Optimus Drunk Kernel for POCO X2/Redmi K30
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Updated to latest Linux kernel tag
- Built with latest AOSP clang
- AnyKernel3
- Wireguard support
- Spectrum Support
- Shadow Call Stack
- Wakelock blocker
- KLAPSE Support
- Westwood (default) & BBR TCP
- Sio, Fiops, Zen & Maple (default) I/O Schedulers
- Optimisations from other kernels
Download:
Github
FK Manager config
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or FK Manager and reboot, that's all
XDA:DevDB Information
Optimus Drunk Kernel for POCO X2, Kernel for the Xiaomi Poco X2
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix
Kernel Special Features:
Version Information
Status: Stable
Created 2020-03-30
Last Updated 2020-09-11
Download link and instructions please.
EDIT: Got it, thank you so much.
GtrCraft said:
Optimus Drunk Kernel for POCO X2/Redmi K30
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Built with Clang 10.0.4
- AnyKernel3
- MIUI compatible
- Wireguard support
- Wakelock blocker
- Westwood TCP
- Sio, Fiops, Zen & Maple (default) I/O Schedulers
- Optimisations from other kernels
Downloads:
Android 10:
FK Manager config
Github
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or FK Manager and reboot, that's all
XDA:DevDB Information
Optimus Drunk Kernel for POCO X2, Kernel for the Xiaomi Poco X2
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix
Kernel Special Features:
Version Information
Status: Beta
Created 2020-03-30
Last Updated 2020-03-30
Click to expand...
Click to collapse
Very good, X2 development is just taking off now.
I flashed it with MIUI.eu 11.0.13. Will give feedback later ??
Update : after a whole I realised that my screen won't turn of during calls & voice notes. It's all fixed after I flashed back the stock kernel. Not sure what's the problem but I hope you can take a look at it ?
Beta 2 is here:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b2
Changelog:
Rebased on AOSiP kernel
Fixed proximity sensor
Made kernel zip smaller
hoodlumfird said:
I flashed it with MIUI.eu 11.0.13. Will give feedback later
Update : after a whole I realised that my screen won't turn of during calls & voice notes. It's all fixed after I flashed back the stock kernel. Not sure what's the problem but I hope you can take a look at it
Click to expand...
Click to collapse
Fixed in the just released beta 2
GtrCraft said:
Fixed in the just released beta 2
Click to expand...
Click to collapse
I flashed beta 2 & I noticed autobrightness works veryy well unlike before. Proximity sensor works well also. Not to forget that beta 2 feels buttery smooth (it was a bit laggy with beta 1)
Thank you for you hard work keep it up ??
I understand yours effort sir, but just heads up that everyone here devloping kernels or roms have their own method of flashing, why this is happening? isn't every dev sync up or they have common recovery through which they can flash things normally. (Not talking abt EU rom users). for arter most of poco users need to flash kernel and then stock recovery. then it will flash and work.. In optimus kernel, it doesnt worked on stock recovery but its stuck on boot logo and again i flash fake twrp of K30 and then i flashed my stock rom and your kernel and it worked. even arter rom has different flashing technique and other devs for roms have other flashing techniques.
So may I know why everyone have different techniques here to flash? its quiet time consuming and we need to research on how to flash it and make things work.
Hard_Rock83 said:
I understand yours effort sir, but just heads up that everyone here devloping kernels or roms have their own method of flashing, why this is happening? isn't every dev sync up or they have common recovery through which they can flash things normally. (Not talking abt EU rom users). for arter most of poco users need to flash kernel and then stock recovery. then it will flash and work.. In optimus kernel, it doesnt worked on stock recovery but its stuck on boot logo and again i flash fake twrp of K30 and then i flashed my stock rom and your kernel and it worked. even arter rom has different flashing technique and other devs for roms have other flashing techniques.
So may I know why everyone have different techniques here to flash? its quiet time consuming and we need to research on how to flash it and make things work.
Click to expand...
Click to collapse
I can't change the way others want you to flash kernel or rom.
But for me you can use the Redmi K30 twrp from xiaomi.eu of Franco Kernel Manager as stated in OP, it doesn't matter.
And it doesn't matter which recovery you have.
Update time:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b3
Changelog:
-Updated Wireguard to 1.0.20200401
-Added KLAPSE & Force Fastcharge (Disabled by default)
Can you add exfat support? Thanks
时光477 said:
Click to expand...
Click to collapse
That will happen, but when I don't know as I am waiting for a better source to use
Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b4
Changelog:
-Updated Wireguard to 1.0.20200413
-Removed Force Fast Charge
-Add ExFAT & BBR TCP
-Built with Clang 10.0.6
First stable release:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.0
Changelog:
-Rebased on Arter kernel bringup
-Updated to 4.14.176
-All features are still here
Its works on miui latest 11.07 (rooted)?
fromjeet said:
Its works on miui latest 11.07 (rooted)?
Click to expand...
Click to collapse
Read the OP
not able to download from fkm
Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.1
Changelog:
* Updated to 4.14.177
* Added some powersaving features
GtrCraft said:
Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.1
Changelog:
* Updated to 4.14.177
* Added some powersaving features
Click to expand...
Click to collapse
In custom roms when touch power button to lock it selects first item like dialer can u check it
vny10 said:
In custom roms when touch power button to lock it selects first item like dialer can u check it
Click to expand...
Click to collapse
It's a known issue related to the vendor, not the kernel.
Related
RADIOACTIVE KERNEL
For CM13(deprecated) and CM14.1 Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,since this device is very similar to the oneplus one device which i own decided to build a kernel for the zuk z1 because it barely have development and some friends ask me to do something and here i come, my primary goal is to provide a stable, fast and battery friendly kernel with some cool features
Current Features
General List:
Compiled with Uber-naro4.9 Toolchain
Anykernel Ramdisk compatible with all roms
Ukm into kernel zip
Fingerprint gestures
Cpu frequencies from 268000 to 2572000
Cpuquiet hotplug driver (replacement for mpdecision)
MSM limiter
Zzmoove native hotplug can be activated setting it in governor tunables
Option to enable/disable Fsync
Deadline, Row, Maple, Cfq, Bfq, Noop, Sio, Sioplus, Zen, Tripndroid
A bunch of cool governors.
Kcal Control: Colors, Saturation, Hue, Contrast and more
Gamma profiles into ukm
Gentle Fair Sleepers (Disabled by default)
Auto FS Laptop Mode
Arch Power
XZ Kernel Compression
Suspend estate freeze
Faux sound control
Optimized rwsem algorithm
Power efficient workqueues
Uv table interface (thanks @JoaoPaulo)
Disabled lot of debugging to gain performance
And much more to come....
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip
* Reboot
* Install your prefered kernel tweaker app(synapse recomended)
* Enjoy!!!
CHANGELOG MARSHMALLOW
HERE
CHANGELOG NOUGAT
HERE
DOWNLOADS MARSHMALLOW
HERE
DOWNLOADS NOUGAT
HERE
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* LordBoeffla
* ZaneZam
* Ak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* JoaoPaulo
* MrColdbird
* Entropy512
* Faux
* Harunjo
* nikhill
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
HALL OF FAME!!!!!
Huge thanks to all donors
@JulioMC--------10
@woonaval------15
@borx28----------20
@risoterapia-----15
@strongst-----10
@kepaware---10
@giorgiosimeoni----20
@sanangel------10
If someone else donated and isn't in the donors list please let me know and i'll add asap
XDA:DevDB Information
Radioactive Reborn kernel, Kernel for the Lenovo Zuk Z1
Contributors
acuicultor, JoaoPaulo
Source Code: https://github.com/acuicultor/Radioactive-kernel-HAM
Kernel Special Features: Stable, fast, battery friendly
Version Information
Status: Stable
Current Stable Version: REBORN_V3.14
Stable Release Date: 2016-11-16
Created 2016-04-11
Last Updated 2016-12-15
Reserved
Reserved
Radioactive kernel for our ZUK? Wow! More thanks, master!
Enviado desde mi Nexus 6P mediante Tapatalk
Thanks for all your work!!!!
@Heisenberg, hi opened the thread in general section by mistake, can you move to original section please? Thanks in advance.
Enviado desde mi A0001 mediante Tapatalk
Flashed!! Thanks for your kernel
Great work! Flashed and working perfect! :good:
Please update link file not found..
ATM01 said:
Please update link file not found..
Click to expand...
Click to collapse
I downloaded without any problems :bueno:
ATM01 said:
Please update link file not found..
Click to expand...
Click to collapse
Try again please.
Enviado desde mi A0001 mediante Tapatalk
This kernel works really fine, I'm using it with Coldbird's CM13 ROM.
Thanks thanks thanks!!!!!
acuicultor said:
@Heisenberg, hi opened the thread in general section by mistake, can you move to original section please? Thanks in advance.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Done :good:
woonaval said:
This kernel works really fine, I'm using it with Coldbird's CM13 ROM.
Click to expand...
Click to collapse
I havn't tried that. Are there any notable differences between OP's Kernel and MrColdBird's Kernel?
Raynors233 said:
I havn't tried that. Are there any notable differences between OP's Kernel and MrColdBird's Kernel?
Click to expand...
Click to collapse
I haven't been able to test it thoroughly, but a thing that is noticeable is that battery consumption while screen-off is better than with Coldbird's.
Please notice that by installing this kernel you will lose Coldbird's fancy feature of fingerprint unlocking with the screen off, also gestures in home button. I think they want to implement it in the future, though.
EDIT: from version 1.01, Coldbird's fancy feature is also present in this kernel and also SuperSU works fine again
Thank you for your work!
Tell me why does not work root, no built-in or installed SuperSu through TWRP.
Resurrection Remix
woonaval said:
I haven't been able to test it thoroughly, but a thing that is noticeable is that battery consumption while screen-off is better than with Coldbird's.
Please notice that by installing this kernel you will lose Coldbird's fancy feature of fingerprint unlocking with the screen off, also gestures in home button. I think they want to implement it in the future, though.
Click to expand...
Click to collapse
Nice answer, thx! I'll try it after the fingerprint unlocking feature had been implemented.
Yes battery consumption is good but missing FP feature..
what application you recommend for kernel settings ?
Sent from my Z1 using XDA-Developers mobile app
The Best firmware for our zuk!!! @acuicultor, fingerprint works without PRESS for unlock?
Enviado desde mi Z1 mediante Tapatalk
Quantum Kernel
Android under power of Quantum
Disclaimer
Code:
#include
/*
* Your warranty will not void, no warranty is void in YU.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Description on Quantum Kernel
--- Quantum Kernel is optimized for battery and performance. It contains less feature, for good performance and battery backup only. It is maintained by Hriday Sharma.
If you want Quantum Kernel for other device you can contact the owner of Quantum Kernel. ---
What make this Kernel so unique? -- Have a look below --
- Based on CAF Sources
- Tweaked to show proper naming in About Phone
- Tuned up for ARM64
- CPU Online/Offline management is improved
- In governor you get Darkness Governor
- For fast charging Thundercharge is their.
Installations Steps:-
-- Minimum Requirements To Install Quantum Kernel
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP
WARNING or TIP :-
If you are trying to take backup of boot.img (kernel) from TWRP and restore it before or after flashing then you will soft brick your phone. DON'T try to do this at anytime. Not only for this kernel, i'm talking about all kernel.
1. Boot into TWRP
2. Flash Quantum Kernel ZIP
3. Wipe cache and dalvik
4. Reboot to System
Source Code: Click Here
Do like our Facebook Page: Click Here
Credits:-
- CyanogenMOD
- Codeaurora
- Hriday Sharma
- & All other commiters on Quantum Kernel Source Code
Thank You
Hriday Sharma
XDA:DevDB Information
Quantum Kernel, Kernel for the YU Yureka
Contributors
HridayHS
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: V2.0
Created 2016-09-15
Last Updated 2017-01-02
Downloads:-
- Quantum Kernel V1 - Click Here
- Quantum Kernel V2 - Click Here
Changelog:-
V1: Initial Release
V2:-
* Android Nougat Support
* LA.BR.1.2.9_rb1.5 branch merged from CAF so expect lots of improvement
* CyanogenMod upstream changes merged ( so Gestures are their)
* MSM Thermal updates
* F2fs update
* Task Scheduler tuned for power saving
* Core control update
* Kernel Version Updated to 3.10.103
* Sdcardfs
* Security update
* Mmc-max-speed(eMMC Block layer simulation speed controls)
* Faux Sound Control V3.5
* Sio Scheduler
* Kcal
* Kexec Hardboot Supported
May i know what is kexec hardboot?
Thread closed due to not being GPL compliant.
OP can PM me when he has kernel source updated.
EDIT: and open again.
Code:
#include
/*
* Your warranty is now void. Nah! Just kidding No warranty is void in YU. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Anonymous Kernel -->Aim of this kernel is to get better battery backup.....Help me to make this kernel Best,Better,Beast
Previously this Kernel I used For Personal Use
Features I Included In This Kernel
Spoiler: Features:->
*Thunderharge cabability
*Tcp controls
*added darkness(optimised)
*arch power optimizations
*dts sound support
*optimizations for A53/ARMv8 architecture
*added powersuspend
*optimised the interactive governer
*thermal optimizations
*optimizations to gpu
*added f2fs
*upgrade linux to 3.10.104
*add zram optimizations
*Ka mod compatible
*State notifier
*alucard hotplug
*Kali full support including injection
*fsync support
*kcal
More and more featured to be yet to added which u see in future builts.
Builts are weekly or Sometimes after 2-3 Days
Procedure :-
* Boot into recovery (twrp recommended)
* Wipe cache and dalvik cache
* Flash AnonymousVxx.zip
* Reboot to system
* Done ...Profit
*use KaMod to Edit Freq
Download links are in second post
For Feature Requests Open this :- http://forums.yuplaygod.com/threads/anonymous-kernel-v3-02-02-mm-n-nethunter-hotspot-fixed-f2fs-yu-yu-volte-fixed-daily-use.47130/page-8#post-770498
Credits:-
@Sushant More
@Rakesh Batra
@Prasoon Mehra
@Shoaib05
XDA:DevDB Information
Anonymous Kernel, Kernel for the YU Yureka
Contributors
skull(nj)
Source Code: https://github.com/AnonymousKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 4.2
Stable Release Date: 2017-03-13
Created 2017-03-15
Last Updated 2017-03-14
Changelogs And Download Links:-
Version1----->
Changelogs:-
*Initial release
*Thunderharge cabability
*Tcp controls
*added darkness(optimised)
*arch power optimizations
*dts sound support
*optimizations for A53/ARMv8 architecture
*added powersuspend
*optimised the interactive governer
*thermal optimizations
*optimizations to gpu
*hotspot fixed
Download link(v1):->https://drive.google.com/file/d/0Bx81asNJnm2Ba005ckRNVjhBSDA/view?usp=drivesdk
Version1.1(bug fix)->
Changelogs
*added f2fs
*upgrade linux to 3.10.104
*add zram optimizations
*reboot issue fixed[/SPOILER]
Download link(v1.1):->https://drive.google.com/file/d/0Bx81asNJnm2BSGRZdHpzYzFGc2s/view?usp=drivesdk
Version2:->>>>
Changelogs:->
*Ka mod compatible
*State notifier
*alucard hotplug
*Kali full support including injection
*And many more optimization
Download link(v2)latest:->
https://drive.google.com/file/d/0Bx81asNJnm2BLXprOE5hVGdHamc/view?usp=drivesdk
Version3:---->
Changelogs+Download links:->
http://forums.yuplaygod.com/threads...olte-fixed-daily-use.47130/page-6#post-766805
Version4.1---->
Changelogs And Download
http://forums.yuplaygod.com/threads...lte-fixed-daily-use.47130/page-16#post-796225
Latest update (4.2)
http://forums.yuplaygod.com/threads...lte-fixed-daily-use.47130/page-21#post-798608
Join our telegram group:- https://t.me/joinchat/AAAAAEFJundmJTpMEFvp-g
What's the difference between Anonymous 4.2 tomato and Anonymous 4.2 wba tomato ?
Sent from my Lenovo A6000 using Tapatalk
Prince153 said:
What's the difference between Anonymous 4.2 tomato and Anonymous 4.2 wba tomato ?
Click to expand...
Click to collapse
Wba don't have bootanimation
Hi i use anonymous v2 on santoni and i don't now if u are the maintainer can u add full Kali to it like yu 4g
Code:
*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
NeonKernel is a custom kernel for the Mi 6X (wayne), also there will be version for Mi A2 (jasmine) if requested.
Features:
Code:
- Linux 4.4.179
- Built with latest AOSP Clang.
- Kernel based on clean import.
- EAS With our own energy model
- Tweaked CFQ IOSCHED
- Anxiety IOSCHED
- DT2W
- Westwood TCP Cong enabled
- Changed haptic feedback
- Audit disabled
- KCAL
- Initial GPU freq is 160MHz
- F2FS Supported
- Inbuilt custom thermals config (by rcstar6696)
This is first beta build, tested on pie MIUI and few custom ROMs. If you've stuck on Mi logo after flashing kernel, hold power button until phone reboots twice.
How to install
Code:
1. Flash zip via TWRP (or any other recovery)
2. Wipe Cache & Dalvik (optional)
3. Done. Reboot into system.
Download: Telegram channel (mostly updated), GitHub
If you've got any questions or problems, join our telegram group.
Contributors:
hypeartist, me, rebenok90x
Source code: [url]https://github.com/NeonKernel/NeonKernel[/URL]
Also thanks to everyone who have helped me/I've picked commits from.
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2019-04-30
Last Updated 2019-04-30
reserved.
can you make seperate package without thermal config for next build? thanks
help
Hi, I recently installed this kernel on my mi 6X with Xiaomi .eu latest stable rom 10.3.2 and de double tap to wake feature isn't working porpertly. I hope you can help me, thanks.
Greetings from Colombia
Daniel Olivares said:
Hi, I recently installed this kernel on my mi 6X with Xiaomi .eu latest stable rom 10.3.2 and de double tap to wake feature isn't working porpertly. I hope you can help me, thanks.
Greetings from Colombia
Click to expand...
Click to collapse
Try disabling selinux from enforcing to permissive.
in terminal type these below
su
Press enter then type
setenforce 0
Press enter
(to check the status though you can write getenforce and it'll tell you if permissive or enforcing)
After that in Settings if you have a enable / disable DT2W switch turn it off then on again, turn off screen and test.. but recently for me even that doesn't work anymore as it seems whoever makes builds of Mokee rom for my device removed DT2W from the rom instead of fixing it not working when enforcing
Don't think the kernel is the problem, rather it's the rom
ZaldhyDarwin said:
can you make seperate package without thermal config for next build? thanks
Click to expand...
Click to collapse
Next build will be without thermals at all. Comes soon, I hope
where can I download this kernel?
inVain_theGenuine said:
where can I download this kernel?
Click to expand...
Click to collapse
Did you read the OP post ?
Neverhopless said:
Did you read the OP post ?
Click to expand...
Click to collapse
I did!
heck, I even re-read it!!!
did you try to click the github link ?
inVain_theGenuine said:
I did!
heck, I even re-read it!!!
did you try to click the github link ?
Click to expand...
Click to collapse
Did you try to click the Telegram link ?
Neverhopless said:
Did you try to click the Telegram link ?
Click to expand...
Click to collapse
I don't have any telegram account.
does that mean the github link is broken ?
inVain_theGenuine said:
I don't have any telegram account.
does that mean the github link is broken ?
Click to expand...
Click to collapse
Yes
Introducing ...
RedLine Kernel - for Samsung Galaxy J4
(Lol, bad image )
Code:
#include <std_disclaimer.h>
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. */
1. What is RedLine Kernel?
RedLine kernel is custom optimized and improved kernel, aiming for less-developed device (Like this Samsung Galaxy J4).
2. Features
This kernel have :
CPU Overclocked to 1.6 Ghz
Kali NetHunter support
HID support for Kali NetHunter
SELinux mode can be changed to Enforce or Permissive (default)
WireGuard Support
Boeffla Wakelock Blocker
Powersuspend Driver
Enable built-in available CPU Governors
Switchable fsync & Dynamic Fsync
GPU Voltage Control
Increased refresh rate to 65Hz
Graphic & Rendering Optimization
Sec Battery Control
Increased charging input
Disabled anoyying security
ZRAM lz4 support (default)
And many more! More features coming soon
Notes: This kernel only support GSI ROM, if you install it in stock, maybe there are bug! To see what is GSI and how to install it, see the @phhusson 's GitHub GSI
3. Requirement
Samsung Galaxy J4, with bootloader unlocked
Official TWRP 3.4 (CLICK HERE)
Any GSI ROM A64 A/B installed (Search for the tutorial)
Magisk (Optional, if you want root)
4. Installation Steps
Boot Into Recovery
Flash as usual
If you ever flash Magisk before, it got deleted. Reflash magisk or keep unrooted, that's up to you
Reboot
If you face the 'there is a problem with your device' (AOSP GSI), simply ignore it
5. Bugs
You tell me If you want to report, please send me last_kmsg from /proc and logcat when doing the bug. Syslog is helpful too.
6. FAQ
A: Does my data will going to deleted when installing this kernel?
B: NO! The installer script is just replacing boot and dtbo partition, NOT DATA PARTITION. So data will safe.
A: Keep getting bootloop or infinity boot (enter the screen and then goes back to boot animation)!
B: Do you flash in GSI? What GSI you use? And you sure you flash this after Android 10 update, so the Q vendor is installed, not P?
A: You f*cking fake!! This is broken kernel!!
B: Dude, I tested this kernel my self! And it works properly. You want proof? Go to Post 3!!
A: Great! How I can help you? By donating?
B: See number 7 below
6. Screenshots
See Post 3
7. Donate
If you feel this kernel is helpful, and want to help me build by donating, here is the answer : Don't donate to me, donate to other people that more need donation. I'm not being rude, or don't want to be helped, or whatever. This kernel is builded in my free time, so I don't do this for job, but just my hobby
8. Source
Kernel : https://github.com/RedLine-Project/RedLine_j4ltejx
Defconfig: redline_defconfig
GCC: Google GCC 4.9, branch ndk-release-r17
My source is freely used for anyone. You can fork it, clone it, even build it without my permission. But, if you want to rebuild kernel, add other features, and share to somewhere, please add my credit! Atleast my XDA username, 'source forked from RedLine', or anything! It will be very appreciated
JOIN OUR GROUP IN TELEGRAM :
• Samsung Galaxy J4 Group : t.me/SamsungGalaxyJ4
• RedLine Project Channel : t.me/redlinep_channel
9. Thanks to
Allah SWT
My beloved parents and family
@asarre , for helping me to overclock
@AlexGeek3 , his commit is very useful for my kernel
All of Samsung Galaxy J4 telegram group's member
My tester
@osm0sis for AIK, @jcadduono for Dtbtool
And other!
Thanks for using this kernel! Cheers
EDIT 19/03/2021: Discontinued! The link is dead.
RedLine V2.0
This is just for avoiding forgot zip name. This release is only add 2 features.
Download Link: https://github.com/redline-dev/RedLine_j4ltejx/releases/tag/V2
All downloads: https://github.com/redline-dev/RedLine_j4ltejx/releases
Changelog:
Migrate to shell script installer. This allowing me to edit & tweak the kernel when installing, and better UI message
Added RTL8188EU & RTL8812AU for Kali NetHunter. Modules available in /sdcard/RedLine-stuff
================================
V1 NOT AVAILABLE, DUE TO WEBSITE DELETION. V2 IS AVAILABLE IN GITHUB
RedLine V1.0
Download Link : http://hendramanu.rf.gd/j4ltejx/RedLine-09_11_2020_16_51-j4ltejx.zip
All downloads : http://hendramanu.rf.gd/j4ltejx
Changelog:
- Initial build with :
CPU Overclocked to 1.7 Ghz
GPU Overclocked to 1.1Ghz (still bugged!)
Kali NetHunter support
HID support for Kali NetHunter
SELinux mode can be changed to Enforce (default) or Permissive
WireGuard Support
Boeffla Wakelock Blocker
Powersuspend Driver
Enable built-in available CPU Governors
Switchable fsync & Dynamic Fsync
GPU Voltage Control
Increased refresh rate to 65Hz
Graphic & Rendering Optimization
Sec Battery Control
Increased charging input
Disabled security
ZRAM lz4 support (default)
Screenshot taken from Bless GSI :
Reserved (Other things)
Excellent work, mate
asarre said:
Excellent work, mate
Click to expand...
Click to collapse
Thanks
Awesome
Great work bro. I am still waiting for an overclocked kernel for a51 tbh but anyways great work. Also you asked me about the dtbo support in ofox , was that to make this work with ofox?
Mirai_deku said:
Great work bro. I am still waiting for an overclocked kernel for a51 tbh but anyways great work. Also you asked me about the dtbo support in ofox , was that to make this work with ofox?
Click to expand...
Click to collapse
I'm not sure. At first I just flashing dtb to dtbo partition, with maybe expecting any different, but I think it is little bit useful.
But still can't install in twrp 3.2, since it Android O based (no system_root), so myb will edit the script.
And for A51, I already send query for samsung to release OneUI 2.5 / U4 source, but still no respond. If I develop now, it may useless because there is a chance will cause conflict when importing U4 source in future. And Exynos 9610 is something quite new to me, so need to learn kmsg, log, and dts.
Btw thanks
the link doesn't open bro
leoleeo said:
the link doesn't open bro
Click to expand...
Click to collapse
Fixed. My website is under deletion, and I upload release in GitHub. Check the new link.
will it work on the J5 Prime? since it has the same chipset (exynos 7570) and I would like to try it.
Agus0215 said:
will it work on the J5 Prime? since it has the same chipset (exynos 7570) and I would like to try it.
Click to expand...
Click to collapse
I think no, since it has different dts
the link is broken dude
batangllanos said:
the link is broken dude
Click to expand...
Click to collapse
Hi!
Yes, because it's discontinued. Even the source link is dead too. I'll change the status to discontinued in thread.
But I make new kernel: https://t.me/SamsungGalaxyJ4/13629. However it's still in testing phase, but will released if I have time.
Thanks!
hendramanu said:
Hi!
Yes, because it's discontinued. Even the source link is dead too. I'll change the status to discontinued in thread.
But I make new kernel: https://t.me/SamsungGalaxyJ4/13629. However it's still in testing phase, but will released if I have time.
Thanks!
Click to expand...
Click to collapse
thank, but why is this discontinued?
batangllanos said:
thank, but why is this discontinued?
Click to expand...
Click to collapse
Busy and got messed up
hendramanu said:
Busy and got messed up
Click to expand...
Click to collapse
Oh, okay