Database Develop

[ROM][YT-X703L][7.1.x] unofficial crDroid 3.x for Lenovo Yoga Tab 3 Plus LTE

Code:
*** Disclaimer
I am not responsible for any damage you made to your device.
You have been warned. ***
Introduction
This is a port of crDroid 3.8.5 for the Lenovo Yoga Tab 3 Plus LTE (LTE only!).
Credits:
@matshias and @DerEineDa for their excellent work on the LineageOS port to the YT-X703F.
@vladimiroltean for his LineageOS port to the YT-X703L. He did all the work.
Please refer to their thread on the LOS port for more information https://forum.xda-developers.com/thinkpad-tablet/development/unofficial-lineageos-14-1-lenovo-yoga-t3561457.
Source crDroid
Download:
Current version on AFH: crDroid 3.8.5 (crDroidAndroid-7.1.2-20180227-YTX703L-v3.8.5.zip)
Previous versions on AFH:
crDroid 3.8.5 (crDroidAndroid-7.1.2-20180120-YTX703L-v3.8.5.zip)
crDroid 3.8.4
crDroid 3.8.3
Before flashing, always have a full functional backup. Just in case!
Installation:
Install TWRP, wipe system + data, flash crDroid, reboot.
Flash gapps after the first reboot.
Changelog:
2017-02-27: Update to crDroid 3.8.5 (Februar 2018 Lineage OS security fixes)
2017-01-20: Update to crDroid 3.8.5 (Januar 2018 Lineage OS security fixes)
2017-12-14: Update to crDroid 3.8.4 (December 2017 Lineage OS security fixes)
2017-11-21: Update to crDroid 3.8.3
2017-10-31: Update to crDroid 3.8.2

Have crDroid on my S6 phone and its great. Was only looking the other day for a decent custom rom for my tab and this week here one is
Only dont think it will work as not lte but 350 F. What do you think ?

cleverdicky said:
Only dont think it will work as not lte but 350 F. What do you think ?
Click to expand...
Click to collapse
Please do not try this on any other hardware than a YT-X703L.

Update to crdroid 3.8.3, November 2017 security patches.
Download: crdroid 3.8.3 for YT-703L

tab 3 plus wifi
but only wifi development is there anymore?

Renval said:
but only wifi development is there anymore?
Click to expand...
Click to collapse
Sorry - i build and test the LTE version only. :laugh:

Hi friends,
amazingly what you are done. After the last update from lenovo (20170824 or earlier) the sound of this tablet is very bad because dolby is shut down.
With you ROM and the thread of matshias, the lenovo LTE version now is fantastic. Extremely fast, super sound.
What I have done:
with minimal adb (see matshias Thread forum.xda-developers.com/thinkpad-tablet/general/beta-twrp-root-disable-encryption-yoga-t3538017) flased this custom ROM
after that flashed dolby atmos and open gapps (arm64, 7.1, nano)
- and voilà it's running very well - better than before!!! DRM Level is L1 so it should work with Amazon and Netflix (but can't test it)
Thank you again to all the involved guys
---------- Post added at 09:39 PM ---------- Previous post was at 09:34 PM ----------
Renval said:
but only wifi development is there anymore?
Click to expand...
Click to collapse
Have you checked this Thread : forum.xda-developers.com/thinkpad-tablet/development/unofficial-lineageos-14-1-lenovo-yoga-t3561457

Hi, are there any known issues with the rom?
I installed LineageOS on my Tab 3 Plus LTE(experimental version) before. Unfortunately the cam (for skype), screen mirroring and the micro in whatsapp didn`t work. Thats why I uninstalled LOS and current I use stock.
Regards!

Both cameras and the microphone work for me. You did grant the apps access?

Yes, I did! But in LineageOS they didn`nt work
But now I jumped in at the deep end
I installed crDroid without waiting for an answer , of course backup before!
And now, wow, it works very fine. I can use all features, many thx to the author!!
Now crDroid and nova launcher, both are as couple, one of the the finest roms!
Thank you!

Thank you. Worked perfect here!

Thanks for the custom rom. Finally, my xbox one controller connects via bluetooth. Sometimes the connection breaks off.
Maybe you can find a solution.
I am grateful to you now.
Best regards
Gesendet von meinem Moto G4 Plus mit Tapatalk

I have rebuild the rom and updated the files in the first post with an updated crDroid 3.8.4. This includes the December 2017 Lineage OS security patches.
Have fun, stay safe!

Hi, Tribble, thx for the update! Befor flashing I first will backup my system. Can I restore the data section after flashing or is it necassary to reorganize?

launcher20 said:
Befor flashing I first will backup my system. Can I restore the data section after flashing or is it necassary to reorganize?
Click to expand...
Click to collapse
I upgraded with a dirty flash - just clear dalvik and cache. No issues...

Hi Tribble, I meaned the data of previous version 3.83, can i restore them with twrp? If not, then only dirty flash and renew? Clear calvik and cache ok!

launcher20 said:
Hi Tribble, I meaned the data of previous version 3.83, can i restore them with twrp? If not, then only dirty flash and renew? Clear calvik and cache ok!
Click to expand...
Click to collapse
Dirty flashing does not clear data, only system.
That said - with a full backup you can always go back if something went wrong.
(Always have a good and tested backup, preferably stored outside your device!)

Hello everybody.
Can anyone check the operation of the USSD function on this ROM?

pakster67 said:
Hello everybody.
Can anyone check the operation of the USSD function on this ROM?
Click to expand...
Click to collapse
USSD codes do not seem to work. I never used one on the tablet, so i did not notice. Needs investigating...

Tribble said:
USSD codes do not seem to work. I never used one on the tablet, so i did not notice. Needs investigating...
Click to expand...
Click to collapse
Thanks for your answer. Already checked it and USSD function work perfect.
Thanks for a grate ROM.

TWRP 3.2.1-0 not working

Hi Folks...
Got me an Samsumg Galaxy S3 GT-I9305.
I tried to install RR, so first step obviously was getting TWRP 3.2.1-0-i9305.img.tar.
Downloaded over at https://dl.twrp.me/i9305 the said version.
Installed with Odin V3 and everything came up clear but when i tried to boot into recovery i got stuck in Bootlogo
Playing around for a while i decided to install TWRP 3.0.2-1 which worked fine on first try.
Tried to flash the 3.2.1-0-i9305.img via TWRP gave me the error message "File is too big".
Can anyone confirm?

That version is too big for the recovery partition on our device.. Need someone to compress it to make it smaller to fit the partition size of the device.

I have the same problem with the last version TWRP 3.2.1.0.
When I push this one with Odin 3.12, all is sucess but when i reboot the device in custom recovery, it can't, it is stuck

S3 GT-I9305 Specific?
Lexington67 said:
Hi Folks...
Got me an Samsumg Galaxy S3 GT-I9305.
I tried to install RR, so first step obviously was getting TWRP 3.2.1-0-i9305.img.tar...
Click to expand...
Click to collapse
TWRP 3.2.1-0 works great on my S3 i9300, flashed from the external SD card so could you please edit your thread title and add: S3 GT-I9305?
Thanks!

curiousrom said:
TWRP 3.2.1-0 works great on my S3 i9300, flashed from the external SD card so could you please edit your thread title and add: S3 GT-I9305?
Thanks!
Click to expand...
Click to collapse
This thread is in the gt-i9305 help n troubleshooting section btw.. So there's nothing to edit. Correct me if im wrong.

Lexington67 said:
Can anyone confirm?
Click to expand...
Click to collapse
Confirmed also. Unable to use 3.2.1-0 for install/upgrade.
3.0.2-1 works fine, https://dl.twrp.me/i9305/twrp-3.0.2-1-i9305.img.html

Working 3.2.1-0 credit goes to @Option58 the one who compress it. Thank him. Enjoy guys.
https://androidfilehost.com/?fid=817906626617954564

Official TWRP 3.2.1-0 for i9305 Problem Reported to TeamWin TWRP
@Lexington67 @public3n3my @GouLt @mouth
I reported the problem to the TeamWin TWRP so other S3 i9305 users don't waste their time with this version:
Hello, several XDA i9305 users report here
that version TWRP 3.2.1-0 returns error: "File is too big".
https://forum.xda-developers.com/galaxy-s3/help-i9305/twrp-3-2-1-0-t3720311/
https://dl.twrp.me/i9305/
Click to expand...
Click to collapse
And they promptly replied:
Thanks for the report. I have removed it from the download section of twrp.me and disabled future builds until someone can fix the issue.
Click to expand...
Click to collapse
Awesome support from a non-profit open source community project IMO.
***

I'm working on my own TWRP device tree, based on official LineageOS repos, with the intention of getting official support for version 3.2.1-0. I'll create my own thread when my build is ready. According to TWRP's official page for the i9305, there is no current official maintainer.
Edit: I compiled a 3.2.1-0 build and created a separate thread: https://forum.xda-developers.com/galaxy-s3/development-i9305/recovery-twrp-3-2-1-0-t3741413

[TWRP] [SELF-BUILD] TWRP 3.2.1-0 for Redmi Note 3 Snapdragon (kenzo/kate)

This is my build of Team Win Recovery Project (TWRP) 3.2.1-0 for Redmi Note 3 Snapdragon (kenzo/kate)
Kernel source is originally from @abhishek987
This is not official build from twrp.me, use at your own risk
I added subpartition links for backup whole firmware in the phone
Download:
https://sourceforge.net/projects/rn3-los15/files/TWRP/
Since TWRP is open-source, my source (manifest,device and kernel) is here:
https://github.com/rn3-twrp/manifests
https://github.com/rn3-twrp/android_device_xiaomi_kenzo
https://github.com/rn3-twrp/android_kernel_xiaomi_msm8956
https://github.com/rn3-twrp/proprietary_vendor_xiaomi

Ab8 said:
Hay your twrp how to download
Click to expand...
Click to collapse
Just click the first link
The prebuilt image is uploaded to github

Does it work on 2gb too

manudhomra said:
Does it work on 2gb too
Click to expand...
Click to collapse
If official two.me one works on 2gb
This should work too.
I just forked the official tree and fixed something for building on omni Oreo tree (currently official twrp.me is build on nougat tree, not updated)
And changed the recovery kernel to @abhishek987 one

I had extractorfork() issue on the official build when restoring a backup. Does your recovery fixed that?

What are the benefits of this recovery? Less bugs? Which? Extras?

Hi, I will update a new build of a this recovery soon.
For some fixing and build on latest omni 8.1 tree.

LokManSiu said:
Hi, I will update a new build of a this recovery soon.
For some fixing and build on latest omni 8.1 tree.
Click to expand...
Click to collapse
Thnx for sharing n for ur hard work ?

Zalwani7395 said:
Thnx for sharing n for ur hard work
Click to expand...
Click to collapse
Thanks.
And I will become a senior member soon, already 97th posts for me.

The best twrp build I ever flashed, thanks

Official twrp gives me extractor fork error 7 when restoring a backup. Does this have the same problem?

shawon11 said:
Official twrp gives me extractor fork error 7 when restoring a backup. Does this have the same problem?
Click to expand...
Click to collapse
No, this is oreo based build, official still uses nougat trees.

LokManSiu said:
No, this is oreo based build, official still uses nougat trees.
Click to expand...
Click to collapse
Thanks. I usually like redwolf for it's extra options. But lately it's anti piracy thingy is getting a bit too annoying.

Does this TWRP Need No Verity Zip???

The time won't set properly for me, have factory reset twrp and booted before returning to recovery. Anyone else have this issue?

hey man this one worked to identify 8.1 beta lineage os 15.1
whats the order to install firmware os kernel?
which frimware is recomended?

Does this TWRP need lazy flasher while flashing miui

Can u please add feature passwordd protection?
Thx

manudhomra said:
Does it work on 2gb too
Click to expand...
Click to collapse
yes , it worked .
and its feature is its never shows error 7,while many times offical TWRP shows error .
:good:

Wow ☺
---------- Post added at 02:54 AM ---------- Previous post was at 02:53 AM ----------
Sampath521 said:
Does this TWRP need lazy flasher while flashing miui
Click to expand...
Click to collapse
+1

[DEV][TREBLE] P-based vendor implementation

I guess that's going to be helpful for both developers and users.
Info:
P-based vendor up to date with Lineage 16.0 device trees and kernel
Full and proper support of the versioned VNDK and linker namespace isolation
Instructions:
I'm not going to provide them, just head here instead: https://forum.xda-developers.com/mi-a1/how-to/treble-stock-to-treble-everything-to-t3793734
As usual, it requires repartitioning.
Downloads:
Treble-enabled unofficial Lineage 16.0 build (already includes vendor) not updated since 05.04.2019
vendor.img and boot.img (01.05.2019)
Source code:
Common tree
Device tree
Kernel patch
Vendor blobs
Notes:
I did it for pure fun and I'm not going to provide any extensive support. So don't expect me to update it daily and fix every bug you'll cry about.
Just like any other proper Treble implementation, this doesn't include IMS blobs on the vendor partition. So no out-of-the-box VoLTE on your fancy GSIs.
Basic functionality is verified with AOSP P GSIs

Amazing! Thanks Flex!

And before anyone actually asks that: yes, it works with official Q GSI without any modifications, but has Wi-Fi issues just like everyone else.

Awesome news and great work!
Thank you so much for this.

Amazing work Bra but you already know that xD

Another great work from you. Kudos.

MASTER!

Awesome stuff, thanks for this.

can i ask . i want to flash android Q so i just need the vendor only right?

Your on on this device is amazing, than you so much!

Great job man! Thanks

flex1911 said:
And before anyone actually asks that: yes, it works with official Q GSI without any modifications, but has Wi-Fi issues just like everyone else.
Click to expand...
Click to collapse
What issues? Wifi completely not working or..?

Hi @flex1911
I tried everything, but your vendor and your LineageOS gives me black screen on Tissot.
Also it corrupts my recovery, I can't boot into it :/
I have this issue after flashing the "boot.img"

Iv4n99 said:
Hi @flex1911
I tried everything, but your vendor and your LineageOS gives me black screen on Tissot.
Also it corrupts my recovery, I can't boot into it :/
I have this issue after flashing the "boot.img"
Click to expand...
Click to collapse
This vendor is for Treble roms, you don't need it if youre using Flex' LOS16

Yunikari said:
This vendor is for Treble roms, you don't need it if youre using Flex' LOS16
Click to expand...
Click to collapse
I'm trying to flash the official Q gsi
But It gives me black screen
The vendor isn't compatible with my phone

Iv4n99 said:
Hi @flex1911
I tried everything, but your vendor and your LineageOS gives me black screen on Tissot.
Also it corrupts my recovery, I can't boot into it :/
I have this issue after flashing the "boot.img"
Click to expand...
Click to collapse
Try to update your firmware.

flex1911 said:
Try to update your firmware.
Click to expand...
Click to collapse
Artem u are on fire. I bought this device after Asus. And glad you are here ?... Thanks buddy.

great work!

Nice.

Is boot.img the kernel? Sorry if it's a stupid question, and does it work with 4.9 kernels?

LineageOS 17.1 on santoni.

Do you guys think that LOS 17.1 Will be officially released to our santoni along with the lineage recovery?
If yes, why ?
If no, why ?

For me it does not matter if lineage os is official or not as long as the rom is stable and maintained timely.

metelhammer said:
For me it does not matter if lineage os is official or not as long as the rom is stable and maintained timely.
Click to expand...
Click to collapse
In this case, if there is no OFFICIAL, where can I download the latest UNOFFICIAL ROM ?

Lukiwwy said:
In this case, if there is no OFFICIAL, where can I download the latest UNOFFICIAL ROM ?
Click to expand...
Click to collapse
Get it here https://sourceforge.net/projects/santoni-4x/files/
For further updates keep checking for updates here.
if developer wish to continue then we should get updates there and on there should be xda thread.
However i have not tried this build yet.

metelhammer said:
Get it here https://sourceforge.net/projects/santoni-4x/files/"]https://sourceforge.net/projects/santoni-4x/files/
For further updates keep checking for updates here.
if developer wish to continue then we should get updates there and on there should be xda thread.
However i have not tried this build yet.
Click to expand...
Click to collapse
Thanks for the link from ROM :good:
Are you following the installation procedure?
Wipe: system, date, cache, vendor? (Wipe vendor or not Wipe vendor) and installs rom via TWRP ?
or
install as with Official LineageOS installation via adb ?

Lukiwwy said:
Thanks for the link from ROM :good:
Are you following the installation procedure?
Wipe: system, date, cache, vendor? (Wipe vendor or not Wipe vendor) and installs rom via TWRP ?
or
install as with Official LineageOS installation via adb ?
Click to expand...
Click to collapse
As i said earlier i have not tried this ROM yet and there is no anything special mentioning of flashing procedure so flashing should be normal as usual. device trees are from havoc os.
wiping system,cache,data should be as usual as we change between different rom. just make sure to use latest recovery.
don't wipe internal storage,but do backup everything as precaution.

metelhammer said:
As i said earlier i have not tried this ROM yet and there is no anything special mentioning of flashing procedure so flashing should be normal as usual. device trees are from havoc os.
wiping system,cache,data should be as usual as we change between different rom. just make sure to use latest recovery.
don't wipe internal storage,but do backup everything as precaution.
Click to expand...
Click to collapse
OK thanks.
In my free time I will test

Hello there,
just wondering: as crDroid 7.x is available for santoni, how come there is no LineageOS 17.x available for it?
To my understanding crDroid 7.x should be based on the latest LineageOS 17.x - which is not available - ???
Thanks for any insight on this.
cu,
einnarr

einnarr said:
Hello there,
just wondering: as crDroid 7.x is available for santoni, how come there is no LineageOS 17.x available for it?
To my understanding crDroid 7.x should be based on the latest LineageOS 17.x - which is not available - ???
Thanks for any insight on this.
cu,
einnarr
Click to expand...
Click to collapse
Lineage OS 18.1 Unofficial based on Android 11 R is already available for Redmi 4X like Lineage OS 17.X Unofficial was available, the only exception with Lineage OS 17.X was it never went official. And i am not sure if Lineage OS 18.1 will go official.
You can try/use Lineage OS 18.1 Unofficial based on Android 11 R.
Just make sure to backup everything including backup of Persist and EFS and clean flash.

Hello metelhammer,
thanks for the clarification. As I can't find anything on the forum here in the ROM section - could you pinpoint me where to look for LOS17/18 ROMs for santoni?
Thx,
einnarr

This is telegram group for Redmi 4X https://t.me/s/r4xdownloads you can stay updated here with official and unofficial builds, mostly almost all builds are listed here.

einnarr said:
Hello metelhammer,
thanks for the clarification. As I can't find anything on the forum here in the ROM section - could you pinpoint me where to look for LOS17/18 ROMs for santoni?
Thx,
einnarr
Click to expand...
Click to collapse
This is telegram group for Redmi 4X https://t.me/s/r4xdownloads you can stay updated here with official and unofficial builds, mostly almost all builds are listed here.

Hello, thanks for the directions. After getting Telegram installed, I found the current ROMs at sourceforge here:
Jabiyeff-build
Download Jabiyeff-build for free. None
sourceforge.net
Looks good so far

einnarr said:
Hello, thanks for the directions. After getting Telegram installed, I found the current ROMs at sourceforge here:
Jabiyeff-build
Download Jabiyeff-build for free. None
sourceforge.net
Looks good so far
Click to expand...
Click to collapse
Happy to help you

einnarr said:
Hello, thanks for the directions. After getting Telegram installed, I found the current ROMs at sourceforge here:
Jabiyeff-build
Download Jabiyeff-build for free. None
sourceforge.net
Looks good so far
Click to expand...
Click to collapse
Is this rom reliable? Can we trust Jabiyeff?

Just installed it in the last days on three units - so far looking very good in daily use. Just have an issue with fingerprint sensor reacting differently after clean install.
"Trust" - what do you mean?

einnarr said:
Just installed it in the last days on three units - so far looking very good in daily use. Just have an issue with fingerprint sensor reacting differently after clean install.
"Trust" - what do you mean?
Click to expand...
Click to collapse
I don't known him, so i'm afraid to install and have some malware.

playerum said:
I don't known him, so i'm afraid to install and have some malware.
Click to expand...
Click to collapse
Your concern totally understandable, so in that case using trusted official ROMs would be better