No boot twrp ,no boot fastboot - Xiaomi Mi 8 Questions & Answers

hi, xiaom mi 8 as a result of my device turning off when throwing rom with twrp the phone only shows the Mi logo does not switch to twrp mode, fastboot mode does not just stop showing the Mi logo and showing again what should I do ?No boot twrp ,no boot fastboot just stay and repeat miu loggo

Furak07 said:
hi, xiaom mi 8 as a result of my device turning off when throwing rom with twrp the phone only shows the Mi logo does not switch to twrp mode, fastboot mode does not just stop showing the Mi logo and showing again what should I do ?No boot twrp ,no boot fastboot just stay and repeat miu loggo
Click to expand...
Click to collapse
Which TWRP were you using?

Press and hold the volume up and down, and power ( all at the same time.) The screen should then shut off.
Plus in usb cable to a usb2 port preferably on back of computer or if you only have usb 3 try using a usb hub, then go to control panel, system , device manager and look for port 9800 under com. is it there?
If so try using the flashall.bat method of restoring the phone with a stock fastboot rom.
The phone should restore each partition, and reboot to wifi/Micloud sign in. You will lose all data.

Related

Mi A2 BOOTLOOP can't get into Fastboot or Recovery

So i followed this guide to root my Mi A2 "theandroidsoul (insert dot here) com/xiaomi-mi-a2-root/"
It went all fine but the phone was still not rooted. So i thought maybe get the newest Magisk.zip wich i put on the phone.
So I went back to step 11. to install the new version with TWRP but it didnt go to TWRP although i held the volume up butten and then used the command "fastboot reboot" and then it weent into bootloop
so i Guess i am stuck on my Partition A (in my case) where i installed TWRP but i cant shut the phone dont to get into fastboot and ADB says Error: no device Found".
I Need Help plssss :crying:
If you cant go to fastboot then you need open up phone and use testpoint to force edl mode
But before that hold volume down and power for 10-15 sec to force fastboot
The battery is drained now, i tried to plug it in to the wall and boot into fastboot right away, i saw the fastboot screen for a splitsec but it cut off because it had not enough charge, so i left it plugged in and tried to go to fastboot constantly till the phone had enough charge to hold the boot, i was in fastboot for about 1 minute or so (my plan was to charge it in fastboot mode, leave it like that and then go to the pc to change the active partition back, but the pc didnt recognise the phone) but after that it startet bootlooping again while it was in fastboot.
Could i try to got to TWRP with "volume up + power button" ? and change the active partition in there?
Facing almost similar problem like you yesterday.
Try method I post here
https://forum.xda-developers.com/mi-a2/how-to/ota-v9-6-5-0-odimife-t3823445/page24
1. Have phone in fastboot mode
2. Launch adb cmd (NOT your pc usual cmd)
3. Connect to pc, type 'fastboot devices'

[Q] Xiaomi Mi 5X keeps vibrating every second & black screen!

My Xiaomi Mi 5X came with MIUI 9/Android 7.1. I tried to flash it with Mi flash tool.
Tissot_9.0_V10.0.10.0.PDHMIXM_Fastboot is the ROM I tried to flash.
However, something went wrong during the process. The flash tool status said flashing, but the phone began to vibrate every second. The screen is black, no indicator light or Mi logo. I cannot enter recovery mode or fastboot.
When I unplug it the vibration stops. When
charging the phone or
plugging it into the pc using USB cable or
trying the power on or
trying to enter recovery mode/fastboot
it begins to vibrate every second.
How can I fix this?
Flash latest fastboot rom with EDL test point.
if latest version do not work flash this version.
1.tiffany_images_V8.5.9.0.NDBCNED_20170810.0000.00_7.1_cn (can access fastboot, recovery and system boots but no display)
2.tiffany_images_V10.1.3.0.NDBCNFI_20181105.0000.00_7.1_cn ( when flashed with EDL booted into fastboot and recovery but bootloop. When I flashed same version using fastboot everything stopped working only white led blinks)
before flashing this 8.5.9 version i tried many other versions but only this version worked for me.
Now I can access fastboot, recovery and boot into system. Touch screen works but no display.(display is broken but worked before flashing tissot rom)
Why did you flash a Tissot fastboot rom?

Help with bootloop after twrp installation !!

hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Any help?
I can help you bro
softmaster3 said:
hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Click to expand...
Click to collapse
What was your MIUI Version before installing twrp. You will lose your data for the fix. But its the matter of phone or no phone.
softmaster3 said:
Any help?
Click to expand...
Click to collapse
You device was global varient or chinese varient ?
You can checkout tutorials on using SP Flash tool to flash stock firmware, or I can explain when I get home. Also use spflash tool with MTK auth bypass or you won't be able to flash.
Had a pretty bad month as I completely killed my phones software. Heck I even deleted the preloader which is the core responsible thing for a mediatek chip based phone to boot. BUT SP flash tool saved the day.
You hard-bricked your phone, there's a guide I've made on how to recover it here.
[GUIDE][UNBRICK] How unbrick your bootloop in MERLIN after flashing TWRP (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
If you try to flash the file misc.bin your device can be in bootloop forever, please follow this guide to fix it. It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Method 1: Once your device is on the black screen, plug it on USB (try...
forum.xda-developers.com

Question Redmi Note 11S bricked with no way out?

Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE

redmi 9c bootloop cant enter fastboot or recovery mode

my redmi 9c was rooted and everything was fine but one day i decided to install a custom rom so i did everything and the phone didnt boot normally it directed me to the recovery mode always which is PBRP i tried 3 custom roms with no effect so i decided to install the twrp recovery mode instead of PBRP while i was installing twrp from the fastboot after it finished the phone started to bootloob without being able to enter recovery mode or fastboot mode it just reboot over and over again it shows redmi logo then vibrates and reboots any help?
Force reboot into fastboot mode pressing volume down and power key together.
MHaseebpk said:
MHaseebpk said:
Force reboot into fastboot mode pressing volume down and power key together.
Click to expand...
Click to collapse
i tried but it just doesn't work i cant go to fastboot by this method it just keeps rebooting
Click to expand...
Click to collapse
It's simple.
Just unplug battery from circuit and plut it again after that don't turn on your phone and boot your phone into fastboot mode.
Now you can flash your phone with miflash tool or sp flash tool.

Categories

Resources