I forgot password of my realme c3 device. what should I do now?

I forgot password of my realme c3 device. what should I do now? - Realme C3 Questions & Answers

I tried to perform a factory reset from recovery mode. It is asking for the password there too.
When I tap 'forgot password' option it says 'a forgotten password can't be retrieved. Please contact our after-purchase service center for help'.
Is there any other way I can try before visiting there service center?

hi,
I am facing the same issue on realme c3 phone, is there any solution.

WTF!!
They are asking password even in recovery?? Well, good that one can't simply wipe your phone. Your good
Also, try to use memorable pass like birthdate or time dependent password app for better use.

Just unlock bootloader using ADB it will erase all data from your phone

Just flash stock firm, everything will be back to normal!

1) Download stock rom.
2)Extract it if it is in .ofp format using mct tool.
3) Download SP flash tool.
4) install drivers.
5) Download cdc driver install them.
6) Download brom exploit to bypass sequreboot. Or you wont be able use sp flash tool. You can find a ton of tutorial on YouTube for that.
7) load scatter file in sp flash tool.
8) open brom exploit.
9) download and install lib-usb.
8) power of you phone. Connect it to pc while holding vol + and - key.
9) You will see something on sequre boot bypass tool but its not over yet.
10) open lib usb filet while the phone is still connected. Click next and you will find option install filter. Now select mediatek usb port. And install filter on that.
11) disconnect the phone from pc. Power and power off again.
12) open bypass tool. hold vol + - key connect the phone.
13) go to sp flash tool. Just select userdata.
14) click download.
15) let it finish. And done.
Orrrr.
You can go to youtube search for Chanel named drwangz. You find a tutorial for hardbrick real me c3 phone. Follow that tutorial.
make sure you select download mode in sp flash tool

Related

Guide Root and Unbrick Moto E3 Power (XT1706), For newbie

Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.

First of all I would like to say that @bopvnn luck is not on your side :silly: second of all , all the work was done by @dr.faramroze I just made the tutorial a bit easier .

pranaay saini said:
First of all I would like to say that @bopvnn luck is not on your side :silly: second of all , all the work was done by @dr.faramroze I just made the tutorial a bit easier .
Click to expand...
Click to collapse
i dont know what u mean "lucky is not on my side" :-?

bopvnn said:
i dont know what u mean "lucky is not on my side" :-?
Click to expand...
Click to collapse
Meaning you have bad luck .

Hey, I see some guys on Youtube that said losing their IMEI after flashing stock rom using SP Flash Tool. How to restore it? The last time I use a Mediatek Device it was an Android One.

Removing battery wont help ,
bopvnn said:
Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.
Click to expand...
Click to collapse
everything you said is right except for you have to keep the battery inside and the phone switched
this will help
https://www.youtube.com/watch?v=W-bBhe3kp_8&t=327s

Will root will run on xt1700?
As in the title - Will the TWRP work with the XT1700?

Alcatraz_91 said:
everything you said is right except for you have to keep the battery inside and the phone switched
this will help
&t=327s
Click to expand...
Click to collapse
Bro my phone is vibrating and showing Moto logo and again vibrating and showing Moto logo...so I'm thinking that my phone is soft bricked after flashing twrp 3.1.1
When I try to flash stock using sp flash tool some error is showing 0*00... Will u plzzz help to get back my device..:crying::crying:

My internal storage is about nill...
But it is showing about 14 GB and the actual storage is now 774 mb....how to format it...I'm unable to format it with twrp plzzz help...it is showing storage is running out....plzzzzzz help me....

Manoj Kumar 9779 said:
My internal storage is about nill...
But it is showing about 14 GB and the actual storage is now 774 mb....how to format it...I'm unable to format it with twrp plzzz help...it is showing storage is running out....plzzzzzz help me....
Click to expand...
Click to collapse
Please do not private message me asking for help/assistance with your problems.
I will help anyone if asked correctly, in the correct way and in the correct place.
I will not answer to demanding messages or messages giving no information what so ever.
I'm a typical user, not a helpdesk.
You question is answered in this thread and the Q and A section.

Not able to roote3 power with build s144
Hi,
I have moto e3 power with build number xt1706_s144_170915_row. When i am rooting and installing twrp through fastboot method, after rooting the phone goes in bootloop. The same issue was happening with build s143, however i was able to successfully root for previous build s141. I am following the same method but failing now. Any help will be great

It's my first phone that I will root (moto e3 power)
But the main problem is that, I can't unlock the bootloader , i have used adb driver but after the "fastboot devices" command , my phone's starts in fastboot mode but the connection with my PC is lost. , so please give me the link of the minimal adb and the other moto e3 power driver that you have used to unlock

Jackyhost said:
It's my first phone that I will root (moto e3 power)
But the main problem is that, I can't unlock the bootloader , i have used adb driver but after the "fastboot devices" command , my phone's starts in fastboot mode but the connection with my PC is lost. , so please give me the link of the minimal adb and the other moto e3 power driver that you have used to unlock
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
jigar191089 said:
Hi,
I have moto e3 power with build number xt1706_s144_170915_row. When i am rooting and installing twrp through fastboot method, after rooting the phone goes in bootloop. The same issue was happening with build s143, however i was able to successfully root for previous build s141. I am following the same method but failing now. Any help will be great
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:

Note :-
It works only on S135 and S141
It does not work with S143 and S144
I don't know why

hey 'fastboot format userdata' command not working.. it says "Createprocess failed: system cannot find file specified. (2) cannot generate image for userdate" Kindly help I am noobie

kunal0303 said:
hey 'fastboot format userdata' command not working.. it says "Createprocess failed: system cannot find file specified. (2) cannot generate image for userdate" Kindly help I am noobie
Click to expand...
Click to collapse
use this adb... i too had the same issue......... it worked for me.....
https://forum.xda-developers.com/showthread.php?t=2588979

HELP!!!
i cant execute "fastboot reset userdata" it shows "cant find file specified" please help someone

bopvnn said:
Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.
Click to expand...
Click to collapse
Awesome post brother! I only wish I had simply read this post before messing up so much with my phone. Actually, I was messing with some magisk module (edxposed) whick bricked my device and got me stuck at a bootloop and with no recovery partition at all. (It erased my TWRP). So I used the sp flash tool and formatted the whole flash (at that time, I hadn't read this post of yours). Then I flashed my entire firmware back via the sp flash tool. So I thought that now my problem was fixed. But when I switched on my phone I saw my phone's IMEI Number gone! And the sim not working and showing invalid IMEI message. So I tried to find a fix on the internet and I found 2 solutions. First was using an app which requires the phone to support some mtk engineering mode. I followed the instructions and realised that maybe our phone Moto E3 Power doesn't support this mode. So I switched to the second solution, which required root access. So then I set off for rooting my newly unbricked phone. But I again did some mistakes:
1.) Allowed usb debugging and OEM unlocking in my phone's developer options in settings.
2.) I installed minimal ADB v1.4.3 on a windows 10 computer. Checked my phone's connection with the PC via ADB command adb devices. It worked showing some error initially (daemon not started.... Starting daemon...) and then showing some hex code signifying my device's successful connection with the PC.
3.) Used ADB command adb reboot bootloader to boot into fastboot mode. It worked too.
3.) Used fastboot command fastboot devices to check if my device is still being recognised as connected to the pc. Here came an error (the command didn't return any hex code like the adb command adb devices did. So I googled a solution which involves updating the "Android ADB interface" to "Android Bootloader interface" in the "Android device" submenu of the "Device Manager" window of the "control panel" of the pc, by updating its drivers using the "latest windows usb drivers" 8mb file which could be found very easily on the internet (searching solution for fastboot device drivers update on Google). {*Note: If you hadn't installed beforehand, any adb and fastboot drivers at all, then you will see "Other devices" submenu instead of the "Android device" submenu in the device manager window.
Also, you compulsively need to be in fastboot mode with your device attached to pc, in order to see this "other devices" submenu.} So now the fastboot devices command started working by showing the hex code like adb devices command did.
4.) Used fastboot oem unlock command to unlock the phone's bootloader. Pressed the volume up button of my phone as instructed by the warning message on my phone's screen. Unlock flow started in the minimal adb window in my pc. Finished successfully within 9-13 seconds. Another mistake now, after unlocking the bootloader, I forgot to format userdata.. Actually I didn't know about the fastboot format userdata command. I thought the fastboot -w reboot is the only way to format userdata (which wasn't working for me). Unaware of the fact that now I was going to experience a bootloop during rebooting my phone, I continued with the further steps.
5.) Used fastboot flash recovery recovery.img command to flash the unofficial twrp img which I had already placed in the minimal adb folder and renamed to recovery.img I used unofficial twrp v3.1.1 (by moderator) [which was working perfectly earlier on my phone] {link at bottom}. Successfully finished this step too. [You can use either of the two twrp: Dr. Faramroze (link provided by op) or moderator (link provided by me). Both are working fine]
6.) Used the fastboot reboot command (although it never works for me). It shows finished in the minimal adb cmd screen but the phone doesn't reboot. So I manually unplugged the device. Removed and reinserted the battery.
7.) Now rebooted to recovery screen and found the unofficial twrp successfully installed. [ Warning: After the 6th step, don't reboot your phone normally. Instead, boot into the fastboot window [hold power + vol. up] and select the boot into recovery option. This is required only for the first boot up process or else if you do a normal boot during the first boot, the stock recovery replaces our recently flashed custom recovery..
8.) Upon entering the twrp recovery during the first boot, I installed the magisk v19.3 zip I had in my external SD card. It's not necessary to root your phone right now, you may even do it later by simply rebooting from within the twrp, and later on entering recovery after your phone is all set and working and when you're free from other hassles. But I went for rooting during the first boot. And encountered an error something like: "Cannot mount data(0mb)" at the second last line. So, I could not root my phone. So I decided to root it later on and currently just have it switched on. So, I went for the reboot option in twrp.
9.) My phone started rebooting and got stuck at the boot screen with the tag Device unlocked at the lower left corner (indicating unlocked bootloader). But this was something familiar to me, I had already dealt with this error the previous time I rooted my phone. The solution was very simple. I just had to flash a no verity-otp-encrypt.zip file {included along with the twrp link} using the twrp recovery and then my device would boot properly, as it did the last time.
10.) I flashed the no verity-otp-encrypt.zip file from the twrp and got so many red line errors during the flash. (This didn't happen the last time). Every error had the same words, "cannot mount data (0mb)". So I went back to try rebooting again.
11.) Started rebooting again. This time the device didn't get stuck at boot screen, rather it went into a bootloop, rebooting again and again. Now maybe the no verity-otp-encrypt.zip file did its job and my device got free from the stuck at boot screen problem but simultaneously got caught by the bootloop error probably created due to not formatting the userdata after unlocking the bootloader. Or maybe the "cannot mount data (0mb) just ruined up my phone. Whatever the cause be, I just went for reflashing the entire firmware via the sp flash tool and temporarily forgetting all the bootloader unlocking, custom recovery, rooting, etc and live with an invalid IMEI phone without a working sim, until I find a solution on the internet.
12.) And then, I ended up here on this thread leaving my experience, and learning my mistakes from the OP's post. Very soon I will depart for the cyber cafe to try again without any mistakes this time.
At last thanks for this awesome thread.
And yes here's the link for the unofficial twrp 3.1.1 (by moderator) & the no verity-otp-encrypt.zip file:
https://drive.google.com/folderview?id=1-CHJtDUyPH1CJHebhKsUJz8SzKJAcDbv
---------- Post added at 12:56 PM ---------- Previous post was at 12:41 PM ----------
smug_loner said:
From where i can download fastboot file??
Click to expand...
Click to collapse
Search Google for "Moto E3 power firmware flash file" and you will come across websites providing the flash file. The file would have a name like "Motorola_Moto_E3_Power_XT1706_MT6735M_S135_161108_6.0.1.zip". The "S135" over here is the firmware version and will vary upon the version uploaded by the site. The latest version as of today is S152_190315. I somehow managed to download a S151 file and I forgot where I downloaded it from. But you can still go for older firmware versions, and then when you're done with all the flashing and rooting and all that and your phone starts up without any error, you can go for OTA updates from within the settings>about phone>system update.

bopvnn said:
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
Click to expand...
Click to collapse
S151 is newest (flash file available for download) for XT1706. [Actually S152 is latest but it's not yet available for download] So you succeeded maybe because you used the older version. Cause a guy commented that he couldn't root the newer versions but could root the older versions.
---------- Post added at 02:32 PM ---------- Previous post was at 02:25 PM ----------
bopvnn said:
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
Click to expand...
Click to collapse
Is it necessary to uncheck preload? If yes, I think you should highlight it. Anyway, I didn't uncheck preload and the flash successfully worked for me? So what difference does it count for? Please do notify us of its significance.
---------- Post added at 03:03 PM ---------- Previous post was at 02:32 PM ----------
bopvnn said:
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
Click to expand...
Click to collapse
I didn't remove my battery, sim or microsd card and everything worked fine for me. Also, I didn't connect my device to pc after pressing the download button in the sp flash tool. Here's what I did instead:
I kept the sp flash tool ready with all steps. Only pressing the download button remaining. Then I connected my device to the pc. As soon as you hear the device connected sound, press the download button. And the flashing process will start. If you get late in pressing the download button, you will hear another sound of device disconnected. Then you'll have to remove the usb from the device and replug it and go for trying again pressing the download button as soon as you hear the device connected sound.

[GUIDE] How to return to Stock/Flash Images with QFIL

Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download either of the firmware from here
Download the support files (Firehose/rawprogram0.xml/patch0.xml) here
Extract the firmware and support files to the same folder so you can easily access them like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash individual partitions you can edit your rawprogram0.xml to only include the ones you want. (patch0.xml stays the same) I have linked below 2 examples, one of them flashes just a boot.img and one that just flashes the recovery.img. But you aren't limited to those.
Recovery
Boot

Mine just in case

Awesome, thanks for this post! it will really help us in upcoming projects!

Managed to revive my phone using the B12 files but it crashes after completing system.img, I think the problem is userdata.img, my phone boots but I lost the imei and I don't know how to get it back, I'm still trying.

ZTE 971 not recognized by either QPST or QFIL
Thanks for all the detailed instructions. But my ZTE 971 is not visible to either qpst or qfil eventhough the phone shows in windows 8.1. In the Developer Options menu, I noticed Select USB Configuration, RNDIS (USB ethernet) option cannot be enabled. I wonder if this has anything to do with it. OEM unlocking, USB debbugging are already selected. Any suggestions, please? Thanks.
ps. I live in Turkey. I got this phone last year from AT&T and have unlocked the sim.

My PC is not detecting my ZTE MAVEN 3
I have installed all drives but still facing the issue. I am using it on Windows 10.

I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.

Mega says that link for the driver is invalid, but the driver is included in your QPST download anyway.

000Nick said:
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Click to expand...
Click to collapse
solucionaste hermano
Mod edit:
you solved brother
Click to expand...
Click to collapse

it says qhsusb_bulk when I connect the the software is not working in the mobile and it is stuck at bootloader screen but I used the press both buttons to go to edl mode method and it said in the device manager a device connected with name : qhsusb_bulk
help pls

Hello All.
I am not able to get the following files
rawprogram.xml and patch.xml for LG G8xPlease help me to get this files ASAP as i have hard bricked the mobile, all partitions deleted

[GUIDE][QFIL] FLASHING QFIL IMAGES [YU Yureka Black]

Procedure For Flashing/recovering your Garlic using QFIL/QPST Tool
REQUIREMENTS :
-A working PC.
-Qualcomm Drivers.
-QFIL Tools (I'd prefer and recommend ver2.0.05 as it is much more efficient than the newer ones) *Required .Net Framework 4.5 or higher
-ADB Drivers (just in case if your phone ain't bricked and you don't know how to boot into edl mode)
-N/M Full Firmware files (No the N-Firmware or M-firmware files provided by me).
-Back up your internal storage as this would wipe the internal (I prefer it this way)
-If you are using the QFIL 2.0.05, then you should install the tool.
-Extract the Firmware file and copy it to <directory where you installed qfil>/Qualcomm/bin/ this is to avoid sahara failed error.
-In simple words, keep the extracted firmware files inside the QFIL's folder.
-Connect your phone to PC and type in adb reboot edl in adb terminal to boot into EDL mode, or reboot edl in terminal emulator.
-If you have installed all drivers properly, your phone should be listed under Ports in Device Manager as Qualcomm Diganostic Device xx9008 (note this number, this is important) if your are getting 900E or 9003 (in case of bricked phone) you need to make it boot into 9008 mode using Deep Flash Cable (Guides to this will be provided soon, or you could just refer Google).
PROCEDURE :
-Open QFIL Tool.
-Once the phone is connected in EDL mode, it will show up under the ports (automatically selected, still if for any reason, open up and select port)
-Select Flat Build.
-Select the Programmer Path. It will open up the file browse window, go to the location where you have extracted the firmware and select Programmer_emmec_firehorse file.
-Select Patch File and select raw_unspare.xml file.
Now select Patch.xml.
-Click Download Button and flashing process will begin. Wait till it finishes and hold down your power button to boot your phone.
DOWNLOADS :
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul

pritish1998 said:
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul
Click to expand...
Click to collapse
Can you reupload Stock N Qfil?

Rose in YU YUREK∆ BL∆CK - TINNO p7201 | OFFICIAL
Tap here to view all notes in this chat.
t.me
user74354 said:
Can you reupload Stock N Qfil?
Click to expand...
Click to collapse

General X7 MAX and GT NEO FLASH/UBRICK INSTRUCTIONS

X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP
Please read all the information before proceeding.
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose DOWNLOAD ONLY mode and check all the boxes. DONT CHOOSE DIFFERENT MODE!!!!
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable. Dont turn ON phone! Go Fastboot mode ( Hold VOL- and Power button)
17) Launching RECOVERY.bat in the "Unlock Bootloader"folder.
18) Format Data in Recovery
The first download is long, we are waiting from 5 to 10 minutes.
19) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU WANT FLASH WITH LOCK BOOTLOADER
Skip the STEPS for unlocking and blocking the bootloder.
Uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
HOW FLASH BACKUP?
- Unlock Bootloader
- Download this: -=Backup Flash=-
- Unpack and copy your backup ROM_ files in this folder
- Choose scatter from this folder in SP Flash Tools
- Uncheck SECCFG (ROM_20) and flash ( Dont forget use MTKbypass utility and check port)
- After Flashig again go EDL mode and flash only SECCFG (ROM_20)
- Maybe need Format Data in Recovery
- Done

Hi please can you provide files for Realme GT Neo Flash Edition (FE) as it has the latest firmware A.11. You provided files for only GT Neo and X7 Max. Find attached a screenshot showing the current GT Neo Flash Edition Firmware. Thank you

mahotlov said:
X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose Download Only mode and check all the boxes.
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
View attachment 5415903
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable and turn ON phone.
The first download is long, we are waiting from 5 to 10 minutes. Has it started?
I recommend doing a full data reset.
If the device does not start after a long wait and reboots itself or freezes (rarely, but it is possible), go to Recovery and make Format Data.
How do load in Recovery? Press VOL - and the ON buttons, the phone will switch to fastboot mode.
Launching RECOVERY.bat in the "Unlock Bootloader"folder.
17) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Click to expand...
Click to collapse
Question #1. I'm having currently an unlocked bootloader, and custom GSI installed (GT Neo). Do i need another instructions to do?

philipjan26 said:
Question #1. I'm having currently an unlocked bootloader, and custom GSI installed (GT Neo). Do i need another instructions to do?
Click to expand...
Click to collapse
No. dont lock, firstly flash Firmwire

Update:
Im able to change my GT Neo ROM to Indian Variant. Thank you so much sir!
Experience:
Instruction #13-#15 are quite tricky.
Issues Encountered:
- my windows pc cannot detect the mediatek com port
- proper timing of clicking DOWNLOAD on SP Flash Tool
How i manage to proceed on SP FT Download:
- first turn off phone (assuming below instructions are DONE -> How i fixed (to detect):)
- SP Flash Tool needed Configs are Done (just waiting for the Downlolad to be clicked)
- MTK Bypass (Administration) is waiting for device
- after SUCCESS MESSAGE on MTK Bypass, immediately click on Download (SP FT)
- once download is started, you can unhold VOL - & + wait to be finished
How i fixed (to detect):
- downloaded this mediatek vcom drivers -> https://www.thecustomdroid.com/mediatek-preloader-usb-vcom-drivers/
- there are some popup that appear (i forgot to remember), i just clicked yes
- then restart pc
- turn off device
- open LIBUSB Filter device (Goal is to detect "Mediatek xxxxx yyyyy zzzzz" usb device on the list)
- Hold VOL - & VOL + AND PLUG Type C Cable
- Check the LIBUSB Filter list and once you see any "MEDIATEK ZZZZZ XXX" click and install
- once success, you can go to -> How i manage to proceed on SP FT Download:
Hope that helps! Thank you .

[email protected] said:
Hi please can you provide files for Realme GT Neo Flash Edition (FE) as it has the latest firmware A.11. You provided files for only GT Neo and X7 Max. Find attached a screenshot showing the current GT Neo Flash Edition Firmware. Thank you
Click to expand...
Click to collapse
You can use firmware for Gt Neo or X7 Max (better) for FE ver. phone

mahotlov said:
X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose Download Only mode and check all the boxes.
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
View attachment 5415903
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable and turn ON phone.
The first download is long, we are waiting from 5 to 10 minutes. Has it started?
I recommend doing a full data reset.
If the device does not start after a long wait and reboots itself or freezes (rarely, but it is possible), go to Recovery and make Format Data.
How do load in Recovery? Press VOL - and the ON buttons, the phone will switch to fastboot mode.
Launching RECOVERY.bat in the "Unlock Bootloader"folder.
17) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Click to expand...
Click to collapse
Following your instruction properly.. but still getting this error while flashing.
@mahotlov please take a look into this.

MahiSingh083 said:
View attachment 5416559
Following your instruction properly.. but still getting this error while flashing.
@mahotlov please take a look into this.
Click to expand...
Click to collapse
You flash with lock bootloader.
Uncheck boxes from:
opporeserve2
cdt_engineering
md1mg

Guys, i have a doubt i am gonna buy this phone like in a week so when u buy the phone does it come with latest update (a.18) or it comes with a.15 y am asking is becoz in a.16,17,18 to many bugs so only anyone reply me

TeckySairam said:
Guys, i have a doubt i am gonna buy this phone like in a week so when u buy the phone does it come with latest update (a.18) or it comes with a.15 y am asking is becoz in a.16,17,18 to many bugs so only anyone reply me
Click to expand...
Click to collapse
It does not matter since it is easy to downgrade to a15 as per the OP instructions. I tried this multiple times.

vikas776 said:
It does not matter since it is easy to downgrade to a15 as per the OP instructions. I tried this multiple times.
Click to expand...
Click to collapse
KK Thnx For Quick Reply!!

It works great, @mahotlov thank you for sharing this, for your help, and guys this is legit, follow carefully the steps.

Thanks for this worked perfectly.
One thing to note you have to work fast when put into MTK mode as it will disconnect rather quickly.

Thank you. Totally worth the time. The x7 Max firmware feels much better than the GT Neo one.

mahotlov said:
X7 MAX and GT NEO FLASH/UBRICK
CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)
BACKUP
Please read all the information before proceeding.
1) In Developer options need turn "ON", "OEM unlock" and USB Debug.
2) Unlock your bootloader.
Spoiler: UNLOCK INSTRUCTION
-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899
We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901
The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.
Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.
Click " Start deep testing”
3) Disable Driver Signature Enforcement in Windows 10: Video tutorial
4) Download all utilites and unpack: Programms and Drivers
5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)
Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)
6) Install VCOM drivers and libusb
7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire
8) In Download Agent choose MTK_AllInOne_DA.bin
9) GO options-->Connections--> choose UART and Band rate: 921600
10) Choose Download Only mode and check all the boxes.
11) Power OFF Phone and unplag usb cable
12) Open" MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"
13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!
After connect usb cable in MTKAuthBypassTool_V6 you can see this:
View attachment 5415903
14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port
15) After this message click "DOWNLOAD" in FlashTools
(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)
16) Unplag USB cable. Dont turn ON phone! Go Fastboot mode ( Hold VOL- and Power button)
17) Launching RECOVERY.bat in the "Unlock Bootloader"folder.
18) Format Data in Recovery
The first download is long, we are waiting from 5 to 10 minutes.
19) LOCK BOOTLOADER AGAIN
This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work
- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.
Done. Congratulations. You have stock clean firmwire with OTA and full work services!
IF YOU WANT FLASH WITH LOCK BOOTLOADER
Skip the STEPS for unlocking and blocking the bootloder.
Uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg
IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12
ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Click to expand...
Click to collapse
as i have x7 max(INDIA) , can i install realme gt neo deep testing apk and unlock its bootloader and after flashing the firmware can i get backk to the locked bootloader state ?? through your.bat file or i"ll get stuck on image destroyed page ??

great!
Could you guide how to go back to gt neo firmware from X7 Max firmware??
And anyway to remove the google dialer? too annoying

abidrockzx said:
as i have x7 max(INDIA) , can i install realme gt neo deep testing apk and unlock its bootloader and after flashing the firmware can i get backk to the locked bootloader state ?? through your.bat file or i"ll get stuck on image destroyed page ??
Click to expand...
Click to collapse
You can use Deep apk for X7 Max or GT Neo. No problem
Shou1814 said:
great!
Could you guide how to go back to gt neo firmware from X7 Max firmware??
And anyway to remove the google dialer? too annoying
Click to expand...
Click to collapse
1. Yes. Everything is the same, just use the firmware for Gt neo( A27)
2. Remove without root- No.
You can use another dialer

mahotlov said:
You can use Deep apk for X7 Max or GT Neo. No problem
1. Yes. Everything is the same, just use the firmware for Gt neo( A27)
2. Remove without root- No.
You can use another dialer
Click to expand...
Click to collapse
i do the same to come back into gt neo but it appear that
Please help me
Thanks

Shou1814 said:
View attachment 5437159
i do the same to come back into gt neo but it appear that
Please help me
Thanks
Click to expand...
Click to collapse
I need full screenshot FlashTools and Mtkauthbyoass tool

mahotlov said:
I need full screenshot FlashTools and Mtkauthbyoass tool
Click to expand...
Click to collapse
i uncheck 3 option (locked bootloader), UART : 921600 and already check com port
still not run

Question Redmi Note 10 5G can't install fastboot with miflash

Hey all.
I tried getting the Fastboot rom onto my phone but nothing works. I keep getting errors like **FAILED (Error reading sparse file)**
At this point I don't know what to do, I might go to Xiaomi to show them it and possibly get them to do something about it.
EDIT!!!:
I fixed it, changed folder name to x and worked. Thanks to NOSS8 for trying to help

ThePhoneUser0 said:
Hey all.
I tried getting the Fastboot rom onto my phone but nothing works. I keep getting errors like **FAILED (Error reading sparse file)**
At this point I don't know what to do, I might go to Xiaomi to show them it and possibly get them to do something about it.
Click to expand...
Click to collapse
Check here that everything is correct or use the bat file included in the Fastboot rom.
A few tips: use a USB2 port, another version of Miflash, the path C:\miflash
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com

NOSS8 said:
Check here that everything is correct or use the bat file included in the Fastboot rom.
A few tips: use a USB2 port, another version of Miflash, the path C:\miflash
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Tried all that, nothing worked.

ThePhoneUser0 said:
Tried all that, nothing worked.
Click to expand...
Click to collapse
Post the Miflash log (Miflash/log folder).

Sure.

Post the largest log in size.

Here.

For some reason it didn't post.
I'll just put it on mediafire.
MediaFire
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

NOSS8 said:
Post the largest log in size.
Click to expand...
Click to collapse

Try an older version of Miflash.

NOSS8 said:
Try an older version of Miflash.
Click to expand...
Click to collapse
I tried that yesterday, it was the version 2021 08 13

Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
https://www.dmrepairtech.com/2021/12/mtk-client-tool-v52-unlocktool.html

NOSS8 said:
Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
Click to expand...
Click to collapse
Interesting, i'll try tomorrow around 16:00 UTC

NOSS8 said:
Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
https://www.dmrepairtech.com/2021/12/mtk-client-tool-v52-unlocktool.html
Click to expand...
Click to collapse
I unlocked the bootloader again (with mtkclient) but don't know how to use sp flash tool as of course I never used it and its my first time flashing a MediaTek device

ThePhoneUser0 said:
I unlocked the bootloader again (with mtkclient) but don't know how to use sp flash tool as of course I never used it and its my first time flashing a MediaTek device
Click to expand...
Click to collapse
I can't tell you more, never had Media Tek devices.
How to use SP Flash Tool
Step 1: To get started, download SP flash tool compressed file (Smart Phone Flash Tool) and extract it on your computer.
Step 2: Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.
Step 3: Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).
Power Off Android Device
Step 4: Next, go to the extracted folder in Step 1 and click “Flash_tool.exe” to launch SP flash tool.
Launch SP Flash Tool
Step 5: Now in the SP Flash tool window, click on “Download” tab.
Download Tab SP Flash Tool
Step 6: Next, in the download tab click on “scatter-loading” button.
Scatter Loading SP Flash Tool
Step 7: Now click on “Open Scatter File” and choose the scatter file from Step 2.
Choose Scatter File SP Flash Tool
Step 8: Next, click on the “Download” button to launch the firmware flashing process.
Download Button SP Flash Tool
Step 9: Now connect your Android device to the computer using the original USB data cable while pressing Volume up or Volume down button.
Step 10: The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in Smart Phone Flash Tool.
Download Ok SP Flash Tool
Step 11: Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer.

This tool also
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/

NOSS8 said:
I can't tell you more, never had Media Tek devices.
How to use SP Flash Tool
Step 1: To get started, download SP flash tool compressed file (Smart Phone Flash Tool) and extract it on your computer.
Step 2: Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.
Step 3: Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).
Power Off Android Device
Step 4: Next, go to the extracted folder in Step 1 and click “Flash_tool.exe” to launch SP flash tool.
Launch SP Flash Tool
Step 5: Now in the SP Flash tool window, click on “Download” tab.
Download Tab SP Flash Tool
Step 6: Next, in the download tab click on “scatter-loading” button.
Scatter Loading SP Flash Tool
Step 7: Now click on “Open Scatter File” and choose the scatter file from Step 2.
Choose Scatter File SP Flash Tool
Step 8: Next, click on the “Download” button to launch the firmware flashing process.
Download Button SP Flash Tool
Step 9: Now connect your Android device to the computer using the original USB data cable while pressing Volume up or Volume down button.
Step 10: The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in Smart Phone Flash Tool.
Download Ok SP Flash Tool
Step 11: Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer.
Click to expand...
Click to collapse
Keeps saying I need the auth file.

Database Develop

welcome