hi, as i mentioned in the title: i am in that twrp recovery, I am not able to check the files of realme ui OS zip file. i am able to copy the OS zip file to internal storage but i am not able see those files in twrp recovery. currenlty no OS is installled in my X2pro. need suggestions. should i download and flash another twrp file of lower version to check the same?
Related
I posted the original version of this guide in the Pixel Experience forum because I needed a way to recover the stock Oniichan kernel from the PE ROM after I had flashed other kernels over it, without first backing up my boot partition. This is because the latest Oniichan kernel isn’t posted online, unlike Genom, Predator, etc. This solution uses OrangeFox and can be applied to any ROM with minor modification.
The ROM file that you flashed to your phone should include a boot image file called boot.img which contains the kernel. So, we simply extract boot.img from the ROM and flash this image to the Android boot partition. This will replace the new kernel with the stock kernel from our ROM, after which we re-flash Magisk if we need root (no need to re-flash modules), and we should be back to stock. Here are the steps to restore your stock kernel:
1. Retrieve a copy of your current ROM zip file
2. Expand zip file and extract boot.img
3. Save boot.img to phone storage (e.g., SD card)
4. Reboot phone into OrangeFox recovery
5. Do OrangeFox backup of boot partition (e.g., to SD card)
6. Select the boot.img file and attempt to flash it normally
7. From choice of target partitions select “Boot”
8. Swipe right to install image as instructed
9. Flash should complete in 10-15 seconds
10. Re-flash Magisk to restore root if needed (no need to re-flash modules)
11. Reboot phone to system
12. In settings check kernel version to verify desired kernel was restored
FYI, you can use this method to extract the kernel from any ROM and flash it to your phone, but you should first verify that the new kernel is compatible with your current ROM before you flash it. Please let me know if you have any questions. Good luck!
thx
Thanks
mirdem said:
Thanks
Click to expand...
Click to collapse
You're welcome.
I just flashed Pixel and NGK (both latest) today. By flashing the boot.img does it remove all of my data? Or It'll flash only for the kernel itself?
I Made both a fold with. Bat executable files to double click on and install boot.img files that have twrp and magisk preinstalled. Also a secondary executable that copy both magisk2.1.4 and a orangefox recovery zip files to your phone once in recovery or adb mode.
Just made them as quick installers and restoring root on The phone.
Installation
1. Extract zip file.
2. Goto bootloader mode or recovery mode. (bootloader mode to install root/twrp and recovery mode to send files to your phone.)
3. Just goto the folder and execute either. Bat files you want.
Enjoy
10.3.8
Beta2
{Mod edit: Links removed}
spheady said:
I Made both a fold with. Bat executable files to double click on and install boot.img files that have twrp and magisk preinstalled. Also a secondary executable that copy both magisk2.1.4 and a orangefox recovery zip files to your phone once in recovery or adb mode.
Just made them as quick installers and restoring root on The phone.
Installation
1. Extract zip file.
2. Goto bootloader mode or recovery mode. (bootloader mode to install root/twrp and recovery mode to send files to your phone.)
3. Just goto the folder and execute either. Bat files you want.
Enjoy
10.3.8
Beta2
Click to expand...
Click to collapse
Is this for oos 11 beta 2
spheady said:
Yeah. It just installs the Open beta 2 boot. Img with a batch file inside the folder i made. Make sure you don't run the other version I made for oxygen 10.3.8. Theirs another batch file I also included witch sends the orangefox recovery and a magisk zip file. It should help ad I just tested today before uploading it to my mega. Nz cloud.
Click to expand...
Click to collapse
Ok so i tried this last night it does install the orangefox recovery but still cant boot recovery without getting stuck on the screen flashing so i just flashed my own patched boot.img do you have a working recovery on your device
if so can you help me get it to flash to y device im on beta2 gm1917 8gb 256gb
I'd advise against using this. I received a virus message for Troj/Agent-ABZF.
@spheady THREAD CLOSED pending investigation! Download links removed.
Downloads checked by VirusTotal:
VirusTotal
VirusTotal
www.virustotal.com
VirusTotal
VirusTotal
www.virustotal.com
Please contact me or any other moderator and explain how these results are possible!
REQUIRED CONDITION: YOUR PHONE MUST SUPPORT Project Treble
(if you don't know if your phone supports project treble , download Treble Check on Play Market)
i installed android 12 gsi on my A70 (a70q)
1) download GSI https://developer.android.com/topic/generic-system-image/releases, choose the version you need (gms-google services)
2)open your .zip archive и extract the file system.img to your SD card
3)download permissiver_v5.zip https://androidfilehost.com/?fid=6006931924117940902, and copy to SD card
4)reboot your phone in download mode
5)flash twrp and vbmeta via odin(bootloader must be unlocked)
6)reboot to recovery twrp
7)on twrp- wipe->advanced wipe->select Dalvik, Cache, System, Data
8)install-select storage(your sd)->install image (select system.img) and swipe
9)reboot-power off
10)boot in twrp
11)mount-select Vendor
12)advanced-file manager->vendor/overlay and select delete this folder
13)install-permissiver_v5.zip
14)reboot system
hello, I wanted to know if the fingerprint works when installing android 12, the truth is that I am interested in installing android 12 gsi I have a samsung A70MN
Its working
As you know, you need to upgrade the modem and radio firmware from 6.0.1 Android version to make the latest LineageOS or other ROM to work.
You can't do this for this specific device, SM-G900X (Galaxy S5 Live Demo Unit), as the ODIN will fail to flash the files.
But you can modify the ROM to make it past boot-loop quite easy.
Here's what you need to do in order to make it work:
Install latest TWRP for TWRP for KLTE;
You can do this with both ODIN or direct upgrade using TWRP image inside TWRP;
Boot into the TWRP;
Load a ROM .zip on the device like crDroid;
You can upload to SDCard using USB while on TWRP;
Wipe everything (except Internal SD Card);
Install the ROM;
Check if it boot-loop;
Now you need to fix the ROM, which is quite easy:
Boot back into the TWRP recovery;
Go to: Mount -> System (check);
Go back;
Go to: Advanced -> File Manager;
Navigate to: /system/vendor/lib;
Delete or rename: libsec-ril.gsm.so, libsec-ril.usc.so, libsec-ril.vzw.so;
Reboot and enjoy .
what if those files are not present in vondor/lib folder and still is boot loop
G900X is on snapdragon or exynos?
i was flashed with twrp custom recovery by using Odin tool . But when I enter the twrp menu ...
I was not able to find the magisk zip file
Even though i put it my internal storage before . But it was not showing twrp menu
After flashing with twrp recovery. I cannot acess my storage of m20 device in my laptop . Is there any way put magisk zip to internal storage of m20 device ..
Please help me if solution exist . Sorry for bad english
ever heard of adb? you can push files to phone, or pull files out of device.
https://developer.android.com/studio/releases/platform-tools
twrp also has command line tool to install zip files without touch screen.
https://twrp.me/faq/openrecoveryscript.html
but note the way you're trying to install Magisk is outdated, most likely you're following any random unofficial tutorial. according to official installation instructions, the whole ROM has to be patched from Magisk apk.
https://topjohnwu.github.io/Magisk/install.html#instructions