Related
Latest Ufirm QE2 Nougat Firmware For The S7 Flat Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G930U_QE2Files.zip
UFIRM_G930_Odin_Firmware.zip
FlashFire_Flashable_G930UFirmware.zip
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G930_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G930_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G930U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G930UFirmware.zip
7. Copy AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 to your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip to your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
In the OP I had the ADB_Root_G930U_QE2Files.zip linked to the ADB_Root_G935U_QE2Files.zip zip so please make sure you have the ADB_Root_G930U_QE2Files.zip when downloading. Its fixed in the OP now so just double check
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
Thanks for all your hard work . I just installed this so far so good but I am missing Wi-Fi calling. Is that normal or am I just not looking in the correct place? Thanks
ledezma2003 said:
Thanks for all your hard work . I just installed this so far so good but I am missing Wi-Fi calling. Is that normal or am I just not looking in the correct place? Thanks
Click to expand...
Click to collapse
You may have to flash the TMO version of this rom
jrkruse said:
You may have to flash the TMO version of this rom
Click to expand...
Click to collapse
Ok will try that when I get a chance. Thanks again.
Thx for an awesome rom.
Sorry if this question is asked before but couldn't find a solution (checked Verizon thread as well).
I am running Playstore version ROM and everything is working fine except Video Recording.
Photo is fine but when I record a video with included Camera NX, it only plays sound and the screen is either still or black.
I have been taking a needed break. I will update all my s7 roms including this one in the next few days
Nice
That rom can flash for g930p? tks your work!!
@jrkruse
Thanks for all your contributions to this device. I just bought this device and I've been diving through the forums trying to gather as much info on this locked down device.
Could you provide me with just the boot images that don't check the system image and from what model/rom are they from?
Oh and could you provide the partitions locations? The latest roms have an updated Knox that blocks SU from doing it's thing and I have to perform everything via adb (eng boot).
Blank screen
Hello,
I am on your custom rom and the phone was working fine for a day. After I restarted the phone I am not able to see the lockscreen. Its just blank. I do hear the sound of taking a screenshot when I press the buttons and I also can see the " shut down, restart, emg mode" buttons when I hold the power button but no lockscreen. I tried running the recovery boot img but nothing changed.
There is some kind of issue at the locksceen after a restart.
I'm Stuck
jrkruse said:
Latest Ufirm QE2 Nougat Firmware For The S7 Flat Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G930U_QE2Files.zip
UFIRM_G930_Odin_Firmware.zip
FlashFire_Flashable_G930UFirmware.zip
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G930_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G930_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G930U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G930UFirmware.zip
7. Copy AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 to your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip to your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
Click to expand...
Click to collapse
I followed the directions up to Step 7.
For the life of me I can not get the AP file to copy to my SD card. Yes I have enough space on it and I can get the ROM copied.
I tried copying the AP file with a file explorer, on my PC, external card reader. Every time I try, it gets to about 95-99% and says "copy failed".
I know it says flashfire only, but is that my only option?
Reegs said:
I followed the directions up to Step 7.
For the life of me I can not get the AP file to copy to my SD card. Yes I have enough space on it and I can get the ROM copied.
I tried copying the AP file with a file explorer, on my PC, external card reader. Every time I try, it gets to about 95-99% and says "copy failed".
I know it says flashfire only, but is that my only option?
Click to expand...
Click to collapse
In my case I created a folder named Download in Internal Storage and copied Zip and AP files there. I didn't have trouble coping files there.
From my experience & guess, you may still have old files & settings even though you flashed U-firm files Step 1-2.
Try to access recovery mode and do factory reset and see if this helps. Make sure you backup all important files to External SD because it will factory reset.
So I rooted my phone using Araltd's guide in this forum. I've got a couple of questions about this rom...
1. If I were to flash this rom to my device, would it remove my root access?
2. What's device performance like? After rooting, my device is very slow and buggy. Will this fix that?
3. Will my device still be full of T-Mobile's bloatware?
Thanks!
wolfpls254 said:
So I rooted my phone using Araltd's guide in this forum. I've got a couple of questions about this rom...
1. If I were to flash this rom to my device, would it remove my root access?
2. What's device performance like? After rooting, my device is very slow and buggy. Will this fix that?
3. Will my device still be full of T-Mobile's bloatware?
Thanks!
Click to expand...
Click to collapse
1. Yes, it will remove Root Access but you can still use ADB to do root stuff like push / pull files.
2. Since it will use stock boot instead of ENG boot, it will fix the lag issue.
3. This is U (universal) firmware so it won't have Tmobile bloat but it will have Samsung bloat/apps. During the install you can also choose de-bloat level too. From my experience BS-Free (2nd one), is both lightweight and stable. If you go with Playstore level (most lightweight, replace Samsung Apps with Google ones), you will have trouble with camera.
kyungone said:
1. Yes, it will remove Root Access but you can still use ADB to do root stuff like push / pull files.
2. Since it will use stock boot instead of ENG boot, it will fix the lag issue.
3. This is U (universal) firmware so it won't have Tmobile bloat but it will have Samsung bloat/apps. During the install you can also choose de-bloat level too. From my experience BS-Free (2nd one), is both lightweight and stable. If you go with Playstore level (most lightweight, replace Samsung Apps with Google ones), you will have trouble with camera.
Click to expand...
Click to collapse
Do you know how this rom compares to the QF6 one which seems to be a bit more popular?
wolfpls254 said:
Do you know how this rom compares to the QF6 one which seems to be a bit more popular?
Click to expand...
Click to collapse
The QF6 ROM you mentioned is T-mobile firmware so it will have Tmobile apps. Most of them can be removed from ROM install or disabled after.
Other than that there's no performance difference.
If you want Tmobile like environment with Tmobile update schedule, go with T-mobile one. If you want less carrier apps, go with U-Firmware one.
I will no longer be updating my s7 threads until the time Oreo is released with root method. For now I have worked with @stang5litre to bring my non-root method to his amazing rom. He currently has a nougat release found here http://stang5litre-roms.proboards.com/
I keep getting samsung pay connection error. any fixes? i tried factory reset and reset settings, but the app still doesnt work. do i have to reflash the rom?
amdeng said:
I keep getting samsung pay connection error. any fixes? i tried factory reset and reset settings, but the app still doesnt work. do i have to reflash the rom?
Click to expand...
Click to collapse
If you at any point tried to root it or flashed the modified boot image then you are no longer passing the safteynet checks, my suggestion is to do a clean install and see if it works then try it again making sure you don't root after you are done installing this rom.
I recently started experimenting with Android 10 and found a fully working setup. So I'm deciding to share my current setup
#USE THIS AT YOUR OWN RISK!
I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE DUE TO A BAD ROM FILE OR ELSE!#
#BUGS: NFC isn't working on downloadable build
You tell me#
NOTE: you can also use his newer builds. BUT those aren't preconfigured. For patches that you will need see 3rd post!
Requirements: latest twrp from official source,
Oreo firmware.
This Google play services APK:
https://drive.google.com/file/d/1V8ByPJx_hOoPpQNrG0LQcXzhHpFflN-I/view
I think that's it
Step 1: Download jarlpenguin's latest treble build here:
https://github.com/MontanaDevelopme.../lineage-16.0-20190713-UNOFFICIAL-montana.zip
Install it and wait for it to go into the lineage is setup screen. Reboot to recovery (you can download a rom by just going through setup, but all installed apps will be wiped!)
Step 2: if you haven't already download a rom of choice with a build date similar to this: 201910##
These builds should work with sim-card and possibly gapps
But I recommend this rom (please extract it first, otherwise you won't be able to flash this) : https://mega.nz/#!EE11mZyC!_45oKcdNv8djsA8CEh2ZVoTDkic3BCpLfFfU9TLUhes
Step 3: wipe system and data and head to the install section
Step 4: hit "install image" in the bottom right corner and navigate to the location of the extracted .img file
Step 5: select "system image" after pressing it and swipe to flash
Step 6: wait for it to boot (this can take quite a while so, please be patient!)
Step 7: when the device is booted, immediately head into the files application and install the Google play services app from the folder you put it in.
Step 8: after a while, the "completing system update" message should disappear. But there still is one problem... As this is a ported rom (I know I didn't mention this before) this still has the "system updater" app. So, you might disable that, otherwise it flashes a incompatible rom file.
ENJOY!
###ROOT###
to root the ROM, you need phh magisk, you should easily find it on Google or a search engine of choice. THE NORMAL BUILDS DON'T WORK, phh magisk is made for Android 10 treble builds using phhussons base or patches. That's why the normal version doesn't work
If you need help, feel free to contact me on telegram! @Rush
Sneak 100 profile picture
###GCAM###
To use gcam you should flash a Magisk module called:
"Several fixes for Moto G5/G5s"
Some apks may still not work though... As I haven't figured one out which 100% works
###Alternative ROMs###
To use alternative ROMs you will need to (most of the time) use a different lineage OS version by JarlPenguin together with only the boot & vendor images listed below:
https://drive.google.com/folderview?id=1QztsGvkhURcoCp-FjI40mvUpLp5NHSpj
Also, you know that a room won't boot when TWRP crashes, so don't even try, and no, even though the lineage 17.1 alpha build does "support" project treble, it doesn't have any better compatibility with Android 10 ROMs,
The only ROMs with at least some features I could get running is really just Pixeldust X ported from the pixel 1 using erfans tools
And this also works, of you are using (again) a newer or the latest build together with patches (see boot&vendor images above):
https://sourceforge.net/projects/zj...el-Aonly-10-20191120-GSI.img-1640.7z/download
Don't forget to extract this first! /\
Note: this newer build has NO MOTO GESTURES AT ALL
Sadly, I don't think there is a fix to that
### EVOLUTION X ###
I finally found a build which is working but. Uhhhh is kind complicated to bit to it first time
Basically you follow the normal tutorial, and then replace the advertised build with the latest 202001xx build by jarl
then wait for boot
Then reboot to recovery, and wipe system and data.
Reboot (I know that nothing is installed rn)
Select recovery and boot
Flash the evolution X .IMG fine and hope for it to but crash
Sadly,
There isn't even a guaranteed boot if you do that
But it will do the job good enough
Also, you won't need the GMS services APK anymore as this has everything already updated to ****
Please DONT flash the vendor and boot image patches as these will not allow the device to boot for some godforsaken reason
Link (please extract first):
https://sourceforge.net/projects/de...lution-X_3.3_20191111_ARM64-A.img.xz/download
Installing Lineage
Few quick things.
LOS 18.1 is now official so the guide will now just be covering that.
I also want to address a common question, you can use Windows for this process. I prefer Linux, and Fastboot just works in Linux without driver issues. If you have Fastboot and ADB working in Windows already feel free to use that if you want.
Frequently asked Questions:
This looks like a lot of work, is there an easier way to install? Try the LOS Wiki Method.
Using TWRP 3.5.2_9-01. Start off Fresh. Install OOS using the Fastboot ROM.
Start off with a fresh install of OOS. You need the latest version of OOS 10. I typically use a the fastboot ROMs for this as it will do both slots for me at once. (Alternatively you can use TWRP and install the ZIPs and do it twice to get it on both slots, or my least favorite, the MSM Tool if you want. Doesn't matter how OOS ends up on both slots, as long as it ends up on both slots.)
I use Linux, and honestly I feel like it's easier and more reliable for fastboot and ADB so that's what I'm including here in these steps. It's easy to boot from a USB.
To create a bootable Linux flash drive you can use Unetbootin, which you can download for free here (Your other option would be to burn the ISO straight to a DVD and skip the unetbootin step):
https://unetbootin.github.io/
For Linux, I'm using Linux Mint Cinnamon, You can download for free here:
https://www.linuxmint.com/download.php
Then run unetbootin (yours will look a little different, I'm running it in Linux):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Point it to the Linux ISO, and tell it where an empty flash drive is. It will erase everything on the flash drive. Afterwards you can load whatever you want on the flash drive. However be aware when booting Linux from this drive you can't access what is on the drive (at least not by normal methods).
After this has successfully completed, reboot the PC, and boot from the USB drive. Your PC will boot into Linux (turning off the PC and removing the USB drive will make it boot up like normal again).
Next we need to install fastboot and adb. You need to open up the "start menu" and open the "synaptic package manager". You can find this stuff in the menus, however the easiest way to get to these items is to just start typing the name of the item. See below:
Search fastboot, click the boxes, choose install. Then search for ADB, click the boxes, choose install and then click apply. It's that easy it will download everything that's needed and install.
Time to open up a terminal:
Just to make sure we don't run into any problems we need to update adb and fastboot. In the terminal run these commands to update fastboot and adb (this is downloading them directly from Google).
wget https://dl.google.com/android/repository/platform-tools-latest-linux.zip
unzip \platform-tools-latest-linux.zip
sudo cp platform-tools/adb /usr/bin/adb
sudo cp platform-tools/fastboot /usr/bin/fastboot
You will also need the appropriate fastboot ROM. Fastboot ROMs available in this thread. The catch being that thread is no longer updated. So we will need to make our own fastboot rom. To do this we need two things:
1. The stock rom zip (OP Site).
2. Payload dumper. I've yet to get the one from the GitHub link to work, so I've been using the one from this Article. Direct Download Link
You need to extract the payload.bin file from the stock rom zip. Extract the payload_dumper files as well, and place everything in the same folder. Payload_dumper requires python3. Open up Synaptic again, search for python3.6 and install it. Now open a terminal so we can extract the images from the payload.bin.
Navigate to the location of payload_dumper and your payload.bin file. In my case my commands are:
cd Desktop <-- switches to the Desktop folder
cd payload_dumper <-- switches to the payload_dumper folder on the Desktop
python3 payload_dumper.py payload.bin <-- runs the payload_dumper "program" and extract the images from the payload.bin
Now would be a good time to back everything up. The phone will get wiped. Extract the fastboot images to a folder that is easy to find. I would recommend the Desktop.
Now it's time to flash all those images we just extracted using payload dumper. Place the phone in fastboot mode. You can do this using the advanced reboot menu, ADB, or the key combinations (all key combos listed below for reference):
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
You can flash the images one by one or use a script. My script is available here. Flashing the fastboot ROM should look something like this:
That image explained:
cd Desktop <-- Switched the directory to the Desktop the default directory when you open up the terminal is the /home directory.
cd flash <-- I put my fastboot images in a folder called flash. This stuff is case sensitive. My folder was all lowercase.
sudo fastboot devices <-- Is just checking to see if my PC can see my phone, and making sure it's in fastboot. Sudo is necessary for this distro, as both fastboot and ADB must be run as root.
sudo sh FlashThese.sh <-- Tells the terminal to run my script, since the script contains fastboot commands it must be run as root.
At the end you should get something like this:
Then just choose start form Fastboot (If you were previously on a custom ROM go straight to recovery and wipe everything). Not booting and getting dumped off at the OnePlus recovery screen is nothing to worry about. Choose your language of choice, Wipe data and cache, Erase everything (Music, pics, etc), This can not be undone, continue. After that the phone will boot. Once booted enable developer options, advanced reboot, and reboot to fastboot.
2. Installing TWRP.
First step is to boot the correct TWRP image. Grab the current TWRP from the official site. You need both files, the img file, and the installer. Once again from the terminal:
The image explained:
cd Desktop <-- Switched the directory to the Desktop the default directory when you open up the terminal is the /home directory.
sudo fastboot devices <-- Is just checking to see if my PC can see my phone, and making sure it's in fastboot. Sudo is necessary for this distro, as both fastboot and ADB must be run as root.
sudo fastboot boot twrp-3.5.2_9-0-fajita.img * <-- Sends that TWRP image to the phone to be booted temporarily. Only boot this, never run the command "flash".
Once in TWRP the phone should show up as a media device so you can copy files to it. Copy the TWRP installer over to it. Choose Install from the TWRP menu and navigate to where you placed the TWRP installer. Press on it, and swipe to confirm flash. When it is done hit the back button until you are back out to the main menu.
From the main menu choose reboot, and choose Recovery:
The first time you try and reboot the official version of TWRP it will ask you if you want to install the TWRP app. Do NOT install the app. In the settings you can disable this prompt. Your other option is just uncheck both boxes at the screen you see below when you get to it, and then click the button that says do not install. Do use the slider. At that point the phone will reboot as to recovery as you selected.
Now that you are back in TWRP that is now installed, time to wipe the phone. From the main menu choose Wipe. Swipe the factory reset slider at the bottom. Then hit back. Next hit Format Data. Type Yes to Continue. Hit back to continue. Keep hitting back till you get to the main menu.
Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. So go back into the reboot menu, choose reboot to recovery again (swipe to allow modifications if it asks). You must do this after formatting data.
3. Install Lineage
Links:
Lineage 18.1 XDA Thread
Official 6T Lineage Downloads
The phone should still be in TWRP at this point. You now need to copy Lineage to the phone. From TWRP's main menu choose install. Then navigate to your ROM .zip location and click on it. Then swipe to confirm flash.
Lineage will replace TWRP, so you need to reflash TWRP as well. Run the TWRP installer again. If it's not on the phone, just copy it over again real quick. On A/B devices ROMs get flashed to the opposite slot. Things like Gapps, Magisk, etc get flashed to the current slot. We need Lineage on both slots, so it must be flash again. Flashing it twice only needs to be done the first time as we need to get rid of OOS. For updates it just gets flashed once. After the TWRP installer has run, back out to the main menu, and choose reboot, then recovery:
Once back in TWRP flash Lineage again. From TWRP's main menu choose install. Then navigate to your ROM .zip location and click on it. Then swipe to confirm flash.
Now run the TWRP installer again. Back out to the main menu, and reboot to recovery.
4.Optional, Gapps
Links:
NikGapps <-- For Lineage 18.1 (Use the R Folders for Android 11. I recommend the "Core" version. I also tested Basic though if you want that level of Gapps. I strongly recommend you grab setup wizard out of the R Addons Folder, I used the regular setup wizard, not the pixel one.)
MindTheGapps <-- It's worth mentioning here Lineage recommends MindTheGapps for 18.1. Take your pick. I personally use NikGapps as I can use a "leaner" Gapps package.
Now that your phone is back in TWRP for the last time before booting up Lineage, it's time to install Gapps if you want them. This step is optional. Same as the other steps here, go to install, choose your OpenGapps package, Then navigate to your .zip location and click on it. Then swipe to confirm flash.
5. Very Optional, Magisk
These steps are very optional. However this is how I, root, pass safety net, and get a various apps to appear in the Play store.
Flash Magisk in TWRP. For Magisk 23, you now have to rename the Magisk.apk to Magisk.zip. Then flash it in TWRP. If you wanted to uninstall it, you rename it to uninstall.zip. If you already had an older version of Magisk installed, make sure you do not have it hidden / nenamed when installing Magisk 23 for the first time. Restore the original package before installing 23.
Magisk <-- Flash this right after Gapps.
These items are add-ons are flashed in Magisk after the first boot (Don't flash these in TWRP anymore):
MagiskHide Props Config
Busybox
To flash modules in Magisk press the puzzle piece icon. Then choose install from storage. Now just choose your addons. After flashing the icons it will have a reboot icon at the bottom. You can reboot or you can press back and flash another. After you are done reboot.
You will also need a Terminal Emulator. I personally use:
Terminal Emulator for Android
Once all these are installed the first step is setup Magisk. Under Magisk go to settings:
In version 20.4+ Magisk Hide is no longer on by default. So make sure the Magisk Hide, Hide Magisk from various forms of detection switch is flipped. Then press Hide Magisk Manager. This will bring up a box for you to choose a random name for the Magisk Manager, type whatever you want here. You can leave it Manager if you wish, but I typically change this.
Now open Magisk again. It will ask you to download it again, click ok, then manually open the app again as it says. Now we need to open Magisk hide. This is now under the shield icon, then click the arrow at the top:
These are the apps you don't want to know that you have root. Less is better. You can cause instability problems by just choosing everything. My general rule of thumb is, Google, steaming video, music, and payment apps get selected. In my experience if I come across an app that needs it and I didn't select it, I just clear cache and/or data and re-open the app and it works. There are some big multiplayer apps that ban hardware / people, so do your research (don't ask me, I don't play those games).
Next time to change the device fingerprint using MagiskHide Props Config Module. We do this using the terminal emulator. In the terminal emulator, type "su" to gain root privileges. Then type props to run the module:
Now it's just following the menus. Choose option 1 - Edit device finger print. (type 1, hit enter)
After this you will see a menu of devices. It doesn't matter what device you pick really. If you want apps / Google to think you have a OPPO or Samsung pick one of those Fingerprints. However there's a bit more to passing Safety-net than that. Since Google has changed how things work not all those fingerprints that used to work will work now. Also now you may get an error when you turn on the phone because of the security dates. The OP6T Android 10 fingerprint has no issues at this point, so use that if you want:
After choosing the fingerprint you want, it will ask you if you want to reboot. Choose yes. After rebooting, you may need to clear the cache from the play store for some apps to appear in it. You should now pass safety net. Check this in Magisk:
6. Very Optional, Ad Blocking with a Host File.
You can block many things with a hosts file, most popular would be ads. I've been use StevenBlack's host file which is a compilation of several hosts files. This is located on Github:
https://github.com/StevenBlack/hosts (Scroll down you'll see the options of what you can block)
Direct link to the hosts file I use. This will block Adware / Malware.
Unfortunately for quite some time now on this device you can no longer just use a root browser to swap the hosts file. The easiest way is to use TWRP.
First we have to make the hosts file. The hosts file must use unix / linux line endings. If you are using linux, don't worry about this, just create the file. If you are using Windows, the easiest thing to do is use Notepad++ (Free).
Notepad++ Downloads
Next one other caveat. The hosts file is quite large. I've never had much luck copy and pasting it from any other browser than Firefox (Windows or Linux), but however you get it into Notepad++ is not a big deal.
Once in you have the hosts file into Notepad++ go to Edit, EOL Conversion, and Choose Unix (LF).
Now save the file as "hosts" no ending. This does mean under file type you will need to change it to All File types *.*. Move this hosts file to your phone. Then reboot to recovery. From the main TWRP menu, choose mount. Then mount system:
Hit the back button and go to the advanced menu. Choose File Manager:
You will find your hosts file under /sdcard, wherever you placed it. In my case I placed it in a folder called ROMs. Once you locate it, press and hold it for a moment, and relase. Then choose copy file:
At this point you need to tell TWRP where you want to paste the hosts file. It belongs in the /etc folder. The only hic-cup here is depending on what you were doing in TWRP this could be (on this device) /system/etc or /system/system/etc (you will see similar folders to the image below if you are in the right place). Once you are there, press "paste?" button in the lower right corner:
After this just swipe to confirm:
You can now reboot the device, and your hosts file should now be in place. Your ad block should now be active for all apps as it's global for all connections.
7. Reboot to system.
Updating Lineage
1. Flash Lineage.
Reboot to recovery. You can use the advanced reboot menu, or Volume Down + Power while turning the phone on. Don't wipe anything. From TWRP's main menu choose install. Then navigate to your ROM .zip location and click on it. Then swipe to confirm flash.
Lineage will replace TWRP, so you need to reflash TWRP as well. Run the TWRP installer again. After the TWRP installer has run, back out to the main menu, and choose reboot, then recovery:
2. Optional, Gapps (if you installed them once you must continue to install them or do a clean install)
Links:
NikGapps
Now that your phone is back in TWRP for the last time before booting up Lineage, it's time to install Gapps if you want them. This step is optional. Same as the other steps here, go to install, choose your OpenGapps package, Then navigate to your .zip location and click on it. Then swipe to confirm flash.
3. Reboot to system.
Last updatedSince I don't want people to have to wonder if these instructions are current, I am going to periodically test and update this post with my results. Please note I'm testing with a 6T, TMobile 6Ts are different. You can generally assume previous versions of LOS and OOS were also tested, but if you are unsure feel free to ask in this thread.
Last tested with:
OOS 10.3.7 and LOS 17.1 12-31 with TWRP 3.4.0-2
OOS 10.3.11 and LOS 18.1 05-27 with TWRP 3.5.2_9-0
This method has also been tested with:
OOS 10.3.3 and Omnirom 5-24 MicroG and Omnirom 5-24.
Cliff Notes
*TWRP 3.5.0_9-0+ Must be used with LOS 18 / 18.1
- Backup everything to the PC, so you will need to copy all your data over.
- Sync all your accounts, etc.
- In TWRP format data. Reboot recovery (This step wipes the device, make sure you backed everything up!)
- Factory Reset. (This is the slider at the bottom, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else)
- Flash Lineage
- Flash TWRP Installer
- Reboot to Recovery
- Flash Lineage (This is only the first time, to get the AOSP rom on both slots, only do this for the first install)
- Flash TWRP Installer (This is only the first time, to get the AOSP rom on both slots, only do this for the first install)
- Reboot to Recovery (This is only the first time, to get the AOSP rom on both slots, only do this for the first install)
- Flash Gapps (Optional)
- Flash Magisk (Optional) (Remember for ver 22 the Magisk.apk gets renamed to Magisk.zip, can also be renamed to uninstall.zip for uninstalling)
- Reboot to System.
- Then you should be able to setup the device, copy everything back over. Restore your data.
After this you should be able to update Lineage as normal.
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Optional, but if you flashed them once you have to keep flashing them.)
- Flash Magisk. (Optional)
- Reboot to system.
- No loss of data, or anything.
Thanks for the guide, able to flash los 17.1 successfully.
How to go back to OOS?
Does anyone have a guide on how to go back to OOS after flashing Lineage according to Lineage's instructions?
fordjonathan said:
Does anyone have a guide on how to go back to OOS after flashing Lineage according to Lineage's instructions?
Click to expand...
Click to collapse
Back up your data, use Step 1 of these instructions. That will put OOS back on your phone.
MSM Tool, always my least favorite option, but always an option.
MSM Tools for Regular 6T (TMobile uses a different one)
installed 17.1!
OhioYJ said:
Installing Lineage...
Click to expand...
Click to collapse
Massive thanks for your instructions!
- at first, I tried upgrading from LOS 16.0 to LOS 17.1. I followed the instructions on the wiki, but it landed me in the qualcomm crashdump mode.
- after that I ran into your instructions, and tried to follow your update guide, but it didn't help (not very surprising I guess, but I haven't had much to lose at this point ).
- after that, I just followed your fresh install guide (i.e. flashing the fastboot room and starting from scratch), followed every step and it worked!
I wonder if it's worth updating lineage OS wiki and pointing to your instructions? There is bunch of people in this thread, who also bricked the phone into crashdump, so perhaps it could help to prevent it for someone else.
Updating to LOS 17.1 ?
Dasseem said:
Thanks for the guide, able to flash los 17.1 successfully.
Click to expand...
Click to collapse
Initially I had problems with updating LOS, so I returned to Stock. As more people attempted to install LOS, and this fine Original Poster "Ohio" offered such excellent, and detailed instructions, I have been running LOS 16 since February.
However, I have not updated it, since I have had Zero Issues.
But to clarify, you used this method to update to LOS 17.1 ?
- coming from LOS 16 - without first returning to a fast-boot ROM ?
Did you up-date GApps accordingly during this Flash ?
Thank You, in advance, for any assistance!
:good:
barguybrady said:
But to clarify, you used this method to update to LOS 17.1 ?
- coming from LOS 16 - without first returning to a fast-boot ROM ?
Click to expand...
Click to collapse
Hi, I updated my previous reply to make it a bit more clear!
Yep, I was on LOS 16. Haven't had any issues, but figured why not update if I'll have to do it eventually
So I downloaded 17.1 and used the wiki instructions, which messed the phone up
Ended up flashing fastboot rom and starting from scratch, flashed gapps and magisk according to OhioYJ's instruction and it worked.
Flashing method
barguybrady said:
But to clarify, you used this method to update to LOS 17.1 ?
- coming from LOS 16 - without first returning to a fast-boot ROM ?
Did you up-date GApps accordingly during this Flash ?
Thank You, in advance, for any assistance!
:good:
Click to expand...
Click to collapse
I was using carbon ROM previously, had to move to OOS latest for flashing the lineage 17.1, believe it needs to be done if you are coming from pie, people know better correct me if I am wrong here.
As Karlicoss mentioned, it's better to follow the method posted by Ohio.
OhioYJ said:
Cliff Notes Versions
Installing Lineage
- Install fastboot ROM boot it once. Just to make sure everything is good.
- Reboot to fastboot.
- Boot the image of TWRP.
- Run the TWRP installer, reboot to recovery
- You backed everything up right?
- Factory reset (This is the slider at the bottom in the wipe menu).
- Format data. (This is the button that says Format data in the wipe menu)
- Do NOT wipe cache, do not Wipe system, do NOT Wipe Dalvik / ART, do not add anything else, Just Factory Reset and Format Data. After doing those two Reboot to Recovery one more time. You must do this after formatting data.
- Now transfer Lineage and TWRP to your phone, Windows / Linux should see TWRP fine as a media device when plugged in.
- Install Lineage
- Run the TWRP Installer.
- Reboot to Recovery.
- Install Lineage (You need Lineage on both slots, so yes run it again)
- Run the TWRP Installer (yes again).
- Reboot to Recovery.
- Install Gapps if you want them.
- Install Magisk if you use Magisk. Do not install modules or other add ons at this point. Boot once and go through the setup and everything, then install your add-ons.
- Be aware the phone may restart once, then Lineage will start up and all will be good.
Updating Lineage
- Reboot to recovery
- Flash Lineage.
- Flash TWRP Installer
- Reboot to Recovery
- Flash Gapps. (Assuming you use them, if you installed them once you must continue to install them or do a clean install)
- Flash Magisk. (Optional If you use it)
- Reboot to system.
- No loss of data, or anything.
- No need to flash anything twice etc.
Click to expand...
Click to collapse
Updating failed for me, as it shows everything encripted once I reboot the second time to recovery on slot B...
badpanda said:
Updating failed for me, as it shows everything encripted once I reboot the second time to recovery on slot B...
Click to expand...
Click to collapse
Usually this means you didnt format data, or you are using an old version of TWRP. Did you do a clean install?
I just tried it on my phone, was running 4-12 build, using 3.3.1-32 TWRP, updated to the 4-14 build, using 4-14 Gapps (nano), everything went smoothly here.
OhioYJ said:
Usually this means you didnt format data, or you are using an old version of TWRP. Did you do a clean install?
I just tried it on my phone, was running 4-12 build, using 3.3.1-32 TWRP, updated to the 4-14 build, using 4-14 Gapps (nano), everything went smoothly here.
Click to expand...
Click to collapse
No, no clean install. Just wanted to update to today's newest build os.
bump...
Thanks a lot for your guide. Very helpfull.
I'm using it with /e/ rom.
installing android 10 roms
I followed exactly as it was written. Same issues arose for me. After the phone is off then turned on no LTE. It makes phone calls and also text stuff. HOWEVER when you take out and reinsert sim LTE is enable. What is the problom?????????
sickpoppy said:
I followed exactly as it was written. Same issues arose for me. After the phone is off then turned on no LTE. It makes phone calls and also text stuff. HOWEVER when you take out and reinsert sim LTE is enable. What is the problom?????????
Click to expand...
Click to collapse
Just cycling airplane mode doesnt work? This isn't a TMobile 6T is it? You are in Sim slot 1? You maybe better asking in the LOS thread, and provide log it not working and then it working when you reinsert it. Im not quite sure whats going on there.
OhioYJ said:
Usually this means you didnt format data, or you are using an old version of TWRP. Did you do a clean install?
I just tried it on my phone, was running 4-12 build, using 3.3.1-32 TWRP, updated to the 4-14 build, using 4-14 Gapps (nano), everything went smoothly here.
Click to expand...
Click to collapse
So this means you do have to always format data for every single update??
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
sickpoppy said:
I followed exactly as it was written. Same issues arose for me. After the phone is off then turned on no LTE. It makes phone calls and also text stuff. HOWEVER when you take out and reinsert sim LTE is enable. What is the problom?????????
Click to expand...
Click to collapse
Change your sim card to the other slot...
---------- Post added at 09:11 PM ---------- Previous post was at 09:07 PM ----------
@OhioYJ So for an update you boot to recovery flash LOS latest version then flash twrp again and then reboot to recovery second time then format data to possibly decript encrypted system and, transfer files both gapps and magisk to device and then install gapps and magisk, lastly just reboot to system?
reply
yes it is a tmobile but it was flashed to global. TWRP is the version you are using. downloaded the lastest ROM. Weird it finds LTE at first then like I said when then phone shuts off LTE doesnt work til I take sim out.
badpanda said:
So this means you do have to always format data for every single update??
Click to expand...
Click to collapse
No that would be ridiculous. Not necessary at all. You have something else going on, but I dont know what. My update procedure is exactly as listed on the OP, on two 6Ts, two different carriers.
sickpoppy said:
yes it is a tmobile but it was flashed to global. TWRP is the version you are using. downloaded the lastest ROM. Weird it finds LTE at first then like I said when then phone shuts off LTE doesnt work til I take sim out.
Click to expand...
Click to collapse
A TMobile "converted" to global does not equal a global 6T. Logs posted in the LOS thread, may help out other TMobile users? The TMobile 6Ts introduce all sorts of quirks, and Im afraid I dont have any experience with them, so hopefully another TMobile user will be able to help.
NOTICE: crDroid 7.x (Android 11) is now in maintenance-only release mode, and will probably be End-Of-Life'd soon.
I'll be merging monthly Android Security Bulletins from upstream as they're available, and pushing releases, but they're blind builds at this point and I don't have time to troubleshoot them any longer.
Please consider updating to crDroid 9.x (Android 13):
crDroid 9.x XDA thread - OP 6/6T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is built on top of LineageOS, and is designed to increase performance and reliability over stock Android for your device, while also attempting to bring you many of the best features in existence today.
Features
A quick glossary and primer on flashing & slots for A/B devices (like ours):
Spoiler: Show/Hide
- "Clean flash": Removing device protection & clearing user settings before installing a bootable system install zip (usually by either wiping or formatting data, see below).
- "Dirty flash": Flashing a ROM zip (usually upgrading to new version, sometimes just re-flashing the existing one) without wiping data or anything first.
- "Wipe data": Synonymous with "factory reset", accomplished from TWRP recovery by selecting "Wipe", then performing the "Slide to factory reset". Clears user data without erasing any partitions, removing encryption, or deleting contents of internal storage.
- "Format data": Formats the data partition itself, resets all file-based encryption keys, loses all contents of internal storage, and in fact deletes all "user 0" directories (this has some implications for internal storage before & after first boot).
- "User 0" directories are a series of directories that store userdata for the primary user, "Owner", and get created in various places throughout the filesystem on first system boot if they don't exist already. Anything you copy to "internal storage" while booted in recovery after "formatting data" will actually be copied to /data/media/ instead of /data/media/0/, and will become invisible to regular file browsing after first boot once the system has created /data/media/0, since the system will prefer to use that path for internal storage from then on (so you'll need a root file browser to delete things from /data/media, or just ADB sideload things instead of copying after formatting but before booting).
- "OTA package": Originally an abbreviation for "over the air", referring to how a software update could be delivered (as opposed to having to take your phone to a carrier's store for a firmware update via serial/USB connection). The common usage in Android circles is any installation zip file that actually includes a bootable system.
- Some partitions are duplicated (system, vendor, boot, and probably a couple others, but not data) and have a "slot A" & "slot B" copy.
- "Slot A" and "slot B" are absolute designations, but most installer zip scripts use the relative designations: "active" and "inactive". Whichever slot you're booted from currently is "active", and the other one is "inactive".
- Installing a zip file that's flagged as being an OTA package will 1) install the contents to the "inactive" slot, and then 2) flag the bootloader to switch which slot is considered "active" (and booted from) and "inactive" upon next reboot.
- The OxygenOS full OTA zip files and all custom ROM installer zip files are considered "OTA packages" and will trigger a slot switch on next boot after installation.
- You can install multiple OTA zip packages one after the other without rebooting in both the stock recovery and TWRP; they will all get installed into the correct partitions in the "inactive" slot, one on top of the other, and then it will swap active & inactive upon reboot.
- We don't use what are called "delta" updates, which can patch existing partitions by block or by file; we use full filesystem images. So for us, OTA zip packages are really just a bunch of partition filesystem image files all wrapped up into a "payload.bin" with some extra instructions & metadata/checksums, so when you flash a ROM, it overwrites entire partitions at a time instead of individual files or filesystem blocks within that partition. So if you've changed something in a partition like system that gets written as part of flashing an OTA zip, all your changes are gone. The only thing in the system partition afterward will be what was in the system.img that was included in the ROM zip payload.
- The partitions that crDroid, LineageOS, and most custom ROMs for OnePlus 6 & 6T install to when flashing are boot (contains recovery & kernel), dtbo, system, and vbmeta. Some ROMs (like Syberia) build the vendor partition from source instead of just trying to work with the existing OEM vendor partition, so they flash that one too when installing. So you definitely need to flash stock vendor before switching from Syberia or another source-built vendor ROM to one like Lineage or crDroid that uses prebuilt.
- "Prebuilt vendor" vs. "source-built" vendor partitions: when first trying to get a custom ROM working on a new device now that we have separate system & vendor partitions & Google's "Project Treble" is a thing, you'll often just leave the contents of the vendor partition alone, because that's where all the proprietary or device-specific stuff lives (manufacturer specific hardware drivers & interfaces, any DRM libraries, custom frameworks & selinux policies for talking to them), and you make a compatibility map of what framework versions you're compiling against in system and what vendor version they're compatible with or supersede or you overlay updated things that should replace stuff in the vendor partition and keep it in system_ext instead. But you're also limited in that if there are some things in vendor, you CAN'T work around it from the ROM side (like, OnePlus Camera working correctly). So often, once the basics are functioning, the goal is to move to building the contents of the vendor partition from source, because you then have the freedom to fix problems with sepolicy, library/framework mismatches, etc. and make things work with the custom ROM instead of only working with the OEM's flavor of Android, and you can still copy individual pre-compiled files from the stock vendor filesystem image if needed (like if there's no open-source equivalent for some driver). Unfortunately, OnePlus SDM845 (enchilada & fajita, the OP6 & OP6T) never got a proper source-built vendor bringup by the LineageOS team (upon which crDroid is based). And while Syberia has had source built vendor in Android 11 (possibly 10?), it was only done for enchilada and NOT fajita, it's not trivial to unroll & commonize what they've done to apply to other ROMs, and some of the proprietary files they keep are imported from other similar devices/similar chipsets rather than source-built (presumably because the OnePlus ones are modified in a weird way that the open-source components can't hook into, but still not ideal). So for fixing a lot of the issues we still face with lack of things working quite right, or hardware features not available in custom ROMs (especially compared to newer OnePlus devices like the 7, 8, or 9 series), we're kinda stuck, because you can't just implement it against the stock prebuilt vendor.
- "Updating firmware" simply means we're flashing updated contents from the manufacturer into all the OTHER partitions besides the ones that the ROM OTA zip touches. There are another dozen or more of those, besides system & boot, that the full OxygenOS OTA zip would normally write to when you install it. The contents of the system partition in custom ROMs for our device are generally built against a particular version of OxygenOS (mostly the contents of the OEM vendor partition), and we've recently had an entire major Android version update come through from OxygenOS. Some people are still on older firmware that is now dramatically different than what the current custom ROM was intended to deal with (that is, all the stuff from OxygenOS is still based on Android 10, while the ROM is expecting compatibility with Android 11), and while I tend to agree that OxygenOS 10 was better than the current state of OOS 11, that doesn't matter when you're talking about installing the custom ROM over it. So please, keep an eye out in the release notes for what the recommended/required firmware versions are, and remember to update (procedure below).
Notes on custom recoveries with OxygenOS 11 firmware:
Spoiler: Show/Hide
- My understanding (from people smarter than me) is that the android-11 tree of TWRP is kind of a mess at the moment. I had made some 3.6.0_11-0 unofficial builds for both enchilada & fajita, but now they don't even seem to boot and I don't know why. TWRP android-11 tree refuses to mount the system partition where it belongs, and so addon.d OTA survival scripts don't work correctly any longer (which means you're hosed if you use NikGapps and update while booted from a TWRP version ending in "11-0", or if you have Gapps installed as a module and forget to reboot recovery & re-flash Magisk after flashing an update from TWRP).
- Trying to `fastboot boot` an Android 9-based TWRP image (like official 3.5.2_9-0 twrp.img) after installing OxygenOS 11 doesn't work, and will drop you into Qualcomm Crash Dump mode. Don't try to flash it as your boot partion, either.
- Meanwhile, stock LineageOS-based recovery, for all its shortcomings, has working fastbootd (aka "Userspace fastboot", which is what happens when you go to "Advanced", then choose "Enter fastboot" and the background colors go from purple to orange) that lets you flash both slots at once and unlocks critical partitions, while the OnePlus OEM bootloader (where it says "Fastboot Mode" in a square, then goes to the big green "START" text over white & dark red terminal font type text) can't be used to flash every partition to update firmware. Personally, I still think of it as wannabe-class and not a "real" custom recovery until the Lineage team 1) implements userdata decryption so you can manage files in /data and install updates from internal storage, and 2) allows for a factory reset the way we've always all understood it ("wipe data") WITHOUT nuking the contents of internal storage for no good reason ("formatting data"). But since crDroid is LineageOS-based, it's what we've got, and fastbootd is the best way to update firmware.
- With all that being said, since it's likely TWRP will only get MORE broken with Android 12 looming large, we're officially only going to support the built-in LineageOS-based recovery & OTA updater moving forward, until things change dramatically. If you want to try different custom recoveries (new builds of TWRP, OrangeFox, PBRP, whatever), feel free; and let us know how it works! But you're on you're own doing that.
- And on the system update side, applying system OTA updates seems to work correctly using the built-in Updater tool (Settings > System > Updater) both with new OTA releases and when choosing a file from "Local Installation". It executes OTA survival scripts correctly from /system/addon.d/ as well. I've personally tested and it correctly preserved Magisk v23 canary and MindTheGapps & NikGapps (on tester fajita) and MinMicroG "system" install package on my daily driver enchilada.
- ...however it has an accidental dependency on Magisk, due to things beyond my control upstream in the ROM. Whoops. Won't work if you don't have Magisk installed.
- FLASHING the old official TWRP 3.5.2_9-0 INSTALLER zip (or newer) on top of OOS 11.x DOES seem to work for now, but you need to be in a recovery environment that allows you to flash that installer in the first place (either by booting into an already-installed TWRP recovery before updating firmware, or by having an Android 11 compatible recovery boot.img to be able to `fastboot boot`). I don't know if it'll keep working in Android 12 or with crDroid 8.
- Look, if you really want to stick with TWRP, I don't blame you. I made bootable Android 11 compatible TWRP images for enchilada & fajita back at 3.5.2, and they still work well enough to `fastboot boot` them and then flash the old official 3.5.2_9-0 installer zips. Look at the attachments at the end of post #2. Also, you may want to try one of Siddhesh's custom recoveries; they probably work even better.
- TL;DR: I prefer TWRP too but current official releases are kinda broken and it's a chore to get the old version installed correctly, so built-in LineageOS-based recovery and Updater app are the supported way to install & update moving forward.
Prerequisites:
- Make sure your bootloader is unlocked (and don't plan on relocking it ffs).
- Make sure you have a reasonably-current, working installation of android platform tools (adb & fastboot command line binaries & necessary drivers) on your computer, with a known-good USB cable (see links in post #2).
- Make sure you've downloaded the most recent full OxygenOS OTA installer zip (11.1.2.2), crDroid zip, matching crDroid boot.img, and whatever Magisk/GApps/microG installation packages you want to use to your computer (see links in post #2).
- Make sure you've backed up whatever data you want to keep to somewhere that's not on your phone; for a new install, we're going to format the data partition and you're going to lose everything from internal storage.
Let's get started!
Updating firmware:
- Reboot to bootloader (with no USB cable connected).
- If you're not already using the stock (LineageOS-based) recovery, you'll need to `fastboot flash boot path/to/boot.img`, substituting in the path & filename for the current crDroid boot.img that you downloaded as part of the prerequisites.
- Reboot to bootloader again (actually loads new bootloader that you just flashed).
- Use Vol +/- buttons to select "Recovery mode" and press Pwr button to boot stock recovery (white & purple on black color scheme, LineageOS logo in the middle).
- Tap "Advanced", then tap "Enter fastboot" (the already-selected first option), and color scheme should change from purple to orange.
- Follow the instructions for extracting the partition images from the official OxygenOS Updater full OTA zip you already downloaded using the "payload-dumper-go" utility, and flashing them one at a time, from https://wiki.lineageos.org/devices/fajita/fw_update, except for the very last command ("fastboot reboot").
- Since those instructions were updated for Android 12, and this is still Android 11-based & depends on using the OxygenOS prebuilt vendor partition contents, you'll also need to run fastboot flash --slot=all vendor vendor.img at the end of the list of commands in the linked LineageOS Wiki article above.
- If you're only updating firmware and were already on crDroid, you can just "fastboot reboot" which will go back to system. If this is part of coming to crDroid from another ROM, continue with the instructions below.
First time installing crDroid to your OP6T, coming from stock OxygenOS 11.x or another ROM (stock LOS-based recovery):
- Update to OxygenOS 11.1.2.2 firmware as described above if you haven't already.
- At the end of that procedure, (re)flash the crDroid boot.img to the `boot` partition of both slots, then reboot to recovery.
- Once you're rebooted into stock recovery (and lo, it was most purple), ADB sideload the crDroid installation zip. It might prompt you with "Install anyway?" on the phone, so don't just walk away from it.
- After the adb sideload has finished and the purple menu at the top comes back, hit the back arrow, then choose "Wipe data" (which WILL format internal storage -- you backed up as noted above, right?).
- Reboot to recovery (causes it to switch slots so any further installations will be on top of the slot that it just installed crDroid into).
- ADB sideload Magisk and/or any GApps packages you want to use. Please note that any time you install something via ADB sideloading, that the install file is technically renamed "sideload.zip" in transit by the ADB protocol, which might cause problems with installers that try to get too clever for their own good and alter behavior based on renaming the installation zip (like MinMicroG), so you might have to get even MORE clever with changing up installation order (like flash MinMicroG/GApps before Magisk so it won't install as a module. I dunno, talk to the package installer authors to get them to just build multiple packages or talk to the LineageOS devs to allow you to decrypt internal storage, copy stuff to internal storage via MTP, and install stuff from internal storage like a proper custom recovery (or at least maybe `adb push` to an unencrypted temp dir in the data partition).
- Reboot system.
- ???
- Profit!
OTA updating from Updater app with OOS 11.x firmware (recommended):
- This is the preferred way now. You just go to Settings > System > Updater, and... install an update. It processes addon.d OTA survival scripts correctly (tested with Magisk, MinMicroG, MindTheGapps, and NikGapps).
- Please note that there's currently an accidental depencency on Magisk being installed for this to work. I don't know if this will get fixed; that's definitely above my pay grade. This appears to have been fixed; huzzah!
- If you're trying to do a "Local Install" of the downloaded zip, please note you NEED to download on a computer & transfer to internal storage via USB cable; downloading files from an app on the phone associates it with a particular app thanks to Android 11+ Scoped Storage/SAF bull**** and will cause the file to be unreadable to the updater app process.
-- Old TWRP-based instructions below the fold (not recommended, but keeping for historical value... probably not accurate but I'm not going to update them more) --
Spoiler: Show/Hide
OTA updating from TWRP with OOS 11.x firmware:
You don't need to remove device protection; it works fine with PIN. Be sure you have a PIN set, or have looked up whatever that arcane chart of pattern > numeric incantations in case of pattern unlock. It's awful.
- Boot into TWRP recovery.
- Choose install, then select crDroid.zip, select additional zips, choose the TWRP installer zip, then slide to confirm flash.
- Reboot recovery.
- Choose install, then select Magisk zip (if using), select additional zips, choose GApps/microG (if using), slide to confirm flash.
- Please keep off of the grass, shine your shoes, wipe your... dalvik.
- Reboot system.
OTA updating from TWRP with OOS 10.x firmware:
- Don't. Update firmware to 11.1.2.2 first.
Reporting bugs:
I'm a parent of three young kids whose industry disappeared in the pandemic and is now full-time house husband & parent-in-charge while my wife is teaching full-time, I'm trying to save my small live-event-turned-streaming-studio company in my spare time. I'm doing in-home caregiving for a family member overnight one day a week. This is the back-up spare-spare-time hobby. I'm not a software developer nor do I know any programming languages, I just wanted a ROM with signature spoofing support and more customization than the unofficial microg-compatible LineageOS builds. So if there are bugs or feature requests, I go over to the crDroid dev chat and ask if someone has time to hold my hand & help. Don't make me get yelled for annoying them, mmkay? That said...
- Logs/screenshots/recordings or it didn't happen. Either the built-in Matlog app, or Syslog (free, open source, available on Play store and F-droid) are your friends here.
- I try to keep an organized notebook of roadmap, feature reqeusts, bug reports, etc. I won't always be able to fix it, but I'll at least look and do my best to ask the actual devs.
- I don't sign into XDA much, so if I haven't said anything, check out the Telegram group. Lots of helpful folks there.
- Please keep your questions in this thread instead of PMing me with them directly, so that the entire class can benefit from the discussion and you can find out if it's just you or if this is a widespread issue.
It's your device to use the way you want of course, and I use Magisk & microG and like to tweak things myself. But don't expect much support if you:
- didn't do a clean flash.
- aren't using the built-in kernel.
- are using extensive modifications (besides Magisk) like Xposed/Riru, Dolby Atmos, Viper4A, etc.
- immediately start using "finalize.zip" or flashing migrate restore zips instead of following the actual instructions.
- are running decrypted.
- re-locked your bootloader for some reason... you're on a custom ROM; don't do that.
crDroid Website - Download here!
Donate - Support development!
Telegram Oneplus6/6t group - Share your best cat pictures!
Source Code:
- Device tree: https://github.com/crdroidandroid/android_device_oneplus_fajita/tree/11.0
- OP6/6T Common device tree: https://github.com/crdroidandroid/android_device_oneplus_sdm845-common/tree/11.0
- hardware/oneplus/ HALs: https://github.com/crdroidandroid/android_hardware_oneplus/tree/11.0-op6
- Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sdm845/tree/11.0
Notes:
- crDroid 7.x (based on Android 11 & LineageOS 18.1) is no longer being actively developed, and I don't know how long someone on the dev team will keep merging monthly security updates. I'll try to keep building releases as long as there are updates, but all my limited time is focused on 9.x/Android 13 bringup now. We're in maintenance mode now, so any outstanding bugs are likely to just remain for perpetuity.
- Yes it supports package signature spoofing permission for microG compatibility out of the box (but will work without ANY GApps/microG implementation installed as well).
- Maintainer does not use GApps, so cannot answer questions about which packages work best from firsthand experience. In general, go with the smallest package you can and then install other Google apps from the Play Store. Please note that if you replace the stock dialer with Google Dialer, you may lose access to the Phone Info menu (*#*#4636#*#*) until you install another dialer. For recommendations, see https://wiki.lineageos.org/gapps.
- Requires OOS 11.1.2.2 firmware (last official release). You should consider using an Android 10 ROM if you want to continue using Android 10 firmware.
- Tested against latest Magisk 24 (with zygisk instead of magiskhide), works well.
- No there won't be official builds with inline GApps; please don't ask.
crDroid 7.30 - May 2023 ASB release notes/changelog:
Changelog since v7.29 official release:
- Merged May 2023 Android Security Bulletin from upstream.
- Whatever the ROM dev team changed upstream in LineageOS and crDroid sources (not much? they're busy with Android 13).
- No changes to device-specific files.
Known issues:
Fajita-specific:
- If you use App Lock and/or Face Unlock, you'll likely run into issues with the FOD circle view starting to flicker randomly into view when it shouldn't be there (like it's not dismissing properly because one part of the security handling is fighting with or doesn't notify the other part that it's done and doesn't need to try to accept a fingerprint any longer). As a knock-on effect, this will also cause "Disable Night Light when FOD is visible" to freak out. I have one person who doesn't use either report that they were getting the random FOD circle anyway, so... if you're having this problem, please make sure you've given MatLog permission to manage files so that it can actually save logs to internal storage and capture a logcat & send it to me. Logs or it didn't happen, etc etc.
Common:
- No f2fs-formatted userdata support, sadly. Doesn't work with the prebuilt vendor partition required for this version of Android. You'll need to reformat data to ext4 before being able to boot (you can fastboot flash the crDroid 8.x or 9.x boot.img if you need a recovery that will let you choose).
- Google Hotword recognition might be kinda broken right now (on more than one custom ROM/device, not just us), and may cause some screw-up that prevents microphone audio from being allowed to go anywhere else if it's enabled.
- If you are stuck at "Android is starting..." looping endlessly, then press power, reboot to bootloader, and follow the instructions for updating firmware to OxygenOS 11.1.2.2 in the first post. It doesn't wipe data, you shouldn't lose anything.
- Some screen-off gestures may not work, due to limitations beyond my control; don't use those gestures. Sorry.
Helpful links:
Download ROM
Android platform tools (adb & fastboot)
OxygenOS 11.1.2.2 Full OTA
Firmware update instructions (LineageOS Wiki)
(Please note that since crDroid 7.x/Android 11 for this device depends on the prebuilt OxygenOS vendor partition, you'll also need to add fastboot flash --slot=all vendor vendor.img to the list of commands in the instructions, just before the final fastboot reboot.
MSMTool (oh now you're in trouble - use latest unless you have a good reason to intentionally downgrade)
Magisk (use latest)
Official TWRP 3.5.2_9-0 install zip (good luck)
MaWalla99 said:
Download: coming soon!
Click to expand...
Click to collapse
will this work with verizon?
Tomkumato said:
will this work with verizon?
Click to expand...
Click to collapse
I don't know since I'm not in the US.
MaWalla99 said:
I don't know since I'm not in the US.
Click to expand...
Click to collapse
Thanks
hi dev thanks for this rom i have successfully installed now, so there is a small info i like to share, that is installing any version of nikgapps apart from core nikgapps will result in bootloop or after even format the data, rom will boot but set up screen says it crashed, so i have installed with core version of nikgapps, rom booted successfully. that's all i have info to share now.
Hi dev ROM is working fantastically after installed all the application I used before, so thanks for it, it has enough customization thanks for it too.
Does NOT work on Verizon.
Hi devs i don't know the reason why this happening, the problem is when i change default launcher to nova launcher system ui automatically crashes, i can't specifically pinpoint the reason, but after launching the Paytm app for first time then paytm also crashed so i don't know what to do now. I have attached logcat from matlog so I think I have captured required info.
Thanks for the ROM. Where is the best place to get A11 gapps?
wangdak said:
Thanks for the ROM. Where is the best place to get A11 gapps?
Click to expand...
Click to collapse
nik gapps
hi all,
I'm on fajita with crdroid 5.11 - Android 9.
i'd like to bump up to this thread's version. any tips for how to go about that - step by step?
I assume it would be something like -- update TWRP, update firmware, then flash rom as usual with instructions in first post?
many thanks
autologic said:
hi all,
I'm on fajita with crdroid 5.11 - Android 9.
i'd like to bump up to this thread's version. any tips for how to go about that - step by step?
I assume it would be something like -- update TWRP, update firmware, then flash rom as usual with instructions in first post?
many thanks
Click to expand...
Click to collapse
1 - remove any passwords used to unlock screens - 2 - Backup all your important data, - 3 - Make sure you're on latest TWRP for Fajita and that you have latest OOS firmware, Gapps, TWRP installer and the ROM you want to install (zip files) copied to your "Downloads " directory, then reboot into recovery mode, - 4 - make sure you're on slot A (tap "reboot", tap slot "A" and reboot to recovery again), 5 - tap "Wipe", "advanced wipe" and select " Dalvick Art/Cache", " data" and "system", - 6 - swipe to wipe, 7 - tap "install" and select OOS, then swipe to install, 8 - install TWRP zip file, 9 - reboot to recovery, - 10 - install OOS on the second slot, 11- install TWRP, 12 - reboot to recovery, 13 - install the new ROM, 14 - tap "Wipe", advanced Wipe", "Dalvick Art/Cache" and "Data", 15 - swipe to wipe, 16 - install TWRP and reboot to recovery, 17 - install GAPPS, - wipe " Dalvick Art/Cache and reboot to system. That's it!
autologic said:
hi all,
I'm on fajita with crdroid 5.11 - Android 9.
i'd like to bump up to this thread's version. any tips for how to go about that - step by step?
I assume it would be something like -- update TWRP, update firmware, then flash rom as usual with instructions in first post?
many thanks
Click to expand...
Click to collapse
Boot in latest TWRP
Flash latest OOS 10
Flash CR Droid Zip
Flash Finalize.zip
Flash latest TWRP
Format data -type Yes to confirm
Reboot to recovery
Flash Gapps & Magisk (Optional)
Coming from a different version of Android, format data is recommended. Backup your data before you do this
Hi LiveDisplay color profile doesn't work ,setting a profile ,once you exit it resets back to normal again
Excellent ROM.
Thanks!
Hi dev i attached a video, in which i try to explain a problem, i can't pinpoint say amazon app only having this kind of problem, but i can say irresponsible of which app suddenly ui will have some kind of problem, it will appear from nowhere after that phone will hang and i need to restart the phone or else battery drains very fast. Kindly look into it. I reinstalled the rom two time freshly, even though it having same kind of problem presist, but i really loved one good feature that is finger print working fantastic even after reboot. OS is not crashing and reboot by itself, app also not crashing but suddenly some part is acting wired. Anyway i will upload the video for proof. I have attached gif file as per xda rules.
I have one last idea in my head instead of using app called migrate to take back up of application installed in my phone and restore to newly installed rom. Better use play store to install all app one by one and see there is any difference, i really love this rom thats why i reinstalling freshly again and again to see any difference possible
I've never used micro g a whole lot in the past but I'm all for it now due to the unbelievable amount of permissions apps ask for and while I love Android I'm no Google person either. I flashed 7.2 CrDroid two days ago and didn't install gapps. Then I went back in twrp and flashed micro g and fdroid from (stable) nano droid installer thread here on XDA. Going to read up more about micro g ..etc.. Op, if you are testing anything that has to do with this or anything feel free to msg me anytime. Ill run whatever through everything possible and gather logs if need be and send them to you properly. Thanks for this rom!! Great job!! Always loved CrDroid! Think i 1st used CrDroid back in 2013 or so. Fantastic rom!! My Screen time on 7.2 CrDroid.
flash713 said:
I've never used micro g a whole lot in the past but I'm all for it now due to the unbelievable amount of permissions apps ask for and while I love Android I'm no Google person either. I flashed 7.2 CrDroid two days ago and didn't install gapps. Then I went back in twrp and flashed micro g and fdroid from (stable) nano droid installer thread here on XDA. Going to read up more about micro g ..etc.. Op, if you are testing anything that has to do with this or anything feel free to msg me anytime. Ill run whatever through everything possible and gather logs if need be and send them to you properly. Thanks for this rom!! Great job!! Always loved CrDroid! Think i 1st used CrDroid back in 2013 or so. Fantastic rom!! My Screen time on 7.2 CrDroid.
Click to expand...
Click to collapse
Yeah I feel you I'm right where you are I think it's time to ditch Google and get a similar setup. Wonder if there's a thread in the 6t section yet? Google still my friend she'll teach me how to set it up, lol
NOTICE: crDroid 7.x (Android 11) is now in maintenance-only release mode, and will probably be End-Of-Life'd soon.
I'll be merging monthly Android Security Bulletins from upstream as they're available, and pushing releases, but they're blind builds at this point and I don't have time to troubleshoot them any longer.
Please consider updating to crDroid 9.x (Android 13):
crDroid 9.x XDA thread - OP 6/6T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is built on top of LineageOS, and is designed to increase performance and reliability over stock Android for your device, while also attempting to bring you many of the best features in existence today.
Features
A quick glossary and primer on flashing & slots for A/B devices (like ours):
Spoiler: Show/Hide
- "Clean flash": Removing device protection & clearing user settings before installing a bootable system install zip (usually by either wiping or formatting data, see below).
- "Dirty flash": Flashing a ROM zip (usually upgrading to new version, sometimes just re-flashing the existing one) without wiping data or anything first.
- "Wipe data": Synonymous with "factory reset", accomplished from TWRP recovery by selecting "Wipe", then performing the "Slide to factory reset". Clears user data without erasing any partitions, removing encryption, or deleting contents of internal storage.
- "Format data": Formats the data partition itself, resets all file-based encryption keys, loses all contents of internal storage, and in fact deletes all "user 0" directories (this has some implications for internal storage before & after first boot).
- "User 0" directories are a series of directories that store userdata for the primary user, "Owner", and get created in various places throughout the filesystem on first system boot if they don't exist already. Anything you copy to "internal storage" while booted in recovery after "formatting data" will actually be copied to /data/media/ instead of /data/media/0/, and will become invisible to regular file browsing after first boot once the system has created /data/media/0, since the system will prefer to use that path for internal storage from then on (so you'll need a root file browser to delete things from /data/media, or just ADB sideload things instead of copying after formatting but before booting).
- "OTA package": Originally an abbreviation for "over the air", referring to how a software update could be delivered (as opposed to having to take your phone to a carrier's store for a firmware update via serial/USB connection). The common usage in Android circles is any installation zip file that actually includes a bootable system.
- Some partitions are duplicated (system, vendor, boot, and probably a couple others, but not data) and have a "slot A" & "slot B" copy.
- "Slot A" and "slot B" are absolute designations, but most installer zip scripts use the relative designations: "active" and "inactive". Whichever slot you're booted from currently is "active", and the other one is "inactive".
- Installing a zip file that's flagged as being an OTA package will 1) install the contents to the "inactive" slot, and then 2) flag the bootloader to switch which slot is considered "active" (and booted from) and "inactive" upon next reboot.
- The OxygenOS full OTA zip files and all custom ROM installer zip files are considered "OTA packages" and will trigger a slot switch on next boot after installation.
- You can install multiple OTA zip packages one after the other without rebooting in both the stock recovery and TWRP; they will all get installed into the correct partitions in the "inactive" slot, one on top of the other, and then it will swap active & inactive upon reboot.
- We don't use what are called "delta" updates, which can patch existing partitions by block or by file; we use full filesystem images. So for us, OTA zip packages are really just a bunch of partition filesystem image files all wrapped up into a "payload.bin" with some extra instructions & metadata/checksums, so when you flash a ROM, it overwrites entire partitions at a time instead of individual files or filesystem blocks within that partition. So if you've changed something in a partition like system that gets written as part of flashing an OTA zip, all your changes are gone. The only thing in the system partition afterward will be what was in the system.img that was included in the ROM zip payload.
- The partitions that crDroid, LineageOS, and most custom ROMs for OnePlus 6 & 6T install to when flashing are boot (contains recovery & kernel), dtbo, system, and vbmeta. Some ROMs (like Syberia) build the vendor partition from source instead of just trying to work with the existing OEM vendor partition, so they flash that one too when installing. So you definitely need to flash stock vendor before switching from Syberia or another source-built vendor ROM to one like Lineage or crDroid that uses prebuilt.
- "Prebuilt vendor" vs. "source-built" vendor partitions: when first trying to get a custom ROM working on a new device now that we have separate system & vendor partitions & Google's "Project Treble" is a thing, you'll often just leave the contents of the vendor partition alone, because that's where all the proprietary or device-specific stuff lives (manufacturer specific hardware drivers & interfaces, any DRM libraries, custom frameworks & selinux policies for talking to them), and you make a compatibility map of what framework versions you're compiling against in system and what vendor version they're compatible with or supersede or you overlay updated things that should replace stuff in the vendor partition and keep it in system_ext instead. But you're also limited in that if there are some things in vendor, you CAN'T work around it from the ROM side (like, OnePlus Camera working correctly). So often, once the basics are functioning, the goal is to move to building the contents of the vendor partition from source, because you then have the freedom to fix problems with sepolicy, library/framework mismatches, etc. and make things work with the custom ROM instead of only working with the OEM's flavor of Android, and you can still copy individual pre-compiled files from the stock vendor filesystem image if needed (like if there's no open-source equivalent for some driver). Unfortunately, OnePlus SDM845 (enchilada & fajita, the OP6 & OP6T) never got a proper source-built vendor bringup by the LineageOS team (upon which crDroid is based). And while Syberia has had source built vendor in Android 11 (possibly 10?), it was only done for enchilada and NOT fajita, it's not trivial to unroll & commonize what they've done to apply to other ROMs, and some of the proprietary files they keep are imported from other similar devices/similar chipsets rather than source-built (presumably because the OnePlus ones are modified in a weird way that the open-source components can't hook into, but still not ideal). So for fixing a lot of the issues we still face with lack of things working quite right, or hardware features not available in custom ROMs (especially compared to newer OnePlus devices like the 7, 8, or 9 series), we're kinda stuck, because you can't just implement it against the stock prebuilt vendor.
- "Updating firmware" simply means we're flashing updated contents from the manufacturer into all the OTHER partitions besides the ones that the ROM OTA zip touches. There are another dozen or more of those, besides system & boot, that the full OxygenOS OTA zip would normally write to when you install it. The contents of the system partition in custom ROMs for our device are generally built against a particular version of OxygenOS (mostly the contents of the OEM vendor partition), and we've recently had an entire major Android version update come through from OxygenOS. Some people are still on older firmware that is now dramatically different than what the current custom ROM was intended to deal with (that is, all the stuff from OxygenOS is still based on Android 10, while the ROM is expecting compatibility with Android 11), and while I tend to agree that OxygenOS 10 was better than the current state of OOS 11, that doesn't matter when you're talking about installing the custom ROM over it. So please, keep an eye out in the release notes for what the recommended/required firmware versions are, and remember to update (procedure below).
Notes on custom recoveries with OxygenOS 11 firmware:
Spoiler: Show/Hide
- My understanding (from people smarter than me) is that the android-11 tree of TWRP is kind of a mess at the moment. I had made some 3.6.0_11-0 unofficial builds for both enchilada & fajita, but now they don't even seem to boot and I don't know why. TWRP android-11 tree refuses to mount the system partition where it belongs, and so addon.d OTA survival scripts don't work correctly any longer (which means you're hosed if you use NikGapps and update while booted from a TWRP version ending in "11-0", or if you have Gapps installed as a module and forget to reboot recovery & re-flash Magisk after flashing an update from TWRP).
- Trying to `fastboot boot` an Android 9-based TWRP image (like official 3.5.2_9-0 twrp.img) after installing OxygenOS 11 doesn't work, and will drop you into Qualcomm Crash Dump mode. Don't try to flash it as your boot partion, either.
- Meanwhile, stock LineageOS-based recovery, for all its shortcomings, has working fastbootd (aka "Userspace fastboot", which is what happens when you go to "Advanced", then choose "Enter fastboot" and the background colors go from purple to orange) that lets you flash both slots at once and unlocks critical partitions, while the OnePlus OEM bootloader (where it says "Fastboot Mode" in a square, then goes to the big green "START" text over white & dark red terminal font type text) can't be used to flash every partition to update firmware. Personally, I still think of it as wannabe-class and not a "real" custom recovery until the Lineage team 1) implements userdata decryption so you can manage files in /data and install updates from internal storage, and 2) allows for a factory reset the way we've always all understood it ("wipe data") WITHOUT nuking the contents of internal storage for no good reason ("formatting data"). But since crDroid is LineageOS-based, it's what we've got, and fastbootd is the best way to update firmware.
- With all that being said, since it's likely TWRP will only get MORE broken with Android 12 looming large, we're officially only going to support the built-in LineageOS-based recovery & OTA updater moving forward, until things change dramatically. If you want to try different custom recoveries (new builds of TWRP, OrangeFox, PBRP, whatever), feel free; and let us know how it works! But you're on you're own doing that.
- And on the system update side, applying system OTA updates seems to work correctly using the built-in Updater tool (Settings > System > Updater) both with new OTA releases and when choosing a file from "Local Installation". It executes OTA survival scripts correctly from /system/addon.d/ as well. I've personally tested and it correctly preserved Magisk v23 canary and MindTheGapps & NikGapps (on tester fajita) and MinMicroG "system" install package on my daily driver enchilada.
- ...however it has an accidental dependency on Magisk, due to things beyond my control upstream in the ROM. Whoops. Won't work if you don't have Magisk installed.
- FLASHING the old official TWRP 3.5.2_9-0 INSTALLER zip (or newer) on top of OOS 11.x DOES seem to work for now, but you need to be in a recovery environment that allows you to flash that installer in the first place (either by booting into an already-installed TWRP recovery before updating firmware, or by having an Android 11 compatible recovery boot.img to be able to `fastboot boot`). I don't know if it'll keep working in Android 12 or with crDroid 8.
- Look, if you really want to stick with TWRP, I don't blame you. I made bootable Android 11 compatible TWRP images for enchilada & fajita back at 3.5.2, and they still work well enough to `fastboot boot` them and then flash the old official 3.5.2_9-0 installer zips. Look at the attachments at the end of post #2. Also, you may want to try one of Siddhesh's custom recoveries; they probably work even better.
- TL;DR: I prefer TWRP too but current official releases are kinda broken and it's a chore to get the old version installed correctly, so built-in LineageOS-based recovery and Updater app are the supported way to install & update moving forward.
Prerequisites:
- Make sure your bootloader is unlocked (and don't plan on relocking it ffs).
- Make sure you have a reasonably-current, working installation of android platform tools (adb & fastboot command line binaries & necessary drivers) on your computer, with a known-good USB cable (see links in post #2).
- Make sure you've downloaded the most recent full OxygenOS OTA installer zip (11.1.2.2), crDroid zip, matching crDroid boot.img, and whatever Magisk/GApps/microG installation packages you want to use to your computer (see links in post #2).
- Make sure you've backed up whatever data you want to keep to somewhere that's not on your phone; for a new install, we're going to format the data partition and you're going to lose everything from internal storage.
Let's get started!
Updating firmware:
- Reboot to bootloader (no USB cable connected).
- If you're not already using the stock (LineageOS-based) recovery, you'll need to `fastboot flash boot path/to/boot.img`, substituting in the path & filename for the current crDroid boot.img that you downloaded as part of the prerequisites.
- Reboot to bootloader again (actually loads new bootloader that you just flashed).
- Use Vol +/- buttons to select "Recovery mode" and press Pwr button to boot stock recovery.
- Tap "Advanced", then tap "Enter fastboot" (the already-selected first option).
- Follow the instructions for extracting the partition images from the official OxygenOS Updater full OTA zip you already downloaded using the "payload-dumper-go" utility, and flashing them one at a time, from https://wiki.lineageos.org/devices/enchilada/fw_update, except for the very last command ("fastboot reboot").
- Since those instructions were updated for Android 12, and this is still Android 11-based & depends on using the OxygenOS prebuilt vendor partition contents, you'll also need to run fastboot flash --slot=all vendor vendor.img at the end of the list of commands in the linked LineageOS Wiki article above.
- If you're only updating firmware and were already on crDroid, you can just "fastboot reboot" which will go back to system. If this is part of coming to crDroid from another ROM, continue with the instructions below.
First time installing crDroid to your OP6, coming from stock OxygenOS 11.x or another ROM (stock LOS-based recovery):
- Update to OxygenOS 11.1.2.2 firmware as described above if you haven't already.
- At the end of that procedure, (re)flash the crDroid boot.img to the `boot` partition of both slots, then reboot to recovery.
- Once you're rebooted into stock recovery, ADB sideload the crDroid installation zip. It might prompt you with "Install anyway?" on the phone, so don't just walk away from it.
- After the adb sideload has finished and the purple menu at the top comes back, hit the back arrow, then choose "Wipe data" (which WILL format internal storage -- you backed up as noted above, right?).
- Reboot to recovery (causes it to switch slots so any further installations will be on top of the slot that it just installed crDroid into).
- ADB sideload Magisk and/or any GApps packages you want to use. Please note that any time you install something via ADB sideloading, that the install file is technically renamed "sideload.zip" in transit by the ADB protocol, which might cause problems with installers that try to get too clever for their own good and alter behavior based on renaming the installation zip (like MinMicroG), so you might have to get even MORE clever with changing up installation order (like flash MinMicroG/GApps before Magisk so it won't install as a module. I dunno, talk to the package installer authors to get them to just build multiple packages or talk to the LineageOS devs to allow you to decrypt internal storage, copy stuff to internal storage via MTP, and install stuff from internal storage like a proper custom recovery (or at least maybe `adb push` to an unencrypted temp dir in the data partition).
- Reboot system.
- ???
- Profit!
OTA updating from Updater app with OOS 11.x firmware (recommended):
- This is the preferred way now. You just go to Settings > System > Updater, and... install an update. It processes addon.d OTA survival scripts correctly (tested with Magisk, MinMicroG, MindTheGapps, and NikGapps).
- Please note that there's currently an accidental depencency on Magisk being installed for this to work. I don't know if this will get fixed; that's definitely above my pay grade. This appears to have been fixed; huzzah!
- If you're trying to do a "Local Install" of the downloaded zip, please note you NEED to download on a computer & transfer to internal storage via USB cable; downloading files from an app on the phone associates it with a particular app thanks to Android 11+ Scoped Storage/SAF bull**** and will cause the file to be unreadable to the updater app process.
-- Old TWRP-based instructions below the fold (not recommended, but keeping for historical value... probably not accurate but I'm not going to update them more) --
Spoiler: Show/Hide
OTA updating from TWRP with OOS 11.x firmware:
You don't need to remove device protection; it works fine with PIN. Be sure you have a PIN set, or have looked up whatever that arcane chart of pattern > numeric incantations in case of pattern unlock. It's awful.
- Boot into TWRP recovery.
- Choose install, then select crDroid.zip, select additional zips, choose the TWRP installer zip, then slide to confirm flash.
- Reboot recovery.
- Choose install, then select Magisk zip (if using), select additional zips, choose GApps/microG (if using), slide to confirm flash.
- Please keep off of the grass, shine your shoes, wipe your... dalvik.
- Reboot system.
OTA updating from TWRP with OOS 10.x firmware:
- Don't. Update firmware to 11.1.2.2 first.
Reporting bugs:
I'm a parent of three young kids whose industry disappeared in the pandemic and is now full-time house husband & parent-in-charge while my wife is teaching full-time, I'm trying to save my small live-event-turned-streaming-studio company in my spare time. I'm doing in-home caregiving for a family member overnight one day a week. This is the back-up spare-spare-time hobby. I'm not a software developer nor do I know any programming languages, I just wanted a ROM with signature spoofing support and more customization than the unofficial microg-compatible LineageOS builds. So if there are bugs or feature requests, I go over to the crDroid dev chat and ask if someone has time to hold my hand & help. Don't make me get yelled for annoying them, mmkay? That said...
- Logs/screenshots/recordings or it didn't happen. Either the built-in Matlog app, or Syslog (free, open source, available on Play store and F-droid) are your friends here.
- I try to keep an organized notebook of roadmap, feature reqeusts, bug reports, etc. I won't always be able to fix it, but I'll at least look and do my best to ask the actual devs.
- I don't sign into XDA much, so if I haven't said anything, check out the Telegram group. Lots of helpful folks there.
- Please keep your questions in this thread instead of PMing me with them directly, so that the entire class can benefit from the discussion and you can find out if it's just you or if this is a widespread issue.
It's your device to use the way you want of course, and I use Magisk & microG and like to tweak things myself. But don't expect much support if you:
- didn't do a clean flash.
- aren't using the built-in kernel.
- are using extensive modifications (besides Magisk) like Xposed/Riru, Dolby Atmos, Viper4A, etc.
- immediately start using "finalize.zip" or flashing migrate restore zips instead of following the actual instructions.
- are running decrypted.
- re-locked your bootloader for some reason... you're on a custom ROM; don't do that.
crDroid Website - Download here!
Donate - Support development!
Telegram Oneplus6/6t group - Share your best cat pictures!
Source Code:
- Device tree: https://github.com/crdroidandroid/android_device_oneplus_enchilada/tree/11.0
- OP6/6T Common device tree: https://github.com/crdroidandroid/android_device_oneplus_sdm845-common/tree/11.0
- hardware/oneplus/ HALs: https://github.com/crdroidandroid/android_hardware_oneplus/tree/11.0-op6
- Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sdm845/tree/11.0
Notes:
- crDroid 7.x (based on Android 11 & LineageOS 18.1) is no longer being actively developed, and I don't know how long someone on the dev team will keep merging monthly security updates. I'll try to keep building releases as long as there are updates, but all my limited time is focused on 9.x/Android 13 bringup now. We're in maintenance mode now, so any outstanding bugs are likely to just remain for perpetuity.
- Yes it supports package signature spoofing permission for microG compatibility out of the box (but will work without ANY GApps/microG implementation installed as well).
- Maintainer does not use GApps, so cannot answer questions about which packages work best from firsthand experience. In general, go with the smallest package you can and then install other Google apps from the Play Store. Please note that if you replace the stock dialer with Google Dialer, you may lose access to the Phone Info menu (*#*#4636#*#*) until you install another dialer. For recommendations, see https://wiki.lineageos.org/gapps.
- Requires OOS 11.1.2.2 firmware (last official release). You should consider using an Android 10 ROM if you want to continue using Android 10 firmware.
- Tested against latest Magisk 24 canary (with zygisk instead of magiskhide), works well.
- No there won't be official builds with inline GApps; please don't ask.
crDroid 7.30 - May 2023 ASB release notes/changelog:
Changelog since v7.29 official release:
- Merged May 2023 Android Security Bulletin from upstream.
- Whatever the ROM dev team changed upstream in LineageOS and crDroid sources (not much? they're busy with Android 13+).
- No changes to device-specific files.
Known issues:
- No f2fs-formatted userdata support, sadly. Doesn't work with the prebuilt vendor partition required for this version of Android. You'll need to reformat data to ext4 before being able to boot (you can fastboot flash the crDroid 8.x or 9.x boot.img if you need a recovery that will let you choose).
- Google Hotword recognition might be kinda broken right now (on more than one custom ROM/device, not just us), and may cause some screw-up that prevents microphone audio from being allowed to go anywhere else if it's enabled.
- If you are stuck at "Android is starting..." looping endlessly, then press power, reboot to bootloader, and follow the instructions for updating firmware to OxygenOS 11.1.2.2 in the first post. It doesn't wipe data, you shouldn't lose anything.
- Some screen-off gestures may not work, due to limitations beyond my control; don't use those gestures. Sorry.
Helpful links:
Download ROM
Android platform tools (adb & fastboot)
OxygenOS 11.1.2.2 Full OTA
Firmware update instructions (LineageOS Wiki)
(Please note that since crDroid 7.x/Android 11 for this device depends on the prebuilt OxygenOS vendor partition, you'll also need to add fastboot flash --slot=all vendor vendor.img to the list of commands in the instructions, just before the final fastboot reboot.
MSMTool (oh now you're in trouble - use latest unless you have a good reason to intentionally downgrade)
Magisk (use latest)
Official TWRP 3.5.2_9-0 install zip (good luck)
Looking forward on this one, thank you for the effort!
Hopefully android auto and face unlock are working. Thanks in advance.
gray_wolf said:
Hopefully android auto and face unlock are working. Thanks in advance.
Click to expand...
Click to collapse
Can't say anything about Android Auto, but Face Unlock works just fine!
MaWalla99 said:
Can't say anything about Android Auto, but Face Unlock works just fine!
Click to expand...
Click to collapse
Great, will test and report about the android auto and overall Rom. Thanks again.
DC dimming seems to be missing
Welcome back team with a11...even with initial build rom is so stable , like this rom simplicity with so many customisations thankyou
Screenshot ???
vindipi said:
Screenshot ???
Click to expand...
Click to collapse
This Rom has latest Android security patch of January and for screenshots open and scroll down this website
crDroid.net - increase performance and reliability over stock Android for your device
official crDroid ROM blog
crdroid.net
what gapps
DRAKOITYU said:
what gapps
Click to expand...
Click to collapse
I personally used nikgapps...may be all are compatible
gray_wolf said:
Hopefully android auto and face unlock are working. Thanks in advance.
Click to expand...
Click to collapse
After running the Rom for 5 days now I can confirm that it's very stable and has tons of customization. Unfortunately though android auto is not working. face unlocking, camera, etc works fine. Would appreciate it if you could fix the android auto issue in the future build.
Anyone else having issues with GPay? I'm using Magisk, hidden, and GPay still won't work.
Is it possible to update crDroid from 6.13 to 7.2 without data formatting (keeping application and data)?
MaWalla99 said:
Download ROM
TWRP (use 3.5.0 or higher)
Magisk (use 21.2 or higher)
Click to expand...
Click to collapse
Hey, I have the twrp-3.3.1-18-enchilada-Q-mauronofrio TWRP installed on my Oneplus 6, do I still need to upgrade it to the one which you are recommending? I'd rather go with the one that I currently have and not go through the hassle of updating the recovery. That being said, obviously you would know much better.
Please guide
TIA
mahroze said:
Hey, I have the twrp-3.3.1-18-enchilada-Q-mauronofrio TWRP installed on my Oneplus 6, do I still need to upgrade it to the one which you are recommending? I'd rather go with the one that I currently have and not go through the hassle of updating the recovery. That being said, obviously you would know much better.
Please guide
TIA
Click to expand...
Click to collapse
Twrp 3.3 should work fine with the rom. You can keep using it if you want to. However, there is no extra step to use 3.5 vs 3.3. You have to flash twrp after flashing the rom so you can upgrade to 3.5 by just flashing it instead of 3.3.
Quick questions, this rom have smart charging feature?
Firstly, I just want to say this is the most awesome ROM I've tried and i've sat here for a week trying every rom I could get find on the net. It's almost flawless... except for a few hugely killer problems that will sadly make this ROM unusable for me... even though I love it soooo much and if only these things worked... this would be the most amazing ROM ever.
1. After installing GPS doesn't work.
2. When I get a phonecall... I hear the ring... but nothing happens on the screen... so I can't pickup the call. I see after i got a missed call... but i can't answer calls when they're calling... even if I go to the homescreen from whatever app i was using when i got the call... click on the phone icon.... still nothing. Can't answer the call.
3. Text messages simply don't arrive. If I flash the rom back to stock Oxygen OS ... then the text message comes through. But it's a bit late when you're trying to get a verifiaction SMS sent to you to open an messanging app. Can't use the app because i can't get the verification SMS.
If these three things get fixed... omg this will literally be the best ROM ever.
There is a 4th issue... and for me it's important... but it's probably not any fault really of crDroid ROM to be fair...
Very surprisingly... and I just wanted to see if it would work.... kali nethunter for Oxygen OS which is for droid 10 installs over the top of this rom which is droid 11... to much surprise! ...and almost flawlessly... only issue is it doesn't recognise HID interface.
Man... with these 4 things working... this ROM together with nethunter would make for the most badass hacker pentester phone on the planet... save only for the exact same thing on a oneplus 7 or 8 pro.
Many thanks to the devs of this awesome ROM... who hopefully can get 1, 2, and 3 working in the not too distant future... pretty please?
4 is more of a hope and a prayer... but it would be soooo freaking awesome.
not_the_droid_ur_lookin4 said:
Firstly, I just want to say this is the most awesome ROM I've tried and i've sat here for a week trying every rom I could get find on the net. It's almost flawless... except for a few hugely killer problems that will sadly make this ROM unusable for me... even though I love it soooo much and if only these things worked... this would be the most amazing ROM ever.
1. After installing GPS doesn't work.
2. When I get a phonecall... I hear the ring... but nothing happens on the screen... so I can't pickup the call. I see after i got a missed call... but i can't answer calls when they're calling... even if I go to the homescreen from whatever app i was using when i got the call... click on the phone icon.... still nothing. Can't answer the call.
3. Text messages simply don't arrive. If I flash the rom back to stock Oxygen OS ... then the text message comes through. But it's a bit late when you're trying to get a verifiaction SMS sent to you to open an messanging app. Can't use the app because i can't get the verification SMS.
If these three things get fixed... omg this will literally be the best ROM ever.
There is a 4th issue... and for me it's important... but it's probably not any fault really of crDroid ROM to be fair...
Very surprisingly... and I just wanted to see if it would work.... kali nethunter for Oxygen OS which is for droid 10 installs over the top of this rom which is droid 11... to much surprise! ...and almost flawlessly... only issue is it doesn't recognise HID interface.
Man... with these 4 things working... this ROM together with nethunter would make for the most badass hacker pentester phone on the planet... save only for the exact same thing on a oneplus 7 or 8 pro.
Many thanks to the devs of this awesome ROM... who hopefully can get 1, 2, and 3 working in the not too distant future... pretty please?
4 is more of a hope and a prayer... but it would be soooo freaking awesome.
Click to expand...
Click to collapse
You have been positing this in more than one thread. This has nothing to do with any rom, and is related to what you are doing with your phone or the phone itself. Telephony is flowless on every Android 11 custom rom for Oneplus 6. And so is GPS, which literally connects in seconds.
First thing you should do is: disable wifi calling, because if your provider doesn't have the feature (or you are not provisioned for it), that could cause your problems. Next, uninstall any mode you might have. Try calling without Gapps.
Also, if you ever used Syberia Rom, you got custom /vendor, which would not work with other custom roms that use stock /vendor. So, you need to re-flash full stock rom onto both slots, which is a pre-requisite for flashing most custom roms. Then follow directions for installing a custom rom.