Is there any possible way to lock bands for lte cuz my carrier uses 5 different bands and this dumb os always chooses band 20 so the internet speed is terrible.My phone is rooted with last updates i've tried installing hidden network as a system app but it didn't work also the secret code 2263 is not working as my csc is xsg/tur.Anyone has any idea?Best regards.
Brightergk said:
Is there any possible way to lock bands for lte cuz my carrier uses 5 different bands and this dumb os always chooses band 20 so the internet speed is terrible.My phone is rooted with last updates i've tried installing hidden network as a system app but it didn't work also the secret code 2263 is not working as my csc is xsg/tur.Anyone has any idea?Best regards.
Click to expand...
Click to collapse
yes u can
1. Open quickshortcutmaker app
2. Goto call settings and then goto last call settings
3. Goto band selection by clicking 3 dots and now your favorite band is selected.
for help watch
nitinmits said:
yes u can
1. Open quickshortcutmaker app
2. Goto call settings and then goto last call settings
3. Goto band selection by clicking 3 dots and now your favorite band is selected.
for help watch
Click to expand...
Click to collapse
My friend thanks a lot but i am on android 9 and none of the solutins works with the last updates with this dumb os i am not able to update to android 10 yet cuz i need an imei repair to use my phone in my country but i don't have the box to do it. if you know a working solutions for android 9 with the last updates it will be fine for me.
Brightergk said:
My friend thanks a lot but i am on android 9 and none of the solutins works with the last updates with this dumb os i am not able to update to android 10 yet cuz i need an imei repair to use my phone in my country but i don't have the box to do it. if you know a working solutions for android 9 with the last updates it will be fine for me.
Click to expand...
Click to collapse
Why IMEI repair. Why you dont flash your country firmware through ODIN?
nitinmits said:
Why IMEI repair. Why you dont flash your country firmware through ODIN?
Click to expand...
Click to collapse
If i do that my phone will be blocked as soon as i turn
on my device because in my country you can't use phones from other countries directly you have to register them to the network but it cost almost a new phone so you take an imei of an old phone and paste it the new one because older one's imei has already been registered to the system but you need a box to make it and i don't have the box i need to go out to fix it in a local phone store but the virus scares me.i know It is so much complicated.
Also i tried your method as my phone is rooted there are only 4 sub options under call.You have to root the phone to make an imei repair.
nitinmits said:
Why IMEI repair. Why you dont flash your country firmware through ODIN?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Brightergk said:
Is there any possible way to lock bands for lte cuz my carrier uses 5 different bands and this dumb os always chooses band 20 so the internet speed is terrible.My phone is rooted with last updates i've tried installing hidden network as a system app but it didn't work also the secret code 2263 is not working as my csc is xsg/tur.Anyone has any idea?Best regards.
Click to expand...
Click to collapse
This app lets you lock 5G/LTE/4G/3G/2G bands on most Samsung phones running the latest One UI software (no root required!):
https://www.reddit.com/r/samsung/comments/g49ocr/app_samsung_band_selection_app/
Brightergk said:
If i do that my phone will be blocked as soon as i turn
on my device because in my country you can't use phones from other countries directly you have to register them to the network but it cost almost a new phone so you take an imei of an old phone and paste it the new one because older one's imei has already been registered to the system but you need a box to make it and i don't have the box i need to go out to fix it in a local phone store but the virus scares me.i know It is so much complicated.
Also i tried your method as my phone is rooted there are only 4 sub options under call.You have to root the phone to make an imei repair.
Click to expand...
Click to collapse
Sounds like your country is Pakistan ? Why not root it ? it ain't that you need Samsung pay or Secure folder or do you ?
N1NJATH3ORY said:
Sounds like your country is Pakistan ? Why not root it ? it ain't that you need Samsung pay or Secure folder or do you ?
Click to expand...
Click to collapse
Not Pakistan. In order to use my phone i need an imei repair otherwise i cant use it.It will be blocked by the provider.Because of the virus i still cant update my phone and be performed the imei repair.Do you know any other way i'll be happy to hear.
N1NJATH3ORY said:
Sounds like your country is Pakistan ? Why not root it ? it ain't that you need Samsung pay or Secure folder or do you ?
Click to expand...
Click to collapse
Not work with rooted note 9 running on android 9.
Brightergk said:
Not Pakistan. In order to use my phone i need an imei repair otherwise i cant use it.It will be blocked by the provider.Because of the virus i still cant update my phone and be performed the imei repair.Do you know any other way i'll be happy to hear.
Click to expand...
Click to collapse
See this link some info might be useful for you --> https://forum.xda-developers.com/galaxy-note-9/help/change-note-9-imei-t3966868
N1NJATH3ORY said:
See this link some info might be useful for you --> https://forum.xda-developers.com/galaxy-note-9/help/change-note-9-imei-t3966868
Click to expand...
Click to collapse
Thanks a lot mate i'll check it.
Related
hi guys ,
recently i had bought note5 (sm-n920f), to my dismay it was a rooted phone.i checked its ime (359523062717457) on the net and founded that it was samsung s6 after that i checked by app phoneinfo and founded that it was sm-n920v
now the real problem is that i want to basically update it to marshmallow...?? is it possible ...??
as there are certain feature that are not working as they should...
*private mode is not working
*having difficulty with network signals
*it always shows 4g no matter if i connect to 3g or 2g
*cant print (have installed plugin)
so basically can i update it to m.m...??
will it solve the problems....???
how can i update it....??
https://app.box.com/s/212mmmirwrtzhd9g1i1g9htgr0zpl9rx[/IMG]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
darkknight92 said:
hi guys ,
recently i had bought note5 (sm-n920f), to my dismay it was a rooted phone.i checked its ime (359523062717457) on the net and founded that it was samsung s6 after that i checked by app phoneinfo and founded that it was sm-n920v
now the real problem is that i want to basically update it to marshmallow...?? is it possible ...??
as there are certain feature that are not working as they should...
*private mode is not working
*having difficulty with network signals
*it always shows 4g no matter if i connect to 3g or 2g
*cant print (have installed plugin)
so basically can i update it to m.m...??
will it solve the problems....???
how can i update it....??
https://app.box.com/s/212mmmirwrtzhd9g1i1g9htgr0zpl9rx[/IMG]
Click to expand...
Click to collapse
Normally have difficulty to upgrade because of the mix variant. Just afraid you will softbrick it. But it's your call.
Sent from my SM-G925F
dear can u post from where can i get the required software...
darkknight92 said:
dear can u post from where can i get the required software...
Click to expand...
Click to collapse
You only needs smart switch or odin 3.xx. Google it.
Sent from my SM-G925F
Ok so I went ahead and rooted my phone via odin and now my phone says kernel is not seandroid enforcing. Any way I can fix this. I have the note 5 from tmobile
ninibobeanie said:
Ok so I went ahead and rooted my phone via odin and now my phone says kernel is not seandroid enforcing. Any way I can fix this. I have the note 5 from tmobile
Click to expand...
Click to collapse
It's showing that and not booting?. If you flash correct file for your android version & variant should be no problem.
Sent from my SM-G925F
Dear rosli one last thing before i do it what will be the most compatible firm ware for my note 5
PDA N920VVPU2A0J2
CSC N920 VVZW2A0J2
Baseband N920PVPU 2A016
Bootloader N920PVPU 2A016
Should i opt for sprint or verizon..???
darkknight92 said:
Dear rosli one last thing before i do it what will be the most compatible firm ware for my note 5
PDA N920VVPU2A0J2
CSC N920 VVZW2A0J2
Baseband N920PVPU 2A016
Bootloader N920PVPU 2A016
Should i opt for sprint or verizon..???
Click to expand...
Click to collapse
That's the problem. Your csc seems to be verizon but the baseband belongs to sprint. Have you tried smart switch?. Assuming your phone isn't refurbished(since you said the imei belongs to s6), ss will decide which is suitable for your phone.
Sent from my SM-G925F
Rosli59564 said:
That's the problem. Your csc seems to be verizon but the baseband belongs to sprint. Have you tried smart switch?. Assuming your phone isn't refurbished(since you said the imei belongs to s6), ss will decide which is suitable for your phone.
Sent from my SM-G925F
Click to expand...
Click to collapse
I have used smart switch...it says that
version installed : OFA(SPR)
& Had also tried to do a emergency software recovery theough smart switch but my mobile was not supported ...
I had also connected it to samsung kies but it was not supported tooo
darkknight92 said:
I have used smart switch...it says that
version installed : OFA(SPR)
& Had also tried to do a emergency software recovery theough smart switch but my mobile was not supported ...
I had also connected it to samsung kies but it was not supported tooo
Click to expand...
Click to collapse
Very risky and high chance to brick. As you said it's a combination of 920f, s6 and 920v. I have no idea.
Sent from my SM-G925F
Thanks for the ur time rosli.....
Hi darkknight92,
I'm experiencing the same issue as mentioned by you can you please share how to fix the same. You can mail me @Parik****[email protected]
Any option to enable native call recording without root on note 8
Not possible if you have a locked bootloader.
If your bootloader is unlocked you should be ok I did it before added the South Korean CSC on my Canadian phone .
Now if the bootloader is locked we need someone to take the Odin csc extract it add the recording line permission for all the CSCs and make sure to repack and resign it same as it was ( and good luck with that, no one sadly is interested because all what they think about is root "while some jobs wont allow you to root your phone" )
Yorgo1982 said:
Not possible if you have a locked bootloader.
If your bootloader is unlocked you should be ok I did it before added the South Korean CSC on my Canadian phone .
Now if the bootloader is locked we need someone to take the Odin csc extract it add the recording line permission for all the CSCs and make sure to repack and resign it same as it was ( and good luck with that, no one sadly is interested because all what they think about is root "while some jobs wont allow you to root your phone" )
Click to expand...
Click to collapse
In short its a dead end..
Now that we have snapdragon root, it is possible?
How do I enable it with root? ;p
DeeXii said:
How do I enable it with root? ;p
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=73883742&postcount=22
badblood_antony said:
Any option to enable native call recording without root on note 8
Click to expand...
Click to collapse
What does that mean?
On my Note8 the call recording feature can be enabled by default.
vndnguyen said:
What does that mean?
On my Note8 the call recording feature can be enabled by default.
Click to expand...
Click to collapse
Can you help me how you did that n what model ?
badblood_antony said:
Can you help me how you did that n what model ?
Click to expand...
Click to collapse
No need to do anything.
It is enabled by default.
The model is N950F/DS
vndnguyen said:
No need to do anything.
It is enabled by default.
The model is N950F/DS
Click to expand...
Click to collapse
Thats what i am not finding..Are you on custom rom ? What country are you in ? I cant see the option itself. Can u share a screenshot
vndnguyen said:
What does that mean?
On my Note8 the call recording feature can be enabled by default.
Click to expand...
Click to collapse
It may have been on yours but that doesn't mean all Note 8s have it enabled by default. It depends on the phone's original region as well as carrier. Tbe same model from a different region won't necessarily have the same features enabled.
Carriers have different enabled options that may be specific to them. If you get an unlocked (sim) version from Samsung in the US, you can use it on any US carrier but it will be missing carrier specific features. US sim unlocked version will actually have less features enabled.
I have a N950F from the UK. It did not originally have native call recording enabled either while other N950Fs do, but I do have it now.
shouren04 said:
It may have been on yours but that doesn't mean all Note 8s have it enabled by default. It depends on the phone's original region as well as carrier. Tbe same model from a different region won't necessarily have the same features enabled.
Carriers have different enabled options that may be specific to them. If you get an unlocked (sim) version from Samsung in the US, you can use it on any US carrier but it will be missing carrier specific features. US sim unlocked version will actually have less features enabled.
I have a N950F from the UK. It did not originally have native call recording enabled either while other N950Fs do, but I do have it now.
Click to expand...
Click to collapse
Any help how you have it now
badblood_antony said:
Any help how you have it now
Click to expand...
Click to collapse
Sorry to get your hopes up....
I have an Exynos, TWRP installed & rooted. After I installed Kalm_Traveler's modified TMO transformation mod it was turned on along with other tmobile features.
But the cscfeature that turns it on is:
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
In my case it's in others.xml. You would need root to add that line.
shouren04 said:
Sorry to get your hopes up....
I have an Exynos, TWRP installed & rooted. After I installed Kalm_Traveler's modified TMO transformation mod it was turned on along with other tmobile features.
But the cscfeature that turns it on is:
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
In my case it's in others.xml. You would need root to add that line.
Click to expand...
Click to collapse
Thats correct..i cannot root. So trying to send this line through adb
badblood_antony said:
Thats correct..i cannot root. So trying to send this line through adb
Click to expand...
Click to collapse
You would have to pull the file, edit it with the line, then send it back. I'm not for sure but I believe you would still need root to perform this.
badblood_antony said:
Thats correct..i cannot root. So trying to send this line through adb
Click to expand...
Click to collapse
did u find a way to set that line via ADB ??
What about to flash a stock firmware from other region/country i.e. China?, could it work?
Calvinx1 said:
What about to flash a stock firmware from other region/country i.e. China?, could it work?
Click to expand...
Click to collapse
Should work actually. Don't forget the CSC.
I understand this doesn't help out the question you asked but just wanted to throw some info out there. In the US to legally record a call you must have some sort of clearly audible noise repeat every 15 seconds such as a beep or tell the other party ahead of time you plan to record. If you use a service such as Google Voice that isn't truly a "phone call" since it uses data these laws do not apply.
badblood_antony said:
Thats what i am not finding..Are you on custom rom ? What country are you in ? I cant see the option itself. Can u share a screenshot
Click to expand...
Click to collapse
I have N950F/DS XXV, stock Rom, no root.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys,
After spending 4 hours trying to get the unlock code for the BTV-W09, including email and calling Huawei, I was able to do it.
Even though Huawei said that it cannot be done on the US model, it CAN.
You must use the chinese site https://emui.huawei.com/cn/plugin/unlock/detail.
The site will most likely not open for you, but i set my VPN to a china location and BAM, it works.
I was able to get the code first time.
*** If your getting the error for wrong information, make sure your tablet is running EMUI 4.1***
If not do this:
1. Verify your on EMUI 5.0, if not upgrade using built in tablet updater app.
2. Then flash http://download-c1.huawei.com/download/downloadCenter?downloadId=94469&version=380487&siteCode=ru
3. Once it reboots flash http://download-c1.huawei.com/download/downloadCenter?downloadId=94471&version=380540&siteCode=ru
4. Once it reboots and you finish the setup try getting the product code through Calculator by entering "()()1357946()()=" (must be in landscape mode)
Damn I wish I saw this yesterday before I spent hours trying to figure this out. In the end, I paid $4 for DC Unlocker. It worked.
Thanks for sharing!
Sent from my BTV-W09 using Tapatalk
filledtwinkie said:
Hey guys,
After spending 4 hours trying to get the unlock code for the BTV-W09, including email and calling Huawei, I was able to do it.
Even though Huawei said that it cannot be done on the US model, it CAN.
You must use the chinese site https://emui.huawei.com/cn/plugin/unlock/detail.
The site will most likely not open for you, but i set my VPN to a china location and BAM, it works.
I was able to get the code first time.
Click to expand...
Click to collapse
Is the site print in Chinese or English?
knotle said:
Is the site print in Chinese or English?
Click to expand...
Click to collapse
You have to do the Chinese Site.
filledtwinkie said:
You have to do the Chinese Site.
Click to expand...
Click to collapse
Hi
when i filled the information at chinese webpage. it still tell me the data is not corret.
would you help me? how get the correct information from mediapad m3 ?
my tablet is wifi version.
Model: BTV-W09
IMEI/SN: 28D6R17A21002913
product id : open calculator and enter ()()1357946()()=. An 8-digit ID will appear
i dont know which step i wrong..
Hi,
Could someone with Chinese VPN access help me out with getting my unlock code:
Model: BTV-W09
Serial: 28D6R17A21001753
Product ID: 75710544
I got the expected "check your information" problems on non-cn site, and N.A. support says that they won't give a code due to warranty issues.
BTW if it helps anyone, I found using downloading "PixelPhone Dialer & Contacts" seemed to be the only way to get to my Product ID (Dial *#*#1357946#*#*) since there is no ( or ) keys on my pre-installed calculator app.
Thanks
Turn your tablet into landscape mode to get ( ()) on the installed calculator
Too easy!
Now if only turning my browser sideways would let the Chinese site load....
filledtwinkie said:
You have to do the Chinese Site.
Click to expand...
Click to collapse
DVSGUY said:
Too easy!
Now if only turning my browser sideways would let the Chinese site load....
Click to expand...
Click to collapse
yap.. i use the same method to get the product id. but cn website still display the information is not corrent.. ><
Infinitlee said:
Hi
when i filled the information at chinese webpage. it still tell me the data is not corret.
would you help me? how get the correct information from mediapad m3 ?
my tablet is wifi version.
Model: BTV-W09
IMEI/SN: 28D6R17A21002913
product id : open calculator and enter ()()1357946()()=. An 8-digit ID will appear
i dont know which step i wrong..
Click to expand...
Click to collapse
DVSGUY said:
Hi,
Could someone with Chinese VPN access help me out with getting my unlock code:
Model: BTV-W09
Serial: 28D6R17A21001753
Product ID: 75710544
I got the expected "check your information" problems on non-cn site, and N.A. support says that they won't give a code due to warranty issues.
BTW if it helps anyone, I found using downloading "PixelPhone Dialer & Contacts" seemed to be the only way to get to my Product ID (Dial *#*#1357946#*#*) since there is no ( or ) keys on my pre-installed calculator app.
Thanks
Click to expand...
Click to collapse
Infinitlee said:
yap.. i use the same method to get the product id. but cn website still display the information is not corrent.. ><
Click to expand...
Click to collapse
You must have EMUI 4.1 installed. I had to downgrade it to get it to work.
I know this will sound crazy but the only way I got it to work was with EMUI 4.1.
I literally upgraded to EMUI 5.0, with the updater app in tablet.
Then flashed http://download-c1.huawei.com/download/downloadCenter?downloadId=94469&version=380487&siteCode=ru
Once it rebooted I flashed http://download-c1.huawei.com/download/downloadCenter?downloadId=94471&version=380540&siteCode=ru
That got me to EMUI 4.1 and gave me a different product code.
filledtwinkie said:
You must have EMUI 4.1 installed. I had to downgrade it to get it to work.
Click to expand...
Click to collapse
Hi !
i just make sure my tablet emui version is 4.1.3.
It must look like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ajnexus5 said:
It must look like this.
View attachment 4371288
Click to expand...
Click to collapse
4.1 and 4.1.3, that is different ??
god HAUWEI !!!
Just get unlock code from DC Unlocker. Cheap and easy.
Sent from my BTV-W09 using Tapatalk
I cannot get dcunlocker to recognise the tab.
elcidroyale said:
Just get unlock code from DC Unlocker. Cheap and easy.
Click to expand...
Click to collapse
Which version of DC Unlocker did you use? When I try to use it it keeps saying phone not found.
Where did you get the drivers for the tablet? Maybe I don't have the correct version.
My computer sees the ports but not the modem because it's wifi only.
Any help would greatly appreciated.
elcidroyale said:
Just get unlock code from DC Unlocker. Cheap and easy.
Sent from my BTV-W09 using Tapatalk
Click to expand...
Click to collapse
I tried it but first he told me that he needed 15 credits and when he tried to do the root I started doing factoryrecet and sass they lost the credits. I already wrote them but until January 2 they do not go back to work.
ajnexus5 said:
I tried it but first he told me that he needed 15 credits and when he tried to do the root I started doing factoryrecet and sass they lost the credits. I already wrote them but until January 2 they do not go back to work.
Click to expand...
Click to collapse
Good luck!
Sent from my SM-N920P using Tapatalk
elcidroyale said:
Good luck!
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Hello elcidroyale
i bought credits from dc-unlock, but i dont know how to root the device
could you describe how to root this ?
Hey guys, does anyone have a copy of this file that they can share? I flashed to the SM-N960U1 pie update last night and lost VoLTE and WiFi calling on Verizon. I'm a little rusty with Samsung's (been a few years) so I guess I made a rookie mistake.
If I'm not mistaken, I really only need the CSC file but this is the only place I've been able to find the software that references Verizon directly:
https://www.sammobile.com/firmwares/galaxy-note9/SM-N960U1/VZW/download/N960U1UEU1CSB3/260802/
I'm trying to download it now but so far it's been running over and hour and its stuck at only 31.58 MB of nearly 4GB.
If someone has this file and could share it, I'd much appreciate. Or if I'm downloading the wrong file, please point me in the right direction. I need Verizon fully working on Android 9 with the SM-N960U1 firmware. Thanks!
Sent from my SM-N960U1 using Tapatalk
Upon closer review, I think I'm already on this software. So I'm not really sure what I need to flash? I can I flash a CSC from a SM-N960U (without the 1)?
View attachment 4724933
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N960U1 using Tapatalk
This picture isn't showing up from the last post for some reason.
Sent from my SM-N960U1 using Tapatalk
try to use samfirm tool 0.3.6 to dl it. no idea if the version of the firmware you want would be available but just flashing the home_csc.md5 of any recent pie version of a U firmware shouldn't matter.
also since you want a csc that is on a different firmware( ure on U1 but ure desired csc is U) phone model, ull have to probably flash it using the patched B version of odin 3.13.x
bober10113 said:
try to use samfirm tool 0.3.6 to dl it. no idea if the version of the firmware you want would be available but just flashing the home_csc.md5 of any recent pie version of a U firmware shouldn't matter.
also since you want a csc that is on a different firmware( ure on U1 but ure desired csc is U) phone model, ull have to probably flash it using the patched B version of odin 3.13.x[/QUOTeE]
Thanks but I can't get that tool to work. The original thread says to use updato now, which doesn't have any Verizon specific files (unless they're calling it something else).
Click to expand...
Click to collapse
I was finally able to download the firmware from sammobile and it turns out that it didn't help me at all. It seemingly made no change to my software.
Since it's nearly midnight on Sunday and I have to work tomorrow (I get no signal at work - wifi only) I decided to flash a CSC from an old 8.1 Verizon odin file I had saved to my PC. Wifi calling is back and none of the Verizon bloatware!! I'm glad that worked or I'd have been switching to the backup phone.
joshw0000 said:
I was finally able to download the firmware from sammobile and it turns out that it didn't help me at all. It seemingly made no change to my software.
Since it's nearly midnight on Sunday and I have to work tomorrow (I get no signal at work - wifi only) I decided to flash a CSC from an old 8.1 Verizon odin file I had saved to my PC. Wifi calling is back and none of the Verizon bloatware!! I'm glad that worked or I'd have been switching to the backup phone.
Click to expand...
Click to collapse
Hello could you please link me a copy of your csc file? Also is there a way to get video calling on the native phone app too? Thanks
jayfrom805 said:
Hello could you please link me a copy of your csc file? Also is there a way to get video calling on the native phone app too? Thanks
Click to expand...
Click to collapse
I think I'm on the latest official Verizon firmware now. Try this one:
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960U/VZW/download/N960USQS1CSD1/266832/
I can't get native video calling working on Verizon. And for some reason Wifi calling is super buggy. Texting always works but calls go straight to VM. If I try to call out, it tells me to enable WiFi calling. I go to the settings, turn it on and I can call out. Go back to settings after the call and its turned back off again so new calls go straight to VM.
Sent from my SM-N960U using Tapatalk
joshw0000 said:
I think I'm on the latest official Verizon firmware now. Try this one:
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960U/VZW/download/N960USQS1CSD1/266832/
I can't get native video calling working on Verizon. And for some reason Wifi calling is super buggy. Texting always works but calls go straight to VM. If I try to call out, it tells me to enable WiFi calling. I go to the settings, turn it on and I can call out. Go back to settings after the call and its turned back off again so new calls go straight to VM.
Click to expand...
Click to collapse
Thanks for the quick response, Also does RCS(Google chat) work with Android messages on the build your using??
jd14771 said:
hey guys, i share your pain withslow samobile downloads. justa quick LPT, check this out.....
Click to expand...
Click to collapse
actually frija is the new tool
Hi,
I got a Samsung Galaxy S10 Exynos (SM-G973N), a Korean version. I am not in Korea and don't have Korean SIM so I can't use the phone (SIM card are not recognized).
I need some help to convert it to an international version, preferably an Android 11 version if possible. Current baseband is G973NKOU6FUF3.
Regards.
Hi, did you try to flash the firmware from your country/region? Just download the firmware with Frija if you are on Windows or samload if you are using Linux/Mac and flash with Odin. It's worth a try, cause the phone is basically the same of your country. Obviously since you are flashing a different region, you have to use CSC_OXM_XXXX and not the HOME_CSC_XXXXX. if it sounds confusing you can look at this topic here. Remember to use Smart Switch to backup all your files and apps.
Hi @Cobmaster, No I am actually worried about which firmware to download. The phone is originally from Korea. I don't want the Korean version, as it comes with apps and pre-loaded content in Korean. I would like a more global version. Can I use one from another country like the UK?
Thank you for your help. I used Frija to download the SKC and KOO firmwares.
Ps: For this model there are only Korean different Korean firmwares.
@koutei . I think you can safely download a UK or whatever you prefer, no problem at all.
Cobmaster said:
@koutei . I think you can safely download a UK or whatever you prefer, no problem at all.
Click to expand...
Click to collapse
I tried it, but Odin get stuck when I click on 'Start'.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
koutei said:
I tried it, but Odin get stuck when I click on 'Start'.View attachment 5392345
Click to expand...
Click to collapse
Did you use Odin 3.13?
Cobmaster said:
Did you use Odin 3.13?
Click to expand...
Click to collapse
No, I used Odin v3.14.1
koutei said:
No, I used Odin v3.14.1
Click to expand...
Click to collapse
It's weird. I need more info. Are you using a virtual machine? Which version of Windows? Are you using the stock cable?
Cobmaster said:
It's weird. I need more info. Are you using a virtual machine? Which version of Windows? Are you using the stock cable?
Click to expand...
Click to collapse
No VM. Windows 10. No, I am not because it jiggles and disconnects the phone.
Hi, did you managed to accomplish this? I've searched for days and tried several methods to no avail. I'm starting to think that it is not achievable. If any expert would confirm this, I guess I will abandon the idea . Thanks in advance
I'm also searching did you succeed this convert?
I have G970N (s10e korea) want convert international G970F firmware.
Is it possible? Some people says yes some people said no.
Hi,
I got a Samsung Galaxy S10 Exynos (SM-G973N), a Korean version. I am not in Korea and don't have Korean SIM so I can't use the phone (SIM card are not recognized).
I need some help to convert it to an international version, preferably an Android 11 version if possible. Current baseband is
G973NKSS7FUJ2
Could you help me
Thanks in advance
koutei said:
I tried it, but Odin get stuck when I click on 'Start'.View attachment 5392345
Click to expand...
Click to collapse
I found a reply from a user "billa" on another thread while searching for a way to flash a Global USA Note10+ from an AT&T carrier Note 10+ (Which was successfully done). Below was his/her reply. (I edited the first paragraph and included the modded Odin sourced from a YouTube video.)
You will need to use modded/patched Odin that has the model-ID and SHA hash check disabled, therefore allowing you to flash an unbranded "U1" firmware onto a branded "U" phone and vice versa.
As of now this works on most US Qualcom (QC) models, but an increasing number of international Exynos (EX) models now include a new RMM security which prevents this kind of cross-flashing unless you first disable the RMM, by flashing an RMM-Disabler package through TWRP.
Hope this helps!
koutei said:
Hi @Cobmaster, No I am actually worried about which firmware to download. The phone is originally from Korea. I don't want the Korean version, as it comes with apps and pre-loaded content in Korean. I would like a more global version. Can I use one from another country like the UK?
Thank you for your help. I used Frija to download the SKC and KOO firmwares.
Ps: For this model there are only Korean different Korean firmwares.
Click to expand...
Click to collapse
what was the solution Eventually because i have the same problem
Jantao said:
Hi,
I got a Samsung Galaxy S10 Exynos (SM-G973N), a Korean version. I am not in Korea and don't have Korean SIM so I can't use the phone (SIM card are not recognized).
I need some help to convert it to an international version, preferably an Android 11 version if possible. Current baseband is
G973NKSS7FUJ2
Could you help me
Thanks in advance
Click to expand...
Click to collapse
I have the same issue any solution?
Hi
Please what is the best solution to this problem? I have the same issue.
Hello, look here tried as explained
https://forum.xda-developers.com/t/...-only-no-need-of-paid-apps-boxes-etc.4481487/
Hi, I had the same issue, tried everything but couldn't get the network to work, gave up.
Finally found a working custom rom, now everything is working fine for 5 months.
kevinjr7 said:
Hi, I had the same issue, tried everything but couldn't get the network to work, gave up.
Finally found a working custom rom, now everything is working fine for 5 months.
Click to expand...
Click to collapse
I'll post a detailed steps on how to fix if anyone still needs it.
kevinjr7 said:
I'll post a detailed steps on how to fix if anyone still needs it.
Click to expand...
Click to collapse
please I still need it