly preserved Magisk v23 canary and MindTheGapps & NikGapps (on tester fajita) and MinMicroG "system" install package on my daily driver enchilada.
- ...however it has an accidental dependency on Magisk, due to things beyond my control upstream in the ROM. Whoops. Won't work if you don't have Magisk installed.
- FLASHING the old official TWRP 3.5.2_9-0 INSTALLER zip (or newer) on top of OOS 11.x DOES seem to work for now, but you need to be in a recovery environment that allows you to flash that installer in the first place (either by booting into an already-installed TWRP recovery before updating firmware, or by having an Android 11 compatible recovery boot.img to be able to `fastboot boot`). I don't know if it'll keep working in Android 12 or with crDroid 8.
- Look, if you really want to stick with TWRP, I don't blame you. I made bootable Android 11 compatible TWRP images for enchilada & fajita back at 3.5.2, and they still work well enough to `fastboot boot` them and then flash the old official 3.5.2_9-0 installer zips. Look at the attachments at the end of post #2. Also, you may want to try one of Siddhesh's custom recoveries; they probably work even better.
- TL;DR: I prefer TWRP too but current official releases are kinda broken and it's a chore to get the old version installed correctly, so built-in LineageOS-based recovery and Updater app are the supported way to install & update moving forward.
Prerequisites:
- Make sure your bootloader is unlocked (and don't plan on relocking it ffs).
- Make sure you have a reasonably-current, working installation of android platform tools (adb & fastboot command line binaries & necessary drivers) on your computer, with a known-good USB cable (see links in post #2).
- Make sure you've downloaded the most recent full OxygenOS OTA installer zip (11.1.2.2), crDroid zip, matching crDroid boot.img, and whatever Magisk/GApps/microG installation packages you want to use to your computer (see links in post #2).
- Make sure you've backed up whatever data you want to keep to somewhere that's not on your phone; for a new install, we're going to format the data partition and you're going to lose everything from internal storage.
Let's get started!
Updating firmware:
- Reboot to bootloader (with no USB cable connected).
- If you're not already using the stock (LineageOS-based) recovery, you'll need to `fastboot flash boot path/to/boot.img`, substituting in the path & filename for the current crDroid boot.img that you downloaded as part of the prerequisites.
- Reboot to bootloader again (actually loads new bootloader that you just flashed).
- Use Vol +/- buttons to select "Recovery mode" and press Pwr button to boot stock recovery (white & purple on black color scheme, LineageOS logo in the middle).
- Tap "Advanced", then tap "Enter fastboot" (the already-selected first option), and color scheme should change from purple to orange.
- Follow the instructions for extracting the partition images from the official OxygenOS Updater full OTA zip you already downloaded using the "payload-dumper-go" utility, and flashing them one at a time, from https://wiki.lineageos.org/devices/fajita/fw_update, except for the very last command ("fastboot reboot").
- Since those instructions were updated for Android 12, and this is still Android 11-based & depends on using the OxygenOS prebuilt vendor partition contents, you'll also need to run fastboot flash --slot=all vendor vendor.img at the end of the list of commands in the linked LineageOS Wiki article above.
- If you're only updating firmware and were already on crDroid, you can just "fastboot reboot" which will go back to system. If this is part of coming to crDroid from another ROM, continue with the instructions below.
First time installing crDroid to your OP6T, coming from stock OxygenOS 11.x or another ROM (stock LOS-based recovery):
- Update to OxygenOS 11.1.2.2 firmware as described above if you haven't already.
- At the end of that procedure, (re)flash the crDroid boot.img to the `boot` partition of both slots, then reboot to recovery.
- Once you're rebooted into stock recovery (and lo, it was most purple), ADB sideload the crDroid installation zip. It might prompt you with "Install anyway?" on the phone, so don't just walk away from it.
- After the adb sideload has finished and the purple menu at the top comes back, hit the back arrow, then choose "Wipe data" (which WILL format internal storage -- you backed up as noted above, right?).
- Reboot to recovery (causes it to switch slots so any further installations will be on top of the slot that it just installed crDroid into).
- ADB sideload Magisk and/or any GApps packages you want to use. Please note that any time you install something via ADB sideloading, that the install file is technically renamed "sideload.zip" in transit by the ADB protocol, which might cause problems with installers that try to get too clever for their own good and alter behavior based on renaming the installation zip (like MinMicroG), so you might have to get even MORE clever with changing up installation order (like flash MinMicroG/GApps before Magisk so it won't install as a module. I dunno, talk to the package installer authors to get them to just build multiple packages or talk to the LineageOS devs to allow you to decrypt internal storage, copy stuff to internal storage via MTP, and install stuff from internal storage like a proper custom recovery (or at least maybe `adb push` to an unencrypted temp dir in the data partition).
- Reboot system.
- ???
- Profit!
OTA updating from Updater app with OOS 11.x firmware (recommended):
- This is the preferred way now. You just go to Settings > System > Updater, and... install an update. It processes addon.d OTA survival scripts correctly (tested with Magisk, MinMicroG, MindTheGapps, and NikGapps).
- Please note that there's currently an accidental depencency on Magisk being installed for this to work. I don't know if this will get fixed; that's definitely above my pay grade. This appears to have been fixed; huzzah!
- If you're trying to do a "Local Install" of the downloaded zip, please note you NEED to download on a computer & transfer to internal storage via USB cable; downloading files from an app on the phone associates it with a particular app thanks to Android 11+ Scoped Storage/SAF bull**** and will cause the file to be unreadable to the updater app process.
-- Old TWRP-based instructions below the fold (not recommended, but keeping for historical value... probably not accurate but I'm not going to update them more) --
Spoiler: Show/Hide
OTA updating from TWRP with OOS 11.x firmware:
You don't need to remove device protection; it works fine with PIN. Be sure you have a PIN set, or have looked up whatever that arcane chart of pattern > numeric incantations in case of pattern unlock. It's awful.
- Boot into TWRP recovery.
- Choose install, then select crDroid.zip, select additional zips, choose the TWRP installer zip, then slide to confirm flash.
- Reboot recovery.
- Choose install, then select Magisk zip (if using), select additional zips, choose GApps/microG (if using), slide to confirm flash.
- Please keep off of the grass, shine your shoes, wipe your... dalvik.
- Reboot system.
OTA updating from TWRP with OOS 10.x firmware:
- Don't. Update firmware to 11.1.2.2 first.
Reporting bugs:
I'm a parent of three young kids whose industry disappeared in the pandemic and is now full-time house husband & parent-in-charge while my wife is teaching full-time, I'm trying to save my small live-event-turned-streaming-studio company in my spare time. I'm doing in-home caregiving for a family member overnight one day a week. This is the back-up spare-spare-time hobby. I'm not a software developer nor do I know any programming languages, I just wanted a ROM with signature spoofing support and more customization than the unofficial microg-compatible LineageOS builds. So if there are bugs or feature requests, I go over to the crDroid dev chat and ask if someone has time to hold my hand & help. Don't make me get yelled for annoying them, mmkay? That said...
- Logs/screenshots/recordings or it didn't happen. Either the built-in Matlog app, or Syslog (free, open source, available on Play store and F-droid) are your friends here.
- I try to keep an organized notebook of roadmap, feature reqeusts, bug reports, etc. I won't always be able to fix it, but I'll at least look and do my best to ask the actual devs.
- I don't sign into XDA much, so if I haven't said anything, check out the Telegram group. Lots of helpful folks there.
- Please keep your questions in this thread instead of PMing me with them directly, so that the entire class can benefit from the discussion and you can find out if it's just you or if this is a widespread issue.
It's your device to use the way you want of course, and I use Magisk & microG and like to tweak things myself. But don't expect much support if you:
- didn't do a clean flash.
- aren't using the built-in kernel.
- are using extensive modifications (besides Magisk) like Xposed/Riru, Dolby Atmos, Viper4A, etc.
- immediately start using "finalize.zip" or flashing migrate restore zips instead of following the actual instructions.
- are running decrypted.
- re-locked your bootloader for some reason... you're on a custom ROM; don't do that.
crDroid Website - Download here!
Donate - Support development!
Telegram Oneplus6/6t group - Share your best cat pictures!
Source Code:
- Device tree: https://github.com/crdroidandroid/android_device_oneplus_fajita/tree/11.0
- OP6/6T Common device tree: https://github.com/crdroidandroid/android_device_oneplus_sdm845-common/tree/11.0
- hardware/oneplus/ HALs: https://github.com/crdroidandroid/android_hardware_oneplus/tree/11.0-op6
- Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sdm845/tree/11.0

Notes:
- crDroid 7.x (based on Android 11 & LineageOS 18.1) is no longer being actively developed, and I don't know how long someone on the dev team will keep merging monthly security updates. I'll try to keep building releases as long as there are updates, but all my limited time is focused on 9.x/Android 13 bringup now. We're in maintenance mode now, so any outstanding bugs are likely to just remain for perpetuity.
- Yes it supports package signature spoofing permission for microG compatibility out of the box (but will work without ANY GApps/microG implementation installed as well).
- Maintainer does not use GApps, so cannot answer questions about which packages work best from firsthand experience. In general, go with the smallest package you can and then install other Google apps from the Play Store. Please note that if you replace the stock dialer with Google Dialer, you may lose access to the Phone Info menu (*#*#4636#*#*) until you install another dialer. For recommendations, see https://wiki.lineageos.org/gapps.
- Requires OOS 11.1.2.2 firmware (last official release). You should consider using an Android 10 ROM if you want to continue using Android 10 firmware.
- Tested against latest Magisk 24 (with zygisk instead of magiskhide), works well.
- No there won't be official builds with inline GApps; please don't ask.
crDroid 7.30 - May 2023 ASB release notes/changelog:
Changelog since v7.29 official release:
- Merged May 2023 Android Security Bulletin from upstream.
- Whatever the ROM dev team changed upstream in LineageOS and crDroid sources (not much? they're busy with Android 13).
- No changes to device-specific files.
Known issues:
Fajita-specific:
- If you use App Lock and/or Face Unlock, you'll likely run into issues with the FOD circle view starting to flicker randomly into view when it shouldn't be there (like it's not dismissing properly because one part of the security handling is fighting with or doesn't notify the other part that it's done and doesn't need to try to accept a fingerprint any longer). As a knock-on effect, this will also cause "Disable Night Light when FOD is visible" to freak out. I have one person who doesn't use either report that they were getting the random FOD circle anyway, so... if you're having this problem, please make sure you've given MatLog permission to manage files so that it can actually save logs to internal storage and capture a logcat & send it to me. Logs or it didn't happen, etc etc.
Common:
- No f2fs-formatted userdata support, sadly. Doesn't work with the prebuilt vendor partition required for this version of Android. You'll need to reformat data to ext4 before being able to boot (you can fastboot flash the crDroid 8.x or 9.x boot.img if you need a recovery that will let you choose).
- Google Hotword recognition might be kinda broken right now (on more than one custom ROM/device, not just us), and may cause some screw-up that prevents microphone audio from being allowed to go anywhere else if it's enabled.
- If you are stuck at "Android is starting..." looping endlessly, then press power, reboot to bootloader, and follow the instructions for updating firmware to OxygenOS 11.1.2.2 in the first post. It doesn't wipe data, you shouldn't lose anything.
- Some screen-off gestures may not work, due to limitations beyond my control; don't use those gestures. Sorry.
Helpful links:
Download ROM
Android platform tools (adb & fastboot)
OxygenOS 11.1.2.2 Full OTA
Firmware update instructions (LineageOS Wiki)
(Please note that since crDroid 7.x/Android 11 for this device depends on the prebuilt OxygenOS vendor partition, you'll also need to add fastboot flash --slot=all vendor vendor.img to the list of commands in the instructions, just before the final fastboot reboot.
MSMTool (oh now you're in trouble - use latest unless you have a good reason to intentionally downgrade)
Magisk (use latest)
Official TWRP 3.5.2_9-0 install zip (good luck)

MaWalla99 said:
Download: coming soon!
Click to expand...
Click to collapse
will this work with verizon?

Tomkumato said:
will this work with verizon?
Click to expand...
Click to collapse
I don't know since I'm not in the US.

MaWalla99 said:
I don't know since I'm not in the US.
Click to expand...
Click to collapse
Thanks

hi dev thanks for this rom i have successfully installed now, so there is a small info i like to share, that is installing any version of nikgapps apart from core nikgapps will result in bootloop or after even format the data, rom will boot but set up screen says it crashed, so i have installed with core version of nikgapps, rom booted successfully. that's all i have info to share now.

Hi dev ROM is working fantastically after installed all the application I used before, so thanks for it, it has enough customization thanks for it too.

Does NOT work on Verizon.

Hi devs i don't know the reason why this happening, the problem is when i change default launcher to nova launcher system ui automatically crashes, i can't specifically pinpoint the reason, but after launching the Paytm app for first time then paytm also crashed so i don't know what to do now. I have attached logcat from matlog so I think I have captured required info.

Thanks for the ROM. Where is the best place to get A11 gapps?

wangdak said:
Thanks for the ROM. Where is the best place to get A11 gapps?
Click to expand...
Click to collapse
nik gapps

hi all,
I'm on fajita with crdroid 5.11 - Android 9.
i'd like to bump up to this thread's version. any tips for how to go about that - step by step?
I assume it would be something like -- update TWRP, update firmware, then flash rom as usual with instructions in first post?
many thanks

autologic said:
hi all,
I'm on fajita with crdroid 5.11 - Android 9.
i'd like to bump up to this thread's version. any tips for how to go about that - step by step?
I assume it would be something like -- update TWRP, update firmware, then flash rom as usual with instructions in first post?
many thanks
Click to expand...
Click to collapse
1 - remove any passwords used to unlock screens - 2 - Backup all your important data, - 3 - Make sure you're on latest TWRP for Fajita and that you have latest OOS firmware, Gapps, TWRP installer and the ROM you want to install (zip files) copied to your "Downloads " directory, then reboot into recovery mode, - 4 - make sure you're on slot A (tap "reboot", tap slot "A" and reboot to recovery again), 5 - tap "Wipe", "advanced wipe" and select " Dalvick Art/Cache", " data" and "system", - 6 - swipe to wipe, 7 - tap "install" and select OOS, then swipe to install, 8 - install TWRP zip file, 9 - reboot to recovery, - 10 - install OOS on the second slot, 11- install TWRP, 12 - reboot to recovery, 13 - install the new ROM, 14 - tap "Wipe", advanced Wipe", "Dalvick Art/Cache" and "Data", 15 - swipe to wipe, 16 - install TWRP and reboot to recovery, 17 - install GAPPS, - wipe " Dalvick Art/Cache and reboot to system. That's it!

autologic said:
hi all,
I'm on fajita with crdroid 5.11 - Android 9.
i'd like to bump up to this thread's version. any tips for how to go about that - step by step?
I assume it would be something like -- update TWRP, update firmware, then flash rom as usual with instructions in first post?
many thanks
Click to expand...
Click to collapse
Boot in latest TWRP
Flash latest OOS 10
Flash CR Droid Zip
Flash Finalize.zip
Flash latest TWRP
Format data -type Yes to confirm
Reboot to recovery
Flash Gapps & Magisk (Optional)
Coming from a different version of Android, format data is recommended. Backup your data before you do this

Hi LiveDisplay color profile doesn't work ,setting a profile ,once you exit it resets back to normal again

Excellent ROM.
Thanks!

Hi dev i attached a video, in which i try to explain a problem, i can't pinpoint say amazon app only having this kind of problem, but i can say irresponsible of which app suddenly ui will have some kind of problem, it will appear from nowhere after that phone will hang and i need to restart the phone or else battery drains very fast. Kindly look into it. I reinstalled the rom two time freshly, even though it having same kind of problem presist, but i really loved one good feature that is finger print working fantastic even after reboot. OS is not crashing and reboot by itself, app also not crashing but suddenly some part is acting wired. Anyway i will upload the video for proof. I have attached gif file as per xda rules.

I have one last idea in my head instead of using app called migrate to take back up of application installed in my phone and restore to newly installed rom. Better use play store to install all app one by one and see there is any difference, i really love this rom thats why i reinstalling freshly again and again to see any difference possible

I've never used micro g a whole lot in the past but I'm all for it now due to the unbelievable amount of permissions apps ask for and while I love Android I'm no Google person either. I flashed 7.2 CrDroid two days ago and didn't install gapps. Then I went back in twrp and flashed micro g and fdroid from (stable) nano droid installer thread here on XDA. Going to read up more about micro g ..etc.. Op, if you are testing anything that has to do with this or anything feel free to msg me anytime. Ill run whatever through everything possible and gather logs if need be and send them to you properly. Thanks for this rom!! Great job!! Always loved CrDroid! Think i 1st used CrDroid back in 2013 or so. Fantastic rom!! My Screen time on 7.2 CrDroid.

flash713 said:
I've never used micro g a whole lot in the past but I'm all for it now due to the unbelievable amount of permissions apps ask for and while I love Android I'm no Google person either. I flashed 7.2 CrDroid two days ago and didn't install gapps. Then I went back in twrp and flashed micro g and fdroid from (stable) nano droid installer thread here on XDA. Going to read up more about micro g ..etc.. Op, if you are testing anything that has to do with this or anything feel free to msg me anytime. Ill run whatever through everything possible and gather logs if need be and send them to you properly. Thanks for this rom!! Great job!! Always loved CrDroid! Think i 1st used CrDroid back in 2013 or so. Fantastic rom!! My Screen time on 7.2 CrDroid.
Click to expand...
Click to collapse
Yeah I feel you I'm right where you are I think it's time to ditch Google and get a similar setup. Wonder if there's a thread in the 6t section yet? Google still my friend she'll teach me how to set it up, lol

[ROM][OFFICIAL][enchilada][11.0]crDroid Android[v7.30]

NOTICE: crDroid 7.x (Android 11) is now in maintenance-only release mode, and will probably be End-Of-Life'd soon.
I'll be merging monthly Android Security Bulletins from upstream as they're available, and pushing releases, but they're blind builds at this point and I don't have time to troubleshoot them any longer.
Please consider updating to crDroid 9.x (Android 13):
crDroid 9.x XDA thread - OP 6/6T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is built on top of LineageOS, and is designed to increase performance and reliability over stock Android for your device, while also attempting to bring you many of the best features in existence today.
Features
A quick glossary and primer on flashing & slots for A/B devices (like ours):
Spoiler: Show/Hide
- "Clean flash": Removing device protection & clearing user settings before installing a bootable system install zip (usually by either wiping or formatting data, see below).
- "Dirty flash": Flashing a ROM zip (usually upgrading to new version, sometimes just re-flashing the existing one) without wiping data or anything first.
- "Wipe data": Synonymous with "factory reset", accomplished from TWRP recovery by selecting "Wipe", then performing the "Slide to factory reset". Clears user data without erasing any partitions, removing encryption, or deleting contents of internal storage.
- "Format data": Formats the data partition itself, resets all file-based encryption keys, loses all contents of internal storage, and in fact deletes all "user 0" directories (this has some implications for internal storage before & after first boot).
- "User 0" directories are a series of directories that store userdata for the primary user, "Owner", and get created in various places throughout the filesystem on first system boot if they don't exist already. Anything you copy to "internal storage" while booted in recovery after "formatting data" will actually be copied to /data/media/ instead of /data/media/0/, and will become invisible to regular file browsing after first boot once the system has created /data/media/0, since the system will prefer to use that path for internal storage from then on (so you'll need a root file browser to delete things from /data/media, or just ADB sideload things instead of copying after formatting but before booting).
- "OTA package": Originally an abbreviation for "over the air", referring to how a software update could be delivered (as opposed to having to take your phone to a carrier's store for a firmware update via serial/USB connection). The common usage in Android circles is any installation zip file that actually includes a bootable system.
- Some partitions are duplicated (system, vendor, boot, and probably a couple others, but not data) and have a "slot A" & "slot B" copy.
- "Slot A" and "slot B" are absolute designations, but most installer zip scripts use the relative designations: "active" and "inactive". Whichever slot you're booted from currently is "active", and the other one is "inactive".
- Installing a zip file that's flagged as being an OTA package will 1) install the contents to the "inactive" slot, and then 2) flag the bootloader to switch which slot is considered "active" (and booted from) and "inactive" upon next reboot.
- The OxygenOS full OTA zip files and all custom ROM installer zip files are considered "OTA packages" and will trigger a slot switch on next boot after installation.
- You can install multiple OTA zip packages one after the other without rebooting in both the stock recovery and TWRP; they will all get installed into the correct partitions in the "inactive" slot, one on top of the other, and then it will swap active & inactive upon reboot.
- We don't use what are called "delta" updates, which can patch existing partitions by block or by file; we use full filesystem images. So for us, OTA zip packages are really just a bunch of partition filesystem image files all wrapped up into a "payload.bin" with some extra instructions & metadata/checksums, so when you flash a ROM, it overwrites entire partitions at a time instead of individual files or filesystem blocks within that partition. So if you've changed something in a partition like system that gets written as part of flashing an OTA zip, all your changes are gone. The only thing in the system partition afterward will be what was in the system.img that was included in the ROM zip payload.
- The partitions that crDroid, LineageOS, and most custom ROMs for OnePlus 6 & 6T install to when flashing are boot (contains recovery & kernel), dtbo, system, and vbmeta. Some ROMs (like Syberia) build the vendor partition from source instead of just trying to work with the existing OEM vendor partition, so they flash that one too when installing. So you definitely need to flash stock vendor before switching from Syberia or another source-built vendor ROM to one like Lineage or crDroid that uses prebuilt.
- "Prebuilt vendor" vs. "source-built" vendor partitions: when first trying to get a custom ROM working on a new device now that we have separate system & vendor partitions & Google's "Project Treble" is a thing, you'll often just leave the contents of the vendor partition alone, because that's where all the proprietary or device-specific stuff lives (manufacturer specific hardware drivers & interfaces, any DRM libraries, custom frameworks & selinux policies for talking to them), and you make a compatibility map of what framework versions you're compiling against in system and what vendor version they're compatible with or supersede or you overlay updated things that should replace stuff in the vendor partition and keep it in system_ext instead. But you're also limited in that if there are some things in vendor, you CAN'T work around it from the ROM side (like, OnePlus Camera working correctly). So often, once the basics are functioning, the goal is to move to building the contents of the vendor partition from source, because you then have the freedom to fix problems with sepolicy, library/framework mismatches, etc. and make things work with the custom ROM instead of only working with the OEM's flavor of Android, and you can still copy individual pre-compiled files from the stock vendor filesystem image if needed (like if there's no open-source equivalent for some driver). Unfortunately, OnePlus SDM845 (enchilada & fajita, the OP6 & OP6T) never got a proper source-built vendor bringup by the LineageOS team (upon which crDroid is based). And while Syberia has had source built vendor in Android 11 (possibly 10?), it was only done for enchilada and NOT fajita, it's not trivial to unroll & commonize what they've done to apply to other ROMs, and some of the proprietary files they keep are imported from other similar devices/similar chipsets rather than source-built (presumably because the OnePlus ones are modified in a weird way that the open-source components can't hook into, but still not ideal). So for fixing a lot of the issues we still face with lack of things working quite right, or hardware features not available in custom ROMs (especially compared to newer OnePlus devices like the 7, 8, or 9 series), we're kinda stuck, because you can't just implement it against the stock prebuilt vendor.
- "Updating firmware" simply means we're flashing updated contents from the manufacturer into all the OTHER partitions besides the ones that the ROM OTA zip touches. There are another dozen or more of those, besides system & boot, that the full OxygenOS OTA zip would normally write to when you install it. The contents of the system partition in custom ROMs for our device are generally built against a particular version of OxygenOS (mostly the contents of the OEM vendor partition), and we've recently had an entire major Android version update come through from OxygenOS. Some people are still on older firmware that is now dramatically different than what the current custom ROM was intended to deal with (that is, all the stuff from OxygenOS is still based on Android 10, while the ROM is expecting compatibility with Android 11), and while I tend to agree that OxygenOS 10 was better than the current state of OOS 11, that doesn't matter when you're talking about installing the custom ROM over it. So please, keep an eye out in the release notes for what the recommended/required firmware versions are, and remember to update (procedure below).
Notes on custom recoveries with OxygenOS 11 firmware:
Spoiler: Show/Hide
- My understanding (from people smarter than me) is that the android-11 tree of TWRP is kind of a mess at the moment. I had made some 3.6.0_11-0 unofficial builds for both enchilada & fajita, but now they don't even seem to boot and I don't know why. TWRP android-11 tree refuses to mount the system partition where it belongs, and so addon.d OTA survival scripts don't work correctly any longer (which means you're hosed if you use NikGapps and update while booted from a TWRP version ending in "11-0", or if you have Gapps installed as a module and forget to reboot recovery & re-flash Magisk after flashing an update from TWRP).
- Trying to `fastboot boot` an Android 9-based TWRP image (like official 3.5.2_9-0 twrp.img) after installing OxygenOS 11 doesn't work, and will drop you into Qualcomm Crash Dump mode. Don't try to flash it as your boot partion, either.
- Meanwhile, stock LineageOS-based recovery, for all its shortcomings, has working fastbootd (aka "Userspace fastboot", which is what happens when you go to "Advanced", then choose "Enter fastboot" and the background colors go from purple to orange) that lets you flash both slots at once and unlocks critical partitions, while the OnePlus OEM bootloader (where it says "Fastboot Mode" in a square, then goes to the big green "START" text over white & dark red terminal font type text) can't be used to flash every partition to update firmware. Personally, I still think of it as wannabe-class and not a "real" custom recovery until the Lineage team 1) implements userdata decryption so you can manage files in /data and install updates from internal storage, and 2) allows for a factory reset the way we've always all understood it ("wipe data") WITHOUT nuking the contents of internal storage for no good reason ("formatting data"). But since crDroid is LineageOS-based, it's what we've got, and fastbootd is the best way to update firmware.
- With all that being said, since it's likely TWRP will only get MORE broken with Android 12 looming large, we're officially only going to support the built-in LineageOS-based recovery & OTA updater moving forward, until things change dramatically. If you want to try different custom recoveries (new builds of TWRP, OrangeFox, PBRP, whatever), feel free; and let us know how it works! But you're on you're own doing that.
- And on the system update side, applying system OTA updates seems to work correctly using the built-in Updater tool (Settings > System > Updater) both with new OTA releases and when choosing a file from "Local Installation". It executes OTA survival scripts correctly from /system/addon.d/ as well. I've personally tested and it correctly preserved Magisk v23 canary and MindTheGapps & NikGapps (on tester fajita) and MinMicroG "system" install package on my daily driver enchilada.
- ...however it has an accidental dependency on Magisk, due to things beyond my control upstream in the ROM. Whoops. Won't work if you don't have Magisk installed.
- FLASHING the old official TWRP 3.5.2_9-0 INSTALLER zip (or newer) on top of OOS 11.x DOES seem to work for now, but you need to be in a recovery environment that allows you to flash that installer in the first place (either by booting into an already-installed TWRP recovery before updating firmware, or by having an Android 11 compatible recovery boot.img to be able to `fastboot boot`). I don't know if it'll keep working in Android 12 or with crDroid 8.
- Look, if you really want to stick with TWRP, I don't blame you. I made bootable Android 11 compatible TWRP images for enchilada & fajita back at 3.5.2, and they still work well enough to `fastboot boot` them and then flash the old official 3.5.2_9-0 installer zips. Look at the attachments at the end of post #2. Also, you may want to try one of Siddhesh's custom recoveries; they probably work even better.
- TL;DR: I prefer TWRP too but current official releases are kinda broken and it's a chore to get the old version installed correctly, so built-in LineageOS-based recovery and Updater app are the supported way to install & update moving forward.
Prerequisites:
- Make sure your bootloader is unlocked (and don't plan on relocking it ffs).
- Make sure you have a reasonably-current, working installation of android platform tools (adb & fastboot command line binaries & necessary drivers) on your computer, with a known-good USB cable (see links in post #2).
- Make sure you've downloaded the most recent full OxygenOS OTA installer zip (11.1.2.2), crDroid zip, matching crDroid boot.img, and whatever Magisk/GApps/microG installation packages you want to use to your computer (see links in post #2).
- Make sure you've backed up whatever data you want to keep to somewhere that's not on your phone; for a new install, we're going to format the data partition and you're going to lose everything from internal storage.
Let's get started!
Updating firmware:
- Reboot to bootloader (no USB cable connected).
- If you're not already using the stock (LineageOS-based) recovery, you'll need to `fastboot flash boot path/to/boot.img`, substituting in the path & filename for the current crDroid boot.img that you downloaded as part of the prerequisites.
- Reboot to bootloader again (actually loads new bootloader that you just flashed).
- Use Vol +/- buttons to select "Recovery mode" and press Pwr button to boot stock recovery.
- Tap "Advanced", then tap "Enter fastboot" (the already-selected first option).
- Follow the instructions for extracting the partition images from the official OxygenOS Updater full OTA zip you already downloaded using the "payload-dumper-go" utility, and flashing them one at a time, from https://wiki.lineageos.org/devices/enchilada/fw_update, except for the very last command ("fastboot reboot").
- Since those instructions were updated for Android 12, and this is still Android 11-based & depends on using the OxygenOS prebuilt vendor partition contents, you'll also need to run fastboot flash --slot=all vendor vendor.img at the end of the list of commands in the linked LineageOS Wiki article above.
- If you're only updating firmware and were already on crDroid, you can just "fastboot reboot" which will go back to system. If this is part of coming to crDroid from another ROM, continue with the instructions below.
First time installing crDroid to your OP6, coming from stock OxygenOS 11.x or another ROM (stock LOS-based recovery):
- Update to OxygenOS 11.1.2.2 firmware as described above if you haven't already.
- At the end of that procedure, (re)flash the crDroid boot.img to the `boot` partition of both slots, then reboot to recovery.
- Once you're rebooted into stock recovery, ADB sideload the crDroid installation zip. It might prompt you with "Install anyway?" on the phone, so don't just walk away from it.
- After the adb sideload has finished and the purple menu at the top comes back, hit the back arrow, then choose "Wipe data" (which WILL format internal storage -- you backed up as noted above, right?).
- Reboot to recovery (causes it to switch slots so any further installations will be on top of the slot that it just installed crDroid into).
- ADB sideload Magisk and/or any GApps packages you want to use. Please note that any time you install something via ADB sideloading, that the install file is technically renamed "sideload.zip" in transit by the ADB protocol, which might cause problems with installers that try to get too clever for their own good and alter behavior based on renaming the installation zip (like MinMicroG), so you might have to get even MORE clever with changing up installation order (like flash MinMicroG/GApps before Magisk so it won't install as a module. I dunno, talk to the package installer authors to get them to just build multiple packages or talk to the LineageOS devs to allow you to decrypt internal storage, copy stuff to internal storage via MTP, and install stuff from internal storage like a proper custom recovery (or at least maybe `adb push` to an unencrypted temp dir in the data partition).
- Reboot system.
- ???
- Profit!
OTA updating from Updater app with OOS 11.x firmware (recommended):
- This is the preferred way now. You just go to Settings > System > Updater, and... install an update. It processes addon.d OTA survival scripts correctly (tested with Magisk, MinMicroG, MindTheGapps, and NikGapps).
- Please note that there's currently an accidental depencency on Magisk being installed for this to work. I don't know if this will get fixed; that's definitely above my pay grade. This appears to have been fixed; huzzah!
- If you're trying to do a "Local Install" of the downloaded zip, please note you NEED to download on a computer & transfer to internal storage via USB cable; downloading files from an app on the phone associates it with a particular app thanks to Android 11+ Scoped Storage/SAF bull**** and will cause the file to be unreadable to the updater app process.
-- Old TWRP-based instructions below the fold (not recommended, but keeping for historical value... probably not accurate but I'm not going to update them more) --
Spoiler: Show/Hide
OTA updating from TWRP with OOS 11.x firmware:
You don't need to remove device protection; it works fine with PIN. Be sure you have a PIN set, or have looked up whatever that arcane chart of pattern > numeric incantations in case of pattern unlock. It's awful.
- Boot into TWRP recovery.
- Choose install, then select crDroid.zip, select additional zips, choose the TWRP installer zip, then slide to confirm flash.
- Reboot recovery.
- Choose install, then select Magisk zip (if using), select additional zips, choose GApps/microG (if using), slide to confirm flash.
- Please keep off of the grass, shine your shoes, wipe your... dalvik.
- Reboot system.
OTA updating from TWRP with OOS 10.x firmware:
- Don't. Update firmware to 11.1.2.2 first.
Reporting bugs:
I'm a parent of three young kids whose industry disappeared in the pandemic and is now full-time house husband & parent-in-charge while my wife is teaching full-time, I'm trying to save my small live-event-turned-streaming-studio company in my spare time. I'm doing in-home caregiving for a family member overnight one day a week. This is the back-up spare-spare-time hobby. I'm not a software developer nor do I know any programming languages, I just wanted a ROM with signature spoofing support and more customization than the unofficial microg-compatible LineageOS builds. So if there are bugs or feature requests, I go over to the crDroid dev chat and ask if someone has time to hold my hand & help. Don't make me get yelled for annoying them, mmkay? That said...
- Logs/screenshots/recordings or it didn't happen. Either the built-in Matlog app, or Syslog (free, open source, available on Play store and F-droid) are your friends here.
- I try to keep an organized notebook of roadmap, feature reqeusts, bug reports, etc. I won't always be able to fix it, but I'll at least look and do my best to ask the actual devs.
- I don't sign into XDA much, so if I haven't said anything, check out the Telegram group. Lots of helpful folks there.
- Please keep your questions in this thread instead of PMing me with them directly, so that the entire class can benefit from the discussion and you can find out if it's just you or if this is a widespread issue.
It's your device to use the way you want of course, and I use Magisk & microG and like to tweak things myself. But don't expect much support if you:
- didn't do a clean flash.
- aren't using the built-in kernel.
- are using extensive modifications (besides Magisk) like Xposed/Riru, Dolby Atmos, Viper4A, etc.
- immediately start using "finalize.zip" or flashing migrate restore zips instead of following the actual instructions.
- are running decrypted.
- re-locked your bootloader for some reason... you're on a custom ROM; don't do that.
crDroid Website - Download here!
Donate - Support development!
Telegram Oneplus6/6t group - Share your best cat pictures!
Source Code:
- Device tree: https://github.com/crdroidandroid/android_device_oneplus_enchilada/tree/11.0
- OP6/6T Common device tree: https://github.com/crdroidandroid/android_device_oneplus_sdm845-common/tree/11.0
- hardware/oneplus/ HALs: https://github.com/crdroidandroid/android_hardware_oneplus/tree/11.0-op6
- Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sdm845/tree/11.0

Notes:
- crDroid 7.x (based on Android 11 & LineageOS 18.1) is no longer being actively developed, and I don't know how long someone on the dev team will keep merging monthly security updates. I'll try to keep building releases as long as there are updates, but all my limited time is focused on 9.x/Android 13 bringup now. We're in maintenance mode now, so any outstanding bugs are likely to just remain for perpetuity.
- Yes it supports package signature spoofing permission for microG compatibility out of the box (but will work without ANY GApps/microG implementation installed as well).
- Maintainer does not use GApps, so cannot answer questions about which packages work best from firsthand experience. In general, go with the smallest package you can and then install other Google apps from the Play Store. Please note that if you replace the stock dialer with Google Dialer, you may lose access to the Phone Info menu (*#*#4636#*#*) until you install another dialer. For recommendations, see https://wiki.lineageos.org/gapps.
- Requires OOS 11.1.2.2 firmware (last official release). You should consider using an Android 10 ROM if you want to continue using Android 10 firmware.
- Tested against latest Magisk 24 canary (with zygisk instead of magiskhide), works well.
- No there won't be official builds with inline GApps; please don't ask.
crDroid 7.30 - May 2023 ASB release notes/changelog:
Changelog since v7.29 official release:
- Merged May 2023 Android Security Bulletin from upstream.
- Whatever the ROM dev team changed upstream in LineageOS and crDroid sources (not much? they're busy with Android 13+).
- No changes to device-specific files.
Known issues:
- No f2fs-formatted userdata support, sadly. Doesn't work with the prebuilt vendor partition required for this version of Android. You'll need to reformat data to ext4 before being able to boot (you can fastboot flash the crDroid 8.x or 9.x boot.img if you need a recovery that will let you choose).
- Google Hotword recognition might be kinda broken right now (on more than one custom ROM/device, not just us), and may cause some screw-up that prevents microphone audio from being allowed to go anywhere else if it's enabled.
- If you are stuck at "Android is starting..." looping endlessly, then press power, reboot to bootloader, and follow the instructions for updating firmware to OxygenOS 11.1.2.2 in the first post. It doesn't wipe data, you shouldn't lose anything.
- Some screen-off gestures may not work, due to limitations beyond my control; don't use those gestures. Sorry.
Helpful links:
Download ROM
Android platform tools (adb & fastboot)
OxygenOS 11.1.2.2 Full OTA
Firmware update instructions (LineageOS Wiki)
(Please note that since crDroid 7.x/Android 11 for this device depends on the prebuilt OxygenOS vendor partition, you'll also need to add fastboot flash --slot=all vendor vendor.img to the list of commands in the instructions, just before the final fastboot reboot.
MSMTool (oh now you're in trouble - use latest unless you have a good reason to intentionally downgrade)
Magisk (use latest)
Official TWRP 3.5.2_9-0 install zip (good luck)

Looking forward on this one, thank you for the effort!

Hopefully android auto and face unlock are working. Thanks in advance.

gray_wolf said:
Hopefully android auto and face unlock are working. Thanks in advance.
Click to expand...
Click to collapse
Can't say anything about Android Auto, but Face Unlock works just fine!

MaWalla99 said:
Can't say anything about Android Auto, but Face Unlock works just fine!
Click to expand...
Click to collapse
Great, will test and report about the android auto and overall Rom. Thanks again.

DC dimming seems to be missing

Welcome back team with a11...even with initial build rom is so stable , like this rom simplicity with so many customisations thankyou

Screenshot ???

vindipi said:
Screenshot ???
Click to expand...
Click to collapse
This Rom has latest Android security patch of January and for screenshots open and scroll down this website
crDroid.net - increase performance and reliability over stock Android for your device
official crDroid ROM blog
crdroid.net

what gapps

DRAKOITYU said:
what gapps
Click to expand...
Click to collapse
I personally used nikgapps...may be all are compatible

gray_wolf said:
Hopefully android auto and face unlock are working. Thanks in advance.
Click to expand...
Click to collapse
After running the Rom for 5 days now I can confirm that it's very stable and has tons of customization. Unfortunately though android auto is not working. face unlocking, camera, etc works fine. Would appreciate it if you could fix the android auto issue in the future build.

Anyone else having issues with GPay? I'm using Magisk, hidden, and GPay still won't work.

Is it possible to update crDroid from 6.13 to 7.2 without data formatting (keeping application and data)?

MaWalla99 said:
Download ROM
TWRP (use 3.5.0 or higher)
Magisk (use 21.2 or higher)
Click to expand...
Click to collapse
Hey, I have the twrp-3.3.1-18-enchilada-Q-mauronofrio TWRP installed on my Oneplus 6, do I still need to upgrade it to the one which you are recommending? I'd rather go with the one that I currently have and not go through the hassle of updating the recovery. That being said, obviously you would know much better.
Please guide
TIA

mahroze said:
Hey, I have the twrp-3.3.1-18-enchilada-Q-mauronofrio TWRP installed on my Oneplus 6, do I still need to upgrade it to the one which you are recommending? I'd rather go with the one that I currently have and not go through the hassle of updating the recovery. That being said, obviously you would know much better.
Please guide
TIA
Click to expand...
Click to collapse
Twrp 3.3 should work fine with the rom. You can keep using it if you want to. However, there is no extra step to use 3.5 vs 3.3. You have to flash twrp after flashing the rom so you can upgrade to 3.5 by just flashing it instead of 3.3.

Quick questions, this rom have smart charging feature?

Firstly, I just want to say this is the most awesome ROM I've tried and i've sat here for a week trying every rom I could get find on the net. It's almost flawless... except for a few hugely killer problems that will sadly make this ROM unusable for me... even though I love it soooo much and if only these things worked... this would be the most amazing ROM ever.
1. After installing GPS doesn't work.
2. When I get a phonecall... I hear the ring... but nothing happens on the screen... so I can't pickup the call. I see after i got a missed call... but i can't answer calls when they're calling... even if I go to the homescreen from whatever app i was using when i got the call... click on the phone icon.... still nothing. Can't answer the call.
3. Text messages simply don't arrive. If I flash the rom back to stock Oxygen OS ... then the text message comes through. But it's a bit late when you're trying to get a verifiaction SMS sent to you to open an messanging app. Can't use the app because i can't get the verification SMS.
If these three things get fixed... omg this will literally be the best ROM ever.
There is a 4th issue... and for me it's important... but it's probably not any fault really of crDroid ROM to be fair...
Very surprisingly... and I just wanted to see if it would work.... kali nethunter for Oxygen OS which is for droid 10 installs over the top of this rom which is droid 11... to much surprise! ...and almost flawlessly... only issue is it doesn't recognise HID interface.
Man... with these 4 things working... this ROM together with nethunter would make for the most badass hacker pentester phone on the planet... save only for the exact same thing on a oneplus 7 or 8 pro.
Many thanks to the devs of this awesome ROM... who hopefully can get 1, 2, and 3 working in the not too distant future... pretty please?
4 is more of a hope and a prayer... but it would be soooo freaking awesome.

not_the_droid_ur_lookin4 said:
Firstly, I just want to say this is the most awesome ROM I've tried and i've sat here for a week trying every rom I could get find on the net. It's almost flawless... except for a few hugely killer problems that will sadly make this ROM unusable for me... even though I love it soooo much and if only these things worked... this would be the most amazing ROM ever.
1. After installing GPS doesn't work.
2. When I get a phonecall... I hear the ring... but nothing happens on the screen... so I can't pickup the call. I see after i got a missed call... but i can't answer calls when they're calling... even if I go to the homescreen from whatever app i was using when i got the call... click on the phone icon.... still nothing. Can't answer the call.
3. Text messages simply don't arrive. If I flash the rom back to stock Oxygen OS ... then the text message comes through. But it's a bit late when you're trying to get a verifiaction SMS sent to you to open an messanging app. Can't use the app because i can't get the verification SMS.
If these three things get fixed... omg this will literally be the best ROM ever.
There is a 4th issue... and for me it's important... but it's probably not any fault really of crDroid ROM to be fair...
Very surprisingly... and I just wanted to see if it would work.... kali nethunter for Oxygen OS which is for droid 10 installs over the top of this rom which is droid 11... to much surprise! ...and almost flawlessly... only issue is it doesn't recognise HID interface.
Man... with these 4 things working... this ROM together with nethunter would make for the most badass hacker pentester phone on the planet... save only for the exact same thing on a oneplus 7 or 8 pro.
Many thanks to the devs of this awesome ROM... who hopefully can get 1, 2, and 3 working in the not too distant future... pretty please?
4 is more of a hope and a prayer... but it would be soooo freaking awesome.
Click to expand...
Click to collapse
You have been positing this in more than one thread. This has nothing to do with any rom, and is related to what you are doing with your phone or the phone itself. Telephony is flowless on every Android 11 custom rom for Oneplus 6. And so is GPS, which literally connects in seconds.
First thing you should do is: disable wifi calling, because if your provider doesn't have the feature (or you are not provisioned for it), that could cause your problems. Next, uninstall any mode you might have. Try calling without Gapps.
Also, if you ever used Syberia Rom, you got custom /vendor, which would not work with other custom roms that use stock /vendor. So, you need to re-flash full stock rom onto both slots, which is a pre-requisite for flashing most custom roms. Then follow directions for installing a custom rom.

Database Develop

welcome