Rooting S9 on ANDROID 10 STABLE - Samsung Galaxy S9 Guides, News, & Discussion

Is it possible to root s9 on android 10 just like android pie with twrp fully working? If yes, then please reply...

Yes, I'm on android 10 rooted and twrp

danlivesey said:
Yes, I'm on android 10 rooted and twrp
Click to expand...
Click to collapse
how to?

How did you made it?

Nothing different as with Android P,
1. boot unlocked
2. installed twrp with odin.
3.Instantly restart in twrp after installing.
4. install magisk
works normal

Hi,
i cannot get my phone to reboot once twrp is installed.
Got any clue?
Thanks

Is there any procedure that properly roots Android 10 stable without leading to an infinite bootloop?

I am able to root but biometric stopped working.
Not sure how to fix that
---------- Post added at 08:26 PM ---------- Previous post was at 08:03 PM ----------
I am able to root but biometric stopped working.
Not sure how to fix that

Could you describe the process you followed for rooting?

g-gett said:
Hi,
i cannot get my phone to reboot once twrp is installed.
Got any clue?
Thanks
Click to expand...
Click to collapse
What device do you own?

it's a G960F
---------- Post added at 08:36 AM ---------- Previous post was at 08:24 AM ----------
TheMadScientist said:
What device do you own?
Click to expand...
Click to collapse
it's a G960F

Right, install twrp through odin, make sure you boot straight into twrp from download mode. Then wipe date and reboot recovery not the system. Then flash the multi disable zip from the download link. Then flash magisk and reboot. All done
https://drive.google.com/file/d/1TBp5hIrzIljYvOquI1H9L78YFtskxMDn/view?usp=drivesdk

So what if I already have twrp on my android 9 ,but now I wanna flash android 10

You got me there bud, My advice would to try a dirty flash to android 10 with Odin, but chances are you may need to flash twrp again not to sure.

Thanks, so what would I need to install twrp on my android 10(s9)

Just follow the instructions above with the link you need to flash that file after you flash twrp to stop the boot loop. Obviously you need Odin to flash twrp

Hi there does this work also for Andriod 10 latest UI2 on S9 ? Looking to root my S9 as well . Got it yesterday updated to the latest software . Tried to use it without root but too many apps that I use depends on it . Thanks

I have a Samsung G960f Singapore country, I want to use the Indonesian firmware base, can I do this?

febriasava said:
I have a Samsung G960f Singapore country, I want to use the Indonesian firmware base, can I do this?
Click to expand...
Click to collapse
You can do this as long as Indian firmware also labels as G960F. I am on Philippines and I'm using firmware from United Arab Emirates.

kyooohei08 said:
You can do this as long as Indian firmware also labels as G960F. I am on Philippines and I'm using firmware from United Arab Emirates.
Click to expand...
Click to collapse
must use g960f? or can it be g960fd or g960u or other?

Related

Rooting Honor 5C(NEM-L21) 7.0

Hello everyone, can someone advise me how can i ROOT my Honor 5C on official 7.0 Nougat update? Is there any options for rooting this OS and my NEM-L21? Can't flash latest TWRP too, help me please, any help will be appreciated...
theres no official twrp for enui 5, however theres unofficial twrp that works on emui 5 but it breaks sound completely.
thelous said:
theres no official twrp for enui 5, however theres unofficial twrp that works on emui 5 but it breaks sound completely.
Click to expand...
Click to collapse
Could you please give me the link where i can download unofficial twrp which breaks sound?
thelous said:
theres no official twrp for enui 5, however theres unofficial twrp that works on emui 5 but it breaks sound completely.
Click to expand...
Click to collapse
U are wrong. https://forum.xda-developers.com/showthread.php?p=72108639#post72108639 here in my post i give a link from p9 lite twrp for emui 5.0 and root pacage.
cropp7 said:
U are wrong. https://forum.xda-developers.com/showthread.php?p=72108639#post72108639 here in my post i give a link from p9 lite twrp for emui 5.0 and root pacage.
Click to expand...
Click to collapse
if you flash backup your sound is gone.
Omg, i rooted finally, but the apps just do not asking for root access, what should i do?
I flashed my backup with TWRP, my sounds are still with me, i can listen to music and ****..
SCUZZY1337 said:
Omg, i rooted finally, but the apps just do not asking for root access, what should i do?
Click to expand...
Click to collapse
install supersu and busybox
I did, but still, apps won't ask for permission...
SCUZZY1337 said:
I flashed my backup with TWRP, my sounds are still with me, i can listen to music and ****..
Click to expand...
Click to collapse
You restored your backups with the P9 Lite unofficial TWRP and still got sound working ? Lucky you, I guess. Apparently the dev also had the issue.
See here : https://forum.xda-developers.com/showpost.php?p=72249589&postcount=109
Hope he'll fix it soon, or that Team Win will release an update for their official recovery.
wtf, the apps won't ask root permissions, what can i do?
SCUZZY1337 said:
wtf, the apps won't ask root permissions, what can i do?
Click to expand...
Click to collapse
cleary you flashed wrong supersu then and didnt root.
SCUZZY1337 said:
wtf, the apps won't ask root permissions, what can i do?
Click to expand...
Click to collapse
Did u flashed the superSu from the link that i pasted?
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
Zarou said:
You restored your backups with the P9 Lite unofficial TWRP and still got sound working ? Lucky you, I guess. Apparently the dev also had the issue.
See here : https://forum.xda-developers.com/showpost.php?p=72249589&postcount=109
Hope he'll fix it soon, or that Team Win will release an update for their official recovery.
Click to expand...
Click to collapse
I used the twrp that i posted and super su . And my sound was clearly and no lost. , I enabled an dts mode from build.prop. But i got issue with the software that my phone wont boot so i manged to roll it back to 6.0 but before that i used root with pleasure.
cropp7 said:
Did u flashed the superSu from the link that i pasted?
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
I used the twrp that i posted and super su . And my sound was clearly and no lost. , I enabled an dts mode from build.prop. But i got issue with the software that my phone wont boot so i manged to roll it back to 6.0 but before that i used root with pleasure.
Click to expand...
Click to collapse
i flashed supersu with the twrp which you sent here, ir works, but now apps wont ask root permissions...
SCUZZY1337 said:
i flashed supersu with the twrp which you sent here, ir works, but now apps wont ask root permissions...
Click to expand...
Click to collapse
Whitch apps. Root needed or regular? If root needed just make a full unroot from superSu apk. then root again. If regular go manualy at the perrmision from application tap in settings.
cropp7 said:
Whitch apps. Root needed or regular? If root needed just make a full unroot from superSu apk. then root again. If regular go manualy at the perrmision from application tap in settings.
Click to expand...
Click to collapse
everything is fine now.

[GUIDE] Root nokia 5 android 8.1

what you need:
-your Nokia 5 (TA-1053, NOT SURE WHITH OTHERS)
-A computer (i use windows 10, x64)
-internet
-read this guide few times
*you must run android 7x, if not, you must downgrade to 7*
-turn your phone to download mode by holding <volume +> and <power> buttons
*follow TUT. from @wolfyapl*
+read this if you dont know how the script works
https://forum.xda-developers.com/nokia-5/how-to/guide-temporary-unlock-bootloader-to-t3746947
+download the script here and excute "unlock bootloader.bat" ( remember to prepare md5 code)
https://forum.xda-developers.com/nokia-5/development/small-batch-script-to-manipulate-t3764411
-then download this new twrp http://bit.ly/2MzpnZN and rename to "recovery.img" then replace the file in the script folder
-run "twrp flashing.bat" and dont reboot from the script when it complete processing, you must hold <volume +> and <power> till the twrp shows up
-install the oreo update .zip here http://bit.ly/2BqIUY0 and dont reboot yet
-go to 3-dot, select magisk root then restart your phone
-install magisk manager
-you are all set!
!There is English language in TWRP setting menu!
Many Thanks
Thank you Bro it worked for me
Can I update after rooting?
Abirm said:
Can I update after rooting?
Click to expand...
Click to collapse
you can't, if you update the twrp will disappear and stuck in stock recovery
alwaysbest said:
you can't, if you update the twrp will disappear and stuck in stock recovery
Click to expand...
Click to collapse
Is any way to get OTA updates so that the root is preserved? Even if there TWRP will be broken, the main thing is to keep the root access.
Can i not downgrade my phone to android 7 and just unlock the bootloader? or is it necessary to downgrade it? i have nokia 5 android 8.1 btw..
alwaysbest said:
you can't, if you update the twrp will disappear and stuck in stock recovery
Click to expand...
Click to collapse
What should i do if im stuck in stock recovery bootloop?
What to do next.. HELP
@alwaysbest
I downgraded my android to 7.1, then unlocked the bootloader. Problem is how to run that twrp, i renamed it to recovery.img and copied it to the ADB file, is this correct? or should i just type the command "flash recovery recovery.img"? and after downloading the oreo update zip in the last part, in what file should i put it in?
thanks in advance to anyone who will reply
@Always best can you please make a short video on this ,it would be nice
hmm... is that oreo belongs to igors 4pda ?
---------- Post added at 06:11 AM ---------- Previous post was at 06:10 AM ----------
[/COLOR]
vineet09i said:
@Always best can you please make a short video on this, it would be nice
Click to expand...
Click to collapse
@alwaysbest please make a video
md5 i generate not workingik
unfortunately i am stuck at trying to unlock the bootloader. thw md5 i generate isn't working. Brings an error. i just downgraded today and can't find a way to make it work
Help?!
Hey!
If the Android Pie update rolls out and I update. Will it brick my phone? And if it bricks my phone, how can I update without to brick my phone?
Thanks
Khanmodx said:
unfortunately i am stuck at trying to unlock the bootloader. thw md5 i generate isn't working. Brings an error. i just downgraded today and can't find a way to make it work
Click to expand...
Click to collapse
I'll try it soon (tomorrow). I'll report you the result.
Greetings from Germany
BotoxNoob said:
I'll try it soon (tomorrow). I'll report you the result.
Greetings from Germany
Click to expand...
Click to collapse
Hey noob, i did try it and it worked. Its a temporary unlock so everytime you will need to be doing it before flashing any thing.
Thanks for the reply ^^
Khanmodx said:
Hey noob, i did try it and it worked. Its a temporary unlock so everytime you will need to be doing it before flashing any thing.
Click to expand...
Click to collapse
Thanks for the reply.
Works perfect for me!
Thank you guy!
Someone has proved this method with a TA-1044 Android 8.1 ?
Yes pls. Wich Android version Is that firmware? And... This guide steps are the same?
I'm new with Nokia Phones, always have Motorola
---------- Post added at 06:35 PM ---------- Previous post was at 06:35 PM ----------
BotoxNoob said:
Yes. But you need the TA-1044 NBO Rom. Do you want the link?
Click to expand...
Click to collapse
Yes pls. Wich Android version Is that firmware? And... This guide steps are the same?
I'm new with Nokia Phones, always have Motorola
BotoxNoob said:
Oh... I think, there's no .nbo rom for your Device. But let me search a bit.
Click to expand...
Click to collapse
I have a Nokia 5 TA-1044 Dual SIM with Android 8.1

Root for Android Pie?

Hi does can anyone give to me correct files for root my N950F on Android Pie stable...
Just need correct twrp and magisk...please
Poslano z mojega SM-N950F z uporabo Tapatalk
blinkt88 said:
Hi does can anyone give to me correct files for root my N950F on Android Pie stable...
Just need correct twrp and magisk...please
Poslano z mojega SM-N950F z uporabo Tapatalk
Click to expand...
Click to collapse
I'm looking for this too. Just flashed Official Pie, now looking for TWRP.
Hopefully TeamExy will have his custom ROM up today sometime.
---------- Post added at 04:25 PM ---------- Previous post was at 04:04 PM ----------
Tried to flash TWRP here https://forum.xda-developers.com/newreply.php?do=newreply&p=78727616
But it didnt work.
Do we need to wait for a TWRP for Pie?
Havent there been ROMs based on the Pie BETAs? Maybe i did something wrong
vinokirk said:
I'm looking for this too. Just flashed Official Pie, now looking for TWRP.
Hopefully TeamExy will have his custom ROM up today sometime.
---------- Post added at 04:25 PM ---------- Previous post was at 04:04 PM ----------
Tried to flash TWRP here https://forum.xda-developers.com/newreply.php?do=newreply&p=78727616
But it didnt work.
Do we need to wait for a TWRP for Pie?
Havent there been ROMs based on the Pie BETAs? Maybe i did something wrong
Click to expand...
Click to collapse
I solved it...
If you have N950F Duos like me its pretty easy to root on Android Pie
Just download latest TWRP 3.2.1.0 or newest and put TAR file in Odin make sure you have OEM enabled in developer options...after that flash TWRP but after phone goes black you need press VOL+ Bixby and Power or just Vol+ and Bixby you need be fast....when you in TWRP swipe to allow modifications...than go and flash Magisk 18.1 latest ZIP....you need it have on SDCARD before start anything...if you got any error like "cant mount data" you need go first to WIPE and there wipe data its ask to type YES this format your phone and delete internal storage....
Magisk work fine no problems and twrp to. Good luck.
If you need help tell me
Poslano z mojega SM-N950F z uporabo Tapatalk
KNOX
Does knox start counting on this method?
petrusrpenha said:
Does knox start counting on this method?
Click to expand...
Click to collapse
Yes once you install twrp/ root you'll trip Knox for good!(No going back! )
KNOX
BluePhnx said:
Yes once you install twrp/ root you'll trip Knox for good!(No going back! )
Click to expand...
Click to collapse
and the secure folder keeps running by stumbling on knox?
What stops running when you stumble into knox?
petrusrpenha said:
and the secure folder keeps running by stumbling on knox?
What stops running when you stumble into knox?
Click to expand...
Click to collapse
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
KNOX
BluePhnx said:
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
Click to expand...
Click to collapse
my note 8 is with android 9 and whenever I try to run twrp.img by odin the binary error. any solution to this?
I know here should not be the place for this but I have another question you can not activate dual speaker mode without root?
petrusrpenha said:
my note 8 is with android 9 and whenever I try to run twrp.img by odin the binary error. any solution to this?
I know here should not be the place for this but I have another question you can not activate dual speaker mode without root?
Click to expand...
Click to collapse
1. You'll need the latest tar file not the img file for Odin.
2. You'll need twrp recovery. Root don't know.
blinkt88 said:
I solved it...
If you have N950F Duos like me its pretty easy to root on Android Pie
Just download latest TWRP 3.2.1.0 or newest and put TAR file in Odin make sure you have OEM enabled in developer options...after that flash TWRP but after phone goes black you need press VOL+ Bixby and Power or just Vol+ and Bixby you need be fast....when you in TWRP swipe to allow modifications...than go and flash Magisk 18.1 latest ZIP....you need it have on SDCARD before start anything...if you got any error like "cant mount data" you need go first to WIPE and there wipe data its ask to type YES this format your phone and delete internal storage....
Magisk work fine no problems and twrp to. Good luck.
If you need help tell me
Poslano z mojega SM-N950F z uporabo Tapatalk
Click to expand...
Click to collapse
Can you please send us a link to the files for download? TIA
drumbeater79 said:
Can you please send us a link to the files for download? TIA
Click to expand...
Click to collapse
All files what you need is already here on XDA just download latest TWRP 3.2.3.0 and Odin 3.12.1 and latest magisk version 18.1(18100)
All procedure how root is the same as for Oreo
First put Magisk zip on sdcard
Than flash TWRP with Odin
After flashing boot into TWRP swipe to allow modification and flash Magisk...if you get error like "cant mount data" you need go to wipe and there wipe data but this wipe internal storage.
Thats all
Poslano z mojega SM-N950F z uporabo Tapatalk
BluePhnx said:
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
Click to expand...
Click to collapse
Hello,
I have tried in all possible ways to install samsung pay with Gear s3, having knox to 0x1.
Could you tell me the way you did it?
Thank you.
NeoKbm said:
Hello,
I have tried in all possible ways to install samsung pay with Gear s3, having knox to 0x1.
Could you tell me the way you did it?
Thank you.
Click to expand...
Click to collapse
I haven't done it myself but here is the link:
https://forum.xda-developers.com/galaxy-note-8/how-to/samsung-pay-root-gear-3-update-update-t3686307
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Oh you must have a Samsung Gear watch that supports Samsung pay.
BluePhnx said:
I haven't done it myself but here is the link:
https://forum.xda-developers.com/galaxy-note-8/how-to/samsung-pay-root-gear-3-update-update-t3686307
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Oh you must have a Samsung Gear watch that supports Samsung pay.
Click to expand...
Click to collapse
I'll try. If it works, I owe you a coffee (I'll pay with my watch )
petrusrpenha said:
my note 8 is with android 9 and whenever I try to run twrp.img by odin the binary error. any solution to this?
I know here should not be the place for this but I have another question you can not activate dual speaker mode without root?
Click to expand...
Click to collapse
Hi
I have the same problem that binary error gives me.
I already wait 2 weeks for the state to be removed: Prenormal and it still continues that I can do.
regards
Enviado desde mi SM-N950F mediante Tapatalk
What about encryption?
Is it possible to root the "note 8 pie" without loosing encryption?
If you have to wipe your data because of install TWRP and magisk, is it possible to encrypt the phone again with TWRP installed?
Thanks for information.....
Robert7x said:
Is it possible to root the "note 8 pie" without loosing encryption?
If you have to wipe your data because of install TWRP and magisk, is it possible to encrypt the phone again with TWRP installed?
Thanks for information.....
Click to expand...
Click to collapse
It's been a while since i last used TWRP. But, the removal.of encryption is needed.in order to access system partition and make modifications. You can re-encrypt using TWRP, But every time you access the recovery, you will need to enter the decrypt key.
BluePhnx said:
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
Click to expand...
Click to collapse
Abt samsung pay, my note 8 was rooted, do u mean that if i have samsung galaxy watch with my note 8, then my samsung pay could be come back to be function again? How?
OK, another try....
Is there anyone who has rootet a "Original Pie Rom Note8 SM-N950F" successfully without loosing encryption?
I don't really need to have TWRP installed on my device, i just only want to root my phone in original state and get encryption back.....
Is it possible and who was successfull?
boytempp said:
Abt samsung pay, my note 8 was rooted, do u mean that if i have samsung galaxy watch with my note 8, then my samsung pay could be come back to be function again? How?
Click to expand...
Click to collapse
BluePhnx said:
I haven't done it myself but here is the link:
https://forum.xda-developers.com/galaxy-note-8/how-to/samsung-pay-root-gear-3-update-update-t3686307
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Oh you must have a Samsung Gear watch that supports Samsung pay.
Click to expand...
Click to collapse
You'll have to have the watch and use the watch to pay for stuff.
Check the link.

TWRP 3.3.1-0923 for REDMI NOTE8 CN-wzsx150

Chinese wzsx team twrp for redmi note 8
Found in china weibo wzsx150 page.
This is not my work.
I just only sharing for redmi note 8 user.
Saying no bug found with this recovery in the original weibo post.
But backup data is highly recommended.
PS. This twrp come with Chinese and English language.
First time boot of twrp language was Chinese, so you need to change language to English in language setting.
Original post link:
https://www.weibo.com/u/6033736159?from=feed&loc=at&nick=wzsx150&is_hot=1
Download drive link:
https://drive.google.com/file/d/1ILbGSfQRxjIRzvu03cnoinBtZRVpDKz-/view
Update version of wzsx twrp chinese version
https://drive.google.com/file/d/1SQyCk6aOnQys5e4XXEHQLfUWqj0qDkBv/view?usp=sharing
Test and enjoy
Credit: wzsx team.
Anyone tried this twrp?
Any feedback?
The computer can boot but not flash.
The computer can boot but not flash.
ninety2 said:
The computer can boot but not flash.
Click to expand...
Click to collapse
https://c.mi.com/thread-1641393-1-0.html
Thank you for answer.
I already know how to install it. I tried the same thing. I don't know if it's a problem with 'global rom' or 'twrp'.:crying:
So you tried to install this twrp but not successful?
Yes.
Zozomon said:
So you tried to install this twrp but not successful?
Click to expand...
Click to collapse
I didn't succeed ...
---------- Post added at 11:36 AM ---------- Previous post was at 11:22 AM ----------
Uwai yan said:
https://c.mi.com/thread-1641393-1-0.html
Click to expand...
Click to collapse
The 'adb tool' had a problem. I tried again and installed it normally. Thank you.
---------- Post added at 11:51 AM ---------- Previous post was at 11:36 AM ----------
ninety2 said:
I didn't succeed ...
---------- Post added at 11:36 AM ---------- Previous post was at 11:22 AM ----------
The 'adb tool' had a problem. I tried again and installed it normally. Thank you.
Click to expand...
Click to collapse
It was run once, but not after that. I give up...
OK, I had successfully installed this twrp on China rom redmi note 8.
---------- Post added at 02:11 AM ---------- Previous post was at 01:45 AM ----------
Then I tried install Global rom thru twrp and when it reboot, it came to the new phone setup screen.
When setup to region there is only China option, no other country else.
So no choice have to choose China, it starts to hangs..."Find device has closed unexpectedly"...
Tried to flash back China rom and it keeps booting into twrp.
Update
Since it keep getting into Twrp,
I do factory reset and flashed global rom.
Now it is working in global rom but without twrp recovery.
I think this twrp is not for global rom.
If flashed it will keeps getting into recovery mode.
Need experts to verify.
Zozomon said:
Update
Since it keep getting into Twrp,
I do factory reset and flashed global rom.
Now it is working in global rom but without twrp recovery.
I think this twrp is not for global rom.
If flashed it will keeps getting into recovery mode.
Need experts to verify.
Click to expand...
Click to collapse
It wasn't a problem with my phone.
It seems that the twrp can only flash in 'china rom'.
I am also a 'global rom' but twrp doesn't flash.
https://www.youtube.com/watch?v=Bt8-dnB2zAk
Some Youtube tutorial for rmn8
Will it work with my Global version, which one to download, Jesus.
Not sure if it does
Flashing method?
Guys, feedback?
Update
it does not work on global rom. it is only for china rom
wolfxxxx said:
it does not work on global rom. it is only for china rom
Click to expand...
Click to collapse
Did you get bootloop at recovery too?
is this work's on variant Redmi Note 8 4/64 (GLOBAL ROM) .???
There is an updated version but I cannot access as I do not have account to save the file.
Zozomon said:
There is an updated version but I cannot access as I do not have account to save the file.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1SQyCk6aOnQys5e4XXEHQLfUWqj0qDkBv/view?usp=sharing
Update version of wzsx 150 chinese twrp ginkgo

[CLOSED]Delete

Deleted by MarvinMod
Do I needed to format data for this?
Can you install viper4android from xda labs on stock android 10 with magisk.
Install viper4android, reboot and recheck magisk to see if it still works.
Cuz for Android 9, the moment I install any magisk modules and reboot, the magisk breaks and I have only partial root access ( root access given to apps before still works but access to newer apps doesn't)
Also what do you mean by open stock recovery folder? You mean stock rom we download from samfirm
JakunTech1010 said:
Do I needed to format data for this?
Click to expand...
Click to collapse
yes, follow instructions exactly as written
fizzingbees said:
Can you install viper4android from xda labs on stock android 10 with magisk.
Install viper4android, reboot and recheck magisk to see if it still works.
Cuz for Android 9, the moment I install any magisk modules and reboot, the magisk breaks and I have only partial root access ( root access given to apps before still works but access to newer apps doesn't)
Also what do you mean by open stock recovery folder? You mean stock rom we download from samfirm
Click to expand...
Click to collapse
yes, when you download the stock rom from samfirm, it becomes a folder with your stock .tar.md5 files inside, that's your stock rom folder I speak of. I do not know if it works for 9. give it a try and let us know. I have 10 and once you update, you cant downgrade due to samsungs fuse set.
FYI, you can remove the .md5 from the stock rom files for faster loading but odin wont check the integrity of the file.
also, did you know that viper is Los based? other custom roms base off of Los so just replace Los in the guide with the rom of your choice. should work but I don't know, I only stick with Los or Stock.
A705MN
good morning friend I did all the steps you told me and it remains in the lineage logo I believe that the Roms you sent me is from an A705FN and my model is an A705MN that is why it does not configure because it stays in the logo and then it restarts me in twrp
jalexis30 said:
good morning friend I did all the steps you told me and it remains in the lineage logo I believe that the Roms you sent me is from an A705FN and my model is an A705MN that is why it does not configure because it stays in the logo and then it restarts me in twrp
Click to expand...
Click to collapse
my model is a705mn as it says in my signature below, your missing a step somewhere, did you format data properly? I flashed my device while writing the steps then again following the steps. also, I didn't post any stock roms and the los rom works with all a70 devices.
in twrp click wipe, then click format data and type yes and hit enter or the check on the keyboard.
when installing los, step 7 requires format data and step 9 requires format data so in the Los guide there will me format data done twice. these steps are for android 10 users, I have a guide for android 9 users that im transferring here but it will be some time. if your on android 9, pm me and ill link that guide to you, otherwise, try that format data or start from scratch by flashing the entire stock rom.
A705MN
sorry excuse my friend so much but in the step of formatting what should I do or could you give me the steps to follow and sorry for so much inconvenience
---------- Post added at 06:44 PM ---------- Previous post was at 06:36 PM ----------
friend and i'm in stock roms android 9 it will be that is why you don't configure the lineage it will be that you send me the android 9 guide
jalexis30 said:
sorry excuse my friend so much but in the step of formatting what should I do or could you give me the steps to follow and sorry for so much inconvenience
---------- Post added at 06:44 PM ---------- Previous post was at 06:36 PM ----------
friend and i'm in stock roms android 9 it will be that is why you don't configure the lineage it will be that you send me the android 9 guide
Click to expand...
Click to collapse
as long as you haven't done anything else trying to get it running(if you have, start from scratch by flahing the entire stock rom using odin) otherwise, boot to twrp, click wipe, click format data, type yes and hit the check box in lower right corner, reboot.
if your on 9, use this guide, its a bit outdated but as I said im working on it.
https://forum.xda-developers.com/showpost.php?p=81649149&postcount=151
also, what are you wanting, lineage os or stock os?
A705MN
friend thank you very much and I was able to install everything thank you very much for your contribution and time really that this xda group is the best there are many thanks
MarvinMod said:
yes, when you download the stock rom from samfirm, it becomes a folder with your stock .tar.md5 files inside, that's your stock rom folder I speak of. I do not know if it works for 9. give it a try and let us know. I have 10 and once you update, you cant downgrade due to samsungs fuse set.
FYI, you can remove the .md5 from the stock rom files for faster loading but odin wont check the integrity of the file.
also, did you know that viper is Los based? other custom roms base off of Los so just replace Los in the guide with the rom of your choice. should work but I don't know, I only stick with Los or Stock.
Click to expand...
Click to collapse
Viper4android is not a rom
It's a sound driver
It's magisk module.
What I meant is can you install this magisk model or download viper4android v2.7.6.1 from xda labs, install, reboot and check if magisk is still functional on stock Samsung Android 10 rom.
Also isn't android 10 and android 9 bootloader of Samsung rom same... V5 bootloader? Why would it mess with downgrading.?
fizzingbees said:
Viper4android is not a rom
It's a sound driver
It's magisk module.
What I meant is can you install this magisk model or download viper4android v2.7.6.1 from xda labs, install, reboot and check if magisk is still functional on stock Samsung Android 10 rom.
Also isn't android 10 and android 9 bootloader of Samsung rom same... V5 bootloader? Why would it mess with downgrading.?
Click to expand...
Click to collapse
Just assumed it was a rom, my apologies. I will check that for you when i have time but ive tested many modules with magisk and they work as well as magisk. Android 10 was an overhaul, not the same rom as 9 but still V5, however, thats not really the issue other then for twrp. Samsung devices has a fuse set, when a samsung devices bootloader is upgraded, the device trips or as we say "burns" out a fuse. The device can not be downgraded. After an update from 9 to 10, if you power off, hold both vol keys and plug into pc, in download mode at the top will tell you if a fuse has been triggered and provisioned. This means you cant go from 10 back to 9.
MarvinMod said:
Just assumed it was a rom, my apologies. I will check that for you when i have time but ive tested many modules with magisk and they work as well as magisk. Android 10 was an overhaul, not the same rom as 9 but still V5, however, thats not really the issue other then for twrp. Samsung devices has a fuse set, when a samsung devices bootloader is upgraded, the device trips or as we say "burns" out a fuse. The device can not be downgraded. After an update from 9 to 10, if you power off, hold both vol keys and plug into pc, in download mode at the top will tell you if a fuse has been triggered and provisioned. This means you cant go from 10 back to 9.
Click to expand...
Click to collapse
Thank you. Please do report back with viper4android. It's proper working with magisk is critical for me.
I understand your explanation about e-fuse.
But then that last android 10 upgrade that had this charging pcb issue, people did downgraded back successfully to Android 9 then.
How did they do that if e-fuse got triggered?
Lets leave this argument here.
I don't want to sidetrack you from your twrp and root work for Android 10.
Please tell me how to delete img files from the AP file
Or do I just need to replace img files with lz.4 files
fizzingbees said:
Thank you. Please do report back with viper4android. It's proper working with magisk is critical for me.
I understand your explanation about e-fuse.
But then that last android 10 upgrade that had this charging pcb issue, people did downgraded back successfully to Android 9 then.
How did they do that if e-fuse got triggered?
Lets leave this argument here.
I don't want to sidetrack you from your twrp and root work for Android 10.
Click to expand...
Click to collapse
No one with a galaxy A70 has updated to Android 10 stock and then went back to Android 9 stock. Viper worked fine and i kept root.
kissa67zwi said:
Please tell me how to delete img files from the AP file
Or do I just need to replace img files with lz.4 files
Click to expand...
Click to collapse
Extract the contents of AP file using peazip into a new folder on your desktop. Name the folder AP. Inside the new folder will be the files you need to delete or move out depending on what guide you following. When youve made the necessary changes, repack that new folder with peazip into a .TAR and now its flashable. Do not worry about the .lz4 extension. To delete, as long as its not zipped, right click the file, choose delete. To move the file, right click and hold, drag and drop to wherever and choose move here.
Fyi everyone, ill be making some youtube videos of the instructions for newbies by end of the week. It will have start to finish including bootloader unlock.
MarvinMod said:
Fyi everyone, ill be making some youtube videos of the instructions for newbies by end of the week. It will have start to finish including bootloader unlock.
Click to expand...
Click to collapse
That would be helpful for lot.
Kindly do link your videos here for us when they get uploaded
---------- Post added at 03:31 PM ---------- Previous post was at 03:31 PM ----------
MarvinMod said:
No one with a galaxy A70 has updated to Android 10 stock and then went back to Android 9 stock. Viper worked fine and i kept root.
Click to expand...
Click to collapse
Good to hear.
Thanks for trying and reporting back
According to your instructions, I will be able to use tvrp on the Android 10 stock?Rооt is a worker?
naruba said:
According to your instructions, I will be able to use tvrp on the Android 10 stock?Rооt is a worker?
Click to expand...
Click to collapse
no,youll be using twrp to root stock 10 this method allows you to keep root and use modules. twrp does not work with android 10 stock due to some changes in 10. it does however work with custom roms. you can either have twrp, custom rom and magisk root or have stock rom and magisk root.

Categories

Resources